Commit Graph

21 Commits

Author SHA1 Message Date
Dave Kleikamp 8bcb2839b7 JFS: Fix bug in quota code. tmp_bh.b_size must be initialized
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2006-07-28 08:46:05 -05:00
Dave Kleikamp 115ff50bad JFS: Quota support broken, no quota_read and quota_write
jfs_quota_read/write are very near duplicates of ext2_quota_read/write.

Cleaned up jfs_get_block as long as I had to change it to be non-static.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2006-07-26 14:52:13 -05:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
David Howells 726c334223 [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry
Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.

This complements the get_sb() patch.  That reduced the significance of
sb->s_root, allowing NFS to place a fake root there.  However, NFS does
require a dentry to use as a target for the statfs operation.  This permits
the root in the vfsmount to be used instead.

linux/mount.h has been added where necessary to make allyesconfig build
successfully.

Interest has also been expressed for use with the FUSE and XFS filesystems.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:45 -07:00
David Howells 454e2398be [PATCH] VFS: Permit filesystem to override root dentry on mount
Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.

The filesystem is then required to manually set the superblock and root dentry
pointers.  For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).

The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.

This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing.  In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.

The patch also makes the following changes:

 (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
     pointer argument and return an integer, so most filesystems have to change
     very little.

 (*) If one of the convenience function is not used, then get_sb() should
     normally call simple_set_mnt() to instantiate the vfsmount. This will
     always return 0, and so can be tail-called from get_sb().

 (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
     dcache upon superblock destruction rather than shrink_dcache_anon().

     This is required because the superblock may now have multiple trees that
     aren't actually bound to s_root, but that still need to be cleaned up. The
     currently called functions assume that the whole tree is rooted at s_root,
     and that anonymous dentries are not the roots of trees which results in
     dentries being left unculled.

     However, with the way NFS superblock sharing are currently set to be
     implemented, these assumptions are violated: the root of the filesystem is
     simply a dummy dentry and inode (the real inode for '/' may well be
     inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
     with child trees.

     [*] Anonymous until discovered from another tree.

 (*) The documentation has been adjusted, including the additional bit of
     changing ext2_* into foo_* in the documentation.

[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:45 -07:00
Paul Jackson fffb60f93c [PATCH] cpuset memory spread: slab cache format
Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD.  This patch
contains only formatting changes, and no function change.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:23 -08:00
Paul Jackson 4b6a9316fa [PATCH] cpuset memory spread: slab cache filesystems
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.

If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.

The following inode and similar caches are marked SLAB_MEM_SPREAD:

    file                               cache
    ====                               =====
    fs/adfs/super.c                    adfs_inode_cache
    fs/affs/super.c                    affs_inode_cache
    fs/befs/linuxvfs.c                 befs_inode_cache
    fs/bfs/inode.c                     bfs_inode_cache
    fs/block_dev.c                     bdev_cache
    fs/cifs/cifsfs.c                   cifs_inode_cache
    fs/coda/inode.c                    coda_inode_cache
    fs/dquot.c                         dquot
    fs/efs/super.c                     efs_inode_cache
    fs/ext2/super.c                    ext2_inode_cache
    fs/ext2/xattr.c (fs/mbcache.c)     ext2_xattr
    fs/ext3/super.c                    ext3_inode_cache
    fs/ext3/xattr.c (fs/mbcache.c)     ext3_xattr
    fs/fat/cache.c                     fat_cache
    fs/fat/inode.c                     fat_inode_cache
    fs/freevxfs/vxfs_super.c           vxfs_inode
    fs/hpfs/super.c                    hpfs_inode_cache
    fs/isofs/inode.c                   isofs_inode_cache
    fs/jffs/inode-v23.c                jffs_fm
    fs/jffs2/super.c                   jffs2_i
    fs/jfs/super.c                     jfs_ip
    fs/minix/inode.c                   minix_inode_cache
    fs/ncpfs/inode.c                   ncp_inode_cache
    fs/nfs/direct.c                    nfs_direct_cache
    fs/nfs/inode.c                     nfs_inode_cache
    fs/ntfs/super.c                    ntfs_big_inode_cache_name
    fs/ntfs/super.c                    ntfs_inode_cache
    fs/ocfs2/dlm/dlmfs.c               dlmfs_inode_cache
    fs/ocfs2/super.c                   ocfs2_inode_cache
    fs/proc/inode.c                    proc_inode_cache
    fs/qnx4/inode.c                    qnx4_inode_cache
    fs/reiserfs/super.c                reiser_inode_cache
    fs/romfs/inode.c                   romfs_inode_cache
    fs/smbfs/inode.c                   smb_inode_cache
    fs/sysv/inode.c                    sysv_inode_cache
    fs/udf/super.c                     udf_inode_cache
    fs/ufs/super.c                     ufs_inode_cache
    net/socket.c                       sock_inode_cache
    net/sunrpc/rpc_pipe.c              rpc_inode_cache

The choice of which slab caches to so mark was quite simple.  I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch.  Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.

Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:23 -08:00
Dave Kleikamp 69eb66d7da JFS: add uid, gid, and umask mount options
OS/2 doesn't initialize the uid, gid, or unix-style permission bits.  The
uid, gid, & umask mount options perform pretty much like those for the fat
file system, overriding what is stored on disk.  This is useful for users
sharing the file system with OS/2.

I implemented a little feature so that if you mask the execute bit, it
will be re-enabled on directories when the appropriate read bit is unmasked.
I didn't want to implement an fmask & dmask option.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2006-03-09 13:59:30 -06:00
Eric Sesterhenn 5b3030e390 JFS: kzalloc conversion
this converts fs/jfs to kzalloc() usage.
compile tested with make allyesconfig

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2006-02-23 09:47:13 -06:00
Christoph Hellwig 91dbb4deb3 JFS: Use the kthread_ API
Use the kthread_ API instead of opencoding lots of hairy code for kernel
thread creation and teardown.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2006-02-15 12:49:04 -06:00
Ingo Molnar 1de87444f8 JFS: semaphore to mutex conversion.
the conversion was generated via scripts, and the result was validated
automatically via a script as well.

build and boot tested.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2006-01-24 15:22:50 -06:00
OGAWA Hirofumi 28fd129827 [PATCH] Fix and add EXPORT_SYMBOL(filemap_write_and_wait)
This patch add EXPORT_SYMBOL(filemap_write_and_wait) and use it.

See mm/filemap.c:

And changes the filemap_write_and_wait() and filemap_write_and_wait_range().

Current filemap_write_and_wait() doesn't wait if filemap_fdatawrite()
returns error.  However, even if filemap_fdatawrite() returned an
error, it may have submitted the partially data pages to the device.
(e.g. in the case of -ENOSPC)

<quotation>
Andrew Morton writes,

If filemap_fdatawrite() returns an error, this might be due to some
I/O problem: dead disk, unplugged cable, etc.  Given the generally
crappy quality of the kernel's handling of such exceptions, there's a
good chance that the filemap_fdatawait() will get stuck in D state
forever.
</quotation>

So, this patch doesn't wait if filemap_fdatawrite() returns the -EIO.

Trond, could you please review the nfs part?  Especially I'm not sure,
nfs must use the "filemap_fdatawrite(inode->i_mapping) == 0", or not.

Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:47 -08:00
Dave Kleikamp ac17b8b570 JFS: make special inodes play nicely with page balancing
This patch fixes up a few problems with jfs's reserved inodes.

1. There is no need for the jfs code setting the I_DIRTY bits in i_state.
   I am ashamed that the code ever did this, and surprised it hasn't been
   noticed until now.

2. Make sure special inodes are on an inode hash list.  If the inodes are
   unhashed, __mark_inode_dirty will fail to put the inode on the
   superblock's dirty list, and the data will not be flushed under memory
   pressure.

3. Force writing journal data to disk when metapage_writepage is unable to
   write a metadata page due to pending journal I/O.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2005-10-03 15:32:11 -05:00
Mark Bellon 8fc2751beb [PATCH] disk quotas fail when /etc/mtab is symlinked to /proc/mounts
If /etc/mtab is a regular file all of the mount options (of a file system)
are written to /etc/mtab by the mount command.  The quota tools look there
for the quota strings for their operation.  If, however, /etc/mtab is a
symlink to /proc/mounts (a "good thing" in some environments) the tools
don't write anything - they assume the kernel will take care of things.

While the quota options are sent down to the kernel via the mount system
call and the file system codes handle them properly unfortunately there is
no code to echo the quota strings into /proc/mounts and the quota tools
fail in the symlink case.

The attached patchs modify the EXT[2|3] and JFS codes to add the necessary
hooks.  The show_options function of each file system in these patches
currently deal with only those things that seemed related to quotas;
especially in the EXT3 case more can be done (later?).

Jan Kara also noted the difficulty in moving these changes above the FS
codes responding similarly to myself to Andrew's comment about possible
VFS migration. Issue summary:

 - FS codes have to process the entire string of options anyway.

 - Only FS codes that use quotas must have a show_options function (for
   quotas to work properly) however quotas are only used in a small number
   of FS.

 - Since most of the quota using FS support other options these FS codes
   should have the a show_options function to show those options - and the
   quota echoing becomes virtually negligible.

Based on feedback I have modified my patches from the original:

   JFS a missing patch has been restored to the posting
   EXT[2|3] and JFS always use the show_options function
       - Each FS has at least one FS specific option displayed
       - QUOTA output is under a CONFIG_QUOTA ifdef
       - a follow-on patch will add a multitude of options for each FS
   EXT[2|3] and JFS "quota" is treated as "usrquota"
   EXT3 journalled data check for journalled quota removed
   EXT[2|3] mount when quota specified but not compiled in

 - no changes from my original patch.  I tested the patch and the codes
   warn but

 - still mount.  With all due respection I believe the comments
   otherwise were a

 - misread of the patch.  Please reread/test and comment.  XFS patch
   removed - the XFS team already made the necessary changes EXT3 mixing
   old and new quotas are handled differently (not purely exclusive)

 - if old and new quotas for the same type are used together the old
   type is silently depricated for compatability (e.g.  usrquota and
   usrjquota)

 - mixing of old and new quotas is an error (e.g.  usrjquota and
   grpquota)

Signed-off-by: Mark Bellon <mbellon@mvista.com>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:23 -07:00
Dave Kleikamp 8a9cd6d676 JFS: Fix race in txLock
TxAnchor.anon_list is protected by jfsTxnLock (TXN_LOCK), but there was
a place in txLock() that was removing an entry from the list without holding
the spinlock.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2005-08-10 11:14:39 -05:00
Dave Kleikamp cbc3d65ebc JFS: Improve sync barrier processing
Under heavy load, hot metadata pages are often locked by non-committed
transactions, making them difficult to flush to disk.  This prevents
the sync point from advancing past a transaction that had modified the
page.

There is a point during the sync barrier processing where all
outstanding transactions have been committed to disk, but no new
transaction have been allowed to proceed.  This is the best time
to write the metadata.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2005-07-27 09:17:57 -05:00
Christoph Hellwig 9a59f452ab [PATCH] remove <linux/xattr_acl.h>
This file duplicates <linux/posix_acl_xattr.h>, using slightly different
names.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:33 -07:00
Dave Kleikamp 1868f4aa5a JFS: fix sparse warnings by moving extern declarations to headers
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
2005-05-04 15:29:35 -05:00
Dave Kleikamp 1c6278295d [PATCH] JFS: Write journal sync points more often
This patch adds jfs_syncpt, which calls lmLogSync to write sync points
to the journal both in jfs_sync_fs and when sync barrier processing
completes.

lmLogSync accomplishes two things:  1) it pushes logged-but-dirty
metadata pages to disk, and 2) it writes a sync record to the journal
so that jfs_fsck doesn't need to replay more transactions than is
necessary.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-02 22:23:53 -07:00
Dave Kleikamp 7fab479beb [PATCH] JFS: Support page sizes greater than 4K
jfs has never worked on architecutures where the page size was not 4K.

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-02 22:23:53 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00