Commit Graph

2852 Commits

Author SHA1 Message Date
Rafael J. Wysocki 0b68c8e2c3 PCI: EHCI: Fix crash during hibernation on ASUS computers
Commit dbf0e4c (PCI: EHCI: fix crash during suspend on ASUS
computers) added a workaround for an ASUS suspend issue related to
USB EHCI and a bug in a number of ASUS BIOSes that attempt to shut
down the EHCI controller during system suspend if its PCI command
register doesn't contain 0 at that time.

It turns out that the same workaround is necessary in the analogous
hibernation code path, so add it.

References: https://bugzilla.kernel.org/show_bug.cgi?id=45811
Reported-and-tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
2012-08-15 11:51:19 -06:00
Rafael J. Wysocki 3d0882c0d1 PCI / PM: Fix D3/D3cold/D4 messages printed by acpi_pci_set_power_state()
If a PCI device is put into D3_cold by acpi_bus_set_power(),
the message printed by acpi_pci_set_power_state() says that its
power state has been changed to D4, which doesn't make sense.
In turn, if the device is put into D3_hot, the message simply
says "D3" without specifying the variant of the D3 state.

Fix this by using the pci_power_name() macro for printing the state
name instead of building it from the numeric value corresponding to
the given state directly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-15 11:46:18 -06:00
Linus Torvalds 6dd53aa456 PCI changes for the 3.6 merge window:
Host bridge hotplug
     - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
   Device hotplug
     - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
     - Call FINAL fixups for hot-added devices, too (Myron Stowe)
     - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
     - Remove all functions in a slot, not just those with _EJx (Amos Kong)
   Dynamic resource management
     - Track bus number allocation (struct resource tree per domain) (Yinghai Lu)
     - Make P2P bridge 1K I/O windows work with resource reassignment (Bjorn Helgaas, Yinghai Lu)
     - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
   Power management
     - Add PCIe runtime D3cold support (Huang Ying)
   Virtualization
     - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex Williamson)
     - Add quirks for devices with broken INTx masking (Jan Kiszka)
   Miscellaneous
     - Fix some PCI Express capability version issues (Myron Stowe)
     - Factor out some arch code with a weak, generic, pcibios_setup() (Myron Stowe)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQBy+9AAoJEPGMOI97Hn6zOpQP+wVFvA7pcteFj6HPs5nTq2Hc
 55oeRqCO0wBHoFMCKB0AjeTATjqxi9OhcjaiVrZejxNyWKC9MnrXuunpQ0l/hCbR
 M/TK+BCelfX2FU4eXNf+TBCCcOhOVWqQft9Gm6nYKwX8Y0msRVCceI4WwhZgSwtI
 vdtmnqlwolscdnq+8ThsnvUMtwkN0gExmn2FJRl6EoEgG0DTqhMkZ83uA+NPBhvv
 I+g0XbA6haaZph2nnSYR0hIW4Q7JkT/LgA6uVAQxamctwxLol7xxsjCRnfqrulkf
 kaRr2fAgBXfmaOIltro4UkXrCM52ZSyggCDfExHp6mWGPKMjE5ZcyK1YbGfmmumk
 DS3t1S0eBdDJXrnf9l/Yb8e95dQxRCYKelKzr1rTD9QAXsInE8rC40hvhfFaTa4s
 nZYRTz0SKv6coQihqaOR7shx1DNomLFk7jndaWEElfl9/cT/nQnZ8XLfVMzkJNNB
 Y4SM6zkiIaCL0aiSEE16MqVjmODYRjbURLYzQIrqr2KJQg8X6XjIRojQLjL6xEgA
 22ry2ZRPhqO68g7aLqvixiSDaTp0Z0Vw+JmgjtBqvkokwZcGQtm4umkpAdOi+Es8
 3bJaMY7ZUpDX53FE8iyP6AnmR/1k19rC1gNnNq/syWyjtYOYJ9i3QCTafFgvE1VC
 5coQ1L5tByHvpzK5PHwf
 =oo/A
 -----END PGP SIGNATURE-----

Merge tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug:
    - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
  Device hotplug:
    - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
    - Call FINAL fixups for hot-added devices, too (Myron Stowe)
    - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
    - Remove all functions in a slot, not just those with _EJx (Amos
      Kong)
  Dynamic resource management:
    - Track bus number allocation (struct resource tree per domain)
      (Yinghai Lu)
    - Make P2P bridge 1K I/O windows work with resource reassignment
      (Bjorn Helgaas, Yinghai Lu)
    - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
  Power management:
    - Add PCIe runtime D3cold support (Huang Ying)
  Virtualization:
    - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex
      Williamson)
    - Add quirks for devices with broken INTx masking (Jan Kiszka)
  Miscellaneous:
    - Fix some PCI Express capability version issues (Myron Stowe)
    - Factor out some arch code with a weak, generic, pcibios_setup()
      (Myron Stowe)"

* tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits)
  PCI: hotplug: ensure a consistent return value in error case
  PCI: fix undefined reference to 'pci_fixup_final_inited'
  PCI: build resource code for M68K architecture
  PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
  PCI: reorder __pci_assign_resource() (no change)
  PCI: fix truncation of resource size to 32 bits
  PCI: acpiphp: merge acpiphp_debug and debug
  PCI: acpiphp: remove unused res_lock
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: call final fixups hot-added devices
  PCI: move final fixups from __init to __devinit
  x86/PCI: move final fixups from __init to __devinit
  MIPS/PCI: move final fixups from __init to __devinit
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
  PCI: never discard enable/suspend/resume_early/resume fixups
  PCI: release temporary reference in __nv_msi_ht_cap_quirk()
  PCI: restructure 'pci_do_fixups()'
  ...
2012-07-24 16:17:07 -07:00
Linus Torvalds d14b7a419a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
 "Trivial updates all over the place as usual."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
  Fix typo in include/linux/clk.h .
  pci: hotplug: Fix typo in pci
  iommu: Fix typo in iommu
  video: Fix typo in drivers/video
  Documentation: Add newline at end-of-file to files lacking one
  arm,unicore32: Remove obsolete "select MISC_DEVICES"
  module.c: spelling s/postition/position/g
  cpufreq: Fix typo in cpufreq driver
  trivial: typo in comment in mksysmap
  mach-omap2: Fix typo in debug message and comment
  scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
  Change email address for Steve Glendinning
  Btrfs: fix typo in convert_extent_bit
  via: Remove bogus if check
  netprio_cgroup.c: fix comment typo
  backlight: fix memory leak on obscure error path
  Documentation: asus-laptop.txt references an obsolete Kconfig item
  Documentation: ManagementStyle: fixed typo
  mm/vmscan: cleanup comment error in balance_pgdat
  mm: cleanup on the comments of zone_reclaim_stat
  ...
2012-07-24 13:34:56 -07:00
Masanari Iida 367fa9821a pci: hotplug: Fix typo in pci
Correct spelling typo in drivers/pci/hotplug.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-24 12:59:30 +02:00
Linus Torvalds f0a08fcb59 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile updates from Chris Metcalf:
 "These changes provide support for PCIe root complex and USB host mode
  for tilegx's on-chip I/Os.

  In addition, this pull provides the required underpinning for the
  on-chip networking support that was pulled into 3.5.  The changes have
  all been through LKML (with several rounds for PCIe RC) and on
  linux-next."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: updates to pci root complex from community feedback
  bounce: allow use of bounce pool via config option
  usb: add host support for the tilegx architecture
  arch/tile: provide kernel support for the tilegx USB shim
  tile pci: enable IOMMU to support DMA for legacy devices
  arch/tile: enable ZONE_DMA for tilegx
  tilegx pci: support I/O to arbitrarily-cached pages
  tile: remove unused header
  arch/tile: tilegx PCI root complex support
  arch/tile: provide kernel support for the tilegx TRIO shim
  arch/tile: break out the "csum a long" function to <asm/checksum.h>
  arch/tile: provide kernel support for the tilegx mPIPE shim
  arch/tile: common DMA code for the GXIO IORPC subsystem
  arch/tile: support MMIO-based readb/writeb etc.
  arch/tile: introduce GXIO IORPC framework for tilegx
2012-07-23 19:10:54 -07:00
Chris Metcalf 129622672d arch/tile: tilegx PCI root complex support
This change implements PCIe root complex support for tilegx using
the kernel support layer for accessing the TRIO hardware shim.

Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> [changes in 07487f3]
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18 16:39:11 -04:00
Bjorn Helgaas 63b96f7bae Merge branch 'pci/yinghai-pciehp-unused' into next
* pci/yinghai-pciehp-unused:
  PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
2012-07-18 14:08:22 -06:00
Bjorn Helgaas 5f9dca9669 Merge branch 'pci/nikhil-big-bar-fixes' into next
* pci/nikhil-big-bar-fixes:
  PCI: reorder __pci_assign_resource() (no change)
  PCI: fix truncation of resource size to 32 bits
2012-07-18 14:06:20 -06:00
Bjorn Helgaas d47557e461 Merge branch 'pci/julia-return-values' into next
* pci/julia-return-values:
  PCI: hotplug: ensure a consistent return value in error case
2012-07-16 09:29:01 -06:00
Julia Lawall 83d0571073 PCI: hotplug: ensure a consistent return value in error case
Typically, the return value desired for the failure of a function with an
integer return value is a negative integer.  In these cases, the return
value is sometimes a negative integer and sometimes 0, due to a subsequent
initialization of the return variable within the loop.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

//<smpl>
@r exists@
identifier ret;
position p;
constant C;
expression e1,e3,e4;
statement S;
@@

ret = -C
... when != ret = e3
    when any
if@p (...) S
... when any
if (\(ret != 0\|ret < 0\|ret > 0\) || ...) { ... return ...; }
... when != ret = e3
    when any
*if@p (...)
{
  ... when != ret = e4
  return ret;
}
//</smpl>

[bhelgaas: squashed into one patch]
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-16 09:25:56 -06:00
Bjorn Helgaas 8d20e2cfeb Merge branch 'pci/myron-final-fixups-v2' into next
* pci/myron-final-fixups-v2:
  PCI: fix undefined reference to 'pci_fixup_final_inited'
2012-07-16 09:17:43 -06:00
Myron Stowe 95df8b8708 PCI: fix undefined reference to 'pci_fixup_final_inited'
My "PCI: Integrate 'pci_fixup_final' quirks into hot-plug paths" patch
introduced an undefined reference to 'pci_fixup_final_inited' when
CONFIG_PCI_QUIRKS is not enabled (on x86_64):
  drivers/built-in.o: In function `pci_bus_add_device':
  (.text+0x4f62): undefined reference to `pci_fixup_final_inited'

This patch removes the external reference ending up with a result closer
to what we ultimately want when the boot path issues described in the
original patch are resolved.

References:
  https://lkml.org/lkml/2012/7/9/542    Original, offending, patch
  https://lkml.org/lkml/2012/7/12/338	Randy's catch

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
2012-07-16 09:14:49 -06:00
Bjorn Helgaas cfeeb34bc0 Merge branch 'pci/greg-m68k' into next
* pci/greg-m68k:
  PCI: build resource code for M68K architecture
2012-07-13 09:42:46 -06:00
Greg Ungerer 486ae3ea34 PCI: build resource code for M68K architecture
The ColdFire M54xx family of CPU cores (supported by the m68k arch code)
have PCI bus hardware. We want to be able to use this and will need the
setup-bus.c and setup-irq.c helper functions. So when CONFIG_M68K is
enabled add them to the objs build list.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-13 09:40:37 -06:00
Yinghai Lu e73cfecdfc PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
2012-07-12 15:41:32 -06:00
Bjorn Helgaas fe6dacdb1a PCI: reorder __pci_assign_resource() (no change)
Reorder functions so __pci_assign_resource(), _pci_assign_resource(),
and pci_assign_resource() are closer together.  No code change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-11 17:05:43 -06:00
Nikhil P Rao d6776e6d5c PCI: fix truncation of resource size to 32 bits
_pci_assign_resource() took an int "size" argument, which meant that
sizes larger than 4GB were truncated.  Change type to resource_size_t.

[bhelgaas: changelog]
Signed-off-by: Nikhil P Rao <nikhil.rao@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-11 16:57:44 -06:00
Bjorn Helgaas 7569c43e4d Merge branch 'pci/yinghai-hotplug-cleanup' into next
* pci/yinghai-hotplug-cleanup:
  PCI: acpiphp: merge acpiphp_debug and debug
  PCI: acpiphp: remove unused res_lock
2012-07-11 12:26:40 -06:00
Yinghai Lu 2ac45f28b8 PCI: acpiphp: merge acpiphp_debug and debug
Should not have two, just remove debug, and use module_param_named
instead.

Also change acpiphp_debug to bool.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-10 17:02:37 -06:00
Yinghai Lu e735a80bd5 PCI: acpiphp: remove unused res_lock
res_lock is never used, so remove it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-10 15:44:58 -06:00
Alan Stern dbf0e4c725 PCI: EHCI: fix crash during suspend on ASUS computers
Quite a few ASUS computers experience a nasty problem, related to the
EHCI controllers, when going into system suspend.  It was observed
that the problem didn't occur if the controllers were not put into the
D3 power state before starting the suspend, and commit
151b612847 (USB: EHCI: fix crash during
suspend on ASUS computers) was created to do this.

It turned out this approach messed up other computers that didn't have
the problem -- it prevented USB wakeup from working.  Consequently
commit c2fb8a3fa2 (USB: add
NO_D3_DURING_SLEEP flag and revert 151b612847) was merged; it
reverted the earlier commit and added a whitelist of known good board
names.

Now we know the actual cause of the problem.  Thanks to AceLan Kao for
tracking it down.

According to him, an engineer at ASUS explained that some of their
BIOSes contain a bug that was added in an attempt to work around a
problem in early versions of Windows.  When the computer goes into S3
suspend, the BIOS tries to verify that the EHCI controllers were first
quiesced by the OS.  Nothing's wrong with this, but the BIOS does it
by checking that the PCI COMMAND registers contain 0 without checking
the controllers' power state.  If the register isn't 0, the BIOS
assumes the controller needs to be quiesced and tries to do so.  This
involves making various MMIO accesses to the controller, which don't
work very well if the controller is already in D3.  The end result is
a system hang or memory corruption.

Since the value in the PCI COMMAND register doesn't matter once the
controller has been suspended, and since the value will be restored
anyway when the controller is resumed, we can work around the BIOS bug
simply by setting the register to 0 during system suspend.  This patch
(as1590) does so and also reverts the second commit mentioned above,
which is now unnecessary.

In theory we could do this for every PCI device.  However to avoid
introducing new problems, the patch restricts itself to EHCI host
controllers.

Finally the affected systems can suspend with USB wakeup working
properly.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=37632
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42728
Based-on-patch-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dâniel Fraga <fragabr@gmail.com>
Tested-by: Javier Marcet <jmarcet@gmail.com>
Tested-by: Andrey Rahmatullin <wrar@wrar.name>
Tested-by: Oleksij Rempel <bug-track@fisher-privat.net>
Tested-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Cc: stable <stable@vger.kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-10 09:52:05 -07:00
Bjorn Helgaas 6ee53f4c38 Merge branch 'pci/bjorn-p2p-bridge-windows' into next
* pci/bjorn-p2p-bridge-windows:
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: allow P2P bridge windows starting at PCI bus address zero

Conflicts:
	drivers/pci/probe.c
	include/linux/pci.h
2012-07-10 08:36:09 -06:00
Bjorn Helgaas d68e70c6e5 Merge branch 'pci/bjorn-disable-decode' into next
* pci/bjorn-disable-decode:
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
2012-07-09 21:02:44 -06:00
Bjorn Helgaas 9349b44a45 Merge branch 'pci/myron-final-fixups-v2' into next
* pci/myron-final-fixups-v2:
  PCI: call final fixups hot-added devices
  PCI: move final fixups from __init to __devinit
  x86/PCI: move final fixups from __init to __devinit
  MIPS/PCI: move final fixups from __init to __devinit
  PCI: never discard enable/suspend/resume_early/resume fixups
  PCI: release temporary reference in __nv_msi_ht_cap_quirk()
  PCI: restructure 'pci_do_fixups()'
2012-07-09 20:56:54 -06:00
Myron Stowe 735bff10c1 PCI: call final fixups hot-added devices
Final fixups are currently applied only at boot-time by
pci_apply_final_quirks(), which is an fs_initcall().  Hot-added devices
don't get these fixups, so they may not be completely initialized.

This patch makes us run final fixups for hot-added devices in
pci_bus_add_device() just before the new device becomes eligible for driver
binding.

This patch keeps the fs_initcall() for devices present at boot because we
do resource assignment between pci_bus_add_device and the fs_initcall(),
and we don't want to break any fixups that depend on that assignment.  This
is a design issue that may be addressed in the future -- any resource
assignment should be done *before* device_add().

[bhelgaas: changelog]
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 20:56:45 -06:00
Myron Stowe 3274c8eb26 PCI: move final fixups from __init to __devinit
Final fixups are executed during device enumeration.  If we support
hotplug, this may be after boot, so final fixups cannot be __init.

[bhelgaas: changelog]
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 20:56:45 -06:00
Yinghai Lu fd59134110 PCI: support sizing P2P bridge I/O windows with 1K granularity
Some bridges support I/O windows with 1K alignment, not just the 4K
alignment defined by the PCI spec.  For example, see the IOBL_ADR register
and the EN1K bit in the CNF register in the Intel 82870P2 (P64H2).

This patch adds support for sizing the window in 1K increments based
on the requirements of downstream devices.

[bhelgaas: changelog, comment]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 19:55:29 -06:00
Bjorn Helgaas 2b28ae1912 PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
9d265124d0 and 15a260d53f added quirks for P2P bridges that support
I/O windows that start/end at 1K boundaries, not just the 4K boundaries
defined by the PCI spec.  For details, see the IOBL_ADR register and the
EN1K bit in the CNF register in the Intel 82870P2 (P64H2).

These quirks complicate the code that reads P2P bridge windows
(pci_read_bridge_io() and pci_cfg_fake_ranges()) because the bridge
I/O resource is updated in the HEADER quirk, in pci_read_bridge_io(),
in pci_setup_bridge(), and again in the FINAL quirk.  This is confusing
and makes it impossible to reassign the bridge windows after FINAL
quirks are run.

This patch adds support for 1K windows in the generic paths, so the
HEADER quirk only has to enable this support.  The FINAL quirk, which
used to undo damage done by pci_setup_bridge(), is no longer needed.

This removes "if (!res->start) res->start = ..." from pci_read_bridge_io();
that was part of 9d265124d0 to avoid overwriting the resource filled in
by the quirk.  Since pci_read_bridge_io() itself now knows about
granularity, the quirk no longer updates the resource and this test is no
longer needed.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 19:52:04 -06:00
Bjorn Helgaas 9aac537e0e PCI: disable MEM decoding while updating 64-bit MEM BARs
When we update 64-bit BARs, we have to perform two config writes.  Between
the writes, the half-written BAR value could match a MEM access intended
for another device.  This could result in corruption of this device (for
writes) or an unexpected response machine check (for reads).

To prevent this, disable MEM decoding while updating such BARs.  This uses
the same safety test as 253d2e5498, which disables both MEM and IO while
sizing BARs, namely, we don't disable decoding for host bridge devices.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 19:50:53 -06:00
Bjorn Helgaas bbffe43524 PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
After 253d2e5498, we disable MEM and IO decoding for most devices while we
size 32-bit BARs.  However, we restore the original COMMAND register before
we size the upper 32 bits of 64-bit BARs, so we can still cause a conflict.

This patch waits to restore the original COMMAND register until we're
completely finished sizing the BAR.

Reference: https://lkml.org/lkml/2007/8/25/154
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 19:49:24 -06:00
Myron Stowe 25e742b270 PCI: never discard enable/suspend/resume_early/resume fixups
The enable/suspend/resume_early/resume fixups can be called at any time, so
they can't be __init or __devinit.

[bhelgaas: changelog]
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 16:43:41 -06:00
Myron Stowe dff3aef713 PCI: release temporary reference in __nv_msi_ht_cap_quirk()
__nv_msi_ht_cap_quirk() acquires a temporary reference via
'pci_get_bus_and_slot()' that is never released.

This patch releases the temporary reference.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 16:43:27 -06:00
Myron Stowe 2729d5b18d PCI: restructure 'pci_do_fixups()'
This patch restructures pci_do_fixups()'s quirk invocations in the style
of initcall_debug_start() and initcall_debug_report(), so we have only
one call site for the quirk.

[bhelgaas: changelog]
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 16:41:13 -06:00
Bjorn Helgaas 5dde383e2e PCI: allow P2P bridge windows starting at PCI bus address zero
cd81e1ea1a added checks that prevent us from using P2P bridge windows
that start at PCI bus address zero.  The reason was to "prevent us from
overwriting resources that are unassigned."

But generic code should allow address zero in both BARs and bridge
windows, so I think that commit was a mistake.

Windows at bus address zero are legal and likely to exist on machines with
an offset between bus addresses and CPU addresses.  For example, in the
following hypothetical scenario, the bridge at 00:01.0 has a window at bus
address zero and the device at 01:00.0 has a BAR at bus address zero, and
I think both are perfectly valid:

    PCI host bridge to bus 0000:00
    pci_bus 0000:00: root bus resource [mem 0x100000000-0x1ffffffff] (bus address [0x00000000-0xffffffff])
    pci 0000:00:01.0: PCI bridge to [bus 01]
    pci 0000:00:01.0:   bridge window [mem 0x100000000-0x100ffffff]
    pci 0000:01:00.0: reg 10: [mem 0x100000000-0x100ffffff]

Acked-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-09 13:38:41 -06:00
Bjorn Helgaas a7711ba109 Merge branch 'pci/rafael-pci_set_power_state-rebase' into next
* pci/rafael-pci_set_power_state-rebase:
  PCI / PM: restore the original behavior of pci_set_power_state()
2012-07-05 16:29:52 -06:00
Bjorn Helgaas 85a00dd391 Merge branch 'pci/myron-pcibios_setup' into next
* pci/myron-pcibios_setup:
  xtensa/PCI: factor out pcibios_setup()
  x86/PCI: adjust section annotations for pcibios_setup()
  unicore32/PCI: adjust section annotations for pcibios_setup()
  tile/PCI: factor out pcibios_setup()
  sparc/PCI: factor out pcibios_setup()
  sh/PCI: adjust section annotations for pcibios_setup()
  sh/PCI: factor out pcibios_setup()
  powerpc/PCI: factor out pcibios_setup()
  parisc/PCI: factor out pcibios_setup()
  MIPS/PCI: adjust section annotations for pcibios_setup()
  MIPS/PCI: factor out pcibios_setup()
  microblaze/PCI: factor out pcibios_setup()
  ia64/PCI: factor out pcibios_setup()
  cris/PCI: factor out pcibios_setup()
  alpha/PCI: factor out pcibios_setup()
  PCI: pull pcibios_setup() up into core
2012-07-05 15:31:05 -06:00
Rafael J. Wysocki db288c9c5f PCI / PM: restore the original behavior of pci_set_power_state()
Commit cc2893b6 (PCI: Ensure we re-enable devices on resume)
addressed the problem with USB not being powered after resume on
recent Lenovo machines, but it did that in a suboptimal way.
Namely, it should have changed the relevant code paths only,
which are pci_pm_resume_noirq() and pci_pm_restore_noirq() supposed
to restore the device's power and standard configuration registers
after system resume from suspend or hibernation.  Instead, however,
it modified pci_set_power_state() which is executed in several
other situations too.  That resulted in some undesirable effects,
like attempting to change a device's power state in the same way
multiple times in a row (up to as many as 4 times in a row in the
snd_hda_intel driver).

Fix the bug addressed by commit cc2893b6 in an alternative way,
by forcibly powering up all devices in pci_pm_default_resume_early(),
which is called by pci_pm_resume_noirq() and pci_pm_restore_noirq()
to restore the device's power and standard configuration registers,
and modifying pci_pm_runtime_resume() to avoid the forcible power-up
if not necessary.  Then, revert the changes made by commit cc2893b6
to make the confusion introduced by it go away.

Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-05 15:20:00 -06:00
Myron Stowe 2b6f2c3520 PCI: pull pcibios_setup() up into core
Currently, all of the architectures implement their own pcibios_setup()
routine.  Most of the implementations do nothing so this patch introduces
a generic (__weak) routine in the core that can be used by all
architectures as a default.  If necessary, it can be overridden by
architecture-specific code.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-26 06:22:31 -06:00
Bjorn Helgaas 35e7f73c32 Merge branch 'topic/huang-d3cold-v7' into next
* topic/huang-d3cold-v7:
  PCI/PM: add PCIe runtime D3cold support
  PCI: do not call pci_set_power_state with PCI_D3cold
  PCI/PM: add runtime PM support to PCIe port
  ACPI/PM: specify lowest allowed state for device sleep state
2012-06-23 11:59:43 -06:00
Huang Ying 448bd857d4 PCI/PM: add PCIe runtime D3cold support
This patch adds runtime D3cold support and corresponding ACPI platform
support.  This patch only enables runtime D3cold support; it does not
enable D3cold support during system suspend/hibernate.

D3cold is the deepest power saving state for a PCIe device, where its main
power is removed.  While it is in D3cold, you can't access the device at
all, not even its configuration space (which is still accessible in D3hot).
Therefore the PCI PM registers can not be used to transition into/out of
the D3cold state; that must be done by platform logic such as ACPI _PR3.

To support wakeup from D3cold, a system may provide auxiliary power, which
allows a device to request wakeup using a Beacon or the sideband WAKE#
signal.  WAKE# is usually connected to platform logic such as ACPI GPE.
This is quite different from other power saving states, where devices
request wakeup via a PME message on the PCIe link.

Some devices, such as those in plug-in slots, have no direct platform
logic.  For example, there is usually no ACPI _PR3 for them.  D3cold
support for these devices can be done via the PCIe Downstream Port leading
to the device.  When the PCIe port is powered on/off, the device is powered
on/off too.  Wakeup events from the device will be notified to the
corresponding PCIe port.

For more information about PCIe D3cold and corresponding ACPI support,
please refer to:

- PCI Express Base Specification Revision 2.0
- Advanced Configuration and Power Interface Specification Revision 5.0

[bhelgaas: changelog]
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Originally-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-23 10:50:59 -06:00
Zheng Yan 71a83bd727 PCI/PM: add runtime PM support to PCIe port
This patch adds runtime PM support to PCIe port.  This is needed by
PCIe D3cold support, where PCIe device without ACPI node may be
powered on/off by PCIe port.

Because runtime suspend is broken for some chipsets, a black list is
used to disable runtime PM support for these chipsets.

Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-23 10:47:47 -06:00
Huang Ying ee85f54371 ACPI/PM: specify lowest allowed state for device sleep state
Lower device sleep state can save more power, but has more exit
latency too.  Sometimes, to satisfy some power QoS and other
requirement, we need to constrain the lowest device sleep state.

In this patch, a parameter to specify lowest allowed state for
acpi_pm_device_sleep_state is added.  So that the caller can enforce
the constraint via the parameter.

This is needed by PCIe D3cold support, where the lowest power state
allowed may be D3_HOT instead of default D3_COLD.

CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-23 10:41:09 -06:00
Bjorn Helgaas e5028b52e4 Merge branch 'topic/jiang-mmconfig-v10' into next
* topic/jiang-mmconfig-v10:
  ACPI: mark acpi_sfi_table_parse() as __init
  x86/PCI: use pr_level() to replace printk(KERN_LEVEL)
  x86/PCI: refine __pci_mmcfg_init() for better code readability
  x86/PCI: get rid of redundant log messages
  x86/PCI: simplify pci_mmcfg_late_insert_resources()
  x86/PCI: update MMCONFIG information when hot-plugging PCI host bridges
  PCI/ACPI: provide MMCONFIG address for PCI host bridges
  x86/PCI: add pci_mmconfig_insert()/delete() for PCI root bridge hotplug
  x86/PCI: prepare pci_mmcfg_check_reserved() to be called at runtime
  x86/PCI: introduce pci_mmcfg_arch_map()/pci_mmcfg_arch_unmap()
  x86/PCI: use RCU list to protect mmconfig list
  x86/PCI: split out pci_mmconfig_alloc() for code reuse
  x86/PCI: split out pci_mmcfg_check_reserved() for code reuse
2012-06-22 15:39:00 -06:00
Bjorn Helgaas 0f6662a49b Merge branch 'topic/bjorn-trivial' into next
* topic/bjorn-trivial:
  PCI: remove useless pcix_set_mmrbc() dev->bus check
  PCI: acpiphp: check whether _ADR evaluation succeeded
  PCI: shpchp: remove dead code
  PCI: fix P2P bridge I/O port window sign extension
  PCI: fix upstream P2P bridge checks when enabling OBFF and LTR
  PCI: use __weak consistently
  PCI: cleanup assign_requested_resources_sorted() kernel-doc warning
  sparc/PCI: remove unused pcibios_assign_resource() definition
2012-06-22 15:32:50 -06:00
Jiang Liu f4b57a3b43 PCI/ACPI: provide MMCONFIG address for PCI host bridges
This patch provide MMCONFIG address for PCI host bridges, which will
be used to support host bridge hotplug.  It gets MMCONFIG address
by evaluating _CBA method if available.

Reviewed-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-22 15:16:51 -06:00
Bjorn Helgaas 809a3bf9f3 PCI: remove useless pcix_set_mmrbc() dev->bus check
For a valid pci_dev, dev->bus != NULL always, so remove this
unnecessary test.

Found by Coverity (CID 101680).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 17:28:53 -06:00
Bjorn Helgaas dfb117b3e5 PCI: acpiphp: check whether _ADR evaluation succeeded
Check whether we evaluated _ADR successfully.  Previously we ignored
failure, so we would have used garbage data from the stack as the device
and function number.

We return AE_OK so that we ignore only this slot and continue looking
for other slots.

Found by Coverity (CID 113981).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 17:28:53 -06:00
Bjorn Helgaas 67454b6602 PCI: shpchp: remove dead code
"slots_not_empty" is initialized to zero and can't be set again before
reaching this point, so this return statement is dead.  Remove it.

Found by Coverity (CID 114324).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 17:28:53 -06:00
Bjorn Helgaas 8f38eaca55 PCI: fix P2P bridge I/O port window sign extension
On P2P bridges with 32-bit I/O decoding, we incorrectly sign-extended
windows starting at 0x80000000 or above.  In "base |= (io_base_hi << 16)",
"io_base_hi" is promoted to a signed int before being extended to an
unsigned long.

This would cause a window starting at I/O address 0x80000000 to be
treated as though it started at 0xffffffff80008000 instead, which
should cause "no compatible bridge window" errors when we enumerate
devices using that I/O space.

The mmio and mmio_pref casts are not strictly necessary, but without
them, correctness depends on the types of the PCI_MEMORY_RANGE_MASK and
PCI_PREF_RANGE_MASK constants, which are not obvious from reading the
local code.

Found by Coverity (CID 138747 and CID 138748).

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-20 17:28:53 -06:00