Commit Graph

17094 Commits

Author SHA1 Message Date
Linus Torvalds 1840897ab5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits)
  b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd
  mac80211: fix failure to check kmalloc return value in key_key_read
  libertas: Fix sd8686 firmware reload
  ath9k: Fix incorrect access of rate flags in RC
  netfilter: xt_socket: Make tproto signed in socket_mt6_v1().
  stmmac: enable/disable rx/tx in the core with a single write.
  net: atarilance - flags should be unsigned long
  netxen: fix kdump
  pktgen: Limit how much data we copy onto the stack.
  net: Limit socket I/O iovec total length to INT_MAX.
  USB: gadget: fix ethernet gadget crash in gether_setup
  fib: Fix fib zone and its hash leak on namespace stop
  cxgb3: Fix panic in free_tx_desc()
  cxgb3: fix crash due to manipulating queues before registration
  8390: Don't oops on starting dev queue
  dccp ccid-2: Stop polling
  dccp: Refine the wait-for-ccid mechanism
  dccp: Extend CCID packet dequeueing interface
  dccp: Return-value convention of hc_tx_send_packet()
  igbvf: fix panic on load
  ...
2010-10-29 14:17:12 -07:00
David S. Miller a4765fa7bf Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-10-29 12:23:15 -07:00
Jesper Juhl 520efd1ace mac80211: fix failure to check kmalloc return value in key_key_read
I noticed two small issues in mac80211/debugfs_key.c::key_key_read while
reading through the code. Patch below.

The key_key_read() function returns ssize_t and the value that's actually
returned is the return value of simple_read_from_buffer() which also
returns ssize_t, so let's hold the return value in a ssize_t local
variable rather than a int one.

Also, memory is allocated dynamically with kmalloc() which can fail, but
the return value of kmalloc() is not checked, so we may end up operating
on a null pointer further on. So check for a NULL return and bail out with
-ENOMEM in that case.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-29 14:33:26 -04:00
Al Viro 51139adac9 convert get_sb_pseudo() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:33 -04:00
Al Viro fc14f2fef6 convert get_sb_single() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:28 -04:00
David S. Miller 089282fb02 netfilter: xt_socket: Make tproto signed in socket_mt6_v1().
Otherwise error indications from ipv6_find_hdr() won't be noticed.

This required making the protocol argument to extract_icmp6_fields()
signed too.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 12:59:53 -07:00
Nelson Elhage 448d7b5daf pktgen: Limit how much data we copy onto the stack.
A program that accidentally writes too much data to the pktgen file can overflow
the kernel stack and oops the machine. This is only triggerable by root, so
there's no security issue, but it's still an unfortunate bug.

printk() won't print more than 1024 bytes in a single call, anyways, so let's
just never copy more than that much data. We're on a fairly shallow stack, so
that should be safe even with CONFIG_4KSTACKS.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 11:47:53 -07:00
David S. Miller 8acfe468b0 net: Limit socket I/O iovec total length to INT_MAX.
This helps protect us from overflow issues down in the
individual protocol sendmsg/recvmsg handlers.  Once
we hit INT_MAX we truncate out the rest of the iovec
by setting the iov_len members to zero.

This works because:

1) For SOCK_STREAM and SOCK_SEQPACKET sockets, partial
   writes are allowed and the application will just continue
   with another write to send the rest of the data.

2) For datagram oriented sockets, where there must be a
   one-to-one correspondance between write() calls and
   packets on the wire, INT_MAX is going to be far larger
   than the packet size limit the protocol is going to
   check for and signal with -EMSGSIZE.

Based upon a patch by Linus Torvalds.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 11:47:52 -07:00
Pavel Emelyanov 4aa2c466a7 fib: Fix fib zone and its hash leak on namespace stop
When we stop a namespace we flush the table and free one, but the
added fn_zone-s (and their hashes if grown) are leaked. Need to free.
Tries releases all its stuff in the flushing code.

Shame on us - this bug exists since the very first make-fib-per-net
patches in 2.6.27 :(

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 10:27:03 -07:00
Gerrit Renker 1c0e0a0569 dccp ccid-2: Stop polling
This updates CCID-2 to use the CCID dequeuing mechanism, converting from
previous continuous-polling to a now event-driven mechanism.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 10:27:01 -07:00
Gerrit Renker b1fcf55eea dccp: Refine the wait-for-ccid mechanism
This extends the existing wait-for-ccid routine so that it may be used with
different types of CCID, addressing the following problems:

 1) The queue-drain mechanism only works with rate-based CCIDs. If CCID-2 for
    example has a full TX queue and becomes network-limited just as the
    application wants to close, then waiting for CCID-2 to become unblocked
    could lead to an indefinite  delay (i.e., application "hangs").
 2) Since each TX CCID in turn uses a feedback mechanism, there may be changes
    in its sending policy while the queue is being drained. This can lead to
    further delays during which the application will not be able to terminate.
 3) The minimum wait time for CCID-3/4 can be expected to be the queue length
    times the current inter-packet delay. For example if tx_qlen=100 and a delay
    of 15 ms is used for each packet, then the application would have to wait
    for a minimum of 1.5 seconds before being allowed to exit.
 4) There is no way for the user/application to control this behaviour. It would
    be good to use the timeout argument of dccp_close() as an upper bound. Then
    the maximum time that an application is willing to wait for its CCIDs to can
    be set via the SO_LINGER option.

These problems are addressed by giving the CCID a grace period of up to the
`timeout' value.

The wait-for-ccid function is, as before, used when the application
 (a) has read all the data in its receive buffer and
 (b) if SO_LINGER was set with a non-zero linger time, or
 (c) the socket is either in the OPEN (active close) or in the PASSIVE_CLOSEREQ
     state (client application closes after receiving CloseReq).

In addition, there is a catch-all case of __skb_queue_purge() after waiting for
the CCID. This is necessary since the write queue may still have data when
 (a) the host has been passively-closed,
 (b) abnormal termination (unread data, zero linger time),
 (c) wait-for-ccid could not finish within the given time limit.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 10:27:01 -07:00
Gerrit Renker dc841e30ea dccp: Extend CCID packet dequeueing interface
This extends the packet dequeuing interface of dccp_write_xmit() to allow
 1. CCIDs to take care of timing when the next packet may be sent;
 2. delayed sending (as before, with an inter-packet gap up to 65.535 seconds).

The main purpose is to take CCID-2 out of its polling mode (when it is network-
limited, it tries every millisecond to send, without interruption).

The mode of operation for (2) is as follows:
 * new packet is enqueued via dccp_sendmsg() => dccp_write_xmit(),
 * ccid_hc_tx_send_packet() detects that it may not send (e.g. window full),
 * it signals this condition via `CCID_PACKET_WILL_DEQUEUE_LATER',
 * dccp_write_xmit() returns without further action;
 * after some time the wait-condition for CCID becomes true,
 * that CCID schedules the tasklet,
 * tasklet function calls ccid_hc_tx_send_packet() via dccp_write_xmit(),
 * since the wait-condition is now true, ccid_hc_tx_packet() returns "send now",
 * packet is sent, and possibly more (since dccp_write_xmit() loops).

Code reuse: the taskled function calls dccp_write_xmit(), the timer function
            reduces to a wrapper around the same code.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 10:27:00 -07:00
Gerrit Renker fe84f4140f dccp: Return-value convention of hc_tx_send_packet()
This patch reorganises the return value convention of the CCID TX sending
function, to permit more flexible schemes, as required by subsequent patches.

Currently the convention is
 * values < 0     mean error,
 * a value == 0   means "send now", and
 * a value x > 0  means "send in x milliseconds".

The patch provides symbolic constants and a function to interpret return values.

In addition, it caps the maximum positive return value to 0xFFFF milliseconds,
corresponding to 65.535 seconds.  This is possible since in CCID-3/4 the
maximum possible inter-packet gap is fixed at t_mbi = 64 sec.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28 10:27:00 -07:00
Sanchit Garg f6ac55b6c1 net/9p: Return error on read with NULL buffer
This patch ensures that a read(fd, NULL, 10) returns  EFAULT on a 9p file.

Signed-off-by: Sanchit Garg <sancgarg@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:49 -05:00
Venkateswararao Jujjuri (JV) b165d60145 9p: Add datasync to client side TFSYNC/RFSYNC for dotl
SYNOPSIS
    size[4] Tfsync tag[2] fid[4] datasync[4]

    size[4] Rfsync tag[2]

DESCRIPTION

    The Tfsync transaction transfers ("flushes") all modified in-core data of
    file identified by fid to the disk device (or other  permanent  storage
    device)  where that  file  resides.

    If datasync flag is specified data will be fleshed but does not flush
    modified metadata unless  that  metadata  is  needed  in order to allow a
    subsequent data retrieval to be correctly handled.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:49 -05:00
Aneesh Kumar K.V 7b3bb3fe16 net/9p: Return error if we fail to encode protocol data
We need to return error in case we fail to encode data in protocol buffer.
This patch also return error in case of a failed copy_from_user.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:49 -05:00
Venkateswararao Jujjuri (JV) 52f44e0d08 net/9p: Add waitq to VirtIO transport.
If there is not enough space for the PDU on the VirtIO ring, current
code returns -EIO propagating the error to user.

This patch introduced a wqit_queue on the channel, and lets the process
wait on this queue until VirtIO ring frees up.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:48 -05:00
Venkateswararao Jujjuri (JV) 419b39561e [net/9p]Serialize virtqueue operations to make VirtIO transport SMP safe.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:48 -05:00
M. Mohan Kumar 329176cc2c 9p: Implement TREADLINK operation for 9p2000.L
Synopsis

	size[4] TReadlink tag[2] fid[4]
	size[4] RReadlink tag[2] target[s]

Description
	Readlink is used to return the contents of the symoblic link
        referred by fid. Contents of symboic link is returned as a
        response.

	target[s] - Contents of the symbolic link referred by fid.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:48 -05:00
M. Mohan Kumar 1d769cd192 9p: Implement TGETLOCK
Synopsis

    size[4] TGetlock tag[2] fid[4] getlock[n]
    size[4] RGetlock tag[2] getlock[n]

Description

TGetlock is used to test for the existence of byte range posix locks on a file
identified by given fid. The reply contains getlock structure. If the lock could
be placed it returns F_UNLCK in type field of getlock structure.  Otherwise it
returns the details of the conflicting locks in the getlock structure

    getlock structure:
      type[1] - Type of lock: F_RDLCK, F_WRLCK
      start[8] - Starting offset for lock
      length[8] - Number of bytes to check for the lock
             If length is 0, check for lock in all bytes starting at the location
            'start' through to the end of file
      pid[4] - PID of the process that wants to take lock/owns the task
               in case of reply
      client[4] - Client id of the system that owns the process which
                  has the conflicting lock

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:47 -05:00
M. Mohan Kumar a099027c77 9p: Implement TLOCK
Synopsis

    size[4] TLock tag[2] fid[4] flock[n]
    size[4] RLock tag[2] status[1]

Description

Tlock is used to acquire/release byte range posix locks on a file
identified by given fid. The reply contains status of the lock request

    flock structure:
        type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK
        flags[4] - Flags could be either of
          P9_LOCK_FLAGS_BLOCK - Blocked lock request, if there is a
            conflicting lock exists, wait for that lock to be released.
          P9_LOCK_FLAGS_RECLAIM - Reclaim lock request, used when client is
            trying to reclaim a lock after a server restrart (due to crash)
        start[8] - Starting offset for lock
        length[8] - Number of bytes to lock
          If length is 0, lock all bytes starting at the location 'start'
          through to the end of file
        pid[4] - PID of the process that wants to take lock
        client_id[4] - Unique client id

        status[1] - Status of the lock request, can be
          P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or
          P9_LOCK_GRACE(3)
          P9_LOCK_SUCCESS - Request was successful
          P9_LOCK_BLOCKED - A conflicting lock is held by another process
          P9_LOCK_ERROR - Error while processing the lock request
          P9_LOCK_GRACE - Server is in grace period, it can't accept new lock
            requests in this period (except locks with
            P9_LOCK_FLAGS_RECLAIM flag set)

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:47 -05:00
Venkateswararao Jujjuri (JV) 920e65dc69 [9p] Introduce client side TFSYNC/RFSYNC for dotl.
SYNOPSIS
    size[4] Tfsync tag[2] fid[4]

    size[4] Rfsync tag[2]

DESCRIPTION

The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other  permanent  storage
device)  where that  file  resides.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:47 -05:00
jvrao 8e44a0805f net/9p: Add a Warning to catch NULL fids passed to p9_client_clunk().
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:45 -05:00
Arun R Bharadwaj 4f7ebe8072 net/9p: This patch implements TLERROR/RLERROR on the 9P client.
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28 09:08:45 -05:00
Linus Torvalds 22cdbd1d57 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits)
  ehea: Fixing statistics
  bonding: Fix lockdep warning after bond_vlan_rx_register()
  tunnels: Fix tunnels change rcu protection
  caif-u5500: Build config for CAIF shared mem driver
  caif-u5500: CAIF shared memory mailbox interface
  caif-u5500: CAIF shared memory transport protocol
  caif-u5500: Adding shared memory include
  drivers/isdn: delete double assignment
  drivers/net/typhoon.c: delete double assignment
  drivers/net/sb1000.c: delete double assignment
  qlcnic: define valid vlan id range
  qlcnic: reduce rx ring size
  qlcnic: fix mac learning
  ehea: fix use after free
  inetpeer: __rcu annotations
  fib_rules: __rcu annotates ctarget
  tunnels: add __rcu annotations
  net: add __rcu annotations to protocol
  ipv4: add __rcu annotations to routes.c
  qlge: bugfix: Restoring the vlan setting.
  ...
2010-10-27 18:28:00 -07:00
Pavel Emelyanov 74b0b85b88 tunnels: Fix tunnels change rcu protection
After making rcu protection for tunnels (ipip, gre, sit and ip6) a bug
was introduced into the SIOCCHGTUNNEL code.

The tunnel is first unlinked, then addresses change, then it is linked
back probably into another bucket. But while changing the parms, the
hash table is unlocked to readers and they can lookup the improper tunnel.

Respective commits are b7285b79 (ipip: get rid of ipip_lock), 1507850b
(gre: get rid of ipgre_lock), 3a43be3c (sit: get rid of ipip6_lock) and
94767632 (ip6tnl: get rid of ip6_tnl_lock).

The quick fix is to wait for quiescent state to pass after unlinking,
but if it is inappropriate I can invent something better, just let me
know.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 14:20:08 -07:00
Jouni Malinen dc9f48ce7c mac80211: Fix scan_ies_len to include DS Params
Commit 651b52254f added DS Parameter Set
information into Probe Request frames that are transmitted on 2.4 GHz
band, but it failed to increment local->scan_ies_len to cover this new
information. This variable needs to be updated to match the maximum IE
data length so that the extra buffer need gets reduced from the driver
limit.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-27 15:46:51 -04:00
Eric Dumazet b914c4ea92 inetpeer: __rcu annotations
Adds __rcu annotations to inetpeer
	(struct inet_peer)->avl_left
	(struct inet_peer)->avl_right

This is a tedious cleanup, but removes one smp_wmb() from link_to_pool()
since we now use more self documenting rcu_assign_pointer().

Note the use of RCU_INIT_POINTER() instead of rcu_assign_pointer() in
all cases we dont need a memory barrier.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:33 -07:00
Eric Dumazet 7a2b03c517 fib_rules: __rcu annotates ctarget
Adds __rcu annotation to (struct fib_rule)->ctarget

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:32 -07:00
Eric Dumazet b33eab0844 tunnels: add __rcu annotations
Add __rcu annotations to :
        (struct ip_tunnel)->prl
        (struct ip_tunnel_prl_entry)->next
        (struct xfrm_tunnel)->next
	struct xfrm_tunnel *tunnel4_handlers
	struct xfrm_tunnel *tunnel64_handlers

And use appropriate rcu primitives to reduce sparse warnings if
CONFIG_SPARSE_RCU_POINTER=y

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:32 -07:00
Eric Dumazet e0ad61ec86 net: add __rcu annotations to protocol
Add __rcu annotations to :
        struct net_protocol *inet_protos
        struct net_protocol *inet6_protos

And use appropriate casts to reduce sparse warnings if
CONFIG_SPARSE_RCU_POINTER=y

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:31 -07:00
Eric Dumazet 1c31720a74 ipv4: add __rcu annotations to routes.c
Add __rcu annotations to :
        (struct dst_entry)->rt_next
        (struct rt_hash_bucket)->chain

And use appropriate rcu primitives to reduce sparse warnings if
CONFIG_SPARSE_RCU_POINTER=y

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:31 -07:00
Ursula Braun 853dc2e03d ipv6: fix refcnt problem related to POSTDAD state
After running this bonding setup script
    modprobe bonding miimon=100 mode=0 max_bonds=1
    ifconfig bond0 10.1.1.1/16
    ifenslave bond0 eth1
    ifenslave bond0 eth3
on s390 with qeth-driven slaves, modprobe -r fails with this message
    unregister_netdevice: waiting for bond0 to become free. Usage count = 1
due to twice detection of duplicate address.
Problem is caused by a missing decrease of ifp->refcnt in addrconf_dad_failure.
An extra call of in6_ifa_put(ifp) solves it.
Problem has been introduced with commit f2344a131b.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:30 -07:00
Ben Hutchings 66c68bcc48 net: NETIF_F_HW_CSUM does not imply FCoE CRC offload
NETIF_F_HW_CSUM indicates the ability to update an TCP/IP-style 16-bit
checksum with the checksum of an arbitrary part of the packet data,
whereas the FCoE CRC is something entirely different.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Cc: stable@kernel.org [2.6.32+]
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:29 -07:00
Ben Hutchings af1905dbec net: Fix some corner cases in dev_can_checksum()
dev_can_checksum() incorrectly returns true in these cases:

1. The skb has both out-of-band and in-band VLAN tags and the device
   supports checksum offload for the encapsulated protocol but only with
   one layer of encapsulation.
2. The skb has a VLAN tag and the device supports generic checksumming
   but not in conjunction with VLAN encapsulation.

Rearrange the VLAN tag checks to avoid these.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-27 11:37:29 -07:00
Linus Torvalds 426e1f5cec Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
  split invalidate_inodes()
  fs: skip I_FREEING inodes in writeback_sb_inodes
  fs: fold invalidate_list into invalidate_inodes
  fs: do not drop inode_lock in dispose_list
  fs: inode split IO and LRU lists
  fs: switch bdev inode bdi's correctly
  fs: fix buffer invalidation in invalidate_list
  fsnotify: use dget_parent
  smbfs: use dget_parent
  exportfs: use dget_parent
  fs: use RCU read side protection in d_validate
  fs: clean up dentry lru modification
  fs: split __shrink_dcache_sb
  fs: improve DCACHE_REFERENCED usage
  fs: use percpu counter for nr_dentry and nr_dentry_unused
  fs: simplify __d_free
  fs: take dcache_lock inside __d_path
  fs: do not assign default i_ino in new_inode
  fs: introduce a per-cpu last_ino allocator
  new helper: ihold()
  ...
2010-10-26 17:58:44 -07:00
Eric Dumazet 518de9b39e fs: allow for more than 2^31 files
Robin Holt tried to boot a 16TB system and found af_unix was overflowing
a 32bit value :

<quote>

We were seeing a failure which prevented boot.  The kernel was incapable
of creating either a named pipe or unix domain socket.  This comes down
to a common kernel function called unix_create1() which does:

        atomic_inc(&unix_nr_socks);
        if (atomic_read(&unix_nr_socks) > 2 * get_max_files())
                goto out;

The function get_max_files() is a simple return of files_stat.max_files.
files_stat.max_files is a signed integer and is computed in
fs/file_table.c's files_init().

        n = (mempages * (PAGE_SIZE / 1024)) / 10;
        files_stat.max_files = n;

In our case, mempages (total_ram_pages) is approx 3,758,096,384
(0xe0000000).  That leaves max_files at approximately 1,503,238,553.
This causes 2 * get_max_files() to integer overflow.

</quote>

Fix is to let /proc/sys/fs/file-nr & /proc/sys/fs/file-max use long
integers, and change af_unix to use an atomic_long_t instead of atomic_t.

get_max_files() is changed to return an unsigned long.  get_nr_files() is
changed to return a long.

unix_nr_socks is changed from atomic_t to atomic_long_t, while not
strictly needed to address Robin problem.

Before patch (on a 64bit kernel) :
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
-18446744071562067968

After patch:
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
2147483648
# cat /proc/sys/fs/file-nr
704     0       2147483648

Reported-by: Robin Holt <holt@sgi.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Reviewed-by: Robin Holt <holt@sgi.com>
Tested-by: Robin Holt <holt@sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:15 -07:00
Glenn Wurster 7a876b0efc IPv6: Temp addresses are immediately deleted.
There is a bug in the interaction between ipv6_create_tempaddr and
addrconf_verify.  Because ipv6_create_tempaddr uses the cstamp and tstamp
from the public address in creating a private address, if we have not
received a router advertisement in a while, tstamp + temp_valid_lft might be
< now.  If this happens, the new address is created inside
ipv6_create_tempaddr, then the loop within addrconf_verify starts again and
the address is immediately deleted.  We are left with no temporary addresses
on the interface, and no more will be created until the public IP address is
updated.  To avoid this, set the expiry time to be the minimum of the time
left on the public address or the config option PLUS the current age of the
public interface.

Signed-off-by: Glenn Wurster <gwurster@scs.carleton.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26 12:35:13 -07:00
Glenn Wurster aed65501e8 IPv6: Create temporary address if none exists.
If privacy extentions are enabled, but no current temporary address exists,
then create one when we get a router advertisement.

Signed-off-by: Glenn Wurster <gwurster@scs.carleton.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26 12:35:12 -07:00
Eric Dumazet ded85aa86b fib_hash: fix rcu sparse and logical errors
While fixing CONFIG_SPARSE_RCU_POINTER errors, I had to fix accesses to
fz->fz_hash for real.

-	&fz->fz_hash[fn_hash(f->fn_key, fz)]
+	rcu_dereference(fz->fz_hash) + fn_hash(f->fn_key, fz)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26 11:42:39 -07:00
Eric Dumazet ebb9fed2de fib: fix fib_nl_newrule()
Some panic reports in fib_rules_lookup() show a rule could have a NULL
pointer as a next pointer in the rules_list.

This can actually happen because of a bug in fib_nl_newrule() : It
checks if current rule is the destination of unresolved gotos. (Other
rules have gotos to this about to be inserted rule)

Problem is it does the resolution of the gotos before the rule is
inserted in the rules_list (and has a valid next pointer)

Fix this by moving the rules_list insertion before the changes on gotos.

A lockless reader can not any more follow a ctarget pointer, unless
destination is ready (has a valid next pointer)

Reported-by: Oleg A. Arkhangelsky <sysoleg@yandex.ru>
Reported-by: Joe Buehler <aspam@cox.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26 11:42:38 -07:00
David S. Miller 78fd9c4491 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2010-10-26 11:32:28 -07:00
Linus Torvalds 4390110fef Merge branch 'for-2.6.37' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
  svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
  svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
  svcrpc: assume svc_delete_xprt() called only once
  svcrpc: never clear XPT_BUSY on dead xprt
  nfsd4: fix connection allocation in sequence()
  nfsd4: only require krb5 principal for NFSv4.0 callbacks
  nfsd4: move minorversion to client
  nfsd4: delay session removal till free_client
  nfsd4: separate callback change and callback probe
  nfsd4: callback program number is per-session
  nfsd4: track backchannel connections
  nfsd4: confirm only on succesful create_session
  nfsd4: make backchannel sequence number per-session
  nfsd4: use client pointer to backchannel session
  nfsd4: move callback setup into session init code
  nfsd4: don't cache seq_misordered replies
  SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
  SUNRPC: Use conventional switch statement when reclassifying sockets
  sunrpc/xprtrdma: clean up workqueue usage
  sunrpc: Turn list_for_each-s into the ..._entry-s
  ...

Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
2010-10-26 09:55:25 -07:00
Linus Torvalds a4dd8dce14 Merge branch 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  net/sunrpc: Use static const char arrays
  nfs4: fix channel attribute sanity-checks
  NFSv4.1: Use more sensible names for 'initialize_mountpoint'
  NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
  NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
  NFS: client needs to maintain list of inodes with active layouts
  NFS: create and destroy inode's layout cache
  NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
  NFSv4.1: pnfs: full mount/umount infrastructure
  NFS: set layout driver
  NFS: ask for layouttypes during v4 fsinfo call
  NFS: change stateid to be a union
  NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
  SUNRPC: define xdr_decode_opaque_fixed
  NFSD: remove duplicate NFS4_STATEID_SIZE
2010-10-26 09:52:09 -07:00
David S. Miller 7932c2e55c netfilter: Add missing CONFIG_SYSCTL checks in ipv6's nf_conntrack_reasm.c
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-26 09:08:53 -07:00
Joe Perches 411b5e0561 net/sunrpc: Use static const char arrays
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-10-25 22:19:52 -04:00
Christoph Hellwig 85fe4025c6 fs: do not assign default i_ino in new_inode
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves.  For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Al Viro 7de9c6ee3e new helper: ihold()
Clones an existing reference to inode; caller must already hold one.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Eric Dumazet 7e360c38ab fs: allow for more than 2^31 files
Andrew,

Could you please review this patch, you probably are the right guy to
take it, because it crosses fs and net trees.

Note : /proc/sys/fs/file-nr is a read-only file, so this patch doesnt
depend on previous patch (sysctl: fix min/max handling in
__do_proc_doulongvec_minmax())

Thanks !

[PATCH V4] fs: allow for more than 2^31 files

Robin Holt tried to boot a 16TB system and found af_unix was overflowing
a 32bit value :

<quote>

We were seeing a failure which prevented boot.  The kernel was incapable
of creating either a named pipe or unix domain socket.  This comes down
to a common kernel function called unix_create1() which does:

        atomic_inc(&unix_nr_socks);
        if (atomic_read(&unix_nr_socks) > 2 * get_max_files())
                goto out;

The function get_max_files() is a simple return of files_stat.max_files.
files_stat.max_files is a signed integer and is computed in
fs/file_table.c's files_init().

        n = (mempages * (PAGE_SIZE / 1024)) / 10;
        files_stat.max_files = n;

In our case, mempages (total_ram_pages) is approx 3,758,096,384
(0xe0000000).  That leaves max_files at approximately 1,503,238,553.
This causes 2 * get_max_files() to integer overflow.

</quote>

Fix is to let /proc/sys/fs/file-nr & /proc/sys/fs/file-max use long
integers, and change af_unix to use an atomic_long_t instead of
atomic_t.

get_max_files() is changed to return an unsigned long.
get_nr_files() is changed to return a long.

unix_nr_socks is changed from atomic_t to atomic_long_t, while not
strictly needed to address Robin problem.

Before patch (on a 64bit kernel) :
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
-18446744071562067968

After patch:
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
2147483648
# cat /proc/sys/fs/file-nr
704     0       2147483648

Reported-by: Robin Holt <holt@sgi.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Reviewed-by: Robin Holt <holt@sgi.com>
Tested-by: Robin Holt <holt@sgi.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:18:20 -04:00
J. Bruce Fields 42d7ba3d6d svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
The only caller (svc_send) has already checked XPT_DEAD.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-10-25 17:59:34 -04:00