Commit Graph

245 Commits

Author SHA1 Message Date
Olaf Hering 0728a2f99e [PATCH] powerpc: remove duplicate exports
A few symbols are exported twice, remove them from ppc_ksyms.c
Remove users of sys_ctrler in arch/ppc/

WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux
WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-20 10:44:31 +11:00
Paul Mackerras a7fdd90bc4 [PATCH] ppc: Remove powermac support from ARCH=ppc
This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 17:30:44 +11:00
Linus Torvalds 45bfe98bd7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge
Fix up delete/modify conflict of arch/ppc/kernel/process.c by hand (it's
gone, gone, gone).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 10:21:22 -08:00
Ingo Molnar 4dc7a0bbeb [PATCH] sched: add cacheflush() asm
Add per-arch sched_cacheflush() which is a write-back cacheflush used by
the migration-cost calibration code at bootup time.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:49 -08:00
Paul Mackerras 624cee31bc powerpc: make ARCH=ppc use arch/powerpc/kernel/process.c
Commit 5388fb1025 made signal_32.c
use discard_lazy_cpu_state, which broke ARCH=ppc because that
uses the common signal_32.c but has its own process.c.  Make ARCH=ppc
use the common process.c to fix this and to reduce the amount
of duplicated code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 21:22:34 +11:00
Benjamin Herrenschmidt f2c4583a38 [PATCH] powerpc: pci_address_to_pio fix
This fixes pci_address_to_pio() to return an unsigned long (to be safe)
and fixes a bug in the implementation that caused it to return a bogus
IO port number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:05:56 +11:00
Kumar Gala a819f8ba76 [PATCH] ppc32: Add TQM85xx (8540/8541/8555/8560) board support
This patch adds support for the TQ Components TQM85xx modules. Currently the
modules TQM8540/8541/8555/8560 are supported.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:53:08 +11:00
Benjamin Herrenschmidt d2dd482bc1 [PATCH] powerpc: Update OF address parsers
This updates the OF address parsers to return the IO flags
indicating the type of address obtained. It also adds a PCI
call for converting physical addresses that hit IO space into
into IO tokens, and add routines that return the translated
addresses into struct resource

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:51:26 +11:00
Benjamin Herrenschmidt 51d3082fe6 [PATCH] powerpc: Unify udbg (#2)
This patch unifies udbg for both ppc32 and ppc64 when building the
merged achitecture. xmon now has a single "back end". The powermac udbg
stuff gets enriched with some ADB capabilities and btext output. In
addition, the early_init callback is now called on ppc32 as well,
approx. in the same order as ppc64 regarding device-tree manipulations.
The init sequences of ppc32 and ppc64 are getting closer, I'll unify
them in a later patch.

For now, you can force udbg to the scc using "sccdbg" or to btext using
"btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg
output to something else than the autodetected OF output device in a
later patch.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:54 +11:00
Benjamin Herrenschmidt d1405b8698 [PATCH] powerpc: Add OF address parsing code (#2)
Parsing addresses extracted from Open Firmware isn't a simple matter. We
have various bits of code that try to do it in various place, including
some heuristics in prom.c that pre-parse addresses at boot and fill
device-nodes "addrs", but those are dodgy at best and I want to
deprecate them. So this patch introduces a new set of routines that
should be capable of parsing most types of addresses and translating
them into CPU physical addresses. It currently works for things on PCI
busses and ISA busses and should work on "standard" busses like the root
bus or the MacIO bus that don't put funky flags in addresses. If you
have other bus types that do use funky flags, you'll have to add new bus
type translators, which is fairly easy.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:46 +11:00
Paul Mackerras c1189c9275 ppc: remove duplicate bseip.h
include/asm-ppc/bseip.h is a duplicate of arch/ppc/platforms/bseip.h
and is not referenced anywhere, so get rid of it.  Pointed out by
Marcelo Tosatti.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:49:38 +11:00
Kumar Gala 1cd8e50620 [PATCH] powerpc: moved ipic code to arch/powerpc
Moved 83xx and QUICC Engine interrupt handling code into arch/powerpc
as a precursor of getting 83xx sub-arch building in arch/powerpc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:48:57 +11:00
Sylvain Munaut f80257a25d [PATCH] ppc32: Allows compilation of a MPC52xx kernel without PCI
Some custom cards might not need PCI, without this patch, compilation fails.

Signed-off-by: Roger Blofeld <blofeldus@yahoo.com>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:31 -08:00
Sylvain Munaut e21b9f2e9a [PATCH] ppc32: Modify Freescale MPC52xx IRQ mapping to _not_ use irq 0
AFAIK IRQ number 0 is a perfectly valid IRQ number.  But it seems there are
numerous places where it's considered to be invalid or "no irq" value.  Since
that value is problematic, the IRQ mapping is changed to not use it.

Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:31 -08:00
Eugene Surovegin fa57f9c2b8 [PATCH] ppc32: remove "jumbo" member from ocp_func_emac_data
Remove the not needed anymore "jumbo" member from ocp_func_emac_data.
Jumbo frame support is handled by PPC4xx EMAC driver internally now.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:30 -08:00
Al Viro 7c3dbbe982 [PATCH] ppc: ppc4xx_dma DMA_MODE_{READ,WRITE} fix
DMA_MODE_{READ,WRITE} are declared in asm-powerpc/dma.h and their
declarations there match the definitions.  Old declarations in
ppc4xx_dma.h are not right anymore (wrong type, to start with).
Killed them, added include of asm/dma.h where needed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-16 14:43:05 -08:00
Paul Mackerras 0e6850f615 Merge branch 'mymerge' of ssh://ozlabs.org/home/sfr/kernel-sfr 2005-11-19 14:25:23 +11:00
Vitaly Bordug 966cc04b4d [PATCH] ppc32: add missing define for fs_enet Ethernet driver
This adds the FCC_PSMR_RMII defenition, which is used in fs_enet to enable
RMII mode.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-18 07:49:45 -08:00
Stephen Rothwell 78b09735a2 powerpc: merge dma-mapping.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-19 01:48:52 +11:00
Stephen Rothwell 78baa2f8ad ppc32: move some dma routines
Every other architecture define dma_cache_{inv,wback,wback_inv}
in asm/io.h and doing so brings us closer to ppc64.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-19 01:48:33 +11:00
Kumar Gala 7486a38f68 [PATCH] powerpc: replace page_to_virt() with lowmem_page_address() for Book-E
page_to_virt and lowmem_page_address provided equiavlent functionality
so use the more standard lowmem_page_address

This also addresses build issue in ARCH=powerpc since page_to_virt()
has been removed from include/asm-powerpc/page.h

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 13:52:12 +11:00
Paul Mackerras c55377ee73 powerpc: Move a bunch of ppc64 headers to include/asm-powerpc
... and also delete some that are no longer used because we already
had an include/asm-powerpc version of the header.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 17:22:01 +11:00
Kumar Gala 4c8d3d997e [PATCH] Update email address for Kumar
Changed jobs and the Freescale address is no longer valid.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:10 -08:00
Benjamin Herrenschmidt a7f290dad3 [PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel
This patch moves the vdso's to arch/powerpc, adds support for the 32
bits vdso to the 32 bits kernel, rename systemcfg (finally !), and adds
some new (still untested) routines to both vdso's: clock_gettime() with
support for CLOCK_REALTIME and CLOCK_MONOTONIC, clock_getres() (same
clocks) and get_tbfreq() for glibc to retreive the timebase frequency.

Tom,Steve: The implementation of get_tbfreq() I've done for 32 bits
returns a long long (r3, r4) not a long. This is such that if we ever
add support for >4Ghz timebases on ppc32, the userland interface won't
have to change.

I have tested gettimeofday() using some glibc patches in both ppc32 and
ppc64 kernels using 32 bits userland (I haven't had a chance to test a
64 bits userland yet, but the implementation didn't change and was
tested earlier). I haven't tested yet the new functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 22:25:39 +11:00
David Gibson 26ef5c0957 [PATCH] powerpc: Merge cacheflush.h and cache.h
The ppc32 and ppc64 versions of cacheflush.h were almost identical.
The two versions of cache.h are fairly similar, except for a bunch of
register definitions in the ppc32 version which probably belong better
elsewhere.  This patch, therefore, merges both headers.  Notable
points:
	- there are several functions in cacheflush.h which exist only
on ppc32 or only on ppc64.  These are handled by #ifdef for now, but
these should probably be consolidated, along with the actual code
behind them later.
	- Confusingly, both ppc32 and ppc64 have a
flush_dcache_range(), but they're subtly different: it uses dcbf on
ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which
uses dcbf.  These too should be merged and consolidated later.
	- Also flush_dcache_range() was defined in cacheflush.h on
ppc64, and in cache.h on ppc32.  In the merged version it's in
cacheflush.h
	- On ppc32 flush_icache_range() is a normal function from
misc.S.  On ppc64, it was wrapper, testing a feature bit before
calling __flush_icache_range() which does the actual flush.  This
patch takes the ppc64 approach, which amounts to no change on ppc32,
since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean
renaming flush_icache_range() to __flush_icache_range() in
arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S
	- The PReP register info from asm-ppc/cache.h has moved to
arch/ppc/platforms/prep_setup.c
	- The 8xx register info from asm-ppc/cache.h has moved to a
new asm-powerpc/reg_8xx.h, included from reg.h
	- flush_dcache_all() was defined on ppc32 (only), but was
never called (although it was exported).  Thus this patch removes it
from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely.  It's
left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c.

Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP
ARCH=ppc, pmac and CHRP ARCH=powerpc).  Built and booted on POWER5
LPAR (ARCH=powerpc and ARCH=ppc64).

Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc).  Built and
booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64).  Built and booted
on G5 (ARCH=powerpc)

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 13:09:22 +11:00
David Gibson 584224e409 [PATCH] powerpc: Merge current.h
This patch merges current.h.  This is a one-big-ifdef merge, but both
versions are so tiny, I think we can live with it.  While we're at it,
we get rid of the fairly pointless redirection through get_current()
in the ppc64 version.

Built and booted on POWER5 LPAR (ARCH=powerpc & ARCH=ppc64).  Built
for 32-bit pmac (ARCH=powerpc & ARCH=ppc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:23:53 +11:00
David Gibson c5ff700116 [PATCH] powerpc: Merge signal.h
Having already merged the ppc and ppc64 versions of signal.c, this
patch finishes the job by merging signal.h.  The two versions were
almost identical already.  Notable changes:
	- We use BITS_PER_LONG to correctly size sigset_t
	- Remove some uneeded #includes and struct forward
declarations.  This does mean adding an include to signal_32.c which
relied on the indirect inclusion of sigcontext.h
	- As the ppc64 version, the merged signal.h has prototypes for
do_signal() and do_signal32().  Thus remove extra prototypes from
ppc_ksyms.c which had them directly.

Built and booted on POWER5 LPAR (ARCH=ppc64 and ARCH=powerpc).  Built
for 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc).

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 11:23:46 +11:00
Kumar Gala 78b331213e [PATCH] ppc32: Update MPC834x platform to work with new phylib
MPC834x uses the gianfar network driver which now uses the new phylib.  We
need to update the platform code to create a gianfar platform MDIO bus and
pass the right intializations to the gianfar driver to make things work
again.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:52 -08:00
Stephen Rothwell b354cab076 powerpc: merge ide.h
This is very simple with it being almost all ppc32 with just a couple
of common defines.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 12:20:34 +11:00
Benjamin Herrenschmidt 7b007de8a9 [PATCH] ppc: Fix ARCH=ppc build with xmon
xmon() prototype is inconsistent between ARCH=ppc and ARCH=powerpc,
thus causing ARCH=ppc build breakage.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:19:48 +11:00
Benjamin Herrenschmidt 21fe3301f1 [PATCH] ppc: fix a bunch of warnings
Building a PowerMac kernel with ARCH=powerpc causes a bunch of warnings,
this fixes some of them

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:19:36 +11:00
Benjamin Herrenschmidt 183d020258 [PATCH] ppc64: SMU partition recovery
This patch adds the ability to the SMU driver to recover missing
calibration partitions from the SMU chip itself. It also adds some
dynamic mecanism to /proc/device-tree so that new properties are visible
to userland.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:17:40 +11:00
Paul Mackerras 24bfb00123 Merge ../linux-2.6 2005-11-08 11:14:20 +11:00
Matt Porter 2b0c28d7f8 [PATCH] RapidIO support: ppc32
Adds PPC32 RIO support.  Init code for the MPC85xx RIO ports and glue for the
STx GP3 board to use it.

Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:47 -08:00
Tim Schmielau 8c65b4a604 [PATCH] fix remaining missing includes
Fix more include file problems that surfaced since I submitted the previous
fix-missing-includes.patch.  This should now allow not to include sched.h
from module.h, which is done by a followup patch.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:41 -08:00
Matt Porter 3e9e7c1d0b [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot
Cleanup PPC40x eval boards (bubinga, walnut and sycamore) to support U-Boot
as bootloader.  The OpenBIOS bd_info struct is not used in the kernel
anymore (only U-Boot now).

uImage (U-Boot) tested on walnut, sycamore and bubinga
zImage (OpenBIOS) tested on sycamore, bubinga and ebony

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier 90eb266584 [PATCH] ppc32: Add Yucca (440SPe eval board) platform
Add support for AMCC PowerPC 440SPe "Yucca" eval board platform.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier b0f7b8bc57 [PATCH] ppc32: Add 440SPe support
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root
port mode.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier 41aace4fe8 [PATCH] ppc32: Dump error status for both PLB segments on 440SP
The PowerPC 440SP SoC has two Processor Local Bus (PLB) segments (a
high-throughput segment and a low-latency segment).  Fix our PLB register
definitions to cope with this, and add code to dump the status of both
segments when a machine check occurs.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Roland Dreier fcc188e7fd [PATCH] ppc32: Allow ERPN for early serial to depend on CPU type
The PowerPC 440SPe supports up to 16 GB of RAM, and therefore its IO registers
are at 0x4_xxxx_xxxx instead of being at 0x1_xxxx_xxxx like most other PPC 440
chips.  To allow for this, this patch moves the definition of the ERPN used
for mapping UART0 from being hard-coded in the head_44x.S assembly code to
being defined in ibm44x.h.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Marcelo Tosatti 55b6332ec8 [PATCH] ppc32: handle access to non-present IO ports on 8xx
This adds exception table entries for I/O instructions on and
changes MachineCheckException() slightly to cover 8xx specifics (on
8xx the MCE can be generated while executing the IO access instruction
itself, which is not the case on PowerMac's, as the comment on traps.c
details).

Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 12:37:12 +11:00
Linus Torvalds 602d4a7e2f Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-merge 2005-11-04 16:27:50 -08:00
Paul Mackerras c3df69cd85 Merge git://oak/home/sfr/kernels/iseries/work 2005-11-04 17:03:39 +11:00
Stephen Rothwell 1970282f3b powerpc: merge tlbflush.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04 16:58:59 +11:00
Michael Ellerman dc3a9efb5e Merge with Paulus 2005-11-04 12:12:52 +11:00
Stephen Rothwell 9a0f78f63b powerpc: merge tlb.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04 10:20:27 +11:00
Paul Mackerras d3ab57ebdc Merge git://oak/home/sfr/kernels/iseries/work 2005-11-03 17:04:08 +11:00
Stephen Rothwell 5adb83c2fa powerpc: merge ucontext.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:59:17 +11:00
Marcelo Tosatti 38dc161864 [PATCH] ppc32 8xx: Fix harmless warning in 8xx_io/commproc.c
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03 16:57:07 +11:00
Stephen Rothwell 608f8b3cf3 powerpc: merge sigcontext.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:24:25 +11:00