Commit Graph

43 Commits

Author SHA1 Message Date
Christoph Hellwig 4576758db5 [XFS] use generic_permission
Now that all direct caller of xfs_iaccess are gone we can kill xfs_iaccess
and xfs_access and just use generic_permission with a check_acl callback.
This is required for the per-mount read-only patchset in -mm to work
properly with XFS.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30370a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:22:38 +11:00
Christoph Hellwig 45ba598e56 [XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros.
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of
XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode
that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an
xfs_dinode that embedds a xfs_dinode_core one will have to do endian
swapping while the other doesn't. Instead of having the current mess with
the CFORK macros that have byteswapping and non-byteswapping version
(which are inconsistantly named while we're at it) just define each family
of the macros to stand by itself and simplify the whole matter.

A few direct references to the CFORK variants were cleaned up to use IFORK
or DFORK to make this possible.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30163a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:19:24 +11:00
Robert P. J. Day 40ebd81d1a [XFS] Use kernel-supplied "roundup_pow_of_two" for simplicity
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30098a

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:18:19 +11:00
David Chinner 5d51eff453 [XFS] Fix inode allocation latency
The log force added in xfs_iget_core() has been a performance issue since
it was introduced for tight loops that allocate then unlink a single file.
under heavy writeback, this can introduce unnecessary latency due tothe
log I/o getting stuck behind bulk data writes.

Fix this latency problem by avoinding the need for the log force by moving
the place we mark linux inode dirty to the transaction commit rather than
on transaction completion.

This also closes a potential hole in the sync code where a linux inode is
not dirty between the time it is modified and the time the log buffer has
been written to disk.

SGI-PV: 972753
SGI-Modid: xfs-linux-melb:xfs-kern:30007a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:16:07 +11:00
Christoph Hellwig 10090be25c [XFS] cleanup vnode useage in xfs_iget.c
Get rid of vnode useage in xfs_iget.c and pass Linux inode / xfs_inode
where apropinquate. And kill some useless helpers while we're at it.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29808a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:55:46 +11:00
Christoph Hellwig 613d70436c [XFS] kill xfs_iocore_t
xfs_iocore_t is a structure embedded in xfs_inode. Except for one field it
just duplicates fields already in xfs_inode, and there is nothing this
abstraction buys us on XFS/Linux. This patch removes it and shrinks source
and binary size of xfs aswell as shrinking the size of xfs_inode by 60/44
bytes in debug/non-debug builds.

SGI-PV: 970852
SGI-Modid: xfs-linux-melb:xfs-kern:29754a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:48:58 +11:00
Eric Sandeen 36e41eebda [XFS] Cleanup lock goop.
Switch last couple lock_t's to spinlock_t's. Remove now-unused
spinlock-related macros & types.

SGI-PV: 970382
SGI-Modid: xfs-linux-melb:xfs-kern:29748a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:47:35 +11:00
Lachlan McIlroy cf441eeb79 [XFS] clean up vnode/inode tracing
Simplify vnode tracing calls by embedding function name & return addr in
the calling macro.

Also do a lot of vnode->inode renaming for consistency, while we're at it.

SGI-PV: 970335
SGI-Modid: xfs-linux-melb:xfs-kern:29650a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2008-02-07 16:42:19 +11:00
Christoph Hellwig bd186aa901 [XFS] kill the vfs_flags member in struct bhv_vfs
All flags are added to xfs_mount's m_flag instead. Note that the 32bit
inode flag was duplicated in both of them, but only cleared in the mount
when it was not nessecary due to the filesystem beeing small enough. Two
flags are still required here - one to indicate the mount option setting,
and one to indicate if it applies or not.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29507a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:45:57 +10:00
Christoph Hellwig 0a74cd1964 [XFS] kill struct bhv_vnode
Now that struct bhv_vnode is empty we can just kill it. Retain bhv_vnode_t
as a typedef for struct inode for the time being until all the fallout is
cleaned up.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29500a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:40:24 +10:00
Christoph Hellwig 1543d79c45 [XFS] move v_trace from bhv_vnode to xfs_inode
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS
inode. Note that this makes the tracing macros rather misnamed, but this
kind of fallout will be fixed up incrementally later on.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29498a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:39:25 +10:00
Christoph Hellwig b677c210ce [XFS] move v_iocount from bhv_vnode to xfs_inode
struct bhv_vnode is on it's way out, so move the I/O count to the XFS
inode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29497a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:38:56 +10:00
Christoph Hellwig 09262b4339 [XFS] Create xfs_iflags_test_and_clear helper function
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29496a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:38:36 +10:00
Christoph Hellwig b3aea4edc2 [XFS] kill the v_flag member in struct bhv_vnode
All flags previously handled at the vnode level are not in the xfs_inode
where we already have a flags mechanisms and free bits for flags
previously in the vnode.

SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29495a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 11:37:29 +10:00
Christoph Hellwig 739bfb2a7d [XFS] call common xfs vnode-level helpers directly and remove vnode operations
SGI-PV: 969608
SGI-Modid: xfs-linux-melb:xfs-kern:29493a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-16 10:40:00 +10:00
David Chinner da353b0d64 [XFS] Radix tree based inode caching
One of the perpetual scaling problems XFS has is indexing it's incore
inodes. We currently uses hashes and the default hash sizes chosen can
only ever be a tradeoff between memory consumption and the maximum
realistic size of the cache.

As a result, anyone who has millions of inodes cached on a filesystem
needs to tunes the size of the cache via the ihashsize mount option to
allow decent scalability with inode cache operations.

A further problem is the separate inode cluster hash, whose size is based
on the ihashsize but is smaller, and so under certain conditions (sparse
cluster cache population) this can become a limitation long before the
inode hash is causing issues.

The following patchset removes the inode hash and cluster hash and
replaces them with radix trees to avoid the scalability limitations of the
hashes. It also reduces the size of the inodes by 3 pointers....

SGI-PV: 969561
SGI-Modid: xfs-linux-melb:xfs-kern:29481a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:50:50 +10:00
Christoph Hellwig 347d1c0195 [XFS] dinode endianess annotations
Biggest bit is duplicating the dinode structure so we have one annotated for
native endianess and one for disk endianess. The other significant change
is that xfs_xlate_dinode_core is split into one helper per direction to
allow for proper annotations, everything else is trivial.

As a sidenode splitting out the incore dinode means we can move it into
xfs_inode.h in a later patch and severely improving on the include hell in
xfs.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29476a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:48:30 +10:00
Christoph Hellwig a6f64d4aea [XFS] split ondisk vs incore versions of xfs_bmbt_rec_t
currently xfs_bmbt_rec_t is used both for ondisk extents as well as
host-endian ones. This patch adds a new xfs_bmbt_rec_host_t for the native
endian ones and cleans up the fallout. There have been various endianess
issues in the tracing / debug printf code that are fixed by this patch.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29318a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:25:51 +10:00
David Chinner 0f1145cc18 [XFS] Fix lockdep annotations for xfs_lock_inodes
SGI-PV: 967035
SGI-Modid: xfs-linux-melb:xfs-kern:29026a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14 18:09:42 +10:00
David Chinner 2a82b8be8a [XFS] Concurrent Multi-File Data Streams
In media spaces, video is often stored in a frame-per-file format. When
dealing with uncompressed realtime HD video streams in this format, it is
crucial that files do not get fragmented and that multiple files a placed
contiguously on disk.

When multiple streams are being ingested and played out at the same time,
it is critical that the filesystem does not cross the streams and
interleave them together as this creates seek and readahead cache miss
latency and prevents both ingest and playout from meeting frame rate
targets.

This patch set creates a "stream of files" concept into the allocator to
place all the data from a single stream contiguously on disk so that RAID
array readahead can be used effectively. Each additional stream gets
placed in different allocation groups within the filesystem, thereby
ensuring that we don't cross any streams. When an AG fills up, we select a
new AG for the stream that is not in use.

The core of the functionality is the stream tracking - each inode that we
create in a directory needs to be associated with the directories' stream.
Hence every time we create a file, we look up the directories' stream
object and associate the new file with that object.

Once we have a stream object for a file, we use the AG that the stream
object point to for allocations. If we can't allocate in that AG (e.g. it
is full) we move the entire stream to another AG. Other inodes in the same
stream are moved to the new AG on their next allocation (i.e. lazy
update).

Stream objects are kept in a cache and hold a reference on the inode.
Hence the inode cannot be reclaimed while there is an outstanding stream
reference. This means that on unlink we need to remove the stream
association and we also need to flush all the associations on certain
events that want to reclaim all unreferenced inodes (e.g. filesystem
freeze).

SGI-PV: 964469
SGI-Modid: xfs-linux-melb:xfs-kern:29096a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2007-07-14 15:40:53 +10:00
Lachlan McIlroy f7c66ce3f7 [XFS] Add lockdep support for XFS
SGI-PV: 963965
SGI-Modid: xfs-linux-melb:xfs-kern:28485a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 13:50:19 +10:00
Lachlan McIlroy ba87ea699e [XFS] Fix to prevent the notorious 'NULL files' problem after a crash.
The problem that has been addressed is that of synchronising updates of
the file size with writes that extend a file. Without the fix the update
of a file's size, as a result of a write beyond eof, is independent of
when the cached data is flushed to disk. Often the file size update would
be written to the filesystem log before the data is flushed to disk. When
a system crashes between these two events and the filesystem log is
replayed on mount the file's size will be set but since the contents never
made it to disk the file is full of holes. If some of the cached data was
flushed to disk then it may just be a section of the file at the end that
has holes.

There are existing fixes to help alleviate this problem, particularly in
the case where a file has been truncated, that force cached data to be
flushed to disk when the file is closed. If the system crashes while the
file(s) are still open then this flushing will never occur.

The fix that we have implemented is to introduce a second file size,
called the in-memory file size, that represents the current file size as
viewed by the user. The existing file size, called the on-disk file size,
is the one that get's written to the filesystem log and we only update it
when it is safe to do so. When we write to a file beyond eof we only
update the in- memory file size in the write operation. Later when the I/O
operation, that flushes the cached data to disk completes, an I/O
completion routine will update the on-disk file size. The on-disk file
size will be updated to the maximum offset of the I/O or to the value of
the in-memory file size if the I/O includes eof.

SGI-PV: 958522
SGI-Modid: xfs-linux-melb:xfs-kern:28322a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 13:49:46 +10:00
Lachlan McIlroy d3cf209476 [XFS] propogate return codes from flush routines
This patch handles error return values in fs_flush_pages and
fs_flushinval_pages. It changes the prototype of fs_flushinval_pages so we
can propogate the errors and handle them at higher layers. I also modified
xfs_itruncate_start so that it could propogate the error further.

SGI-PV: 961990
SGI-Modid: xfs-linux-melb:xfs-kern:28231a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Stewart Smith <stewart@flamingspork.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 13:49:27 +10:00
David Chinner 7a18c38607 [XFS] Clean up i_flags and i_flags_lock handling.
SGI-PV: 956832
SGI-Modid: xfs-linux-melb:xfs-kern:27358a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nscott@aconex.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-11-11 18:04:54 +11:00
David Chinner f273ab848b [XFS] Really fix use after free in xfs_iunpin.
The previous attempts to fix the linux inode use-after-free in xfs_iunpin
simply made the problem harder to hit. We actually need complete exclusion
between xfs_reclaim and xfs_iunpin, as well as ensuring that the i_flags
are consistent during both of these functions. Introduce a new spinlock
for exclusion and the i_flags, and fix up xfs_iunpin to use igrab before
marking the inode dirty.

SGI-PV: 952967
SGI-Modid: xfs-linux-melb:xfs-kern:26964a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 11:06:03 +10:00
Nathan Scott 745b1f47fc [XFS] Remove last bulkstat false-positives with debug kernels.
SGI-PV: 953819
SGI-Modid: xfs-linux-melb:xfs-kern:26628a

Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 11:02:23 +10:00
Nathan Scott 67fcaa73ad [XFS] Resolve a namespace collision on vnode/vnodeops for FreeBSD porters.
SGI-PV: 953338
SGI-Modid: xfs-linux-melb:xfs-kern:26107a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 17:00:52 +10:00
Nathan Scott b83bd13881 [XFS] Resolve a namespace collision on vfs/vfsops for FreeBSD porters.
SGI-PV: 9533338
SGI-Modid: xfs-linux-melb:xfs-kern:26106a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 16:48:30 +10:00
David Chinner 1fc5d959d8 [XFS] Fix inode reclaim scalability regression. When a filesystem has
millions of inodes cached and has sparse cluster population, removing
inodes from the cluster hash consumes excessive amounts of CPU time.
Reduce the CPU cost by making removal O(1) via use of a double linked list
for the hash chains.

SGI-PV: 951551
SGI-Modid: xfs-linux-melb:xfs-kern:25683a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-04-11 15:11:12 +10:00
Nathan Scott b12dd34298 [XFS] Fix an infinite loop issue in bulkstat when a corrupt inode is
detected.  Thanks to Roger Willcocks.

SGI-PV: 951054
SGI-Modid: xfs-linux-melb:xfs-kern:25477a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:26:04 +11:00
Mandy Kirkconnell 8867bc9bf0 [XFS] There are a few problems with the new
xfs_bmap_search_multi_extents() wrapper function that I introduced in mod
xfs-linux:xfs-kern:207393a. The function was added as a wrapper around
xfs_bmap_do_search_extents() to avoid breaking the top-of-tree CXFS
interface.  The idea of the function was basically to extract the target
extent buffer (if muli- level extent allocation mode), then call
xfs_bmap_do_search_extents() with either a pointer to the first extent in
the target buffer or a pointer to the first extent in the file, depending
on which extent mode was being used.  However, in addition to locating the
target extent record for block bno, xfs_bmap_do_search_extents() also sets
four parameters needed by the caller: *lastx, *eofp, *gotp, *prevp. 
Passing only the target extent buffer to xfs_bmap_do_search_extents()
causes *eofp to be set incorrectly if the extent is at the end of the
target list but there are actually more extents in the next er_extbuf.
Likewise, if the extent is the first one in the buffer but NOT the first
in the file, *prevp is incorrectly set to NULL.  Adding the needed
functionality to xfs_bmap_search_multi_extents() to re-set any incorrectly
set fields is redundant and makes the call to xfs_bmap_do_search_extents()
not make much sense when multi-level extent allocation mode is being used.
 This mod basically extracts the two functional components from
xfs_bmap_do_search_extents(), with the intent of obsoleting/removing
xfs_bmap_do_search_extents() after the CXFS mult-level in-core extent
changes are checked in.  The two components are:  1) The binary search to
locate the target extent record, and 2) Setting the four parameters needed
by the caller (*lastx, *eofp, *gotp, *prevp).  Component 1: I created a
new function in xfs_inode.c called xfs_iext_bno_to_ext(), which executes
the binary search to find the target extent record.
xfs_bmap_search_multi_extents() has been modified to call
xfs_iext_bno_to_ext() rather than xfs_bmap_do_search_extents().  Component
2: The parameter setting functionality has been added to
xfs_bmap_search_multi_extents(), eliminating the need for
xfs_bmap_do_search_extents().  These changes make the removal of
xfs_bmap_do_search_extents() trival once the CXFS changes are in place. 
They also allow us to maintain the current XFS interface, using the new
search function introduced in mod xfs-linux:xfs-kern:207393a.

SGI-PV: 928864
SGI-Modid: xfs-linux-melb:xfs-kern:207866a

Signed-off-by: Mandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-17 17:25:04 +11:00
Mandy Kirkconnell 0293ce3a9f [XFS] 929045 567344 This mod introduces multi-level in-core file extent
functionality, building upon the new layout introduced in mod
xfs-linux:xfs-kern:207390a.  The new multi-level extent allocations are
only required for heavily fragmented files, so the old-style linear extent
list is used on files until the extents reach a pre-determined size of 4k.
4k buffers are used because this is the system page size on Linux i386 and
systems with larger page sizes don't seem to gain much, if anything, by
using their native page size as the extent buffer size. Also, using 4k
extent buffers everywhere provides a consistent interface for CXFS across
different platforms.  The 4k extent buffers are managed by an indirection
array (xfs_ext_irec_t) which is basically just a pointer array with a bit
of extra information to keep track of the number of extents in each buffer
as well as the extent offset of each buffer.  Major changes include:  -
Add multi-level in-core file extent functionality to the xfs_iext_  
subroutines introduced in mod:	xfs-linux:xfs-kern:207390a  - Introduce 13
new subroutines which add functionality for multi-level   in-core file
extents:	 xfs_iext_add_indirect_multi()	      
xfs_iext_remove_indirect()	   xfs_iext_realloc_indirect()	      
xfs_iext_indirect_to_direct()	      xfs_iext_bno_to_irec()	    
xfs_iext_idx_to_irec()	       xfs_iext_irec_init()	   
xfs_iext_irec_new()	    xfs_iext_irec_remove()	  
xfs_iext_irec_compact() 	xfs_iext_irec_compact_pages()	     
xfs_iext_irec_compact_full()	     xfs_iext_irec_update_extoffs()

SGI-PV: 928864
SGI-Modid: xfs-linux-melb:xfs-kern:207393a

Signed-off-by: Mandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-14 13:30:23 +11:00
Mandy Kirkconnell 4eea22f01b [XFS] 929045 567344 This mod re-organizes some of the in-core file extent
code to prepare for an upcoming mod which will introduce multi-level
in-core extent allocations. Although the in-core extent management is
using a new code path in this mod, the functionality remains the same. 
Major changes include:	- Introduce 10 new subroutines which re-orgainze
the existing code but	do NOT change functionality:	    
xfs_iext_get_ext()	   xfs_iext_insert()	     xfs_iext_add()	  
 xfs_iext_remove()	   xfs_iext_remove_inline()	   
xfs_iext_remove_direct()	 xfs_iext_realloc_direct()	  
xfs_iext_direct_to_inline()	    xfs_iext_inline_to_direct()        
xfs_iext_destroy() - Remove 2 subroutines (functionality moved to new
subroutines above):	    xfs_iext_realloc() -replaced by xfs_iext_add()
and xfs_iext_remove()	      xfs_bmap_insert_exlist() - replaced by
xfs_iext_insert()	  xfs_bmap_delete_exlist() - replaced by
xfs_iext_remove() - Replace all hard-coded (indexed) extent assignments
with a call to	 xfs_iext_get_ext() - Replace all extent record pointer
arithmetic (ep++, ep--, base + lastx,..)   with calls to
xfs_iext_get_ext() - Update comments to remove the idea of a single
"extent list" and   introduce "extent record" terminology instead

SGI-PV: 928864
SGI-Modid: xfs-linux-melb:xfs-kern:207390a

Signed-off-by: Mandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-14 13:29:52 +11:00
Christoph Hellwig 75e17b3caf [XFS] add helper to get xfs_inode from vnode
SGI-PV: 947206
SGI-Modid: xfs-linux-melb:xfs-kern:203960a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-11 20:58:44 +11:00
Christoph Hellwig 42fe2b1f7f [XFS] fix, speedup and simplify atime handling let the VFS handle atime
updates and only sync back to the xfs inode when nessecary

SGI-PV: 946679
SGI-Modid: xfs-linux-melb:xfs-kern:203362a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-11 15:35:17 +11:00
Nathan Scott 9dac13e7ff [XFS] Remove unused type, xfs_gap_t.
SGI-PV: 907752
SGI-Modid: xfs-linux:xfs-kern:23932a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 15:05:34 +11:00
Nathan Scott 7b71876980 [XFS] Update license/copyright notices to match the prefered SGI
boilerplate.

SGI-PV: 913862
SGI-Modid: xfs-linux:xfs-kern:23903a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:58:39 +11:00
Nathan Scott a844f4510d [XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot.
SGI-PV: 943122
SGI-Modid: xfs-linux:xfs-kern:23901a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:38:42 +11:00
Nathan Scott 30dab21abb [XFS] Add a comment about the use of XFS_SIZE_TOKEN_WANT.
SGI-PV: 936331
SGI-Modid: xfs-linux:xfs-kern:23827a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 10:31:13 +11:00
Christoph Hellwig efa8027804 [XFS] rewrite xfs_iflush_all
SGI-PV: 936890
SGI-Modid: xfs-linux:xfs-kern:193349a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21 15:37:17 +10:00
Christoph Hellwig ba0f32d460 [XFS] mark various symbols static Patch from Adrian Bunk
SGI-PV: 936255
SGI-Modid: xfs-linux:xfs-kern:192760a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21 15:36:52 +10:00
Nathan Scott 31b084aef3 [XFS] Fix up uses of nlink_t incorrectly restricting us to 2^16 links for some platforms
SGI Modid: xfs-linux:xfs-kern:22032a

Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Christoph Hellwig <hch@sgi.com>
2005-05-05 13:25:00 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00