Commit Graph

2662 Commits

Author SHA1 Message Date
Ming Lei a88d32af18 blk-merge: fix computing bio->bi_seg_front_size in case of single segment
When bio has only one physical segment, we should set bio's
bi_seg_front_size as the real(final) size of the single segment.

Fixes: 02e707424c2ea(blk-merge: fix blk_bio_segment_split)
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-30 13:02:36 -07:00
Hannes Reinecke bf4e6b4e75 block: Always check queue limits for cloned requests
When a cloned request is retried on other queues it always needs
to be checked against the queue limits of that queue.
Otherwise the calculations for nr_phys_segments might be wrong,
leading to a crash in scsi_init_sgtable().

To clarify this the patch renames blk_rq_check_limits()
to blk_cloned_rq_check_limits() and removes the symbol
export, as the new function should only be used for
cloned requests and never exported.

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Fixes: e2a60da74 ("block: Clean up special command handling logic")
Cc: stable@vger.kernel.org # 3.7+
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-29 14:37:27 -07:00
Eric Sandeen 77032ca66f Return EBUSY from BLKRRPART for mounted whole-dev fs
Today, blockdev --rereadpt /dev/sda will fail with EBUSY if any
partition of sda is mounted (and will fail with EINVAL if pointed
at a partition).  But it will pass if the entire block device is
formatted with a filesystem and mounted.  I don't think this makes
sense; partitioning should surely not ever change out from under
a mounted device.

So check for bdev->bd_super, and fail that with -EBUSY as well.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-25 20:49:24 -07:00
Jens Axboe dcd8376c36 Revert "blk-flush: Queue through IO scheduler when flush not required"
This reverts commit 1b2ff19e6a.

Jan writes:

--

Thanks for report! After some investigation I found out we allocate
elevator specific data in __get_request() only for non-flush requests. And
this is actually required since the flush machinery uses the space in
struct request for something else. Doh. So my patch is just wrong and not
easy to fix since at the time __get_request() is called we are not sure
whether the flush machinery will be used in the end. Jens, please revert
1b2ff19e6a. Thanks!

I'm somewhat surprised that you can reliably hit the race where flushing
gets disabled for the device just while the request is in flight. But I
guess during boot it makes some sense.

--

So let's just revert it, we can fix the queue run manually after the
fact. This race is rare enough that it didn't trigger in testing, it
requires the specific disable-while-in-flight scenario to trigger.
2015-11-25 10:12:54 -07:00
Christoph Hellwig 55ce0da1da block: fix blk_abort_request for blk-mq drivers
We only added the request to the request list for the !blk-mq case,
so we should only delete it in that case as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-24 15:24:10 -07:00
Linus Torvalds 4ce01c518e Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
 "A round of fixes/updates for the current series.

  This looks a little bigger than it is, but that's mainly because we
  pushed the lightnvm enabled null_blk change out of the merge window so
  it could be updated a bit.  The rest of the volume is also mostly
  lightnvm.  In particular:

   - Lightnvm.  Various fixes, additions, updates from Matias and
     Javier, as well as from Wenwei Tao.

   - NVMe:
        - Fix for potential arithmetic overflow from Keith.
        - Also from Keith, ensure that we reap pending completions from
          a completion queue before deleting it.  Fixes kernel crashes
          when resetting a device with IO pending.
        - Various little lightnvm related tweaks from Matias.

   - Fixup flushes to go through the IO scheduler, for the cases where a
     flush is not required.  Fixes a case in CFQ where we would be
     idling and not see this request, hence not break the idling.  From
     Jan Kara.

   - Use list_{first,prev,next} in elevator.c for cleaner code.  From
     Gelian Tang.

   - Fix for a warning trigger on btrfs and raid on single queue blk-mq
     devices, where we would flush plug callbacks with preemption
     disabled.  From me.

   - A mac partition validation fix from Kees Cook.

   - Two merge fixes from Ming, marked stable.  A third part is adding a
     new warning so we'll notice this quicker in the future, if we screw
     up the accounting.

   - Cleanup of thread name/creation in mtip32xx from Rasmus Villemoes"

* 'for-linus' of git://git.kernel.dk/linux-block: (32 commits)
  blk-merge: warn if figured out segment number is bigger than nr_phys_segments
  blk-merge: fix blk_bio_segment_split
  block: fix segment split
  blk-mq: fix calling unplug callbacks with preempt disabled
  mac: validate mac_partition is within sector
  mtip32xx: use formatting capability of kthread_create_on_node
  NVMe: reap completion entries when deleting queue
  lightnvm: add free and bad lun info to show luns
  lightnvm: keep track of block counts
  nvme: lightnvm: use admin queues for admin cmds
  lightnvm: missing free on init error
  lightnvm: wrong return value and redundant free
  null_blk: do not del gendisk with lightnvm
  null_blk: use device addressing mode
  null_blk: use ppa_cache pool
  NVMe: Fix possible arithmetic overflow for max segments
  blk-flush: Queue through IO scheduler when flush not required
  null_blk: register as a LightNVM device
  elevator: use list_{first,prev,next}_entry
  lightnvm: cleanup queue before target removal
  ...
2015-11-24 10:26:30 -08:00
Ming Lei 12e57f59ca blk-merge: warn if figured out segment number is bigger than nr_phys_segments
We had seen lots of reports of this kind issue, so add one
warnning in blk-merge, then it can be triggered easily and
avoid to depend on warning/bug from drivers.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-23 20:16:55 -07:00
Ming Lei 02e707424c blk-merge: fix blk_bio_segment_split
Commit bdced438acd83a(block: setup bi_phys_segments after
splitting) introduces function of computing bio->bi_phys_segments
during bio splitting.

Unfortunately both bio->bi_seg_front_size and bio->bi_seg_back_size
arn't computed, so too many physical segments may be obtained
for one request since both the two are used to check if one segment
across two bios can be possible.

This patch fixes the issue by computing the two variables in
blk_bio_segment_split().

Fixes: bdced438acd83a(block: setup bi_phys_segments after splitting)
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Mark Salter <msalter@redhat.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-23 20:16:53 -07:00
Ming Lei 578270bfbd block: fix segment split
Inside blk_bio_segment_split(), previous bvec pointer(bvprvp)
always points to the iterator local variable, which is obviously
wrong, so fix it by pointing to the local variable of 'bvprv'.

Fixes: 5014c311baa2b(block: fix bogus compiler warnings in blk-merge.c)
Cc: stable@kernel.org #4.3
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Mark Salter <msalter@redhat.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-23 20:16:51 -07:00
Jens Axboe b094f89ca4 blk-mq: fix calling unplug callbacks with preempt disabled
Liu reported that running certain parts of xfstests threw the
following error:

BUG: sleeping function called from invalid context at mm/page_alloc.c:3190
in_atomic(): 1, irqs_disabled(): 0, pid: 6, name: kworker/u16:0
3 locks held by kworker/u16:0/6:
 #0:  ("writeback"){++++.+}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730
 #1:  ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff8107f083>] process_one_work+0x173/0x730
 #2:  (&type->s_umount_key#44){+++++.}, at: [<ffffffff811e6805>] trylock_super+0x25/0x60
CPU: 5 PID: 6 Comm: kworker/u16:0 Tainted: G           OE   4.3.0+ #3
Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
Workqueue: writeback wb_workfn (flush-btrfs-108)
 ffffffff81a3abab ffff88042e282ba8 ffffffff8130191b ffffffff81a3abab
 0000000000000c76 ffff88042e282ba8 ffff88042e27c180 ffff88042e282bd8
 ffffffff8108ed95 ffff880400000004 0000000000000000 0000000000000c76
Call Trace:
 [<ffffffff8130191b>] dump_stack+0x4f/0x74
 [<ffffffff8108ed95>] ___might_sleep+0x185/0x240
 [<ffffffff8108eea2>] __might_sleep+0x52/0x90
 [<ffffffff811817e8>] __alloc_pages_nodemask+0x268/0x410
 [<ffffffff8109a43c>] ? sched_clock_local+0x1c/0x90
 [<ffffffff8109a6d1>] ? local_clock+0x21/0x40
 [<ffffffff810b9eb0>] ? __lock_release+0x420/0x510
 [<ffffffff810b534c>] ? __lock_acquired+0x16c/0x3c0
 [<ffffffff811ca265>] alloc_pages_current+0xc5/0x210
 [<ffffffffa0577105>] ? rbio_is_full+0x55/0x70 [btrfs]
 [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0
 [<ffffffff81666d50>] ? _raw_spin_unlock_irqrestore+0x40/0x60
 [<ffffffffa0578c0a>] full_stripe_write+0x5a/0xc0 [btrfs]
 [<ffffffffa0578ca9>] __raid56_parity_write+0x39/0x60 [btrfs]
 [<ffffffffa0578deb>] run_plug+0x11b/0x140 [btrfs]
 [<ffffffffa0578e33>] btrfs_raid_unplug+0x23/0x70 [btrfs]
 [<ffffffff812d36c2>] blk_flush_plug_list+0x82/0x1f0
 [<ffffffff812e0349>] blk_sq_make_request+0x1f9/0x740
 [<ffffffff812ceba2>] ? generic_make_request_checks+0x222/0x7c0
 [<ffffffff812cf264>] ? blk_queue_enter+0x124/0x310
 [<ffffffff812cf1d2>] ? blk_queue_enter+0x92/0x310
 [<ffffffff812d0ae2>] generic_make_request+0x172/0x2c0
 [<ffffffff812d0ad4>] ? generic_make_request+0x164/0x2c0
 [<ffffffff812d0ca0>] submit_bio+0x70/0x140
 [<ffffffffa0577b29>] ? rbio_add_io_page+0x99/0x150 [btrfs]
 [<ffffffffa0578a89>] finish_rmw+0x4d9/0x600 [btrfs]
 [<ffffffffa0578c4c>] full_stripe_write+0x9c/0xc0 [btrfs]
 [<ffffffffa057ab7f>] raid56_parity_write+0xef/0x160 [btrfs]
 [<ffffffffa052bd83>] btrfs_map_bio+0xe3/0x2d0 [btrfs]
 [<ffffffffa04fbd6d>] btrfs_submit_bio_hook+0x8d/0x1d0 [btrfs]
 [<ffffffffa05173c4>] submit_one_bio+0x74/0xb0 [btrfs]
 [<ffffffffa0517f55>] submit_extent_page+0xe5/0x1c0 [btrfs]
 [<ffffffffa0519b18>] __extent_writepage_io+0x408/0x4c0 [btrfs]
 [<ffffffffa05179c0>] ? alloc_dummy_extent_buffer+0x140/0x140 [btrfs]
 [<ffffffffa051dc88>] __extent_writepage+0x218/0x3a0 [btrfs]
 [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0
 [<ffffffffa051e2c9>] extent_write_cache_pages.clone.0+0x2f9/0x400 [btrfs]
 [<ffffffffa051e422>] extent_writepages+0x52/0x70 [btrfs]
 [<ffffffffa05001f0>] ? btrfs_set_inode_index+0x70/0x70 [btrfs]
 [<ffffffffa04fcc17>] btrfs_writepages+0x27/0x30 [btrfs]
 [<ffffffff81184df3>] do_writepages+0x23/0x40
 [<ffffffff81212229>] __writeback_single_inode+0x89/0x4d0
 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480
 [<ffffffff81212a60>] ? writeback_sb_inodes+0x260/0x480
 [<ffffffff8121295f>] ? writeback_sb_inodes+0x15f/0x480
 [<ffffffff81212ad2>] writeback_sb_inodes+0x2d2/0x480
 [<ffffffff810b1397>] ? down_read_trylock+0x57/0x60
 [<ffffffff811e6805>] ? trylock_super+0x25/0x60
 [<ffffffff810d629f>] ? rcu_read_lock_sched_held+0x4f/0x90
 [<ffffffff81212d0c>] __writeback_inodes_wb+0x8c/0xc0
 [<ffffffff812130b5>] wb_writeback+0x2b5/0x500
 [<ffffffff810b7ed8>] ? mark_held_locks+0x78/0xa0
 [<ffffffff810660a8>] ? __local_bh_enable_ip+0x68/0xc0
 [<ffffffff81213362>] ? wb_do_writeback+0x62/0x310
 [<ffffffff812133c1>] wb_do_writeback+0xc1/0x310
 [<ffffffff8107c3d9>] ? set_worker_desc+0x79/0x90
 [<ffffffff81213842>] wb_workfn+0x92/0x330
 [<ffffffff8107f133>] process_one_work+0x223/0x730
 [<ffffffff8107f083>] ? process_one_work+0x173/0x730
 [<ffffffff8108035f>] ? worker_thread+0x18f/0x430
 [<ffffffff810802ed>] worker_thread+0x11d/0x430
 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0
 [<ffffffff810801d0>] ? maybe_create_worker+0xf0/0xf0
 [<ffffffff810858df>] kthread+0xef/0x110
 [<ffffffff8108f74e>] ? schedule_tail+0x1e/0xd0
 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70
 [<ffffffff816673bf>] ret_from_fork+0x3f/0x70
 [<ffffffff810857f0>] ? __init_kthread_worker+0x70/0x70

The issue is that we've got the software context pinned while
calling blk_flush_plug_list(), which flushes callbacks that
are allowed to sleep. btrfs and raid has such callbacks.

Flip the checks around a bit, so we can enable preempt a bit
earlier and flush plugs without having preempt disabled.

This only affects blk-mq driven devices, and only those that
register a single queue.

Reported-by: Liu Bo <bo.li.liu@oracle.com>
Tested-by: Liu Bo <bo.li.liu@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20 20:29:45 -07:00
Kees Cook 02e2a5bfeb mac: validate mac_partition is within sector
If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single
512 byte sector would be read (secsize / 512). However the partition
structure would be located past the end of the buffer (secsize % 512).

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-20 08:49:28 -07:00
Dan Williams 2e6edc9538 block: protect rw_page against device teardown
Fix use after free crashes like the following:

 general protection fault: 0000 [#1] SMP
 Call Trace:
  [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem]
  [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem]
  [<ffffffff8128fd90>] bdev_read_page+0x50/0x60
  [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50
  [<ffffffff81297657>] mpage_readpages+0x107/0x170
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20
  [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310
  [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310
  [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0
  [<ffffffff811c76f6>] filemap_fault+0x396/0x530
  [<ffffffff811f816e>] __do_fault+0x4e/0xf0
  [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50

Cc: <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
[willy: symmetry fixups]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-19 13:47:10 -08:00
Jan Kara 1b2ff19e6a blk-flush: Queue through IO scheduler when flush not required
Currently blk_insert_flush() just adds flush request to q->queue_head
when flush is not required. That completely bypasses IO scheduler so
e.g. CFQ can be idling waiting for new request to arrive and will idle
through the whole window unnecessarily. Luckily this only happens in
rare cases as usually checks in generic_make_request_checks() clear
FLUSH and FUA flags early if they are not needed.

When no flushing is actually required, we can easily fix the problem by
properly queueing the request through the IO scheduler. Ideally IO
scheduler should be also made aware of requests queued via
blk_flush_queue_rq(). However inserting flush request through IO
scheduler can have unwanted side-effects since due to flush batching
delaying the flush request in IO scheduler will delay all flush requests
possibly coming from other processes. So we keep adding the request
directly to q->queue_head.

Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16 15:23:51 -07:00
Geliang Tang 4736346bb4 elevator: use list_{first,prev,next}_entry
To make the intention clearer, use list_{first,prev,next}_entry
instead of list_entry.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-16 15:21:48 -07:00
Randy Dunlap ccc2600b8a block: fix blk-core.c kernel-doc warning
Fix kernel-doc warning in blk-core.c:

Warning(..//block/blk-core.c:1549): No description found for parameter 'same_queue_rq'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-11 09:36:57 -07:00
Jens Axboe 1fa8cc52f4 blk-mq: mark __blk_mq_complete_request() static
It's no longer used outside of blk-mq core.

Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-11 09:36:56 -07:00
Linus Torvalds 3419b45039 Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-block
Pull block IO poll support from Jens Axboe:
 "Various groups have been doing experimentation around IO polling for
  (really) fast devices.  The code has been reviewed and has been
  sitting on the side for a few releases, but this is now good enough
  for coordinated benchmarking and further experimentation.

  Currently O_DIRECT sync read/write are supported.  A framework is in
  the works that allows scalable stats tracking so we can auto-tune
  this.  And we'll add libaio support as well soon.  Fow now, it's an
  opt-in feature for test purposes"

* 'for-4.4/io-poll' of git://git.kernel.dk/linux-block:
  direct-io: be sure to assign dio->bio_bdev for both paths
  directio: add block polling support
  NVMe: add blk polling support
  block: add block polling support
  blk-mq: return tag/queue combo in the make_request_fn handlers
  block: change ->make_request_fn() and users to return a queue cookie
2015-11-10 17:23:49 -08:00
Jens Axboe 05229beedd block: add block polling support
Add basic support for polling for specific IO to complete. This uses
the cookie that blk-mq passes back, which enables the block layer
to pass this cookie to the driver to spin for a specific request.

This will be combined with request latency tracking, so we can make
qualified decisions about when to poll and when not to. For now, for
benchmark purposes, we add a sysfs file that controls whether polling
is enabled or not.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07 10:40:47 -07:00
Jens Axboe 7b371636fb blk-mq: return tag/queue combo in the make_request_fn handlers
Return a cookie, blk_qc_t, from the blk-mq make request functions, that
allows a later caller to uniquely identify a specific IO. The cookie
doesn't mean anything to the caller, but the caller can use it to later
pass back to the block layer. The block layer can then identify the
hardware queue and request from that cookie.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07 10:40:47 -07:00
Jens Axboe dece16353e block: change ->make_request_fn() and users to return a queue cookie
No functional changes in this patch, but it prepares us for returning
a more useful cookie related to the IO that was queued up.

Signed-off-by: Jens Axboe <axboe@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07 10:40:46 -07:00
Ben Segall 8639b46139 pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
setpriority(PRIO_USER, 0, x) will change the priority of tasks outside of
the current pid namespace.  This is in contrast to both the other modes of
setpriority and the example of kill(-1).  Fix this.  getpriority and
ioprio have the same failure mode, fix them too.

Eric said:

: After some more thinking about it this patch sounds justifiable.
:
: My goal with namespaces is not to build perfect isolation mechanisms
: as that can get into ill defined territory, but to build well defined
: mechanisms.  And to handle the corner cases so you can use only
: a single namespace with well defined results.
:
: In this case you have found the two interfaces I am aware of that
: identify processes by uid instead of by pid.  Which quite frankly is
: weird.  Unfortunately the weird unexpected cases are hard to handle
: in the usual way.
:
: I was hoping for a little more information.  Changes like this one we
: have to be careful of because someone might be depending on the current
: behavior.  I don't think they are and I do think this make sense as part
: of the pid namespace.

Signed-off-by: Ben Segall <bsegall@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ambrose Feinstein <ambrose@google.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Mel Gorman 71baba4b92 mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM
__GFP_WAIT was used to signal that the caller was in atomic context and
could not sleep.  Now it is possible to distinguish between true atomic
context and callers that are not willing to sleep.  The latter should
clear __GFP_DIRECT_RECLAIM so kswapd will still wake.  As clearing
__GFP_WAIT behaves differently, there is a risk that people will clear the
wrong flags.  This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly
indicate what it does -- setting it allows all reclaim activity, clearing
them prevents it.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Mel Gorman d0164adc89 mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Linus Torvalds 69234acee5 Merge branch 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "The cgroup core saw several significant updates this cycle:

   - percpu_rwsem for threadgroup locking is reinstated.  This was
     temporarily dropped due to down_write latency issues.  Oleg's
     rework of percpu_rwsem which is scheduled to be merged in this
     merge window resolves the issue.

   - On the v2 hierarchy, when controllers are enabled and disabled, all
     operations are atomic and can fail and revert cleanly.  This allows
     ->can_attach() failure which is necessary for cpu RT slices.

   - Tasks now stay associated with the original cgroups after exit
     until released.  This allows tracking resources held by zombies
     (e.g.  pids) and makes it easy to find out where zombies came from
     on the v2 hierarchy.  The pids controller was broken before these
     changes as zombies escaped the limits; unfortunately, updating this
     behavior required too many invasive changes and I don't think it's
     a good idea to backport them, so the pids controller on 4.3, the
     first version which included the pids controller, will stay broken
     at least until I'm sure about the cgroup core changes.

   - Optimization of a couple common tests using static_key"

* 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (38 commits)
  cgroup: fix race condition around termination check in css_task_iter_next()
  blkcg: don't create "io.stat" on the root cgroup
  cgroup: drop cgroup__DEVEL__legacy_files_on_dfl
  cgroup: replace error handling in cgroup_init() with WARN_ON()s
  cgroup: add cgroup_subsys->free() method and use it to fix pids controller
  cgroup: keep zombies associated with their original cgroups
  cgroup: make css_set_rwsem a spinlock and rename it to css_set_lock
  cgroup: don't hold css_set_rwsem across css task iteration
  cgroup: reorganize css_task_iter functions
  cgroup: factor out css_set_move_task()
  cgroup: keep css_set and task lists in chronological order
  cgroup: make cgroup_destroy_locked() test cgroup_is_populated()
  cgroup: make css_sets pin the associated cgroups
  cgroup: relocate cgroup_[try]get/put()
  cgroup: move check_for_release() invocation
  cgroup: replace cgroup_has_tasks() with cgroup_is_populated()
  cgroup: make cgroup->nr_populated count the number of populated css_sets
  cgroup: remove an unused parameter from cgroup_task_migrate()
  cgroup: fix too early usage of static_branch_disable()
  cgroup: make cgroup_update_dfl_csses() migrate all target processes atomically
  ...
2015-11-05 14:51:32 -08:00
Linus Torvalds ccf21b69a8 Merge branch 'for-4.4/reservations' of git://git.kernel.dk/linux-block
Pull block reservation support from Jens Axboe:
 "This adds support for persistent reservations, both at the core level,
  as well as for sd and NVMe"

[ Background from the docs: "Persistent Reservations allow restricting
  access to block devices to specific initiators in a shared storage
  setup.  All implementations are expected to ensure the reservations
  survive a power loss and cover all connections in a multi path
  environment" ]

* 'for-4.4/reservations' of git://git.kernel.dk/linux-block:
  NVMe: Precedence error in nvme_pr_clear()
  nvme: add missing endianess annotations in nvme_pr_command
  NVMe: Add persistent reservation ops
  sd: implement the Persistent Reservation API
  block: add an API for Persistent Reservations
  block: cleanup blkdev_ioctl
2015-11-04 21:01:27 -08:00
Linus Torvalds 527d1529e3 Merge branch 'for-4.4/integrity' of git://git.kernel.dk/linux-block
Pull block integrity updates from Jens Axboe:
 ""This is the joint work of Dan and Martin, cleaning up and improving
  the support for block data integrity"

* 'for-4.4/integrity' of git://git.kernel.dk/linux-block:
  block, libnvdimm, nvme: provide a built-in blk_integrity nop profile
  block: blk_flush_integrity() for bio-based drivers
  block: move blk_integrity to request_queue
  block: generic request_queue reference counting
  nvme: suspend i/o during runtime blk_integrity_unregister
  md: suspend i/o during runtime blk_integrity_unregister
  md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown
  block: Inline blk_integrity in struct gendisk
  block: Export integrity data interval size in sysfs
  block: Reduce the size of struct blk_integrity
  block: Consolidate static integrity profile properties
  block: Move integrity kobject to struct gendisk
2015-11-04 20:51:48 -08:00
Linus Torvalds d9734e0d1c Merge branch 'for-4.4/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
 "This is the core block pull request for 4.4.  I've got a few more
  topic branches this time around, some of them will layer on top of the
  core+drivers changes and will come in a separate round.  So not a huge
  chunk of changes in this round.

  This pull request contains:

   - Enable blk-mq page allocation tracking with kmemleak, from Catalin.

   - Unused prototype removal in blk-mq from Christoph.

   - Cleanup of the q->blk_trace exchange, using cmpxchg instead of two
     xchg()'s, from Davidlohr.

   - A plug flush fix from Jeff.

   - Also from Jeff, a fix that means we don't have to update shared tag
     sets at init time unless we do a state change.  This cuts down boot
     times on thousands of devices a lot with scsi/blk-mq.

   - blk-mq waitqueue barrier fix from Kosuke.

   - Various fixes from Ming:

        - Fixes for segment merging and splitting, and checks, for
          the old core and blk-mq.

        - Potential blk-mq speedup by marking ctx pending at the end
          of a plug insertion batch in blk-mq.

        - direct-io no page dirty on kernel direct reads.

   - A WRITE_SYNC fix for mpage from Roman"

* 'for-4.4/core' of git://git.kernel.dk/linux-block:
  blk-mq: avoid excessive boot delays with large lun counts
  blktrace: re-write setting q->blk_trace
  blk-mq: mark ctx as pending at batch in flush plug path
  blk-mq: fix for trace_block_plug()
  block: check bio_mergeable() early before merging
  blk-mq: check bio_mergeable() early before merging
  block: avoid to merge splitted bio
  block: setup bi_phys_segments after splitting
  block: fix plug list flushing for nomerge queues
  blk-mq: remove unused blk_mq_clone_flush_request prototype
  blk-mq: fix waitqueue_active without memory barrier in block/blk-mq-tag.c
  fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read
  fs/mpage.c: forgotten WRITE_SYNC in case of data integrity write
  block: kmemleak: Track the page allocations for struct request
2015-11-04 20:28:10 -08:00
Jeff Moyer 2404e607a9 blk-mq: avoid excessive boot delays with large lun counts
Hi,

Zhangqing Luo reported long boot times on a system with thousands of
LUNs when scsi-mq was enabled.  He narrowed the problem down to
blk_mq_add_queue_tag_set, where every queue is frozen in order to set
the BLK_MQ_F_TAG_SHARED flag.  Each added device will freeze all queues
added before it in sequence, which involves waiting for an RCU grace
period for each one.  We don't need to do this.  After the second queue
is added, only new queues need to be initialized with the shared tag.
We can do that by percolating the flag up to the blk_mq_tag_set, and
updating the newly added queue's hctxs if the flag is set.

This problem was introduced by commit 0d2602ca30 (blk-mq: improve
support for shared tags maps).

Reported-and-tested-by: Jason Luo <zhangqing.luo@oracle.com>
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-03 08:42:19 -07:00
Ming Lin a22c4d7e34 block: re-add discard_granularity and alignment checks
In commit b49a087("block: remove split code in
blkdev_issue_{discard,write_same}"), discard_granularity and alignment
checks were removed. Ideally, with bio late splitting, the upper layers
shouldn't need to depend on device's limits.

Christoph reported a discard regression on the HGST Ultrastar SN100 NVMe
device when mkfs.xfs. We have not found the root cause yet.

This patch re-adds discard_granularity and alignment checks by reverting
the related changes in commit b49a087. The good thing is now we can
remove the 2G discard size cap and just use UINT_MAX to avoid bi_size
overflow.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-28 09:12:58 +09:00
Tejun Heo ca0752c5e3 blkcg: don't create "io.stat" on the root cgroup
The stat files on the root cgroup shows stats for the whole system and
usually don't contain any information which isn't available through
the usual system monitoring mechanisms.  Some controllers skip
collecting these duplicate stats to optimize cases where cgroup isn't
used and later try to emulate the result on demand.

This leads to complexities and subtle differences in the information
shown through different channels.  This is entirely unnecessary and
cgroup v2 is dropping stat files which are duplicate from all
controllers.  This patch removes "io.stat" from the root hierarchy.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Vivek Goyal <vgoyal@redhat.com>
2015-10-22 17:58:26 +09:00
Ming Lei cfd0c552a8 blk-mq: mark ctx as pending at batch in flush plug path
Most of times, flush plug should be the hottest I/O path,
so mark ctx as pending after all requests in the list are
inserted.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 15:00:58 -06:00
Ming Lei 676d06077f blk-mq: fix for trace_block_plug()
The trace point is for tracing plug event of each request
queue instead of each task, so we should check the request
count in the plug list from current queue instead of
current task.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 15:00:56 -06:00
Ming Lei 7460d389c0 block: check bio_mergeable() early before merging
After bio splitting is introduced, one bio can be splitted
and it is marked as NOMERGE because it is too fat to be merged,
so check bio_mergeable() earlier to avoid to try to merge it
unnecessarily.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 15:00:54 -06:00
Ming Lei e18378a60e blk-mq: check bio_mergeable() early before merging
It isn't necessary to try to merge the bio which is marked
as NOMERGE.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 15:00:53 -06:00
Ming Lei 6ac45aeb6b block: avoid to merge splitted bio
The splitted bio has been already too fat to merge, so mark it
as NOMERGE.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 15:00:51 -06:00
Ming Lei bdced438ac block: setup bi_phys_segments after splitting
The number of bio->bi_phys_segments is always obtained
during bio splitting, so it is natural to setup it
just after bio splitting, then we can avoid to compute
nr_segment again during merge.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 15:00:50 -06:00
Jeff Moyer 0809e3ac62 block: fix plug list flushing for nomerge queues
Request queues with merging disabled will not flush the plug list after
BLK_MAX_REQUEST_COUNT requests have been queued, since the code relies
on blk_attempt_plug_merge to compute the request_count.  Fix this by
computing the number of queued requests even for nomerge queues.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 15:00:48 -06:00
Christoph Hellwig bbd3e06436 block: add an API for Persistent Reservations
This commits adds a driver API and ioctls for controlling Persistent
Reservations s/genericly/generically/ at the block layer.  Persistent
Reservations are supported by SCSI and NVMe and allow controlling who gets
access to a device in a shared storage setup.

Note that we add a pr_ops structure to struct block_device_operations
instead of adding the members directly to avoid bloating all instances
of devices that will never support Persistent Reservations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:46:56 -06:00
Christoph Hellwig d8e4bb8103 block: cleanup blkdev_ioctl
Split out helpers for all non-trivial ioctls to make this function simpler,
and also start passing around a pointer version of the argument, as that's
what most ioctl handlers actually need.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:46:55 -06:00
Dan Williams 4125a09b0a block, libnvdimm, nvme: provide a built-in blk_integrity nop profile
The libnvidmm-btt and nvme drivers use blk_integrity to reserve space
for per-sector metadata, but sometimes without protection checksums.
This property is generically useful, so teach the block core to
internally specify a nop profile if one is not provided at registration
time.

Cc: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
[hch: kill the local nvme nop profile as well]
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:43:45 -06:00
Dan Williams 5a48fc147d block: blk_flush_integrity() for bio-based drivers
Since they lack requests to pin the request_queue active, synchronous
bio-based drivers may have in-flight integrity work from
bio_integrity_endio() that is not flushed by blk_freeze_queue().  Flush
that work to prevent races to free the queue and the final usage of the
blk_integrity profile.

This is temporary unless/until bio-based drivers start to generically
take a q_usage_counter reference while a bio is in-flight.

Cc: Martin K. Petersen <martin.petersen@oracle.com>
[martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case]
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:43:44 -06:00
Dan Williams ac6fc48c9f block: move blk_integrity to request_queue
A trace like the following proceeds a crash in bio_integrity_process()
when it goes to use an already freed blk_integrity profile.

 BUG: unable to handle kernel paging request at ffff8800d31b10d8
 IP: [<ffff8800d31b10d8>] 0xffff8800d31b10d8
 PGD 2f65067 PUD 21fffd067 PMD 80000000d30001e3
 Oops: 0011 [#1] SMP
 Dumping ftrace buffer:
 ---------------------------------
    ndctl-2222    2.... 44526245us : disk_release: pmem1s
 systemd--2223    4.... 44573945us : bio_integrity_endio: pmem1s
    <...>-409     4.... 44574005us : bio_integrity_process: pmem1s
 ---------------------------------
[..]
  Call Trace:
  [<ffffffff8144e0f9>] ? bio_integrity_process+0x159/0x2d0
  [<ffffffff8144e4f6>] bio_integrity_verify_fn+0x36/0x60
  [<ffffffff810bd2dc>] process_one_work+0x1cc/0x4e0

Given that a request_queue is pinned while i/o is in flight and that a
gendisk is allowed to have a shorter lifetime, move blk_integrity to
request_queue to satisfy requests arriving after the gendisk has been
torn down.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
[martin: fix the CONFIG_BLK_DEV_INTEGRITY=n case]
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:43:42 -06:00
Dan Williams 3ef28e83ab block: generic request_queue reference counting
Allow pmem, and other synchronous/bio-based block drivers, to fallback
on a per-cpu reference count managed by the core for tracking queue
live/dead state.

The existing per-cpu reference count for the blk_mq case is promoted to
be used in all block i/o scenarios.  This involves initializing it by
default, waiting for it to drop to zero at exit, and holding a live
reference over the invocation of q->make_request_fn() in
generic_make_request().  The blk_mq code continues to take its own
reference per blk_mq request and retains the ability to freeze the
queue, but the check that the queue is frozen is moved to
generic_make_request().

This fixes crash signatures like the following:

 BUG: unable to handle kernel paging request at ffff880140000000
 [..]
 Call Trace:
  [<ffffffff8145e8bf>] ? copy_user_handle_tail+0x5f/0x70
  [<ffffffffa004e1e0>] pmem_do_bvec.isra.11+0x70/0xf0 [nd_pmem]
  [<ffffffffa004e331>] pmem_make_request+0xd1/0x200 [nd_pmem]
  [<ffffffff811c3162>] ? mempool_alloc+0x72/0x1a0
  [<ffffffff8141f8b6>] generic_make_request+0xd6/0x110
  [<ffffffff8141f966>] submit_bio+0x76/0x170
  [<ffffffff81286dff>] submit_bh_wbc+0x12f/0x160
  [<ffffffff81286e62>] submit_bh+0x12/0x20
  [<ffffffff813395bd>] jbd2_write_superblock+0x8d/0x170
  [<ffffffff8133974d>] jbd2_mark_journal_empty+0x5d/0x90
  [<ffffffff813399cb>] jbd2_journal_destroy+0x24b/0x270
  [<ffffffff810bc4ca>] ? put_pwq_unlocked+0x2a/0x30
  [<ffffffff810bc6f5>] ? destroy_workqueue+0x225/0x250
  [<ffffffff81303494>] ext4_put_super+0x64/0x360
  [<ffffffff8124ab1a>] generic_shutdown_super+0x6a/0xf0

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:43:41 -06:00
Martin K. Petersen 25520d55cd block: Inline blk_integrity in struct gendisk
Up until now the_integrity profile has been dynamically allocated and
attached to struct gendisk after the disk has been made active.

This causes problems because NVMe devices need to register the profile
prior to the partition table being read due to a mandatory metadata
buffer requirement. In addition, DM goes through hoops to deal with
preallocating, but not initializing integrity profiles.

Since the integrity profile is small (4 bytes + a pointer), Christoph
suggested moving it to struct gendisk proper. This requires several
changes:

 - Moving the blk_integrity definition to genhd.h.

 - Inlining blk_integrity in struct gendisk.

 - Removing the dynamic allocation code.

 - Adding helper functions which allow gendisk to set up and tear down
   the integrity sysfs dir when a disk is added/deleted.

 - Adding a blk_integrity_revalidate() callback for updating the stable
   pages bdi setting.

 - The calls that depend on whether a device has an integrity profile or
   not now key off of the bi->profile pointer.

 - Simplifying the integrity support routines in DM (Mike Snitzer).

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:42 -06:00
Martin K. Petersen 4c241d08db block: Export integrity data interval size in sysfs
The size of the data interval was not exported in the sysfs integrity
directory. Export it so that userland apps can tell whether the interval
is different from the device's logical block size.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:41 -06:00
Martin K. Petersen a48f041d91 block: Reduce the size of struct blk_integrity
The per-device properties in the blk_integrity structure were previously
unsigned short. However, most of the values fit inside a char. The only
exception is the data interval size and we can work around that by
storing it as a power of two.

This cuts the size of the dynamic portion of blk_integrity in half.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:39 -06:00
Martin K. Petersen 0f8087ecde block: Consolidate static integrity profile properties
We previously made a complete copy of a device's data integrity profile
even though several of the fields inside the blk_integrity struct are
pointers to fixed template entries in t10-pi.c.

Split the static and per-device portions so that we can reference the
template directly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:38 -06:00
Martin K. Petersen aff34e192e block: Move integrity kobject to struct gendisk
The integrity kobject purely exists to support the integrity
subdirectory in sysfs and doesn't really have anything to do with the
blk_integrity data structure. Move the kobject to struct gendisk where
it belongs.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-21 14:42:36 -06:00
Tejun Heo b02176f30c block: don't release bdi while request_queue has live references
bdi's are initialized in two steps, bdi_init() and bdi_register(), but
destroyed in a single step by bdi_destroy() which, for a bdi embedded
in a request_queue, is called during blk_cleanup_queue() which makes
the queue invisible and starts the draining of remaining usages.

A request_queue's user can access the congestion state of the embedded
bdi as long as it holds a reference to the queue.  As such, it may
access the congested state of a queue which finished
blk_cleanup_queue() but hasn't reached blk_release_queue() yet.
Because the congested state was embedded in backing_dev_info which in
turn is embedded in request_queue, accessing the congested state after
bdi_destroy() was called was fine.  The bdi was destroyed but the
memory region for the congested state remained accessible till the
queue got released.

a13f35e871 ("writeback: don't embed root bdi_writeback_congested in
bdi_writeback") changed the situation.  Now, the root congested state
which is expected to be pinned while request_queue remains accessible
is separately reference counted and the base ref is put during
bdi_destroy().  This means that the root congested state may go away
prematurely while the queue is between bdi_dstroy() and
blk_cleanup_queue(), which was detected by Andrey's KASAN tests.

The root cause of this problem is that bdi doesn't distinguish the two
steps of destruction, unregistration and release, and now the root
congested state actually requires a separate release step.  To fix the
issue, this patch separates out bdi_unregister() and bdi_exit() from
bdi_destroy().  bdi_unregister() is called from blk_cleanup_queue()
and bdi_exit() from blk_release_queue().  bdi_destroy() is now just a
simple wrapper calling the two steps back-to-back.

While at it, the prototype of bdi_destroy() is moved right below
bdi_setup_and_register() so that the counterpart operations are
located together.

Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: a13f35e871 ("writeback: don't embed root bdi_writeback_congested in bdi_writeback")
Cc: stable@vger.kernel.org # v4.2+
Reported-and-tested-by: Andrey Konovalov <andreyknvl@google.com>
Link: http://lkml.kernel.org/g/CAAeHK+zUJ74Zn17=rOyxacHU18SgCfC6bsYW=6kCY5GXJBwGfQ@mail.gmail.com
Reviewed-by: Jan Kara <jack@suse.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-15 09:53:28 -06:00
Junichi Nomura f42d79ab67 blk-mq: fix use-after-free in blk_mq_free_tag_set()
tags is freed in blk_mq_free_rq_map() and should not be used after that.
The problem doesn't manifest if CONFIG_CPUMASK_OFFSTACK is false because
free_cpumask_var() is nop.

tags->cpumask is allocated in blk_mq_init_tags() so it's natural to
free cpumask in its counter part, blk_mq_free_tags().

Fixes: f26cdc8536 ("blk-mq: Shared tag enhancements")
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Keith Busch <keith.busch@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-15 08:45:58 -06:00