Commit Graph

28 Commits

Author SHA1 Message Date
Will Deacon d968d2b801 ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses
Breakpoint validation currently fails for single-byte watchpoints on
addresses ending in 11b. There is no reason to forbid such a watchpoint,
so extend the validation code to allow it.

Cc: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25 09:15:23 +01:00
Will Deacon bf8801145c ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access type
From ARM debug architecture v7.1 onwards, a watchpoint exception causes
the DFAR to be updated with the faulting data address. However, DFSR.WnR
takes an UNKNOWN value and therefore cannot be used in general to
determine the access type that triggered the watchpoint.

This patch forbids watchpoints without an overflow handler from
specifying a specific access type (load/store). Those with overflow
handlers must be able to handle false positives potentially triggered by
a watchpoint of a different access type on the same address. For
SIGTRAP-based handlers (i.e. ptrace), this should have no impact.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-25 09:15:23 +01:00
David Howells 9f97da78bf Disintegrate asm/system.h for ARM
Disintegrate asm/system.h for ARM.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Russell King <linux@arm.linux.org.uk>
cc: linux-arm-kernel@lists.infradead.org
2012-03-28 18:30:01 +01:00
Catalin Marinas f7b8156d15 ARM: LPAE: Add fault handling support
The DFSR and IFSR register format is different when LPAE is enabled. In
addition, DFSR and IFSR have similar definitions for the fault type.
This modifies the fault code to correctly handle the new format.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-12-08 10:30:40 +00:00
Will Deacon a26bce1220 ARM: 7127/1: hw_breakpoint: skip v7-specific reset on v6 cores
ARMv6 cores do not implement the DBGOSLAR register, so we don't need to
try and clear it on boot. Furthermore, the VCR is zeroed out of reset,
so we don't need to zero it explicitly when a CPU comes online.

Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-08 10:05:34 +01:00
Will Deacon d12443363e ARM: hw_breakpoint: reduce the number of WARN_ONCE invocations
The ARM hw_breakpoint backend is currently a bit too noisy when things
start to go awry.

This patch removes a couple of over-zealous WARN_ONCE invocations and
replaces then with pr_warnings instead.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:42:48 +01:00
Will Deacon 0d352e3d00 ARM: hw_breakpoint: trap undef instruction exceptions in reset_ctrl_regs
The ARM debug registers can only be accessed if the DBGSWENABLE signal
to the core is driven HIGH by the DAP. The architecture does not provide
a way to detect the value of this signal, so the best we can do is
register an undef_hook to trap debug register co-processor accesses and
then fail if the trap is taken.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:42:48 +01:00
Will Deacon 6f26aa05c9 ARM: hw_breakpoint: add support for multiple watchpoints
ARM debug architecture 7.1 mandates that the DFAR is updated on a
watchpoint debug exception to contain the faulting virtual address
of the memory access. This allows us to determine which watchpoints
have fired and therefore report useful information to userspace.

This patch adds support for using the DFAR in the watchpoint handler,
which allows us to support multiple watchpoints on CPUs implementing
the new debug architecture.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:42:48 +01:00
Will Deacon c512de955f ARM: hw_breakpoint: reserve one breakpoint for watchpoint stepping
The current hw_breakpoint code on ARM reserves 1 breakpoint for each
watchpoint that is available. Since debug architectures prior to 7.1
are restricted to 1 watchpoint anyway, only one breakpoint was ever
reserved.

This patch changes the reservation strategy so that a single breakpoint
is reserved, regardless of the number of watchpoints. This is in
preparation for multiple-watchpoint support on debug architectures
from 7.1 onwards.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:42:48 +01:00
Will Deacon b5d5b8f986 ARM: hw_breakpoint: add initial Cortex-A15 (debug v7.1) support
This patch adds initial support for Cortex-A15 (debug architecture v7.1)
to the hw_breakpoint ARM backend.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-31 10:42:47 +01:00
Russell King 02fe2845d6 ARM: entry: avoid enabling interrupts in prefetch/data abort handlers
Avoid enabling interrupts if the parent context had interrupts enabled
in the abort handler assembly code, and move this into the breakpoint/
page/alignment fault handlers instead.

This gets rid of some special-casing for the breakpoint fault handlers
from the low level abort handler path.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-02 10:56:00 +01:00
Will Deacon e89c0d7090 ARM: 6864/1: hw_breakpoint: clear DBGVCR out of reset
The DBGVCR, used for configuring vector catch debug events, is UNKNOWN
out of reset on ARMv7. When enabling monitor mode, this must be zeroed
to avoid UNPREDICTABLE behaviour.

This patch adds the zeroing code to the debug reset path.

Cc: stable <stable@kernel.org>
Reported-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:35 +01:00
Stephen Boyd 7d85d61f6a ARM: 6797/1: hw_breakpoint: Fix newlines in WARNings
These warnings are missing newlines and spaces causing confusing
looking output when they trigger.

Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-10 10:03:45 +00:00
Will Deacon c09bae7091 ARM: 6768/1: hw_breakpoint: ensure debug logic is powered up on v7 cores
ARMv7 allows the debug core logic to be powered down and provides the
DBGPRSR register so that software can power-up and check the status of
the logic.

This patch ensures that the debug logic is powered up on ARMv7 cores
before we attempt to access the extended debug registers.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-26 13:35:51 +00:00
Will Deacon 66e1cfe6d5 ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch
The ptrace debug information register was advertising breakpoint and
watchpoint resources for unsupported debug architectures. This meant
that setting breakpoints on these architectures would appear to succeed,
although they would never fire in reality.

This patch fixes the breakpoint slot probing so that it returns 0 when
running on an unsupported debug architecture.

Reported-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11 22:54:48 +00:00
Will Deacon ed19b739c5 ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR
Reading baseline CP14 registers, other than DBGDIDR, when the OS Lock
is set leads to UNPREDICTABLE behaviour.

This patch ensures that we clear the OS lock before accessing anything
other than the DBGDIDR, thereby avoiding this behaviour.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11 22:54:47 +00:00
Will Deacon 8fbf397c33 ARM: hw_breakpoint: do not fail initcall if monitor mode is disabled
The debug registers can only be manipulated from software if monitor
debug mode is enabled. On some cores, this can never be enabled (i.e.
the corresponding bit in the DSCR is RAZ/WI).

This patch ensures we can handle this hardware configuration and fail
gracefully, rather than blow up the kernel during boot.

Reported-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-15 12:31:03 +00:00
Will Deacon 4a55c18e20 ARM: hw_breakpoint: fix warnings generated by sparse
sparse doesn't like per-cpu accesses such as:

static DEFINE_PER_CPU(struct perf_event *, foo[MAXLEN]);
struct perf_event **bar = __get_cpu_var(foo);

and shouts quite loudly about it:

| warning: incorrect type in assignment (different modifiers)
|    expected struct perf_event **slots
|    got struct perf_event *[noderef] *<noident>

This patch adds casts to these sorts of assignments in hw_breakpoint.c
in order to silence the warnings.

Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:57 +00:00
Will Deacon 3ce70b2e24 ARM: hw_breakpoint: disallow per-cpu breakpoints without overflow handler
Single-stepping a breakpoint requires us to disable it temporarily so that
we don't get stuck in a recursive debug trap. With per-cpu breakpoints this
presents a problem where an interrupt can be taken before the single-step has
completed and a new task is eventually scheduled. This new task will not
hit the breakpoint because it will have been disabled during the previous
handling code.

This patch disallows per-cpu breakpoints on ARM when an overflow handler
is not present. A similar effect can be created by placing breakpoints on
a shell and then running applications there.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:57 +00:00
Will Deacon 9ebb3cbcc3 ARM: hw_breakpoint: unify single-stepping code for watchpoints and breakpoints
The single-stepping code is currently different depending on whether
we are stepping over a breakpoint or a watchpoint. There is no good
reason for this, so let's sort it out.

This patch adds functions for enabling/disabling single-step for
a particular hw_breakpoint and integrates this with the exception
handling code.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:57 +00:00
Will Deacon 93a04a3416 ARM: hw_breakpoint: do not allocate new breakpoints with preemption disabled
The watchpoint single-stepping code calls register_user_hw_breakpoint to
register a mismatch breakpoint for stepping over the watchpoint. This is
performed with preemption disabled, which is unsafe as we may end up scheduling
whilst in_atomic(). Furthermore, using the perf API is rather overkill since
we are already in the hw-breakpoint backend and only require access to reserved
breakpoints anyway.

This patch reworks the watchpoint stepping code so that we don't require
another perf_event for the mismatch breakpoint. Instead, we hold a separate
arch_hw_breakpoint_ctrl struct inside the watchpoint which is used exclusively
for stepping. We can check whether or not stepping is enabled when installing
or uninstalling the watchpoint and operate on the breakpoint accordingly.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:57 +00:00
Will Deacon 0017ff42ac ARM: hw_breakpoint: don't advertise reserved breakpoints
To permit handling of watchpoint exceptions without signalling a
debugger, it is necessary to reserve breakpoint registers for in-kernel
use only.

This patch ensures that we record and subtract the number of reserved
breakpoints from the number of usable breakpoint registers that we
advertise to userspace via the ptrace API.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:56 +00:00
Will Deacon 7e20269647 ARM: hw_breakpoint: disable preemption during debug exception handling
On ARM, debug exceptions occur in the form of data or prefetch aborts.
One difference is that debug exceptions require access to per-cpu banked
registers and data structures which are not saved in the low-level exception
code. For kernels built with CONFIG_PREEMPT, there is an unlikely scenario
that the debug handler ends up running on a different CPU from the one
that originally signalled the event, resulting in random data being read
from the wrong registers.

This patch adds a debug_entry macro to the low-level exception handling
code which checks whether the taken exception is a debug exception. If
it is, the preempt count for the faulting process is incremented. After
the debug handler has finished, the count is decremented.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:56 +00:00
Will Deacon 6ee33c2712 ARM: hw_breakpoint: correct and simplify alignment fixup code
The current hw_breakpoint code tries to fix up the alignment of
breakpoints so that we can make use of sparse byte-address-select
bits in the control register and give the illusion that we can
set breakpoints on unaligned addresses.

Although this works on v6 cores, v7 forbids this behaviour, instead
requiring breakpoints to be set on aligned addresses and have contiguous
byte-address-select ranges depending on the instruction set in use.
For ARM the only supported size is 4 bytes, whilst Thumb-2 also permits
2 byte breakpoints (watchpoints can be of 1, 2, 4 or 8 bytes long).

This patch simplifies the alignment fixup code so that we require
addresses to be aligned to the size of the corresponding breakpoint.
This allows us to handle the common case of breaking on a half-word
aligned Thumb-2 instruction and also allows us to set byte watchpoints
on arbitrary addresses.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:56 +00:00
Will Deacon 7d99331e47 ARM: hw_breakpoint: reset control registers in hotplug path
The ARMv7 debug architecture doesn't make any guarantees about the
contents of debug control registers following a debug logic reset.

This patch ensures that we reset the control registers when a cpu
comes ONLINE (for example, with hotplug) so that when we enable
monitor mode while inserting a breakpoint we won't exhibit random
behaviour.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:56 +00:00
Will Deacon ac88e07122 ARM: hw_breakpoint: ensure OS lock is clear before writing to debug registers
ARMv7 architects a system for saving and restoring the debug registers
across low-power modes. At the heart of this system is a lock register
which, when set, forbids writes to the debug registers. While locked,
writes to debug registers via the co-processor interface will result
in undefined instruction traps. Linux currently doesn't make use of
this feature because we update the debug registers on context switch
anyway, however the status of the lock is IMPLEMENTATION DEFINED on
reset.

This patch ensures that the lock is cleared during boot so that we
can write to the debug registers safely.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2010-12-06 11:55:56 +00:00
Joe Perches 235584b6f3 ARM: arch/arm/kernel/hw_breakpoint.c: Convert WARN_ON to WARN
Message isn't printed by WARN_ON.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-07 17:58:39 +00:00
Will Deacon f81ef4a920 ARM: 6356/1: hw-breakpoint: add ARM backend for the hw-breakpoint framework
The hw-breakpoint framework in the kernel requires architecture-specific
support in order to install, remove, validate and manage hardware
breakpoints.

This patch adds initial support for this framework to the ARM architecture,
but restricts the number of watchpoints to a single resource to get around
the fact that the Data Fault Address Register is unknown when a watchpoint
debug exception is taken.

On cores with v7 debug, the Kernel can handle breakpoint and watchpoint
exceptions occuring from userspace. Older cores require clients to handle
the exception themselves by registering an appropriate overflow handler
or, in the case of ptrace, handling the raised SIGTRAP.

The memory-mapped extended debug interface is unsupported due to its
unreliability in real implementations.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: S. Karthikeyan <informkarthik@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08 10:05:00 +01:00