Commit Graph

706 Commits

Author SHA1 Message Date
Damien Le Moal b49773e7bc block: Disable write plugging for zoned block devices
Simultaneously writing to a sequential zone of a zoned block device
from multiple contexts requires mutual exclusion for BIO issuing to
ensure that writes happen sequentially. However, even for a well
behaved user correctly implementing such synchronization, BIO plugging
may interfere and result in BIOs from the different contextx to be
reordered if plugging is done outside of the mutual exclusion section,
e.g. the plug was started by a function higher in the call chain than
the function issuing BIOs.

         Context A                     Context B

   | blk_start_plug()
   | ...
   | seq_write_zone()
     | mutex_lock(zone)
     | bio-0->bi_iter.bi_sector = zone->wp
     | zone->wp += bio_sectors(bio-0)
     | submit_bio(bio-0)
     | bio-1->bi_iter.bi_sector = zone->wp
     | zone->wp += bio_sectors(bio-1)
     | submit_bio(bio-1)
     | mutex_unlock(zone)
     | return
   | -----------------------> | seq_write_zone()
  				| mutex_lock(zone)
     				| bio-2->bi_iter.bi_sector = zone->wp
     				| zone->wp += bio_sectors(bio-2)
				| submit_bio(bio-2)
				| mutex_unlock(zone)
   | <------------------------- |
   | blk_finish_plug()

In the above example, despite the mutex synchronization ensuring the
correct BIO issuing order 0, 1, 2, context A BIOs 0 and 1 end up being
issued after BIO 2 of context B, when the plug is released with
blk_finish_plug().

While this problem can be addressed using the blk_flush_plug_list()
function (in the above example, the call must be inserted before the
zone mutex lock is released), a simple generic solution in the block
layer avoid this additional code in all zoned block device user code.
The simple generic solution implemented with this patch is to introduce
the internal helper function blk_mq_plug() to access the current
context plug on BIO submission. This helper returns the current plug
only if the target device is not a zoned block device or if the BIO to
be plugged is not a write operation. Otherwise, the caller context plug
is ignored and NULL returned, resulting is all writes to zoned block
device to never be plugged.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10 14:18:01 -06:00
Bart Van Assche 970d168de6 blk-mq: simplify blk_mq_make_request()
Move the blk_mq_bio_to_request() call in front of the if-statement.

Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-02 21:03:38 -06:00
Bart Van Assche c05f42206f blk-mq: remove blk_mq_put_ctx()
No code that occurs between blk_mq_get_ctx() and blk_mq_put_ctx() depends
on preemption being disabled for its correctness. Since removing the CPU
preemption calls does not measurably affect performance, simplify the
blk-mq code by removing the blk_mq_put_ctx() function and also by not
disabling preemption in blk_mq_get_ctx().

Cc: Hannes Reinecke <hare@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-02 21:03:27 -06:00
Christoph Hellwig 14ccb66b3f block: remove the bi_phys_segments field in struct bio
We only need the number of segments in the blk-mq submission path.
Remove the field from struct bio, and return it from a variant of
blk_queue_split instead of that it can passed as an argument to
those functions that need the value.

This also means we stop recounting segments except for cloning
and partial segments.

To keep the number of arguments in this how path down remove
pointless struct request_queue arguments from any of the functions
that had it and grew a nr_segs argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 10:29:22 -06:00
Christoph Hellwig f924cddebc block: remove blk_init_request_from_bio
lightnvm should have never used this function, as it is sending
passthrough requests, so switch it to blk_rq_append_bio like all the
other passthrough request users.  Inline blk_init_request_from_bio into
the only remaining caller.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 10:29:22 -06:00
Jes Sorensen 41de54c648 blk-mq: Fix memory leak in error handling
If blk_mq_init_allocated_queue() fails, make sure to free the poll
stat callback struct allocated.

Signed-off-by: Jes Sorensen <jsorensen@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-29 14:33:04 -06:00
Bob Liu 7996a8b551 blk-mq: fix hang caused by freeze/unfreeze sequence
The following is a description of a hang in blk_mq_freeze_queue_wait().
The hang happens on attempt to freeze a queue while another task does
queue unfreeze.

The root cause is an incorrect sequence of percpu_ref_resurrect() and
percpu_ref_kill() and as a result those two can be swapped:

 CPU#0                         CPU#1
 ----------------              -----------------
 q1 = blk_mq_init_queue(shared_tags)

                                q2 = blk_mq_init_queue(shared_tags):
                                  blk_mq_add_queue_tag_set(shared_tags):
                                    blk_mq_update_tag_set_depth(shared_tags):
				     list_for_each_entry()
                                      blk_mq_freeze_queue(q1)
                                       > percpu_ref_kill()
                                       > blk_mq_freeze_queue_wait()

 blk_cleanup_queue(q1)
  blk_mq_freeze_queue(q1)
   > percpu_ref_kill()
                 ^^^^^^ freeze_depth can't guarantee the order

                                      blk_mq_unfreeze_queue()
                                        > percpu_ref_resurrect()

   > blk_mq_freeze_queue_wait()
                 ^^^^^^ Hang here!!!!

This wrong sequence raises kernel warning:
percpu_ref_kill_and_confirm called more than once on blk_queue_usage_counter_release!
WARNING: CPU: 0 PID: 11854 at lib/percpu-refcount.c:336 percpu_ref_kill_and_confirm+0x99/0xb0

But the most unpleasant effect is a hang of a blk_mq_freeze_queue_wait(),
which waits for a zero of a q_usage_counter, which never happens
because percpu-ref was reinited (instead of being killed) and stays in
PERCPU state forever.

How to reproduce:
 - "insmod null_blk.ko shared_tags=1 nr_devices=0 queue_mode=2"
 - cpu0: python Script.py 0; taskset the corresponding process running on cpu0
 - cpu1: python Script.py 1; taskset the corresponding process running on cpu1

 Script.py:
 ------
 #!/usr/bin/python3

import os
import sys

while True:
    on = "echo 1 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
    off = "echo 0 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
    os.system(on)
    os.system(off)
------

This bug was first reported and fixed by Roman, previous discussion:
[1] Message id: 1443287365-4244-7-git-send-email-akinobu.mita@gmail.com
[2] Message id: 1443563240-29306-6-git-send-email-tj@kernel.org
[3] https://patchwork.kernel.org/patch/9268199/

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23 10:25:26 -06:00
Ming Lei 2f8f1336a4 blk-mq: always free hctx after request queue is freed
In normal queue cleanup path, hctx is released after request queue
is freed, see blk_mq_release().

However, in __blk_mq_update_nr_hw_queues(), hctx may be freed because
of hw queues shrinking. This way is easy to cause use-after-free,
because: one implicit rule is that it is safe to call almost all block
layer APIs if the request queue is alive; and one hctx may be retrieved
by one API, then the hctx can be freed by blk_mq_update_nr_hw_queues();
finally use-after-free is triggered.

Fixes this issue by always freeing hctx after releasing request queue.
If some hctxs are removed in blk_mq_update_nr_hw_queues(), introduce
a per-queue list to hold them, then try to resuse these hctxs if numa
node is matched.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:08 -06:00
Ming Lei 7c6c5b7c91 blk-mq: split blk_mq_alloc_and_init_hctx into two parts
Split blk_mq_alloc_and_init_hctx into two parts, and one is
blk_mq_alloc_hctx() for allocating all hctx resources, another
is blk_mq_init_hctx() for initializing hctx, which serves as
counter-part of blk_mq_exit_hctx().

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K . Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:06 -06:00
Ming Lei c7e2d94b3d blk-mq: free hw queue's resource in hctx's release handler
Once blk_cleanup_queue() returns, tags shouldn't be used any more,
because blk_mq_free_tag_set() may be called. Commit 45a9c9d909
("blk-mq: Fix a use-after-free") fixes this issue exactly.

However, that commit introduces another issue. Before 45a9c9d909,
we are allowed to run queue during cleaning up queue if the queue's
kobj refcount is held. After that commit, queue can't be run during
queue cleaning up, otherwise oops can be triggered easily because
some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue().

We have invented ways for addressing this kind of issue before, such as:

	8dc765d438 ("SCSI: fix queue cleanup race before queue initialization is done")
	c2856ae2f3 ("blk-mq: quiesce queue before freeing queue")

But still can't cover all cases, recently James reports another such
kind of issue:

	https://marc.info/?l=linux-scsi&m=155389088124782&w=2

This issue can be quite hard to address by previous way, given
scsi_run_queue() may run requeues for other LUNs.

Fixes the above issue by freeing hctx's resources in its release handler, and this
way is safe becasue tags isn't needed for freeing such hctx resource.

This approach follows typical design pattern wrt. kobject's release handler.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reported-by: James Smart <james.smart@broadcom.com>
Fixes: 45a9c9d909 ("blk-mq: Fix a use-after-free")
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:05 -06:00
Ming Lei fbc2a15e34 blk-mq: move cancel of requeue_work into blk_mq_release
With holding queue's kobject refcount, it is safe for driver
to schedule requeue. However, blk_mq_kick_requeue_list() may
be called after blk_sync_queue() is done because of concurrent
requeue activities, then requeue work may not be completed when
freeing queue, and kernel oops is triggered.

So moving the cancel of requeue_work into blk_mq_release() for
avoiding race between requeue and freeing queue.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:04 -06:00
Raul E Rangel 273938bf7a block: fix function name in comment
The comment was out of date.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-02 15:51:52 -06:00
Christoph Hellwig 3dcf60bcb6 block: add SPDX tags to block layer files missing licensing information
Various block layer files do not have any licensing information at all.
Add SPDX tags for the default kernel GPLv2 license to those.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30 16:12:03 -06:00
Jens Axboe 77f1e0a52d bfq: update internal depth state when queue depth changes
A previous commit moved the shallow depth and BFQ depth map calculations
to be done at init time, moving it outside of the hotter IO path. This
potentially causes hangs if the users changes the depth of the scheduler
map, by writing to the 'nr_requests' sysfs file for that device.

Add a blk-mq-sched hook that allows blk-mq to inform the scheduler if
the depth changes, so that the scheduler can update its internal state.

Tested-by: Kai Krakow <kai@kaishome.de>
Reported-by: Paolo Valente <paolo.valente@linaro.org>
Fixes: f0635b8a41 ("bfq: calculate shallow depths at init time")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-13 19:08:22 -06:00
Ming Lei 1b8f21b74c blk-mq: introduce blk_mq_complete_request_sync()
In NVMe's error handler, follows the typical steps of tearing down
hardware for recovering controller:

1) stop blk_mq hw queues
2) stop the real hw queues
3) cancel in-flight requests via
	blk_mq_tagset_busy_iter(tags, cancel_request, ...)
cancel_request():
	mark the request as abort
	blk_mq_complete_request(req);
4) destroy real hw queues

However, there may be race between #3 and #4, because blk_mq_complete_request()
may run q->mq_ops->complete(rq) remotelly and asynchronously, and
->complete(rq) may be run after #4.

This patch introduces blk_mq_complete_request_sync() for fixing the
above race.

Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: James Smart <james.smart@broadcom.com>
Cc: linux-nvme@lists.infradead.org
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-10 09:57:33 -06:00
Bart Van Assche fd9c40f64c block: Revert v5.0 blk_mq_request_issue_directly() changes
blk_mq_try_issue_directly() can return BLK_STS*_RESOURCE for requests that
have been queued. If that happens when blk_mq_try_issue_directly() is called
by the dm-mpath driver then dm-mpath will try to resubmit a request that is
already queued and a kernel crash follows. Since it is nontrivial to fix
blk_mq_request_issue_directly(), revert the blk_mq_request_issue_directly()
changes that went into kernel v5.0.

This patch reverts the following commits:
* d6a51a97c0 ("blk-mq: replace and kill blk_mq_request_issue_directly") # v5.0.
* 5b7a6f128a ("blk-mq: issue directly with bypass 'false' in blk_mq_sched_insert_requests") # v5.0.
* 7f556a44e6 ("blk-mq: refactor the code of issue request directly") # v5.0.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: James Smart <james.smart@broadcom.com>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org>
Reported-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Fixes: 7f556a44e6 ("blk-mq: refactor the code of issue request directly") # v5.0.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-05 09:40:46 -06:00
Dongli Zhang bcc816dfe5 blk-mq: do not reset plug->rq_count before the list is sorted
We would never be able to sort the list if we first reset plug->rq_count
which is used in conditional check later.

Fixes: ce5b009cff ("block: improve logic around when to sort a plug list")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-04 08:37:34 -06:00
Yufen Yu ff3b74b8e1 blk-mq: add trace block plug and unplug for multiple queues
For now, we just trace plug for single queue device or drivers
provide .commit_rqs, and have not trace plug for multiple queues
device. But, unplug events will be recorded when call
blk_mq_flush_plug_list(). Then, trace events will be asymmetrical,
just have unplug and without plug.

This patch add trace plug and unplug for multiple queues device in
blk_mq_make_request(). After that, we can accurately trace plug and
unplug for multiple queues.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-02 08:57:05 -06:00
Shenghui Wang b9a1ff504b block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx
kfree() can leak the hctx->fq->flush_rq field.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-02 08:20:06 -06:00
Jens Axboe e861857545 blk-mq: fix sbitmap ws_active for shared tags
We now wrap sbitmap waitqueues in an active counter, so we can avoid
iterating wakeups unless we have waiters there. This works as long as
everyone that's manipulating the waitqueues use the proper helpers. For
the tag wait case for shared tags, however, we add ourselves to the
waitqueue without incrementing/decrementing the ->ws_active count. This
means that wakeups can take a long time to happen.

Fix this by manually doing the inc/dec as needed for the wait queue
handling.

Reported-by: Michael Leun <kbug@newton.leun.net>
Tested-by: Michael Leun <kbug@newton.leun.net>
Cc: stable@vger.kernel.org
Reviewed-by: Omar Sandoval <osandov@fb.com>
Fixes: 5d2ee7122c ("sbitmap: optimize wakeup check")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-25 13:05:47 -06:00
Yufen Yu 85fae294e1 blk-mq: update comment for blk_mq_hctx_has_pending()
For now, blk_mq_hctx_has_pending() checks any of ctx, hctx->dispatch
or io scheduler have pending work. So, update the comment accordingly.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-24 10:26:17 -06:00
Bart Van Assche e6c987120e block: Unexport blk_mq_add_to_requeue_list()
This function is not used outside the block layer core. Hence unexport it.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-20 14:19:36 -06:00
Yufen Yu 29ece8b435 block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
For q->poll_nsec == -1, means doing classic poll, not hybrid poll.
We introduce a new flag BLK_MQ_POLL_CLASSIC to replace -1, which
may make code much easier to read.

Additionally, since val is an int obtained with kstrtoint(), val can be
a negative value other than -1, so return -EINVAL for that case.

Thanks to Damien Le Moal for some good suggestion.

Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-20 14:02:07 -06:00
Yufen Yu 684b73245c blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
Let blk_mq_mark_tag_wait() use the blk_mq_sched_mark_restart_hctx()
to set BLK_MQ_S_SCHED_RESTART.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-03-18 08:14:51 -06:00
Linus Torvalds 92fff53b71 SCSI misc on 20190306
This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
 hisi_sas, target/iscsi and target/core.  Additionally Christoph
 refactored gdth as part of the dma changes.  The major mid-layer
 change this time is the removal of bidi commands and with them the
 whole of the osd/exofs driver and filesystem.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXIC54SYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishT1GAPwJEV23
 ExPiPsnuVgKj49nLTagZ3rILRQcYNbL+MNYqxQEA0cT8FHzSDBfWY5OKPNE+RQ8z
 f69LpXGmMpuagKGvvd4=
 =Fhy1
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
  hisi_sas, target/iscsi and target/core.

  Additionally Christoph refactored gdth as part of the dma changes. The
  major mid-layer change this time is the removal of bidi commands and
  with them the whole of the osd/exofs driver and filesystem. This is a
  major simplification for block and mq in particular"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
  scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
  scsi: cxgb4i: get pf number from lldi->pf
  scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
  scsi: mpt3sas: Add missing breaks in switch statements
  scsi: aacraid: Fix missing break in switch statement
  scsi: kill command serial number
  scsi: csiostor: drop serial_number usage
  scsi: mvumi: use request tag instead of serial_number
  scsi: dpt_i2o: remove serial number usage
  scsi: st: osst: Remove negative constant left-shifts
  scsi: ufs-bsg: Allow reading descriptors
  scsi: ufs: Allow reading descriptor via raw upiu
  scsi: ufs-bsg: Change the calling convention for write descriptor
  scsi: ufs: Remove unused device quirks
  Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
  scsi: megaraid_sas: Remove a bunch of set but not used variables
  scsi: clean obsolete return values of eh_timed_out
  scsi: sd: Optimal I/O size should be a multiple of physical block size
  scsi: MAINTAINERS: SCSI initiator and target tweaks
  scsi: fcoe: make use of fip_mode enum complete
  ...
2019-03-09 16:53:47 -08:00
Linus Torvalds 80201fe175 for-5.1/block-20190302
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlx63XIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpp2vEACfrrQsap7R+Av28mmXpmXi2FPa3g5Tev1t
 yYjK2qHvhlMZjPTYw3hCmbYdDDczlF7PEgSE2x2DjdcsYapb8Fy1lZ2X16c7ztBR
 HD/t9b5AVSQsczZzKgv3RqsNtTnjzS5V0A8XH8FAP2QRgiwDMwSN6G0FP0JBLbE/
 ZgxQrH1Iy1F33Wz4hI3Z7dEghKPZrH1IlegkZCEu47q9SlWS76qUetSy2GEtchOl
 3Lgu54mQZyVdI5/QZf9DyMDLF6dIz3tYU2qhuo01AHjGRCC72v86p8sIiXcUr94Q
 8pbegJhJ/g8KBol9Qhv3+pWG/QUAZwi/ZwasTkK+MJ4klRXfOrznxPubW1z6t9Vn
 QRo39Po5SqqP0QWAscDxCFjESIQlWlKa+LZurJL7DJDCUGrSgzTpnVwFqKwc5zTP
 HJa5MT2tEeL2TfUYRYCfh0ZV0elINdHA1y1klDBh38drh4EWr2gW8xdseGYXqRjh
 fLgEpoF7VQ8kTvxKN+E4jZXkcZmoLmefp0ZyAbblS6IawpPVC7kXM9Fdn2OU8f2c
 fjVjvSiqxfeN6dnpfeLDRbbN9894HwgP/LPropJOQ7KmjCorQq5zMDkAvoh3tElq
 qwluRqdBJpWT/F05KweY+XVW8OawIycmUWqt6JrVNoIDAK31auHQv47kR0VA4OvE
 DRVVhYpocw==
 =VBaU
 -----END PGP SIGNATURE-----

Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "Not a huge amount of changes in this round, the biggest one is that we
  finally have Mings multi-page bvec support merged. Apart from that,
  this pull request contains:

   - Small series that avoids quiescing the queue for sysfs changes that
     match what we currently have (Aleksei)

   - Series of bcache fixes (via Coly)

   - Series of lightnvm fixes (via Mathias)

   - NVMe pull request from Christoph. Nothing major, just SPDX/license
     cleanups, RR mp policy (Hannes), and little fixes (Bart,
     Chaitanya).

   - BFQ series (Paolo)

   - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
     for the fast path (Jianchao)

   - fops->iopoll() added for async IO polling, this is a feature that
     the upcoming io_uring interface will use (Christoph, me)

   - Partition scan loop fixes (Dongli)

   - mtip32xx conversion from managed resource API (Christoph)

   - cdrom registration race fix (Guenter)

   - MD pull from Song, two minor fixes.

   - Various documentation fixes (Marcos)

   - Multi-page bvec feature. This brings a lot of nice improvements
     with it, like more efficient splitting, larger IOs can be supported
     without growing the bvec table size, and so on. (Ming)

   - Various little fixes to core and drivers"

* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
  block: fix updating bio's front segment size
  block: Replace function name in string with __func__
  nbd: propagate genlmsg_reply return code
  floppy: remove set but not used variable 'q'
  null_blk: fix checking for REQ_FUA
  block: fix NULL pointer dereference in register_disk
  fs: fix guard_bio_eod to check for real EOD errors
  blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
  block: optimize bvec iteration in bvec_iter_advance
  block: introduce mp_bvec_for_each_page() for iterating over page
  block: optimize blk_bio_segment_split for single-page bvec
  block: optimize __blk_segment_map_sg() for single-page bvec
  block: introduce bvec_nth_page()
  iomap: wire up the iopoll method
  block: add bio_set_polled() helper
  block: wire up block device iopoll method
  fs: add an iopoll method to struct file_operations
  loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
  loop: do not print warn message if partition scan is successful
  block: bounce: make sure that bvec table is updated
  ...
2019-03-08 14:12:17 -08:00
Dongli Zhang 7d76f8562f blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
Replace set->map[0] with set->map[HCTX_TYPE_DEFAULT] to avoid hardcoding.

Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-28 13:57:32 -07:00
Ming Lei 2705c93742 block: kill QUEUE_FLAG_NO_SG_MERGE
Since bdced438ac ("block: setup bi_phys_segments after splitting"),
physical segment number is mainly figured out in blk_queue_split() for
fast path, and the flag of BIO_SEG_VALID is set there too.

Now only blk_recount_segments() and blk_recalc_rq_segments() use this
flag.

Basically blk_recount_segments() is bypassed in fast path given BIO_SEG_VALID
is set in blk_queue_split().

For another user of blk_recalc_rq_segments():

- run in partial completion branch of blk_update_request, which is an unusual case

- run in blk_cloned_rq_check_limits(), still not a big problem if the flag is killed
since dm-rq is the only user.

Multi-page bvec is enabled now, not doing S/G merging is rather pointless with the
current setup of the I/O path, as it isn't going to save you a significant amount
of cycles.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-15 08:40:12 -07:00
Jianchao Wang aef1897cd3 blk-mq: insert rq with DONTPREP to hctx dispatch list when requeue
When requeue, if RQF_DONTPREP, rq has contained some driver
specific data, so insert it to hctx dispatch list to avoid any
merge. Take scsi as example, here is the trace event log (no
io scheduler, because RQF_STARTED would prevent merging),

   kworker/0:1H-339   [000] ...1  2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H]
scsi_inert_test-1987  [000] ....  2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test]
scsi_inert_test-1987  [000] ...2  2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test]
   kworker/0:1H-339   [000] ....  2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H]
scsi_inert_test-1996  [000] ..s1  2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0]
scsi_inert_test-1996  [000] .Ns1  2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0]
   kworker/0:1H-339   [000] ...1  2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
   kworker/0:1H-339   [000] ...1  2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
scsi_inert_test-1986  [000] ..s1  2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0]

(32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP.
Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP,
the sdb only contained the part of (32768 + 8), then only that part
was completed. The lucky thing was that scsi_io_completion detected
it and requeued the remaining part. So we didn't get corrupted data.
However, the requeue of (32776 + 8) is not expected.

Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 19:51:52 -07:00
Aleksei Zakharov e5fa81408f block: avoid setting nr_requests to current value
There's no reason to freeze queue and set nr_requests value
if current value is the same.

Signed-off-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-08 12:43:25 -07:00
Christoph Hellwig 8b3238cabd scsi: block: remove bidi support
Unused now, and another field in struct request bites the dust.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05 21:30:27 -05:00
Christoph Hellwig 69ed175c19 scsi: block: remove req->special
No users left.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-05 21:30:09 -05:00
Jianchao Wang bb94aea144 blk-mq: save default hctx into ctx->hctxs for not-supported type
Currently, we check whether the hctx type is supported every time
in hot path. Actually, this is not necessary, we could save the
default hctx into ctx->hctxs if the type is not supported when
map swqueues and use it directly with ctx->hctxs[type].

We also needn't check whether the poll is enabled or not, because
the caller would clear the REQ_HIPRI in that case.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-01 08:33:43 -07:00
Jianchao Wang 8ccdf4a377 blk-mq: save queue mapping result into ctx directly
Currently, the queue mapping result is saved in a two-dimensional
array. In the hot path, to get a hctx, we need do following:

  q->queue_hw_ctx[q->tag_set->map[type].mq_map[cpu]]

This isn't very efficient. We could save the queue mapping result into
ctx directly with different hctx type, like,

  ctx->hctxs[type]

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-01 08:33:04 -07:00
Ming Lei 7809167da5 block: don't lose track of REQ_INTEGRITY flag
We need to pass bio->bi_opf after bio intergrity preparing, otherwise
the flag of REQ_INTEGRITY may not be set on the allocated request, then
breaks block integrity.

Fixes: f9afca4d36 ("blk-mq: pass in request/bio flags to queue mapping")
Cc: Hannes Reinecke <hare@suse.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-16 07:28:10 -07:00
Sagi Grimberg 7b7ab780a0 block: make request_to_qc_t public
block consumers will need it for polling requests that
are sent with blk_execute_rq_nowait. Also, get rid of
blk_tag_to_qc_t and open-code it instead.

Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-18 17:50:47 +01:00
Ming Lei cd19181bf9 blk-mq: enable IO poll if .nr_queues of type poll > 0
The queue mapping of type poll only exists when set->map[HCTX_TYPE_POLL].nr_queues
is bigger than zero, so enhance the constraint by checking .nr_queues of type poll
before enabling IO poll.

Otherwise IO race & timeout can be observed when running block/007.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17 21:35:07 -07:00
Jens Axboe 3c94d83cb3 blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()
There's a single user of this function, dm, and dm just wants
to check if IO is inflight, not that it's just allocated.

This fixes a hang with srp/002 in blktests with dm, where it tries
to suspend but waits for inflight IO to finish first. As it checks
for just allocated requests, this fails.

Tested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17 21:31:42 -07:00
Ming Lei e5edd5f298 blk-mq: skip zero-queue maps in blk_mq_map_swqueue
From 7e849dd9cf ("nvme-pci: don't share queue maps"), the mapping
table won't be initialized actually if map->nr_queues is zero, so
we can't use blk_mq_map_queue_type() to retrieve hctx any more.

This way still may cause broken mapping, fix it by skipping zero-queues
maps in blk_mq_map_swqueue().

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17 11:19:55 -07:00
Ming Lei c16d6b5a9f blk-mq: fix dispatch from sw queue
When a request is added to rq list of sw queue(ctx), the rq may be from
a different type of hctx, especially after multi queue mapping is
introduced.

So when dispach request from sw queue via blk_mq_flush_busy_ctxs() or
blk_mq_dequeue_from_ctx(), one request belonging to other queue type of
hctx can be dispatched to current hctx in case that read queue or poll
queue is enabled.

This patch fixes this issue by introducing per-queue-type list.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>

Changed by me to not use separately cacheline aligned lists, just
place them all in the same cacheline where we had just the one list
and lock before.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17 11:19:54 -07:00
Ming Lei 07b35eb5a3 blk-mq: fix allocation for queue mapping table
Type of each element in queue mapping table is 'unsigned int,
intead of 'struct blk_mq_queue_map)', so fix it.

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-17 05:37:23 -07:00
Jianchao Wang d6a51a97c0 blk-mq: replace and kill blk_mq_request_issue_directly
Replace blk_mq_request_issue_directly with blk_mq_try_issue_directly
in blk_insert_cloned_request and kill it as nobody uses it any more.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16 08:33:58 -07:00
Jianchao Wang 5b7a6f128a blk-mq: issue directly with bypass 'false' in blk_mq_sched_insert_requests
It is not necessary to issue request directly with bypass 'true'
in blk_mq_sched_insert_requests and handle the non-issued requests
itself. Just set bypass to 'false' and let blk_mq_try_issue_directly
handle them totally. Remove the blk_rq_can_direct_dispatch check,
because blk_mq_try_issue_directly can handle it well.If request is
direct-issued unsuccessfully, insert the reset.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16 08:33:57 -07:00
Jianchao Wang 7f556a44e6 blk-mq: refactor the code of issue request directly
Merge blk_mq_try_issue_directly and __blk_mq_try_issue_directly
into one interface to unify the interfaces to issue requests
directly. The merged interface takes over the requests totally,
it could insert, end or do nothing based on the return value of
.queue_rq and 'bypass' parameter. Then caller needn't any other
handling any more and then code could be cleaned up.

And also the commit c616cbee ( blk-mq: punt failed direct issue
to dispatch list ) always inserts requests to hctx dispatch list
whenever get a BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE, this is
overkill and will harm the merging. We just need to do that for
the requests that has been through .queue_rq. This patch also
could fix this.

Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-16 08:33:57 -07:00
Mikulas Patocka e016b78201 block: return just one value from part_in_flight
The previous patches deleted all the code that needed the second value
returned from part_in_flight - now the kernel only uses the first value.

Consequently, part_in_flight (and blk_mq_in_flight) may be changed so that
it only returns one value.

This patch just refactors the code, there's no functional change.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-10 08:30:38 -07:00
Jens Axboe 96f774106e Linux 4.20-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwNpb0eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwGwH/00UHnXfxww3ixxz
 zwTVDzptA6SPm6s84yJOWatM5fXhPiAltZaHSYF9lzRzNU71NCq7Frhq3fQUIXKM
 OxqDn9nfSTWcjWTk2q5n2keyRV/KIn67YX7UgqFc1bO/mqtVjEgNWaMyblhI+e9E
 giu1ZXayHr43jK1cDOmGExZubXUq7Vsc9TOlrd+d2SwIqeEP7TCMrPhnHDwCNvX2
 UU5dtANpVzGtHaBcr37wJj+L8kODCc0f+PQ3g2ar5jTHst5SLlHp2u0AMRnUmgdi
 VkGx+mu/uk8mtwUqMIMqhplklVoqK6LTeLqsY5Xt32SKruw9UqyJGdphLjW2QP/g
 MkmA1lI=
 =7kaD
 -----END PGP SIGNATURE-----

Merge tag 'v4.20-rc6' into for-4.21/block

Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-09 17:45:40 -07:00
Ming Lei 5938870247 blk-mq: re-build queue map in case of kdump kernel
Now almost all .map_queues() implementation based on managed irq
affinity doesn't update queue mapping and it just retrieves the
old built mapping, so if nr_hw_queues is changed, the mapping talbe
includes stale mapping. And only blk_mq_map_queues() may rebuild
the mapping talbe.

One case is that we limit .nr_hw_queues as 1 in case of kdump kernel.
However, drivers often builds queue mapping before allocating tagset
via pci_alloc_irq_vectors_affinity(), but set->nr_hw_queues can be set
as 1 in case of kdump kernel, so wrong queue mapping is used, and
kernel panic[1] is observed during booting.

This patch fixes the kernel panic triggerd on nvme by rebulding the
mapping table via blk_mq_map_queues().

[1] kernel panic log
[    4.438371] nvme nvme0: 16/0/0 default/read/poll queues
[    4.443277] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
[    4.444681] PGD 0 P4D 0
[    4.445367] Oops: 0000 [#1] SMP NOPTI
[    4.446342] CPU: 3 PID: 201 Comm: kworker/u33:10 Not tainted 4.20.0-rc5-00664-g5eb02f7ee1eb-dirty #459
[    4.447630] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014
[    4.448689] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[    4.449368] RIP: 0010:blk_mq_map_swqueue+0xfb/0x222
[    4.450596] Code: 04 f5 20 28 ef 81 48 89 c6 39 55 30 76 93 89 d0 48 c1 e0 04 48 03 83 f8 05 00 00 48 8b 00 42 8b 3c 28 48 8b 43 58 48 8b 04 f8 <48> 8b b8 98 00 00 00 4c 0f a3 37 72 42 f0 4c 0f ab 37 66 8b b8 f6
[    4.453132] RSP: 0018:ffffc900023b3cd8 EFLAGS: 00010286
[    4.454061] RAX: 0000000000000000 RBX: ffff888174448000 RCX: 0000000000000001
[    4.456480] RDX: 0000000000000001 RSI: ffffe8feffc506c0 RDI: 0000000000000001
[    4.458750] RBP: ffff88810722d008 R08: ffff88817647a880 R09: 0000000000000002
[    4.464580] R10: ffffc900023b3c10 R11: 0000000000000004 R12: ffff888174448538
[    4.467803] R13: 0000000000000004 R14: 0000000000000001 R15: 0000000000000001
[    4.469220] FS:  0000000000000000(0000) GS:ffff88817bac0000(0000) knlGS:0000000000000000
[    4.471554] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.472464] CR2: 0000000000000098 CR3: 0000000174e4e001 CR4: 0000000000760ee0
[    4.474264] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    4.476007] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    4.477061] PKRU: 55555554
[    4.477464] Call Trace:
[    4.478731]  blk_mq_init_allocated_queue+0x36a/0x3ad
[    4.479595]  blk_mq_init_queue+0x32/0x4e
[    4.480178]  nvme_validate_ns+0x98/0x623 [nvme_core]
[    4.480963]  ? nvme_submit_sync_cmd+0x1b/0x20 [nvme_core]
[    4.481685]  ? nvme_identify_ctrl.isra.8+0x70/0xa0 [nvme_core]
[    4.482601]  nvme_scan_work+0x23a/0x29b [nvme_core]
[    4.483269]  ? _raw_spin_unlock_irqrestore+0x25/0x38
[    4.483930]  ? try_to_wake_up+0x38d/0x3b3
[    4.484478]  ? process_one_work+0x179/0x2fc
[    4.485118]  process_one_work+0x1d3/0x2fc
[    4.485655]  ? rescuer_thread+0x2ae/0x2ae
[    4.486196]  worker_thread+0x1e9/0x2be
[    4.486841]  kthread+0x115/0x11d
[    4.487294]  ? kthread_park+0x76/0x76
[    4.487784]  ret_from_fork+0x3a/0x50
[    4.488322] Modules linked in: nvme nvme_core qemu_fw_cfg virtio_scsi ip_tables
[    4.489428] Dumping ftrace buffer:
[    4.489939]    (ftrace buffer empty)
[    4.490492] CR2: 0000000000000098
[    4.491052] ---[ end trace 03cd268ad5a86ff7 ]---

Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-nvme@lists.infradead.org
Cc: David Milburn <dmilburn@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 22:26:38 -07:00
Jens Axboe c616cbee97 blk-mq: punt failed direct issue to dispatch list
After the direct dispatch corruption fix, we permanently disallow direct
dispatch of non read/write requests. This works fine off the normal IO
path, as they will be retried like any other failed direct dispatch
request. But for the blk_insert_cloned_request() that only DM uses to
bypass the bottom level scheduler, we always first attempt direct
dispatch. For some types of requests, that's now a permanent failure,
and no amount of retrying will make that succeed. This results in a
livelock.

Instead of making special cases for what we can direct issue, and now
having to deal with DM solving the livelock while still retaining a BUSY
condition feedback loop, always just add a request that has been through
->queue_rq() to the hardware queue dispatch list. These are safe to use
as no merging can take place there. Additionally, if requests do have
prepped data from drivers, we aren't dependent on them not sharing space
in the request structure to safely add them to the IO scheduler lists.

This basically reverts ffe81d4532 and is based on a patch from Ming,
but with the list insert case covered as well.

Fixes: ffe81d4532 ("blk-mq: fix corruption with direct issue")
Cc: stable@vger.kernel.org
Suggested-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-07 08:16:11 -07:00
Jens Axboe ffe81d4532 blk-mq: fix corruption with direct issue
If we attempt a direct issue to a SCSI device, and it returns BUSY, then
we queue the request up normally. However, the SCSI layer may have
already setup SG tables etc for this particular command. If we later
merge with this request, then the old tables are no longer valid. Once
we issue the IO, we only read/write the original part of the request,
not the new state of it.

This causes data corruption, and is most often noticed with the file
system complaining about the just read data being invalid:

[  235.934465] EXT4-fs error (device sda1): ext4_iget:4831: inode #7142: comm dpkg-query: bad extra_isize 24937 (inode size 256)

because most of it is garbage...

This doesn't happen from the normal issue path, as we will simply defer
the request to the hardware queue dispatch list if we fail. Once it's on
the dispatch list, we never merge with it.

Fix this from the direct issue path by flagging the request as
REQ_NOMERGE so we don't change the size of it before issue.

See also:
  https://bugzilla.kernel.org/show_bug.cgi?id=201685

Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 6ce3dd6eec ("blk-mq: issue directly if hw queue isn't busy in case of 'none'")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04 20:06:48 -07:00
Christoph Hellwig 6544d229bf block: enable polling by default if a poll map is initalized
If the user did setup polling in the driver we should not require
another know in the block layer to enable it.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-12-04 11:38:19 -07:00