Commit Graph

202 Commits

Author SHA1 Message Date
Paul E. McKenney eb75767be0 nohz_full: Force RCU's grace-period kthreads onto timekeeping CPU
Because RCU's quiescent-state-forcing mechanism is used to drive the
full-system-idle state machine, and because this mechanism is executed
by RCU's grace-period kthreads, this commit forces these kthreads to
run on the timekeeping CPU (tick_do_timer_cpu).  To do otherwise would
mean that the RCU grace-period kthreads would force the system into
non-idle state every time they drove the state machine, which would
be just a bit on the futile side.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-08-31 14:44:02 -07:00
Paul E. McKenney 0edd1b1784 nohz_full: Add full-system-idle state machine
This commit adds the state machine that takes the per-CPU idle data
as input and produces a full-system-idle indication as output.  This
state machine is driven out of RCU's quiescent-state-forcing
mechanism, which invokes rcu_sysidle_check_cpu() to collect per-CPU
idle state and then rcu_sysidle_report() to drive the state machine.

The full-system-idle state is sampled using rcu_sys_is_idle(), which
also drives the state machine if RCU is idle (and does so by forcing
RCU to become non-idle).  This function returns true if all but the
timekeeping CPU (tick_do_timer_cpu) are idle and have been idle long
enough to avoid memory contention on the full_sysidle_state state
variable.  The rcu_sysidle_force_exit() may be called externally
to reset the state machine back into non-idle state.

For large systems the state machine is driven out of RCU's
force-quiescent-state logic, which provides good scalability at the price
of millisecond-scale latencies on the transition to full-system-idle
state.  This is not so good for battery-powered systems, which are usually
small enough that they don't need to care about scalability, but which
do care deeply about energy efficiency.  Small systems therefore drive
the state machine directly out of the idle-entry code.  The number of
CPUs in a "small" system is defined by a new NO_HZ_FULL_SYSIDLE_SMALL
Kconfig parameter, which defaults to 8.  Note that this is a build-time
definition.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
[ paulmck: Use true and false for boolean constants per Lai Jiangshan. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
[ paulmck: Simplify logic and provide better comments for memory barriers,
  based on review comments and questions by Lai Jiangshan. ]
2013-08-31 14:43:50 -07:00
Paul E. McKenney d4bd54fbac nohz_full: Add full-system idle states and variables
This commit adds control variables and states for full-system idle.
The system will progress through the states in numerical order when
the system is fully idle (other than the timekeeping CPU), and reset
down to the initial state if any non-timekeeping CPU goes non-idle.
The current state is kept in full_sysidle_state.

One flavor of RCU will be in charge of driving the state machine,
defined by rcu_sysidle_state.  This should be the busiest flavor of RCU.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-08-18 18:58:51 -07:00
Paul E. McKenney eb348b8982 nohz_full: Add per-CPU idle-state tracking
This commit adds the code that updates the rcu_dyntick structure's
new fields to track the per-CPU idle state based on interrupts and
transitions into and out of the idle loop (NMIs are ignored because NMI
handlers cannot cleanly read out the time anyway).  This code is similar
to the code that maintains RCU's idea of per-CPU idleness, but differs
in that RCU treats CPUs running in user mode as idle, where this new
code does not.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-08-18 18:58:43 -07:00
Paul E. McKenney 2333210b26 nohz_full: Add rcu_dyntick data for scalable detection of all-idle state
This commit adds fields to the rcu_dyntick structure that are used to
detect idle CPUs.  These new fields differ from the existing ones in
that the existing ones consider a CPU executing in user mode to be idle,
where the new ones consider CPUs executing in user mode to be busy.
The handling of these new fields is otherwise quite similar to that for
the exiting fields.  This commit also adds the initialization required
for these fields.

So, why is usermode execution treated differently, with RCU considering
it a quiescent state equivalent to idle, while in contrast the new
full-system idle state detection considers usermode execution to be
non-idle?

It turns out that although one of RCU's quiescent states is usermode
execution, it is not a full-system idle state.  This is because the
purpose of the full-system idle state is not RCU, but rather determining
when accurate timekeeping can safely be disabled.  Whenever accurate
timekeeping is required in a CONFIG_NO_HZ_FULL kernel, at least one
CPU must keep the scheduling-clock tick going.  If even one CPU is
executing in user mode, accurate timekeeping is requires, particularly for
architectures where gettimeofday() and friends do not enter the kernel.
Only when all CPUs are really and truly idle can accurate timekeeping be
disabled, allowing all CPUs to turn off the scheduling clock interrupt,
thus greatly improving energy efficiency.

This naturally raises the question "Why is this code in RCU rather than in
timekeeping?", and the answer is that RCU has the data and infrastructure
to efficiently make this determination.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-08-18 18:58:31 -07:00
Steven Rostedt (Red Hat) f7f7bac9cb rcu: Have the RCU tracepoints use the tracepoint_string infrastructure
Currently, RCU tracepoints save only a pointer to strings in the
ring buffer. When displayed via the /sys/kernel/debug/tracing/trace file
they are referenced like the printf "%s" that looks at the address
in the ring buffer and prints out the string it points too. This requires
that the strings are constant and persistent in the kernel.

The problem with this is for tools like trace-cmd and perf that read the
binary data from the buffers but have no access to the kernel memory to
find out what string is represented by the address in the buffer.

By using the tracepoint_string infrastructure, the RCU tracepoint strings
can be exported such that userspace tools can map the addresses to
the strings.

 # cat /sys/kernel/debug/tracing/printk_formats
0xffffffff81a4a0e8 : "rcu_preempt"
0xffffffff81a4a0f4 : "rcu_bh"
0xffffffff81a4a100 : "rcu_sched"
0xffffffff818437a0 : "cpuqs"
0xffffffff818437a6 : "rcu_sched"
0xffffffff818437a0 : "cpuqs"
0xffffffff818437b0 : "rcu_bh"
0xffffffff818437b7 : "Start context switch"
0xffffffff818437cc : "End context switch"
0xffffffff818437a0 : "cpuqs"
[...]

Now userspaces tools can display:

 rcu_utilization:      Start context switch
 rcu_dyntick:          Start 1 0
 rcu_utilization:      End context switch
 rcu_batch_start:      rcu_preempt CBs=0/5 bl=10
 rcu_dyntick:          End 0 140000000000000
 rcu_invoke_callback:  rcu_preempt rhp=0xffff880071c0d600 func=proc_i_callback
 rcu_invoke_callback:  rcu_preempt rhp=0xffff880077b5b230 func=__d_free
 rcu_dyntick:          Start 140000000000000 0
 rcu_invoke_callback:  rcu_preempt rhp=0xffff880077563980 func=file_free_rcu
 rcu_batch_end:        rcu_preempt CBs-invoked=3 idle=>c<>c<>c<>c<
 rcu_utilization:      End RCU core
 rcu_grace_period:     rcu_preempt 9741 start
 rcu_dyntick:          Start 1 0
 rcu_dyntick:          End 0 140000000000000
 rcu_dyntick:          Start 140000000000000 0

Instead of:

 rcu_utilization:      ffffffff81843110
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32
 rcu_batch_start:      ffffffff81842f1d CBs=0/4 bl=10
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c
 rcu_grace_period:     ffffffff81842f1d 9939 ffffffff81842f80
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff88007888aac0 func=file_free_rcu
 rcu_grace_period:     ffffffff81842f1d 9939 ffffffff81842f95
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff88006aeb4600 func=proc_i_callback
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f32
 rcu_future_grace_period: ffffffff81842f1d 9939 9939 9940 0 0 3 ffffffff81842f3c
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff880071cb9fc0 func=__d_free
 rcu_grace_period:     ffffffff81842f1d 9939 ffffffff81842f80
 rcu_invoke_callback:  ffffffff81842f1d rhp=0xffff88007888ae80 func=file_free_rcu
 rcu_batch_end:        ffffffff81842f1d CBs-invoked=4 idle=>c<>c<>c<>c<
 rcu_utilization:      ffffffff8184311f

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-29 17:08:04 -04:00
Steven Rostedt (Red Hat) a41bfeb2f8 rcu: Simplify RCU_STATE_INITIALIZER() macro
The RCU_STATE_INITIALIZER() macro is used only in the rcutree.c file
as well as the rcutree_plugin.h file. It is passed as a rvalue to
a variable of a similar name. A per_cpu variable is also created
with a similar name as well.

The uses of RCU_STATE_INITIALIZER() can be simplified to remove some
of the duplicate code that is done. Currently the three users of this
macro has this format:

struct rcu_state rcu_sched_state =
	RCU_STATE_INITIALIZER(rcu_sched, call_rcu_sched);
DEFINE_PER_CPU(struct rcu_data, rcu_sched_data);

Notice that "rcu_sched" is called three times. This is the same with
the other two users. This can be condensed to just:

RCU_STATE_INITIALIZER(rcu_sched, call_rcu_sched);

by moving the rest into the macro itself.

This also opens the door to allow the RCU tracepoint strings and
their addresses to be exported so that userspace tracing tools can
translate the contents of the pointers of the RCU tracepoints.
The change will allow for helper code to be placed in the
RCU_STATE_INITIALIZER() macro to export the name that is used.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-29 17:08:03 -04:00
Paul Gortmaker 49fb4c6290 rcu: delete __cpuinit usage from all rcu files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the drivers/rcu uses of the __cpuinit macros
from all C files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@freedesktop.org>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:58 -04:00
Paul E. McKenney be77f87c00 Merge branches 'cbnum.2013.06.10a', 'doc.2013.06.10a', 'fixes.2013.06.10a', 'srcu.2013.06.10a' and 'tiny.2013.06.10a' into HEAD
cbnum.2013.06.10a: Apply simplifications stemming from the new callback
	numbering.

doc.2013.06.10a: Documentation updates.

fixes.2013.06.10a: Miscellaneous fixes.

srcu.2013.06.10a: Updates to SRCU.

tiny.2013.06.10a: Eliminate TINY_PREEMPT_RCU.
2013-06-10 13:46:44 -07:00
Paul E. McKenney 2439b696cb rcu: Shrink TINY_RCU by moving exit_rcu()
Now that TINY_PREEMPT_RCU is no more, exit_rcu() is always an empty
function.  But if TINY_RCU is going to have an empty function, it should
be in include/linux/rcutiny.h, where it does not bloat the kernel.
This commit therefore moves exit_rcu() out of kernel/rcupdate.c to
kernel/rcutree_plugin.h, and places a static inline empty function in
include/linux/rcutiny.h in order to shrink TINY_RCU a bit.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:45:52 -07:00
Paul E. McKenney 9a5739d73f rcu: Remove "Experimental" flags
After a release or two, features are no longer experimental.  Therefore,
this commit removes the "Experimental" tag from them.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:44:56 -07:00
Paul E. McKenney 470716fc04 rcu: Switch callers from rcu_process_gp_end() to note_gp_changes()
Because note_gp_changes() now incorporates rcu_process_gp_end() function,
this commit switches to the former and eliminates the latter.  In
addition, this commit changes external calls from __rcu_process_gp_end()
to __note_gp_changes().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:39:43 -07:00
Paul E. McKenney efc151c33b rcu: Convert rcutree_plugin.h printk calls
This commit converts printk() calls to the corresponding pr_*() calls.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-06-10 13:39:42 -07:00
Sasha Levin 615ee5443f rcu: Don't allocate bootmem from rcu_init()
When rcu_init() is called we already have slab working, allocating
bootmem at that point results in warnings and an allocation from
slab.  This commit therefore changes alloc_bootmem_cpumask_var() to
alloc_cpumask_var() in rcu_bootup_announce_oddness(), which is called
from rcu_init().

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Robin Holt <holt@sgi.com>

[paulmck: convert to zalloc_cpumask_var(), as suggested by Yinghai Lu.]
2013-05-15 10:41:12 -07:00
Paul E. McKenney 6faf72834d rcu: Fix comparison sense in rcu_needs_cpu()
Commit c0f4dfd4f (rcu: Make RCU_FAST_NO_HZ take advantage of numbered
callbacks) introduced a bug that can result in excessively long grace
periods.  This bug reverse the senes of the "if" statement checking
for lazy callbacks, so that RCU takes a lazy approach when there are
in fact non-lazy callbacks.  This can result in excessive boot, suspend,
and resume times.

This commit therefore fixes the sense of this "if" statement.

Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Joerg Roedel <joro@8bytes.org>
2013-05-14 10:53:41 -07:00
Linus Torvalds 534c97b095 Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'full dynticks' support from Ingo Molnar:
 "This tree from Frederic Weisbecker adds a new, (exciting! :-) core
  kernel feature to the timer and scheduler subsystems: 'full dynticks',
  or CONFIG_NO_HZ_FULL=y.

  This feature extends the nohz variable-size timer tick feature from
  idle to busy CPUs (running at most one task) as well, potentially
  reducing the number of timer interrupts significantly.

  This feature got motivated by real-time folks and the -rt tree, but
  the general utility and motivation of full-dynticks runs wider than
  that:

   - HPC workloads get faster: CPUs running a single task should be able
     to utilize a maximum amount of CPU power.  A periodic timer tick at
     HZ=1000 can cause a constant overhead of up to 1.0%.  This feature
     removes that overhead - and speeds up the system by 0.5%-1.0% on
     typical distro configs even on modern systems.

   - Real-time workload latency reduction: CPUs running critical tasks
     should experience as little jitter as possible.  The last remaining
     source of kernel-related jitter was the periodic timer tick.

   - A single task executing on a CPU is a pretty common situation,
     especially with an increasing number of cores/CPUs, so this feature
     helps desktop and mobile workloads as well.

  The cost of the feature is mainly related to increased timer
  reprogramming overhead when a CPU switches its tick period, and thus
  slightly longer to-idle and from-idle latency.

  Configuration-wise a third mode of operation is added to the existing
  two NOHZ kconfig modes:

   - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
     as a config option.  This is the traditional Linux periodic tick
     design: there's a HZ tick going on all the time, regardless of
     whether a CPU is idle or not.

   - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
     periodic tick when a CPU enters idle mode.

   - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
     tick when a CPU is idle, also slows the tick down to 1 Hz (one
     timer interrupt per second) when only a single task is running on a
     CPU.

  The .config behavior is compatible: existing !CONFIG_NO_HZ and
  CONFIG_NO_HZ=y settings get translated to the new values, without the
  user having to configure anything.  CONFIG_NO_HZ_FULL is turned off by
  default.

  This feature is based on a lot of infrastructure work that has been
  steadily going upstream in the last 2-3 cycles: related RCU support
  and non-periodic cputime support in particular is upstream already.

  This tree adds the final pieces and activates the feature.  The pull
  request is marked RFC because:

   - it's marked 64-bit only at the moment - the 32-bit support patch is
     small but did not get ready in time.

   - it has a number of fresh commits that came in after the merge
     window.  The overwhelming majority of commits are from before the
     merge window, but still some aspects of the tree are fresh and so I
     marked it RFC.

   - it's a pretty wide-reaching feature with lots of effects - and
     while the components have been in testing for some time, the full
     combination is still not very widely used.  That it's default-off
     should reduce its regression abilities and obviously there are no
     known regressions with CONFIG_NO_HZ_FULL=y enabled either.

   - the feature is not completely idempotent: there is no 100%
     equivalent replacement for a periodic scheduler/timer tick.  In
     particular there's ongoing work to map out and reduce its effects
     on scheduler load-balancing and statistics.  This should not impact
     correctness though, there are no known regressions related to this
     feature at this point.

   - it's a pretty ambitious feature that with time will likely be
     enabled by most Linux distros, and we'd like you to make input on
     its design/implementation, if you dislike some aspect we missed.
     Without flaming us to crisp! :-)

  Future plans:

   - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
     the periodic tick altogether when there's a single busy task on a
     CPU.  We'd first like 1 Hz to be exposed more widely before we go
     for the 0 Hz target though.

   - once we reach 0 Hz we can remove the periodic tick assumption from
     nr_running>=2 as well, by essentially interrupting busy tasks only
     as frequently as the sched_latency constraints require us to do -
     once every 4-40 msecs, depending on nr_running.

  I am personally leaning towards biting the bullet and doing this in
  v3.10, like the -rt tree this effort has been going on for too long -
  but the final word is up to you as usual.

  More technical details can be found in Documentation/timers/NO_HZ.txt"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  sched: Keep at least 1 tick per second for active dynticks tasks
  rcu: Fix full dynticks' dependency on wide RCU nocb mode
  nohz: Protect smp_processor_id() in tick_nohz_task_switch()
  nohz_full: Add documentation.
  cputime_nsecs: use math64.h for nsec resolution conversion helpers
  nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
  nohz: Reduce overhead under high-freq idling patterns
  nohz: Remove full dynticks' superfluous dependency on RCU tree
  nohz: Fix unavailable tick_stop tracepoint in dynticks idle
  nohz: Add basic tracing
  nohz: Select wide RCU nocb for full dynticks
  nohz: Disable the tick when irq resume in full dynticks CPU
  nohz: Re-evaluate the tick for the new task after a context switch
  nohz: Prepare to stop the tick on irq exit
  nohz: Implement full dynticks kick
  nohz: Re-evaluate the tick from the scheduler IPI
  sched: New helper to prevent from stopping the tick in full dynticks
  sched: Kick full dynticks CPU that have more than one task enqueued.
  perf: New helper to prevent full dynticks CPUs from stopping tick
  perf: Kick full dynticks CPU if events rotation is needed
  ...
2013-05-05 13:23:27 -07:00
Frederic Weisbecker c032862fba Merge commit '8700c95adb03' into timers/nohz
The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.

Merge a common upstream merge point that has these
updates.

Conflicts:
	include/linux/perf_event.h
	kernel/rcutree.h
	kernel/rcutree_plugin.h

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-05-02 17:54:19 +02:00
Frederic Weisbecker d1e43fa5f8 nohz: Ensure full dynticks CPUs are RCU nocbs
We need full dynticks CPU to also be RCU nocb so
that we don't have to keep the tick to handle RCU
callbacks.

Make sure the range passed to nohz_full= boot
parameter is a subset of rcu_nocbs=

The CPUs that fail to meet this requirement will be
excluded from the nohz_full range. This is checked
early in boot time, before any CPU has the opportunity
to stop its tick.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-19 13:54:04 +02:00
Paul E. McKenney 65d798f0f9 rcu: Kick adaptive-ticks CPUs that are holding up RCU grace periods
Adaptive-ticks CPUs inform RCU when they enter kernel mode, but they do
not necessarily turn the scheduler-clock tick back on.  This state of
affairs could result in RCU waiting on an adaptive-ticks CPU running
for an extended period in kernel mode.  Such a CPU will never run the
RCU state machine, and could therefore indefinitely extend the RCU state
machine, sooner or later resulting in an OOM condition.

This patch, inspired by an earlier patch by Frederic Weisbecker, therefore
causes RCU's force-quiescent-state processing to check for this condition
and to send an IPI to CPUs that remain in that state for too long.
"Too long" currently means about three jiffies by default, which is
quite some time for a CPU to remain in the kernel without blocking.
The rcu_tree.jiffies_till_first_fqs and rcutree.jiffies_till_next_fqs
sysfs variables may be used to tune "too long" if needed.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-15 20:18:36 +02:00
Paul E. McKenney 6d87669357 Merge branches 'doc.2013.03.12a', 'fixes.2013.03.13a' and 'idlenocb.2013.03.26b' into HEAD
doc.2013.03.12a: Documentation changes.

fixes.2013.03.13a: Miscellaneous fixes.

idlenocb.2013.03.26b: Remove restrictions on no-CBs CPUs, make
	RCU_FAST_NO_HZ take advantage of numbered callbacks, add
	callback acceleration based on numbered callbacks.
2013-03-26 08:07:38 -07:00
Paul E. McKenney 0446be4897 rcu: Abstract rcu_start_future_gp() from rcu_nocb_wait_gp()
CPUs going idle will need to record the need for a future grace
period, but won't actually need to block waiting on it.  This commit
therefore splits rcu_start_future_gp(), which does the recording, from
rcu_nocb_wait_gp(), which now invokes rcu_start_future_gp() to do the
recording, after which rcu_nocb_wait_gp() does the waiting.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:57 -07:00
Paul E. McKenney 8b425aa8f1 rcu: Rename n_nocb_gp_requests to need_future_gp
CPUs going idle need to be able to indicate their need for future grace
periods.  A mechanism for doing this already exists for no-callbacks
CPUs, so the idea is to re-use that mechanism.  This commit therefore
moves the ->n_nocb_gp_requests field of the rcu_node structure out from
under the CONFIG_RCU_NOCB_CPU #ifdef and renames it to ->need_future_gp.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:56 -07:00
Paul E. McKenney b8462084a2 rcu: Push lock release to rcu_start_gp()'s callers
If CPUs are to give prior notice of needed grace periods, it will be
necessary to invoke rcu_start_gp() without dropping the root rcu_node
structure's ->lock.  This commit takes a second step in this direction
by moving the release of this lock to rcu_start_gp()'s callers.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:55 -07:00
Paul E. McKenney bd9f0686fc rcu: Repurpose no-CBs event tracing to future-GP events
Dyntick-idle CPUs need to be able to pre-announce their need for grace
periods.  This can be done using something similar to the mechanism used
by no-CB CPUs to announce their need for grace periods.  This commit
moves in this direction by renaming the no-CBs grace-period event tracing
to suit the new future-grace-period needs.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:54 -07:00
Paul E. McKenney c0f4dfd4f9 rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks
Because RCU callbacks are now associated with the number of the grace
period that they must wait for, CPUs can now take advance callbacks
corresponding to grace periods that ended while a given CPU was in
dyntick-idle mode.  This eliminates the need to try forcing the RCU
state machine while entering idle, thus reducing the CPU intensiveness
of RCU_FAST_NO_HZ, which should increase its energy efficiency.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:51 -07:00
Paul E. McKenney 5e44ce35a6 rcu: Export RCU_FAST_NO_HZ parameters to sysfs
RCU_FAST_NO_HZ operation is controlled by four compile-time C-preprocessor
macros, but some use cases benefit greatly from runtime adjustment,
particularly when tuning devices.  This commit therefore creates the
corresponding sysfs entries.

Reported-by: Robin Randhawa <robin.randhawa@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:49 -07:00
Paul E. McKenney a488985851 rcu: Distinguish "rcuo" kthreads by RCU flavor
Currently, the per-no-CBs-CPU kthreads are named "rcuo" followed by
the CPU number, for example, "rcuo".  This is problematic given that
there are either two or three RCU flavors, each of which gets a per-CPU
kthread with exactly the same name.  This commit therefore introduces
a one-letter abbreviation for each RCU flavor, namely 'b' for RCU-bh,
'p' for RCU-preempt, and 's' for RCU-sched.  This abbreviation is used
to distinguish the "rcuo" kthreads, for example, for CPU 0 we would have
"rcuob/0", "rcuop/0", and "rcuos/0".

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
2013-03-26 08:04:48 -07:00
Paul E. McKenney 09c7b89062 rcu: Add event tracing for no-CBs CPUs' grace periods
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:46 -07:00
Paul E. McKenney 21e7a60874 rcu: Add event tracing for no-CBs CPUs' callback registration
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:45 -07:00
Paul E. McKenney dae6e64d2b rcu: Introduce proper blocking to no-CBs kthreads GP waits
Currently, the no-CBs kthreads do repeated timed waits for grace periods
to elapse.  This is crude and energy inefficient, so this commit allows
no-CBs kthreads to specify exactly which grace period they are waiting
for and also allows them to block for the entire duration until the
desired grace period completes.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:44 -07:00
Paul E. McKenney 911af505ef rcu: Provide compile-time control for no-CBs CPUs
Currently, the only way to specify no-CBs CPUs is via the rcu_nocbs
kernel command-line parameter.  This is inconvenient in some cases,
particularly for randconfig testing, so this commit adds a new set of
kernel configuration parameters.  CONFIG_RCU_NOCB_CPU_NONE (the default)
retains the old behavior, CONFIG_RCU_NOCB_CPU_ZERO offloads callback
processing from CPU 0 (along with any other CPUs specified by the
rcu_nocbs boot-time parameter), and CONFIG_RCU_NOCB_CPU_ALL offloads
callback processing from all CPUs.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-26 08:04:43 -07:00
Paul E. McKenney 6231069bda rcu: Add softirq-stall indications to stall-warning messages
If RCU's softirq handler is prevented from executing, an RCU CPU stall
warning can result.  Ways to prevent RCU's softirq handler from executing
include: (1) CPU spinning with interrupts disabled, (2) infinite loop
in some softirq handler, and (3) in -rt kernels, an infinite loop in a
set of real-time threads running at priorities higher than that of RCU's
softirq handler.

Because this situation can be difficult to track down, this commit causes
the count of RCU softirq handler invocations to be printed with RCU
CPU stall warnings.  This information does require some interpretation,
as now documented in Documentation/RCU/stallwarn.txt.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-03-13 14:43:56 -07:00
Paul E. McKenney 34ed62461a rcu: Remove restrictions on no-CBs CPUs
Currently, CPU 0 is constrained to not be a no-CBs CPU, and furthermore
at least one no-CBs CPU must remain online at any given time.  These
restrictions are problematic in some situations, such as cases where
all CPUs must run a real-time workload that needs to be insulated from
OS jitter and latencies due to RCU callback invocation.  This commit
therefore provides no-CBs CPUs a (very crude and energy-inefficient)
way to start and to wait for grace periods independently of the normal
RCU callback mechanisms.  This approach allows any or all of the CPUs to
be designated as no-CBs CPUs, and allows any proper subset of the CPUs
(whether no-CBs CPUs or not) to be offlined.

This commit also provides a fix for a locking bug spotted by Xie
ChanglongX <changlongx.xie@intel.com>.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-03-12 11:17:51 -07:00
Paul Gortmaker 1b0048a44c rcu: Make rcu_nocb_poll an early_param instead of module_param
The as-documented rcu_nocb_poll will fail to enable this feature
for two reasons.  (1) there is an extra "s" in the documented
name which is not in the code, and (2) since it uses module_param,
it really is expecting a prefix, akin to "rcutree.fanout_leaf"
and the prefix isn't documented.

However, there are several reasons why we might not want to
simply fix the typo and add the prefix:

1) we'd end up with rcutree.rcu_nocb_poll, and rather probably make
a change to rcutree.nocb_poll

2) if we did #1, then the prefix wouldn't be consistent with the
rcu_nocbs=<cpumap> parameter (i.e. one with, one without prefix)

3) the use of module_param in a header file is less than desired,
since it isn't immediately obvious that it will get processed
via rcutree.c and get the prefix from that (although use of
module_param_named() could clarify that.)

4) the implied export of /sys/module/rcutree/parameters/rcu_nocb_poll
data to userspace via module_param() doesn't really buy us anything,
as it is read-only and we can tell if it is enabled already without
it, since there is a printk at early boot telling us so.

In light of all that, just change it from a module_param() to an
early_setup() call, and worry about adding it to /sys later on if
we decide to allow a dynamic setting of it.

Also change the variable to be tagged as read_mostly, since it
will only ever be fiddled with at most, once at boot.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-01-08 14:12:19 -08:00
Paul Gortmaker 353af9c9a8 rcu: Prevent soft-lockup complaints about no-CBs CPUs
The wait_event() at the head of the rcu_nocb_kthread() can result in
soft-lockup complaints if the CPU in question does not register RCU
callbacks for an extended period.  This commit therefore changes
the wait_event() to a wait_event_interruptible().

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-01-08 14:12:18 -08:00
Paul E. McKenney c635a4e1c2 rcu: Separate accounting of callbacks from callback-free CPUs
Currently, callback invocations from callback-free CPUs are accounted to
the CPU that registered the callback, but using the same field that is
used for normal callbacks.  This makes it impossible to determine from
debugfs output whether callbacks are in fact being diverted.  This commit
therefore adds a separate ->n_nocbs_invoked field in the rcu_data structure
in which diverted callback invocations are counted.  RCU's debugfs tracing
still displays normal callback invocations using ci=, but displayed
diverted callbacks with nci=.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-16 10:05:57 -08:00
Paul E. McKenney 3fbfbf7a3b rcu: Add callback-free CPUs
RCU callback execution can add significant OS jitter and also can
degrade both scheduling latency and, in asymmetric multiprocessors,
energy efficiency.  This commit therefore adds the ability for selected
CPUs ("rcu_nocbs=" boot parameter) to have their callbacks offloaded
to kthreads.  If the "rcu_nocb_poll" boot parameter is also specified,
these kthreads will do polling, removing the need for the offloaded
CPUs to do wakeups.  At least one CPU must be doing normal callback
processing: currently CPU 0 cannot be selected as a no-CBs CPU.
In addition, attempts to offline the last normal-CBs CPU will fail.

This feature was inspired by Jim Houston's and Joe Korty's JRCU, and
this commit includes fixes to problems located by Fengguang Wu's
kbuild test robot.

[ paulmck: Added gfp.h include file as suggested by Fengguang Wu. ]

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-16 10:05:56 -08:00
Paul E. McKenney aac1cda34b Merge branches 'urgent.2012.10.27a', 'doc.2012.11.16a', 'fixes.2012.11.13a', 'srcu.2012.10.27a', 'stall.2012.11.13a', 'tracing.2012.11.08a' and 'idle.2012.10.24a' into HEAD
urgent.2012.10.27a: Fix for RCU user-mode transition (already in -tip).

doc.2012.11.08a: Documentation updates, most notably codifying the
	memory-barrier guarantees inherent to grace periods.

fixes.2012.11.13a: Miscellaneous fixes.

srcu.2012.10.27a: Allow statically allocated and initialized srcu_struct
	structures (courtesy of Lai Jiangshan).

stall.2012.11.13a: Add more diagnostic information to RCU CPU stall
	warnings, also decrease from 60 seconds to 21 seconds.

hotplug.2012.11.08a: Minor updates to CPU hotplug handling.

tracing.2012.11.08a: Improved debugfs tracing, courtesy of Michael Wang.

idle.2012.10.24a: Updates to RCU idle/adaptive-idle handling, including
	a boot parameter that maps normal grace periods to expedited.

Resolved conflict in kernel/rcutree.c due to side-by-side change.
2012-11-16 09:59:58 -08:00
Paul E. McKenney f0a0e6f282 rcu: Clarify memory-ordering properties of grace-period primitives
This commit explicitly states the memory-ordering properties of the
RCU grace-period primitives.  Although these properties were in some
sense implied by the fundmental property of RCU ("a grace period must
wait for all pre-existing RCU read-side critical sections to complete"),
stating it explicitly will be a great labor-saving device.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
2012-11-13 14:08:23 -08:00
Paul E. McKenney 7b2e6011f1 rcu: Rename ->onofflock to ->orphan_lock
The ->onofflock field in the rcu_state structure at one time synchronized
CPU-hotplug operations for RCU.  However, its scope has decreased over time
so that it now only protects the lists of orphaned RCU callbacks.  This
commit therefore renames it to ->orphan_lock to reflect its current use.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08 11:50:11 -08:00
Antti P Miettinen 3705b88db0 rcu: Add a module parameter to force use of expedited RCU primitives
There have been some embedded applications that would benefit from
use of expedited grace-period primitives.  In some ways, this is
similar to synchronize_net() doing either a normal or an expedited
grace period depending on lock state, but with control outside of
the kernel.

This commit therefore adds rcu_expedited boot and sysfs parameters
that cause the kernel to substitute expedited primitives for the
normal grace-period primitives.

[ paulmck: Add trace/event/rcu.h to kernel/srcu.c to avoid build error.
	   Get rid of infinite loop through contention path.]

Signed-off-by: Antti P Miettinen <amiettinen@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-10-23 14:54:08 -07:00
Paul E. McKenney 9a0c6fef42 rcu: Make RCU_FAST_NO_HZ handle adaptive ticks
The current implementation of RCU_FAST_NO_HZ tries reasonably hard to rid
the current CPU of RCU callbacks.  This is appropriate when the CPU is
entering idle, where it doesn't have much useful to do anyway, but is most
definitely not what you want when transitioning to user-mode execution.
This commit therefore detects the adaptive-tick case, and refrains from
burning CPU time getting rid of RCU callbacks in that case.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-26 15:44:02 +02:00
Paul E. McKenney 5217192b85 Merge remote-tracking branch 'tip/smp/hotplug' into next.2012.09.25b
The conflicts between kernel/rcutree.h and kernel/rcutree_plugin.h
were due to adjacent insertions and deletions, which were resolved
by simply accepting the changes on both branches.
2012-09-25 10:01:45 -07:00
Paul E. McKenney bda4ec9f6a Merge branches 'bigrt.2012.09.23a', 'doctorture.2012.09.23a', 'fixes.2012.09.23a', 'hotplug.2012.09.23a' and 'idlechop.2012.09.23a' into HEAD
bigrt.2012.09.23a contains additional commits to reduce scheduling latency
	from RCU on huge systems (many hundrends or thousands of CPUs).

doctorture.2012.09.23a contains documentation changes and rcutorture fixes.

fixes.2012.09.23a contains miscellaneous fixes.

hotplug.2012.09.23a contains CPU-hotplug-related changes.

idle.2012.09.23a fixes architectures for which RCU no longer considered
	the idle loop to be a quiescent state due to earlier
	adaptive-dynticks changes.  Affected architectures are alpha,
	cris, frv, h8300, m32r, m68k, mn10300, parisc, score, xtensa,
	and ia64.
2012-09-24 20:02:22 -07:00
Paul E. McKenney 86f343b50b rcu: Fix CONFIG_RCU_FAST_NO_HZ stall warning message
The print_cpu_stall_fast_no_hz() function attempts to print -1 when
the ->idle_gp_timer is not pending, but unsigned arithmetic causes it
to instead print ULONG_MAX, which is 4294967295 on 32-bit systems and
18446744073709551615 on 64-bit systems.  Neither of these are the most
reader-friendly values, so this commit instead causes "timer not pending"
to be printed when ->idle_gp_timer is not pending.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-23 07:42:52 -07:00
Paul E. McKenney 5fd4dc068c rcu: Avoid rcu_print_detail_task_stall_rnp() segfault
The rcu_print_detail_task_stall_rnp() function invokes
rcu_preempt_blocked_readers_cgp() to verify that there are some preempted
RCU readers blocking the current grace period outside of the protection
of the rcu_node structure's ->lock.  This means that the last blocked
reader might exit its RCU read-side critical section and remove itself
from the ->blkd_tasks list before the ->lock is acquired, resulting in
a segmentation fault when the subsequent code attempts to dereference
the now-NULL gp_tasks pointer.

This commit therefore moves the test under the lock.  This will not
have measurable effect on lock contention because this code is invoked
only when printing RCU CPU stall warnings, in other words, in the common
case, never.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-23 07:42:50 -07:00
Paul E. McKenney 115f7a7ca0 rcu: Apply for_each_rcu_flavor() to increment_cpu_stall_ticks()
The increment_cpu_stall_ticks() function listed each RCU flavor
explicitly, with an ifdef to handle preemptible RCU.  This commit
therefore applies for_each_rcu_flavor() to save a line of code.

Because this commit switches from a code-based enumeration of the
flavors of RCU to an rcu_state-list-based enumeration, it is no longer
possible to apply __get_cpu_var() to the per-CPU rcu_data structures.
We instead use __this_cpu_var() on the rcu_state structure's ->rda field
that references the corresponding rcu_data structures.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-23 07:42:50 -07:00
Paul E. McKenney b065a85354 rcu: Fix obsolete rcu_initiate_boost() header comment
Commit 1217ed1b (rcu: permit rcu_read_unlock() to be called while holding
runqueue locks) made rcu_initiate_boost() restore irq state when releasing
the rcu_node structure's ->lock, but failed to update the header comment
accordingly.  This commit therefore brings the header comment up to date.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:42:50 -07:00
Paul E. McKenney 5cc900cf55 rcu: Improve boost selection when moving tasks to root rcu_node
The rcu_preempt_offline_tasks() moves all tasks queued on a given leaf
rcu_node structure to the root rcu_node, which is done when the last CPU
corresponding the the leaf rcu_node structure goes offline.  Now that
RCU-preempt's synchronize_rcu_expedited() implementation blocks CPU-hotplug
operations during the initialization of each rcu_node structure's
->boost_tasks pointer, rcu_preempt_offline_tasks() can do a better job
of setting the root rcu_node's ->boost_tasks pointer.

The key point is that rcu_preempt_offline_tasks() runs as part of the
CPU-hotplug process, so that a concurrent synchronize_rcu_expedited()
is guaranteed to either have not started on the one hand (in which case
there is no boosting on behalf of the expedited grace period) or to be
completely initialized on the other (in which case, in the absence of
other priority boosting, all ->boost_tasks pointers will be initialized).
Therefore, if rcu_preempt_offline_tasks() finds that the ->boost_tasks
pointer is equal to the ->exp_tasks pointer, it can be sure that it is
correctly placed.

In the case where there was boosting ongoing at the time that the
synchronize_rcu_expedited() function started, different nodes might start
boosting the tasks blocking the expedited grace period at different times.
In this mixed case, the root node will either be boosting tasks for
the expedited grace period already, or it will start as soon as it gets
done boosting for the normal grace period -- but in this latter case,
the root node's tasks needed to be boosted in any case.

This commit therefore adds a check of the ->boost_tasks pointer against
the ->exp_tasks pointer to the list that prevents updating ->boost_tasks.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:42:50 -07:00
Paul E. McKenney 1e3fd2b38c rcu: Properly initialize ->boost_tasks on CPU offline
When rcu_preempt_offline_tasks() clears tasks from a leaf rcu_node
structure, it does not NULL out the structure's ->boost_tasks field.
This commit therefore fixes this issue.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23 07:42:49 -07:00