Commit Graph

80 Commits

Author SHA1 Message Date
Oleksandr Andrushchenko b3383974fe xen: Introduce shared buffer helpers for page directory...
based frontends. Currently the frontends which implement
similar code for sharing big buffers between frontend and
backend are para-virtualized DRM and sound drivers.
Both define the same way to share grant references of a
data buffer with the corresponding backend with little
differences.

Move shared code into a helper module, so there is a single
implementation of the same functionality for all.

This patch introduces code which is used by sound and display
frontend drivers without functional changes with the intention
to remove shared code from the corresponding drivers.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-12-18 12:15:55 -05:00
Bartlomiej Zolnierkiewicz f1db005048 xen: remove redundant 'default n' from Kconfig
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-10-24 11:29:33 +02:00
Geert Uytterhoeven af320de90e xen/balloon: Grammar s/Is it/It is/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-10-24 10:17:16 +02:00
Jason Andryuk ea9e57d06e xen: Make XEN_BACKEND selectable by DomU
XEN_BACKEND doesn't actually depend on XEN_DOM0.  DomUs can serve
backends to other DomUs.  One example is a service VM providing network
backends.

The original Kconfig defaulted Dom0 to y and it could be disabled.  DomU
could not select the option.  With the new Kconfig, we default y for
Dom0 and n for DomU.  Either can then toggle the selection.

Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-10-24 10:16:47 +02:00
Marek Marczykowski-Górecki 197ecb3802 xen/balloon: add runtime control for scrubbing ballooned out pages
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.

Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-09-14 08:51:10 -04:00
Oleksandr Andrushchenko 932d656217 xen/gntdev: Add initial support for dma-buf UAPI
Add UAPI and IOCTLs for dma-buf grant device driver extension:
the extension allows userspace processes and kernel modules to
use Xen backed dma-buf implementation. With this extension grant
references to the pages of an imported dma-buf can be exported
for other domain use and grant references coming from a foreign
domain can be converted into a local dma-buf for local export.
Implement basic initialization and stubs for Xen DMA buffers'
support.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26 23:05:14 -04:00
Oleksandr Andrushchenko 9bdc7304f5 xen/grant-table: Allow allocating buffers suitable for DMA
Extend grant table module API to allow allocating buffers that can
be used for DMA operations and mapping foreign grant references
on top of those.
The resulting buffer is similar to the one allocated by the balloon
driver in that proper memory reservation is made by
({increase|decrease}_reservation and VA mappings are updated if
needed).
This is useful for sharing foreign buffers with HW drivers which
cannot work with scattered buffers provided by the balloon driver,
but require DMAable memory instead.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-07-26 23:05:14 -04:00
Jan Beulich c4f9d9cb2c xen: XEN_ACPI_PROCESSOR is Dom0-only
Add a respective dependency.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-12-12 09:39:43 -05:00
Stefano Stabellini 5eee149ab9 xen: introduce a Kconfig option to enable the pvcalls frontend
Also add pvcalls-front to the Makefile.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-10-31 09:05:53 -04:00
Stefano Stabellini 42d3078a8a xen: introduce a Kconfig option to enable the pvcalls backend
Also add pvcalls-back to the Makefile.

Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-08-31 09:45:55 -04:00
Shannon Zhao be1aaf4e40 ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services
When running on Xen hypervisor, runtime services are supported through
hypercall. Add a Xen specific function to initialize runtime services.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-06 10:34:46 +01:00
Vitaly Kuznetsov 703fc13a3f xen_balloon: support memory auto onlining policy
Add support for the newly added kernel memory auto onlining policy to
Xen ballon driver.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Suggested-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 16:55:16 -07:00
Boris Ostrovsky 5f14154882 xen/PMU: Sysfs interface for setting Xen PMU mode
Set Xen's PMU mode via /sys/hypervisor/pmu/pmu_mode. Add XENPMU hypercall.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:26 +01:00
Boris Ostrovsky a11f4f0a4e xen: xensyms support
Export Xen symbols to dom0 via /proc/xen/xensyms (similar to
/proc/kallsyms).

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:25 +01:00
Linus Torvalds 836ee4874e Initial ACPI support for arm64:
This series introduces preliminary ACPI 5.1 support to the arm64 kernel
 using the "hardware reduced" profile. We don't support any peripherals
 yet, so it's fairly limited in scope:
 
 - Memory init (UEFI)
 - ACPI discovery (RSDP via UEFI)
 - CPU init (FADT)
 - GIC init (MADT)
 - SMP boot (MADT + PSCI)
 - ACPI Kconfig options (dependent on EXPERT)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJVNOC2AAoJELescNyEwWM08dIH/1Pn5xa04wwNDn0MOpbuQMk2
 kHM7hx69fbXflTJpnZRVyFBjRxxr5qilA7rljAFLnFeF8Fcll/s5VNy7ElHKLISq
 CB0ywgUfOd/sFJH57rcc67pC1b/XuqTbE1u1NFwvp2R3j1kGAEJWNA6SyxIP4bbc
 NO5jScx0lQOJ3rrPAXBW8qlGkeUk7TPOQJtMrpftNXlFLFrR63rPaEmMZ9dWepBF
 aRE4GXPvyUhpyv5o9RvlN5l8bQttiRJ3f9QjyG7NYhX0PXH3DyvGUzYlk2IoZtID
 v3ssCQH3uRsAZHIBhaTyNqFnUIaDR825bvGqyG/tj2Dt3kQZiF+QrfnU5D9TuMw=
 =zLJn
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull initial ACPI support for arm64 from Will Deacon:
 "This series introduces preliminary ACPI 5.1 support to the arm64
  kernel using the "hardware reduced" profile.  We don't support any
  peripherals yet, so it's fairly limited in scope:

   - MEMORY init (UEFI)

   - ACPI discovery (RSDP via UEFI)

   - CPU init (FADT)

   - GIC init (MADT)

   - SMP boot (MADT + PSCI)

   - ACPI Kconfig options (dependent on EXPERT)

  ACPI for arm64 has been in development for a while now and hardware
  has been available that can boot with either FDT or ACPI tables.  This
  has been made possible by both changes to the ACPI spec to cater for
  ARM-based machines (known as "hardware-reduced" in ACPI parlance) but
  also a Linaro-driven effort to get this supported on top of the Linux
  kernel.  This pull request is the result of that work.

  These changes allow us to initialise the CPUs, interrupt controller,
  and timers via ACPI tables, with memory information and cmdline coming
  from EFI.  We don't support a hybrid ACPI/FDT scheme.  Of course,
  there is still plenty of work to do (a serial console would be nice!)
  but I expect that to happen on a per-driver basis after this core
  series has been merged.

  Anyway, the diff stat here is fairly horrible, but splitting this up
  and merging it via all the different subsystems would have been
  extremely painful.  Instead, we've got all the relevant Acks in place
  and I've not seen anything other than trivial (Kconfig) conflicts in
  -next (for completeness, I've included my resolution below).  Nearly
  half of the insertions fall under Documentation/.

  So, we'll see how this goes.  Right now, it all depends on EXPERT and
  I fully expect people to use FDT by default for the immediate future"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits)
  ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function
  ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface()
  ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface
  ARM64: kernel: acpi: honour acpi=force command line parameter
  ARM64: kernel: acpi: refactor ACPI tables init and checks
  ARM64: kernel: psci: let ACPI probe PSCI version
  ARM64: kernel: psci: factor out probe function
  ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer
  ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed
  ARM64 / ACPI: additions of ACPI documentation for arm64
  Documentation: ACPI for ARM64
  ARM64 / ACPI: Enable ARM64 in Kconfig
  XEN / ACPI: Make XEN ACPI depend on X86
  ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64
  clocksource / arch_timer: Parse GTDT to initialize arch timer
  irqchip: Add GICv2 specific ACPI boot support
  ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi
  ACPI / processor: Make it possible to get CPU hardware ID via GICC
  ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID
  ARM64 / ACPI: Parse MADT for SMP initialization
  ...
2015-04-24 08:23:45 -07:00
Linus Torvalds 497a5df7bf xen: features and fixes for 4.1-rc0
- Use a single source list of hypercalls, generating other tables
   etc. at build time.
 - Add a "Xen PV" APIC driver to support >255 VCPUs in PV guests.
 - Significant performance improve to guest save/restore/migration.
 - scsiback/front save/restore support.
 - Infrastructure for multi-page xenbus rings.
 - Misc fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJVL6OZAAoJEFxbo/MsZsTRs3YH/2AycBHs129DNnc2OLmOklBz
 AdD43k+FOfZlv0YU80WmPVmOpGGHGB5Pqkix2KtnvPYmtx3pb/5ikhDwSTWZpqBl
 Qq6/RgsRjYZ8VMKqrMTkJMrJWHQYbg8lgsP5810nsFBn/Qdbxms+WBqpMkFVo3b2
 rvUZj8QijMJPS3qr55DklVaOlXV4+sTAytTdCiubVnaB/agM2jjRflp/lnJrhtTg
 yc4NTrIlD1RsMV/lNh92upBP/pCm6Bs0zQ2H1v3hkdhBBmaO0IVXpSheYhfDOHfo
 9v209n137N7X86CGWImFk6m2b+EfiFnLFir07zKSA+iZwkYKn75znSdPfj0KCc0=
 =bxTm
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-4.1-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen features and fixes from David Vrabel:

 - use a single source list of hypercalls, generating other tables etc.
   at build time.

 - add a "Xen PV" APIC driver to support >255 VCPUs in PV guests.

 - significant performance improve to guest save/restore/migration.

 - scsiback/front save/restore support.

 - infrastructure for multi-page xenbus rings.

 - misc fixes.

* tag 'stable/for-linus-4.1-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pci: Try harder to get PXM information for Xen
  xenbus_client: Extend interface to support multi-page ring
  xen-pciback: also support disabling of bus-mastering and memory-write-invalidate
  xen: support suspend/resume in pvscsi frontend
  xen: scsiback: add LUN of restored domain
  xen-scsiback: define a pr_fmt macro with xen-pvscsi
  xen/mce: fix up xen_late_init_mcelog() error handling
  xen/privcmd: improve performance of MMAPBATCH_V2
  xen: unify foreign GFN map/unmap for auto-xlated physmap guests
  x86/xen/apic: WARN with details.
  x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs
  xen/pciback: Don't print scary messages when unsupported by hypervisor.
  xen: use generated hypercall symbols in arch/x86/xen/xen-head.S
  xen: use generated hypervisor symbols in arch/x86/xen/trace.c
  xen: synchronize include/xen/interface/xen.h with xen
  xen: build infrastructure for generating hypercall depending symbols
  xen: balloon: Use static attribute groups for sysfs entries
  xen: pcpu: Use static attribute groups for sysfs entry
2015-04-16 14:01:03 -05:00
Hanjun Guo 42068cfd65 XEN / ACPI: Make XEN ACPI depend on X86
When ACPI is enabled on ARM64, XEN ACPI will also compiled
into the kernel, but XEN ACPI is x86 dependent, so introduce
CONFIG_XEN_ACPI to make it depend on x86 before XEN ACPI is
functional on ARM64.

CC: Julien Grall <julien.grall@linaro.org>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-26 15:13:08 +00:00
Juergen Gross 633d6f17cd x86/xen: prepare p2m list for memory hotplug
Commit 054954eb05 ("xen: switch to linear
virtual mapped sparse p2m list") introduced a regression regarding to
memory hotplug for a pv-domain: as the virtual space for the p2m list
is allocated for the to be expected memory size of the domain only,
hotplugged memory above that size will not be usable by the domain.

Correct this by using a configurable size for the p2m list in case of
memory hotplug enabled (default supported memory size is 512 GB for
64 bit domains and 4 GB for 32 bit domains).

Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org> # 3.19+
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-03-23 15:14:47 +00:00
David Vrabel 628c28eefd xen: unify foreign GFN map/unmap for auto-xlated physmap guests
Auto-translated physmap guests (arm, arm64 and x86 PVHVM/PVH) map and
unmap foreign GFNs using the same method (updating the physmap).
Unify the two arm and x86 implementations into one commont one.

Note that on arm and arm64, the correct error code will be returned
(instead of always -EFAULT) and map/unmap failure warnings are no
longer printed.  These changes are required if the foreign domain is
paging (-ENOENT failures are expected and must be propagated up to the
caller).

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-03-16 14:49:15 +00:00
Juergen Gross d9d660f6e5 xen-scsiback: Add Xen PV SCSI backend driver
Introduces the Xen pvSCSI backend. With pvSCSI it is possible for a
Xen domU to issue SCSI commands to a SCSI LUN assigned to that
domU. The SCSI commands are passed to the pvSCSI backend in a driver
domain (usually Dom0) which is owner of the physical device. This
allows e.g. to use SCSI tape drives in a Xen domU.

The code is taken from the pvSCSI implementation in Xen done by
Fujitsu based on Linux kernel 2.6.18.

Changes from the original version are:
- port to upstream kernel
- put all code in just one source file
- adapt to Linux style guide
- use target core infrastructure instead doing pure pass-through
- enable module unloading
- support SG-list in grant page(s)
- support task abort
- remove redundant struct backend
- allocate resources dynamically
- correct minor error in scsiback_fast_flush_area
- free allocated resources in case of error during I/O preparation
- remove CDB emulation, now handled by target core infrastructure

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-09-23 13:36:19 +00:00
Daniel Kiper be81c8a1da xen: Put EFI machinery in place
This patch enables EFI usage under Xen dom0. Standard EFI Linux
Kernel infrastructure cannot be used because it requires direct
access to EFI data and code. However, in dom0 case it is not possible
because above mentioned EFI stuff is fully owned and controlled
by Xen hypervisor. In this case all calls from dom0 to EFI must
be requested via special hypercall which in turn executes relevant
EFI code in behalf of dom0.

When dom0 kernel boots it checks for EFI availability on a machine.
If it is detected then artificial EFI system table is filled.
Native EFI callas are replaced by functions which mimics them
by calling relevant hypercall. Later pointer to EFI system table
is passed to standard EFI machinery and it continues EFI subsystem
initialization taking into account that there is no direct access
to EFI boot services, runtime, tables, structures, etc. After that
system runs as usual.

This patch is based on Jan Beulich and Tang Liang work.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Tang Liang <liang.tang@oracle.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-07-18 21:23:58 +01:00
Linus Torvalds 84621c9b18 Features:
- FIFO event channels. Key advantages: support for over 100,000 events (2^17),
    16 different event priorities, improved fairness in event latency through
    the use of FIFOs.
  - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized
    disk and network, paravirtualized interrupts and timers, no emulated devices
    of any kind (and thus no qemu), no BIOS or legacy boot — but instead of
    requiring PV MMU, it uses the HVM hardware extensions to virtualize the
    pagetables, as well as system calls and other privileged operations."
    (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum")
 Bug-fixes:
  - Fixes in balloon driver (refactor and make it work under ARM)
  - Allow xenfb to be used in HVM guests.
  - Allow xen_platform_pci=0 to work properly.
  - Refactors in event channels.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJS4BmLAAoJEFjIrFwIi8fJ4SAH/iNGESowgMhfW64vRA8pBWq+
 NRJpUjYjjwmbxpwoNl6NPwn15cIXFyc3sMtvvrDD3taRDyko2RFuT+NTjpO05xPh
 d/cRpRXpXERHoiFgPf/WTp7ONBDhvPtHG0+BzJKwgqEIOUYXdbhD+gEjaVlFJScS
 CAY68OLmk7XYMSZBNzPfKNbSCyhVgZF7wpaimK9lxZBKsFRCDIq6jIyrAsC8epIL
 6V/V4l2S6lk/uUeGB6ULphYeINjI2kkpbSfCd1vyenLfWpVscc2o8uWEYFcZMAxy
 V4HpsoseuqrfdDqgPfud3VgogdISvbkCvDfW85rzfDP4MWxei2mVHFtJ/gSBV+g=
 =ToNG
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull Xen updates from Konrad Rzeszutek Wilk:
 "Two major features that Xen community is excited about:

  The first is event channel scalability by David Vrabel - we switch
  over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO
  queue with priorities.  This lets us be able to handle more events,
  have lower latency, and better scalability.  Good stuff.

  The other is PVH by Mukesh Rathor.  In short, PV is a mode where the
  kernel lets the hypervisor program page-tables, segments, etc.  With
  EPT/NPT capabilities in current processors, the overhead of doing this
  in an HVM (Hardware Virtual Machine) container is much lower than the
  hypervisor doing it for us.

  In short we let a PV guest run without doing page-table, segment,
  syscall, etc updates through the hypervisor - instead it is all done
  within the guest container.  It is a "hybrid" PV - hence the 'PVH'
  name - a PV guest within an HVM container.

  The major benefits are less code to deal with - for example we only
  use one function from the the pv_mmu_ops (which has 39 function
  calls); faster performance for syscall (no context switches into the
  hypervisor); less traps on various operations; etc.

  It is still being baked - the ABI is not yet set in stone.  But it is
  pretty awesome and we are excited about it.

  Lastly, there are some changes to ARM code - you should get a simple
  conflict which has been resolved in #linux-next.

  In short, this pull has awesome features.

  Features:
   - FIFO event channels.  Key advantages: support for over 100,000
     events (2^17), 16 different event priorities, improved fairness in
     event latency through the use of FIFOs.
   - Xen PVH support.  "It’s a fully PV kernel mode, running with
     paravirtualized disk and network, paravirtualized interrupts and
     timers, no emulated devices of any kind (and thus no qemu), no BIOS
     or legacy boot — but instead of requiring PV MMU, it uses the HVM
     hardware extensions to virtualize the pagetables, as well as system
     calls and other privileged operations." (from "The
     Paravirtualization Spectrum, Part 2: From poles to a spectrum")

  Bug-fixes:
   - Fixes in balloon driver (refactor and make it work under ARM)
   - Allow xenfb to be used in HVM guests.
   - Allow xen_platform_pci=0 to work properly.
   - Refactors in event channels"

* tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits)
  xen/pvh: Set X86_CR0_WP and others in CR0 (v2)
  MAINTAINERS: add git repository for Xen
  xen/pvh: Use 'depend' instead of 'select'.
  xen: delete new instances of __cpuinit usage
  xen/fb: allow xenfb initialization for hvm guests
  xen/evtchn_fifo: fix error return code in evtchn_fifo_setup()
  xen-platform: fix error return code in platform_pci_init()
  xen/pvh: remove duplicated include from enlighten.c
  xen/pvh: Fix compile issues with xen_pvh_domain()
  xen: Use dev_is_pci() to check whether it is pci device
  xen/grant-table: Force to use v1 of grants.
  xen/pvh: Support ParaVirtualized Hardware extensions (v3).
  xen/pvh: Piggyback on PVHVM XenBus.
  xen/pvh: Piggyback on PVHVM for grant driver (v4)
  xen/grant: Implement an grant frame array struct (v3).
  xen/grant-table: Refactor gnttab_init
  xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init.
  xen/pvh: Piggyback on PVHVM for event channels (v2)
  xen/pvh: Update E820 to work with PVH (v2)
  xen/pvh: Secondary VCPU bringup (non-bootup CPUs)
  ...
2014-01-22 22:00:18 -08:00
Ian Campbell 72f28071f1 xen: balloon: enable for ARM
Since c275a57f5e "xen/balloon: Set balloon's initial state to number of
existing RAM pages" the balloon driver appears to work fine on ARM as far as I
can tell. Prior to that commit it was broken because on ARM RAM doesn't
typically start at zero, effectively leaving a big MMIO hole at the start.
This would cause the balloon driver to give away all of RAM at start of day,
which is rather inconvenient.

It was already enabled (or rather not excluded) on ARM64. The
c1d15f5c8b
"xen/balloon: Seperate the auto-translate logic properly (v2)"
added in the proper plumbing to work with ARM and PVH type guests.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
[v2: Added the bit about PVH]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-01-06 10:07:26 -05:00
Jiri Kosina e23c34bb41 Merge branch 'master' into for-next
Sync with Linus' tree to be able to apply fixes on top of newer things
in tree (efi-stub).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-19 15:08:32 +01:00
Masanari Iida 5065a706c1 treewide: Fix typo in Kconfig
Correct spelling typo in Kconfig.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-02 14:54:57 +01:00
Stefano Stabellini 83862ccfc0 xen/arm,arm64: enable SWIOTLB_XEN
Xen on arm and arm64 needs SWIOTLB_XEN: when running on Xen we need to
program the hardware with mfns rather than pfns for dma addresses.
Remove SWIOTLB_XEN dependency on X86 and PCI and make XEN select
SWIOTLB_XEN on arm and arm64.

At the moment always rely on swiotlb-xen, but when Xen starts supporting
hardware IOMMUs we'll be able to avoid it conditionally on the presence
of an IOMMU on the platform.

Implement xen_create_contiguous_region on arm and arm64: for the moment
we assume that dom0 has been mapped 1:1 (physical addresses == machine
addresses) therefore we don't need to call XENMEM_exchange. Simply
return the physical address as dma address.

Initialize the xen-swiotlb from xen_early_init (before the native
dma_ops are initialized), set xen_dma_ops to &xen_swiotlb_dma_ops.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>


Changes in v8:
- assume dom0 is mapped 1:1, no need to call XENMEM_exchange.

Changes in v7:
- call __set_phys_to_machine_multi from xen_create_contiguous_region and
xen_destroy_contiguous_region to update the P2M;
- don't call XENMEM_unpin, it has been removed;
- call XENMEM_exchange instead of XENMEM_exchange_and_pin;
- set nr_exchanged to 0 before calling the hypercall.

Changes in v6:
- introduce and export xen_dma_ops;
- call xen_mm_init from as arch_initcall.

Changes in v4:
- remove redefinition of DMA_ERROR_CODE;
- update the code to use XENMEM_exchange_and_pin and XENMEM_unpin;
- add a note about hardware IOMMU in the commit message.

Changes in v3:
- code style changes;
- warn on XENMEM_put_dma_buf failures.
2013-10-10 13:40:44 +00:00
Stefano Stabellini 741ddbcfd2 xen/tmem: do not allow XEN_TMEM on ARM64
tmem is not supported on arm or arm64 yet. Will revert this
once the Xen hypervisor supports it.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-07-30 13:44:02 -04:00
Konrad Rzeszutek Wilk ed4f346a00 xen/tmem: Remove the usage of '[no|]selfballoon' and use 'tmem.selfballooning' bool instead.
As the 'tmem' driver is the one that actually sets whether
it will use it (or not) so might as well make tmem responsible
for this knob.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15 10:27:49 -04:00
Konrad Rzeszutek Wilk 54598d1b03 xen/tmem: Remove the usage of 'noselfshrink' and use 'tmem.selfshrink' bool instead.
As the 'tmem' driver is the one that actually sets whether
it will use it or not so might as well make tmem responsible
for this knob.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-15 10:27:48 -04:00
Linus Torvalds 607eeb0b83 Bug-fixes:
- More fixes in the vCPU PVHVM hotplug path.
  - Add more documentation.
  - Fix various ARM related issues in the Xen generic drivers.
  - Updates in the xen-pciback driver per Bjorn's updates.
  - Mask the x2APIC feature for PV guests.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQEcBAABAgAGBQJRjPL5AAoJEFjIrFwIi8fJdlIIANXawH+B+aFbqsFSKOOh76XN
 smgICU78SVzKpW9WAPYK7YFqSdNN4AleGC2Mn2lSkiaqgciRyDb9Yt+OSMMts2Xn
 ZVbFkGhEKR+DtZfTKo9YgsGatul/McTiVEkuuli+aN5dql3WXDLAaA+/b9bO3ohh
 TCWtWNuSCGmlfDoJET2je+J6CgKvCErH3fvzKNxgYxytcGhAvxoVK/lC4d3pnq/m
 wQUAIcF8XYENqC2m1WDR0OGveAB0Me0j9g+UkQS+TzqA8GPmxC4aptjkroFYhOz6
 8nZp+LanimmTI6olVioWEXkCr5+dxb058jQKwncQfonFpl58RS0qUrz5zoe3etU=
 =h9SX
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - More fixes in the vCPU PVHVM hotplug path.
 - Add more documentation.
 - Fix various ARM related issues in the Xen generic drivers.
 - Updates in the xen-pciback driver per Bjorn's updates.
 - Mask the x2APIC feature for PV guests.

* tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pci: Used cached MSI-X capability offset
  xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK
  xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST
  xen: mask x2APIC feature in PV
  xen: SWIOTLB is only used on x86
  xen/spinlock: Fix check from greater than to be also be greater or equal to.
  xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info
  xen/vcpu: Document the xen_vcpu_info and xen_vcpu
  xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
2013-05-11 16:19:30 -07:00
Arnd Bergmann e8b404d993 xen: SWIOTLB is only used on x86
Enabling SWIOTLB_XEN on ARM results in build errors because the
underlying SWIOTLB is only available on X86:

drivers/xen/swiotlb-xen.c: In function 'is_xen_swiotlb_buffer':
drivers/xen/swiotlb-xen.c:105:2: error: implicit declaration of function 'mfn_to_local_pfn

Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-08 08:38:10 -04:00
Dan Magenheimer 10a7a07713 xen: tmem: enable Xen tmem shim to be built/loaded as a module
Allow Xen tmem shim to be built/loaded as a module.  Xen self-ballooning
and frontswap-selfshrinking are now also "lazily" initialized when the
Xen tmem shim is loaded as a module, unless explicitly disabled by
module parameters.

Note runtime dependency disallows loading if cleancache/frontswap lazy
initialization patches are not present.

If built-in (not built as a module), the original mechanism of enabling
via a kernel boot parameter is retained, but this should be considered
deprecated.

Note that module unload is explicitly not yet supported.

[v1: Removed the [CLEANCACHE|FRONTSWAP]_HAS_LAZY_INIT ifdef]
[v2: Squashed the xen/tmem: Remove the subsys call patch in]
[akpm@linux-foundation.org: fix build (disable_frontswap_selfshrinking undeclared)]
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andor Daam <andor.daam@googlemail.com>
Cc: Florian Schmaus <fschmaus@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:01 -07:00
Konrad Rzeszutek Wilk 76fc253723 xen/acpi-stub: Disable it b/c the acpi_processor_add is no longer called.
With the Xen ACPI stub code (CONFIG_XEN_STUB=y) enabled, the power
C and P states are no longer uploaded to the hypervisor.

The reason is that the Xen CPU hotplug code: xen-acpi-cpuhotplug.c
and the xen-acpi-stub.c register themselves as the "processor" type object.

That means the generic processor (processor_driver.c) stops
working and it does not call (acpi_processor_add) which populates the

         per_cpu(processors, pr->id) = pr;

structure. The 'pr' is gathered from the acpi_processor_get_info function
which does the job of finding the C-states and figuring out PBLK address.

The 'processors->pr' is then later used by xen-acpi-processor.c (the one that
uploads C and P states to the hypervisor). Since it is NULL, we end
skip the gathering of _PSD, _PSS, _PCT, etc and never upload the power
management data.

The end result is that enabling the CONFIG_XEN_STUB in the build means that
xen-acpi-processor is not working anymore.

This temporary patch fixes it by marking the XEN_STUB driver as
BROKEN until this can be properly fixed.

CC: jinsong.liu@intel.com
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-27 12:06:02 -04:00
Liu Jinsong 39adc483d3 xen/acpi: ACPI cpu hotplug
This patch implement real Xen ACPI cpu hotplug driver as module.
When loaded, it replaces Xen stub driver.

For booting existed cpus, the driver enumerates them.
For hotadded cpus, which added at runtime and notify OS via
device or container event, the driver is invoked to add them,
parsing cpu information, hypercalling to Xen hypervisor to add
them, and finally setting up new /sys interface for them.

Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19 22:02:29 -05:00
Liu Jinsong ef92e7caf9 xen/acpi: ACPI memory hotplug
This patch implements real Xen acpi memory hotplug driver as module.
When loaded, it replaces Xen stub driver.

When an acpi memory device hotadd event occurs, it notifies OS and
invokes notification callback, adding related memory device and parsing
memory information, finally hypercall to xen hypervisor to add memory.

Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19 22:02:26 -05:00
Liu Jinsong dcb93b96ce xen/stub: driver for memory hotplug
This patch create a file (xen-stub.c) for Xen stub drivers.
Xen stub drivers are used to reserve space for Xen drivers, i.e.
memory hotplug and cpu hotplug, and to block native drivers loaded,
so that real Xen drivers can be modular and loaded on demand.

This patch is specific for Xen memory hotplug (other Xen logic
can add stub drivers on their own). The xen stub driver will
occupied earlier via subsys_initcall (than native memory hotplug
driver via module_init and so blocking native). Later real Xen
memory hotplug logic will unregister the stub driver and register
itself to take effect on demand.

Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19 22:02:25 -05:00
Ian Campbell c2374bf57e xen: balloon: allow PVMMU interfaces to be compiled out
The ARM platform has no concept of PVMMU and therefor no
HYPERVISOR_update_va_mapping et al. Allow this code to be compiled out
when not required.

In some similar situations (e.g. P2M) we have defined dummy functions
to avoid this, however I think we can/should draw the line at dummying
out actual hypercalls.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-29 12:59:13 +00:00
Arnd Bergmann f880b67dcb ARM: Xen: fix initial build problems
* The XEN_BALLOON code requires the balloon infrastructure that is not
  getting built on ARM.

* The tmem hypercall is not available on ARM

* ARMv6 does not support cmpxchg on 16-bit words that are used in the
  Xen grant table code, so we must ensure that Xen support is only
  built on ARMv7-only kernels not combined ARMv6/v7 kernels.

* sys-hypervisor.c needs to include linux/err.h in order to use the
  IS_ERR/PTR_ERR/ERR_PTR family of functions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
2012-10-09 20:29:01 +02:00
Liu, Jinsong cef12ee52b xen/mce: Add mcelog support for Xen platform
When MCA error occurs, it would be handled by Xen hypervisor first,
and then the error information would be sent to initial domain for logging.

This patch gets error information from Xen hypervisor and convert
Xen format error into Linux format mcelog. This logic is basically
self-contained, not touching other kernel components.

By using tools like mcelog tool users could read specific error information,
like what they did under native Linux.

To test follow directions outlined in Documentation/acpi/apei/einj.txt

Acked-and-tested-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Ke, Liping <liping.ke@intel.com>
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-07-19 15:51:36 -04:00
Linus Torvalds e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Andrew Morton 1fd1443229 xen/Kconfig: fix Kconfig layout
Fit it into 80 columns so that it is readable in menuconfig.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-05-07 12:26:28 -04:00
Masanari Iida 6b2aac42b2 Fix typo in various Kconfig file
Correct spelling typo in various Kconfig file.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:40:08 +02:00
Konrad Rzeszutek Wilk df7a3ee29b xen/acpi: Fix Kconfig dependency on CPU_FREQ
The functions: "acpi_processor_*" sound like they depend on CONFIG_ACPI_PROCESSOR
but in reality they are exposed when CONFIG_CPU_FREQ=[y|m]. As such
update the Kconfig to have this dependency and fix compile issues:

ERROR: "acpi_processor_unregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_notify_smm" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_register_performance" [drivers/xen/xen-acpi-processor.ko] undefined!
ERROR: "acpi_processor_preregister_performance" [drivers/xen/xen-acpi-processor.ko] undefined!

Note: We still need the CONFIG_ACPI
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-24 09:23:06 -04:00
Konrad Rzeszutek Wilk 102b208e6b xen/acpi-processor: Do not depend on CPU frequency scaling drivers.
With patch "xen/cpufreq: Disable the cpu frequency scaling drivers
from loading." we do not have to worry about said drivers loading
themselves before the xen-acpi-processor driver. Hence we can remove
the default selection (=y if CPU frequency drivers were built-in, or
=m if CPU frequency drivers were built as modules), and just
select =m for the default case.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-20 15:33:53 -04:00
Konrad Rzeszutek Wilk 59a5680291 xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.
This driver solves three problems:
 1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the
     hypervisor - aka P-states (cpufreq data).
 2). Upload the the Cx state information (cpuidle data).
 3). Inhibit CPU frequency scaling drivers from loading.

The reason for wanting to solve 1) and 2) is such that the Xen hypervisor
is the only one that knows the CPU usage of different guests and can
make the proper decision of when to put CPUs and packages in proper states.
Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it
needs help from the initial domain to provide this information. The reason
for 3) is that we do not want the initial domain to change P-states while the
hypervisor is doing it as well - it causes rather some funny cases of P-states
transitions.

For this to work, the driver parses the Power Management data and uploads said
information to the Xen hypervisor. It also calls acpi_processor_notify_smm()
to inhibit the other CPU frequency scaling drivers from being loaded.

Everything revolves around the 'struct acpi_processor' structure which
gets updated during the bootup cycle in different stages. At the startup, when
the ACPI parser starts, the C-state information is processed (processor_idle)
and saved in said structure as 'power' element. Later on, the CPU frequency
scaling driver (powernow-k8 or acpi_cpufreq), would call the the
acpi_processor_* (processor_perflib functions) to parse P-states information
and populate in the said structure the 'performance' element.

Since we do not want the CPU frequency scaling drivers from loading
we have to call the acpi_processor_* functions to parse the P-states and
call "acpi_processor_notify_smm" to stop them from loading.

There is also one oddity in this driver which is that under Xen, the
physical online CPU count can be different from the virtual online CPU count.
Meaning that the macros 'for_[online|possible]_cpu' would process only
up to virtual online CPU count. We on the other hand want to process
the full amount of physical CPUs. For that, the driver checks if the ACPI IDs
count is different from the APIC ID count - which can happen if the user
choose to use dom0_max_vcpu argument. In such a case a backup of the PM
structure is used and uploaded to the hypervisor.

[v1-v2: Initial RFC implementations that were posted]
[v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>]
[v4: Added vCPU != pCPU support - aka dom0_max_vcpus support]
[v5: Cleaned up the driver, fix bug under Athlon XP]
[v6: Changed the driver to a CPU frequency governor]
[v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver
     made me rework it as driver that inhibits cpufreq scaling driver]
[v8: Per Jan's review comments, fixed up the driver]
[v9: Allow to continue even if acpi_processor_preregister_perf.. fails]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-14 12:35:42 -04:00
Bastian Blank d8414d3c15 xen: Add privcmd device driver
Access to arbitrary hypercalls is currently provided via xenfs. This
adds a standard character device to handle this. The support in xenfs
remains for backward compatibility and uses the device driver code.

Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-12-16 13:29:31 -05:00
Stefano Stabellini 5fbdc10395 xen: remove XEN_PLATFORM_PCI config option
Xen PVHVM needs xen-platform-pci, on the other hand xen-platform-pci is
useless in any other cases.
Therefore remove the XEN_PLATFORM_PCI config option and compile
xen-platform-pci built-in if XEN_PVHVM is selected.

Changes to v1:

- remove xen-platform-pci.o and just use platform-pci.o since it is not
externally visible anymore.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-29 10:52:16 -04:00
Konrad Rzeszutek Wilk 65d4b24811 xen/self-balloon: Add dependency on tmem.
Without enabling CONFIG_XEN_TMEM we get this:

drivers/xen/xen-selfballoon.c:461: undefined reference to `tmem_enabled'

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-03 14:34:57 -04:00
Daniel Kiper 080e2be788 xen/balloon: memory hotplug support for Xen balloon driver
Memory hotplug support for Xen balloon driver.  It should be mentioned
that hotplugged memory is not onlined automatically.  It should be onlined
by user through standard sysfs interface.

Memory could be hotplugged in following steps:

  1) dom0: xl mem-max <domU> <maxmem>
     where <maxmem> is >= requested memory size,

  2) dom0: xl mem-set <domU> <memory>
     where <memory> is requested memory size; alternatively memory
     could be added by writing proper value to
     /sys/devices/system/xen_memory/xen_memory0/target or
     /sys/devices/system/xen_memory/xen_memory0/target_kb on dumU,

  3) domU: for i in /sys/devices/system/memory/memory*/state; do \
             [ "`cat "$i"`" = offline ] && echo online > "$i"; done

Memory could be onlined automatically on domU by adding following line to
udev rules:

  SUBSYSTEM=="memory", ACTION=="add", RUN+="/bin/sh -c '[ -f /sys$devpath/state ] && echo online > /sys$devpath/state'"

In that case step 3 should be omitted.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:08 -07:00
Konrad Rzeszutek Wilk 3a6d28b11a Merge branch 'stable/xen-pciback-0.6.3' into stable/drivers
* stable/xen-pciback-0.6.3:
  xen/pciback: Have 'passthrough' option instead of XEN_PCIDEV_BACKEND_PASS and XEN_PCIDEV_BACKEND_VPCI
  xen/pciback: Remove the DEBUG option.
  xen/pciback: Drop two backends, squash and cleanup some code.
  xen/pciback: Print out the MSI/MSI-X (PIRQ) values
  xen/pciback: Don't setup an fake IRQ handler for SR-IOV devices.
  xen: rename pciback module to xen-pciback.
  xen/pciback: Fine-grain the spinlocks and fix BUG: scheduling while atomic cases.
  xen/pciback: Allocate IRQ handler for device that is shared with guest.
  xen/pciback: Disable MSI/MSI-X when reseting a device
  xen/pciback: guest SR-IOV support for PV guest
  xen/pciback: Register the owner (domain) of the PCI device.
  xen/pciback: Cleanup the driver based on checkpatch warnings and errors.
  xen/pciback: xen pci backend driver.

Conflicts:
	drivers/xen/Kconfig
2011-07-20 15:33:51 -04:00