This adds DCON support for the OLPC XO. The DCON is found in XO-1 and
XO-1.5 hardware. The XO-1 has a CS5536 southbridge, while the XO-1.5
has a Via chipset; the GPIO magic that's necessary to communicate with
the DCON chip is unfortunately different across both platforms. This
driver supports both.
This driver is in bad state atm, so I'm requesting its inclusion into
staging so it can be cleaned up while staying in the kernel tree.
Original driver by Dave Woodhouse, and modified extensively by
Jordan Crouse, myself, Deepak Saxena, Paul Fox, Daniel Drake, and
probably others that I've missed.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Sprint 4G network uses a Wimax dongle with Beecem
chipset. The driver is typical of out of tree drivers, but
maybe useful for people, and the hardware is readily available.
Here is a staging ready version (i.e warts and all)
0. Started with Rel_5.2.7.3P1_USB from Sprint4GDeveloperPack-1.1
1. Consolidated files in staging
2. Remove Dos cr/lf
3. Remove unnecessary ioctl from usbbcm_fops
Applied patches that were in the developer pack, surprising
there were ones for 2.6.35 already.
This is compile tested only, see TODO for what still needs
to be done.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver is for the ENE card reader that can be found in many
different laptops. It was written by ENE, but cleaned up to
work properly in the kernel tree by Novell.
Signed-off-by: Al Cho <acho@novell.com>
Cc: <yiyingc@ene.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
AR6003 is a single stream, SDIO based 802.11 chipset from
Atheros optimized for mobile and embedded devices. ath6kl is a
cfg80211 driver for AR6003 and supports both the station and
AP mode of operation.
Station mode supports 802.11 a/b/g/n with HT20 on 2.4/5GHz and
HT40 only on 5GHz. Some of the other features include WPA/WPA2,
WPS, WMM, WMM-PS, and BT coexistence. AP mode can be operated
only in b/g mode with support for a subset of features mentioned
above.
The driver supports cfg80211 but comes with its own set of
wext ioctls which have historically supported some of our
customers with features like BT 3.0 and AP mode of operation.
For further details, please refer to:
http://wireless.kernel.org/en/users/Drivers/ath6kl
The driver requires firmware that runs on the chip's network
processor. The majority of it is stored in ROM. The binaries
that are downloaded and executed from RAM are as follows:
1) Patch against the code in ROM for bug fixes and feature
enhancements.
2) Code to copy the data from the OTP region of the memory
into RAM.
3) Calibration file carrying board specific data.
The above files need to be present in the directory
'/lib/firmware/ath6k/AR6003/hw2.0/' for the driver to initialize
the chip upon enumeration. The files can be downloaded from the
link specified at the following location:
http://wireless.kernel.org/en/users/Drivers/ath6kl#Download
This driver is only provided in the interim while we work on
the mac80211 replacement, ath6k. Once the mac80211 driver
achieves feature parity with the ath6kl driver, the ath6kl will
be deprecated and removed from staging.
Signed-off-by: Vipin Mehta <vmehta@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver for SBE Inc.'s dual port T3/E3 WAN cards. Based on
their original GPLed driver.
The original driver tarball is now accessible at
http://userweb.kernel.org/~chris/SBE_2T3_Linux_2.0c.tgz
It needs at least a new generic HDLC setup code (not yet written) before
moving to drivers/net/wan.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver for the Cypress West Bridge companion chip. Its
function is analogous to the North/South Bridges of PC environments
applied to embedded devices, in that it expands I/O and storage
capabilities of an embedded processor. The Astoria version, which this
driver applies to, functions as a USB, embedded memory and SDIO
controller. The kernel that this patch was applied to is linux-2.6.35,
although it was tested using the android kernel 2.6.29 running on the
Zoom 2 platform. In this system, it was used primarily as a sideloading
accelerator enabling direct data transfers between a USB host PC and
embedded memory without system overheads. Minor modifications were also
made to the kernel for this patch. These include changes such as
EXPORTing of fat_get_block in the kernel code. Another function,
mpage_cleardirty was also added to the memory management code. This
function is used to clear the dirty pages from a specific inode. This
allows for direct, file based DMA. None of these changes are believed to
have any negative impact on the kernel and may provide additional
benefit for other developers and drivers.
The driver, as submitted, was placed into the drivers/staging/westbridge
folder as the directory structure it will eventually reside in is not yet
defined. The driver, as placed in staging is divided into four parts:
1) gadget - this implements a gadget peripheral controller and includes IOCTLs
for MTP transfers
2) block -this implements a generic block device driver to enable access to
embedded memory
3) api -this is the Cypress SDK, and includes USB and Storage specific
functions. In addition, it includes common code for low level routines such as
message passing and common data transfer routines
4) hal - this should likely be included in the arch directory as it needs to
be modified for a given platform. The directory structure in the staging area
is meant to reflect the eventual location of where this code likely should be.
It is platform specific. In this case, the HAL included is for the Android
Zoom 2 platform. Here, West Bridge is connected to the GPMC (general purpose
memory controller) of the OMAP3. Specific timing needs to be enabled to ensure
reliable communication.
Many thanks to Greg KH for conducting initial reviews and providing pointers.
Please contact david.cross@cypress.com for questions, concerns or feedback.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that we have a much better driver for this device (rtl8712), delete
this driver as it is no longer needed.
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's currently stalled and the original submitter recommended that it
just be dropped at this point in time due.
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This code is for a completely new version of the Realtek 8192 USB devices
such as the D-Link DWA-130. The Realtek code, which was originally for
Linux, Windows XP and Windows CE, has been stripped of all code not needed
for Linux. In addition, only one additional configuration variable, which
enables AP mode, remains.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Tested-by: Frederic Leroy <fredo@starox.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (88 commits)
ips driver: make it less chatty
intel_scu_ipc: fix size field for intel_scu_ipc_command
intel_scu_ipc: return -EIO for error condition in busy_loop
intel_scu_ipc: fix data packing of PMIC command on Moorestown
Clean up command packing on MRST.
zero the stack buffer before giving random garbage to the SCU
Fix stack buffer size for IPC writev messages
intel_scu_ipc: Use the new cpu identification function
intel_scu_ipc: tidy up unused bits
Remove indirect read write api support.
intel_scu_ipc: Support Medfield processors
intel_scu_ipc: detect CPU type automatically
x86 plat: limit x86 platform driver menu to X86
acpi ec_sys: Be more cautious about ec write access
acpi ec: Fix possible double io port registration
hp-wmi: acpi_drivers.h is already included through acpi.h two lines below
hp-wmi: Fix mixing up of and/or directive
dell-laptop: make dell_laptop_i8042_filter() static
asus-laptop: fix asus_input_init error path
msi-wmi: make needlessly global symbols static
...
There is now a proper V4L driver for this device in the tree,
so remove this one.
Cc: Scott Smedley <ss@aao.gov.au>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make the bits under staging/lirc/ buildable, and add a TODO note.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This adds the needed Kconfig and Makefile changes to add
the quickstart driver to the build.
Cc: Angelo Arrifano <miknix@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add Kconfig + Makefile for TI's DSP Bridge driver
and expose it to the staging menu.
For now, have tidspbridge depend on ARCH_OMAP3.
That dependency should be relaxed as soon as required cleanups are applied.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Kanigeri, Hari <h-kanigeri2@ti.com>
Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
Signed-off-by: Guzman Lugo, Fernando <fernando.lugo@ti.com>
Signed-off-by: Hebbar, Shivananda <x0hebbar@ti.com>
Signed-off-by: Ramos Falcon, Ernesto <ernesto@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Anna, Suman <s-anna@ti.com>
Signed-off-by: Gupta, Ramesh <grgupta@ti.com>
Signed-off-by: Gomez Castellanos, Ivan <ivan.gomez@ti.com>
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Armando Uribe De Leon <x0095078@ti.com>
Signed-off-by: Deepak Chitriki <deepak.chitriki@ti.com>
Signed-off-by: Menon, Nishanth <nm@ti.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Related changes:
- Modify revelant Kconfig and Makefile accordingly.
- Change include filenames in code.
- Remove dependency on CONFIG_SWAP in Kconfig as zram usage
is no longer limited to swap disks.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Qualcomm development of the MSM SOC framebuffer driver has
diverged significantly from the driver used by Android. This
is a snapshot of our current driver, in all it's agony. We are
putting this in staging to help with the process of converging
the two drivers.
At this point, the driver has been tested only in dumb
framebuffer mode.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
[dwalker@codeaurora.org: added a small compile fix and TODO.]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Touchscreen driver used by intel mid devices. Some clean up by Alan Cox. This
driver is basically ready for upstreaming properly but is tied wrongly to the
SPI layer and needs firmware/SFI changes to fix that.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver handles XG20, XG21, XG40, XG42 chipsets from XGI. They're
also known as Z7,Z9,Z11 chipsets. It's based on the SiS fb driver but
has been heavily modified by XGI to support their newer chipsets.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Conflicts:
drivers/staging/arlan/arlan-main.c
drivers/staging/comedi/drivers/cb_das16_cs.c
drivers/staging/cx25821/cx25821-alsa.c
drivers/staging/dt3155/dt3155_drv.c
drivers/staging/hv/hv.c
drivers/staging/netwave/netwave_cs.c
drivers/staging/wavelan/wavelan.c
drivers/staging/wavelan/wavelan_cs.c
drivers/staging/wlags49_h2/wl_cs.c
This required a bit of hand merging due to the conflicts
that happened in the later .34-rc releases, as well as
some staging driver changing coming in through other trees
(v4l and pcmcia).
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds the adis16255 driver to the build system under the staging directory.
It solves also most issues mentioned in TODO list:
- sample rate exported to sysfs
- spi_adis16255_bringup and spi_adis16255_shutdown encapsulated
- chip selftest in spi_adis16255_bringup
- kernel messages reduced to a reasonable number
I removed the TODO file, because ther was only the reset of the gyroscope left.
This is IMOH not necessary for the actual driver.
There are also some typos in adis.c file. This patch should get rid of them as well.
Signed-off-by: Matthias Brugger <mensch0815@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kernel module (device driver) for dt3155 frame grabber
video4linux2 compliant (finally). Works with "xawtv -f".
======================================================
This driver is written (almost) from scratch, using the
allocator developed for dt3155pci see bellow). The driver
uses videobuf-dma-contig interface modified to use the above
mentioned allocator instead of dma_alloc_coheren().
The first thing to do was to design a new allocator based
on allocating a configurable number of 4MB chunks of memory,
that latter are broken into frame buffers of 768x576 bytes
kept in different FIFOs (queues). As far as the driver autoloads
as a kernel module during kernel boot, the allocation of 4MB
chunks succeeds.
The driver keeps three FIFOs: one for 4MB chunks, one for free
buffers (available for allocations) and one for buffers already
allocated. Allocation/deallocation is done automatically though
the video4linux videobuf subsystem (some pointers to functions
are replaced by driver supplied functions).
Sure, there are problems:
1. The device tested to work with "xawtv -f" either via read()
method (DT3155_STREAMING not selected), or via mmap() method
(DT3155_STREAMING is selected) only. This coresponds to either
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
or
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
but not when
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_STREAMING |
V4L2_CAP_READWRITE;
This is because xawtv calls poll() before starting streaming,
but videobuf_poll_stream() automatically starts reading if streaming
is not started.
This selection is made during kernel configuration (for now).
2. Works for CCIR, but should work for RS-170 (not tested)
This is made also during kernel configuration.
3. Could work for multiple dt3155 frame grabbers in a PC,
(private data is allocated during PCI probe() method), but
is not tested due to lack of a second board.
4. Not tested on a BIG ENDIAN architecture.
5. Many others you could find .... :-)
All critics, comments, suggestions are wellcome.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This change adds the Kconfig and Make file for TI's
ST line discipline driver and the BlueZ driver for BT
core of the TI BT/FM/GPS combo chip.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
The Intel Restricted Access Region Handler provides a buffer allocation
mechanism to RAR users. Since the intended usage model is to lock out
CPU access to RAR (the CPU will not be able to access RAR memory), this
driver does not access RAR memory, and merely keeps track of what areas
of RAR memory are in use. It has it's own simple allocator that does
not rely on existing kernel allocators (SLAB, etc) since those
allocators are too tightly coupled with the paging mechanism, which isn't
needed for the intended RAR use cases.
An mmap() implementation is provided for debugging purposes to simplify
RAR memory access from the user space. However, it will effectively be
a no-op when RAR access control is enabled since the CPU will not be
able to access RAR.
This driver should not be confused with the rar_register driver. That
driver exposes an interface to access RAR registers on the Moorestown
platform. The RAR handler driver relies on the rar_register driver for
low level RAR register reads and writes.
This patch was generated and built against the latest linux-2.6 master
branch.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove staging/poch.
Reasons for removal are -- The driver has serious cache
issues, that I couldn't fix. The card vendor is working
on a better replacement for the driver. The driver has
been delayed a lot and development has come to a stand
still.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Obviously still needs serious attention, but it compiles.
Original author: Rick Dobbs
Add driver to support wanPMC-CxT1E1 card.
This card provides 1-4 ports of T1E1 in PMC form factor.
Note, Rick doesn't want his email showing up as the "From:" author, but
has given his blessing to have the code included in the kernel tree.
Signed-off-by: Bob Beers <bob.beers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Renames the directory in which the driver files
are located; again for clarity.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It turns out that Mimio has a userspace solution for this product using
libusb, and the in-kernel driver is just getting in the way now and
causing problems. So they have asked that the in-kernel driver be
removed. As the staging driver wasn't quite working anyway, and Mimio
supports their libusb solution for all distros, I am removing the
in-kernel driver.
The libusb solution can be downloaded from:
http://www.mimio.com/downloads/mimio_studio_software/linux.asp
Cc: <mwilder@cs.nmsu.edu>
Cc: Phil Hannent <phil@hannent.co.uk>
Cc: Marc Rousseau <Marc.Rousseau@mimio.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch supersedes the earlier ones sent by Manu Abraham to add
the Broadcom Crystal HD driver to the staging tree, per discussion
with him about it. I've been working with Broadcom's Naren Sankar
on this driver for a number of months, and had already talked Naren
about submitting this on Broadcom's behalf, didn't expect anyone
else to jump on submitting it as quickly as Manu did. ;)
This version is a one-shot deal, incorporating the original driver,
Manu's coding style clean-ups, udev device creation support from
Edgar 'gimli' Hucek, and a number of other small tweaks from myself
and Scott Davilla, the other individual who has been working closely
on this code with Naren and I.
I've tested this iteration of the code lightly on a mini pci-e board
in a ThinkPad T61p running x86_64 Fedora 12, with the expected results,
and will test further on other systems with other variants of the card
(I have three varieties of this device currently in hand). Scott has
also tested on assorted primarily i686 varieties of Ubuntu, and Naren
has tested with both Fedora and Ubuntu, iirc.
Note: only the 70012 is currently supported by this driver, 70015
support will follow later. Also note that Blu-Ray support isn't
enabled (at the firmware level), due to misc fun related to the
BD encryption scheme, DRM, etc. :\
I *do* have a git tree containing the driver, lib, gst plugin and
firmware that I'm working from at the moment[*], as there are inter-
dependencies between the driver and lib, and the driver can be used
with kernels going a ways back (I've only tested back to 2.6.18 as
it exists in Red Hat Enterprise Linux 5). I'm exporting from there,
into a linux-next tree, then generating patches from there. The goal
is to feed everything upstream as quickly as possible, but there are
users who want this code for earlier kernels too...
The firmware will be submitted for inclusion in dwmw2's linux-firmware
tree once there is a suitable redistribution-no-modification type of
license on it (I believe Naren is working with Broadcom legal to get
that in place).
Changelog from initial Broadcom release to here:
commit d20475d444610c5683d09e63f707f5bb22359062
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 13:55:16 2010 -0500
include: lib doesn't build w/o the removed stdint include
So add it back...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit c181070a330530b792d2b80e3ec6ab12a5a57394
Author: Scott Davilla <davilla@4pi.com>
Date: Mon Jan 4 13:38:37 2010 -0500
include: don't define VOID if its already defined
Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 33d8a2b691e81212e398f53770578d79650bf0bc
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 13:12:10 2010 -0500
driver: create crystalhd device using udev
Based on:
http://sourceforge.net/apps/trac/archvdr/browser/trunk/archvdr/crystalhd/use_udev.patch
Signed-off-by: Edgar ( gimli ) Hucek <ebsi4711 at gmail dot com>
Formatting tweaks, error-handling path fixups and any bugs added by Jarod.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit c44c64dea5537814796fcbe2d9db0209383c78b9
Author: Manu Abraham <abraham.manu@gmail.com>
Date: Mon Jan 4 10:32:47 2010 -0500
crystalhd: coding style cleanups
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit cffa6da7467ff697a656d1dfff54bb0513a053dc
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 10:17:27 2010 -0500
crystalhd: run dos2unix over everything, this is linux source...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 7fa38a282db7af5a5746055f7c6cef8a9b8ee138
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 10:02:33 2010 -0500
crystalhd: initial import of released Broadcom code
Straight import of:
http://www.broadcom.com/docs/support/crystalhd/crystalhd_linux_20091229.zip
Unfortunately, we're unable to publicly publish all the history that got
us from the initial internal code to what was released here, but such is
life, we can just be happy we've got this open-sourced now. :)
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No one seems to be able to maintain this, or merge it into mainline, so
remove it.
Acked-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No one seems to be maintaining this anymore, and it is not on any
track to be merged to mainline.
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has no users, and no developers to maintain it to get
it merged into mainline.
So sad.
Cc: Daniel Drake <ddrake@brontes3d.com>
Cc: Justin Bronder <jsbronder@brontes3d.com>
Cc: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
drm/radeon/kms: move radeon KMS on/off switch out of staging.
drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
drm/vmwgfx: Don't send bad flags to the host
drm/vmwgfx: Request SVGA version 2 and bail if not found
drm/vmwgfx: Correctly detect 3D
drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c
drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
drm/ttm: remove padding from ttm_ref_object on 64bit builds
drm/radeon/kms: release agp on error.
drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.
drm/kms/radeon: pick digitial encoders smarter. (v3)
drm/radeon/kms: use active device to pick connector for encoder
drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
We are happy enough that the KMS driver is stable enough for enough people
for the kms enable/disable to leave staging. Distros can now contemplate
turning this on.
Signed-off-by: Dave Airlie <airlied@redhat.com>
DST is dead, no one is using it and upstream
has abandoned it, so remove it from the tree because
it is not going anywhere.
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yeeloong netbook has a sm712 video card, need this driver, but it is not
ready to upstream yet, so, go to drivers/staing at first.
This source code is originally from Silicon Motion Technology Corp, and
maintained at http://dev.lemote.com/code/linux_loongson for YeeLoong
netbook. I have done a lot of cleanups for it and merged it into my git
repository at http://dev.lemote.com/code/rt4ls.
Thanks to Simon for testing it on a little-endian x86 platform.
Thanks to Olivier Croset <olivier.croset@actis-computer.com> for
reporting the problem about __BIG_ENDIAN compiling problem and send a
relative patch.
The suspend/resume and blank support are contributed by Jason from
Silicon Motion Technology.
Tested-by: Simon Braunschmidt <sbraun@emlix.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>