Commit Graph

45 Commits

Author SHA1 Message Date
Chao Xie fb054bf269 Input: pxa27x_keypad add choice to set direct_key_mask
Direct keys usage may not start from KP_DKIN0, add a msk option
to configure the specifics for platforms that can skip some keys.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27 16:50:05 +08:00
Chao Xie ee1d8040a6 Input: pxa27x_keypad direct key may be low active
KPDK_DK only indicates the pin level of direct key.
So it is related to board, and low level may be active which
indicates that a key is pressed.

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-04-27 16:49:07 +08:00
Arnd Bergmann 58a273745f Merge branches 'drivers/macb-gem' and 'drivers/pxa-gpio' into next/drivers 2011-11-23 20:47:41 +00:00
Haojian Zhuang 157d2644cb ARM: pxa: change gpio to platform device
Remove most gpio macros and change gpio driver to platform driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-15 19:08:27 +08:00
Haojian Zhuang 1a8d5fab16 ARM: pxa: rename NR_BUILTIN_GPIO
NR_BUILTIN_GPIO is both defined in arch-pxa and arch-mmp. Now replace it
with PXA_NR_BUILTIN_GPIO and MMP_NR_BUILTIN_GPIO.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14 21:07:59 +08:00
Haojian Zhuang 4929f5a8a9 ARM: pxa: rename gpio_to_irq and irq_to_gpio
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name
confliction since multiple architecture will be built together.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
2011-11-14 21:07:59 +08:00
Linus Torvalds e0d65113a7 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (226 commits)
  mtd: tests: annotate as DANGEROUS in Kconfig
  mtd: tests: don't use mtd0 as a default
  mtd: clean up usage of MTD_DOCPROBE_ADDRESS
  jffs2: add compr=lzo and compr=zlib options
  jffs2: implement mount option parsing and compression overriding
  mtd: nand: initialize ops.mode
  mtd: provide an alias for the redboot module name
  mtd: m25p80: don't probe device which has status of 'disabled'
  mtd: nand_h1900 never worked
  mtd: Add DiskOnChip G3 support
  mtd: m25p80: add EON flash EN25Q32B into spi flash id table
  mtd: mark block device queue as non-rotational
  mtd: r852: make r852_pm_ops static
  mtd: m25p80: add support for at25df321a spi data flash
  mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks
  mtd: nand: switch `check_pattern()' to standard `memcmp()'
  mtd: nand: invalidate cache on unaligned reads
  mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set
  mtd: nand: wait to set BBT version
  mtd: nand: scrub BBT on ECC errors
  ...

Fix up trivial conflicts:
 - arch/arm/mach-at91/board-usb-a9260.c
	Merged into board-usb-a926x.c
 - drivers/mtd/maps/lantiq-flash.c
	add_mtd_partitions -> mtd_device_register vs changed to use
	mtd_device_parse_register.
2011-11-07 09:11:16 -08:00
Arnd Bergmann 43872fa788 Merge branch 'depends/rmk/gpio' into next/fixes
This sorts out merge conflicts with the arm/gpio branch that
already got merged into mainline Linux.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31 22:44:18 +01:00
Arnd Bergmann 97b09da4ee ARM: pxa: use correct __iomem annotations
This tries to clear up the confusion between integers and iomem pointers
in the marvell pxa platform. MMIO addresses are supposed to be __iomem*
values, in order to let the Linux type checking work correctly. This
patch moves the cast to __iomem as far back as possible, to the place
where the MMIO virtual address windows are defined.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-08 21:03:07 +08:00
Linus Walleij f55be1bf52 ARM: 7104/1: plat-pxa: break out GPIO driver specifics
The <mach/gpio.h> file is included from upper directories
and deal with generic GPIO and gpiolib stuff. Break out the
platform and driver specific defines and functions into its own
header file.

Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01 23:45:34 +01:00
Lei Wen f3c8cfc237 mtd: pxa3xx_nand: enable multiple chip select support
Current pxa3xx_nand controller has two chip select which
both be workable. This patch enable this feature.

Update platform driver to support this feature.

Another notice should be taken that:
When you want to use this feature, you should not enable the
keep configuration feature, for two chip select could be
attached with different nand chip. The different page size
and timing requirement make the keep configuration impossible.

Signed-off-by: Lei Wen <leiwen@marvell.com>
2011-09-11 15:02:15 +03:00
Russell King 8f3c4537bb ARM: gpio: make trivial GPIOLIB implementation the default
Rather than marking the mach/gpio.h header files which want to use the
trivial GPIOLIB implementation, mark those which do not want to use it
instead.  This means that by default, you get the trivial implementation
and only have to do something extra if you need to.  This should
encourage the use of the trivial default implementation.

As an additional bonus, several gpio.h header files become empty.

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-12 08:54:19 +01:00
Zhangfei Gao bfed345edf mmc: sdhci-pxa: move platform data to include/linux/platform_data
As suggested by Arnd, move platform data to include/linux/platform_data
in order to improve build coverage for the driver.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:20:52 -04:00
Zhangfei Gao a702c8abb2 mmc: host: split up sdhci-pxa, create sdhci-pxav3.c
sdhci-pltfm driver for PXAV3 SoCs, such as MMP2.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Philip Rakity <prakity@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-20 17:20:49 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Artem Bityutskiy 7bf7e370d5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus-1
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits)
  [media] rc: update for bitop name changes
  fs: simplify iget & friends
  fs: pull inode->i_lock up out of writeback_single_inode
  fs: rename inode_lock to inode_hash_lock
  fs: move i_wb_list out from under inode_lock
  fs: move i_sb_list out from under inode_lock
  fs: remove inode_lock from iput_final and prune_icache
  fs: Lock the inode LRU list separately
  fs: factor inode disposal
  fs: protect inode->i_state with inode->i_lock
  lib, arch: add filter argument to show_mem and fix private implementations
  SLUB: Write to per cpu data when allocating it
  slub: Fix debugobjects with lockless fastpath
  autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
  autofs4 - remove autofs4_lock
  autofs4 - fix d_manage() return on rcu-walk
  autofs4 - fix autofs4_expire_indirect() traversal
  autofs4 - fix dentry leak in autofs4_expire_direct()
  autofs4 - reinstate last used update on access
  vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
  ...

NOTE!

This merge commit was created to fix compilation error. The block
tree was merged upstream and removed the 'elv_queue_empty()'
function which the new 'mtdswap' driver is using. So a simple
merge of the mtd tree with upstream does not compile. And the
mtd tree has already be published, so re-basing it is not an option.

To fix this unfortunate situation, I had to merge upstream into the
mtd-2.6.git tree without committing, put the fixup patch on top of
this, and then commit this. The result is that we do not have commits
which do not compile.

In other words, this merge commit "merges" 3 things: the MTD tree, the
upstream tree, and the fixup patch.
2011-03-25 17:41:20 +02:00
Sebastian Andrzej Siewior b459396ee9 ARM: pxa2xx: reorganize I2C files
This patch moves the platform data definition from
arch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so
it can be accessed from x86 the same way as on ARM.

This change should make no functional change to the PXA code. The move
is verified by building the following defconfigs:
  cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
  imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
  raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig
  pxa910_defconfig

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-03-21 09:09:33 +00:00
Lei Wen 4332c11686 mtd: pxa3xx_nand: clean the keep configure code
Use nand_scan_ident to unify the need of mtd member initilization
for both normal detection and keep configuration method.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11 14:22:51 +00:00
Lennert Buytenhek a3f4c927d3 ARM: PXA SoCs: irq_data conversion.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
2011-01-13 17:18:56 +01:00
Linus Torvalds 021db8e2bd Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits)
  spi/omap: Fix DMA API usage in OMAP MCSPI driver
  spi/imx: correct the test on platform_get_irq() return value
  spi/topcliff: Typo fix threhold to threshold
  spi/dw_spi Typo change diable to disable.
  spi/fsl_espi: change the read behaviour of the SPIRF
  spi/mpc52xx-psc-spi: move probe/remove to proper sections
  spi/dw_spi: add DMA support
  spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs
  spi/dw_spi: Fix too short timeout in spi polling loop
  spi/pl022: convert running variable
  spi/pl022: convert busy flag to a bool
  spi/pl022: pass the returned sglen to the DMA engine
  spi/pl022: map the buffers on the DMA engine
  spi/topcliff_pch: Fix data transfer issue
  spi/imx: remove autodetection
  spi/pxa2xx: pass of_node to spi device and set a parent device
  spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.
  spi/pxa2xx: Add chipselect support for Sodaville
  spi/pxa2xx: Consider CE4100's FIFO depth
  spi/pxa2xx: Add CE4100 support
  ...
2011-01-07 17:08:46 -08:00
Grant Likely 94a544a4e8 Merge branch 'spi' of git://git.linutronix.de/users/bigeasy/soda into spi/next
* 'spi' of git://git.linutronix.de/users/bigeasy/soda into spi/next
  spi/pxa2xx: register driver properly
  spi/pxa2xx: add support for shared IRQ handler
  spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers
  arm/pxa2xx: reorgazine SSP and SPI header files
  spi/pxa2xx: Add CE4100 support
  spi/pxa2xx: Consider CE4100's FIFO depth
  spi/pxa2xx: Add chipselect support for Sodaville
  spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.
  spi/pxa2xx: pass of_node to spi device and set a parent device
2010-12-29 01:05:50 -07:00
Haojian Zhuang a4553358d9 ARM: pxa: support pxa95x
The core of PXA955 is PJ4. Add new PJ4 support. And add new macro
CONFIG_PXA95x.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-12-18 21:02:14 +08:00
Sebastian Andrzej Siewior 8348c259dd arm/pxa2xx: reorgazine SSP and SPI header files
The PXA-SPI driver relies on some files / defines which are arm specific
and are within the ARM tree. The CE4100 SoC which is x86 has also the
SPI core.
This patch moves the ssp and spi files from arm/mach-pxa and plat-pxa to
include/linux where the CE4100 can access them.

This move got verified by building the following defconfigs:
   cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig
   imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig
   raumfeld_defconfig magician_defconfig

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-01 12:18:33 +01:00
Sebastian Andrzej Siewior 4a25605fb7 spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
2010-12-01 12:18:32 +01:00
Philip Rakity 15ec446119 mmc: sdhci: 8-bit bus width changes
We now:
 * check for a v3 controller before setting 8-bit bus width
 * offer a callback for platform code to switch to 8-bit mode, which
   allows non-v3 controllers to support it
 * rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify
   that the board designers have indeed brought out all the pins for
   8-bit to the slot.

We were previously relying only on whether the *controller* supported
8-bit, which doesn't tell us anything about the pin configuration in
the board design.

This fixes the MMC card regression reported by Maxim Levitsky here:
   http://thread.gmane.org/gmane.linux.kernel.mmc/4336
by no longer assuming that 8-bit works by default.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-22 15:12:04 -05:00
Linus Torvalds 79346507ad Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (82 commits)
  mtd: fix build error in m25p80.c
  mtd: Remove redundant mutex from mtd_blkdevs.c
  MTD: Fix wrong check register_blkdev return value
  Revert "mtd: cleanup Kconfig dependencies"
  mtd: cfi_cmdset_0002: make sector erase command variable
  mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips
  mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode
  mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one
  block2mtd: dubious assignment
  P4080/mtd: Fix the freescale lbc issue with 36bit mode
  P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
  mtd: phram: use KBUILD_MODNAME
  mtd: OneNAND: S5PC110: Fix double call suspend & resume function
  mtd: nand: fix MTD_MODE_RAW writes
  jffs2: use kmemdup
  mtd: sm_ftl: cosmetic, use bool when possible
  mtd: r852: remove useless pci powerup/down from suspend/resume routines
  mtd: blktrans: fix a race vs kthread_stop
  mtd: blktrans: kill BKL
  mtd: allow to unload the mtdtrans module if its block devices aren't open
  ...

Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
2010-10-30 08:31:35 -07:00
David Woodhouse 67577927e8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:
	drivers/mtd/mtd_blkdevs.c

Merge Grant's device-tree bits so that we can apply the subsequent fixes.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-30 12:35:11 +01:00
Zhangfei Gao 536ac998f6 mmc: add new sdhci-pxa driver for Marvell SoCs
Support Marvell PXA168/PXA910/MMP2 SD Host Controller.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-25 09:29:07 +08:00
Lei Wen c1f82478c5 mtd: pxa3xx_nand: condense the flash definition
Adding a new flash definition would need less code.
Keep the platform passing flash definition method.
If one flash is both defined in platform data and builtin table,
driver would select the one from platform data first.

By this way, platform could select the timing most suit for itself,
not need to follow the common settings.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-24 23:38:47 +01:00
Mark F. Brown 3587c25807 ARM: pxa27x_keypad: added wakeup event handler for keypad interrupts
mach-mmp needs to clear wake event in order to clear the keypad interrupt

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:19 +08:00
Mark F. Brown 4a2490eac8 ARM: pxa: moved pxa27x_keypad.h to platform pxa directory
mach-mmp utilizes pxa27x_keypad code so we need to move header to
platform pxa directory.

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-10-09 17:07:10 +08:00
Haojian Zhuang baffe1699c [ARM] pxa: add namespace on ssp
In order to prevent code ambiguous, add namespace on functions in ssp driver.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:06 +02:00
Haojian Zhuang 7f39403c56 [ARM] mmp: update mfp setting
Update mfp setting for mmp2.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:25:05 +02:00
Haojian Zhuang 7e4992288e [ARM] mmp: support ssp in pxa168
Support ssp devices in PXA168. PXA168 could reuse the code of PXA SSP.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:59 +02:00
Haojian Zhuang 004690f052 [ARM] pxa: simplify ifdef in ssp.h
Try to keep minimum ifdef in ssp.h.  Some of the definitions are valid
only to specific SoCs, and device drivers should be responsible to take
care of these difference.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:58 +02:00
Haojian Zhuang 54c39b420f [ARM] pxa: move ssp into common plat-pxa
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-11 17:24:58 +02:00
Haojian Zhuang 82b95ecb96 pxa3xx_nand: move pxa3xx_nand.h common into plat directory
Since the same nand controller is shared between ARCH_PXA and ARCH_MMP. Move
the pxa3xx_nand.h from mach directory to plat directoy.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: David Woodhouse <david.woodhouse@intel.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:43 +08:00
Eric Miao 9da4ea69f2 [ARM] pxa: fix incorrect mfp_to_gpio() conversion
Since MFP_PIN_GPIO* now includes 128-255, mfp_to_gpio() is no longer
valid for those additional pins, fix it.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13 17:30:21 +08:00
Haojian Zhuang 063936df92 [ARM] pxa: support mfp of pxa935
Add and initialize the mfp setting of pxa935 chip.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:24 +08:00
Daniel Mack fb60870f63 [ARM] pxa: add MFP_PULL_FLOAT
There is currently an uncovered case for MFP configuration on PXAs which
is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN
bits. This case is needed to explicitly let pins float, even if the
selected alternate function would default to a configuration with a pull
resistor enabled.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10 18:49:24 +08:00
Eric Miao f0a8370139 [ARM] pxa: move mach/i2c.h to plat/i2c.h
Signed-off-by: Paul Shen <paul.shen@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:32:01 +08:00
Eric Miao 14c6b5e7ad [ARM] pxa: add base support for Marvell PXA910
Signed-off-by: Bin Yang <bin.yang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:35 +08:00
Eric Miao f8dec04d33 [ARM] pxa: move common MFP handling code into plat-pxa
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:34 +08:00
Eric Miao 38f539a608 [ARM] pxa: move common GPIO handling code into plat-pxa
1. add common GPIO handling code into [arch/arm/plat-pxa]

2. common code in <mach/gpio.h> moved into <plat/gpio.h>, new processors
   should implement its own <mach/gpio.h>, provide the following required
   definitions and '#include <plat/gpio.h>' in the end:

   - GPIO_REGS_VIRT for mapped virtual address of the GPIO registers'
     physical I/O memory

   - macros of GPLR(), GPSR(), GPDR() for constant optimization for
     functions gpio_{set,get}_value() (so that bit-bang code can still
     have tolerable performance)

   - NR_BUILTIN_GPIO for the number of onchip GPIO

   - definitions of __gpio_is_inverted() and __gpio_is_occupied(), they
     can be either macros or inlined functions

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:33 +08:00
Eric Miao bd5ce43323 [ARM] pxa: introduce plat-pxa for PXA common code and add DMA support
1. introduce folder of 'arch/arm/plat-pxa' for common code across different
   PXA processor families

2. initially moved DMA code into plat-pxa

3. common code in <mach/dma.h> moved into <plat/dma.h>, new processors
   should implement its own <mach/dma.h>, provide the following required
   definitions and '#include <plat/dma.h>' in the end:

   - DMAC_REGS_VIRT for mapped virtual address of the DMA registers'
     physical I/O memory

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23 10:11:31 +08:00