Commit Graph

711 Commits

Author SHA1 Message Date
Al Viro 39429c5e4a new helper: ext2_image_size()
... implemented that way since the next commit will leave it
almost alone in ext2_fs.h - most of the file (including
struct ext2_super_block) is going to move to fs/ext2/ext2.h.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-31 16:03:16 -04:00
Bob Liu 5ddebe576c blackfin:dma: rename bfin_dma_5xx.c to bfin_dma.c
bfin_dma_5xx is not a generic name for all blackfin chips.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21 11:00:10 +08:00
David Howells 3bed8d6746 Disintegrate asm/system.h for Blackfin [ver #2]
Disintegrate asm/system.h for Blackfin.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: uclinux-dist-devel@blackfin.uclinux.org
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21 11:00:08 +08:00
Barry Song 4936afc651 blackfin: cplb-mpu: fix page mask table overflow
page mask table will overflow without xip related macros.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-21 11:00:06 +08:00
Thomas Gleixner bd2f55361f sched/rt: Use schedule_preempt_disabled()
Coccinelle based conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:28:03 +01:00
Bob Liu e6171bbe4d blackfin: time-ts: rm unused func broadcast_timer_setup()
broadcast_timer_setup() has no user now, drop it.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09 10:26:16 +08:00
Steven Miao 4dbeccdf7b bf54x: get mem size: missing break in switch
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09 10:26:15 +08:00
Bob Liu d0014be47d blackfin: smp: cleanup smp code
move idle task point to percpu blackfin_cpudata and add smp_timer_broadcast
interface.
enable SUPPLE_1_WAKEUP and add BFIN_IPI_TIMER ipi support.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-01-09 10:26:15 +08:00
Frederic Weisbecker 1268fbc746 nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()
Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.

Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:57 -08:00
Frederic Weisbecker 2bbb6817c0 nohz: Allow rcu extended quiescent state handling seperately from tick stop
It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:36 -08:00
Frederic Weisbecker 280f06774a nohz: Separate out irq exit and idle loop dyntick logic
The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:35 -08:00
Paul Gortmaker 8dc7a9c84f blackfin: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE
These particular files were just assuming that module.h was
somehow in the include paths.  Give them the more minimalist
header file explicitly.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:01 -04:00
Yong Zhang 7832bb5d45 Blackfin: irq: remove IRQF_DISABLED
This flag is a NOOP and can be removed now.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Bob Liu <lliubbo@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-26 04:22:26 -04:00
Sonic Zhang a9930fd234 Blackfin: kgdb_test: rework code to avoid -O0 usage
__kfree_rcu() in rcupdate.h bugs when parameter offset is not a constant
at compile time.  Since we build the kgdb_test module with -O0 and it
includes this header file, we hit the bug.  So drop the -O0 and mark the
one func we need for the test as noinline (so we can set a breakpoint on
it and have it be hit).

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-25 19:51:38 -04:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Jonas Bonn 66574cc054 modules: make arch's use default loader hooks
This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-24 22:06:04 +09:30
Mike Frysinger b0d3dc1291 Blackfin: bf526: restrict reboot workaround to 0.0 silicon
The bug in the BF526 rom when doing a software reset exists only in older
silicon versions, so don't clear SWRST on newer parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:33 -04:00
Mike Frysinger fdfb0becea Blackfin: bf54x: fix GPIO resume code
Back in commit c03c2a8734, we fixed logic in the non-bf54x
GPIO resume code to set the data levels properly before the direction
to avoid spurious line glitches.  But we missed the bf54x code paths.
So add the same fix there.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:32 -04:00
Mike Frysinger 9466a0510a Blackfin: bf538: pull gpio/port logic out of core hibernate paths
Re-architect how we save/restore the gpio/port logic that only pertains
to bf538/bf539 parts by pulling it out of the core code paths and pushing
it out to bf538-specific locations.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:30 -04:00
Mike Frysinger 0a7e5413ca Blackfin: debug-mmrs: generalize pint logic
Don't bind the code to specific CPU defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:26 -04:00
Mike Frysinger b69c920cb1 Blackfin: bf54x: tweak MMR pint names
The hardware block uses the name "request" rather than "irq", so update
the struct accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:25 -04:00
Mike Frysinger 006669ec21 Blackfin: pwm: implement linux/pwm.h API
For now, this only supports gptimers.  Support for dedicated PWM devices
as found on newer parts to come.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:23 -04:00
Steven Miao 353470cc50 Blackfin: make sure percpu section is aligned in XIP builds
The alignment is normally handled by PERCPU(), but we need to do it
ourselves in the XIP build due to the custom layout.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:22 -04:00
Mike Frysinger 997f95e190 Blackfin: gptimers: use bfin read/write helpers
Use proper helper macros for reading/writing the MMRs rather than
volatile markings on the struct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:21 -04:00
Mike Frysinger 24a6b91f69 Blackfin: gptimers: use register structs from common header
Now that asm/gptimers.h has the hardware register struct layout, there's
no need to duplicate things locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:21 -04:00
Mike Frysinger af459864b3 Blackfin: debug-mmrs: use new gptimer_group layout to simplify code
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:20 -04:00
Mike Frysinger 94674b15df Blackfin: debug-mmrs: prevent macro arg from expanding
Passing a non-simple expression in as the addr arg could incorrectly
apply the pointer cast resulting in misbehavior.  Add proper paren.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:20 -04:00
Mathias Krause a64b384818 Blackfin: exec: remove redundant set_fs(USER_DS)
The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:18 -04:00
Mike Frysinger e14062563c Blackfin: debug-mmrs: disable PERIPHERAL_MAP for IMDMA channels
The documentation for the IMDMA channels appears to be incorrect.
These DMA blocks don't actually have PERIPHERAL_MAP MMRs for us
to access.  Attempts to do so lead to system mmr hardware errors.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:18:17 -04:00
Mike Frysinger ef0531b2e4 Blackfin: debug-mmrs: fix typo in single dmac setup
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:44 -04:00
Mike Frysinger fb1d9be596 Blackfin: optimize double fault boot checking
This moves the double fault data used at boot time into a single struct
which can then easily be addressed with indexed loads rather than having
to explicitly load multiple addresses.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:43 -04:00
Mike Frysinger 072a5cff2f Blackfin: time: replace magic numbers with defines
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23 01:10:42 -04:00
Mike Frysinger c320afe965 Blackfin: debug-mmrs: include RSI_PID[4567] MMRs
The documentation is a little iffy as to whether these are actual MMRs,
but reading them on the hardware works, and the previous version of this
logic (the SDH) had PID[4567].  So add it for RSI too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger d09fb60203 Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi
This code was mostly developed against a BF54x, so some BF537-specific
issues were missed.

The PPI block starts at PPI_CONTROL, not PPI_STATUS (which is the reverse
of the EPPI block).

The MDMA block starts at MDMA_NEXT_DESC_PTR, not MDMA_CONFIG.  Seems the
sim does not catch misreads here so that'll need to get fixed.

The gptimer block is mostly 32bit regs, not 16bit.  Use the gptimer struct
to figure that out rather than hardcoding it locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-28 17:02:56 -04:00
Mike Frysinger d6cb2e3a8d Blackfin: use new common PERCPU_INPUT define
The Blackfin percpu input sections are outdated, so rather than update
them, drop them completely and use the new common define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:15 -04:00
Steven Miao f9691bb967 Blackfin: work around anomaly 05000480
Anomaly 05000480 on BF537 rev 0.0, 0.1, 0.2:
Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability

Suggested Workaround:
Program the DMA Traffic Control Period to a non-zero value.  This forces
the DMA block to group accesses together rather than allow arbitration for
each piece of data placed on the internal DMA bus.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:14 -04:00
Alexey Dobriyan 6362ec272c Blackfin: switch /proc/gpio to seq_file
->read_proc interface is going away, switch to seq_file.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:12 -04:00
KOSAKI Motohiro fecedc8071 Blackfin: convert old cpumask API to new one
old cpu_xxx() APIs is planned to removed later. then, converted.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:11 -04:00
KOSAKI Motohiro e887eb61e5 Blackfin: don't touch task->cpus_allowed directly
Every callter (except kthread_bind) should use proper
set_cpus_allowed_ptr() APIs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:10 -04:00
Mike Frysinger 7db7917290 Blackfin: initial perf_event support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:09 -04:00
Mike Frysinger 803103925b Blackfin: use on-chip reset func with newer parts
Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset.  So when the on-chip rom has a
functioning reset helper, use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 00b5c50e47 Blackfin: optimize MMR reads during startup a bit
Since the value of these MMRs aren't changing, store the value in a local
variable and work off of that.  This avoids multiple MMR reads which are
implicitly forced by the volatile markings.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 8c05410350 Blackfin: bf537: demux port H mask A and emac rx ints
The BF537 SIC combines the gpio port H mask A interrupts with the
emac rx interrupt, so we need to demux this in software.

It also combines the gpio port H mask B and the emac tx interrupts,
and the watchdog and port F mask B interrupts, but since we don't
support mask B yet, just add the defines for now.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 6327a574f9 Blackfin: move internal irq prototypes out of global namespace
These are only used in a few internal Blackfin places, so move the irq
prototypes out of the global header and into the internal irq one.  No
functional changes other than shuffling locales.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:43 -04:00
Mike Frysinger 3086fd2768 Blackfin: bf51x/bf52x: fix typo in hysteresis MMR names
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 2951acba85 Blackfin: SMP: drop unused blackfin_cpudata.idle pointer
Not sure when we stopped using this field, but nothing in the tree uses
this now, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 44491fbc5a Blackfin: SMP: fix cpudata cache setup
After some cache setup reordering changesets, the blackfin_cpudata init
was left behind.  While cpu0's data was correct, cpu1's data was not.
Not that big of a deal as these are only used in the cpuinfo output, but
should still be fixed.  So move the setup of these fields to the common
cache setup function to avoid this happening again in the future.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 8d011f70b0 Blackfin: clean up /proc/cpuinfo output
The smp flush lines are too long and have too many newlines, so scale
them back to match the other lines.

The %p modifier shows "(null)" for 0, so use %08x instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:42 -04:00
Mike Frysinger 73ecfcf908 Blackfin: first pass at debug mmr support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:13:41 -04:00
Linus Torvalds 5129df03d0 Merge branch 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Unify input section names
  percpu: Avoid extra NOP in percpu_cmpxchg16b_double
  percpu: Cast away printk format warning
  percpu: Always align percpu output section to PAGE_SIZE

Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
2011-05-24 11:53:42 -07:00