Commit Graph

361 Commits

Author SHA1 Message Date
Andreas Färber ae930c912b rtc: Add Realtek RTD1295
Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and
mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions.

The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and
Beelink Lake I.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:02 +02:00
Miodrag Dinic f22d9cdcb5 rtc: goldfish: Add RTC driver for Android emulator
Add device driver for a virtual RTC device in Android emulator.

The compatible string used by OS for binding the driver is defined
as "google,goldfish-rtc".

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:18 +02:00
Nikita Yushchenko 0759c886f4 rtc: ds1307: add basic support for ds1341 chip
This adds support for reading and writing date/time from/to ds1341 chip.

ds1341 chip has other features - alarms, input clock (can be used instead
of intercal oscillator for better accuracy), output clock ("square wave
generation"). However, not all of that is available at the same time.
Same chip pins, CLKIN/nINTA and SQW/nINTB, can be used either for
input/output clocks, or for alarm interrupts. Role of these pins on
particular board depends on hardware wiring.

We can add device tree properties that describe if each of pins is wired
as clock, or as interrupt, or left unconnected, and enable support for
corresponding functionality based on that. But that is cumbersome, requires
hardware for testing, and has to deal with bit enabling/disabling output
clock also affects which pins alarm interrupts are routed to.

Another factor is that there are hardware setups (i.e. ZII RDU2) that
power DS1341 from SuperCap, which makes power saving critical. For such
setups, kernel driver should leave register bits that control mentioned
pins in the state configured by bootloader.

Given all that, it was decided to limit support to "only date/time" for
now. That is enough for common use case. Full (and cumbersome)
implementation can be added later if ever needed.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:18 +02:00
Elaine Zhang 79c676c4e3 rtc: rk808: Name RK805 in Kconfig for RTC_DRV_RK808
The RK808 and RK805 PMICs are using a similar register map.
We can reuse the rtc driver for the RK805 PMIC. So let's add
the RK805 in the Kconfig description.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:12 +02:00
Alexandre Belloni 697e5a47aa rtc: add generic nvmem support
Many RTCs have an on board non volatile storage. It can be battery backed
RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace
and in-kernel consumers.

This stays compatible with the previous (non documented) ABI that was using
/sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about
the deprecation.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07 13:14:14 +02:00
Kirill Esipov c35c4195f9 rtc: ds3232: add temperature support
DS3232/DS3234 has the temperature registers with a resolution of 0.25
degree celsius. This enables to get the value through hwmon.

	# cat /sys/class/hwmon/hwmon0/temp1_input
	37250

Signed-off-by: Kirill Esipov <yesipov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06 22:37:16 +02:00
Linus Walleij 1d61d2592c rtc: gemini/ftrtc010: rename driver and symbols
The Gemini RTC is actually a generic IP block from Faraday
Technology names FTRTC010. Rename the driver file and all
symbols to match this IP name.

The relationship can be clearly seen in the U-Boot driver
posted by Po-Yu Chuang for the Faraday A320 board:
https://lists.denx.de/pipermail/u-boot/2009-September/061326.html

Remove the dependency on ARCH_GEMINI but select the driver
for ARCH_GEMINI so we get a smooth transition. The IP block
is synthsized on different silicon and architectures.

Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06 22:37:15 +02:00
Brian Norris c4f07ecee2 rtc: brcmstb-waketimer: Add Broadcom STB wake-timer
This adds support for the Broadcom STB wake-timer which is a timer in
the chip's 27Mhz clock domain that offers the ability to wake the system
(wake-up source) from suspend states (S2, S3, S5). It is supported using
the rtc framework allowing us to configure alarms for system wake-up.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-05 23:11:59 +02:00
Chris Brandt dab5aec64b rtc: sh: add support for rza series
This same RTC is used in RZ/A series MPUs, therefore with some slight
changes, this driver can be reused. Additionally, since ARM architectures
require Device Tree configurations, device tree support has been added.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-03 18:01:34 +02:00
Sebastian Reichel dd3bf50b35 rtc: cpcap: new rtc driver
This driver supports the Motorola CPCAP PMIC found on
some of Motorola's mobile phones, such as the Droid 4.

Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:32:35 +01:00
Linus Torvalds 5782fd14aa RTC for 4.11
Subsystem:
  - constify rtc_class_ops structures
 
 New driver:
  - STM32
 
 Drivers:
  - armada38x: fix errata, Armada 7K/8K support
  - ds3232: fix wakeup support
  - gemini: DT support
  - m48t86: huge cleanup and platform_data removal
  - mcp795: alarm support
  - sun6i: proper oscillator handling
  - tegra: proper clock handling
  - tps65910: calibration support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAlizZLQACgkQ2KKDO9oT
 4sISIw//Zl96KIXqeC+En+8v8Sa0pham/mcLbKYujnFIi1mMaesEXJJClALXYAGQ
 r/fwXkYowC14AMXGuV5vMMVAVisJpj1gtMmpom+9/7mYtkFOIUsB8Sis8dMqgTqx
 JFBho7JvPJcwE7BLzUNRzX4tWhFhNm0epyMrsrQrBSeLx3PD8xg5v2kPYuZHdYU0
 63Bovkq6zvH9/WdO8DLXw/nc/Y0Bo66rlvJkcaNfjBrdFTRvRAM5JIiJuxewR+jY
 3bTQ8PQjnHAWIj/RhrwguGTLDlgJKcpitB06Y53TdRaNtVfJuEN8z6EjNkR37kyS
 ZJnPgihCoH6l7v28uY4e5BAg/Fe3ZhDrPmhZWq8rEkByeQpSUWgrE/DtcoC0OkZO
 l2fU/y2vq4za7CpRPp5bvq3sF0PbRHSF0o8rvmHlQZI/mwwYbwF9gk1vg5adyH7i
 1UuTGoDXxcMYZPJm3zezE1bUa4OAyjH1NhrvPvinlDw+aekaai2eFUKIbJim+dJx
 tEVPATPlDk/Ngwth1hpE8D/tOdoQhWtfNk7+zo7MNtMjAO1h/DxSLHXJ9mvCwcPh
 lPT9BmQxT1HECIa5gjN1R+5X5or5z8LPcNGO9TedIchfZ8qBGzsWOt9bXlw2dgI2
 qmXo6IrjCN88kf+qsVA4FKLmaqgpb9+Yb+5cPlhEOKvxUhY47Nc=
 =Go5q
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - constify rtc_class_ops structures

 New driver:
   - STM32

 Drivers:
   - armada38x: fix errata, Armada 7K/8K support
   - ds3232: fix wakeup support
   - gemini: DT support
   - m48t86: huge cleanup and platform_data removal
   - mcp795: alarm support
   - sun6i: proper oscillator handling
   - tegra: proper clock handling
   - tps65910: calibration support"

* tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits)
  rtc: ds3232: Call device_init_wakeup before device_register
  rtc: pcf2127: bulk read only date and time registers.
  rtc: armada38x: Add support for Armada 7K/8K
  rtc: armada38x: Prepare driver to manage different versions
  rtc: ds3232: Add regmap max_register definition.
  rtc: ds3232: Cleanup whitespace around register and bit definitions.
  rtc: m48t86: remove unused platform_data
  ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources
  ARM: Orion5x: ts78xx: remove RTC detection
  ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources
  rtc: m48t86: verify that the RTC is actually present
  rtc: m48t86: add NVRAM support
  rtc: m48t86: allow driver to manage its resources
  rtc: m48t86: shorten register name defines
  bindings: rtc: correct wrong reference in required properties
  rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()
  rtc: sun6i: extend test coverage
  rtc: sun6i: Fix compatibility with old DT binding
  rtc: snvs: add a missing write sync
  rtc: bq32000: add support to enable disable the trickle charge FET bypass
  ...
2017-02-27 19:59:21 -08:00
Alexandre Belloni 93946c49cd rtc: sun6i: extend test coverage
COMPILE_TEST was wrongly placed, move it to the "depends on" line.
Also depend on COMMON_CLK as the driver now needs it to be properly
compiled.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-01 13:55:07 +01:00
Alexandre Belloni 586655d278 rtc: jz4740: make the driver buildable as a module again
By using kernel_halt() instead of machine_halt(), we can make the driver
build as a module.
However, jz4740 platforms not loading this module will not be able to power
off.

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Revert "rtc: jz4740: make the driver builtin only"

This reverts commit b9168c539c.
2017-01-26 23:03:21 +01:00
Maxime Ripard 3753941475 rtc: sun6i: Disable the build as a module
Since we have to provide the clock very early on, the RTC driver cannot be
built as a module. Make sure that won't happen.

Cc: stable@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-24 18:45:29 +01:00
Amelie Delaunay 4e64350f42 rtc: add STM32 RTC driver
This patch adds support for the STM32 RTC.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13 01:40:31 +01:00
Akinobu Mita 0b6a8f5c9b rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19 00:59:21 +01:00
Nicolae Rosia 1c02cbfec5 rtc: twl: make driver DT only
Since there are no platform based users and all users
of this code are TI OMAP-based which is DT only, it makes
sense to remove unused code.

Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-30 21:21:33 +01:00
Alexandre Belloni 72d3d79f8d rtc: fix typos in Kconfig
s/buillt/built/g

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-09 01:37:04 +01:00
Alexandre Belloni b9168c539c rtc: jz4740: make the driver builtin only
Since the driver is now calling machine_halt() that is not exported, it has
to be built in the kernel. Building it as a module will fail at linking
time.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-09 01:37:03 +01:00
Krzysztof Kozlowski 959df7778b rtc: Enable compile testing for Maxim and Samsung drivers
max8907, max77686 and s5m RTC drivers can be compile tested to increase
build coverage.  The s5m-rtc uses REGMAP_IRQ so add this as explicit
dependency.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-05 00:07:41 +01:00
Paul Cercueil cd563200c0 rtc: jz4740: Add support for the RTC in the jz4780 SoC
The RTC unit present in the JZ4780 works mostly the same as the one in
the JZ4740. The major difference is that register writes need to be
explicitly enabled, by writing a magic code (0xA55A) to a "write
enable" register before each access.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-04 23:48:39 +01:00
Christoph Hellwig 290cd0f07f rtc: cmos: don't refer to asm-generic/rtc.h
That header has been gone for a while.  I've fixed up the Kconfig
comment, but the one in rtc-cmos.c doesn't make any sense to me
even looking at its history.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-19 09:41:48 +02:00
Linus Torvalds 8b70f71617 RTC for 4.9
Subsystem:
  - delete owner assignment in multiple drivers
  - constify rtc_class_ops structures
 
 Drivers:
  - ac100: support clock-output-names
  - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes
  - ds1307: fix century bit support while staying comaptible with previous
    behaviour by default
  - ds1347: switch to regmap
  - isl12057 is now handled by ds1307
  - omap: support external wakeup
  - rv8803: allow to disable voltage drop detection
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCgAGBQJYASBeAAoJENiigzvaE+LCDO4QAJAi0TV2i0vYaJLDWyCGDx3P
 cts/Su2JdLgeLxilKvyYgwUpp8fsv681ZaZi+a6Jln/cn0MOcWwJoopiC30CSR8M
 9UxmRsFR9Ev/Cm/NZChcsTQwyTHOumnzZzxtnYr0RWOw7s4K68gEQEpWWT7qHTp1
 KVwfIvjAIPcozw25QWWGUWHu22PsI38NTH5Bg+rimMCToNbSDFAm+d62cdeIbkJF
 FoQIut0/Lh5UZ12+T8l0iBydY3bINeo1SZY5yAwQGRzJBecxRccbtKlnUjXnywke
 xAO5KQzegkLPTU4R6ssK/SQfVlDrfG3fkjWNvUEC/Vyw94v2SaFB1XjvlCXwL3mN
 XqzWXeestqFvKRjbYsM0NwsPX4+wxjDNq9YaAhpFYDAA9BL3vREB41qf/dCOFywG
 tqHBRpwN9g7u/72SLJ3icYdjmpaQIQbLF9wl8LJiPrWn4xwTNVIB2u3APcSuxE7/
 q49jD72LyEVhOUyGs0Hev584s4PC2fMoveq52ng0gMVbOtX0A0FJQQMcR2/2DIOp
 GLzPVuupx/8Eck9RFdr06Iv74j/bD7tScfiifZt6LfY5c8K7HOYykoskaRz3XMV4
 gx7Aajb8+jMVvI2TOthIa/WCXktQ8MBWTMZ6vbCxxpIRPBYuDqKmt1hXsYR5s6ql
 fMrn+tWltdRQKGIF2GrR
 =ZqqR
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.9

  Subsystem:
   - delete owner assignment in multiple drivers
   - constify rtc_class_ops structures

  Drivers:
   - ac100: support clock-output-names
   - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes
   - ds1307: fix century bit support while staying comaptible with
     previous behaviour by default
   - ds1347: switch to regmap
   - isl12057 is now handled by ds1307
   - omap: support external wakeup
   - rv8803: allow to disable voltage drop detection"

* tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits)
  rtc: rv8803: set VDETOFF and SWOFF via device tree
  dt/bindings: Add bindings for Micro Crystal rv8803
  devicetree: Add Micro Crystal AG vendor id
  rtc: cmos: avoid unused function warning
  rtc: ac100: Add NULL checking for devm_kzalloc call
  rtc: ds1347: changed raw spi calls to register map calls
  rtc: cmos: Restore alarm after resume
  rtc: cmos: Clear ACPI-driven alarms upon resume
  rtc: omap: Support ext_wakeup configuration
  rtc: cmos: Initialize hpet timer before irq is registered
  rtc: asm9260: rework locking
  rtc: asm9260: allow COMPILE_TEST
  rtc: constify rtc_class_ops structures
  rtc: ac100: support clock-output-names in device tree binding
  rtc: rx6110: remove owner assignment
  rtc: pic32: Delete owner assignment
  rtc: bq32k: Fix handling of oscillator failure flag
  rtc: bq32k: Use correct mask name for 'minutes' register.
  rtc: sysfs: fix a cast removing the const attribute
  Documentation: dt: Intersil isl12057 is not a trivial device
  ...
2016-10-14 13:13:44 -07:00
Lee Jones b304746c2a Merge branches 'ib-mfd-gpio-4.9', 'ib-mfd-gpio-regulator-4.9', 'ib-mfd-input-4.9', 'ib-mfd-regulator-4.9', 'ib-mfd-regulator-4.9.1', 'ib-mfd-regulator-rtc-4.9', 'ib-mfd-regulator-rtc-4.9-1' and 'ib-mfd-rtc-4.9' into ibs-for-mfd-merged 2016-10-04 15:47:01 +01:00
Raghavendra Ganiga ee85bb5bbe rtc: ds1347: changed raw spi calls to register map calls
This patch changes calls of spi read write calls to register map
read and write calls in rtc ds1347

Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-22 00:14:40 +02:00
Marcin Niestroj 97ea1906b3 rtc: omap: Support ext_wakeup configuration
Support configuration of ext_wakeup sources. This patch makes it
possible to enable ext_wakeup and set it's polarity, depending on board
configuration. AM335x's dedicated PMIC (tps65217) uses ext_wakeup to
notify about power-button presses. Handling power-button presses enables
to recover from RTC-only power states correctly.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21 21:46:04 +02:00
Alexandre Belloni 7f742e8e8a rtc: asm9260: allow COMPILE_TEST
The rtc-asm9260 driver compiles correctly on other architectures, add
COMPILE_TEST to improve code coverage.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-05 17:15:50 +02:00
Alexandre Belloni e8aa7dcbf0 rtc: isl12057: remove driver
The Intersil isl12057 is now supported by the ds1307 driver.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Alexandre Belloni 78aaa06d79 rtc: ds1307: add Intersil ISL12057 support
Intersil ISL12057 is a drop-in replacement for DS1337. It can be supported
by the ds1307 driver.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Alexandre Belloni 50d6c0ea81 rtc: ds1307: fix century bit support
Add an option to properly support the century bit of ds1337 and compatibles
and ds1340.
Because the driver had a bug until now, it is not possible to switch users
to the fixed code directly as RTCs in the field will wrongly have the
century bit set.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Wadim Egorov 5d2fd5c79e rtc: Kconfig: Name RK818 in Kconfig for RTC_DRV_RK808
The RK808 and RK818 PMICs are using a similar register map.
We can reuse the rtc driver for the RK818 PMIC. So let's add
the RK818 in the Kconfig description.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-31 13:48:57 +01:00
Chen-Yu Tsai d00a18a42c rtc: ac100: Add RTC driver for X-Powers AC100
X-Powers AC100 is a codec / RTC combo chip. This driver supports
the RTC sub-device.

The RTC block also has clock outputs and non-volatile storage.
Non-volatile storage wthin the RTC hardware is not supported.
Clock output support is added in the next patch.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-08 12:53:36 +01:00
Benoît Thébaudeau 34166a00ec rtc: rv8803: Kconfig: Indicate rx8900 support
This driver supports the Epson RX8900, but this was not indicated in
Kconfig.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-28 09:59:30 +02:00
Arnd Bergmann d6faca40f4 rtc: move mc146818 helper functions out-of-line
The mc146818_get_time/mc146818_set_time functions are rather large
inline functions in a global header file and are used in several
drivers and in x86 specific code.

Here we move them into a separate .c file that is compiled whenever
any of the users require it. This also lets us remove the linux/acpi.h
header inclusion from mc146818rtc.h, which in turn avoids some
warnings about duplicate definition of the TRUE/FALSE macros.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-26 01:20:08 +02:00
Arnd Bergmann 5ee98ab3a8 mn10300: use RTC_DRV_CMOS instead of CONFIG_RTC
nn10300 has a dependency on mc146818_get_time/mc146818_set_time,
which we want to move from the mc146818rtc.h header into the
rtc subsystem, which in turn is not usable on mn10300.

This changes mn10300 to use the modern rtc-cmos driver instead
of the old RTC driver, and that in turn lets us completely
remove the read_persistent_clock/update_persistent_clock callbacks.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-26 01:20:08 +02:00
Venkat Prashanth B U 06776c8921 rtc: add support for Maxim max6916
Add support for Maxim max6916 RTC.

Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-04 16:05:59 +02:00
Mylène Josserand c2a1c14540 rtc: rv3029: Add support of RV3049
Add support of Microcrystal RV3049 RTC (SPI) using regmap on the
RV3029 (I2C) driver.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-21 17:06:52 +02:00
Sergey Yanovich d25a5ed37d rtc: ds1302: rewrite using SPI
DS1302 is an half-duplex SPI device. The driver respects this fact now.
Pin configurations should be implemented using SPI subsystem.

Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-05-20 12:33:51 +02:00
Alexandre Belloni 399221ccf4 rtc: rv3029: stop mentioning rv3029c2
rv3029c2 is actually rv3029. c2 denotes an option.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-15 00:29:33 +01:00
Akinobu Mita 9408ec1af8 rtc: pcf2127: add support for spi interface
pcf2127 has selectable I2C-bus and SPI-bus interface support.

This adds support for SPI interface.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:41 +01:00
Michael Büsch a696b31e2f rtc: rv3029: Add thermometer hwmon support
This adds support to
- enable/disable the thermometer
- set the temperature scanning interval
- read the current temperature that is used for temp compensation.
via hwmon interface

Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:40 +01:00
Akinobu Mita 080481f54e rtc: merge ds3232 and ds3234
According to "Feature Comparison of the DS323x Real-Time Clocks"
(http://pdfserv.maximintegrated.com/en/an/AN5143.pdf), DS3232 and
DS3234 are very similar.

This merges rtc-ds3232 and rtc-ds3234 with using regmap.
This change also enables to support alarm for ds3234.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:35 +01:00
Alexandre Belloni 832315b05b rtc: pxa: fix Kconfig indentation
The pxa section is indented using spaces, use tabs.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:34 +01:00
Alexandre Belloni 7a587eae2a rtc: enable COMPILE_TEST
There are several arch-specific RTC drivers that can be successfully
compiled on other platforms. Add a COMPILE_TEST dependency for those.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-03-14 17:08:31 +01:00
Alexandre Belloni e0252ec77b rtc: always show I2C
Always show there is an I2C section, like the other sections.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:28 +01:00
Laxman Dewangan 726fe738bd rtc: max77686: Add support for MAX20024/MAX77620 RTC IP
Maxim Semiconductor's PMIC MAX77686 has RTC IP which is
reused in the MAX77620/MAX20024 PMICs.

Add support for these devices in MAX77686 RTC driver. This
device does not have RTC alarm pending status outside of
RTC IP. The RTC IP is having separate I2C address for its
register access.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:27 +01:00
Alexandre Belloni d2c6b8743b rtc: rv3029: reword Kconfig option
The Kconfig option for rv3029 is not mentioning any part number, explicitly
show rv3029.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:25 +01:00
Soren Brinkmann d084885e98 rtc: Group Kconfig entries by vendor
The RTC entries are mostly grouped by vendor. Move the few outliers in
place.
Also, change the one occurrence of 'nxp' to 'NXP' to make all NXP
entries consistent.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:22 +01:00
Joshua Henderson 51aa905c91 rtc: pic32: Add PIC32 real time clock driver
This driver adds support for the PIC32 real time clock and calendar
peripheral:
	- reading and setting time
	- alarms provided by dedicated IRQ

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:21 +01:00
Oleksij Rempel 125e550fd2 rtc: add Alphascale asm9260 driver
Add support for RTC controller found on Alphascale asm9260
SoC.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:14 +01:00