Commit Graph

3052 Commits

Author SHA1 Message Date
Linus Torvalds d19d5efd8c powerpc updates for 4.1
- Numerous minor fixes, cleanups etc.
 - More EEH work from Gavin to remove its dependency on device_nodes.
 - Memory hotplug implemented entirely in the kernel from Nathan Fontenot.
 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.
 - Rewrite of VPHN parsing logic & tests from Greg Kurz.
 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.
 - Support for pstore on powernv from Hari Bathini.
 - Removal of old powerpc specific byte swap routines by David Gibson.
 - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing
   your firmware when it wasn't.
 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.
 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek.
 - Some fixes for migration from Tyrel Datwyler.
 - A new syscall to switch the cpu endian by Michael Ellerman.
 - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn.
 - A fix for the OPAL sensor driver from Cédric Le Goater.
 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.
 - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per
   machine.
 - Small patch from Sam Bobroff to explicitly abort non-suspended transactions
   on syscalls, plus a test to exercise it.
 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.
 - Small patch to enable the hard lockup detector from Anton Blanchard.
 - Fix from Dave Olson for missing L2 cache information on some CPUs.
 - Some fixes from Michael Ellerman to get Cell machines booting again.
 - Freescale updates from Scott: Highlights include BMan device tree nodes, an
   MSI erratum workaround, a couple minor performance improvements, config
   updates, and misc fixes/cleanup.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVL2cxAAoJEFHr6jzI4aWAR8cP/19VTo/CzCE4ffPSx7qR464n
 F+WFZcbNjIMXu6+B0YLuJZEsuWtKKrCit/MCg3+mSgE4iqvxmtI+HDD0445Buszj
 UD4E4HMdPrXQ+KUSUDORvRjv/FFUXIa94LSv/0g2UeMsPz/HeZlhMxEu7AkXw9Nf
 rTxsmRTsOWME85Y/c9ss7XHuWKXT3DJV7fOoK9roSaN3dJAuWTtG3WaKS0nUu0ok
 0M81D6ZczoD6ybwh2DUMPD9K6SGxLdQ4OzQwtW6vWzcQIBDfy5Pdeo0iAFhGPvXf
 T4LLPkv4cF4AwHsAC4rKDPHQNa+oZBoLlScrHClaebAlDiv+XYKNdMogawUObvSh
 h7avKmQr0Ygp1OvvZAaXLhuDJI9FJJ8lf6AOIeULgHsDR9SyKMjZWxRzPe11uarO
 Fyi0qj3oJaQu6LjazZraApu8mo+JBtQuD3z3o5GhLxeFtBBF60JXj6zAXJikufnl
 kk1/BUF10nKUhtKcDX767AMUCtMH3fp5hx8K/z9T5v+pobJB26Wup1bbdT68pNBT
 NjdKUppV6QTjZvCsA6U2/ECu6E9KeIaFtFSL2IRRoiI0dWBN5/5eYn3RGkO2ZFoL
 1NdwKA2XJcchwTPkpSRrUG70sYH0uM2AldNYyaLfjzrQqza7Y6lF699ilxWmCN/H
 OplzJAE5cQ8Am078veTW
 =03Yh
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:

 - Numerous minor fixes, cleanups etc.

 - More EEH work from Gavin to remove its dependency on device_nodes.

 - Memory hotplug implemented entirely in the kernel from Nathan
   Fontenot.

 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.

 - Rewrite of VPHN parsing logic & tests from Greg Kurz.

 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.

 - Support for pstore on powernv from Hari Bathini.

 - Removal of old powerpc specific byte swap routines by David Gibson.

 - Fix from Vasant Hegde to prevent the flash driver telling you it was
   flashing your firmware when it wasn't.

 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.

 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
   Stancek.

 - Some fixes for migration from Tyrel Datwyler.

 - A new syscall to switch the cpu endian by Michael Ellerman.

 - Large series from Wei Yang to implement SRIOV, reviewed and acked by
   Bjorn.

 - A fix for the OPAL sensor driver from Cédric Le Goater.

 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.

 - Large series from Daniel Axtens to make our PCI hooks per PHB rather
   than per machine.

 - Small patch from Sam Bobroff to explicitly abort non-suspended
   transactions on syscalls, plus a test to exercise it.

 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.

 - Small patch to enable the hard lockup detector from Anton Blanchard.

 - Fix from Dave Olson for missing L2 cache information on some CPUs.

 - Some fixes from Michael Ellerman to get Cell machines booting again.

 - Freescale updates from Scott: Highlights include BMan device tree
   nodes, an MSI erratum workaround, a couple minor performance
   improvements, config updates, and misc fixes/cleanup.

* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
  powerpc/powermac: Fix build error seen with powermac smp builds
  powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
  powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
  powerpc/cell: Fix iommu breakage caused by controller_ops change
  powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
  powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
  powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
  powerpc/pseries: Correct memory hotplug locking
  powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
  powerpc: Add ppc64 hard lockup detector support
  oprofile: Disable oprofile NMI timer on ppc64
  powerpc/perf/hv-24x7: Add missing put_cpu_var()
  powerpc/perf/hv-24x7: Break up single_24x7_request
  powerpc/perf/hv-24x7: Define update_event_count()
  powerpc/perf/hv-24x7: Whitespace cleanup
  powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
  powerpc/perf/hv-24x7: Rename hv_24x7_event_update
  powerpc/perf/hv-24x7: Move debug prints to separate function
  powerpc/perf/hv-24x7: Drop event_24x7_request()
  powerpc/perf/hv-24x7: Use pr_devel() to log message
  ...

Conflicts:
	tools/testing/selftests/powerpc/Makefile
	tools/testing/selftests/powerpc/tm/Makefile
2015-04-16 13:53:32 -05:00
Linus Torvalds 2481bc7528 Power management and ACPI updates for v4.1-rc1
- Generic PM domains support update including new PM domain
    callbacks to handle device initialization better (Russell King,
    Rafael J Wysocki, Kevin Hilman).
 
  - Unified device properties API update including a new mechanism
    for accessing data provided by platform initialization code
    (Rafael J Wysocki, Adrian Hunter).
 
  - ARM cpuidle update including ARM32/ARM64 handling consolidation
    (Daniel Lezcano).
 
  - intel_idle update including support for the Silvermont Core in
    the Baytrail SOC and for the Airmont Core in the Cherrytrail and
    Braswell SOCs (Len Brown, Mathias Krause).
 
  - New cpufreq driver for Hisilicon ACPU (Leo Yan).
 
  - intel_pstate update including support for the Knights Landing
    chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi).
 
  - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann).
 
  - powernv cpufreq driver update (Shilpasri G Bhat).
 
  - devfreq update including Tegra support changes (Tomeu Vizoso,
    MyungJoo Ham, Chanwoo Choi).
 
  - powercap RAPL (Running-Average Power Limit) driver update
    including support for Intel Broadwell server chips (Jacob Pan,
    Mathias Krause).
 
  - ACPI device enumeration update related to the handling of the
    special PRP0001 device ID allowing DT-style 'compatible' property
    to be used for ACPI device identification (Rafael J Wysocki).
 
  - ACPI EC driver update including limited _DEP support (Lan Tianyu,
    Lv Zheng).
 
  - ACPI backlight driver update including a new mechanism to allow
    native backlight handling to be forced on non-Windows 8 systems
    and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede).
 
  - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu).
 
  - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
    Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki).
 
  - Fixes related to suspend-to-idle for the iTCO watchdog driver and
    the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu).
 
  - PM tracing support for the suspend phase of system suspend/resume
    transitions (Zhonghui Fu).
 
  - Configurable delay for the system suspend/resume testing facility
    (Brian Norris).
 
  - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJVLbO+AAoJEILEb/54YlRx5N4QAJXsmEW1FL2l6mMAyTQkEsVj
 nbqjF9I6aJgYM9+i8GKaZJxpN17SAZ7Ii7aCAXjPwX8AvjT70+gcZr+KDWtPir61
 B75VNVEcUYOR4vOF5Z6rQcQMlhGPkfMOJYXFMahpOG6DdPbVh1x2/tuawfc6IC0V
 a6S/fln6WqHrXQ+8swDSv1KuZsav6+8AQaTlNUQkkuXdY9b3k/3xiy5C2K26APP8
 x1B39iAF810qX6ipnK0gEOC3Vs29dl7hvNmgOVmmkBGVS7+pqTuy5n1/9M12cDRz
 78IQ7DXB0NcSwr5tdrmGVUyH0Q6H9lnD3vO7MJkYwKDh5a/2MiBr2GZc4KHDKDWn
 E1sS27f1Pdn9qnpWLzTcY+yYNV3EEyre56L2fc+sh+Xq9sNOjUah+Y/eAej/IxYD
 XYRf+GAj768yCJgNP+Y3PJES/PRh+0IZ/dn5k0Qq2iYvc8mcObyG6zdQIvCucv/i
 70uV1Z2GWEb31cI9TUV8o5GrMW3D0KI9EsCEEpiFFUnhjNog3AWcerGgFQMHxu7X
 ZnNSzudvek+XJ3NtpbPgTiJAmnMz8bDvBQm3G1LUO2TQdjYTU6YMUHsfzXs8DL6c
 aIMWO4stkVuDtWrlT/hfzIXepliccyXmSP6sbH+zNNCepulXe5C4M2SftaDi4l/B
 uIctXWznvHoGys+EFL+v
 =erd3
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes and cleanups all over, although there are a few
  items that sort of fall into the new feature category.

  First off, we have new callbacks for PM domains that should help us to
  handle some issues related to device initialization in a better way.

  There also is some consolidation in the unified device properties API
  area allowing us to use that inferface for accessing data coming from
  platform initialization code in addition to firmware-provided data.

  We have some new device/CPU IDs in a few drivers, support for new
  chips and a new cpufreq driver too.

  Specifics:

   - Generic PM domains support update including new PM domain callbacks
     to handle device initialization better (Russell King, Rafael J
     Wysocki, Kevin Hilman)

   - Unified device properties API update including a new mechanism for
     accessing data provided by platform initialization code (Rafael J
     Wysocki, Adrian Hunter)

   - ARM cpuidle update including ARM32/ARM64 handling consolidation
     (Daniel Lezcano)

   - intel_idle update including support for the Silvermont Core in the
     Baytrail SOC and for the Airmont Core in the Cherrytrail and
     Braswell SOCs (Len Brown, Mathias Krause)

   - New cpufreq driver for Hisilicon ACPU (Leo Yan)

   - intel_pstate update including support for the Knights Landing chip
     (Dasaratharaman Chandramouli, Kristen Carlson Accardi)

   - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann)

   - powernv cpufreq driver update (Shilpasri G Bhat)

   - devfreq update including Tegra support changes (Tomeu Vizoso,
     MyungJoo Ham, Chanwoo Choi)

   - powercap RAPL (Running-Average Power Limit) driver update including
     support for Intel Broadwell server chips (Jacob Pan, Mathias Krause)

   - ACPI device enumeration update related to the handling of the
     special PRP0001 device ID allowing DT-style 'compatible' property
     to be used for ACPI device identification (Rafael J Wysocki)

   - ACPI EC driver update including limited _DEP support (Lan Tianyu,
     Lv Zheng)

   - ACPI backlight driver update including a new mechanism to allow
     native backlight handling to be forced on non-Windows 8 systems and
     a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede)

   - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu)

   - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
     Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki)

   - Fixes related to suspend-to-idle for the iTCO watchdog driver and
     the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu)

   - PM tracing support for the suspend phase of system suspend/resume
     transitions (Zhonghui Fu)

   - Configurable delay for the system suspend/resume testing facility
     (Brian Norris)

   - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)"

* tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
  ACPI / scan: Rework modalias creation when "compatible" is present
  intel_idle: mark cpu id array as __initconst
  powercap / RAPL: mark rapl_ids array as __initconst
  powercap / RAPL: add ID for Broadwell server
  intel_pstate: Knights Landing support
  intel_pstate: remove MSR test
  cpufreq: fix qoriq uniprocessor build
  ACPI / scan: Take the PRP0001 position in the list of IDs into account
  ACPI / scan: Simplify acpi_match_device()
  ACPI / scan: Generalize of_compatible matching
  device property: Introduce firmware node type for platform data
  device property: Make it possible to use secondary firmware nodes
  PM / watchdog: iTCO: stop watchdog during system suspend
  cpufreq: hisilicon: add acpu driver
  ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler
  cpufreq: powernv: Report cpu frequency throttling
  intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
  intel_idle: Update support for Silvermont Core in Baytrail SOC
  PM / devfreq: tegra: Register governor on module init
  ...
2015-04-14 20:21:54 -07:00
Linus Torvalds a1480a166d Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - Hannes's patchset implements support for better error reporting
   introduced by the new ATA command spec.

 - the deperecated pci_ dma API usages have been replaced by dma_ ones.

 - a bunch of hardware specific updates and some cleanups.

* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: remove deprecated use of pci api
  ahci: st: st_configure_oob must be called after IP is clocked.
  ahci: st: Update the ahci_st DT documentation
  ahci: st: Update the DT example for how to obtain the PHY.
  sata_dwc_460ex: indent an if statement
  libata: Add tracepoints
  libata-eh: Set 'information' field for autosense
  libata: Implement support for sense data reporting
  libata: Implement NCQ autosense
  libata: use status bit definitions in ata_dump_status()
  ide,ata: Rename ATA_IDX to ATA_SENSE
  libata: whitespace fixes in ata_to_sense_error()
  libata: whitespace cleanup in ata_get_cmd_descript()
  libata: use READ_LOG_DMA_EXT
  libata: remove ATA_FLAG_LOWTAG
  sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
  sata_dwc_460ex: move to generic DMA driver
  sata_dwc_460ex: join messages back
  sata: xgene: add ACPI support for APM X-Gene SATA ports
  ata: sata_mv: add proper definitions for LP_PHY_CTL register values
2015-04-13 16:42:16 -07:00
Rafael J. Wysocki 17528b31c5 Merge branch 'pnp'
* pnp:
  PNP: Avoid leaving unregistered device objects in lists
  PNP: Convert pnp_lock into a mutex
  PNP: tty/serial/8250/8250_fintek: Use module_pnp_driver to register driver
  PNP: platform/x86/apple-gmux: Use module_pnp_driver to register driver
  PNP: net/sb1000: Use module_pnp_driver to register driver
  PNP: media/rc: Use module_pnp_driver to register driver
  PNP: ide/ide-pnp: Use module_pnp_driver to register driver
  PNP: ata/pata_isapnp: Use module_pnp_driver to register driver
  PNP: tpm/tpm_infineon: Use module_pnp_driver to register driver
  PNP: Add helper macro for pnp_register_driver boilerplate
  PNP / ACPI: Use ACPI_COMPANION_SET() during initialization
2015-04-13 00:36:15 +02:00
Quentin Lambert c54c719b55 ata: remove deprecated use of pci api
Replace occurences of the pci api by appropriate call to the dma api.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr)

@deprecated@
idexpression id;
position p;
@@

(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@bad1@
idexpression id;
position deprecated.p;
@@
...when != &id->dev
   when != pci_get_drvdata ( id )
   when != pci_enable_device ( id )
(
  pci_dma_supported@p ( id, ...)
|
  pci_alloc_consistent@p ( id, ...)
)

@depends on !bad1@
idexpression id;
expression direction;
position deprecated.p;
@@

(
- pci_dma_supported@p ( id,
+ dma_supported ( &id->dev,
...
+ , GFP_ATOMIC
  )
|
- pci_alloc_consistent@p ( id,
+ dma_alloc_coherent ( &id->dev,
...
+ , GFP_ATOMIC
  )
)

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-08 10:55:05 -04:00
Michael Ellerman b7f859dda9 Merge branch 'next-remove-ldst' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into next 2015-04-07 13:25:14 +10:00
Peter Griffin 9a1e75e11a ahci: st: st_configure_oob must be called after IP is clocked.
Currently the ahci_st driver will hang the system on probe, as the
st_configure_oob function does some register writes before the IP
is clocked. This patch moves the function call to after
ahci_platform_enable_resources (which enables the IP clock), and
resolves the hang.

Addtionally st_ahci_configure_oob should be called in the st_ahci_resume
function, so we also rectify that ensuring it is also called after
the IP clock has been enabled.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-01 12:07:19 -04:00
Dan Carpenter 8d5fe8d5ed sata_dwc_460ex: indent an if statement
We shuffled some code around in 8b3444852a ('sata_dwc_460ex: move to
generic DMA driver') an accidentally deleted a tab character here.  It
causes a Smatch warning "if statement not indented".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-30 13:14:40 -04:00
Martin K. Petersen 6fc4d97a49 libata: Blacklist queued TRIM on Samsung SSD 850 Pro
Blacklist queued TRIM on this drive for now.

Reported-by: Stefan Keller <linux-list@zahlenfresser.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
CC: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 15:22:46 -04:00
Martin K. Petersen ff7f53fb82 libata: Update Crucial/Micron blacklist
Micron has released an updated firmware (MU02) for M510/M550/MX100
drives to fix the issues with queued TRIM. Queued TRIM remains broken on
M500 but is working fine on later drives such as M600 and MX200.

Tweak our blacklist to reflect the above.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=71371
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 15:22:40 -04:00
Hannes Reinecke 255c03d15a libata: Add tracepoints
Add some tracepoints for ata_qc_issue, ata_qc_complete, and
ata_eh_link_autopsy.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Hannes Reinecke a1524f226a libata-eh: Set 'information' field for autosense
If NCQ autosense or the sense data reporting feature is enabled
the LBA of the offending command should be stored in the sense
data 'information' field.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Hannes Reinecke fe7173c206 libata: Implement support for sense data reporting
ACS-4 defines a sense data reporting feature set.
This patch implements support for it.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Hannes Reinecke 42b966fbf3 libata: Implement NCQ autosense
Some newer devices support NCQ autosense (cf ACS-4), so we should
be using it to retrieve the sense code and speed up recovery.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Hannes Reinecke 1308d7f010 libata: use status bit definitions in ata_dump_status()
Use the bit definitions for better readability.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Hannes Reinecke 27f00e53af ide,ata: Rename ATA_IDX to ATA_SENSE
ATA-8 defines bit 1 as 'ATA_SENSE', not 'ATA_IDX'.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Hannes Reinecke 8ae720449f libata: whitespace fixes in ata_to_sense_error()
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Hannes Reinecke 825e2d8783 libata: whitespace cleanup in ata_get_cmd_descript()
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:21 -04:00
Hannes Reinecke 9faa643855 libata: use READ_LOG_DMA_EXT
If READ_LOG_DMA_EXT is supported we should try to use it for
reading the log pages.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:21 -04:00
Tejun Heo 3a02824396 libata: remove ATA_FLAG_LOWTAG
sata_sil24 for some reason pukes when tags are allocated round-robin
which helps tag ordered controllers.  To work around the issue,
72dd299d50 ("libata: allow sata_sil24 to opt-out of tag ordered
submission") introduced ATA_FLAG_LOWTAG which tells libata tag
allocation to do lowest-first.

However, with the recent switch to blk-mq tag allocation, the liata
tag allocation code path is no longer used and the workaround is now
implemented in the block layer and selected by setting
scsi_host_template->tag_alloc_policy to BLK_TAG_ALLOC_FIFO.  See
9269e23496 ("libata: make sata_sil24 use fifo tag allocator").

This leaves ATA_FLAG_LOWTAG withoout any actual user.  Remove it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Dan Williams <dan.j.williams@intel.com>
2015-03-24 14:14:18 -04:00
Andy Shevchenko db7a657f3c sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
This patch re-uses hsdev->dev which is allocated on heap. Therefore, the
private structure, which is global variable, is reduced by one field.

In one case ap->dev is used and there it seems to be right decision.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-24 13:50:35 -04:00
Andy Shevchenko 8b3444852a sata_dwc_460ex: move to generic DMA driver
The SATA implementation based on two actually different devices, i.e. SATA and
DMA controllers.

For Synopsys DesignWare DMA we have already a generic implementation of the
driver. Thus, the patch converts the code to use DMAEngine framework and
dw_dmac driver.

In future it will be better to split the devices inside DTS as well like it's
done on other platforms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-24 13:50:35 -04:00
Andy Shevchenko d578514b27 sata_dwc_460ex: join messages back
It it better to have full message on one line. It simplifies to search for line
in the code by message when debugging.

Note that the lines which will be removed by sequential patch are not fixed
here.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-24 13:47:54 -04:00
David Gibson f571872671 powerpc: Move Power Macintosh drivers to generic byteswappers
ppc has special instruction forms to efficiently load and store values
in non-native endianness.  These can be accessed via the arch-specific
{ld,st}_le{16,32}() inlines in arch/powerpc/include/asm/swab.h.

However, gcc is perfectly capable of generating the byte-reversing
load/store instructions when using the normal, generic cpu_to_le*() and
le*_to_cpu() functions eaning the arch-specific functions don't have much
point.

Worse the "le" in the names of the arch specific functions is now
misleading, because they always generate byte-reversing forms, but some
ppc machines can now run a little-endian kernel.

To start getting rid of the arch-specific forms, this patch removes them
from all the old Power Macintosh drivers, replacing them with the
generic byteswappers.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-23 14:29:40 +11:00
Feng Kan 92b5bf9895 sata: xgene: add ACPI support for APM X-Gene SATA ports
This adds ACPI support for the APM X-Gene SATA ports. When the system
boots using ACPI table, the SATA ports are able to configure using the
values supplied by the ACPI table rather than the DTS.

Signed-off-by: Feng Kan <fkan@apm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-19 14:22:03 -04:00
Thomas Petazzoni 3661aa99d8 ata: sata_mv: add proper definitions for LP_PHY_CTL register values
Commit 9013d64e66 ("ata: sata_mv: fix disk hotplug for Armada
370/XP SoCs") added some manipulation of the LP_PHY_CTL register, but
using magic values. This commit changes the code to use proper
definitions for the LP_PHY_CTL register, which allows to document what
the different bits are doing.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-19 14:20:03 -04:00
Shaohua Li 5067c0469c ata: Add a new flag to destinguish sas controller
SAS controller has its own tag allocation, which doesn't directly match to ATA
tag, so SAS and SATA have different code path for ata tags. Originally we use
port->scsi_host (98bd4be1) to destinguish SAS controller, but libsas set
->scsi_host too, so we can't use it for the destinguish, we add a new flag for
this purpose.

Without this patch, the following oops can happen because scsi-mq uses
a host-wide tag map shared among all devices with some integer tag
values >= ATA_MAX_QUEUE.  These unexpectedly high tag values cause
__ata_qc_from_tag() to return NULL, which is then dereferenced in
ata_qc_new_init().

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
  IP: [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120
  PGD 32adf0067 PUD 32adf1067 PMD 0
  Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
  Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi igb
  i2c_algo_bit ptp pps_core pm80xx libsas scsi_transport_sas sg coretemp
  eeprom w83795 i2c_i801
  CPU: 4 PID: 1450 Comm: cydiskbench Not tainted 4.0.0-rc3 #1
  Hardware name: Supermicro X8DTH-i/6/iF/6F/X8DTH, BIOS 2.1b       05/04/12
  task: ffff8800ba86d500 ti: ffff88032a064000 task.ti: ffff88032a064000
  RIP: 0010:[<ffffffff804fd46e>]  [<ffffffff804fd46e>] ata_qc_new_init+0x3e/0x120
  RSP: 0018:ffff88032a067858  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff8800ba0d2230 RCX: 000000000000002a
  RDX: ffffffff80505ae0 RSI: 0000000000000020 RDI: ffff8800ba0d2230
  RBP: ffff88032a067868 R08: 0000000000000201 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ba0d0000
  R13: ffff8800ba0d2230 R14: ffffffff80505ae0 R15: ffff8800ba0d0000
  FS:  0000000041223950(0063) GS:ffff88033e480000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000058 CR3: 000000032a0a3000 CR4: 00000000000006e0
  Stack:
   ffff880329eee758 ffff880329eee758 ffff88032a0678a8 ffffffff80502dad
   ffff8800ba167978 ffff880329eee758 ffff88032bf9c520 ffff8800ba167978
   ffff88032bf9c520 ffff88032bf9a290 ffff88032a0678b8 ffffffff80506909
  Call Trace:
   [<ffffffff80502dad>] ata_scsi_translate+0x3d/0x1b0
   [<ffffffff80506909>] ata_sas_queuecmd+0x149/0x2a0
   [<ffffffffa0046650>] sas_queuecommand+0xa0/0x1f0 [libsas]
   [<ffffffff804ea544>] scsi_dispatch_cmd+0xd4/0x1a0
   [<ffffffff804eb50f>] scsi_queue_rq+0x66f/0x7f0
   [<ffffffff803e5098>] __blk_mq_run_hw_queue+0x208/0x3f0
   [<ffffffff803e54b8>] blk_mq_run_hw_queue+0x88/0xc0
   [<ffffffff803e5c74>] blk_mq_insert_request+0xc4/0x130
   [<ffffffff803e0b63>] blk_execute_rq_nowait+0x73/0x160
   [<ffffffffa0023fca>] sg_common_write+0x3da/0x720 [sg]
   [<ffffffffa0025100>] sg_new_write+0x250/0x360 [sg]
   [<ffffffffa0025feb>] sg_write+0x13b/0x450 [sg]
   [<ffffffff8032ec91>] vfs_write+0xd1/0x1b0
   [<ffffffff8032ee54>] SyS_write+0x54/0xc0
   [<ffffffff80689932>] system_call_fastpath+0x12/0x17

tj: updated description.

Fixes: 12cb5ce101 ("libata: use blk taging")
Reported-and-tested-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-19 14:14:43 -04:00
Peter Huewe 99c876bec3 PNP: ata/pata_isapnp: Use module_pnp_driver to register driver
Removing some boilerplate by using module_pnp_driver instead of calling
register and unregister in the otherwise empty init/exit functions

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18 22:39:17 +01:00
Kevin Hao d610f50361 sata_svw: remove the dependency on PPC_OF
The OF functionality has moved to a common place and be used by many
archs. So we don't need to include the ppc arch specific header files
and depend on PPC_OF option any more. This is a preparation for
killing PPC_OF.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-17 20:04:31 +11:00
Martin Hicks 29200f12a1 sata-fsl: Apply link speed limits
The driver was ignoring limits requested by libata.force.  The output
would look like:

fsl-sata ffe18000.sata: Sata FSL Platform/CSB Driver init
ata1: FORCE: PHY spd limit set to 1.5Gbps
ata1: SATA max UDMA/133 irq 74
ata1: Signature Update detected @ 0 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 310)

Signed-off-by: Martin Hicks <mort@bork.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-02 12:08:43 -05:00
Linus Torvalds 8494bcf5b7 Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-block
Pull block driver changes from Jens Axboe:
 "This contains:

   - The 4k/partition fixes for brd from Boaz/Matthew.

   - A few xen front/back block fixes from David Vrabel and Roger Pau
     Monne.

   - Floppy changes from Takashi, cleaning the device file creation.

   - Switching libata to use the new blk-mq tagging policy, removing
     code (and a suboptimal implementation) from libata.  This will
     throw you a merge conflict, since a bug in the original libata
     tagging code was fixed since this code was branched.  Trivial.
     From Shaohua.

   - Conversion of loop to blk-mq, from Ming Lei.

   - Cleanup of the io_schedule() handling in bsg from Peter Zijlstra.
     He claims it improves on unreadable code, which will cost him a
     beer.

   - Maintainer update or NDB, now handled by Markus Pargmann.

   - NVMe:
        - Optimization from me that avoids a kmalloc/kfree per IO for
          smaller (<= 8KB) IO. This cuts about 1% of high IOPS CPU
          overhead.
        - Removal of (now) dead RCU code, a relic from before NVMe was
          converted to blk-mq"

* 'for-3.20/drivers' of git://git.kernel.dk/linux-block:
  xen-blkback: default to X86_32 ABI on x86
  xen-blkfront: fix accounting of reqs when migrating
  xen-blkback,xen-blkfront: add myself as maintainer
  block: Simplify bsg complete all
  floppy: Avoid manual call of device_create_file()
  NVMe: avoid kmalloc/kfree for smaller IO
  MAINTAINERS: Update NBD maintainer
  libata: make sata_sil24 use fifo tag allocator
  libata: move sas ata tag allocation to libata-scsi.c
  libata: use blk taging
  NVMe: within nvme_free_queues(), delete RCU sychro/deferred free
  null_blk: suppress invalid partition info
  brd: Request from fdisk 4k alignment
  brd: Fix all partitions BUGs
  axonram: Fix bug in direct_access
  loop: add blk-mq.h include
  block: loop: don't handle REQ_FUA explicitly
  block: loop: introduce lo_discard() and lo_req_flush()
  block: loop: say goodby to bio
  block: loop: improve performance via blk-mq
2015-02-12 14:30:53 -08:00
Linus Torvalds 540a7c5061 SCSI misc on 20150209
This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas,
 megaraid_sas, ses) plus an assortment of minor updates.  There's also an
 update to ufs which adds new phy drivers and finally a new logging
 infrastructure for SCSI.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJU2Ty5AAoJEDeqqVYsXL0M9rAH/1xNpAxXuxQq+dW5Z+uOaX60
 5RRIu7/xA1HEfzkT5FTHrolmogDjVqawu4PZS66iHDeo05RBVUlbTA8qCK+MlRcN
 U6s0cLEw59eH3EaCfOGuYp/MnbhuV0eNxe0btmqJIQwuW3+gwZKGJdOq6LS2YasJ
 k/DyIBVmkJAVsN56vm9q2vbtcZp+Bg+ngqBS+SC4TF7vV1WCtFmS6yaUf62PYW3D
 +Irx37qHZntDR5wdw3dsuKDi5U8bl6myPjaVLnVJqg/WIF9RlCkjk5xpWT99AmVO
 NmtYQxLLBlAQ5K+sIlBUwxZe+8q1l+Aj4TTmJHAfFtyfp25s7JR9I6/QtOyC5Kw=
 =odol
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas,
  megaraid_sas, ses) plus an assortment of minor updates.

  There's also an update to ufs which adds new phy drivers and finally a
  new logging infrastructure for SCSI"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits)
  scsi_logging: return void for dev_printk() functions
  scsi: print single-character strings with seq_putc
  scsi: merge consecutive seq_puts calls
  scsi: replace seq_printf with seq_puts
  aha152x: replace seq_printf with seq_puts
  advansys: replace seq_printf with seq_puts
  scsi: remove SPRINTF macro
  sg: remove an unused variable
  hpsa: Use local workqueues instead of system workqueues
  hpsa: add in P840ar controller model name
  hpsa: add in gen9 controller model names
  hpsa: detect and report failures changing controller transport modes
  hpsa: shorten the wait for the CISS doorbell mode change ack
  hpsa: refactor duplicated scan completion code into a new routine
  hpsa: move SG descriptor set-up out of hpsa_scatter_gather()
  hpsa: do not use function pointers in fast path command submission
  hpsa: print CDBs instead of kernel virtual addresses for uncommon errors
  hpsa: do not use a void pointer for scsi_cmd field of struct CommandList
  hpsa: return failed from device reset/abort handlers
  hpsa: check for ctlr lockup after command allocation in main io path
  ...
2015-02-11 10:28:45 -08:00
Linus Torvalds 06cc01a0de sata_dwc_460ex: disable COMPILE_TEST again
Commit 84683a7e08 ("sata_dwc_460ex: enable COMPILE_TEST for the
driver") enabled this driver for non-ppc460-ex platforms, but it was
then disabled for ARM and ARM64 by commit 2de5a9c004 ("sata_dwc_460ex:
disable compilation on ARM and ARM64") because it's too noisy and
broken.

This disabled is entirely, because it's too noisy on x86-64 too, and
there's no point in disabling architectures one by one.  At a minimum,
the code isn't 64-bit clean, and even on 32-bit it is questionable
whether it makes sense.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10 18:24:57 -08:00
Tejun Heo b12aa1f25e Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata into for-3.20
09c32aaa36 ("ahci_xgene: Fix the dma state machine lockup for the
ATA_CMD_SMART PIO mode command.") missed 3.19 release.  Fold it into
for-3.20.

Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-09 07:54:41 -05:00
Suman Tripathi 09c32aaa36 ahci_xgene: Fix the dma state machine lockup for the ATA_CMD_SMART PIO mode command.
This patch addresses the issue with ATA_CMD_SMART pio mode command for
enumeration and device detection with ATA devices.  The X-Gene AHCI
controller has an errata in which it cannot clear the BSY bit after
the PIO setup FIS. The dma state machine enters CMFatalErrorUpdate
state and locks up. It is the same issue as in the commit 2a0bdff6b9
("ahci-xgene: fix the dma state machine lockup for the IDENTIFY DEVICE
PIO mode command").

For example :  without this patch it results in READ DMA command failure
as shown below :

 [  126.700072] ata2.00: exception Emask 0x0 SAct 0x0
		SErr 0x0 action 0x6 frozen
 [  126.707089] ata2.00: failed command: READ DMA
 [  126.711426] ata2.00: cmd c8/00:08:00:55:57/00:00:00:00:00/e1 tag 1
                dma 4096 in
 [  126.711426]  res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask
		0x4 (timeout)
 [  126.725956] ata2.00: status: { DRDY }

Signed-off-by: Suman Tripathi <stripathi@apm.com>
Reported-by:   Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03 11:16:47 -05:00
Guenter Roeck f627cfdeb7 ata: libahci: Use of_platform_device_create only if supported
of_platform_device_create does not exist if OF_ADDRESS is not configured,
so limit its use accordingly.

Without this fix, the sparc64:allmodconfig build fails with

ERROR: "of_platform_device_create" [drivers/ata/libahci_platform.ko] undefined!

Fixes: c7d7ddee7e ("ata: libahci: Allow using multiple regulators")
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03 07:12:54 -05:00
Markus Elfring fad0601643 sata_mv: Delete unnecessary checks before the function call "phy_power_off"
The phy_power_off() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03 07:05:04 -05:00
Markus Elfring 214f1aff3f ata: Delete unnecessary checks before the function call "pci_dev_put"
The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-02-03 07:04:44 -05:00
Akinobu Mita 1726390539 ata: pata_platform: fix owner module reference mismatch for scsi host
The owner module reference of the pata_of_platform's scsi_host is
initialized to pata_platform's one, because pata_of_platform driver
use a scsi_host_template defined in pata_platform.  So this drivers
can be unloaded even if the scsi device is being accessed.

This fixes it by propagating the scsi_host_template to pata_of_platform
driver.  The scsi_host_template is passed through a new
argument of __pata_platform_probe().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-ide@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
2015-01-28 18:45:23 -05:00
Akinobu Mita 018d5ef204 ata: ahci_platform: fix owner module reference mismatch for scsi host
The owner module reference of the ahci platform's scsi_host is
initialized to libahci_platform's one, because these drivers use a
scsi_host_template defined in libahci_platform.  So these drivers can
be unloaded even if the scsi device is being accessed.

This fixes it by pushing the scsi_host_template from libahci_platform
to all leaf drivers.  The scsi_host_template is passed through a new
argument of ahci_platform_init_host().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-ide@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
2015-01-28 18:45:23 -05:00
Tina Ruchandani cedda4c3b1 pata_pdc2027x: Use 64-bit timekeeping
Function pdc_detect_pll_input_clock uses 'struct timeval'
to measure start and end times, used to compute the pll_clock value.
'struct timeval' on 32-bit systems will have its tv_sec field
overflow in year 2038 and beyond. This patch uses 'ktime_t'
(which uses 64 bits for seconds) for start and end times instead.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-27 11:06:19 -05:00
Shaohua Li 9269e23496 libata: make sata_sil24 use fifo tag allocator
libata starts using block tag now, we can use BLK_TAG_ALLOC_FIFO to
solve the sata_sil24 tag bug.

https://bugzilla.kernel.org/show_bug.cgi?id=87101

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-26 09:44:04 -07:00
Shaohua Li 98bd4be1ba libata: move sas ata tag allocation to libata-scsi.c
Basically move the sas ata tag allocation to libata-scsi.c to make it clear
these staffs are just for sas.

Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-24 17:09:47 -07:00
Shaohua Li 12cb5ce101 libata: use blk taging
libata uses its own tag management which is duplication and the
implementation is poor. And if we switch to blk-mq, tag is build-in.
It's time to switch to generic taging.

The SAS driver has its own tag management, and looks we can't directly
map the host controler tag to SATA tag. So I just bypassed the SAS case.

I changed the code/variable name for the tag management of libata to
make it self contained. Only sas will use it. Later if libsas implements
its tag management, the tag management code in libata can be deleted
easily.

Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-23 14:19:04 -07:00
Thierry Reding 552941503b ata: libahci: Fix devres cleanup on failure
Commit c7d7ddee7e ("ata: libahci: Allow using multiple regulators")
releases regulators during ahci_platform_put_resources(). That doesn't
work because the function is run as part of the devres machinery. Such
resources are torn down in reverse order. Since the array that holds
pointers to the regulators is allocated using devres after the device
context to which ahci_platform_put_resources() is attached, the memory
will be freed before calling ahci_platform_put_resources() and thereby
causing a use-after-free error.

This commit fixes this by using regular allocations for the array. The
memory can then be freed after the regulators have been released. This
conserves the advantages of using the managed API.

Reported-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-21 11:21:38 -05:00
Hannes Reinecke a13b0c9d09 libata: fixup oops in ata_eh_link_report()
We should only try to evaluate the cdb if this is an ATAPI
device, for any other device the 'cdb' field and the cdb_len
has no meaning.

Fixes: cbba5b0ee4
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-20 19:41:41 +01:00
David Jeffery ce75145267 libata: prevent HSM state change race between ISR and PIO
It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to
HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE
and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().

This problem is hard to reproduce making this patch hard to verify, but this
fix will prevent the race.

I have not been able to reproduce the problem, but here is a crash dump from
a 2.6.32 kernel.

On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE:

crash> struct ata_port.hsm_task_state ffff881c1121c000
  hsm_task_state = 0

Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(),
which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value.

PID: 11053  TASK: ffff8816e846cae0  CPU: 0   COMMAND: "sshd"
 #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b
 #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92
 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510
 #3 [ffff88008ba03ac0] die at ffffffff81010e0b
 #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74
 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95
 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b
    [exception RIP: ata_sff_hsm_move+317]
    RIP: ffffffff813a77ad  RSP: ffff88008ba03ca0  RFLAGS: 00010097
    RAX: 0000000000000000  RBX: ffff881c1121dc60  RCX: 0000000000000000
    RDX: ffff881c1121dd10  RSI: ffff881c1121dc60  RDI: ffff881c1121c000
    RBP: ffff88008ba03d00   R8: 0000000000000000   R9: 000000000000002e
    R10: 000000000001003f  R11: 000000000000009b  R12: ffff881c1121c000
    R13: 0000000000000000  R14: 0000000000000050  R15: ffff881c1121dd78
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd
 #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e
 #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
--- <IRQ stack> ---
    [exception RIP: pipe_poll+48]
    RIP: ffffffff81192780  RSP: ffff880f26d459b8  RFLAGS: 00000246
    RAX: 0000000000000000  RBX: ffff880f26d459c8  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: 0000000000000000  RDI: ffff881a0539fa80
    RBP: ffffffff8100bb8e   R8: ffff8803b23324a0   R9: 0000000000000000
    R10: ffff880f26d45dd0  R11: 0000000000000008  R12: ffffffff8109b646
    R13: ffff880f26d45948  R14: 0000000000000246  R15: 0000000000000246
    ORIG_RAX: ffffffffffffff10  CS: 0010  SS: 0018
    RIP: 00007f26017435c3  RSP: 00007fffe020c420  RFLAGS: 00000206
    RAX: 0000000000000017  RBX: ffffffff8100b072  RCX: 00007fffe020c45c
    RDX: 00007f2604a3f120  RSI: 00007f2604a3f140  RDI: 000000000000000d
    RBP: 0000000000000000   R8: 00007fffe020e570   R9: 0101010101010101
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007fffe020e5f0
    R13: 00007fffe020e5f4  R14: 00007f26045f373c  R15: 00007fffe020e5e0
    ORIG_RAX: 0000000000000017  CS: 0033  SS: 002b

Somewhere between the ata_sff_hsm_move() check and the ata_sff_host_intr() check, the value changed.
On examining the other cpus to see what else was running, another cpu was running the error handler
routines:

PID: 326    TASK: ffff881c11014aa0  CPU: 1   COMMAND: "scsi_eh_1"
 #0 [ffff88008ba27e90] crash_nmi_callback at ffffffff8102fee6
 #1 [ffff88008ba27ea0] notifier_call_chain at ffffffff8152d515
 #2 [ffff88008ba27ee0] atomic_notifier_call_chain at ffffffff8152d57a
 #3 [ffff88008ba27ef0] notify_die at ffffffff810a154e
 #4 [ffff88008ba27f20] do_nmi at ffffffff8152b1db
 #5 [ffff88008ba27f50] nmi at ffffffff8152aaa0
    [exception RIP: _spin_lock_irqsave+47]
    RIP: ffffffff8152a1ff  RSP: ffff881c11a73aa0  RFLAGS: 00000006
    RAX: 0000000000000001  RBX: ffff881c1121deb8  RCX: 0000000000000000
    RDX: 0000000000000246  RSI: 0000000000000020  RDI: ffff881c122612d8
    RBP: ffff881c11a73aa0   R8: ffff881c17083800   R9: 0000000000000000
    R10: 0000000000000000  R11: 0000000000000000  R12: ffff881c1121c000
    R13: 000000000000001f  R14: ffff881c1121dd50  R15: ffff881c1121dc60
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
--- <NMI exception stack> ---
 #6 [ffff881c11a73aa0] _spin_lock_irqsave at ffffffff8152a1ff
 #7 [ffff881c11a73aa8] ata_exec_internal_sg at ffffffff81396fb5
 #8 [ffff881c11a73b58] ata_exec_internal at ffffffff81397109
 #9 [ffff881c11a73bd8] atapi_eh_request_sense at ffffffff813a34eb

Before it tried to acquire a spinlock, ata_exec_internal_sg() called ata_sff_flush_pio_task().
This function will set ap->hsm_task_state to HSM_ST_IDLE, and has no locking around setting this
value. ata_sff_flush_pio_task() can then race with the interrupt handler and potentially set
HSM_ST_IDLE at a fatal moment, which will trigger a kernel BUG.

v2: Fixup comment in ata_sff_flush_pio_task()

tj: Further updated comment.  Use ap->lock instead of shost lock and
    use the [un]lock_irq variant instead of the irqsave/restore one.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
2015-01-19 14:11:23 -05:00
Gregory CLEMENT c7d7ddee7e ata: libahci: Allow using multiple regulators
The current implementation of the libahci allows using multiple PHYs
but not multiple regulators. This patch adds the support of multiple
regulators. Until now it was mandatory to have a PHY under a subnode,
now a port subnode can contain either a regulator or a PHY (or both).

In order to be able to asociate a port with a regulator the port are
now a platform device in the device tree case.

There was only one driver which used directly the regulator field of
the ahci_host_priv structure. To preserve the bisectability the change
in the ahci_imx driver was done in the same patch.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-19 09:53:26 -05:00
Gregory CLEMENT 6033798121 ata: libahci: Clean-up the ahci_platform_en/disable_phys functions
The phy_ functions handle the NULL pointer case, so there is no need
to skip them if there is a NULL pointer. Moreover, after the error
label there is already no check on the pointer. This patch removes the
unnecessary tests and brings some consistency.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-19 09:53:25 -05:00
Dan Williams 72dd299d50 libata: allow sata_sil24 to opt-out of tag ordered submission
Ronny reports: https://bugzilla.kernel.org/show_bug.cgi?id=87101
    "Since commit 8a4aeec8d "libata/ahci: accommodate tag ordered
    controllers" the access to the harddisk on the first SATA-port is
    failing on its first access. The access to the harddisk on the
    second port is working normal.

    When reverting the above commit, access to both harddisks is working
    fine again."

Maintain tag ordered submission as the default, but allow sata_sil24 to
continue with the old behavior.

Cc: <stable@vger.kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Reported-by: Ronny Hegewald <Ronny.Hegewald@online.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-19 09:10:07 -05:00