Commit Graph

14 Commits

Author SHA1 Message Date
Linus Torvalds 8e4ff713ce RTC for 5.2
Subsystem:
  - set_mmss and set_mmss64 rtc_ops removal
  - Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900
  - Use SPDX identifier for the core
  - validate upper bound of tm->tm_year
 
 New driver:
  - Aspeed BMC SoC RTC
 
 Drivers:
  - abx80x: use rtc_add_group
  - ds3232: nvram support
  - pcf85063: add alarm, nvram, offset correction and microcrystal rv8263 support
  - x1205: add of_match_table
  - Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331, digicolor,
    ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx, mxc, pcap, stmp3xxx,
    test, wm831x, xgene.
  - Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor, dm355evm,
    ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx, mc13xxx, mv, mxc,
    omap, pcap, pcf85063, pcf85363, ps3, sh, stmp3xxx, sun4v, tegra, wm831x,
    xgene.
  - Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that properly set
    the RTC range.
  - Use dev_get_drvdata instead of multiple indirections.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlzTOucACgkQAyWl4gNJ
 NJI+0A//e4Z+pKNWnJnjMn/C15/4dxVxM2SJy02Pl31X9vLKuux/6idU1oBnbfxv
 EFZPGwDnl+3MPnl+8fzb5s/G+FN363LL1I3e3tOhdJHbrBdYjvVUJpyv2/nouDaU
 uGDIrYt+3ahMczfqWKn+5fSnwej7un5r++19hUVrD1M9fLXrT3Q7ZcY6kuhzX8Eb
 MOeJz/NwMeUv5I1yxRZUVQuiTMvgNQZUjc9Vn2Xq/SeIoqk9DSA7Sr/r3AvzmXPW
 o7a0IE4fa7VhNxMG0/SlFFdvhlDxE/f6rafPBEicAp9MSbt+5BVPbdXdCALbwcQS
 5BKR0eOTF6ivLjLacu0hCHrb+CHeY3PUR7LCNyc4Bh1064Yi9/6b/oKrNkf02EMn
 HKXSi5MPnZFZQTJAlKHTP8MytTV0Qz1TzRcItg8ZiAwg3RCDC5n4CTiFJAgzzNZ+
 TTwmDDZOhKaqsLX1NhTE/rID3GtQA76NPcsauRygUIEkaL5y7miFTqEqSE1uoou4
 1MHMnjfvFgluIBQzxSv8XOeI2tS4Oan7ju/h3qcxsGsItYosqzDg7SgMCW7nDqSs
 XD0ltk3kiUI1+VBBoIXknNdyazwzG359jlLuWGyYAqn1MJpfGeOz9dlz0wuB6Zm4
 7i5SUFjVHTxhQzSE//PiKRb6CP9PJwDHPQ/VV1FuoXO8Jt7+jAs=
 =NyAx
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "A huge series from me this cycle. I went through many drivers to set
  the date and time range supported by the RTC which helps solving HW
  limitation when the time comes (as early as next year for some). This
  time, I focused on drivers using .set_mms and .set_mmss64, allowing me
  to remove those callbacks. About a third of the patches got reviews, I
  actually own the RTCs and I tested another third and the remaining one
  are unlikely to cause any issues.

  Other than that, a single new driver and the usual fixes here and there.

  Summary:

  Subsystem:

   - set_mmss and set_mmss64 rtc_ops removal

   - Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900

   - Use SPDX identifier for the core

   - validate upper bound of tm->tm_year

  New driver:

   - Aspeed BMC SoC RTC

  Drivers:

   - abx80x: use rtc_add_group

   - ds3232: nvram support

   - pcf85063: add alarm, nvram, offset correction and microcrystal
     rv8263 support

   - x1205: add of_match_table

   - Use set_time instead of set_mms/set_mmss64 for: ab3100, coh901331,
     digicolor, ds1672, ds2404, ep93xx, imxdi, jz4740, lpc32xx, mc13xxx,
     mxc, pcap, stmp3xxx, test, wm831x, xgene.

   - Set RTC range for: ab3100, at91sam9, coh901331, da9063, digicolor,
     dm355evm, ds1672, ds2404, ep39xx, goldfish, imxdi, jz4740, lpc32xx,
     mc13xxx, mv, mxc, omap, pcap, pcf85063, pcf85363, ps3, sh,
     stmp3xxx, sun4v, tegra, wm831x, xgene.

   - Switch to rtc_time64_to_tm/rtc_tm_to_time64 for the driver that
     properly set the RTC range.

   - Use dev_get_drvdata instead of multiple indirections"

* tag 'rtc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (177 commits)
  rtc: snvs: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  rtc: imxdi: remove unused variable
  rtc: drop set_mms and set_mmss64
  rtc: pcap: convert to SPDX identifier
  rtc: pcap: use .set_time
  rtc: pcap: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: pcap: set range
  rtc: digicolor: convert to SPDX identifier
  rtc: digicolor: use .set_time
  rtc: digicolor: set range
  rtc: digicolor: fix possible race condition
  rtc: jz4740: convert to SPDX identifier
  rtc: jz4740: rework invalid time detection
  rtc: jz4740: use dev_pm_set_wake_irq() to simplify code
  rtc: jz4740: use .set_time
  rtc: jz4740: remove useless check
  rtc: jz4740: switch to rtc_time64_to_tm/rtc_tm_to_time64
  rtc: jz4740: set range
  rtc: 88pm860x: prevent use-after-free on device remove
  rtc: Use dev_get_drvdata()
  ...
2019-05-09 14:46:33 -07:00
Alexandre Belloni b599db3a9f rtc: da9063: switch to rtc_time64_to_tm/rtc_tm_to_time64
Call the 64bit versions of rtc_tm time conversion now that the range is
enforced by the core.

Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04 10:07:10 +02:00
Alexandre Belloni 5ff404d149 rtc: da9063: set range
The DA9062 and DA9063 have a year register that can go up to 0x3F.

Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04 10:07:10 +02:00
Wolfram Sang 737842e575 rtc: da9063: convert header to SPDX
Covnert the header of the source file to SPDX.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04 10:07:07 +02:00
Alexandre Belloni 882c5e552f rtc: da9063: set uie_unsupported when relevant
The DA9063AD doesn't support alarms on any seconds and its granularity is
the minute. Set uie_unsupported in that case.

Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-02 23:33:09 +02:00
Alexandre Belloni bb54be134a rtc: diasemi: stop validating rtc_time in .read_time
The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it before returning from the callback.

Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-02 10:11:02 +01:00
Enrico Scholz 2ad2c17480 rtc: da9063: avoid writing undefined data to rtc
driver did

| static void da9063_tm_to_data(struct rtc_time *tm, u8 *data,
| {
|  	const struct da9063_compatible_rtc_regmap *config = rtc->config;
|
| 	data[RTC_SEC] &= ~config->rtc_count_sec_mask;
| 	data[RTC_SEC] |= tm->tm_sec & config->rtc_count_sec_mask;
| ...
| }
| ...
| static int da9063_rtc_set_time(struct device *dev, struct rtc_time *tm)
| {
|       ...
|	u8 data[RTC_DATA_LEN];
|	int ret;
|
|	da9063_tm_to_data(tm, data, rtc);

which means that some bits of stack content (in 'data[]') was masked out
and written to the RTC.

Because da9063_tm_to_data() is used only by da9063_rtc_set_time() and
da9063_rtc_set_alarm(), we can write fields directly.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11 20:19:57 +01:00
Steve Twiss 77535acedc rtc: da9063: fix access ordering error during RTC interrupt at system power on
This fix alters the ordering of the IRQ and device registrations in the RTC
driver probe function. This change will apply to the RTC driver that supports
both DA9063 and DA9062 PMICs.

A problem could occur with the existing RTC driver if:

A system is started from a cold boot using the PMIC RTC IRQ to initiate a
power on operation. For instance, if an RTC alarm is used to start a
platform from power off.
The existing driver IRQ is requested before the device has been properly
registered.
i.e.
    ret = devm_request_threaded_irq()
comes before
    rtc->rtc_dev = devm_rtc_device_register();

In this case, the interrupt can be called before the device has been
registered and the handler can be called immediately. The IRQ handler
da9063_alarm_event() contains the function call

    rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);

which in turn tries to access the unavailable rtc->rtc_dev.

The fix is to reorder the functions inside the RTC probe. The IRQ is
requested after the RTC device resource has been registered so that
get_irq_byname is the last thing to happen.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-20 13:39:29 +01:00
Steve Twiss ce006ca6d3 rtc: da9063: GPL copyright inconsistency fix
Fix misleading and inconsistent copyright header wording.

Alter the copyright header text and MODULE_LICENSE macro to ensure the
GPL v2 licence description is correctly represented.

It will remove the incorrectly LGPL worded text. Words such as "Library"
from the line "GNU Library General Public License"; and replace the word
"library" with "program" in several other places.

The copyright should match the GPL v2 description as specified in the GNU
license found here: http://www.gnu.org/licenses/gpl-2.0.html

It should also match this copyright text with the correct MODULE_LICENSE
macro text as found in the kernel: include/linux/module.h
In this case "GNU Public License v2 or later" is linked with "GPL".

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08 14:12:26 +01:00
Javier Martinez Canillas 73798d5c41 rtc: Fix module autoload for OF platform drivers
These platform drivers have a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:22 +02:00
S Twiss 80ca3277bc rtc: da9063: Add DA9062 RTC capability to DA9063 RTC driver
Add DA9062 RTC support into the existing DA9063 RTC driver component by
using generic access tables for common register and bit mask definitions.

The following change will add generic register and bit mask support to the
DA9063 RTC. The changes are slightly complicated by requiring support for
three register sets: DA9063-AD, DA9063-BB and DA9062-AA.

The following alterations have been made to the DA9063 RTC:

- Addition of a da9063_compatible_rtc_regmap structure to hold all generic
  registers and bitmasks for this type of RTC component.
- A re-write of struct da9063 to use pointers for regmap and compatible
  registers/masks definitions
- Addition of a of_device_id table for DA9063 and DA9062 defaults
- Refactoring functions to use struct da9063_compatible_rtc accesses to
  generic registers/masks instead of using defines from registers.h
- Re-work of da9063_rtc_probe() to use of_match_node() and dev_get_regmap()
  to provide initialisation of generic registers and masks and access to
  regmap

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:08 +02:00
Wolfram Sang 0929ae376e rtc: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:31 +02:00
Opensource [Steve Twiss] 9cb42e2a8e mfd: da9063: Add support for AD silicon variant
Add register definitions for DA9063 AD (0x3) silicon variant ID
the ability to choose the silicon variant at run-time using regmap
configuration. This patch also adds RTC support for the AD silicon
changes.

It adds both BB and AD support as regmap ranges and then makes the
distinction between the two tables at run-time. This allows both AD
and BB silicon variants to be supported at the same time.

Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28 08:09:25 +01:00
Opensource [Steve Twiss] c2a57550fe rtc: da9063: RTC driver
Add the RTC driver for DA9063.

[akpm@linux-foundation.org: coding-style tweaks]
Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: David Dajun Chen <david.chen@diasemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:08 -07:00