Commit Graph

29 Commits

Author SHA1 Message Date
Francois Romieu 39bf4295bb de2104x: fix the TX watchdog
Insert de_init_rings() to reinit the rings before de_init_hw()
tries to access them again.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-03-09 23:09:43 +01:00
Francois Romieu 3f735b76a4 de2104x: prevent interrupt before the interrupt handler is registered
de_init_hw enables the irq thus it must be issued after request_irq.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-03-09 23:09:43 +01:00
Andrew Morton 99bb25793e [PATCH] uli526x warning fix
drivers/net/tulip/uli526x.c: In function `__check_mode':
drivers/net/tulip/uli526x.c:1693: warning: return from incompatible pointer type

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07 02:53:11 -05:00
Eric Sesterhenn / snakebyte c213460fd4 [PATCH] replace MODULE_PARM in tulip/uli526x.c
Replace the MODULE_PARM usage in uli526x.c with module_param.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-12 16:32:35 -05:00
Christoph Dworzak b9c4c60966 [PATCH] tulip: enable multiport NIC BIOS fixups for x86_64
A BIOS bug affecting some multiport tulip NICs requires an irq fixup
in tulip_core.c.  This has only been enabled for i686, but it is
needed for x86_64 as well.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:48:09 -05:00
Jesper Juhl b4558ea93d drivers/net: Remove pointless checks for NULL prior to calling kfree() 2005-10-28 16:53:13 -04:00
Ralf Baechle bc053d45cb [PATCH] de2104x: Resurrect Cobalt support for 2.6.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/tulip/de2104x.c |    5 +++++
 1 files changed, 5 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18 18:03:47 -04:00
Philippe De Muyter 32b5bfab9a [PATCH] tulip DC21143 rev 48 10Mbit HDX fix
The patch below is necessary to allow my Digital DS21143 Tulip rev 48
ethernet interface to work in a 10Mbit Half Duplex network.  Without
it, the driver keeps retrying other modes in an endless loop.  It seems
like someone already had the same problem with a rev 65 board :)

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03 22:16:42 -04:00
Keith Owens 3be034b68a [PATCH] Correct xircom_cb use of CONFIG_NET_POLL_CONTROLLER
xircom_cb.c does #if CONFIG_NET_POLL_CONTROLLER instead of #ifdef,
resulting in drivers/net/tulip/xircom_cb.c:120:5: warning:
"CONFIG_NET_POLL_CONTROLLER" is not defined.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 08:04:02 -04:00
Domen Puncer 0c5719c43d [PATCH] janitor: tulip/de4x5: list_for_each
s/for/list_for_each/

Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Domen Puncer <domen@coderock.org>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 10:06:33 -07:00
viro@ftp.linux.org.uk 6cafa99f01 [PATCH] (4/7) missing include (uli526x)
added missing include of dma-mapping.h, removed bogus ptrace.h (what the
hell was it doing there, in the first place?)

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-05 17:57:23 -04:00
Jeff Garzik afc7097f45 [netdrvr de2104x] store PCI bus addresses in unsigned long
BZ# 4475.
2005-08-31 06:11:16 -04:00
Jeff Garzik 1a44935840 [netdrvr tulip] new PCI ID
Noted in BZ# 2960.
2005-08-31 05:48:59 -04:00
Peer Chen 945a787675 [netdrvr uli526x] fix problems found in review
- s/DEVICE/net_device/
- improve formatting
- remove dead code
- check return value, in several areas
2005-08-20 01:10:06 -04:00
Peer Chen ea8f400c98 [netdrvr tulip] Remove ULi-specific code from generic tulip driver
It has a separate driver now, 'uli526x'.
2005-08-11 15:09:23 -04:00
Peer Chen 4689ced99b [netdrvr] add 'uli526x' driver (a tulip clone)
We want to extract our LAN card driver from tulip core driver and
make a new file uli526x.c at tulip folder, because we have added
some ethtool interface support and non-eprom support in our driver
and may be other change in the futher.

If our controllers support are still contained in the tulip core
driver, I think it'll increase the complexity of maintenance, you
know, tulip core driver include several files and support so many
other controllers.  Furthermore, I tested the newest kernel 2.6.12
and I found the tulip driver can not work on our lan controller, and
I no time to debug it, so I aspired want to make a single uli526x.c
file just for our controllers.  Could you help us remove the ULi
m5261/m5263 lan controller support from tulip core driver and add
the new single uli526x.c file for us?

Signed-off-by: Peer Chen <Peer.Chen@uli.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-29 15:33:58 -04:00
David S. Miller 689be43945 [NET]: Remove gratuitous use of skb->tail in network drivers.
Many drivers use skb->tail unnecessarily.

In these situations, the code roughly looks like:

	dev = dev_alloc_skb(...);

	[optional] skb_reserve(skb, ...);

	... skb->tail ...

But even if the skb_reserve() happens, skb->data equals
skb->tail.  So it doesn't make any sense to use anything
other than skb->data in these cases.

Another case was the s2io.c driver directly mucking with
the skb->data and skb->tail pointers.  It really just wanted
to do an skb_reserve(), so that's what the code was changed
to do instead.

Another reason I'm making this change as it allows some SKB
cleanups I have planned simpler to merge.  In those cleanups,
skb->head, skb->tail, and skb->end pointers are removed, and
replaced with skb->head_room and skb->tail_room integers.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 15:25:31 -07:00
Adam Belay 1fe2cb3276 [PATCH] fix tulip suspend/resume #2
This patch allows the tulip driver to suspend and resume properly.  It was
originally written by Karsten Keil and then modified by Adam Belay.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Adam Belay <abelay@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-27 00:46:40 -04:00
Hideki Yamane 9b25978ef8 [netdrvr] tulip: add pci id 2005-06-27 00:18:32 -04:00
Andrew Morton 16b110c3fd [PATCH] dmfe warning fix
drivers/net/tulip/dmfe.c: In function `dmfe_parse_srom':
drivers/net/tulip/dmfe.c:1805: warning: passing arg 1 of `__le16_to_cpup' from incompatible pointer type
drivers/net/tulip/dmfe.c:1817: warning: passing arg 1 of `__le32_to_cpup' from incompatible pointer type
drivers/net/tulip/dmfe.c:1817: warning: passing arg 1 of `__le32_to_cpup' from incompatible pointer type

This is basically a guess:

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-06-26 18:37:25 -04:00
Ralf Baechle 12755c16a9 Tulip fixes for Cobalt Qube/RaQ 2005-06-26 17:45:52 -04:00
Jeff Garzik 8b0ee07e10 Merge upstream (approx. 2.6.12-git8) into 'janitor' branch of netdev-2.6. 2005-06-26 17:11:03 -04:00
John W. Linville 9092f46b5a [PATCH] tulip: add return to ULI526X clause in tulip_mdio_write
The 'if' clause for ULI526X in tulip_mdio_write allows for
spin_unlock_irqrestore to be called twice for tp->mii_lock.  I believe
this is caused by the unintentional omission of a return at the end
of that clause.  This patch adds that return.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-05-24 00:26:12 -04:00
Jiri Benc c4cc26d331 [PATCH] Typo in tulip driver
This patch fixes a typo in tulip driver in 2.6.12-rc3.
2005-05-15 23:18:48 -04:00
Adrian Bunk f3f1546dbe [PATCH] drivers/net/tulip/dmfe.c: remove a check after use
This patch removes a NULL check that was useles because it happened
  after the first dereference of the variable.
  
  Signed-off-by: Adrian Bunk <bunk@stusta.de>
  Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-05-12 22:25:14 -04:00
Tobias Klauser 10a87fcf40 [PATCH] drivers/net/tulip/winbond-840: Use the DMA_32BIT_MASK constant
The previous patch did not compile cleanly on all architectures so
  here's a fixed one.
  
  Use the DMA_32BIT_MASK constant from dma-mapping.h when calling
  pci_set_dma_mask() or pci_set_consistent_dma_mask()
  
  Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
  Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-05-12 22:20:53 -04:00
Tobias Klauser cb199d42e1 [PATCH] drivers/net/tulip/dmfe: Use the DMA_32BIT_MASK constant
The previous patch did not compile cleanly on all architectures so
  here's a fixed one.
  
  Use the DMA_32BIT_MASK constant from dma-mapping.h when calling
  pci_set_dma_mask() or pci_set_consistent_dma_mask()
  
  Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
  Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-05-12 22:20:19 -04:00
Pavel Machek 05adc3b745 [PATCH] u32 vs. pm_message_t fixes for drivers/net
This fixes remaining u32s in drivers/ net.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:25 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00