Commit Graph

1700 Commits

Author SHA1 Message Date
Roland Dreier 4c0283fc56 IB/core: Remove IB_DEVICE_SEND_W_INV capability flag
In 2.6.26, we added some support for send with invalidate work
requests, including a device capability flag to indicate whether a
device supports such requests.  However, the support was incomplete:
the completion structure was not extended with a field for the key
contained in incoming send with invalidate requests.

Full support for memory management extensions (send with invalidate,
local invalidate, fast register through a send queue, etc) is planned
for 2.6.27.  Since send with invalidate is not very useful by itself,
just remove the IB_DEVICE_SEND_W_INV bit before the 2.6.26 final
release; we will add an IB_DEVICE_MEM_MGT_EXTENSIONS bit in 2.6.27,
which makes things simpler for applications, since they will not have
quite as confusing an array of fine-grained bits to check.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-06-09 09:58:42 -07:00
Roland Dreier 8079ffa0e1 IB/umem: Avoid sign problems when demoting npages to integer
On a 64-bit architecture, if ib_umem_get() is called with a size value
that is so big that npages is negative when cast to int, then the
length of the page list passed to get_user_pages(), namely

	min_t(int, npages, PAGE_SIZE / sizeof (struct page *))

will be negative, and get_user_pages() will immediately return 0 (at
least since 900cf086, "Be more robust about bad arguments in
get_user_pages()").  This leads to an infinite loop in ib_umem_get(),
since the code boils down to:

	while (npages) {
		ret = get_user_pages(...);
		npages -= ret;
	}

Fix this by taking the minimum as unsigned longs, so that the value of
npages is never truncated.

The impact of this bug isn't too severe, since the value of npages is
checked against RLIMIT_MEMLOCK, so a process would need to have an
astronomical limit or have CAP_IPC_LOCK to be able to trigger this,
and such a process could already cause lots of mischief.  But it does
let buggy userspace code cause a kernel lock-up; for example I hit
this with code that passes a negative value into a memory registartion
function where it is promoted to a huge u64 value.

Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-06-06 21:38:37 -07:00
Ralph Campbell 27676a3e16 IB/ipath: Fix SM trap forwarding
SM/SMA traps received by the ipath driver should be forwarded to the
SM if it is running on the host.  The ib_ipath driver was incorrectly
replying with "bad method."

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-06-06 11:23:29 -07:00
Joachim Fenkes 088af1543c IB/ehca: Reject send WRs only for RESET, INIT and RTR state
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-06-06 11:21:33 -07:00
Ralph Campbell 03031f71c7 IB/ipath: Fix device capability flags
The driver supports a few features (RNR NAK, port active event, SRQ
resize) that were not reported in the device capability flags.  This
patch fixes that.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-26 15:22:17 -07:00
Roland Dreier e8ffef73c8 IB/ipath: Avoid test_bit() on u64 SDMA status value
Gabriel C <nix.or.die@googlemail.com> pointed out that when the x86
bitops are updated to operate on unsigned long, the code in
sdma_abort_task() will produce warnings:

    drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task':
    drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type

and so on, because it uses test_bit() to operation on a u64 value
(returned by ipath_read_kref64() for a hardware register).

Fix up these warnings by converting the test_bit() operations to &ing
with appropriate symbolic defines of the bits within the hardware
register.  This has the benign side-effect of making the code more
self-documenting as well.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-26 15:20:34 -07:00
Linus Torvalds c2448278e3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mad: Fix kernel crash when .process_mad() returns SUCCESS|CONSUMED
  IPoIB: Test for NULL broadcast object in ipiob_mcast_join_finish()
  MAINTAINERS: Add cxgb3 and iw_cxgb3 NIC and iWARP driver entries
  IB/mlx4: Fix creation of kernel QP with max number of send s/g entries
  IB/mthca: Fix max_sge value returned by query_device
  RDMA/cxgb3: Fix uninitialized variable warning in iwch_post_send()
  IB/mlx4: Fix uninitialized-var warning in mlx4_ib_post_send()
  IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediate
  IB/ipath: Fix printk format for ipath_sdma_status
2008-05-23 11:11:44 -07:00
Dave Olson 5a4f2b6752 IB/mad: Fix kernel crash when .process_mad() returns SUCCESS|CONSUMED
If a low-level driver returns IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED,
handle_outgoing_dr_smp() doesn't clean up properly.  The fix is to
kfree the local data and break, rather than falling through.  This was
observed with the ipath driver, but could happen with any driver.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1027>.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-23 10:52:59 -07:00
Jack Morgenstein e1d50dce5a IPoIB: Test for NULL broadcast object in ipiob_mcast_join_finish()
We saw a kernel oops in our regression testing when a multicast "join
finish" occurred just after the interface was -- this is
<https://bugs.openfabrics.org/show_bug.cgi?id=1040>.  The test
randomly causes the HCA physical port to go down then up.

The cause of this is that ipoib_mcast_join_finish() processing happen
just after ipoib_mcast_dev_flush() was invoked (in which case the
broadcast pointer is NULL).  This patch tests for and handles the case
where priv->broadcast is NULL.

Cc: <stable@kernel.org>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-20 15:41:09 -07:00
Roland Dreier cd155c1c7c IB/mlx4: Fix creation of kernel QP with max number of send s/g entries
When creating a kernel QP where the consumer asked for a send queue
with lots of scatter/gater entries, set_kernel_sq_size() incorrectly
returned an error if the send queue stride is larger than the
hardware's maximum send work request descriptor size.  This is not a
problem; the only issue is to make sure that the actual descriptors
used do not overflow the maximum descriptor size, so check this instead.

Clamp the returned max_send_sge value to be no bigger than what
query_device returns for the max_sge to avoid confusing hapless users,
even if the hardware is capable of handling a few more s/g entries.

This bug caused NFS/RDMA mounts to fail when the server adapter used
the mlx4 driver.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-20 14:00:02 -07:00
Greg Kroah-Hartman 6c06aec248 IB: fix race in device_create
There is a race from when a device is created with device_create() and
then the drvdata is set with a call to dev_set_drvdata() in which a
sysfs file could be open, yet the drvdata will be NULL, causing all
sorts of bad things to happen.

This patch fixes the problem by using the new function,
device_create_drvdata().

Cc: Kay Sievers <kay.sievers@vrfy.org>
Reviewed-by: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-20 13:31:55 -07:00
Roland Dreier 12103dca52 IB/mthca: Fix max_sge value returned by query_device
The mthca driver returns the maximum number of scatter/gather entries
returned by the firmware as the max_sge value when device properties
are queried.  However, the firmware also reports a limit on the
maximum descriptor size allowed, and because mthca takes into account
the worst case send request overhead when checking whether to allow a
QP to be created, the largest number of scatter/gather entries that
can be used with mthca may be limited by the maximum descriptor size
rather than just by the actual s/g entry limit.

This means that applications cannot actually create QPs with
max_send_sge equal to the limit returned by ib_query_device().  Fix
this by checking if the maximum descriptor size imposes a lower limit
and if so returning that lower limit.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-16 14:58:44 -07:00
Roland Dreier 21609ae3ef RDMA/cxgb3: Fix uninitialized variable warning in iwch_post_send()
drivers/infiniband/hw/cxgb3/iwch_qp.c: In function 'iwch_post_send':
    drivers/infiniband/hw/cxgb3/iwch_qp.c:232: warning: 't3_wr_flit_cnt' may be used uninitialized in this function

This is what akpm describes as "the dopey
gcc-doesn't-know-that-foo(&var)-writes-to-var problem."

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
2008-05-16 14:58:40 -07:00
Andrew Morton a3d8e1591d IB/mlx4: Fix uninitialized-var warning in mlx4_ib_post_send()
drivers/infiniband/hw/mlx4/qp.c: In function 'mlx4_ib_post_send':
    drivers/infiniband/hw/mlx4/qp.c:1460: warning: 'seglen' may be used uninitialized in this function

This is the dopey gcc-doesn't-know-that-foo(&var)-writes-to-var problem.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-16 14:28:30 -07:00
Ralph Campbell df3f0da8db IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediate
When I fixed the RC receive completion opcode in 2bfc8e9e ("IB/ipath:
Return the correct opcode for RDMA WRITE with immediate"), I forgot to
fix UC, which had the same problem for RDMA write with immediate
returning the wrong opcode.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-15 16:37:25 -07:00
Roland Dreier cd80ec6f81 IB/ipath: Fix printk format for ipath_sdma_status
Commit f018c7e1 ("IB/ipath: Change ipath_devdata.ipath_sdma_status to be
unsigned long") changed ipath_sdma_status to be unsigned long, but left
a few debug messages that printed it out with a %016llx format, which
generates the warnings

    drivers/infiniband/hw/ipath/ipath_sdma.c:348: warning: format '%016llx' expects type 'long long unsigned int', but argument  3 has type 'long unsigned int'
    drivers/infiniband/hw/ipath/ipath_sdma.c:618: warning: format '%016llx' expects type 'long long unsigned int', but argument  3 has type 'long unsigned int'

Fix this by changing the format used to print out the value to %08lx
(8 hex digits are now sufficient, because the highest bit used is 31).

Warnings reported by Randy Dunlap <randy.dunlap@oracle.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-15 15:28:55 -07:00
Steve Wise a58e58fafd RDMA/cxgb3: Wrap the software send queue pointer as needed on flush
cxio_flush_sq() was failing to wrap around the software send queue
causing garbage completion entries on a flush operation.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-13 11:52:55 -07:00
Roland Dreier f018c7e177 IB/ipath: Change ipath_devdata.ipath_sdma_status to be unsigned long
Andrew Morton <akpm@linux-foundation.org> pointed out that bitops
should take an unsigned long * arg.  However, the ipath driver was
doing bitops on struct ipath_devdata.ipath_sdma_status, which is u64.
Change this member to unsigned long to avoid tons of warnings when x86
fixes the bitops to take unsigned long * instead of void *.

Also, change the IPATH_SDMA_RUNNING and IPATH_SDMA_SHUTDOWN bit
numbers to 30 and 31 (instead of 62 and 63) so that we're not setting
another booby trap for someone who tries to make ipath work on a
32-bit architecture.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-13 11:51:23 -07:00
Pavel Emelyanov 40d97692fb IB/ipath: Make ipath_portdata work with struct pid * not pid_t
The official reason is "with the presence of pid namespaces in the
kernel using pid_t-s inside one is no longer safe."

But the reason I fix this right now is the following:

About a month ago (when 2.6.25 was not yet released) there still was a
one last caller of a to-be-deprecated-soon function find_pid() - the
kill_proc() function, which in turn was only used by nfs callback
code.

During the last merge window, this last caller was finally eliminated
by some NFS patch(es) and I was about to finally kill this kill_proc()
and find_pid(), but found, that I was late and the kill_proc is now
called from the ipath driver since commit 58411d1c ("IB/ipath: Head of
Line blocking vs forward progress of user apps").

So here's a patch that fixes this code to use struct pid * and (!)
the kill_pid routine.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-13 11:45:32 -07:00
Ralph Campbell 74116f580b IB/ipath: Fix RDMA read response sequence checking
If an out of sequence RDMA read response middle or last packet is
received, we should only resend the RDMA read request on the first
out of sequence packet and drop subsequent out of sequence packets
otherwise, we get "too many retries".

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-13 11:42:20 -07:00
Ralph Campbell e509be898d IB/ipath: Fix many locking issues when switching to error state
The send DMA hardware queue voided a number of prior assumptions about
when a send is complete which led to completions being generated out of
order.  There were also a number of locking issues when switching the QP
to the error or reset states, and we implement the IB_QPS_SQD state.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-13 11:41:29 -07:00
Ralph Campbell 53dc1ca194 IB/ipath: Fix RC and UC error handling
When errors are detected in RC, the QP should transition to the
IB_QPS_ERR state, not the IB_QPS_SQE state. Also, when the error is on
the responder side, the receive work completion error was incorrect
(remote vs. local).

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-13 11:40:25 -07:00
Roland Dreier dd37818dbd RDMA/nes: Fix up nes_lro_max_aggr module parameter
Fix some bugs with the max_aggr module parameter added with LRO support:

 - The module parameter value ignored and not actually used to set
   lro_mgr.max_aggr.
 - MODULE_PARM_DESC had a typo "_mro_" instead of "_lro_" so it didn't
   end up describing the actual module parameter.
 - The nes_lro_max_aggr variable was declared as unsigned, but the
   module_param line said "int" instead of "uint" for the type.
 - The default value for the parameter was stuck in the permissions
   field of module_param, which led to nonsensical permissions for the
   file under /sys/module/iw_nes/param.
 - The parameter was used in only one file but defined in another, which
   led to the variable being global for no good reason.  Move everything
   related to the parameter to the file nes_hw.c where it is actually
   used.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-13 11:27:25 -07:00
Stefan Roscher 12137c593d IB/ehca: Wait for async events to finish before destroying QP
This is necessary because, in a multicore environment, a race between
uverbs async handler and destroy QP could occur.

Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 11:35:06 -07:00
John Gregor ab69b3cf12 IB/ipath: Fix SDMA error recovery in absence of link status change
What's fixed:

    in ipath_cancel_sends()

        We need to unconditionally set ABORTING.  So, swap the tests
        so the set_bit() isn't shadowed by the &&.

        If we've disarmed the piobufs, then we need to unconditionally
        set DISARMED.  So, move it out from the overly protective if
        at the bottom.

    in sdma_abort_task()

        Abort_task was written knowing that the SDMA engine would always
        be reset (and restarted) on error.  A recent change broke that
        fundamental assumption by taking the restart portion and making
        it conditional on a link status change.  But, SDMA can go boom
        without a link status change in some conditions.

Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 11:01:10 -07:00
Dave Olson e2ab41cae4 IB/ipath: Need to always request and handle PIO avail interrupts
Now that we always use PIO for vl15 on 7220, we could get stuck forever
if we happened to run out of PIO buffers from the verbs code, because
the setup code wouldn't run; the interrupt was also ignored if SDMA was
supported.  We also have to reduce the pio update threshold if we have
fewer kernel buffers than the existing threshold.

Clean up the initialization a bit to get ordering safer and more
sensible, and use the existing ipath_chg_kernavail call to do init,
rather than doing it separately.

Drop unnecessary clearing of pio buffer on pio parity error.

Drop incorrect updating of pioavailshadow when exitting freeze mode
(software state may not match chip state if buffer has been allocated
and not yet written).

If we couldn't get a kernel buffer for a while, make sure we are
in sync with hardware, mainly to handle the exitting freeze case.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 11:00:15 -07:00
Michael Albaugh 2889d1ef12 IB/ipath: Fix count of packets received by kernel
The loop in ipath_kreceive() that processes packets increments the
loop-index 'i' once too often, because the exit condition does not
depend on it, and is checked after the increment. By adding a check for
!last to the iterator in the for loop, we correct that in a way that is
not so likely to be re-broken by changes in the loop body.

Signed-off-by: Michael Albaugh <micheal.albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 10:59:23 -07:00
Ralph Campbell 2bfc8e9edf IB/ipath: Return the correct opcode for RDMA WRITE with immediate
This patch fixes a bug in the RC responder which generates a completion
entry with the wrong opcode when an RDMA WRITE with immediate is received.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 10:58:50 -07:00
Dave Olson b4d390d8d2 IB/ipath: Fix bug that can leave sends disabled after freeze recovery
The semantics of cancel_sends changed, but the code using it was missed.
Don't leave sends and pioavail updates disabled, and add a comment as to
why the force update is needed.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 10:57:48 -07:00
Ralph Campbell 6e87d15007 IB/ipath: Only increment SSN if WQE is put on send queue
If a send work request has immediate errors and is not put on the
send queue, we shouldn't update any of the QP state.

The increment of the SSN wasn't obeying this.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 10:57:14 -07:00
Michael Albaugh 5f51efc195 IB/ipath: Only warn about prototype chip during init
We warn about prototype chips, but the function that checks for
support is also called as a result of a get_portinfo request, which
can clutter the logs.

Restrict warning to only appear during initialization.

Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-07 10:56:47 -07:00
Roland Dreier 273748cc90 RDMA/cxgb3: Fix severe limit on userspace memory registration size
Currently, iw_cxgb3 is severely limited on the amount of userspace
memory that can be registered in in a single memory region, which
causes big problems for applications that expect to be able to
register 100s of MB.

The problem is that the driver uses a single kmalloc()ed buffer to
hold the physical buffer list (PBL) for the entire memory region
during registration, which means that 8 bytes of contiguous memory are
required for each page of memory being registered.  For example, a 64
MB registration will require 128 KB of contiguous memory with 4 KB
pages, and it unlikely that such an allocation will succeed on a busy
system.

This is purely a driver problem: the temporary page list buffer is not
needed by the hardware, so we can fix this by writing the PBL to the
hardware in page-sized chunks rather than all at once.  We do this by
splitting the memory registration operation up into several steps:

 - Allocate PBL space in adapter memory for the full registration
 - Copy PBL to adapter memory in chunks
 - Allocate STag and enable memory region

This also allows several other cleanups to the __cxio_tpt_op()
interface and related parts of the driver.

This change leaves the reregister memory region and memory window
operations broken, but they already didn't work due to other
longstanding bugs, so fixing them will be left to a later patch.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-06 15:56:22 -07:00
Roland Dreier 0e9913362a RDMA/cxgb3: Don't add PBL memory to gen_pool in chunks
Current iw_cxgb3 code adds PBL memory to the driver's gen_pool in 2 MB
chunks.  This limits the largest single allocation that can be done to
the same size, which means that with 4 KB pages, each of which takes 8
bytes of PBL memory, the largest memory region that can be allocated
is 1 GB (256K PBL entries * 4 KB/entry).

Remove this limit by adding all the PBL memory in a single gen_pool
chunk, if possible.  Add code that falls back to smaller chunks if
gen_pool_add() fails, which can happen if there is not sufficient
contiguous lowmem for the internal gen_pool bitmap.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-06 15:03:38 -07:00
Stefan Roscher cf04690885 IB/ehca: Fix function return types
Also remove duplicate assignment of local_ca_ack_delay and change
min_t check for local_ca_ack_delay to u8 instead of int.

Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-05 15:51:49 -07:00
Steve Wise 77a8d5741f RDMA/cxgb3: Bump up the MPA connection setup timeout.
Testing on large clusters shows its way too short at 10 secs.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02 10:57:09 -07:00
Steve Wise c4d49776e8 RDMA/cxgb3: Silently ignore close reply after abort.
Remove bad BUG_ON() that can trigger in correct operation from
close_con_rpl().  It is possible to get a close_rpl message on a dead
connection.  The sequence is:

	- host refs ep for close exchange
	- host posts close_req
	- hw posts PEER_ABORT from incoming RST
	- host marks ep DEAD
	- host posts ABORT_RPL and releases ep resources
	- hw posts CLOSE_RPL
	- host derefs ep and ep freed.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02 10:57:09 -07:00
Steve Wise c8286944b8 RDMA/cxgb3: QP flush fixes
- Flush the QP only after the HW disables the connection.  Currently
  we flush the QP when transitioning to CLOSING.  This exposes a race
  condition where the HW can complete a RECV WR, for instance, -and-
  the SW can flush that same WR.

- Only call CQ event handlers on flush IFF we actually flushed something.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-02 10:56:57 -07:00
Eli Cohen 57ce41d1d1 IB/ipoib: Fix transmit queue stalling forever
Commit f56bcd80 ("IPoIB: Use separate CQ for UD send completions")
introduced a bug where the transmit queue could get stopped and never
woken up.  The problem is that send completions are only polled at the
end of the xmit function, so if the send queue fills up and the xmit
path stops the queue, then there is no way for send completions to
ever get polled, and so the transmit queue stays stopped forever.

Fix this by arming the send CQ just before posting the last send
request that fills the send queue.  Then, when the completion event
handler is called, drain the send CQ.  Since it is possible that not
enough send completions are in the CQ, verify that the the net queue
has been woken up after draining the send CQ, and if not arm a timer
and drain again at the timer function.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30 20:02:45 -07:00
Roland Dreier 3ae15e1623 IB/mlx4: Fix off-by-one errors in calls to mlx4_ib_free_cq_buf()
When I merged bbf8eed1 ("IB/mlx4: Add support for resizing CQs") I
changed things around so that mlx4_ib_alloc_cq_buf() and
mlx4_ib_free_cq_buf() were used everywhere they could be.  However, I
screwed up the number of entries passed into mlx4_ib_alloc_cq_buf()
in a couple places -- the function bumps the number of entries
internally, so the caller shouldn't add 1 as well.

Passing a too-big value for the number of entries to mlx4_ib_free_cq_buf()
can cause the cleanup to go off the end of an array and corrupt
allocator state in interesting ways.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30 19:52:55 -07:00
Glenn Streiff 7495ab6837 RDMA/nes: Formatting cleanup
Various cleanups:
	- Change // to /* .. */
	- Place whitespace around binary operators.
	- Trim down a few long lines.
	- Some minor alignment formatting for better readability.
	- Remove some silly tabs.

Signed-off-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:54 -07:00
Eric Schneider 0e1de5d62e RDMA/nes: Add support for SFP+ PHY
This patch enables the iw_nes module for NetEffect RNICs to support
additional PHYs including SFP+ (referred to as ARGUS in the code).

Signed-off-by: Eric Schneider <eric.schneider@neteffect.com>
Signed-off-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:54 -07:00
Faisal Latif 37dab4112d RDMA/nes: Use LRO
Signed-off-by: Faisal Latif <flatif@neteffect.com.
Signed-off-by: Glenn Streiff <gstreiff@neteffect.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:54 -07:00
Eli Cohen b4132efa1a IPoIB: Copy child MTU from parent
When creating a child interface, copy the MTU information from the
parent.  Otherwise when the child's multicast join completes, the MTU
will not be updated since the code does

	dev->mtu = min(priv->mcast_mtu, priv->admin_mtu);

and priv->admin_mtu will be set to 0.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Roland Dreier baaad380c0 IB/mthca: Avoid changing userspace ABI to handle DMA write barrier attribute
Commit cb9fbc5c ("IB: expand ib_umem_get() prototype") changed the
mthca userspace ABI to provide a way for userspace to indicate which
memory regions need the DMA write barrier attribute.  However, it is
possible to handle this without breaking existing userspace, by having
the mthca kernel driver recognize whether it is talking to old or new
userspace, depending on the size of the register MR structure passed in.

The only potential drawback of this is that is allows old userspace
(which has a bug with DMA ordering on large SGI Altix systems) to
continue to run on new kernels, but the advantage of allowing old
userspace to continue to work on unaffected systems seems to outweigh
this, and we can print a warning to push people to upgrade their
userspace.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Olaf Kirch 0bfe151cc4 IB/mthca: Avoid recycling old FMR R_Keys too soon
When a FMR is unmapped, mthca resets the map count to 0, and clears
the upper part of the R_Key which is used as the sequence counter.

This poses a problem for RDS, which uses ib_fmr_unmap as a fence
operation.  RDS assumes that after issuing an unmap, the old R_Keys
will be invalid for a "reasonable" period of time. For instance,
Oracle processes uses shared memory buffers allocated from a pool of
buffers.  When a process dies, we want to reclaim these buffers -- but
we must make sure there are no pending RDMA operations to/from those
buffers.  The only way to achieve that is by using unmap and sync the
TPT.

However, when the sequence count is reset on unmap, there is a high
likelihood that a new mapping will be given the same R_Key that was
issued a few milliseconds ago.

To prevent this, don't reset the sequence count when unmapping a FMR.

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Stefan Roscher d227fa7288 IB/ehca: Allocate event queue size depending on max number of CQs and QPs
If a lot of QPs fall into Error state at once and the EQ of the
respective HCA is too small, it might overrun, causing the eHCA driver
to stop processing completion events and calling the application's
completion handlers, effectively causing traffic to stop.

Fix this by limiting available QPs and CQs to a customizable max
count, and determining EQ size based on these counts and a worst-case
assumption.

Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Eli Cohen f56bcd8013 IPoIB: Use separate CQ for UD send completions
Use a dedicated CQ for UD send completions. Also, do not arm the UD
send CQ, which reduces the number of interrupts generated.  This patch
farther reduces overhead by not calling poll CQ for every posted send
WR -- it does polls only when there 16 or more outstanding work requests.

Signed-off-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:53 -07:00
Eli Dorfman 87528227df IB/iser: Count FMR alignment violations per session
Count FMR alignment violations per session as part of the iscsi
statistics.

Signed-off-by: Eli Dorfman <elid@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Eli Dorfman 6f735e36ba IB/iser: Move high-volume debug output to higher debug level
Add another level for debug.

Signed-off-by: Eli Dorfman <elid@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00
Hoang-Nam Nguyen 7df109d917 IB/ehca: handle negative return value from ibmebus_request_irq() properly
ehca_create_eq() was assigning a signed return value to an unsiged
local variable and then checking if the variable was < 0, which meant
that errors were always ignored.  Fix this by using one variable for
signed integer return values and another for u64 hcall return values.

Bug originally found by Roel Kluin <12o3l@tiscali.nl>.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-29 13:46:52 -07:00