Commit Graph

30380 Commits

Author SHA1 Message Date
Chun-Yeow Yeoh c0f17eb9b2 mac80211: refactor the parsing of chan switch ie
Refactor the channel switch IE parsing to reduce the number
of function parameters.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:28 +01:00
Felix Fietkau 06be6b149f mac80211: add ieee80211_tx_prepare_skb() helper function
This can be used by a driver to prepare skbs for transmission, which were
obtained via functions such as ieee80211_probereq_get or
ieee80211_nullfunc_get.

This is useful for drivers that want to send those frames directly, but
need rate control information to be prepared first.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:27 +01:00
Luis R. Rodriguez 034c6d6e67 cfg80211: export reg_initiator_name()
Drivers can now use this to parse the regulatory request and
be more verbose when needed.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:27 +01:00
Marco Porsch 446075d76b mac80211: fixes for mesh powersave logic
This patch fixes errors in the mesh powersave logic which
cause that remote peers do not get peer power mode change
notifications and mesh peer service periods (MPSPs) got
stuck.

When closing a peer link, set the (now invalid) peer-specific
power mode to 'unknown'.

Avoid overhead when local power mode is unchanged.

Reliably clear MPSP flags on peering status update.

Avoid MPSP flags getting stuck by not requesting a further
MPSP ownership if we already are an MPSP owner.

Signed-off-by: Marco Porsch <marco@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:26 +01:00
Seth Forshee 17ac49594f mac80211: Remove check for offchannel state when waking netdev queues
6c17b77b67 ensures that a device's
mac80211 queues will remain stopped while offchannel. Since the
vif can no longer be offchannel when the queues wake it's not
necessary to check for this before waking its netdev queues.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:26 +01:00
Heikki Krogerus ef91ffaa03 net: rfkill: gpio: add ACPI support
Including ACPI ID for Broadcom GPS receiver BCM4752.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:25 +01:00
Heikki Krogerus 262c91ee5e net: rfkill: gpio: prepare for DT and ACPI support
This will add the relevant values like the gpios and the
type in rfkill_gpio_platform_data to the rfkill_gpio_data
structure. It will allow those values to be easily picked
from DT and ACPI tables later.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:25 +01:00
Heikki Krogerus 0be81727a4 net: rfkill: gpio: spinlock-safe GPIO access
This sets the direction of the gpio once when it's requested,
and uses the spinlock-safe gpio_set_state() to change the
state.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:24 +01:00
Heikki Krogerus f02ae59b12 net: rfkill: gpio: clean up clock handling
Use a simple flag to see the state of the clock, and make
the clock available even without a name. Also, get rid of
HAVE_CLK dependency.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:24 +01:00
Heikki Krogerus 5e7ca3937f net: rfkill: gpio: convert to resource managed allocation
And remove now unneeded resource freeing.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:23 +01:00
Simon Wunderlich 8e8d347da7 mac80211: enable DFS for IBSS mode
Allow changing to DFS channels if the channel is available for
beaconing and userspace controls DFS operation.

Channel switch announcement from other stations on DFS channels will
be interpreted as radar event. These channels will then be marked as
unvailable.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:21 +01:00
Simon Wunderlich 5336fa88e8 nl80211/cfg80211: enable DFS for IBSS mode
To use DFS in IBSS mode, userspace is required to react to radar events.
It can inform nl80211 that it is capable of doing so by adding a
NL80211_ATTR_HANDLE_DFS attribute when joining the IBSS.

This attribute is supplied to let the kernelspace know that the
userspace application can and will handle radar events, e.g. by
intiating channel switches to a valid channel. DFS channels may
only be used if this attribute is supplied and the driver supports
it. Driver support will be checked even if a channel without DFS
will be initially joined, as a DFS channel may be chosen later.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de>
[fix attribute name in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:21 +01:00
Emmanuel Grumbach 687da13223 mac80211: implement SMPS for AP
When the driver requests to move to STATIC or DYNAMIC SMPS,
we send an action frame to each associated station and
reconfigure the channel context / driver.
Of course, non-MIMO stations are ignored.

The beacon isn't updated. The association response will
include the original capabilities. Stations that associate
while in non-OFF SMPS mode will get an action frame right
after association to inform them about our current state.
Note that we wait until the end of the EAPOL. Sending an
action frame before the EAPOL is finished can be an issue
for a few clients. Clients aren't likely to send EAPOL
frames in MIMO anyway.

When the SMPS configuration gets more permissive (e.g.
STATIC -> OFF), we don't wake up stations that are asleep
We remember that they don't know about the change and send
the action frame when they wake up.

When the SMPS configuration gets more restrictive (e.g.
OFF -> STATIC), we set the TIM bit for every sleeping STA.
uAPSD stations might send MIMO until they poll the action
frame, but this is for a short period of time.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
[fix vht streams loop, initialisation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28 15:05:11 +01:00
Daniel Borkmann 6e7cd27c0f net: ipvs: sctp: add missing verdict assignments in sctp_conn_schedule
If skb_header_pointer() fails, we need to assign a verdict, that is
NF_DROP in this case, otherwise, we would leave the verdict from
conn_schedule() uninitialized when returning.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
2013-10-28 19:00:49 +09:00
Steffen Klassert eeb1b73378 xfrm: Increase the garbage collector threshold
With the removal of the routing cache, we lost the
option to tweak the garbage collector threshold
along with the maximum routing cache size. So git
commit 703fb94ec ("xfrm: Fix the gc threshold value
for ipv4") moved back to a static threshold.

It turned out that the current threshold before we
start garbage collecting is much to small for some
workloads, so increase it from 1024 to 32768. This
means that we start the garbage collector if we have
more than 32768 dst entries in the system and refuse
new allocations if we are above 65536.

Reported-by: Wolfgang Walter <linux@stwm.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-28 07:37:52 +01:00
wangweidong 747edc0f9e sctp: merge two if statements to one
Two if statements do the same work, we can merge them to
one. And fix some typos. There is just code simplification,
no functional changes.

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 01:02:34 -04:00
wangweidong 3dc0a548a0 sctp: remove the repeat initialize with 0
kmem_cache_zalloc had set the allocated memory to zero. I think no need
to initialize with 0. And move the comments to the function begin.

Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 01:02:34 -04:00
wangweidong 2bccbadf20 sctp: fix some comments in chunk.c and associola.c
fix some typos

Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 01:02:34 -04:00
Eric Dumazet 8c3a897bfa inet: restore gso for vxlan
Alexei reported a performance regression on vxlan, caused
by commit 3347c96029 "ipv4: gso: make inet_gso_segment() stackable"

GSO vxlan packets were not properly segmented, adding IP fragments
while they were not expected.

Rename 'bool tunnel' to 'bool encap', and add a new boolean
to express the fact that UDP should be fragmented.
This fragmentation is triggered by skb->encapsulation being set.

Remove a "skb->encapsulation = 1" added in above commit,
as its not needed, as frags inherit skb->frag from original
GSO skb.

Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 00:23:06 -04:00
Eric Dumazet fc59d5bdf1 pkt_sched: fq: clear time_next_packet for reused flows
When a socket is freed/reallocated, we need to clear time_next_packet
or else we can inherit a prior value and delay first packets of the
new flow.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-28 00:18:31 -04:00
Yuchung Cheng 2f715c1dde tcp: do not rearm RTO when future data are sacked
Patch ed08495c3 "tcp: use RTT from SACK for RTO" always re-arms RTO upon
obtaining a RTT sample from newly sacked data.

But technically RTO should only be re-armed when the data sent before
the last (re)transmission of write queue head are (s)acked. Otherwise
the RTO may continue to extend during loss recovery on data sent
in the future.

Note that RTTs from ACK or timestamps do not have this problem, as the RTT
source must be from data sent before.

The new RTO re-arm policy is
1) Always re-arm RTO if SND.UNA is advanced
2) Re-arm RTO if sack RTT is available, provided the sacked data was
   sent before the last time write_queue_head was sent.

Signed-off-by: Larry Brakmo <brakmo@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-27 16:50:06 -04:00
Yuchung Cheng 2909d874f3 tcp: only take RTT from timestamps if new data is acked
Patch ed08495c3 "tcp: use RTT from SACK for RTO" has a bug that
it does not check if the ACK acknowledge new data before taking
the RTT sample from TCP timestamps. This patch adds the check
back as required by the RFC.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-27 16:50:06 -04:00
Yuchung Cheng bc15afa39e tcp: fix SYNACK RTT estimation in Fast Open
tp->lsndtime may not always be the SYNACK timestamp if a passive
Fast Open socket sends data before handshake completes. And if the
remote acknowledges both the data and the SYNACK, the RTT sample
is already taken in tcp_ack(), so no need to call
tcp_update_ack_rtt() in tcp_synack_rtt_meas() aagain.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-27 16:50:06 -04:00
Florian Westphal 6b8dbcf2c4 bridge: netfilter: orphan skb before invoking ip netfilter hooks
Pekka Pietikäinen reports xt_socket behavioural change after commit
00028aa37098o (netfilter: xt_socket: use IP early demux).

Reason is xt_socket now no longer does an unconditional sk lookup -
it re-uses existing skb->sk if possible, assuming ->sk was set by
ip early demux.

However, when netfilter is invoked via bridge, this can cause 'bogus'
sockets to be examined by the match, e.g. a 'tun' device socket.

bridge netfilter should orphan the skb just like the routing path
before invoking ipv4/ipv6 netfilter hooks to avoid this.

Reported-and-tested-by: Pekka Pietikäinen <pp@ee.oulu.fi>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-27 21:44:33 +01:00
Michael Opdenacker 1e56555ee1 netfilter: ipset: remove duplicate define
This patch removes a duplicate define from
net/netfilter/ipset/ip_set_hash_gen.h

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-10-27 19:24:45 +01:00
Jozsef Kadlecsik dc476e7c8e netfilter:ipset: Fix memory allocation for bitmap:port
At the restructuring of the bitmap types creation in ipset, for the
bitmap:port type wrong (too large) memory allocation was copied
(netfilter bugzilla id #859).

Reported-by: Quentin Armitage <quentin@armitage.org.uk>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
2013-10-27 19:24:39 +01:00
Jeff Layton cf4c024b90 sunrpc: trim off EC bytes in GSSAPI v2 unwrap
As Bruce points out in RFC 4121, section 4.2.3:

   "In Wrap tokens that provide for confidentiality, the first 16 octets
    of the Wrap token (the "header", as defined in section 4.2.6), SHALL
    be appended to the plaintext data before encryption.  Filler octets
    MAY be inserted between the plaintext data and the "header.""

...and...

   "In Wrap tokens with confidentiality, the EC field SHALL be used to
    encode the number of octets in the filler..."

It's possible for the client to stuff different data in that area on a
retransmission, which could make the checksum come out wrong in the DRC
code.

After decrypting the blob, we should trim off any extra count bytes in
addition to the checksum blob.

Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-10-26 15:36:55 -04:00
Hannes Frederic Sowa e3bc10bd95 ipv6: ip6_dst_check needs to check for expired dst_entries
On receiving a packet too big icmp error we check if our current cached
dst_entry in the socket is still valid. This validation check did not
care about the expiration of the (cached) route.

The error path I traced down:
The socket receives a packet too big mtu notification. It still has a
valid dst_entry and thus issues the ip6_rt_pmtu_update on this dst_entry,
setting RTF_EXPIRE and updates the dst.expiration value (which could
fail because of not up-to-date expiration values, see previous patch).

In some seldom cases we race with a) the ip6_fib gc or b) another routing
lookup which would result in a recreation of the cached rt6_info from its
parent non-cached rt6_info. While copying the rt6_info we reinitialize the
metrics store by copying it over from the parent thus invalidating the
just installed pmtu update (both dsts use the same key to the inetpeer
storage). The dst_entry with the just invalidated metrics data would
just get its RTF_EXPIRES flag cleared and would continue to stay valid
for the socket.

We should have not issued the pmtu update on the already expired dst_entry
in the first placed. By checking the expiration on the dst entry and
doing a relookup in case it is out of date we close the race because
we would install a new rt6_info into the fib before we issue the pmtu
update, thus closing this race.

Not reliably updating the dst.expire value was fixed by the patch "ipv6:
reset dst.expires value when clearing expire flag".

Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Reported-by: Valentijn Sessink <valentyn@blub.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Valentijn Sessink <valentyn@blub.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:26:59 -04:00
Antonio Quartulli 8fb479a47c netpoll: fix rx_hook() interface by passing the skb
Right now skb->data is passed to rx_hook() even if the skb
has not been linearised and without giving rx_hook() a way
to linearise it.

Change the rx_hook() interface and make it accept the skb
and the offset to the UDP payload as arguments. rx_hook() is
also renamed to rx_skb_hook() to ensure that out of the tree
users notice the API change.

In this way any rx_skb_hook() implementation can perform all
the needed operations to properly (and safely) access the
skb data.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:26:58 -04:00
Alexei Starovoitov 7f29405403 net: fix rtnl notification in atomic context
commit 991fb3f74c "dev: always advertise rx_flags changes via netlink"
introduced rtnl notification from __dev_set_promiscuity(),
which can be called in atomic context.

Steps to reproduce:
ip tuntap add dev tap1 mode tap
ifconfig tap1 up
tcpdump -nei tap1 &
ip tuntap del dev tap1 mode tap

[  271.627994] device tap1 left promiscuous mode
[  271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940
[  271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip
[  271.677525] INFO: lockdep is turned off.
[  271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G        W    3.12.0-rc3+ #73
[  271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[  271.731254]  ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428
[  271.760261]  ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8
[  271.790683]  0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8
[  271.822332] Call Trace:
[  271.838234]  [<ffffffff817544e5>] dump_stack+0x55/0x76
[  271.854446]  [<ffffffff8108bad1>] __might_sleep+0x181/0x240
[  271.870836]  [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0
[  271.887076]  [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0
[  271.903368]  [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0
[  271.919716]  [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0
[  271.936088]  [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0
[  271.952504]  [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0
[  271.968902]  [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100
[  271.985302]  [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0
[  272.001642]  [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0
[  272.017917]  [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380
[  272.033961]  [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50
[  272.049855]  [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0
[  272.065494]  [<ffffffff81732052>] packet_notifier+0x1b2/0x380
[  272.080915]  [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380
[  272.096009]  [<ffffffff81761c66>] notifier_call_chain+0x66/0x150
[  272.110803]  [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10
[  272.125468]  [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20
[  272.139984]  [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70
[  272.154523]  [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20
[  272.168552]  [<ffffffff816224c5>] rollback_registered_many+0x145/0x240
[  272.182263]  [<ffffffff81622641>] rollback_registered+0x31/0x40
[  272.195369]  [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90
[  272.208230]  [<ffffffff81547ca0>] __tun_detach+0x140/0x340
[  272.220686]  [<ffffffff81547ed6>] tun_chr_close+0x36/0x60

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:45 -04:00
Hannes Frederic Sowa 66415cf8a1 net: initialize hashrnd in flow_dissector with net_get_random_once
We also can defer the initialization of hashrnd in flow_dissector
to its first use. Since net_get_random_once is irq safe now we don't
have to audit the call paths if one of this functions get called by an
interrupt handler.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Hannes Frederic Sowa f84be2bd96 net: make net_get_random_once irq safe
I initial build non irq safe version of net_get_random_once because I
would liked to have the freedom to defer even the extraction process of
get_random_bytes until the nonblocking pool is fully seeded.

I don't think this is a good idea anymore and thus this patch makes
net_get_random_once irq safe. Now someone using net_get_random_once does
not need to care from where it is called.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Nikolay Aleksandrov 974daef7f8 net: add missing dev_put() in __netdev_adjacent_dev_insert
I think that a dev_put() is needed in the error path to preserve the
proper dev refcount.

CC: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Hagen Paul Pfeifer 4a3ad7b3ea netem: markov loss model transition fix
The transition from markov state "3 => lost packets within a burst
period" to "1 => successfully transmitted packets within a gap period"
has no *additional* loss event. The loss already happen for transition
from 1 -> 3, this additional loss will make things go wild.

E.g. transition probabilities:

p13:   10%
p31:  100%

Expected:

Ploss = p13 / (p13 + p31)
Ploss = ~9.09%

... but it isn't. Even worse: we get a double loss - each time.
So simple don't return true to indicate loss, rather break and return
false.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Stefano Salsano <stefano.salsano@uniroma2.it>
Cc: Fabio Ludovici <fabio.ludovici@yahoo.it>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25 19:03:39 -04:00
Vinod Koul 27bf697083 net: use DMA_COMPLETE for dma completion status
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-25 11:16:21 +05:30
Al Viro 72c2d53192 file->f_op is never NULL...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:54 -04:00
Al Viro 1e903edadf sunrpc: switch to %pd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-24 23:34:51 -04:00
David S. Miller b45bd46dec Included changes:
- data structure reshaping to accommodate multiple routing protocol
   implementations
 - routing protocol API enhancement
 - send to userspace the event "batman-adv Gateway loss" in case of soft-iface
   destruction and a "batman-adv Gateway" was configured
 - improve the TT component to support and advertise runtime flag changes
 - minor code refactoring
 - make the ICMP kernel-to-userspace communication more generic
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJSZ+VyAAoJEADl0hg6qKeOccIP/1RE68wFqd20BTh6WtnKo4s6
 H/F5WMUrk/HCNe3p4JnIOYv5WESR3tqTylCqBIl3yzcsks2KsLm4zEG5FIx/0J3Y
 1Mgy8V/xlGVN7M+wFSLCgzpTnJ3aCvy7+ied2qoz9KsC4vgiKUimDkPTsbUL7NUp
 OBmJGYfe/nLDoPI/CXu3nJCtNXcDgv5a5Z8ZMBuipeK++JsBMZRLfJEIM+7Q4Ouc
 KNLZFXavwtXAxsHLpWDS48MkVAz0tbyy4P6e2k7iQQq+W1WZjCoFMz0xLIKRFf+Y
 yOOZXItpTTX7rzLxFHkLAopZo9UMPsFjm/OceFBlnAbp24ftfR0b4gjFAUQiKFsq
 lGlGIXVkhsR6arfQ4SIlrrGOW7h+Kea2I1aPWC7yoi/97+22Nrr/a903p+kkhP4t
 sAoMk7DbbdajcV01RULF+xjaBFvEdaSfSBVB5j76Gf9AxNZfSGd7wH1qPG7O7HFT
 jO6Z4fbG6bbHBHMt9j4o9oGg4h5X8epbhZB7e8rwoBe/dSzw+B4CK2Y+j1/QW3C4
 PDqL3t5yi0O0+dhkI2G8DmhTOm+ZKVZt60WIMM+G5T6DiLyECveexGWIbjjZR67w
 qgVXsvE0PwHabY8Ne/z+IlnHY8zegUFYVusQ0lQfLpkKhdjoYXLF709RT42r2QIN
 8/6WlNGD2YG/0sWEDF7H
 =sYKR
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
this is another set of changes intended for net-next/linux-3.13.
(probably our last pull request for this cycle)

Patches 1 and 2 reshape two of our main data structures in a way that they can
easily be extended in the future to accommodate new routing protocols.

Patches from 3 to 9 improve our routing protocol API and its users so that all
the protocol-related code is not mixed up with the other components anymore.

Patch 10 limits the local Translation Table maximum size to a value such that it
can be fully transfered over the air if needed. This value depends on
fragmentation being enabled or not and on the mtu values.

Patch 11 makes batman-adv send a uevent in case of soft-interface destruction
while a "bat-Gateway" was configured (this informs userspace about the GW not
being available anymore).

Patches 13 and 14 enable the TT component to detect non-mesh client flag
changes at runtime (till now those flags where set upon client detection and
were not changed anymore).

Patch 16 is a generalisation of our user-to-kernel space communication (and
viceversa) used to exchange ICMP packets to send/received to/from the mesh
network. Now it can easily accommodate new ICMP packet types without breaking
the existing userspace API anymore.

Remaining patches are minor changes and cleanups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:12:33 -04:00
Hannes Frederic Sowa 7088ad74e6 inet: remove old fragmentation hash initializing
All fragmentation hash secrets now get initialized by their
corresponding hash function with net_get_random_once. Thus we can
eliminate the initial seeding.

Also provide a comment that hash secret seeding happens at the first
call to the corresponding hashing function.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:01:41 -04:00
Hannes Frederic Sowa b1190570b4 ipv6: split inet6_hash_frag for netfilter and initialize secrets with net_get_random_once
Defer the fragmentation hash secret initialization for IPv6 like the
previous patch did for IPv4.

Because the netfilter logic reuses the hash secret we have to split it
first. Thus introduce a new nf_hash_frag function which takes care to
seed the hash secret.

Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:01:40 -04:00
Hannes Frederic Sowa e7b519ba55 ipv4: initialize ip4_frags hash secret as late as possible
Defer the generation of the first hash secret for the ipv4 fragmentation
cache as late as possible.

ip4_frags.rnd gets initial seeded by inet_frags_init and regulary
reseeded by inet_frag_secret_rebuild. Either we call ipqhashfn directly
from ip_fragment.c in which case we initialize the secret directly.

If we first get called by inet_frag_secret_rebuild we install a new secret
by a manual call to get_random_bytes. This secret will be overwritten
as soon as the first call to ipqhashfn happens. This is safe because we
won't race while publishing the new secrets with anyone else.

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:01:40 -04:00
Daniel Borkmann fecda03493 net: sctp: fix ASCONF to allow non SCTP_ADDR_SRC addresses in ipv6
Commit 8a07eb0a50 ("sctp: Add ASCONF operation on the single-homed host")
implemented possible use of IPv4 addresses with non SCTP_ADDR_SRC state
as source address when sending ASCONF (ADD) packets, but IPv6 part for
that was not implemented in 8a07eb0a50. Therefore, as this is not restricted
to IPv4-only, fix this up to allow the same for IPv6 addresses in SCTP.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Michio Honda <micchie@sfc.wide.ad.jp>
Acked-by: Michio Honda <micchie@sfc.wide.ad.jp>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 16:57:14 -04:00
David S. Miller afb14c7cb6 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
The following patchset contains three netfilter fixes for your net
tree, they are:

* A couple of fixes to resolve info leak to userspace due to uninitialized
  memory area in ulogd, from Mathias Krause.

* Fix instruction ordering issues that may lead to the access of
  uninitialized data in x_tables. The problem involves the table update
 (producer) and the main packet matching (consumer) routines. Detected in
  SMP ARMv7, from Will Deacon.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 16:55:04 -04:00
David S. Miller c3fa32b976 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/usb/qmi_wwan.c
	include/net/dst.h

Trivial merge conflicts, both were overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 16:49:34 -04:00
Hannes Frederic Sowa 34d92d5315 net: always inline net_secret_init
Currently net_secret_init does not get inlined, so we always have a call
to net_secret_init even in the fast path.

Let's specify net_secret_init as __always_inline so we have the nop in
the fast-path without the call to net_secret_init and the unlikely path
at the epilogue of the function.

jump_labels handle the inlining correctly.

Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 16:26:46 -04:00
Simon Wunderlich da6b8c20a5 batman-adv: generalize batman-adv icmp packet handling
Instead of handling icmp packets only up to length of icmp_packet_rr,
the code should handle any icmp length size. Therefore the length
truncating is moved to when the packet is actually sent to userspace
(this does not support lengths longer than icmp_packet_rr yet). Longer
packets are forwarded without truncating.

This patch also cleans up some parts where the icmp header struct could
be used instead of other icmp_packet(_rr) structs to make the code more
readable.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-23 17:03:47 +02:00
Simon Wunderlich 15c33da6e8 batman-adv: Start new development cycle
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-23 17:03:46 +02:00
Antonio Quartulli 0eb01568f0 batman-adv: include the sync-flags when compute the global/local table CRC
Flags covered by TT_SYNC_MASK are kept in sync among the
nodes in the network and therefore they have to be
considered while computing the global/local table CRC.

In this way a generic originator is able to understand if
its table contains the correct flags or not.

Bits from 4 to 7 in the TT flags fields are now reserved for
"synchronized" flags only.

This allows future developers to add more flags of this type
without breaking compatibility.

It's important to note that not all the remote TT flags are
synchronised. This comes from the fact that some flags are
used to inject an information once only.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23 17:03:46 +02:00
Antonio Quartulli 3c4f7ab60c batman-adv: improve the TT component to support runtime flag changes
Some flags (i.e. the WIFI flag) may change after that the
related client has already been announced. However it is
useful to informa the rest of the network about this change.

Add a runtime-flag-switch detection mechanism and
re-announce the related TT entry to advertise the new flag
value.

This mechanism can be easily exploited by future flags that
may need the same treatment.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23 17:03:45 +02:00
Antonio Quartulli 0c69aecc5b batman-adv: invoke dev_get_by_index() outside of is_wifi_iface()
Upcoming changes need to perform other checks on the
incoming net_device struct.

To avoid performing dev_get_by_index() for each and every
check, it is better to move it outside of is_wifi_iface()
and search the netdev object once only.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23 17:03:44 +02:00
Antonio Quartulli 8257f55ae2 batman-adv: send GW_DEL event in case of soft-iface destruction
In case of soft_iface destruction send a GW DEL event to
userspace so that applications which are listening for GW
events are informed about the lost of connectivity and can
react accordingly.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23 17:03:44 +02:00
Marek Lindner a19d3d85e1 batman-adv: limit local translation table max size
The local translation table size is limited by what can be
transferred from one node to another via a full table request.

The number of entries fitting into a full table request depend
on whether the fragmentation is enabled or not. Therefore this
patch introduces a max table size check and refuses to add
more local clients when that size is reached. Moreover, if the
max full table packet size changes (MTU change or fragmentation
is disabled) the local table is downsized instantaneously.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-10-23 17:03:43 +02:00
Antonio Quartulli 4627456a77 batman-adv: adapt the TT component to use the new API functions
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 17:03:42 +02:00
Antonio Quartulli d0015fdd3d batman-adv: provide orig_node routing API
Some operations executed on an orig_node depends on the
current routing algorithm being used. To easily make this
mechanism routing algorithm agnostic add a orig_node
specific API that each algorithm can populate with its own
routines.

Such routines are then invoked by the code when needed,
without knowing which routing algorithm is currently in use

With this patch 3 API functions are added:
- orig_free (to free routing depending internal structs)
- orig_add_if (to change the inner state of an orig_node
  when a new hard interface is added)
- orig_del_if (to change the inner state of an orig_node
  when an hard interface is removed)

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 17:03:21 +02:00
Antonio Quartulli 81e26b1a1c batman-adv: adapt the neighbor purging routine to use the new API functions
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 15:33:12 +02:00
Antonio Quartulli 6680a1249f batman-adv: adapt bonding to use the new API functions
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 15:33:12 +02:00
Antonio Quartulli c43c981e50 batman-adv: add bat_neigh_is_equiv_or_better API function
Each routing protocol has its own metric semantic and
therefore is the protocol itself the only component able to
compare two metrics to check their "similarity".

This new API allows each routing protocol to implement its
own logic and make the external code protocol agnostic.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 15:33:11 +02:00
Antonio Quartulli a3285a8f20 batman-adv: add bat_neigh_cmp API function
This new API allows to compare the two neighbours based on
the metric avoiding the user to deal with any routing
algorithm specific detail

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 15:33:10 +02:00
Antonio Quartulli 737a2a2297 batman-adv: add bat_orig_print API function
Each routing protocol has its own metric and private
variables, therefore it is useful to introduce a new API
for originator information printing.

This API needs to be implemented by each protocol in order
to provide its specific originator table output.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 15:33:10 +02:00
Antonio Quartulli bbad0a5e36 batman-adv: make struct batadv_orig_node algorithm agnostic
some of the struct batadv_orig_node members are B.A.T.M.A.N. IV
specific and therefore they are moved in a algorithm specific
substruct in order to make batadv_orig_node routing algorithm
agnostic

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 15:33:09 +02:00
Antonio Quartulli 0538f75991 batman-adv: make struct batadv_neigh_node algorithm agnostic
some of the fields in struct batadv_neigh_node are strictly
related to the B.A.T.M.A.N. IV algorithm. In order to
make the struct usable by any routing algorithm it has to be
split and made more generic

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23 15:33:08 +02:00
Stanislav Fomichev f2020b27be netfilter: ip6t_REJECT: skip checksum verification for outgoing ipv6 packets
Don't verify checksum for outgoing packets because checksum calculation
may be done by the device.

Without this patch:
$ ip6tables -I OUTPUT -p tcp --dport 80 -j REJECT --reject-with tcp-reset
$ time telnet ipv6.google.com 80
Trying 2a00:1450:4010:c03::67...
telnet: Unable to connect to remote host: Connection timed out

real    0m7.201s
user    0m0.000s
sys     0m0.000s

With the patch applied:
$ ip6tables -I OUTPUT -p tcp --dport 80 -j REJECT --reject-with tcp-reset
$ time telnet ipv6.google.com 80
Trying 2a00:1450:4010:c03::67...
telnet: Unable to connect to remote host: Connection refused

real    0m0.085s
user    0m0.000s
sys     0m0.000s

Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-23 11:20:00 +02:00
Linus Lüssing 454594f3b9 Revert "bridge: only expire the mdb entry when query is received"
While this commit was a good attempt to fix issues occuring when no
multicast querier is present, this commit still has two more issues:

1) There are cases where mdb entries do not expire even if there is a
querier present. The bridge will unnecessarily continue flooding
multicast packets on the according ports.

2) Never removing an mdb entry could be exploited for a Denial of
Service by an attacker on the local link, slowly, but steadily eating up
all memory.

Actually, this commit became obsolete with
"bridge: disable snooping if there is no querier" (b00589af3b)
which included fixes for a few more cases.

Therefore reverting the following commits (the commit stated in the
commit message plus three of its follow up fixes):

====================
Revert "bridge: update mdb expiration timer upon reports."
This reverts commit f144febd93.
Revert "bridge: do not call setup_timer() multiple times"
This reverts commit 1faabf2aab.
Revert "bridge: fix some kernel warning in multicast timer"
This reverts commit c7e8e8a8f7.
Revert "bridge: only expire the mdb entry when query is received"
This reverts commit 9f00b2e7cf.
====================

CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Reviewed-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22 14:41:02 -04:00
ZHAO Gang 0a6957e7d4 net: remove function sk_reset_txq()
What sk_reset_txq() does is just calls function sk_tx_queue_reset(),
and sk_reset_txq() is used only in sock.h, by dst_negative_advice().
Let dst_negative_advice() calls sk_tx_queue_reset() directly so we
can remove unneeded sk_reset_txq().

Signed-off-by: ZHAO Gang <gamerh2o@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22 14:00:21 -04:00
Andy Zhou 1bd7116f1c openvswitch: collect mega flow mask stats
Collect mega flow mask stats. ovs-dpctl show command can be used to
display them for debugging and performance tuning.

Signed-off-by: Andy Zhou <azhou@nicira.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-10-22 10:42:46 -07:00
Jozsef Kadlecsik 1a869205c7 netfilter: ipset: The unnamed union initialization may lead to compilation error
The unnamed union should be possible to be initialized directly, but
unfortunately it's not so:

/usr/src/ipset/kernel/net/netfilter/ipset/ip_set_hash_netnet.c: In
function ?hash_netnet4_kadt?:
/usr/src/ipset/kernel/net/netfilter/ipset/ip_set_hash_netnet.c:141:
error: unknown field ?cidr? specified in initializer

Reported-by: Husnu Demir <hdemir@metu.edu.tr>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-22 10:14:01 +02:00
Jozsef Kadlecsik 93302880d8 netfilter: ipset: Use netlink callback dump args only
Instead of cb->data, use callback dump args only and introduce symbolic
names instead of plain numbers at accessing the argument members.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-22 10:13:59 +02:00
Will Deacon b416c144f4 netfilter: x_tables: fix ordering of jumpstack allocation and table update
During kernel stability testing on an SMP ARMv7 system, Yalin Wang
reported the following panic from the netfilter code:

  1fe0: 0000001c 5e2d3b10 4007e779 4009e110 60000010 00000032 ff565656 ff545454
  [<c06c48dc>] (ipt_do_table+0x448/0x584) from [<c0655ef0>] (nf_iterate+0x48/0x7c)
  [<c0655ef0>] (nf_iterate+0x48/0x7c) from [<c0655f7c>] (nf_hook_slow+0x58/0x104)
  [<c0655f7c>] (nf_hook_slow+0x58/0x104) from [<c0683bbc>] (ip_local_deliver+0x88/0xa8)
  [<c0683bbc>] (ip_local_deliver+0x88/0xa8) from [<c0683718>] (ip_rcv_finish+0x418/0x43c)
  [<c0683718>] (ip_rcv_finish+0x418/0x43c) from [<c062b1c4>] (__netif_receive_skb+0x4cc/0x598)
  [<c062b1c4>] (__netif_receive_skb+0x4cc/0x598) from [<c062b314>] (process_backlog+0x84/0x158)
  [<c062b314>] (process_backlog+0x84/0x158) from [<c062de84>] (net_rx_action+0x70/0x1dc)
  [<c062de84>] (net_rx_action+0x70/0x1dc) from [<c0088230>] (__do_softirq+0x11c/0x27c)
  [<c0088230>] (__do_softirq+0x11c/0x27c) from [<c008857c>] (do_softirq+0x44/0x50)
  [<c008857c>] (do_softirq+0x44/0x50) from [<c0088614>] (local_bh_enable_ip+0x8c/0xd0)
  [<c0088614>] (local_bh_enable_ip+0x8c/0xd0) from [<c06b0330>] (inet_stream_connect+0x164/0x298)
  [<c06b0330>] (inet_stream_connect+0x164/0x298) from [<c061d68c>] (sys_connect+0x88/0xc8)
  [<c061d68c>] (sys_connect+0x88/0xc8) from [<c000e340>] (ret_fast_syscall+0x0/0x30)
  Code: 2a000021 e59d2028 e59de01c e59f011c (e7824103)
  ---[ end trace da227214a82491bd ]---
  Kernel panic - not syncing: Fatal exception in interrupt

This comes about because CPU1 is executing xt_replace_table in response
to a setsockopt syscall, resulting in:

	ret = xt_jumpstack_alloc(newinfo);
		--> newinfo->jumpstack = kzalloc(size, GFP_KERNEL);

	[...]

	table->private = newinfo;
	newinfo->initial_entries = private->initial_entries;

Meanwhile, CPU0 is handling the network receive path and ends up in
ipt_do_table, resulting in:

	private = table->private;

	[...]

	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];

On weakly ordered memory architectures, the writes to table->private
and newinfo->jumpstack from CPU1 can be observed out of order by CPU0.
Furthermore, on architectures which don't respect ordering of address
dependencies (i.e. Alpha), the reads from CPU0 can also be re-ordered.

This patch adds an smp_wmb() before the assignment to table->private
(which is essentially publishing newinfo) to ensure that all writes to
newinfo will be observed before plugging it into the table structure.
A dependent-read barrier is also added on the consumer sides, to ensure
the same ordering requirements are also respected there.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reported-by: Wang, Yalin <Yalin.Wang@sonymobile.com>
Tested-by: Wang, Yalin <Yalin.Wang@sonymobile.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-22 10:11:29 +02:00
Neal Cardwell 02cf4ebd82 tcp: initialize passive-side sk_pacing_rate after 3WHS
For passive TCP connections, upon receiving the ACK that completes the
3WHS, make sure we set our pacing rate after we get our first RTT
sample.

On passive TCP connections, when we receive the ACK completing the
3WHS we do not take an RTT sample in tcp_ack(), but rather in
tcp_synack_rtt_meas(). So upon receiving the ACK that completes the
3WHS, tcp_ack() leaves sk_pacing_rate at its initial value.

Originally the initial sk_pacing_rate value was 0, so passive-side
connections defaulted to sysctl_tcp_min_tso_segs (2 segs) in skbuffs
made in the first RTT. With a default initial cwnd of 10 packets, this
happened to be correct for RTTs 5ms or bigger, so it was hard to
see problems in WAN or emulated WAN testing.

Since 7eec4174ff ("pkt_sched: fq: fix non TCP flows pacing"), the
initial sk_pacing_rate is 0xffffffff. So after that change, passive
TCP connections were keeping this value (and using large numbers of
segments per skbuff) until receiving an ACK for data.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:56:23 -04:00
Hannes Frederic Sowa c2f17e827b ipv6: probe routes asynchronous in rt6_probe
Routes need to be probed asynchronous otherwise the call stack gets
exhausted when the kernel attemps to deliver another skb inline, like
e.g. xt_TEE does, and we probe at the same time.

We update neigh->updated still at once, otherwise we would send to
many probes.

Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:56:22 -04:00
Eric Dumazet 61c1db7fae ipv6: sit: add GSO/TSO support
Now ipv6_gso_segment() is stackable, its relatively easy to
implement GSO/TSO support for SIT tunnels

Performance results, when segmentation is done after tunnel
device (as no NIC is yet enabled for TSO SIT support) :

Before patch :

lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

 87380  16384  16384    10.00      3168.31   4.81     4.64     2.988   2.877

After patch :

lpq84:~# ./netperf -H 2002:af6:1153:: -Cc
MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

 87380  16384  16384    10.00      5525.00   7.76     5.17     2.763   1.840

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:49:39 -04:00
Eric Dumazet d3e5e0062d ipv6: gso: make ipv6_gso_segment() stackable
In order to support GSO on SIT tunnels, we need to make
inet_gso_segment() stackable.

It should not assume network header starts right after mac
header.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:49:39 -04:00
Eric W. Biederman fd2d5356d9 ipv4: Allow unprivileged users to use per net sysctls
Allow unprivileged users to use:
/proc/sys/net/ipv4/icmp_echo_ignore_all
/proc/sys/net/ipv4/icmp_echo_ignore_broadcasts
/proc/sys/net/ipv4/icmp_ignore_bogus_error_response
/proc/sys/net/ipv4/icmp_errors_use_inbound_ifaddr
/proc/sys/net/ipv4/icmp_ratelimit
/proc/sys/net/ipv4/icmp_ratemask
/proc/sys/net/ipv4/ping_group_range
/proc/sys/net/ipv4/tcp_ecn
/proc/sys/net/ipv4/ip_local_ports_range

These are occassionally handy and after a quick review I don't see
any problems with unprivileged users using them.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:43:03 -04:00
Eric W. Biederman 0a6fa23dcb ipv4: Use math to point per net sysctls into the appropriate struct net.
Simplify maintenance of ipv4_net_table by using math to point the per
net sysctls into the appropriate struct net, instead of manually
reassinging all of the variables into hard coded table slots.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:43:02 -04:00
Eric W. Biederman 2e685cad57 tcp_memcontrol: Kill struct tcp_memcontrol
Replace the pointers in struct cg_proto with actual data fields and kill
struct tcp_memcontrol as it is not fully redundant.

This removes a confusing, unnecessary layer of abstraction.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:43:02 -04:00
Eric W. Biederman a4fe34bf90 tcp_memcontrol: Remove the per netns control.
The code that is implemented is per memory cgroup not per netns, and
having per netns bits is just confusing.  Remove the per netns bits to
make it easier to see what is really going on.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:43:02 -04:00
Eric W. Biederman f594d63199 tcp_memcontrol: Remove setting cgroup settings via sysctl
The code is broken and does not constrain sysctl_tcp_mem as
tcp_update_limit does.  With the result that it allows the cgroup tcp
memory limits to be bypassed.

The semantics are broken as the settings are not per netns and are in a
per netns table, and instead looks at current.

Since the code is broken in both design and implementation and does not
implement the functionality for which it was written remove it.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:43:02 -04:00
Eric W. Biederman cd91cce620 tcp_memcontrol: Remove tcp_max_memory
This function is never called. Remove it.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:43:02 -04:00
Julian Anastasov 56e42441ed netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper
Now when rt6_nexthop() can return nexthop address we can use it
for proper nexthop comparison of directly connected destinations.
For more information refer to commit bbb5823cf7
("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper").

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:37:01 -04:00
Julian Anastasov 550bab42f8 ipv6: fill rt6i_gateway with nexthop address
Make sure rt6i_gateway contains nexthop information in
all routes returned from lookup or when routes are directly
attached to skb for generated ICMP packets.

The effect of this patch should be a faster version of
rt6_nexthop() and the consideration of local addresses as
nexthop.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-21 18:37:01 -04:00
Gustavo Padovan d78a32a8fc Bluetooth: Remove sk member from struct l2cap_chan
There is no access to chan->sk in L2CAP core now. This change marks the
end of the task of splitting L2CAP between Core and Socket, thus sk is now
gone from struct l2cap_chan.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 13:50:56 -07:00
Gustavo Padovan 7f5396a774 Bluetooth: Use bt_cb(skb)->chan to send raw data back
Instead of accessing skb->sk in L2CAP core we now compare the channel
a skb belongs to and not send it back if the channel is same. This change
removes another struct socket usage from L2CAP core.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 13:50:55 -07:00
Gustavo Padovan 0e790c64f3 Bluetooth: Add L2CAP channel to skb private data
Adding the channel to the skb private data makes possible to us know which
channel the skb we have came from.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 13:50:55 -07:00
Gustavo Padovan 8ffb929098 Bluetooth: Remove parent socket usage from l2cap_core.c
The parent socket is not used inside the L2CAP core anymore. We only lock
it to indirect access through the new_connection() callback. The hold of
the socket lock was moved to the new_connection() callback.

Inside L2CAP core the channel lock is now used in l2cap_le_conn_ready()
and l2cap_conn_ready() to protect the execution of these two functions
during the handling of new incoming connections.

This change remove the socket lock usage from L2CAP core while keeping
the code safe against race conditions.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 12:58:17 -07:00
Gustavo Padovan f93fa27323 Bluetooth: Remove socket lock from l2cap_state_change()
This simplify and make safer the state change handling inside l2cap_core.c.
we got rid of __l2cap_state_change(). And l2cap_state_change() doesn't lock
the socket anymore, instead the socket is locked inside the ops callback for
state change in l2cap_sock.c.

It makes the code safer because in some we were using a unlocked version,
and now we are calls to l2cap_state_change(), when dealing with sockets, use
the locked version.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 12:58:17 -07:00
Gustavo Padovan acdcabf532 Bluetooth: Hold socket in defer callback in L2CAP socket
In both places that we use the defer callback the socket lock is held for
a indirect sk access inside __l2cap_change_state() and chan->ops->defer(),
all the rest of the code between lock_sock() and release_sock() is
already protected by the channel lock and won't be affected by this
change.

We now use l2cap_change_state(), the locked version of the change state
function, and the defer callback does the locking itself now. This does
not affect other uses of the defer callback.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 12:58:17 -07:00
Gustavo Padovan 0f2c615374 Bluetooth: Do not access chan->sk directly
In the process of removing socket usage from L2CAP we now access the L2CAP
socket from the data member of struct l2cap_chan. For the L2CAP socket
user the data member points to the L2CAP socket.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 12:58:16 -07:00
Gustavo Padovan d42970f319 Bluetooth: Remove not used struct sock
It is a leftover from the recent effort of remove sk usage from L2CAP
core.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 12:58:16 -07:00
Johan Hedberg 547003b114 Bluetooth: Fix enabling fast connectable on LE-only controllers
The current "fast connectable" feature is BR/EDR-only, so add a proper
check for BR/EDR support before proceeding with the associated HCI
commands.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21 07:18:27 -07:00
Michal Kazior bbe09bbcf4 cfg80211: update dfs_state_entered upon dfs_state change
The timestamp wasn't updated after transitioning
to the NL80211_DFS_USABLE state after NOP time.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21 14:50:27 +02:00
Michal Kazior c532a58b0f cfg80211: fix DFS channel recovery timeout
The timeout was not properly converted from msecs
to jiffies. As a result channel transition to
NL80211_DFS_USABLE was delayed depending on
CONFIG_HZ configuration, e.g. HZ=100 would delay
the NOP from 30 minutes to 300 minutes.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21 14:50:27 +02:00
Johannes Berg 79845c662e cfg80211: fix scheduled scan pointer access
Since rdev->sched_scan_req is dereferenced outside the
lock protecting it, this might be done at the wrong
time, causing crashes. Move the dereference to where
it should be - inside the RTNL locked section.

Cc: stable@vger.kernel.org [3.8+]
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-21 11:59:15 +02:00
Steffen Klassert 4d53eff48b xfrm: Don't queue retransmitted packets if the original is still on the host
It does not make sense to queue retransmitted packets if the
original packet is still in some queue of this host. So add
a check to xdst_queue_output() and drop the packet if the
original packet is not yet sent.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Eric Dumazet <edumazet@google.com>
2013-10-21 09:45:20 +02:00
Eric Dumazet 5cf4eb54c2 xfrm: use vmalloc_node() for percpu scratches
scratches are per cpu, we can use vmalloc_node() for proper
NUMA affinity.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-21 09:38:24 +02:00
Johan Hedberg 9a43e25fff Bluetooth: Update Set Discoverable to support LE
This patch updates the Set Discoverable management command to also be
applicable for LE. In particular this affects the advertising flags
where we can say "general discoverable" or "limited discoverable".

Since the device flags may not be up-to-date when the advertising data
is written this patch introduces a get_adv_discov_flags() helper
function which also looks at any pending mgmt commands (a pending
set_discoverable would be the exception when the flags are not yet
correct).

The patch also adds HCI_DISCOVERABLE flag clearing to the
mgmt_discoverable_timeout function, since the code was previously
relying on the mgmt_discoverable callback to handle this, which is only
called for the BR/EDR-only HCI_Write_Scan_Enable command.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:41 -07:00
Johan Hedberg b456f87cb0 Bluetooth: Move HCI_LIMITED_DISCOVERABLE changes to a general place
We'll soon be introducing also LE support for the Set Discoverable
management command, so move the HCI_LIMITED_DISCOVERABLE flag clearing
and setting out from the if-branch that is only used for a BR/EDR
specific HCI command.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:41 -07:00
Johan Hedberg 4b580614e1 Bluetooth: Fix sending write_scan_enable when BR/EDR is disabled
We should only send the HCI_Write_Scan_Enable command from
mgmt_set_powered_failed() when BR/EDR support is enabled. This is
particularly important when the discoverable setting is also tied to LE.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:40 -07:00
Johan Hedberg eb2a8d202f Bluetooth: Move mgmt_pending_find to avoid forward declarations
We will soon need this function for updating the advertising data, so
move it higher up in mgmt.c to avoid a forward declaration.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:40 -07:00
Johan Hedberg a81070ba37 Bluetooth: Fix updating settings when there are no HCI commands to send
It is possible that the Set Connectable management command doesn't cause
any HCI commands to send (such as when BR/EDR is disabled). We can't
just send a response to user space in this case but must also update the
necessary device flags and settings. This patch fixes the issue by using
the recently introduced set_connectable_update_settings function.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:40 -07:00
Johan Hedberg e8ba3a1f08 Bluetooth: Refactor set_connectable settings update to separate function
We will need to directly update the device flags and notify user space
of the new settings not just when we're powered off but also if it turns
out that there are no HCI commands to send (which can happen in
particular when BR/EDR is disabled). Since this is a considerable amount
of code, refactor it to a separate function so it can be reused for the
"no HCI commands to send" case.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:40 -07:00
Johan Hedberg f87ea1dabb Bluetooth: Add missing check for BREDR_ENABLED flag in update_class()
We shouldn't be sending the HCI_Write_Class_Of_Device command when
BR/EDR is disabled since this is a BR/EDR-only command.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:40 -07:00
Johan Hedberg 10994ce6e6 Bluetooth: Check for flag instead of features in update_adv_data()
It's better to check for the device flag instead of device features so
that we avoid unnecessary HCI commands when the feature is supported but
disabled (i.e. the flag is unset).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:40 -07:00
Johan Hedberg 7751ef1b31 Bluetooth: Check for flag instead of features in update_scan_rsp_data()
It's better to check for the device flag instead of device features so
that we avoid unnecessary HCI commands when the feature is supported but
disabled (i.e. the flag is unset).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-20 09:05:40 -07:00
David S. Miller 5bf47256f5 Included changed:
- email addresses update in documentation, source files and MAINTAINERS
 - make the TT component distinguish non-mesh clients based on the VLAN they
   belong to
 - improve all the internal components to properly work on a per-VLAN basis
   (enabled by the new TT-VLAN feature)
 - enhance the sysfs interface in order to provide behaviour switches on a
   per-VLAN basis (enabled by the new TT-VLAN feature)
 - improve TT lock mechanism
 - improve unicast transmission APIs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJSYvnjAAoJEADl0hg6qKeOGFAQAK+P3XkProP+MWhgpQzWDc+F
 TCVvi3eQ9NKVzxVnglRTznEVqXePVArK9oWb39KbCeguoqsuo7T8I+oNK06qPCH6
 1aodkBqJLq0OT1EWIxMo+1eOHCevRRqBjS1Jh0DMxuugMsKZZu3/DrHK59ay/4y7
 8wRb8CqQrKpILsh43cKRm9SPNJj0nmFPIwoWmgu++ffPyfIPMnBHSowMEgxqJ3h4
 Vp4adjJQU2D3qa1Vln99MYzdJaUhRDVDjxdAroCbuk6M1bl9o88UjhFxRvZJN8JN
 HdxiMN1hvlDJ7OsiBGw42RROnibyqkui8BZl5hP85sjbKSSU9lCqMJ1XWW+gVNhx
 sKA7LIm7NPNW9Ysvgd3FhjX/cg18WgjC2HHU26uMhYmGrGUfP8eBw55XidabApgb
 TpGhKjFxhYqfGnPhAtarsqLYfxWh6vbb1G6cyaC5jJ4baIa5YKqt8tejHCNiFJLI
 WrVnmi0TJfGjdoULfUdkBOx/pI6zyZ3PWPISbIDUIslQXrnEzKUj37VbN3N0Qlj1
 QcVcC+iVd3/gJ/dnvKzmeGjsm2nKK5eEwewRtNuPkQSaM13/dN2CUQ4/+/6BSY1D
 wODn+Wc5zCoi8sxvVb7TcT+NLO27QkH0REJh4W9KxJx9NSws0BfiVBcTKPFCra+x
 gMsgNYNdgoCTLQBNj8KK
 =sEEg
 -----END PGP SIGNATURE-----

Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Antonio Quartulli says:

====================
this is another batch intended for net-next/linux-3.13.

This pull request is a bit bigger than usual, but 6 patches are very small
(three of them are about email updates)..

Patch 1 is fixing a previous merge conflict resolution that went wrong
(I realised that only now while checking other patches..).
Patches from 2 to 4 that are updating our emails in all the proper files
(Documentation/, headers and MAINTAINERS).

Patches 5, 6 and 7 are bringing a big improvement to the TranslationTable
component: it is now able to group non-mesh clients based on the VLAN they
belong to. In this way a lot a new enhancements are now possible thanks to the
fact that each batman-adv behaviour can be applied on a per VLAN basis.

And, of course, in patches from 8 to 12 you have some of the enhancements I was
talking about:
- make the batman-Gateway selection VLAN dependent
- make DAT (Distributed ARP Table) group ARP entries on a VLAN basis (this
  allows DAT to work even when the admin decided to use the same IP subnet on
  different VLANs)
- make the AP-Isolation behaviour switchable on each VLAN independently
- export VLAN specific attributes via sysfs. Switches like the AP-Isolation are
  now exported once per VLAN (backward compatibility of the sysfs interface has
  been preserved)

Patches 13 and 14 are small code cleanups.
Patch 15 is a minor improvement in the TT locking mechanism.

Patches 16 and 17 are other enhancements to the TT component. Those allow a
node to parse a "non-mesh client announcement message" and accept only those
TT entries belonging to certain VLANs.

Patch 18 exploits this parse&accept mechanism to make the Bridge Loop Avoidance
component reject only TT entries connected to the VLAN where it is operating.
Previous to this change, BLA was rejecting all the entries coming from any other
Backbone node, regardless of the VLAN (for more details about how the Bridge
Loop Avoidance works please check [1]).

[1] http://www.open-mesh.org/projects/batman-adv/wiki/Bridge-loop-avoidance-II
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:52:42 -04:00
Hannes Frederic Sowa e34c9a6997 net: switch net_secret key generation to net_get_random_once
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:36 -04:00
Hannes Frederic Sowa 222e83d2e0 tcp: switch tcp_fastopen key generation to net_get_random_once
Changed key initialization of tcp_fastopen cookies to net_get_random_once.

If the user sets a custom key net_get_random_once must be called at
least once to ensure we don't overwrite the user provided key when the
first cookie is generated later on.

Cc: Yuchung Cheng <ycheng@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:35 -04:00
Hannes Frederic Sowa 1bbdceef1e inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once
Initialize the ehash and ipv6_hash_secrets with net_get_random_once.

Each compilation unit gets its own secret now:
  ipv4/inet_hashtables.o
  ipv4/udp.o
  ipv6/inet6_hashtables.o
  ipv6/udp.o
  rds/connection.o

The functions still get inlined into the hashing functions. In the fast
path we have at most two (needed in ipv6) if (unlikely(...)).

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:35 -04:00
Hannes Frederic Sowa b23a002fc6 inet: split syncookie keys for ipv4 and ipv6 and initialize with net_get_random_once
This patch splits the secret key for syncookies for ipv4 and ipv6 and
initializes them with net_get_random_once. This change was the reason I
did this series. I think the initialization of the syncookie_secret is
way to early.

Cc: Florian Westphal <fw@strlen.de>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:35 -04:00
Hannes Frederic Sowa a48e42920f net: introduce new macro net_get_random_once
net_get_random_once is a new macro which handles the initialization
of secret keys. It is possible to call it in the fast path. Only the
initialization depends on the spinlock and is rather slow. Otherwise
it should get used just before the key is used to delay the entropy
extration as late as possible to get better randomness. It returns true
if the key got initialized.

The usage of static_keys for net_get_random_once is a bit uncommon so
it needs some further explanation why this actually works:

=== In the simple non-HAVE_JUMP_LABEL case we actually have ===
no constrains to use static_key_(true|false) on keys initialized with
STATIC_KEY_INIT_(FALSE|TRUE). So this path just expands in favor of
the likely case that the initialization is already done. The key is
initialized like this:

___done_key = { .enabled = ATOMIC_INIT(0) }

The check

                if (!static_key_true(&___done_key))                     \

expands into (pseudo code)

                if (!likely(___done_key > 0))

, so we take the fast path as soon as ___done_key is increased from the
helper function.

=== If HAVE_JUMP_LABELs are available this depends ===
on patching of jumps into the prepared NOPs, which is done in
jump_label_init at boot-up time (from start_kernel). It is forbidden
and dangerous to use net_get_random_once in functions which are called
before that!

At compilation time NOPs are generated at the call sites of
net_get_random_once. E.g. net/ipv6/inet6_hashtable.c:inet6_ehashfn (we
need to call net_get_random_once two times in inet6_ehashfn, so two NOPs):

      71:       0f 1f 44 00 00          nopl   0x0(%rax,%rax,1)
      76:       0f 1f 44 00 00          nopl   0x0(%rax,%rax,1)

Both will be patched to the actual jumps to the end of the function to
call __net_get_random_once at boot time as explained above.

arch_static_branch is optimized and inlined for false as return value and
actually also returns false in case the NOP is placed in the instruction
stream. So in the fast case we get a "return false". But because we
initialize ___done_key with (enabled != (entries & 1)) this call-site
will get patched up at boot thus returning true. The final check looks
like this:

                if (!static_key_true(&___done_key))                     \
                        ___ret = __net_get_random_once(buf,             \

expands to

                if (!!static_key_false(&___done_key))                     \
                        ___ret = __net_get_random_once(buf,             \

So we get true at boot time and as soon as static_key_slow_inc is called
on the key it will invert the logic and return false for the fast path.
static_key_slow_inc will change the branch because it got initialized
with .enabled == 0. After static_key_slow_inc is called on the key the
branch is replaced with a nop again.

=== Misc: ===
The helper defers the increment into a workqueue so we don't
have problems calling this code from atomic sections. A seperate boolean
(___done) guards the case where we enter net_get_random_once again before
the increment happend.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:35 -04:00
Hannes Frederic Sowa b50026b5ac ipv6: split inet6_ehashfn to hash functions per compilation unit
This patch splits the inet6_ehashfn into separate ones in
ipv6/inet6_hashtables.o and ipv6/udp.o to ease the introduction of
seperate secrets keys later.

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:34 -04:00
Hannes Frederic Sowa 65cd8033ff ipv4: split inet_ehashfn to hash functions per compilation unit
This duplicates a bit of code but let's us easily introduce
separate secret keys later. The separate compilation units are
ipv4/inet_hashtabbles.o, ipv4/udp.o and rds/connection.o.

Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:45:34 -04:00
Eric Dumazet cb32f511a7 ipip: add GSO/TSO support
Now inet_gso_segment() is stackable, its relatively easy to
implement GSO/TSO support for IPIP

Performance results, when segmentation is done after tunnel
device (as no NIC is yet enabled for TSO IPIP support) :

Before patch :

lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

 87380  16384  16384    10.00      3357.88   5.09     3.70     2.983   2.167

After patch :

lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

 87380  16384  16384    10.00      7710.19   4.52     6.62     1.152   1.687

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:36:19 -04:00
Eric Dumazet 3347c96029 ipv4: gso: make inet_gso_segment() stackable
In order to support GSO on IPIP, we need to make
inet_gso_segment() stackable.

It should not assume network header starts right after mac
header.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:36:18 -04:00
Eric Dumazet 2d26f0a3c0 ipv4: generalize gre_handle_offloads
This patch makes gre_handle_offloads() more generic
and rename it to iptunnel_handle_offloads()

This will be used to add GSO/TSO support to IPIP tunnels.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:36:18 -04:00
Eric Dumazet 030737bcc3 net: generalize skb_segment()
While implementing GSO/TSO support for IPIP, I found skb_segment()
was assuming network header was immediately following mac header.

Its not really true in the case inet_gso_segment() is stacked :
By the time tcp_gso_segment() is called, network header points
to the inner IP header.

Let's instead assume nothing and pick the current offsets found in
original skb, we have skb_headers_offset_update() helper for that.

Also move the csum_start update inside skb_headers_offset_update()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:36:18 -04:00
Jiri Pirko e93b7d748b ip_output: do skb ufo init for peeked non ufo skb as well
Now, if user application does:
sendto len<mtu flag MSG_MORE
sendto len>mtu flag 0
The skb is not treated as fragmented one because it is not initialized
that way. So move the initialization to fix this.

introduced by:
commit e89e9cf539 "[IPv4/IPv6]: UFO Scatter-gather approach"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:20:52 -04:00
Jiri Pirko c547dbf55d ip6_output: do skb ufo init for peeked non ufo skb as well
Now, if user application does:
sendto len<mtu flag MSG_MORE
sendto len>mtu flag 0
The skb is not treated as fragmented one because it is not initialized
that way. So move the initialization to fix this.

introduced by:
commit e89e9cf539 "[IPv4/IPv6]: UFO Scatter-gather approach"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:20:52 -04:00
Jiri Pirko e36d3ff911 udp6: respect IPV6_DONTFRAG sockopt in case there are pending frames
if up->pending != 0 dontfrag is left with default value -1. That
causes that application that do:
sendto len>mtu flag MSG_MORE
sendto len>mtu flag 0
will receive EMSGSIZE errno as the result of the second sendto.

This patch fixes it by respecting IPV6_DONTFRAG socket option.

introduced by:
commit 4b340ae20d "IPv6: Complete IPV6_DONTFRAG support"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:20:52 -04:00
Eric Dumazet b917eb155c ipv6: gso: remove redundant locking
ipv6_gso_send_check() and ipv6_gso_segment() are called by
skb_mac_gso_segment() under rcu lock, no need to use
rcu_read_lock() / rcu_read_unlock()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:14:14 -04:00
Joe Perches c1b1203d65 net: misc: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:12:11 -04:00
Joe Perches 7e58487b8c net: ipv4/ipv6: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:12:11 -04:00
Joe Perches a402a5aa9b net: dccp: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:12:11 -04:00
Joe Perches 348662a142 net: 8021q/bluetooth/bridge/can/ceph: Remove extern from function prototypes
There are a mix of function prototypes with and without extern
in the kernel sources.  Standardize on not using extern for
function prototypes.

Function prototypes don't need to be written with extern.
extern is assumed by the compiler.  Its use is as unnecessary as
using auto to declare automatic/local variables in a block.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:12:11 -04:00
Eric Dumazet 47d27aad44 ipv4: gso: send_check() & segment() cleanups
inet_gso_segment() and inet_gso_send_check() are called by
skb_mac_gso_segment() under rcu lock, no need to use
rcu_read_lock() / rcu_read_unlock()

Avoid calling ip_hdr() twice per function.

We can use ip_send_check() helper.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 19:11:56 -04:00
Daniel Borkmann 90c6bd34f8 net: unix: inherit SOCK_PASS{CRED, SEC} flags from socket to fix race
In the case of credentials passing in unix stream sockets (dgram
sockets seem not affected), we get a rather sparse race after
commit 16e5726 ("af_unix: dont send SCM_CREDENTIALS by default").

We have a stream server on receiver side that requests credential
passing from senders (e.g. nc -U). Since we need to set SO_PASSCRED
on each spawned/accepted socket on server side to 1 first (as it's
not inherited), it can happen that in the time between accept() and
setsockopt() we get interrupted, the sender is being scheduled and
continues with passing data to our receiver. At that time SO_PASSCRED
is neither set on sender nor receiver side, hence in cmsg's
SCM_CREDENTIALS we get eventually pid:0, uid:65534, gid:65534
(== overflow{u,g}id) instead of what we actually would like to see.

On the sender side, here nc -U, the tests in maybe_add_creds()
invoked through unix_stream_sendmsg() would fail, as at that exact
time, as mentioned, the sender has neither SO_PASSCRED on his side
nor sees it on the server side, and we have a valid 'other' socket
in place. Thus, sender believes it would just look like a normal
connection, not needing/requesting SO_PASSCRED at that time.

As reverting 16e5726 would not be an option due to the significant
performance regression reported when having creds always passed,
one way/trade-off to prevent that would be to set SO_PASSCRED on
the listener socket and allow inheriting these flags to the spawned
socket on server side in accept(). It seems also logical to do so
if we'd tell the listener socket to pass those flags onwards, and
would fix the race.

Before, strace:

recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}],
        msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET,
        cmsg_type=SCM_CREDENTIALS{pid=0, uid=65534, gid=65534}},
        msg_flags=0}, 0) = 5

After, strace:

recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}],
        msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET,
        cmsg_type=SCM_CREDENTIALS{pid=11580, uid=1000, gid=1000}},
        msg_flags=0}, 0) = 5

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19 18:50:15 -04:00
Antonio Quartulli cfd4f75701 batman-adv: make the backbone gw check VLAN specific
The backbone gw check has to be VLAN specific so that code
using it can specify VID where the check has to be done.

In the TT code, the check has been moved into the
tt_global_add() function so that it can be performed on a
per-entry basis instead of ignoring all the TT data received
from another backbone node. Only TT global entries belonging
to the VLAN where the backbone node is connected to are
skipped.
All the other spots where the TT code was checking whether a
node is a backbone have been removed.

Moreover, batadv_bla_is_backbone_gw_orig() now returns bool
since it used to return only 1 or 0.

Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 23:25:38 +02:00
Antonio Quartulli 95fb130d68 batman-adv: make the TT global purge routine VLAN specific
Instead of unconditionally removing all the TT entries
served by a given originator, make tt_global_orig_del()
remove only entries matching a given VLAN identifier
provided as argument.

If such argument is negative all the global entries
served by the originator are removed.

This change is used into the BLA code to purge entries
served by a newly discovered Backbone node, but limiting
the operation only to those connected to the VLAN where the
backbone has been discovered.

Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 23:25:37 +02:00
Antonio Quartulli 7ea7b4a142 batman-adv: make the TT CRC logic VLAN specific
This change allows nodes to handle the TT table on a
per-VLAN basis. This is needed because nodes may have to
store only some of the global entries advertised by another
node.

In this scenario such nodes would re-create only a partial
global table and would not be able to compute a correct CRC
anymore.

This patch splits the logic and introduces one CRC per VLAN.
In this way a node fetching only some entries belonging to
some VLANs is still able to compute the needed CRCs and
still check the table correctness.

With this patch the shape of the TVLV-TT is changed too
because now a node needs to advertise all the CRCs of all
the VLANs that it is wired to.

The debug output of the local Translation Table now shows
the CRC along with each entry since there is not a common
value for the entire table anymore.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 23:25:12 +02:00
Greg Kroah-Hartman a7204d72db Merge 3.12-rc6 into driver-core-next
We want these fixes here too.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-19 13:05:38 -07:00
Marcel Holtmann 2be48b6542 Bluetooth: Fix minor coding style issue in hci_core.c
A few variable assignments ended up with missing a space between the
variable and equal sign.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 20:46:27 +03:00
Marcel Holtmann 58f01aa93f Bluetooth: Fix UUID values in debugfs file
The uuid entry struct is used for the UUID byte stream. That is
actually the wrong value. The correct value is uuid->uuid.

Besides fixing this up, use the %pUb modifier to print the UUID
string. However since the UUID is stored in big endian with
reversed byte order, change the byte order before printing.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 20:46:12 +03:00
Marcel Holtmann 4b4148e9ac Bluetooth: Add support for setting DUT mode
The Device Under Test (DUT) mode is useful for doing certification
testing and so expose this as debugfs option.

This mode is actually special since you can only enter it. Restoring
normal operation means that a HCI Reset is required. The current mode
value gets tracked as a new device flag and when disabling it, the
correct command to reset the controller is sent.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 18:56:56 +03:00
Marcel Holtmann 4e70c7e71c Bluetooth: Expose debugfs settings for LE connection interval
For testing purposes expose the default LE connection interval values
via debugfs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 18:56:54 +03:00
Marcel Holtmann 06f5b7785a Bluetooth: Add support for setting SSP debug mode
Enabling and disabling SSP debug mode is useful for development. This
adds a debugfs entry that allows to configure the SSP debug mode.

On purpose this has been implemented as debugfs entry and not a public
API since it is really only useful during testing and development.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 18:56:52 +03:00
Antonio Quartulli a70a9aa990 batman-adv: lock around TT operations to avoid sending inconsistent data
A TT response may be prepared and sent while the local or
global translation table is getting updated.

The worst case is when one of the tables is accessed after
its content has been recently updated but the metadata
(TTVN/CRC) has not yet. In this case the reader will get a
table content which does not match the TTVN/CRC.
This will lead to an inconsistent state and so to a TT
recovery.

To avoid entering this situation, put a lock around those TT
operations recomputing the metadata and around the TT
Response creation (the latter is the only reader that
accesses the metadata together with the table).

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:31:56 +02:00
Antonio Quartulli e75de4fa41 batman-adv: remove bogus comment
this comment refers to the old batmand codebase and does
not make sense anymore. Remove it

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:31:55 +02:00
Linus Lüssing e300d31466 batman-adv: refine API calls for unicast transmissions of SKBs
With this patch the functions batadv_send_skb_unicast() and
batadv_send_skb_unicast_4addr() are further refined into
batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and
batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send
a packet in the unicast forwarding methods and let the callers decide.

This is going to be useful for the upcoming multicast related patches in
particular.

Further, the return values were polished a little to use the more
appropriate NET_XMIT_* defines.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19 17:31:54 +02:00
Antonio Quartulli b8cbd81d09 batman-adv: make the AP isolation attribute VLAN specific
AP isolation has to be enabled on one VLAN interface only.
This patch moves the AP isolation attribute to the per-vlan
interface attribute set, enabling it to have a different
value depending on the selected vlan.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:28:47 +02:00
Antonio Quartulli 90f4435da4 batman-adv: add sysfs framework for VLAN
Each VLAN can now have its own set of attributes which are
exported through a new subfolder in the sysfs tree.
Each VLAN created on top of a soft_iface will have its own
subfolder.

The subfolder is named "vlan%VID" and it is created inside
the "mesh" sysfs folder belonging to batman-adv.

Attributes corresponding to the untagged LAN are stored in
the root sysfs folder as before.

This patch also creates all the needed macros and data
structures to easily handle new VLAN spacific attributes.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:28:42 +02:00
Antonio Quartulli 5d2c05b213 batman-adv: add per VLAN interface attribute framework
Since batman-adv is now fully VLAN-aware, a proper framework
able to handle per-vlan-interface attributes is needed.

Those attributes will affect the associated VLAN interface
only, rather than the real soft_iface (which would result
in every vlan interface having the same attribute
configuration).

To make the code simpler and easier to extend, attributes
associated to the standalone soft_iface are now treated
like belonging to yet another vlan having a special vid.
This vid is different from the others because it is made up
by all zeros and the VLAN_HAS_TAG bit is not set.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:28:08 +02:00
Antonio Quartulli be1db4f661 batman-adv: make the Distributed ARP Table vlan aware
The same IP subnet can be used on different VLANs, therefore
DAT has to differentiate whether the IP to resolve belongs
to one or the other virtual LAN.
To accomplish this task DAT has to deal with the VLAN tag
and store it together with each ARP entry.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:28:07 +02:00
Antonio Quartulli bbb877ed77 batman-adv: make the GW module correctly talk to the new VLAN-TT
The gateway code is now adapted in order to correctly
interact with the Translation Table component by using the
vlan ID

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 17:27:11 +02:00
Marcel Holtmann 3497ac84bd Bluetooth: Remove interval parameter from HCI connection
The conn->interval parameter of HCI connections is not used at all
and so just remove it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:50:05 +03:00
Marcel Holtmann cfbb2b5b91 Bluetooth: Add LE features to debugfs if available
For LE capable controllers at the special LE features page to the
debugfs list with all the other features pages.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:49:54 +03:00
Marcel Holtmann 12c269d7e3 Bluetooth: Expose setting if debug keys are used or not
The system can be figured to accept and use debug keys. Expose this
value in debugfs for debugging purposes.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:30:44 +03:00
Marcel Holtmann 922021854b Bluetooth: Expose debugfs entry read/write own address type
For some testing it is important to know the current own addres type,
but also be able to change it. The change is lost over powery cycles
and only intended for debugging.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:29:03 +03:00
Marcel Holtmann 79830f66e3 Bluetooth: Select the own address type during initial setup phase
The own address type is based on the fact if the controller has
a public address or not. This means that this detail can be just
configured once during setup phase.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:28:06 +03:00
Marcel Holtmann 8f8625cd80 Bluetooth: Expose current list of long term keys via debugfs
For debugging purposes expose the current list of long term keys
via debugfs. This file is read-only and limited to root access.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:26:20 +03:00
Marcel Holtmann d0f729b8c1 Bluetooth: Expose white list size information in debugfs
Knowing the white list size information is important for
debugging. So export it via debugfs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:26:10 +03:00
Marcel Holtmann e132f7f6a2 Bluetooth: Remove bus attribute in favor of hierarchy
The bus information are exposed in the actual hierarchy and should
not be exposed as attribute.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:25:55 +03:00
Marcel Holtmann 02d08d15e0 Bluetooth: Expose current list of link keys via debugfs
For debugging purposes expose the current list of link keys via
debugfs. This file is read-only and limited to root access.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:24:50 +03:00
Marcel Holtmann babdbb3c13 Bluetooth: Move export of class of device information into hci_core.c
The class of device debugfs information should be directly exported
from hci_core.c and so move them over there.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:24:27 +03:00
Marcel Holtmann 0d5551f5e4 Bluetooth: Store local version information only during setup phase
The local version information from the controller can not change
since they are static. So store them only once during setup
phase and not bother overwriting them every time this command
gets executed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:24:09 +03:00
Marcel Holtmann ceeb3bc0f1 Bluetooth: Move manufacturer, hci_ver and hci_rev into hci_core.c
Move the debugfs entries for manufacturer, hci_ver and hci_rev into
hci_core.c and use the new helpers for static entries that will not
change at runtime. Once passed the setup procedure, they will stay
fixed.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:23:51 +03:00
Marcel Holtmann f96bc0a7f4 Bluetooth: Remove debug entry for connection features
The debug entry for connection features is incomplete and also does
not work with AMP controllers and physical links. So just remove it.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:23:34 +03:00
Marcel Holtmann 57af75a8cf Bluetooth: Add workaround for buggy max_page features page value
Some controllers list the max_page value from the extended features
response as 0 when SSP has not yet been enabled. To workaround this
issue, force the max_page value to 1 when SSP support has been
detected.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:22:52 +03:00
Marcel Holtmann dfb826a8b0 Bluetooth: Move HCI device features into hci_core.c
Move the handling of HCI device features debugfs into hci_core.c and
also extend it with handling of multiple feature pages.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-19 16:22:30 +03:00
Antonio Quartulli 1605278901 batman-adv: print the VID together with the TT entries
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 15:11:25 +02:00
Antonio Quartulli 0ffa9e8d86 batman-adv: use vid when computing local and global TT CRC
now that each TT entry is characterised by a VLAN ID, the
latter has to be taken into consideration when computing the
local/global table CRC as it would be theoretically possible
to have the same client in two different VLANs

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 15:11:24 +02:00
Antonio Quartulli c018ad3de6 batman-adv: add the VLAN ID attribute to the TT entry
To make the translation table code VLAN-aware, each entry
must carry the VLAN ID which it belongs to. This patch adds
such attribute to the related TT structures.

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19 15:11:21 +02:00
Marek Lindner bc58eeef74 batman-adv: update email address for Marek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19 14:53:48 +02:00
Simon Wunderlich c679ff8fb2 batman-adv: update email address for Simon Wunderlich
My university will stop email service for alumni in january 2014, please
use my new e-mail address instead.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-19 14:53:41 +02:00
Antonio Quartulli 33faa04547 batman-adv: check skb preparation return value
Fix bogus merge conflict resolution by checking the return
values of the skb preparation routines.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19 14:46:32 +02:00
stephen hemminger b1eda2ac3f em_ipset: use dev_net() accessor
Randy found that if network namespace not enabled then
nd_net does not exist and would cause compilation failure.

This is handled correctly by using the dev_net() macro.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 16:23:06 -04:00
Neal Cardwell 675297c904 tcp: remove redundant code in __tcp_retransmit_skb()
Remove the specialized code in __tcp_retransmit_skb() that tries to trim
any ACKed payload preceding a FIN before we retransmit (this was added
in 1999 in v2.2.3pre3). This trimming code was made unreachable by the
more general code added above it that uses tcp_trim_head() to trim any
ACKed payload, with or without a FIN (this was added in "[NET]: Add
segmentation offload support to TCP." in 2002 circa v2.5.33).

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 16:22:00 -04:00
Toshiaki Makita dfb5fa32c6 bridge: Fix updating FDB entries when the PVID is applied
We currently set the value that variable vid is pointing, which will be
used in FDB later, to 0 at br_allowed_ingress() when we receive untagged
or priority-tagged frames, even though the PVID is valid.
This leads to FDB updates in such a wrong way that they are learned with
VID 0.
Update the value to that of PVID if the PVID is applied.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 16:02:53 -04:00
Toshiaki Makita d1c6c708c4 bridge: Fix the way the PVID is referenced
We are using the VLAN_TAG_PRESENT bit to detect whether the PVID is
set or not at br_get_pvid(), while we don't care about the bit in
adding/deleting the PVID, which makes it impossible to forward any
incomming untagged frame with vlan_filtering enabled.

Since vid 0 cannot be used for the PVID, we can use vid 0 to indicate
that the PVID is not set, which is slightly more efficient than using
the VLAN_TAG_PRESENT.

Fix the problem by getting rid of using the VLAN_TAG_PRESENT.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 16:02:53 -04:00
Toshiaki Makita b90356ce17 bridge: Apply the PVID to priority-tagged frames
IEEE 802.1Q says that when we receive priority-tagged (VID 0) frames
use the PVID for the port as its VID.
(See IEEE 802.1Q-2011 6.9.1 and Table 9-2)

Apply the PVID to not only untagged frames but also priority-tagged frames.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 16:02:53 -04:00
Toshiaki Makita 8adff41c3d bridge: Don't use VID 0 and 4095 in vlan filtering
IEEE 802.1Q says that:
- VID 0 shall not be configured as a PVID, or configured in any Filtering
Database entry.
- VID 4095 shall not be configured as a PVID, or transmitted in a tag
header. This VID value may be used to indicate a wildcard match for the VID
in management operations or Filtering Database entries.
(See IEEE 802.1Q-2011 6.9.1 and Table 9-2)

Don't accept adding these VIDs in the vlan_filtering implementation.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 16:02:52 -04:00
Joe Perches 9877b25382 fib: Use const struct nl_info * in rtmsg_fib
The rtmsg_fib function doesn't modify this argument so mark
it const.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 14:42:15 -04:00
Luis R. Rodriguez 03f27120fb cfg80211: export reg_initiator_name()
Drivers can now use this to parse the regulatory request and
be more verbose when needed.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18 14:04:40 -04:00
John W. Linville df3c2adea4 This is the first NFC pull request for the 3.13 kernel.
It's a fairly big one, with the following highlights:
 
 - NFC digital layer implementation: Most NFC chipsets implement the NFC
   digital layer in firmware, but others have more basic functionalities
   and expect the host to implement the digital layer. This layer sits
   below the NFC core.
 
 - Sony's port100 support: This is "soft" NFC USB dongle that expects the
   digital layer to be implemented on the host. This is the first user of
   our NFC digital stack implementation.
 
 - Secure element API: We now provide a netlink API for enabling,
   disabling and discovering NFC attached (embedded or UICC ones) secure
   elements. With some userspace help, this allows us to support NFC
   payments.
   Only the pn544 driver currently supports that API.
 
 - NCI SPI fixes and improvements: In order to support NCI devices over
   SPI, we fixed and improved our NCI/SPI implementation. The currently
   most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
   and we're planning to use our NCI/SPI framework to implement a
   driver for it.
 
 - pn533 fragmentation support in target mode: This was the only missing
   feature from our pn533 impementation. We now support fragmentation in
   both Tx and Rx modes, in target mode.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSUqvzAAoJEIqAPN1PVmxKKHEP/1mK8kWx9ZZ8egkrkzaTw4lW
 J9uJq2kTGv5tfEfWjuigAhz5kHB6qLTJLx8FEBZAHazLfa4Az0Zm2G7I7+GTQAMV
 Mw+uAAI22GGnNgdTNzXDAqgS76Eul2PiWf2UwAbKFZWiyEj5Vf/eZBJAS9nTKLM3
 En37wBjvMpVgj6ZwOHKsqPR801NSa3HiM653tkmgSsk3QVL3b7s+kynSuAtshsmA
 twzymUoJFfYePVnQNRnT3PVPR6w0tRNs4vdq8j5UUuoj1vgKC0/h6nIz2aCURwyE
 j1pQlSy4ykASM8QZNI2jv3VaOFxmASig2GOgzvCeBZOmCBdlNq13ZY/T0SmmiYES
 LTbg6Pmh5BXID95GqcFcJaC+iS+QNZK+RWhNYmj+JWCuqZ9Qcja3++IoQ7m/pAip
 WfyQsO7lD7wPhXUu4IMxfyKNu8u4nCiHdBMp7TBVXiWIVUMxIcoM0auNW4O1qSvW
 eLq0f1oqQXE9hIrJ4oYUZmn9D5CKRLIXr9SVcmat+VxmV/+jFgV5cMQIGRdDAEUq
 4g5g7Avbpkkccn9wdFaIm0VpxMebaNFSWVfBOw4L7PF56lqns6shBcq3W3OvDf60
 /Tn0oe9Qqvr17xarJackFkF8beBkJaKOJv9M5+KjlVgGexcNMMTIiwj8aPl6+mqC
 t5n6tCp0g941jB3qAV2G
 =K1A5
 -----END PGP SIGNATURE-----

Merge tag 'nfc-next-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next

Samuel Ortiz <sameo@linux.intel.com> says:

"This is the first NFC pull request for the 3.13 kernel.
It's a fairly big one, with the following highlights:

- NFC digital layer implementation: Most NFC chipsets implement the NFC
  digital layer in firmware, but others have more basic functionalities
  and expect the host to implement the digital layer. This layer sits
  below the NFC core.

- Sony's port100 support: This is "soft" NFC USB dongle that expects the
  digital layer to be implemented on the host. This is the first user of
  our NFC digital stack implementation.

- Secure element API: We now provide a netlink API for enabling,
  disabling and discovering NFC attached (embedded or UICC ones) secure
  elements. With some userspace help, this allows us to support NFC
  payments.
  Only the pn544 driver currently supports that API.

- NCI SPI fixes and improvements: In order to support NCI devices over
  SPI, we fixed and improved our NCI/SPI implementation. The currently
  most deployed NFC NCI chipset, Broadcom's bcm2079x, supports that mode
  and we're planning to use our NCI/SPI framework to implement a
  driver for it.

- pn533 fragmentation support in target mode: This was the only missing
  feature from our pn533 impementation. We now support fragmentation in
  both Tx and Rx modes, in target mode."

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18 13:59:28 -04:00
John W. Linville b231070a18 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next 2013-10-18 13:56:17 -04:00
Dan Carpenter 768877537d ax25: cleanup a range test
The current test works fine in practice.  The "amount" variable is
actually used as a boolean so negative values or any non-zero values
count as "true".  However since we don't allow numbers greater than one,
let's not allow negative numbers either.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:56:07 -04:00
baker.zhang 77dfca7e45 fib_trie: remove duplicated rcu lock
fib_table_lookup has included the rcu lock protection.

Signed-off-by: baker.zhang <baker.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:53:59 -04:00
David S. Miller 9aaf0435b4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
1) Don't use a wildcard SA if a more precise one is in acquire state,
   from Fan Du.

2) Simplify the SA lookup when using wildcard source. We need to check
   only the destination in this case, from Fan Du.

3) Add a receive path hook for IPsec virtual tunnel interfaces
   to xfrm6_mode_tunnel.

4) Add support for IPsec virtual tunnel interfaces to ipv6.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:51:35 -04:00
Eric Dumazet 28be6e07e8 tcp: rename tcp_tso_segment()
Rename tcp_tso_segment() to tcp_gso_segment(), to better reflect
what is going on, and ease grep games.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:38:39 -04:00
John W. Linville 334300f247 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2013-10-18 13:35:39 -04:00
Erik Hugne bbfbe47cc9 tipc: simplify the link lookup routine
When checking statistics or changing parameters on a link, the
link_find_link function is used to locate the link with a given
name. The complex method of deconstructing the name into local
and remote address/interface is error prone and may fail if the
interface names contains special characters. We change the lookup
method to iterate over the list of nodes and compare the link
names.

Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:43 -04:00
Ying Xue 636c0371a7 tipc: correct return value of link_cmd_set_value routine
link_cmd_set_value() takes commands for link, bearer and media related
configuration. Genereally the function returns 0 when a command is
recognized, and -EINVAL when it is not. However, in the switch for link
related commands it returns 0 even when the command is unrecognized. This
will sometimes make it look as if a failed configuration command has been
successful, but has otherwise no negative effects.

We remove this anomaly by returning -EINVAL even for link commands. We also
rework all three switches to make them  conforming to common kernel coding
style.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:43 -04:00
Ying Xue 6798158348 tipc: correct return value of recv_msg routine
Currently, rcv_msg() always returns zero on a packet delivery upcall
from net_device.

To make its behavior more compliant with the way this API should be
used, we change this to let it return NET_RX_SUCCESS (which is zero
anyway) when it is able to handle the packet, and NET_RX_DROP otherwise.
The latter does not imply any functional change, it only enables the
driver to keep more accurate statistics about the fate of delivered
packets.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:43 -04:00
Ying Xue f2875c3cc4 tipc: avoid unnecessary lookup for tipc bearer instance
tipc_block_bearer() currently takes a bearer name (const char*)
as argument. This requires the function to make a lookup to find
the pointer to the corresponding bearer struct. In the current
code base this is not necessary, since the only two callers
(tipc_continue(),recv_notification()) already have validated
copies of this pointer, and hence can pass it directly in the
function call.

We change tipc_block_bearer() to directly take struct tipc_bearer*
as argument instead.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:43 -04:00
Ying Xue 4babbaa8a1 tipc: make bearer and media naming consistent
TIPC 'bearer' exists as an abstract concept, while 'media'
is deemed a specific implementation of a bearer, such as Ethernet
or Infiniband media. When a component inside TIPC wants to control
a specific media, it only needs to access the generic bearer API
to achieve this. However, in the current media implementations,
the 'bearer' name is also extensively used in media specific
function and variable names.

This may create confusion, so we choose to replace the term 'bearer'
with 'media' in all function names, variable names, and prefixes
where this is what really is meant.

Note that this change is cosmetic only, and no runtime behaviour
changes are made here.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:43 -04:00
Ying Xue 4068243208 tipc: silence sparse warnings
Eliminate below sparse warnings:

net/tipc/link.c:1210:37: warning: cast removes address space of expression
net/tipc/link.c:1218:59: warning: incorrect type in argument 2 (different address spaces)
net/tipc/link.c:1218:59:    expected void const [noderef] <asn:1>*from
net/tipc/link.c:1218:59:    got unsigned char const [usertype] *[assigned] sect_crs
net/tipc/socket.c:341:49: warning: Using plain integer as NULL pointer
net/tipc/socket.c:1371:36: warning: Using plain integer as NULL pointer
net/tipc/socket.c:1694:57: warning: Using plain integer as NULL pointer

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Andreas Bofjäll <andreas.bofjall@ericsson.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:42 -04:00
Ying Xue 9446b87add tipc: remove iovec length parameter from all sending functions
tipc_msg_build() now copies message data from iovec to skb_buff
using memcpy_fromiovecend(), which doesn't need to be passed the
iovec length to perform the copying.

So we remove the parameter indicating iovec length in all
functions where TIPC messages are built and sent.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:42 -04:00
Ying Xue 5c0a0fc81f tipc: don't use memcpy to copy from user space
tipc_msg_build() calls skb_copy_to_linear_data_offset() to copy data
from user space to kernel space. However, the latter function does
in its turn call memcpy() to perform the actual copying. This poses
an obvious security and robustness risk, since memcpy() never makes
any validity check on the pointer it is copying from.

To correct this, we the replace the offending function call with
a call to memcpy_fromiovecend(), which uses copy_from_user() to
perform the copying.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 13:20:42 -04:00
Marcel Holtmann cc8dba2bc3 Bluetooth: Block ATT connection on LE when device is blocked
When the remote LE device is blocked, then do not create a L2CAP
channel for it. Without a channel, all packets for that connection
will be dropped.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 14:43:22 +03:00
Marcel Holtmann 06ae3314e0 Bluetooth: Use hcon directly instead of conn->hcon where possible
When the HCI connection hcon is already dereferenced, then use hcon
directly instead of conn->hcon.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 14:37:01 +03:00
Marcel Holtmann e71f41bc7f Bluetooth: Use BDADDR_BREDR type for old blacklist ioctl interface
The old blacklist ioctl interface was only able to operate on BR/EDR
addresses. So use the BDADDR_BREDR address type definition instead
of an open coded magic 0 value.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 12:26:47 +03:00
Johan Hedberg eb622495e8 Bluetooth: Fix ATT socket backwards compatibility with user space
Old user space versions bind the Attribute Protocol socket to
BDADDR_BREDR when they should be using BDADDR_LE_PUBLIC or
BDADDR_LE_RANDOM. The kernel recently introduced stricter checks on the
socket parameters but we need to punch this hole for old user space
versions to keep them working.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-18 01:53:57 -07:00
Michal Kubecek 12e3594698 xfrm: prevent ipcomp scratch buffer race condition
In ipcomp_compress(), sortirq is enabled too early, allowing the
per-cpu scratch buffer to be rewritten by ipcomp_decompress()
(called on the same CPU in softirq context) between populating
the buffer and copying the compressed data to the skb.

v2: as pointed out by Steffen Klassert, if we also move the
local_bh_disable() before reading the per-cpu pointers, we can
get rid of get_cpu()/put_cpu().

v3: removed ipcomp_decompress part (as explained by Herbert Xu,
it cannot be called from process context), get rid of cpu
variable (thanks to Eric Dumazet)

Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-18 10:00:00 +02:00
Marcel Holtmann 2bfa3531f6 Bluetooth: Move idle_timeout and sniff_{min,max}_interval to hci_core.c
Move the debugfs configuration directly into hci_core.c and only expose
it when the controller actually support BR/EDR sniff power saving mode.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:50:37 +03:00
Marcel Holtmann b25f078547 Bluetooth: Include address type in blacklist debugfs data
The address type is important for the blacklist entries. So include
it at well.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:47:33 +03:00
Marcel Holtmann bdc3e0f1d2 Bluetooth: Move device_add handling into hci_register_dev
The device_add handling can be done directly in hci_register_dev and
device_remove within hci_unregister_dev.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:46:54 +03:00
Marcel Holtmann ffcecac6a7 Bluetooth: Create root debugfs directory during module init
Create the root Bluetooth debugfs directory during module init
and remove it on module exit.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:46:27 +03:00
Marcel Holtmann 0153e2ecab Bluetooth: Create HCI device debugfs directory in hci_register_dev
Create the debugfs directory for each HCI device directly in
hci_register_dev function and remove it during hci_unregister_dev.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:45:45 +03:00
Marcel Holtmann 1120e4bfa5 Bluetooth: Use IS_ERR_OR_NULL for checking bt_debugfs
Make sure to use IS_ERR_OR_NULL for checking the existing of the root
debugfs dentry bt_debugfs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:45:19 +03:00
Marcel Holtmann 47219839b4 Bluetooth: Move uuids debugfs entry creation into hci_core.c
The uuids debugfs should only be created together with the other
entries after the setup procedure has been finished.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:44:35 +03:00
Marcel Holtmann 70afe0b856 Bluetooth: Move blacklist debugfs entry creation into hci_core.c
The blacklist debugfs should only be created together with the other
entries after the setup procedure has been finished.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:26:58 +03:00
Marcel Holtmann b9ee0a783a Bluetooth: Add address type to device blacklist table
The device blacklist is not taking care of the address type. Actually
store the address type in the list entries and also use them when
looking up addresses in the table.

This is actually a serious bug. When adding a LE public address to
the blacklist, then it would be blocking a device on BR/EDR. And this
is not the expected behavior.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18 10:21:28 +03:00
Eric Dumazet 400dfd3ae8 net: refactor sk_page_frag_refill()
While working on virtio_net new allocation strategy to increase
payload/truesize ratio, we found that refactoring sk_page_frag_refill()
was needed.

This patch splits sk_page_frag_refill() into two parts, adding
skb_page_frag_refill() which can be used without a socket.

While we are at it, add a minimum frag size of 32 for
sk_page_frag_refill()

Michael will either use netdev_alloc_frag() from softirq context,
or skb_page_frag_refill() from process context in refill_work()
 (GFP_KERNEL allocations)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Dalton <mwdalton@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18 00:08:51 -04:00
Marcel Holtmann 041000b942 Bluetooth: Expose current voice setting in debugfs
For easier debugging of the current voice setting, expose the value
in debugfs if the controller is BR/EDR capable.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-17 23:55:58 +03:00
Marcel Holtmann e7b8fc9286 Bluetooth: Expose static address value for LE capable controllers
For LE capable controllers, the static address can be configured. For
debugging purposes expose the value in debugfs.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-17 23:55:07 +03:00
Marcel Holtmann ebd1e33bb2 Bluetooth: Expose auto_accept_delay debugfs only when SSP is supported
The auto_accept_delay debugfs entry is only valid for BR/EDR capable
controllers that also support SSP. If SSP is not available or it is
a LE-only single mode controller this value has no affect and so do
not expose it.

Since the value can be actually changed, switch the permissions
to 0644 to clearly indicate that the value is indeed writeable.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-17 23:54:07 +03:00
David S. Miller 5cda73b68e Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
This is a batch of updates intended for the 3.13 stream...

The biggest item of interest in here is wcn36xx, the new mac80211
driver for Qualcomm WCN3660/WCN3680 hardware.

Regarding the mac80211 bits, Johannes says:

"We have an assortment of cleanups and new features, of which the
biggest one is probably the channel-switch support in IBSS. Nothing
else really stands out much."

On top of that, the ath9k and rt2x00 get a lot of update action from
Felix Fietkau and Gabor Juhos, respectively.  There are a handful of
updates to other drivers here and there as well.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:14:29 -04:00
Vlad Yasevich 4b6c7879d8 bridge: Correctly clamp MAX forward_delay when enabling STP
Commit be4f154d5e
	bridge: Clamp forward_delay when enabling STP
had a typo when attempting to clamp maximum forward delay.

It is possible to set bridge_forward_delay to be higher then
permitted maximum when STP is off.  When turning STP on, the
higher then allowed delay has to be clamed down to max value.

CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Veaceslav Falico <vfalico@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:12:15 -04:00
Eric Dumazet 0baf2b35fc ipv4: shrink rt_cache_stat
Half of the rt_cache_stat fields are no longer used after IP
route cache removal, lets shrink this per cpu area.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:11:04 -04:00
Eric Dumazet 8f26fb1c1e tcp: remove the sk_can_gso() check from tcp_set_skb_tso_segs()
sk_can_gso() should only be used as a hint in tcp_sendmsg() to build GSO
packets in the first place. (As a performance hint)

Once we have GSO packets in write queue, we can not decide they are no
longer GSO only because flow now uses a route which doesn't handle
TSO/GSO.

Core networking stack handles the case very well for us, all we need
is keeping track of packet counts in MSS terms, regardless of
segmentation done later (in GSO or hardware)

Right now, if  tcp_fragment() splits a GSO packet in two parts,
@left and @right, and route changed through a non GSO device,
both @left and @right have pcount set to 1, which is wrong,
and leads to incorrect packet_count tracking.

This problem was added in commit d5ac99a648 ("[TCP]: skb pcount with MTU
discovery")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:08:08 -04:00
Eric Dumazet c52e2421f7 tcp: must unclone packets before mangling them
TCP stack should make sure it owns skbs before mangling them.

We had various crashes using bnx2x, and it turned out gso_size
was cleared right before bnx2x driver was populating TC descriptor
of the _previous_ packet send. TCP stack can sometime retransmit
packets that are still in Qdisc.

Of course we could make bnx2x driver more robust (using
ACCESS_ONCE(shinfo->gso_size) for example), but the bug is TCP stack.

We have identified two points where skb_unclone() was needed.

This patch adds a WARN_ON_ONCE() to warn us if we missed another
fix of this kind.

Kudos to Neal for finding the root cause of this bug. Its visible
using small MSS.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:08:08 -04:00
David S. Miller df709a18ca Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
Please pull this batch of fixes intended for the 3.12 stream!

For the mac80211 bits, Johannes says:

"Jouni fixes a remain-on-channel vs. scan bug, and Felix fixes client TX
probing on VLANs."

And also:

"This time I have two fixes from Emmanuel for RF-kill issues, and fixed
two issues reported by Evan Huus and Thomas Lindroth respectively."

On top of those...

Avinash Patil adds a couple of mwifiex fixes to properly inform cfg80211
about some different types of disconnects, avoiding WARNINGs.

Mark Cave-Ayland corrects a pointer arithmetic problem in rtlwifi,
avoiding incorrect automatic gain calculations.

Solomon Peachy sends a cw1200 fix for locking around calls to
cw1200_irq_handler, addressing "lost interrupt" problems.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 16:05:50 -04:00
Yuchung Cheng 031afe4990 tcp: fix incorrect ca_state in tail loss probe
On receiving an ACK that covers the loss probe sequence, TLP
immediately sets the congestion state to Open, even though some packets
are not recovered and retransmisssion are on the way.  The later ACks
may trigger a WARN_ON check in step D of tcp_fastretrans_alert(), e.g.,
https://bugzilla.redhat.com/show_bug.cgi?id=989251

The fix is to follow the similar procedure in recovery by calling
tcp_try_keep_open(). The sender switches to Open state if no packets
are retransmissted. Otherwise it goes to Disorder and let subsequent
ACKs move the state to Recovery or Open.

Reported-By: Michael Sterrett <michael@sterretts.net>
Tested-By: Dormando <dormando@rydia.net>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:41:02 -04:00
Vlad Yasevich d2dbbba77e sctp: Perform software checksum if packet has to be fragmented.
IP/IPv6 fragmentation knows how to compute only TCP/UDP checksum.
This causes problems if SCTP packets has to be fragmented and
ipsummed has been set to PARTIAL due to checksum offload support.
This condition can happen when retransmitting after MTU discover,
or when INIT or other control chunks are larger then MTU.
Check for the rare fragmentation condition in SCTP and use software
checksum calculation in this case.

CC: Fan Du <fan.du@windriver.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:24:44 -04:00
Fan Du 27127a8256 sctp: Use software crc32 checksum when xfrm transform will happen.
igb/ixgbe have hardware sctp checksum support, when this feature is enabled
and also IPsec is armed to protect sctp traffic, ugly things happened as
xfrm_output checks CHECKSUM_PARTIAL to do checksum operation(sum every thing
up and pack the 16bits result in the checksum field). The result is fail
establishment of sctp communication.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Fan Du <fan.du@windriver.com>
Signed-off-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:24:44 -04:00
David S. Miller da33edcceb Merge branch 'net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nftables
Pablo Neira Ayuso says:

====================
netfilter updates: nf_tables pull request

The following patchset contains the current original nf_tables tree
condensed in 17 patches. I have organized them by chronogical order
since the original nf_tables code was released in 2009 and by
dependencies between the different patches.

The patches are:

1) Adapt all existing hooks in the tree to pass hook ops to the
   hook callback function, required by nf_tables, from Patrick McHardy.

2) Move alloc_null_binding to nf_nat_core, as it is now also needed by
   nf_tables and ip_tables, original patch from Patrick McHardy but
   required major changes to adapt it to the current tree that I made.

3) Add nf_tables core, including the netlink API, the packet filtering
   engine, expressions and built-in tables, from Patrick McHardy. This
   patch includes accumulated fixes since 2009 and minor enhancements.
   The patch description contains a list of references to the original
   patches for the record. For those that are not familiar to the
   original work, see [1], [2] and [3].

4) Add netlink set API, this replaces the original set infrastructure
   to introduce a netlink API to add/delete sets and to add/delete
   set elements. This includes two set types: the hash and the rb-tree
   sets (used for interval based matching). The main difference with
   ipset is that this infrastructure is data type agnostic. Patch from
   Patrick McHardy.

5) Allow expression operation overload, this API change allows us to
   provide define expression subtypes depending on the configuration
   that is received from user-space via Netlink. It is used by follow
   up patches to provide optimized versions of the payload and cmp
   expressions and the x_tables compatibility layer, from Patrick
   McHardy.

6) Add optimized data comparison operation, it requires the previous
   patch, from Patrick McHardy.

7) Add optimized payload implementation, it requires patch 5, from
   Patrick McHardy.

8) Convert built-in tables to chain types. Each chain type have special
   semantics (filter, route and nat) that are used by userspace to
   configure the chain behaviour. The main chain regarding iptables
   is that tables become containers of chain, with no specific semantics.
   However, you may still configure your tables and chains to retain
   iptables like semantics, patch from me.

9) Add compatibility layer for x_tables. This patch adds support to
   use all existing x_tables extensions from nf_tables, this is used
   to provide a userspace utility that accepts iptables syntax but
   used internally the nf_tables kernel core. This patch includes
   missing features in the nf_tables core such as the per-chain
   stats, default chain policy and number of chain references, which
   are required by the iptables compatibility userspace tool. Patch
   from me.

10) Fix transport protocol matching, this fix is a side effect of the
    x_tables compatibility layer, which now provides a pointer to the
    transport header, from me.

11) Add support for dormant tables, this feature allows you to disable
    all chains and rules that are contained in one table, from me.

12) Add IPv6 NAT support. At the time nf_tables was made, there was no
    NAT IPv6 support yet, from Tomasz Bursztyka.

13) Complete net namespace support. This patch register the protocol
    family per net namespace, so tables (thus, other objects contained
    in tables such as sets, chains and rules) are only visible from the
    corresponding net namespace, from me.

14) Add the insert operation to the nf_tables netlink API, this requires
    adding a new position attribute that allow us to locate where in the
    ruleset a rule needs to be inserted, from Eric Leblond.

15) Add rule batching support, including atomic rule-set updates by
    using rule-set generations. This patch includes a change to nfnetlink
    to include two new control messages to indicate the beginning and
    the end of a batch. The end message is interpreted as the commit
    message, if it's missing, then the rule-set updates contained in the
    batch are aborted, from me.

16) Add trace support to the nf_tables packet filtering core, from me.

17) Add ARP filtering support, original patch from Patrick McHardy, but
    adapted to fit into the chain type infrastructure. This was recovered
    to be used by nft userspace tool and our compatibility arptables
    userspace tool.

There is still work to do to fully replace x_tables [4] [5] but that can
be done incrementally by extending our netlink API. Moreover, looking at
netfilter-devel and the amount of contributions to nf_tables we've been
getting, I think it would be good to have it mainstream to avoid accumulating
large patchsets skip continuous rebases.

I tried to provide a reasonable patchset, we have more than 100 accumulated
patches in the original nf_tables tree, so I collapsed many of the small
fixes to the main patch we had since 2009 and provide a small batch for
review to netdev, while trying to retain part of the history.

For those who didn't give a try to nf_tables yet, there's a quick howto
available from Eric Leblond that describes how to get things working [6].

Comments/reviews welcome.

Thanks!

[1] http://lwn.net/Articles/324251/
[2] http://workshop.netfilter.org/2013/wiki/images/e/ee/Nftables-osd-2013-developer.pdf
[3] http://lwn.net/Articles/564095/
[4] http://people.netfilter.org/pablo/map-pending-work.txt
[4] http://people.netfilter.org/pablo/nftables-todo.txt
[5] https://home.regit.org/netfilter-en/nftables-quick-howto/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:22:05 -04:00
Eric Dumazet c1d607cc4a inet_diag: use sock_gen_put()
TCP listener refactoring, part 6 :

Use sock_gen_put() from inet_diag_dump_one_icsk() for future
SYN_RECV support.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17 15:02:02 -04:00
John W. Linville 9f96da4dd2 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2013-10-17 14:02:07 -04:00
Johannes Berg 095d81cee7 mac80211: disable WMM with invalid parameters
Some APs (notably a Sitecom WL-153 v1 with firmware 1.45) are sending
invalid WMM parameters setting AIFSN, ECWmin and ECWmax to zero. The
spec mandates that the value of AIFSN is at least 2, and some cards
(e.g. Intel with the iwldvm driver) can't transmit when the invalid
QoS parameters are actually uploaded to the firmware.

Since there's little chance of being able to guess the values that
the AP actually meant, disable WMM if such an invalid case is found.
Since ECWmin/ECWmax are allowed to be zero, only verify AIFSN >= 2
and ECWmin <= ECWmax.

Reviewed-by: Eliad Peller <eliad@wizery.com>
Reported-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-17 15:38:22 +02:00
Gao feng d86946d2c5 netfilter: ipt_CLUSTERIP: use proper net namespace to operate CLUSTERIP
we can allow users in uninit net namespace to operate ipt_CLUSTERIP
now.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-17 10:48:47 +02:00
Gao feng f58d786601 netfilter: ipt_CLUSTERIP: create proc entry under proper ipt_CLUSTERIP directory
Create proc entries under the ipt_CLUSTERIP directory of proper
net namespace.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-17 10:48:25 +02:00
Gao feng b5ef0f85bf netfilter: ipt_CLUSTERIP: add parameter net in clusterip_config_find_get
Inorder to find clusterip_config in net namespace.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-17 10:48:16 +02:00
Gao feng f1e8077f49 netfilter: ipt_CLUSTERIP: make clusterip_lock per net namespace
this lock is used for protecting clusterip_configs of per
net namespace, it should be per net namespace too.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-17 10:48:07 +02:00
Gao feng 26a89e4354 netfilter: ipt_CLUSTERIP: make clusterip_list per net namespace
clusterip_configs should be per net namespace, so operate
cluster in one net namespace won't affect other net
namespace. right now, only allow to operate the clusterip_configs
of init net namespace.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-17 10:47:58 +02:00
Gao feng ce4ff76c15 netfilter: ipt_CLUSTERIP: make proc directory per net namespace
Create /proc/net/ipt_CLUSTERIP directory for per net namespace.
Right now,only allow to create entries under the ipt_CLUSTERIP
in init net namespace.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-17 10:47:49 +02:00
Eric Dumazet 1a8bf6eeef netfilter: xt_socket: use sock_gen_put()
TCP listener refactoring, part 7 :

Use sock_gen_put() instead of xt_socket_put_sk() for future
SYN_RECV support.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-17 10:27:25 +02:00
Rusty Russell 855e0c5288 virtio: use size-based config accessors.
This lets the transport do endian conversion if necessary, and insulates
the drivers from the difference.

Most drivers can use the simple helpers virtio_cread() and virtio_cwrite().

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-10-17 10:55:37 +10:30
Alexei Starovoitov b07c26511e openvswitch: fix vport-netdev unregister
The combination of two commits:
commit 8e4e1713e4
("openvswitch: Simplify datapath locking.")
commit 2537b4dd0a
("openvswitch:: link upper device for port devices")

introduced a bug where upper_dev wasn't unlinked upon
netdev_unregister notification

The following steps:

  modprobe openvswitch
  ovs-dpctl add-dp test
  ip tuntap add dev tap1 mode tap
  ovs-dpctl add-if test tap1
  ip tuntap del dev tap1 mode tap

are causing multiple warnings:

[   62.747557] gre: GRE over IPv4 demultiplexor driver
[   62.749579] openvswitch: Open vSwitch switching datapath
[   62.755087] device test entered promiscuous mode
[   62.765911] device tap1 entered promiscuous mode
[   62.766033] IPv6: ADDRCONF(NETDEV_UP): tap1: link is not ready
[   62.769017] ------------[ cut here ]------------
[   62.769022] WARNING: CPU: 1 PID: 3267 at net/core/dev.c:5501 rollback_registered_many+0x20f/0x240()
[   62.769023] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[   62.769051] CPU: 1 PID: 3267 Comm: ip Not tainted 3.12.0-rc3+ #60
[   62.769052] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[   62.769053]  0000000000000009 ffff8807f25cbd28 ffffffff8175e575 0000000000000006
[   62.769055]  0000000000000000 ffff8807f25cbd68 ffffffff8105314c ffff8807f25cbd58
[   62.769057]  ffff8807f2634000 ffff8807f25cbdc8 ffff8807f25cbd88 ffff8807f25cbdc8
[   62.769059] Call Trace:
[   62.769062]  [<ffffffff8175e575>] dump_stack+0x55/0x76
[   62.769065]  [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[   62.769067]  [<ffffffff8105319a>] warn_slowpath_null+0x1a/0x20
[   62.769069]  [<ffffffff8162a04f>] rollback_registered_many+0x20f/0x240
[   62.769071]  [<ffffffff8162a101>] rollback_registered+0x31/0x40
[   62.769073]  [<ffffffff8162a488>] unregister_netdevice_queue+0x58/0x90
[   62.769075]  [<ffffffff8154f900>] __tun_detach+0x140/0x340
[   62.769077]  [<ffffffff8154fb36>] tun_chr_close+0x36/0x60
[   62.769080]  [<ffffffff811bddaf>] __fput+0xff/0x260
[   62.769082]  [<ffffffff811bdf5e>] ____fput+0xe/0x10
[   62.769084]  [<ffffffff8107b515>] task_work_run+0xb5/0xe0
[   62.769087]  [<ffffffff810029b9>] do_notify_resume+0x59/0x80
[   62.769089]  [<ffffffff813a41fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[   62.769091]  [<ffffffff81770f5a>] int_signal+0x12/0x17
[   62.769093] ---[ end trace 838756c62e156ffb ]---
[   62.769481] ------------[ cut here ]------------
[   62.769485] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
[   62.769486] sysfs: can not remove 'master', no directory
[   62.769486] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[   62.769514] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G        W    3.12.0-rc3+ #60
[   62.769515] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[   62.769518] Workqueue: events ovs_dp_notify_wq [openvswitch]
[   62.769519]  0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006
[   62.769521]  ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b28
[   62.769523]  0000000000000000 ffffffff81a87a1f ffff8807f2634000 ffff880037038500
[   62.769525] Call Trace:
[   62.769528]  [<ffffffff8175e575>] dump_stack+0x55/0x76
[   62.769529]  [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[   62.769531]  [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50
[   62.769533]  [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0
[   62.769535]  [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30
[   62.769538]  [<ffffffff81631ef7>] __netdev_adjacent_dev_remove+0xf7/0x150
[   62.769540]  [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50
[   62.769542]  [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50
[   62.769544]  [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140
[   62.769548]  [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch]
[   62.769550]  [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch]
[   62.769552]  [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch]
[   62.769555]  [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch]
[   62.769557]  [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0
[   62.769559]  [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0
[   62.769562]  [<ffffffff8107659b>] worker_thread+0x11b/0x370
[   62.769564]  [<ffffffff81076480>] ? rescuer_thread+0x350/0x350
[   62.769566]  [<ffffffff8107f44a>] kthread+0xea/0xf0
[   62.769568]  [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[   62.769570]  [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0
[   62.769572]  [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[   62.769573] ---[ end trace 838756c62e156ffc ]---
[   62.769574] ------------[ cut here ]------------
[   62.769576] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
[   62.769577] sysfs: can not remove 'upper_test', no directory
[   62.769577] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[   62.769603] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G        W    3.12.0-rc3+ #60
[   62.769604] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[   62.769606] Workqueue: events ovs_dp_notify_wq [openvswitch]
[   62.769607]  0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006
[   62.769609]  ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b58
[   62.769611]  0000000000000000 ffff880807ad3bd9 ffff8807f2634000 ffff880037038500
[   62.769613] Call Trace:
[   62.769615]  [<ffffffff8175e575>] dump_stack+0x55/0x76
[   62.769617]  [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[   62.769619]  [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50
[   62.769621]  [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0
[   62.769622]  [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30
[   62.769624]  [<ffffffff81631f22>] __netdev_adjacent_dev_remove+0x122/0x150
[   62.769627]  [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50
[   62.769629]  [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50
[   62.769631]  [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140
[   62.769633]  [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch]
[   62.769636]  [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch]
[   62.769638]  [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch]
[   62.769640]  [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch]
[   62.769642]  [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0
[   62.769644]  [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0
[   62.769646]  [<ffffffff8107659b>] worker_thread+0x11b/0x370
[   62.769648]  [<ffffffff81076480>] ? rescuer_thread+0x350/0x350
[   62.769650]  [<ffffffff8107f44a>] kthread+0xea/0xf0
[   62.769652]  [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[   62.769654]  [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0
[   62.769656]  [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[   62.769657] ---[ end trace 838756c62e156ffd ]---
[   62.769724] device tap1 left promiscuous mode

This patch also affects moving devices between net namespaces.

OVS used to ignore netns move notifications which caused problems.
Like:
  ovs-dpctl add-if test tap1
  ip link set tap1 netns 3512
and then removing tap1 inside the namespace will cause hang on missing dev_put.

With this patch OVS will detach dev upon receiving netns move event.

Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-10-16 14:50:22 -07:00
Marcel Holtmann baf27f6e0e Bluetooth: Expose inquiry_cache debugfs only on BR/EDR controllers
The inquiry_cache debugfs entry is only valid for BR/EDR capable
controllers. In case of single mode LE-only controllers that
entry is not valid.

Move the creating of the debugfs entries to the end of controller
init and only create the inquiry_cache entry if BR/EDR is actually
supported.

At the same time this avoids creating any debugfs entries for
AMP controllers since none of the entries are valid there.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16 19:53:18 +03:00
Marcel Holtmann 7f59ddada1 Bluetooth: Socket address parameter for CID is in little endian
The L2CAP socket parameter for CID are actually provided in little
endian. So convert our constants into little endian before comparing
them.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16 19:52:51 +03:00
Johan Hedberg a74a84f696 Bluetooth: Convert idle timer to use delayed work
There is no need to use a timer since the entire Bluetooth subsystem
runs using workqueues these days.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 09:12:13 -07:00
Johan Hedberg 7bc18d9d3d Bluetooth: Convert auto accept timer to use delayed work
Since the entire Bluetooth subsystem runs in workqueues these days there
is no need to use a timer for deferring work.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 09:12:12 -07:00
Johan Hedberg bfe4655f05 Bluetooth: Reintroduce socket restrictions for LE sockets
Right now we do not allow user space to use connection oriented channels
on LE, and the only CID that can be used is the Attribute Protocol one.
These restrictions went away together with the recent refactoring of the
L2CAP code, but this patch puts them back to their appropriate places.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 07:35:40 -07:00
Johan Hedberg eb438b5f30 Bluetooth: Fix updating the right variable in update_scan_rsp_data()
This function should be operating on scan_rsp_data_len and scan_rsp_data
and not the advertising data variables.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 07:02:14 -07:00
Johan Hedberg 3432711f49 Bluetooth: Ignore SMP data on non-LE links
The SMP CID is only defined for LE transports. Instead of returning an
error from smp_sig_channel() in this case (which would cause a
disconnection) just return 0 to ignore the data, which is consistent
with the behavior for other unknown CIDs.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 01:41:13 -07:00
Johan Hedberg 07e307f807 Bluetooth: Ignore A2MP data on non-BR/EDR links
The A2MP CID is only valid for BR/EDR transports. We should ignore A2MP
data on non-BR/EDR links and refuse to create an amp_mgr object.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 01:41:13 -07:00
Johan Hedberg a521149a0d Bluetooth: Remove useless l2cap_err_to_reason function
Now that the only reason code this function can return is
L2CAP_REJ_NOT_UNDERSTOOD we can just do the necessary assignment without
needing a separate function at all.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 01:22:55 -07:00
Johan Hedberg 33a2145e61 Bluetooth: Remove unused command reject mapping for EMSGSIZE
There is no command handler that would return an EMSGSIZE error, so just
remove this mapping from the l2cap_err_to_reason function.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 01:22:55 -07:00
Johan Hedberg 662d652dd6 Bluetooth: Fix L2CAP "Command Reject: Invalid CID" response
When the reason code in the L2CAP command reject is "invalid CID" there
should be four additional bytes of data in the PDU, namely the source
and destination CIDs (which should be zero if one or both are not
applicable). This patch fixes all occurrences of such errors to return
the right kind of PDU.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16 01:22:55 -07:00
Marcel Holtmann 5947f4bc42 Bluetooth: Rename update_ad into update_adv_data
Since there is update_scan_rsp_data, it is also better to use the
clear name update_adv_data instead of update_ad.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16 10:31:46 +03:00
Marcel Holtmann 7a5f4990a4 Bluetooth: Store device name in scan response data
The scan response data is a better place to store the device name
since it has more space available and is also enforcing privacy.

When the controller is advertising, the connectable setting decides
if ADV_IND or ADV_NONCONN_IND is used. In case of ADV_IND, the
remote side is allowed to request the scan response data. Same as
with BR/EDR where either EIR is used or a remote name request. In
non-connectable mode, the device name is not available since it is
not allowed to request scan response data. Same as in BR/EDR where
the device is non-discoverable and no name requests are answered.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16 10:31:42 +03:00
Marcel Holtmann f14d8f6437 Bluetooth: Set the scan response data when needed
On controller power on and when enabling LE functionality,
make sure that also the scan response data is correctly set.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16 10:31:24 +03:00
Marcel Holtmann f8e808bd68 Bluetooth: Store scan response data in HCI device
The scan response data needs to be stored in HCI device and so
add a buffer for it and also ensure to clear it when resetting
the controller.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16 10:30:05 +03:00
Marcel Holtmann 46cad2edb1 Bluetooth: Rename create_ad into create_adv_data
Rename the create_ad function into create_adv_data to make it clear
that it is used to create the advertising data. This is important
since later on a function adding the scan response data will be
added.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16 10:29:41 +03:00
Marcel Holtmann 083368f7b8 Bluetooth: Make mgmt_new_ltk() return void
The return value of mgmt_new_ltk() function is not used and
so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:54:57 -03:00
Marcel Holtmann 3edaf092c2 Bluetooth: Make mgmt_read_local_oob_data_reply_complete() return void
The return value of mgmt_read_local_oob_data_reply_complete() function
is not used and so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:54:49 -03:00
Marcel Holtmann 7667da3423 Bluetooth: Make mgmt_set_local_name_complete() return void
The return value of mgmt_set_local_name_complete() function is
not used and so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:54:34 -03:00
Marcel Holtmann 4e1b0245f2 Bluetooth: Make mgmt_set_class_of_dev_complete() return void
The return value of mgmt_set_class_of_dev_complete() function is
not used and so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:54:28 -03:00
Marcel Holtmann 3e248560d9 Bluetooth: Make mgmt_ssp_enable_complete() return void
The return value of mgmt_ssp_enable_complete() function is not
used and so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:54:23 -03:00
Marcel Holtmann 464996aea4 Bluetooth: Make mgmt_auth_enable_complete() return void
The return value of mgmt_auth_enable_complete() function is not
used and so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:54:10 -03:00
Marcel Holtmann e546099c31 Bluetooth: Make mgmt_auth_failed() return void
The return value of mgmt_auth_failed() function is not used
and so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:53:21 -03:00
Marcel Holtmann 3eb385289a Bluetooth: Make mgmt_pin_code_neg_reply_complete() return void
The return value of mgmt_pin_code_neg_reply_complete() function is
not used and so just change it to return void.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-10-15 20:53:13 -03:00