Commit Graph

397 Commits

Author SHA1 Message Date
Linus Torvalds 7a1e8b80fb Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "Highlights:

   - TPM core and driver updates/fixes
   - IPv6 security labeling (CALIPSO)
   - Lots of Apparmor fixes
   - Seccomp: remove 2-phase API, close hole where ptrace can change
     syscall #"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (156 commits)
  apparmor: fix SECURITY_APPARMOR_HASH_DEFAULT parameter handling
  tpm: Add TPM 2.0 support to the Nuvoton i2c driver (NPCT6xx family)
  tpm: Factor out common startup code
  tpm: use devm_add_action_or_reset
  tpm2_i2c_nuvoton: add irq validity check
  tpm: read burstcount from TPM_STS in one 32-bit transaction
  tpm: fix byte-order for the value read by tpm2_get_tpm_pt
  tpm_tis_core: convert max timeouts from msec to jiffies
  apparmor: fix arg_size computation for when setprocattr is null terminated
  apparmor: fix oops, validate buffer size in apparmor_setprocattr()
  apparmor: do not expose kernel stack
  apparmor: fix module parameters can be changed after policy is locked
  apparmor: fix oops in profile_unpack() when policy_db is not present
  apparmor: don't check for vmalloc_addr if kvzalloc() failed
  apparmor: add missing id bounds check on dfa verification
  apparmor: allow SYS_CAP_RESOURCE to be sufficient to prlimit another task
  apparmor: use list_next_entry instead of list_entry_next
  apparmor: fix refcount race when finding a child profile
  apparmor: fix ref count leak when profile sha1 hash is read
  apparmor: check that xindex is in trans_table bounds
  ...
2016-07-29 17:38:46 -07:00
Seth Forshee 0b3c9761d1 evm: Translate user/group ids relative to s_user_ns when computing HMAC
The EVM HMAC should be calculated using the on disk user and
group ids, so the k[ug]ids in the inode must be translated
relative to the s_user_ns of the inode's super block.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-07-05 15:13:10 -05:00
Eric Richter 544e1cea03 ima: extend the measurement entry specific pcr
Extend the PCR supplied as a parameter, instead of assuming that the
measurement entry uses the default configured PCR.

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:22 -04:00
Eric Richter a422638d49 ima: change integrity cache to store measured pcr
IMA avoids re-measuring files by storing the current state as a flag in
the integrity cache. It will then skip adding a new measurement log entry
if the cache reports the file as already measured.

If a policy measures an already measured file to a new PCR, the measurement
will not be added to the list. This patch implements a new bitfield for
specifying which PCR the file was measured into, rather than if it was
measured.

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:22 -04:00
Eric Richter 67696f6d79 ima: redefine duplicate template entries
Template entry duplicates are prevented from being added to the
measurement list by checking a hash table that contains the template
entry digests. However, the PCR value is not included in this comparison,
so duplicate template entry digests with differing PCRs may be dropped.

This patch redefines duplicate template entries as template entries with
the same digest and same PCR values.

Reported-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:21 -04:00
Eric Richter 5f6f027b50 ima: change ima_measurements_show() to display the entry specific pcr
IMA assumes that the same default Kconfig PCR is extended for each
entry. This patch replaces the default configured PCR with the policy
defined PCR.

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:21 -04:00
Eric Richter 14b1da85bb ima: include pcr for each measurement log entry
The IMA measurement list entries include the Kconfig defined PCR value.
This patch defines a new ima_template_entry field for including the PCR
as specified in the policy rule.

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:21 -04:00
Eric Richter 725de7fabb ima: extend ima_get_action() to return the policy pcr
Different policy rules may extend different PCRs. This patch retrieves
the specific PCR for the matched rule.  Subsequent patches will include
the rule specific PCR in the measurement list and extend the appropriate
PCR.

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:20 -04:00
Eric Richter 0260643ce8 ima: add policy support for extending different pcrs
This patch defines a new IMA measurement policy rule option "pcr=",
which allows extending different PCRs on a per rule basis. For example,
the system independent files could extend the default IMA Kconfig
specified PCR, while the system dependent files could extend a different
PCR.

The following is an example of this usage with an SELinux policy; the
rule would extend PCR 11 with system configuration files:

  measure func=FILE_CHECK mask=MAY_READ obj_type=system_conf_t pcr=11

Changelog v3:
- FIELD_SIZEOF returns bytes, not bits. Fixed INVALID_PCR

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:20 -04:00
Eric Richter 96d450bbec integrity: add measured_pcrs field to integrity cache
To keep track of which measurements have been extended to which PCRs, this
patch defines a new integrity_iint_cache field named measured_pcrs. This
field is a bitmask of the PCRs measured. Each bit corresponds to a PCR
index. For example, bit 10 corresponds to PCR 10.

Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-06-30 01:14:19 -04:00
Andy Shevchenko b8b572789c security/integrity/ima/ima_policy.c: use %pU to output UUID in printable format
Instead of open coded variant re-use extension that vsprintf.c provides
us for ages.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Linus Torvalds f4f27d0028 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "Highlights:

   - A new LSM, "LoadPin", from Kees Cook is added, which allows forcing
     of modules and firmware to be loaded from a specific device (this
     is from ChromeOS, where the device as a whole is verified
     cryptographically via dm-verity).

     This is disabled by default but can be configured to be enabled by
     default (don't do this if you don't know what you're doing).

   - Keys: allow authentication data to be stored in an asymmetric key.
     Lots of general fixes and updates.

   - SELinux: add restrictions for loading of kernel modules via
     finit_module().  Distinguish non-init user namespace capability
     checks.  Apply execstack check on thread stacks"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits)
  LSM: LoadPin: provide enablement CONFIG
  Yama: use atomic allocations when reporting
  seccomp: Fix comment typo
  ima: add support for creating files using the mknodat syscall
  ima: fix ima_inode_post_setattr
  vfs: forbid write access when reading a file into memory
  fs: fix over-zealous use of "const"
  selinux: apply execstack check on thread stacks
  selinux: distinguish non-init user namespace capability checks
  LSM: LoadPin for kernel file loading restrictions
  fs: define a string representation of the kernel_read_file_id enumeration
  Yama: consolidate error reporting
  string_helpers: add kstrdup_quotable_file
  string_helpers: add kstrdup_quotable_cmdline
  string_helpers: add kstrdup_quotable
  selinux: check ss_initialized before revalidating an inode label
  selinux: delay inode label lookup as long as possible
  selinux: don't revalidate an inode's label when explicitly setting it
  selinux: Change bool variable name to index.
  KEYS: Add KEYCTL_DH_COMPUTE command
  ...
2016-05-19 09:21:36 -07:00
Linus Torvalds c52b76185b Merge branch 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct path' constification update from Al Viro:
 "'struct path' is passed by reference to a bunch of Linux security
  methods; in theory, there's nothing to stop them from modifying the
  damn thing and LSM community being what it is, sooner or later some
  enterprising soul is going to decide that it's a good idea.

  Let's remove the temptation and constify all of those..."

* 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify ima_d_path()
  constify security_sb_pivotroot()
  constify security_path_chroot()
  constify security_path_{link,rename}
  apparmor: remove useless checks for NULL ->mnt
  constify security_path_{mkdir,mknod,symlink}
  constify security_path_{unlink,rmdir}
  apparmor: constify common_perm_...()
  apparmor: constify aa_path_link()
  apparmor: new helper - common_path_perm()
  constify chmod_common/security_path_chmod
  constify security_sb_mount()
  constify chown_common/security_path_chown
  tomoyo: constify assorted struct path *
  apparmor_path_truncate(): path->mnt is never NULL
  constify vfs_truncate()
  constify security_path_truncate()
  [apparmor] constify struct path * in a bunch of helpers
2016-05-17 14:41:03 -07:00
Al Viro 0e0162bb8c Merge branch 'ovl-fixes' into for-linus
Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.
2016-05-17 02:17:59 -04:00
James Morris 0250abcd72 Merge tag 'keys-next-20160505' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next 2016-05-06 09:29:00 +10:00
David Howells d55201ce08 Merge branch 'keys-trust' into keys-next
Here's a set of patches that changes how certificates/keys are determined
to be trusted.  That's currently a two-step process:

 (1) Up until recently, when an X.509 certificate was parsed - no matter
     the source - it was judged against the keys in .system_keyring,
     assuming those keys to be trusted if they have KEY_FLAG_TRUSTED set
     upon them.

     This has just been changed such that any key in the .ima_mok keyring,
     if configured, may also be used to judge the trustworthiness of a new
     certificate, whether or not the .ima_mok keyring is meant to be
     consulted for whatever process is being undertaken.

     If a certificate is determined to be trustworthy, KEY_FLAG_TRUSTED
     will be set upon a key it is loaded into (if it is loaded into one),
     no matter what the key is going to be loaded for.

 (2) If an X.509 certificate is loaded into a key, then that key - if
     KEY_FLAG_TRUSTED gets set upon it - can be linked into any keyring
     with KEY_FLAG_TRUSTED_ONLY set upon it.  This was meant to be the
     system keyring only, but has been extended to various IMA keyrings.
     A user can at will link any key marked KEY_FLAG_TRUSTED into any
     keyring marked KEY_FLAG_TRUSTED_ONLY if the relevant permissions masks
     permit it.

These patches change that:

 (1) Trust becomes a matter of consulting the ring of trusted keys supplied
     when the trust is evaluated only.

 (2) Every keyring can be supplied with its own manager function to
     restrict what may be added to that keyring.  This is called whenever a
     key is to be linked into the keyring to guard against a key being
     created in one keyring and then linked across.

     This function is supplied with the keyring and the key type and
     payload[*] of the key being linked in for use in its evaluation.  It
     is permitted to use other data also, such as the contents of other
     keyrings such as the system keyrings.

     [*] The type and payload are supplied instead of a key because as an
         optimisation this function may be called whilst creating a key and
         so may reject the proposed key between preparse and allocation.

 (3) A default manager function is provided that permits keys to be
     restricted to only asymmetric keys that are vouched for by the
     contents of the system keyring.

     A second manager function is provided that just rejects with EPERM.

 (4) A key allocation flag, KEY_ALLOC_BYPASS_RESTRICTION, is made available
     so that the kernel can initialise keyrings with keys that form the
     root of the trust relationship.

 (5) KEY_FLAG_TRUSTED and KEY_FLAG_TRUSTED_ONLY are removed, along with
     key_preparsed_payload::trusted.

This change also makes it possible in future for userspace to create a private
set of trusted keys and then to have it sealed by setting a manager function
where the private set is wholly independent of the kernel's trust
relationships.

Further changes in the set involve extracting certain IMA special keyrings
and making them generally global:

 (*) .system_keyring is renamed to .builtin_trusted_keys and remains read
     only.  It carries only keys built in to the kernel.  It may be where
     UEFI keys should be loaded - though that could better be the new
     secondary keyring (see below) or a separate UEFI keyring.

 (*) An optional secondary system keyring (called .secondary_trusted_keys)
     is added to replace the IMA MOK keyring.

     (*) Keys can be added to the secondary keyring by root if the keys can
         be vouched for by either ring of system keys.

 (*) Module signing and kexec only use .builtin_trusted_keys and do not use
     the new secondary keyring.

 (*) Config option SYSTEM_TRUSTED_KEYS now depends on ASYMMETRIC_KEY_TYPE as
     that's the only type currently permitted on the system keyrings.

 (*) A new config option, IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY,
     is provided to allow keys to be added to IMA keyrings, subject to the
     restriction that such keys are validly signed by a key already in the
     system keyrings.

     If this option is enabled, but secondary keyrings aren't, additions to
     the IMA keyrings will be restricted to signatures verifiable by keys in
     the builtin system keyring only.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-05-04 17:20:20 +01:00
Mimi Zohar cf90ea9340 ima: fix the string representation of the LSM/IMA hook enumeration ordering
This patch fixes the string representation of the LSM/IMA hook enumeration
ordering used for displaying the IMA policy.

Fixes: d9ddf077bb ("ima: support for kexec image and initramfs")
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-05-04 18:46:00 +10:00
Mimi Zohar 05d1a717ec ima: add support for creating files using the mknodat syscall
Commit 3034a14 "ima: pass 'opened' flag to identify newly created files"
stopped identifying empty files as new files.  However new empty files
can be created using the mknodat syscall.  On systems with IMA-appraisal
enabled, these empty files are not labeled with security.ima extended
attributes properly, preventing them from subsequently being opened in
order to write the file data contents.  This patch defines a new hook
named ima_post_path_mknod() to mark these empty files, created using
mknodat, as new in order to allow the file data contents to be written.

In addition, files with security.ima xattrs containing a file signature
are considered "immutable" and can not be modified.  The file contents
need to be written, before signing the file.  This patch relaxes this
requirement for new files, allowing the file signature to be written
before the file contents.

Changelog:
- defer identifying files with signatures stored as security.ima
  (based on Dmitry Rozhkov's comments)
- removing tests (eg. dentry, dentry->d_inode, inode->i_size == 0)
  (based on Al's review)

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Al Viro <<viro@zeniv.linux.org.uk>
Tested-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
2016-05-01 09:23:52 -04:00
Mimi Zohar 42a4c60319 ima: fix ima_inode_post_setattr
Changing file metadata (eg. uid, guid) could result in having to
re-appraise a file's integrity, but does not change the "new file"
status nor the security.ima xattr.  The IMA_PERMIT_DIRECTIO and
IMA_DIGSIG_REQUIRED flags are policy rule specific.  This patch
only resets these flags, not the IMA_NEW_FILE or IMA_DIGSIG flags.

With this patch, changing the file timestamp will not remove the
file signature on new files.

Reported-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
2016-05-01 09:23:52 -04:00
Andreas Ziegler 93da17b185 security: integrity: Remove select to deleted option PUBLIC_KEY_ALGO_RSA
Commit d43de6c780 ("akcipher: Move the RSA DER encoding check to
the crypto layer") removed the Kconfig option PUBLIC_KEY_ALGO_RSA,
but forgot to remove a 'select' to this option in the definition of
INTEGRITY_ASYMMETRIC_KEYS.

Let's remove the select, as it's ineffective now.

Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-12 19:54:58 +01:00
David Howells 56104cf2b8 IMA: Use the the system trusted keyrings instead of .ima_mok
Add a config option (IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY)
that, when enabled, allows keys to be added to the IMA keyrings by
userspace - with the restriction that each must be signed by a key in the
system trusted keyrings.

EPERM will be returned if this option is disabled, ENOKEY will be returned if
no authoritative key can be found and EKEYREJECTED will be returned if the
signature doesn't match.  Other errors such as ENOPKG may also be returned.

If this new option is enabled, the builtin system keyring is searched, as is
the secondary system keyring if that is also enabled.  Intermediate keys
between the builtin system keyring and the key being added can be added to
the secondary keyring (which replaces .ima_mok) to form a trust chain -
provided they are also validly signed by a key in one of the trusted keyrings.

The .ima_mok keyring is then removed and the IMA blacklist keyring gets its
own config option (IMA_BLACKLIST_KEYRING).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-04-11 22:49:15 +01:00
David Howells 77f68bac94 KEYS: Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTED
Remove KEY_FLAG_TRUSTED and KEY_ALLOC_TRUSTED as they're no longer
meaningful.  Also we can drop the trusted flag from the preparse structure.

Given this, we no longer need to pass the key flags through to
restrict_link().

Further, we can now get rid of keyring_restrict_trusted_only() also.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11 22:44:15 +01:00
David Howells a511e1af8b KEYS: Move the point of trust determination to __key_link()
Move the point at which a key is determined to be trustworthy to
__key_link() so that we use the contents of the keyring being linked in to
to determine whether the key being linked in is trusted or not.

What is 'trusted' then becomes a matter of what's in the keyring.

Currently, the test is done when the key is parsed, but given that at that
point we can only sensibly refer to the contents of the system trusted
keyring, we can only use that as the basis for working out the
trustworthiness of a new key.

With this change, a trusted keyring is a set of keys that once the
trusted-only flag is set cannot be added to except by verification through
one of the contained keys.

Further, adding a key into a trusted keyring, whilst it might grant
trustworthiness in the context of that keyring, does not automatically
grant trustworthiness in the context of a second keyring to which it could
be secondarily linked.

To accomplish this, the authentication data associated with the key source
must now be retained.  For an X.509 cert, this means the contents of the
AuthorityKeyIdentifier and the signature data.


If system keyrings are disabled then restrict_link_by_builtin_trusted()
resolves to restrict_link_reject().  The integrity digital signature code
still works correctly with this as it was previously using
KEY_FLAG_TRUSTED_ONLY, which doesn't permit anything to be added if there
is no system keyring against which trust can be determined.

Signed-off-by: David Howells <dhowells@redhat.com>
2016-04-11 22:43:43 +01:00
David Howells 5ac7eace2d KEYS: Add a facility to restrict new links into a keyring
Add a facility whereby proposed new links to be added to a keyring can be
vetted, permitting them to be rejected if necessary.  This can be used to
block public keys from which the signature cannot be verified or for which
the signature verification fails.  It could also be used to provide
blacklisting.

This affects operations like add_key(), KEYCTL_LINK and KEYCTL_INSTANTIATE.

To this end:

 (1) A function pointer is added to the key struct that, if set, points to
     the vetting function.  This is called as:

	int (*restrict_link)(struct key *keyring,
			     const struct key_type *key_type,
			     unsigned long key_flags,
			     const union key_payload *key_payload),

     where 'keyring' will be the keyring being added to, key_type and
     key_payload will describe the key being added and key_flags[*] can be
     AND'ed with KEY_FLAG_TRUSTED.

     [*] This parameter will be removed in a later patch when
     	 KEY_FLAG_TRUSTED is removed.

     The function should return 0 to allow the link to take place or an
     error (typically -ENOKEY, -ENOPKG or -EKEYREJECTED) to reject the
     link.

     The pointer should not be set directly, but rather should be set
     through keyring_alloc().

     Note that if called during add_key(), preparse is called before this
     method, but a key isn't actually allocated until after this function
     is called.

 (2) KEY_ALLOC_BYPASS_RESTRICTION is added.  This can be passed to
     key_create_or_update() or key_instantiate_and_link() to bypass the
     restriction check.

 (3) KEY_FLAG_TRUSTED_ONLY is removed.  The entire contents of a keyring
     with this restriction emplaced can be considered 'trustworthy' by
     virtue of being in the keyring when that keyring is consulted.

 (4) key_alloc() and keyring_alloc() take an extra argument that will be
     used to set restrict_link in the new key.  This ensures that the
     pointer is set before the key is published, thus preventing a window
     of unrestrictedness.  Normally this argument will be NULL.

 (5) As a temporary affair, keyring_restrict_trusted_only() is added.  It
     should be passed to keyring_alloc() as the extra argument instead of
     setting KEY_FLAG_TRUSTED_ONLY on a keyring.  This will be replaced in
     a later patch with functions that look in the appropriate places for
     authoritative keys.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-04-11 22:37:37 +01:00
Al Viro ce23e64013 ->getxattr(): pass dentry and inode as separate arguments
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-11 00:48:00 -04:00
Al Viro fc64005c93 don't bother with ->d_inode->i_sb - it's always equal to ->d_sb
... and neither can ever be NULL

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-10 17:11:51 -04:00
Al Viro 81cd8896a6 constify ima_d_path()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-03-28 00:47:52 -04:00
Linus Torvalds bb7aeae3d6 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
 "There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
  fixes scattered across the subsystem.

  IMA now requires signed policy, and that policy is also now measured
  and appraised"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
  X.509: Make algo identifiers text instead of enum
  akcipher: Move the RSA DER encoding check to the crypto layer
  crypto: Add hash param to pkcs1pad
  sign-file: fix build with CMS support disabled
  MAINTAINERS: update tpmdd urls
  MODSIGN: linux/string.h should be #included to get memcpy()
  certs: Fix misaligned data in extra certificate list
  X.509: Handle midnight alternative notation in GeneralizedTime
  X.509: Support leap seconds
  Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
  X.509: Fix leap year handling again
  PKCS#7: fix unitialized boolean 'want'
  firmware: change kernel read fail to dev_dbg()
  KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
  KEYS: Reserve an extra certificate symbol for inserting without recompiling
  modsign: hide openssl output in silent builds
  tpm_tis: fix build warning with tpm_tis_resume
  ima: require signed IMA policy
  ima: measure and appraise the IMA policy itself
  ima: load policy using path
  ...
2016-03-17 11:33:45 -07:00
James Morris 88a1b564a2 Merge tag 'keys-next-20160303' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next 2016-03-04 11:39:53 +11:00
David Howells 4e8ae72a75 X.509: Make algo identifiers text instead of enum
Make the identifier public key and digest algorithm fields text instead of
enum.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-03 21:49:27 +00:00
David Howells d43de6c780 akcipher: Move the RSA DER encoding check to the crypto layer
Move the RSA EMSA-PKCS1-v1_5 encoding from the asymmetric-key public_key
subtype to the rsa crypto module's pkcs1pad template.  This means that the
public_key subtype no longer has any dependencies on public key type.

To make this work, the following changes have been made:

 (1) The rsa pkcs1pad template is now used for RSA keys.  This strips off the
     padding and returns just the message hash.

 (2) In a previous patch, the pkcs1pad template gained an optional second
     parameter that, if given, specifies the hash used.  We now give this,
     and pkcs1pad checks the encoded message E(M) for the EMSA-PKCS1-v1_5
     encoding and verifies that the correct digest OID is present.

 (3) The crypto driver in crypto/asymmetric_keys/rsa.c is now reduced to
     something that doesn't care about what the encryption actually does
     and and has been merged into public_key.c.

 (4) CONFIG_PUBLIC_KEY_ALGO_RSA is gone.  Module signing must set
     CONFIG_CRYPTO_RSA=y instead.

Thoughts:

 (*) Should the encoding style (eg. raw, EMSA-PKCS1-v1_5) also be passed to
     the padding template?  Should there be multiple padding templates
     registered that share most of the code?

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-03-03 21:49:27 +00:00
Mimi Zohar 95ee08fa37 ima: require signed IMA policy
Require the IMA policy to be signed when additional rules can be added.

v1:
- initialize the policy flag
- include IMA_APPRAISE_POLICY in the policy flag

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-21 09:34:23 -05:00
Mimi Zohar 19f8a84713 ima: measure and appraise the IMA policy itself
Add support for measuring and appraising the IMA policy itself.

Changelog v4:
- use braces on both if/else branches, even if single line on one of the
branches - Dmitry
- Use the id mapping - Dmitry

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-21 09:34:22 -05:00
Dmitry Kasatkin 7429b09281 ima: load policy using path
We currently cannot do appraisal or signature vetting of IMA policies
since we currently can only load IMA policies by writing the contents
of the policy directly in, as follows:

cat policy-file > <securityfs>/ima/policy

If we provide the kernel the path to the IMA policy so it can load
the policy itself it'd be able to later appraise or vet the file
signature if it has one.  This patch adds support to load the IMA
policy with a given path as follows:

echo /etc/ima/ima_policy > /sys/kernel/security/ima/policy

Changelog v4+:
- moved kernel_read_file_from_path() error messages to callers
v3:
- moved kernel_read_file_from_path() to a separate patch
v2:
- after re-ordering the patches, replace calling integrity_kernel_read()
  to read the file with kernel_read_file_from_path() (Mimi)
- Patch description re-written by Luis R. Rodriguez

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-21 09:34:05 -05:00
Mimi Zohar d9ddf077bb ima: support for kexec image and initramfs
Add IMA policy support for measuring/appraising the kexec image and
initramfs. Two new IMA policy identifiers KEXEC_KERNEL_CHECK and
KEXEC_INITRAMFS_CHECK are defined.

Example policy rules:
measure func=KEXEC_KERNEL_CHECK
appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig
measure func=KEXEC_INITRAMFS_CHECK
appraise func=KEXEC_INITRAMFS_CHECK appraise_type=imasig

Moving the enumeration to the vfs layer simplified the patches, allowing
the IMA changes, for the most part, to be separated from the other
changes.  Unfortunately, passing either a kernel_read_file_id or a
ima_hooks enumeration within IMA is messy.

Option 1: duplicate kernel_read_file enumeration in ima_hooks

enum kernel_read_file_id {
	...
        READING_KEXEC_IMAGE,
        READING_KEXEC_INITRAMFS,
        READING_MAX_ID

enum ima_hooks {
	...
	KEXEC_KERNEL_CHECK
	KEXEC_INITRAMFS_CHECK

Option 2: define ima_hooks as extension of kernel_read_file
eg: enum ima_hooks {
        FILE_CHECK = READING_MAX_ID,
        MMAP_CHECK,

In order to pass both kernel_read_file_id and ima_hooks values, we
would need to specify a struct containing a union.

struct caller_id {
        union {
                enum ima_hooks func_id;
                enum kernel_read_file_id read_id;
        };
};

Option 3: incorportate the ima_hooks enumeration into kernel_read_file_id,
perhaps changing the enumeration name.

For now, duplicate the new READING_KEXEC_IMAGE/INITRAMFS in the ima_hooks.

Changelog v4:
- replaced switch statement with a kernel_read_file_id to an ima_hooks
id mapping array - Dmitry
- renamed ima_hook tokens KEXEC_CHECK and INITRAMFS_CHECK to
KEXEC_KERNEL_CHECK and KEXEC_INITRAMFS_CHECK respectively - Dave Young

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Cc: Dave Young <dyoung@redhat.com>
2016-02-21 09:06:16 -05:00
Mimi Zohar c6af8efe97 ima: remove firmware and module specific cached status info
Each time a file is read by the kernel, the file should be re-measured and
the file signature re-appraised, based on policy.  As there is no need to
preserve the status information, this patch replaces the firmware and
module specific cache status with a generic one named read_file.

This change simplifies adding support for other files read by the kernel.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-21 09:06:13 -05:00
Mimi Zohar a1db742094 module: replace copy_module_from_fd with kernel version
Replace copy_module_from_fd() with kernel_read_file_from_fd().

Although none of the upstreamed LSMs define a kernel_module_from_file
hook, IMA is called, based on policy, to prevent unsigned kernel modules
from being loaded by the original kernel module syscall and to
measure/appraise signed kernel modules.

The security function security_kernel_module_from_file() was called prior
to reading a kernel module.  Preventing unsigned kernel modules from being
loaded by the original kernel module syscall remains on the pre-read
kernel_read_file() security hook.  Instead of reading the kernel module
twice, once for measuring/appraising and again for loading the kernel
module, the signature validation is moved to the kernel_post_read_file()
security hook.

This patch removes the security_kernel_module_from_file() hook and security
call.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2016-02-21 09:06:12 -05:00
Mimi Zohar 39eeb4fb97 security: define kernel_read_file hook
The kernel_read_file security hook is called prior to reading the file
into memory.

Changelog v4+:
- export security_kernel_read_file()

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
2016-02-21 09:06:09 -05:00
Mimi Zohar e40ba6d56b firmware: replace call to fw_read_file_contents() with kernel version
Replace the fw_read_file_contents with kernel_file_read_from_path().

Although none of the upstreamed LSMs define a kernel_fw_from_file hook,
IMA is called by the security function to prevent unsigned firmware from
being loaded and to measure/appraise signed firmware, based on policy.

Instead of reading the firmware twice, once for measuring/appraising the
firmware and again for reading the firmware contents into memory, the
kernel_post_read_file() security hook calculates the file hash based on
the in memory file buffer.  The firmware is read once.

This patch removes the LSM kernel_fw_from_file() hook and security call.

Changelog v4+:
- revert dropped buf->size assignment - reported by Sergey Senozhatsky
v3:
- remove kernel_fw_from_file hook
- use kernel_file_read_from_path() - requested by Luis
v2:
- reordered and squashed firmware patches
- fix MAX firmware size (Kees Cook)

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
2016-02-21 09:03:44 -05:00
Mimi Zohar cf22221786 ima: define a new hook to measure and appraise a file already in memory
This patch defines a new IMA hook ima_post_read_file() for measuring
and appraising files read by the kernel. The caller loads the file into
memory before calling this function, which calculates the hash followed by
the normal IMA policy based processing.

Changelog v5:
- fail ima_post_read_file() if either file or buf is NULL
v3:
- rename ima_hash_and_process_file() to ima_post_read_file()

v1:
- split patch

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-20 22:35:08 -05:00
Mimi Zohar 98304bcf71 ima: calculate the hash of a buffer using aynchronous hash(ahash)
Setting up ahash has some overhead.  Only use ahash to calculate the
hash of a buffer, if the buffer is larger than ima_ahash_minsize.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-18 17:14:44 -05:00
Dmitry Kasatkin 11d7646df8 ima: provide buffer hash calculation function
This patch provides convenient buffer hash calculation function.

Changelog v3:
- fix while hash calculation - Dmitry
v1:
- rewrite to support loff_t sized buffers - Mimi
  (based on Fenguang Wu's testing)

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-18 17:14:28 -05:00
Mimi Zohar 4ad87a3d74 ima: use "ima_hooks" enum as function argument
Cleanup the function arguments by using "ima_hooks" enumerator as needed.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-18 17:13:58 -05:00
Mimi Zohar b5269ab3e2 ima: refactor ima_policy_show() to display "ima_hooks" rules
Define and call a function to display the "ima_hooks" rules.

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-18 17:13:56 -05:00
Dmitry Kasatkin 1525b06d99 ima: separate 'security.ima' reading functionality from collect
Instead of passing pointers to pointers to ima_collect_measurent() to
read and return the 'security.ima' xattr value, this patch moves the
functionality to the calling process_measurement() to directly read
the xattr and pass only the hash algo to the ima_collect_measurement().

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-18 17:13:32 -05:00
Tadeusz Struk eb5798f2e2 integrity: convert digsig to akcipher api
Convert asymmetric_verify to akcipher api.

Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
2016-02-18 14:52:32 +00:00
Ryan Ware 613317bd21 EVM: Use crypto_memneq() for digest comparisons
This patch fixes vulnerability CVE-2016-2085.  The problem exists
because the vm_verify_hmac() function includes a use of memcmp().
Unfortunately, this allows timing side channel attacks; specifically
a MAC forgery complexity drop from 2^128 to 2^12.  This patch changes
the memcmp() to the cryptographically safe crypto_memneq().

Reported-by: Xiaofei Rex Guo <xiaofei.rex.guo@intel.com>
Signed-off-by: Ryan Ware <ware@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-02-12 18:36:47 +11:00
David Howells 50d35015ff KEYS: CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now
mandatory if the keyrings facility is enabled (it's used by libkeyutils in
userspace).

The defconfig references were removed with:

	perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \
	    `git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y`

and the integrity Kconfig fixed by hand.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andreas Ziegler <andreas.ziegler@fau.de>
cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
2016-02-10 10:13:27 +00:00
Colin Ian King c75d8e96f3 IMA: fix non-ANSI declaration of ima_check_policy()
ima_check_policy() has no parameters, so use the normal void
parameter convention to make it match the prototype in the header file
security/integrity/ima/ima.h

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2016-02-08 18:17:38 -05:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00