Commit Graph

122 Commits

Author SHA1 Message Date
Sascha Hauer 8dfd0374be MMC core: limit minimum initialization frequency to 400kHz
Some controllers allow a much lower frequency than 400kHz.
Keep the minimum frequency within sensible limits.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-13 22:42:57 +02:00
Jorg Schummer 94d89efb2c mmc: mmc_rescan detects card change in one run
With this patch, mmc_rescan can detect the removal of an mmc card and
the insertion of (possibly another) card in the same run. This means
that a card change can be detected without having to call
mmc_detect_change multiple times.

This change generalises the core such that it can be easily used by
hosts which provide a mechanism to detect only the presence of a card
reader cover, which has to be taken off in order to insert a card. Other
hosts ("card detect" or "MMC_CAP_NEEDS_POLL") each receive an event when
a card is removed and when a card is inserted, so it is sufficient for
them if mmc_rescan handles only one event at a time. "Cover detect"
hosts, however, only receive events about the cover status. This means
that between 2 subsequent events, both a card removal and a card
insertion can occur. In this case, the pre-patch version of mmc_rescan
would only detect the removal of the previous card but not the insertion
of the new card.

Signed-off-by: Jorg Schummer <ext-jorg.2.schummer@nokia.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-06-13 22:42:56 +02:00
José M. Fernández 79bccc5aef mmc: increase power up delay
The TI controller on Toshiba Tecra M5 needs more time to power up or
the cards will init incorrectly or not at all.

Signed-off-by: José M. Fernández <josemariafg@gmail.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-05-03 22:11:31 +02:00
Wolfgang Muees 9d9f25c036 mmc_spi: do not check CID and CSD blocks with CRC16
Some cards are not able to calculate a valid CRC16 value
for CID and CSD reads (CRC for 512 byte data blocks is OK).
By moving the CRC enable after the read of CID and CSD, these
cards can be used. This patch was tested with a faulty 8 GByte
takeMS Class 6 SDHC card. This patch was suggested by
Pierre Ossman.

Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
2009-04-08 20:37:53 +02:00
Jarkko Lavinen 3e44ddd44e mmc: Accept EXT_CSD rev 1.3 since it is backwards compatible with 1.2
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-04-08 20:04:34 +02:00
Linus Torvalds 0a053e8c71 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (42 commits)
  atmel-mci: fix sdc_reg typo
  tmio_mmc: add maintainer
  mmc: Add OpenFirmware bindings for SDHCI driver
  sdhci: Add quirk for forcing maximum block size to 2048 bytes
  sdhci: Add quirk for controllers that need IRQ re-init after reset
  sdhci: Add quirk for controllers that need small delays for PIO
  sdhci: Add set_clock callback and a quirk for nonstandard clocks
  sdhci: Add get_{max,timeout}_clock callbacks
  sdhci: Add support for hosts reporting inverted write-protect state
  sdhci: Add support for card-detection polling
  sdhci: Enable only relevant (DMA/PIO) interrupts during transfers
  sdhci: Split card-detection IRQs management from sdhci_init()
  sdhci: Add support for bus-specific IO memory accessors
  mmc_spi: adjust for delayed data token response
  omap_hsmmc: Wait for SDBP
  omap_hsmmc: Fix MMC3 dma
  omap_hsmmc: Disable SDBP at suspend
  omap_hsmmc: Do not prefix slot name
  omap_hsmmc: Allow cover switch to cause rescan
  omap_hsmmc: Add 8-bit bus width mode support
  ...
2009-04-05 10:18:21 -07:00
David Brownell 5c13941acc MMC: regulator utilities
Glue between MMC and regulator stacks ... verified with
some OMAP3 boards using adjustable and configured-as-fixed
regulators on several MMC controllers.

These calls are intended to be used by MMC host adapters
using at least one regulator per host.  Examples include
slots with regulators supporting multiple voltages and
ones using multiple voltage rails (e.g. DAT4..DAT7 using a
separate supply, or a split rail chip like certain SDIO
WLAN or eMMC solutions).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31 09:56:26 +01:00
Wolfgang Muees c0c8887157 mmc_spi: allow higher timeouts for SPI mode
Some SD cards have very high timeouts in SPI mode.
So adjust the timeouts from theory to practice.

Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:02 +01:00
Balaji Rao d3096f88ac mmc: During unsafe resume, select the right volatge for the card
During mmc unsafe resume, choose the right voltage for the card after
powerup.

Although this has not seen to cause trouble, it's the wrong behaviour.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:01 +01:00
Pierre Ossman be6f19fc24 sdio: check that addresses are within the address space
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:00 +01:00
Pierre Ossman c8d718f103 sdio: handle null tuples
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:00 +01:00
Pierre Ossman 0d6132ba0b sdio: handle cis end marker in link field
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:30:00 +01:00
Adrian Hunter 736bb6bb01 mmc: Add Extended CSD register to debugfs
Extended CSD is a MMC card register.  As increasingly interesting
fields are being added to Extended CSD, it is helpful to see its
value.  Note that SD cards do not have an Extended CSD
register, so it is MMC only.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:59 +01:00
Andy Whitcroft 6b0b62853b mmc: add MODALIAS linkage for MMC/SD devices
Currently we are using an explicit udev rule to trigger loading of the
mmc-block module when an MMC or SD card is detected:

    SUBSYSTEM=="mmc", RUN+="/sbin/modprobe -Qba mmc-block"

It makes much more sense for the mmc bus driver and the mmc-block module to
share MODALIAS information so that they are linked automatically.

There is no real information of use in the MMC system at the current time.
All devices inserted require us to load the mmc-block device.  Until such
time as useful parameters exist simply reflect the module linkage via
the module alias below:

	mmc:block

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:58 +01:00
Jorg Schummer 7de427d088 mmc: delayed_work was never cancelled
The delayed work item mmc_host.detect is now cancelled before flushing
the work queue. This takes care of cases when delayed_work was scheduled
for mmc_host.detect, but not yet placed in the work queue.

Signed-off-by: Jorg Schummer <ext-jorg.2.schummer@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24 21:29:58 +01:00
Adrian Hunter cda56ac29f mmc: fix data timeout for SEND_EXT_CSD
Commit 0d3e0460f3
"MMC: CSD and CID timeout values" inadvertently broke
the timeout for the MMC command SEND_EXT_CSD.

This patch puts it back again.

Depending on the characteristics of the controller,
this bug may prevent the use of MMC cards.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-08 14:46:04 +01:00
David Brownell f6e10b865c mmc: warn about voltage mismatches
Get rid of a silent failure mode when the MMC/SD host doesn't
support the voltages needed to operate a given card, by
adding a warning.  A 3.3V host and a 3.0V card, for example,
no longer need to mysteriously just not work at all.

This isn't the best diagnostic; ideally it would also tell
what voltage the card and host support (and not just by
dumping the bitmasks).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-12-31 19:27:18 +01:00
Anton Vorontsov 86e8286a0e mmc: Add mmc_vddrange_to_ocrmask() helper function
This function sets the OCR mask bits according to provided voltage
ranges. Will be used by the mmc_spi OpenFirmware bindings.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-12-31 18:18:13 +01:00
Jarkko Lavinen b30f8af335 mmc: Add 8-bit bus width support
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-12-31 18:18:12 +01:00
Kay Sievers d1b2686308 mmc: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-11-08 21:37:46 +01:00
Pierre Ossman 493890e75d mmc: increase SD write timeout for crappy cards
It seems that some cards are slightly out of spec and occasionally
will not be able to complete a write in the alloted 250 ms [1].
Incease the timeout slightly to allow even these cards to function
properly.

[1] http://lkml.org/lkml/2008/9/23/390

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-11-08 21:36:59 +01:00
Matthew Fleming 0d3e0460f3 MMC: CSD and CID timeout values
The MMC spec states that the timeout for accessing the CSD and CID
registers is 64 clock cycles.

Signed-off-by: Matthew Fleming <matthew.fleming@imgtec.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12 11:04:37 +02:00
Pierre Ossman d16f577004 sdio: high-speed support
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12 11:04:34 +02:00
Pierre Ossman 6501ff604a sdio: give sdio irq thread a host specific name
There is one thread per host controller so make sure they all get
unique names.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12 11:04:30 +02:00
Pierre Ossman e633b7bcec sdio: make sleep on error interruptable
Make sure we can be woken from the forced sleep that is done on errors.
Removing a card often results in -ENOMEDIUM or -EILSEQ so we previously
locked up the removal process for a second.

We could completely exit on -ENOMEDIUM, but it might be a transient
glitch so treat it like any other error.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12 11:04:28 +02:00
Pierre Ossman a84756c573 mmc: properly iterate over sg list in debug check
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01 19:03:37 +02:00
Haavard Skinnemoen f4b7f927b5 mmc: Add per-card debugfs support
For each card successfully added to the bus, create a subdirectory under
the host's debugfs root with information about the card.

At the moment, only a single file is added to the card directory for
all cards: "state". It reflects the "state" field in struct mmc_card,
indicating whether the card is present, readonly, etc.

For MMC and SD cards (not SDIO), another file is added: "status".
Reading this file will ask the card about its current status and
return it. This can be useful if the card just refuses to respond to
any commands, which might indicate that the card state is not what the
MMC core thinks it is (due to a missing stop command, for example.)

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27 01:26:17 +02:00
Haavard Skinnemoen 6edd8ee60a mmc: Export internal host state through debugfs
When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug
containing information about an mmc host's internal state. Currently,
just a single file is created, "ios", which contains information about
the current operating parameters for the bus (clock speed, bus width,
etc.)

Host drivers can add additional files and directories under the host's
root directory by passing the debugfs_root field in struct mmc_host as
the 'parent' parameter to debugfs_create_*.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27 01:26:16 +02:00
Linus Torvalds 8a0ca91e1d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits)
  sdio_uart: Fix SDIO break control to now return success or an error
  mmc: host driver for Ricoh Bay1Controllers
  sdio: sdio_io.c Fix sparse warnings
  sdio: fix the use of hard coded timeout value.
  mmc: OLPC: update vdd/powerup quirk comment
  mmc: fix spares errors of sdhci.c
  mmc: remove multiwrite capability
  wbsd: fix bad dma_addr_t conversion
  atmel-mci: Driver for Atmel on-chip MMC controllers
  mmc: fix sdio_io sparse errors
  mmc: wbsd.c fix shadowing of 'dma' variable
  MMC: S3C24XX: Refuse incorrectly aligned transfers
  MMC: S3C24XX: Add maintainer entry
  MMC: S3C24XX: Update error debugging.
  MMC: S3C24XX: Add media presence test to request handling.
  MMC: S3C24XX: Fix use of msecs where jiffies are needed
  MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices
  MMC: S3C24XX: Fix s3c2410_dma_request() return code check.
  MMC: S3C24XX: Allow card-detect on non-IRQ capable pin
  MMC: S3C24XX: Ensure host->mrq->data is valid
  ...

Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c
and include/linux/mmc/sdio_func.h when merging.
2008-07-16 15:17:52 -07:00
Tomas Winkler ea901300cd sdio: sdio_io.c Fix sparse warnings
Unfold nested macros it creates not readable code and
sparse warnings
sdio_io.c:190:9: warning: symbol '_min1' shadows an earlier one

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 15:47:03 +02:00
Benzi Zbit 62a7573ee9 sdio: fix the use of hard coded timeout value.
This adds reading and using of enable_timeout from the CIS

Signed-off-by: Benzi Zbit <benzi.zbit@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 15:47:03 +02:00
Tomas Winkler 6d37333163 mmc: fix sdio_io sparse errors
This patch fixes sdio_io sparse errors.
This fix changes signature of API functions,
changing
unsigned char -> u8
unsigned short -> u16
unsigned long -> u32 - this was probably a bug in 64 bit platforms

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:48 +02:00
Pierre Ossman eea0f581c4 sdio: clean up handling of byte mode transfer size
Make sure that the maximum size for a byte mode transfer is identical
in all places. Also tweak the transfer helper so that a single byte
mode transfer is preferred over (possibly multiple) block mode
request(s).

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:44 +02:00
Pierre Ossman ad3868b2ec mmc,sdio: helper function for transfer padding
There are a lot of crappy controllers out there that cannot handle
all the request sizes that the MMC/SD/SDIO specifications require.
In case the card driver can pad the data to overcome the problems,
this commit adds a helper that calculates how much that padding
should be.

A corresponding helper is also added for SDIO, but it can also deal
with all the complexities of splitting up a large transfer efficiently.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:44 +02:00
Deepak Saxena 8769392b19 MMC: Trivial comment cleanup
Make the variable name in the comments match the actual name
of the variable.

Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:41 +02:00
Anton Vorontsov 08f80bb519 mmc: change .get_ro() callback semantics
Now get_ro() callback must return 0/1 values for its logical states, and
negative errno values in case of error. If particular host instance doesn't
support RO/WP switch, it should return -ENOSYS.

This patch changes some hosts in two ways:

1. Now functions should be smart to not return negative values in
   "RO asserted" case (particularly gpio_ calls could return negative
   values for the outermost GPIOs).

   Also, board code usually passes get_ro() callbacks that directly return
   gpioreg & bit result, so at91_mci, imxmmc, pxamci and mmc_spi's get_ro()
   handlers need take special care when returning platform's values to the
   mmc core.

2. In case of host instance didn't implement get_ro() callback, it should
   really return -ENOSYS and let the mmc core decide what to do about it
   (mmc core thinks the same way as the hosts, so it isn't functional
   change).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:41 +02:00
Anton Vorontsov 28f52482b4 mmc: add support for card-detection polling
Some hosts (and boards that use mmc_spi) do not use interrupts on the CD
line, so they can't trigger mmc_detect_change. We want to poll the card
and see if there was a change. 1 second poll interval seems resonable.

This patch also implements .get_cd() host operation, that could be used
by the hosts that are able to report card-detect status without need to
talk MMC.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:41 +02:00
Adrian Bunk e70aa3fac1 mmc: sdio_ops.c should #include "sdio_ops.h"
Every file should include the headers containing the externs for its
global functions.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:33 +02:00
Adrian Bunk 98b843be56 mmc: proper prototypes for mmc_attach_*()
This patch adds proper prototypes for mmc_attach_*() in
drivers/mmc/core/core.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:32 +02:00
Adrian Bunk 261172fd1b mmc: make __mmc_release_bus() static
This patch makes the needlessly global __mmc_release_bus() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:32 +02:00
Robert P. J. Day 6fee65cfde mmc: use shorter, equivalent set_current_state()
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:27 +02:00
Pierre Ossman ff3112f5ad mmc: set controller name early
Reorganise code so that mmc_hostname() works directly after allocation.
That way host drivers can use that name for resource allocations and
messages during probing.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-04-18 20:05:26 +02:00
Pierre Ossman 51ec92e295 mmc: use sysfs groups to handle conditional attributes
Suppressing uevents turned out to be a bad idea as it screws up the
order of events, making user space very confused. Change the system to
use sysfs groups instead.

This is a regression that, for some odd reason, has gone unnoticed for
some time. It confuses hal so that the block devices (which have the
mmc device as a parent) are not registered. End result being that
desktop magic when cards are inserted won't work.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 17:02:20 -07:00
Adrian Bunk 87ae9afdca cleanup asm/scatterlist.h includes
Not architecture specific code should not #include <asm/scatterlist.h>.

This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02 08:47:06 +01:00
Pierre Ossman 1fa8dd146f mmc: use common byte swap macros
Use the more generic byte swapping macros instead of the socket variants.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-27 14:41:04 +02:00
Pierre Ossman 78e480731a mmc: fix cid and csd byte order
MMC over SPI sends the CID and CSD registers as data, not responses,
which means that the host driver won't do the necessary byte flipping
for us.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-27 14:14:23 +02:00
Florin Malita 00cedfa67b mmc: possible leak in mmc_read_ext_csd
The exception path associated with an invalid ext_csd_struct returns
without freeing ext_csd.

Coverity CID 1909.

Signed-off-by: Florin Malita
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-17 21:33:46 +02:00
Al Viro 7ac0326c3f uevent environment changes fallout
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 08:53:33 -07:00
Linus Torvalds efefc6eb38 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits)
  PM: merge device power-management source files
  sysfs: add copyrights
  kobject: update the copyrights
  kset: add some kerneldoc to help describe what these strange things are
  Driver core: rename ktype_edd and ktype_efivar
  Driver core: rename ktype_driver
  Driver core: rename ktype_device
  Driver core: rename ktype_class
  driver core: remove subsystem_init()
  sysfs: move sysfs file poll implementation to sysfs_open_dirent
  sysfs: implement sysfs_open_dirent
  sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir
  sysfs: make sysfs_root a regular directory dirent
  sysfs: open code sysfs_attach_dentry()
  sysfs: make s_elem an anonymous union
  sysfs: make bin attr open get active reference of parent too
  sysfs: kill unnecessary NULL pointer check in sysfs_release()
  sysfs: kill unnecessary sysfs_get() in open paths
  sysfs: reposition sysfs_dirent->s_mode.
  sysfs: kill sysfs_update_file()
  ...
2007-10-12 15:49:37 -07:00
Kay Sievers 7eff2e7a8b Driver core: change add_uevent_var to use a struct
This changes the uevent buffer functions to use a struct instead of a
long list of parameters. It does no longer require the caller to do the
proper buffer termination and size accounting, which is currently wrong
in some places. It fixes a known bug where parts of the uevent
environment are overwritten because of wrong index calculations.

Many thanks to Mathieu Desnoyers for finding bugs and improving the
error handling.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:01 -07:00