Commit Graph

41 Commits

Author SHA1 Message Date
Stephen Boyd 36d68f64c4 ARM: Add Krait L2 register accessor functions
Krait CPUs have a handful of L2 cache controller registers that
live behind a cp15 based indirection register. First you program
the indirection register (l2cpselr) to point the L2 'window'
register (l2cpdr) at what you want to read/write.  Then you
read/write the 'window' register to do what you want. The
l2cpselr register is not banked per-cpu so we must lock around
accesses to it to prevent other CPUs from re-pointing l2cpdr
underneath us.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17 13:14:33 -07:00
Geert Uytterhoeven 0fff900184 ARM: Always build secure_cntvoff.S on ARM V7 to fix shmobile !SMP build
If CONFIG_SMP=n, building a kernel for R-Car Gen2 fails with:

    arch/arm/mach-shmobile/setup-rcar-gen2.o: In function `rcar_gen2_timer_init':
    setup-rcar-gen2.c:(.init.text+0x30): undefined reference to `secure_cntvoff_init'

Indeed, on R-Car Gen2 SoCs, secure_cntvoff_init() is not only needed for
secondary CPUs, but also for the boot CPU.  This is most visible on SoCs
with Cortex A7 cores (e.g. R-Car E2, cfr. commit 9ce3fa6816 ("ARM:
shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794")),
but Cortex A15 is affected, too.

Fix this by always providing secure_cntvoff_init() when building for ARM
V7.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7c607944bc ("ARM: smp: Add initialization of CNTVOFF")
Fixes: cad160ed0a ("ARM: shmobile: Convert file to use cntvoff")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23 18:26:48 -07:00
Mylène Josserand 7c607944bc ARM: smp: Add initialization of CNTVOFF
The CNTVOFF register from arch timer is uninitialized.
It should be done by the bootloader but it is currently not the case,
even for boot CPU because this SoC is booting in secure mode.
It leads to an random offset value meaning that each CPU will have a
different time, which isn't working very well.

Add assembly code used for boot CPU and secondary CPU cores to make
sure that the CNTVOFF register is initialized. Because this code can
be used by different platforms, add this assembly file in ARM's common
folder.

Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-05-08 14:50:42 +02:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Walleij ba3fae06c7 ARM/clk: move the ICST library to drivers/clk
This moves the ICST clock divider helper library from
arch/arm/common to drivers/clk/versatile so it is maintained
with the other clock drivers.

We keep the structure as a helper library intact and do not
fuse it with the clk-icst.c Versatile ICST clock driver: there
may be other users out there that need to use this library for
their clocking, and then it will be helpful to keep the
library contained. (The icst.[c|h] files could just be moved
to drivers/clk/lib or a similar location to share the library.)

Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-07 11:58:12 +02:00
Peter Ujfalusi 2b6b3b7420 ARM/dmaengine: edma: Merge the two drivers under drivers/dma/
Move the code out from arch/arm/common and merge it inside of the dmaengine
driver.
This change is done with as minimal (if eny) functional change to the code
as possible to avoid introducing regression.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14 19:57:11 +05:30
Sudeep Holla 0b7402dce4 ARM: 8366/1: move Dual-Timer SP804 driver to drivers/clocksource
The ARM Dual-Timer SP804 module is peripheral found not only on ARM32
platforms but also on ARM64 platforms.

This patch moves the driver out of arch/arm to driver/clocksource
so that it can be used on ARM64 platforms also.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Olof Johansson <olof@lixom.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-06-02 09:58:18 +01:00
Dave Martin ea36d2ab1a ARM: 7962/2: Make all mcpm functions notrace
The functions in mcpm_entry.c are mostly intended for use during
scary cache and coherency disabling sequences, or do other things
which confuse trace ... like powering a CPU down and not
returning. Similarly for the backend code.

For simplicity, this patch just makes whole files notrace.
There should be more than enough traceable points on the paths to
these functions, but we can be more fine-grained later if there is
a need for it.

Jon Medhurst:
Also added spc.o to the list of files as it contains functions used by
MCPM code which have comments comments like: "might be used in code
paths where normal cacheable locks are not working"

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-02-18 19:39:33 +00:00
Linus Torvalds f47671e2d8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...
2013-11-14 08:51:29 +09:00
Linus Walleij 136dfa5eda ARM: delete mach-shark
The Shark machine sub-architecture (also known as DNARD, the
DIGITAL Network Appliance Reference Design) lacks a maintainer
able to apply and test patches to modernize the architecture.

It is suspected that the current kernel, while it compiles,
does not even boot on this machine. The listed maintainer has
expressed that he will not be able to spend any time on the
maintenance for the coming year.

So let's delete it from the kernel for now. It can always be
resurrected with git revert if maintenance is resumed.

As the VIA82c505 PCI adapter was only used by this
architecture, that gets deleted too.

Cc: arm@kernel.org
Cc: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-17 12:34:36 +02:00
Nicolas Pitre b22537c682 ARM: bL_switcher: add a simple /dev user interface for debugging purposes
Only the basic call to aid debugging.

*** NOT FOR PRODUCTION ***

Usage:

	echo <cpuid>,<clusterid> > /dev/b.L_switcher

where <cpuid> is the logical CPU number, and <clusterid> is 0 for the
first cluster and 1 for the second cluster.

Signed-off-by: nicolas Pitre <nico@linaro.org>
2013-08-05 00:13:00 -04:00
Nicolas Pitre 1c33be5749 ARM: b.L: core switcher code
This is the core code implementing big.LITTLE switcher functionality.
Rationale for this code is available here:

http://lwn.net/Articles/481055/

The main entry point for a switch request is:

void bL_switch_request(unsigned int cpu, unsigned int new_cluster_id)

If the calling CPU is not the wanted one, this wrapper takes care of
sending the request to the appropriate CPU with schedule_work_on().

At the moment the core switch operation is handled by bL_switch_to()
which must be called on the CPU for which a switch is requested.

What this code does:

  * Return early if the current cluster is the wanted one.

  * Close the gate in the kernel entry vector for both the inbound
    and outbound CPUs.

  * Wake up the inbound CPU so it can perform its reset sequence in
    parallel up to the kernel entry vector gate.

  * Migrate all interrupts in the GIC targeting the outbound CPU
    interface to the inbound CPU interface, including SGIs. This is
    performed by gic_migrate_target() in drivers/irqchip/irq-gic.c.

  * Call cpu_pm_enter() which takes care of flushing the VFP state to
    RAM and save the CPU interface config from the GIC to RAM.

  * Modify the cpu_logical_map to refer to the inbound physical CPU.

  * Call cpu_suspend() which saves the CPU state (general purpose
    registers, page table address) onto the stack and store the
    resulting stack pointer in an array indexed by the updated
    cpu_logical_map, then call the provided shutdown function.
    This happens in arch/arm/kernel/sleep.S.

At this point, the provided shutdown function executed by the outbound
CPU ungates the inbound CPU. Therefore the inbound CPU:

  * Picks up the saved stack pointer in the array indexed by its MPIDR
    in arch/arm/kernel/sleep.S.

  * The MMU and caches are re-enabled using the saved state on the
    provided stack, just like if this was a resume operation from a
    suspended state.

  * Then cpu_suspend() returns, although this is on the inbound CPU
    rather than the outbound CPU which called it initially.

  * The function cpu_pm_exit() is called which effect is to restore the
    CPU interface state in the GIC using the state previously saved by
    the outbound CPU.

  * Exit of bL_switch_to() to resume normal kernel execution on the
    new CPU.

However, the outbound CPU is potentially still running in parallel while
the inbound CPU is resuming normal kernel execution, hence we need
per CPU stack isolation to execute bL_do_switch().  After the outbound
CPU has ungated the inbound CPU, it calls mcpm_cpu_power_down() to:

  * Clean its L1 cache.

  * If it is the last CPU still alive in its cluster (last man standing),
    it also cleans its L2 cache and disables cache snooping from the other
    cluster.

  * Power down the CPU (or whole cluster).

Code called from bL_do_switch() might end up referencing 'current' for
some reasons.  However, 'current' is derived from the stack pointer.
With any arbitrary stack, the returned value for 'current' and any
dereferenced values through it are just random garbage which may lead to
segmentation faults.

The active page table during the execution of bL_do_switch() is also a
problem.  There is no guarantee that the inbound CPU won't destroy the
corresponding task which would free the attached page table while the
outbound CPU is still running and relying on it.

To solve both issues, we borrow some of the task space belonging to
the init/idle task which, by its nature, is lightly used and therefore
is unlikely to clash with our usage.  The init task is also never going
away.

Right now the logical CPU number is assumed to be equivalent to the
physical CPU number within each cluster. The kernel should also be
booted with only one cluster active.  These limitations will be lifted
eventually.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
2013-07-30 09:02:13 -04:00
Matt Porter 3ad7a42d5a ARM: davinci: move private EDMA API to arm/common
Move mach-davinci/dma.c to common/edma.c so it can be used
by OMAP (specifically AM33xx) as well.

Signed-off-by: Matt Porter <mporter@ti.com>
Acked-by: Chris Ball <cjb@laptop.org> # davinci_mmc.c
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Olof Johansson <olof@lixom.net>
[nsekhar@ti.com: dropped davinci sffsdr changes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-06-18 10:52:03 +05:30
Linus Torvalds e3d98847de ARM: platform specific firmware interfaces for 3.10
Two platforms, bcm and exynos have their own firmware interfaces using
 the "secure monitor call", this adds support for those.
 
 We had originally planned to have a third set of patches in here, which
 would extend support for the existing generic "psci" call that is used
 on multiple platforms as well as Xen and KVM guests, but that ended up
 getting dropped because the patches were not ready in time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRhKXyAAoJEIwa5zzehBx3hVQP/1dOFA/LDDKAV918vutKlCtC
 Rptv8WOjMA/r5vlbTKmUHi3tMDDXdDH6CaWH5Fd4pDAnWqWQ8lCB0lSsOY0sKo7c
 SPujwUV6i5LyF2AM+gqTOUrK/6nZNuDYJL9xVjQTOMMNFnTckI4DsgrWAFsv07hh
 N8kh5iR2fD13tg3c/xmuqQ0JECyot1xZowif3dPi/QywsPlxUAua86XI3rWujN8w
 VSARDdpDj6l/6VHYjqiBaGG3sPvzG/dcsN03lTjI5dah4MNtKU4U4Qy7M83ebRXd
 4+gKqy1T0H+lfAODtZqvnkJdJHhZ73f2dUiZj0eWQg9RxNJoLx/tQKmr9fUp4ypP
 fKv0/z5aFEymAPa0FqUvU+zG57WUBjyOrEUie5XoPq4k+Z0xWHmJ8YeDRaqhBC2j
 YcHuSFAhSimqw8Lrc720qvovLvsy4gU8Y6HVIPek0v/D7svvB6smhry2P3XPjXbM
 nEldmqljONMOXJFfgav5Jp6r41IGJOBzwlPlqmNT7+QYo9BLxPVrnroKVUhvx4da
 gjx0Uo8PJZC8wH2WUiP8v/X6yYk7ZzdYgY0oJseeW8TqT8RxkpIScgwRKeufJW0m
 WHcYoJWrFRPv4iHUNBaFfDLk86NaDVFhjJaUKWGbHLJPG/wGEsT6xoMkl7oI0uH5
 bI8xCHEsSqz8GiRW+j22
 =68m5
 -----END PGP SIGNATURE-----

Merge tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM platform specific firmware interfaces from Olof Johansson:
 "Two platforms, bcm and exynos have their own firmware interfaces using
  the "secure monitor call", this adds support for those.

  We had originally planned to have a third set of patches in here,
  which would extend support for the existing generic "psci" call that
  is used on multiple platforms as well as Xen and KVM guests, but that
  ended up getting dropped because the patches were not ready in time."

* tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm: mark bcm_kona_smc_init as __init
  ARM: bcm281xx: Add DT support for SMC handler
  ARM: bcm281xx: Add L2 cache enable code
  ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
  ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
  ARM: EXYNOS: Add support for Exynos secure firmware
  ARM: EXYNOS: Add support for secure monitor calls
  ARM: Add interface for registering and calling firmware-specific operations
2013-05-04 12:33:36 -07:00
Dave Martin 70100a0226 ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels
The full mcpm layer is not likely to be relevant to v6 based
platforms, so a multiplatform kernel won't use that code if booted
on v6 hardware.

This patch modifies the AFLAGS for affected mcpm .S files to
specify armv7-a explicitly for that code.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-02 12:14:34 +01:00
Nicolas Pitre 9ff221bad8 ARM: mcpm: generic SMP secondary bringup and hotplug support
Now that the cluster power API is in place, we can use it for SMP secondary
bringup and CPU hotplug in a generic fashion.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24 10:37:02 -04:00
Dave Martin 1ae98561b1 ARM: mcpm_head.S: vlock-based first man election
Instead of requiring the first man to be elected in advance (which
can be suboptimal in some situations), this patch uses a per-
cluster mutex to co-ordinate selection of the first man.

This should also make it more feasible to reuse this code path for
asynchronous cluster resume (as in CPUidle scenarios).

We must ensure that the vlock data doesn't share a cacheline with
anything else, or dirty cache eviction could corrupt it.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24 10:37:01 -04:00
Nicolas Pitre e8db288e05 ARM: multi-cluster PM: secondary kernel entry code
CPUs in cluster based systems, such as big.LITTLE, have special needs
when entering the kernel due to a hotplug event, or when resuming from
a deep sleep mode.

This is vectorized so multiple CPUs can enter the kernel in parallel
without serialization.

The mcpm prefix stands for "multi cluster power management", however
this is usable on single cluster systems as well.  Only the basic
structure is introduced here.  This will be extended with later patches.

In order not to complexify things more than they currently have to,
the planned work to make runtime adjusted MPIDR based indexing and
dynamic memory allocation for cluster states is postponed to a later
cycle. The MAX_NR_CLUSTERS and MAX_CPUS_PER_CLUSTER static definitions
should be sufficient for those systems expected to be available in the
near future.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
2013-04-24 10:36:59 -04:00
Tomasz Figa 7366b92a77 ARM: Add interface for registering and calling firmware-specific operations
Some boards are running with secure firmware running in TrustZone secure
world, which changes the way some things have to be initialized.

This patch adds an interface for platforms to specify available firmware
operations and call them.

A wrapper macro, call_firmware_op(), checks if the operation is provided
and calls it if so, otherwise returns -ENOSYS to allow fallback to
legacy operation..

By default no operations are provided.

Example of use:

In code using firmware ops:

  __raw_writel(virt_to_phys(exynos4_secondary_startup),
               CPU1_BOOT_REG);

  /* Call Exynos specific smc call */
  if (call_firmware_op(cpu_boot, cpu) == -ENOSYS)
          cpu_boot_legacy(...); /* Try legacy way */

  gic_raise_softirq(cpumask_of(cpu), 1);

In board-/platform-specific code:

  static int platformX_do_idle(void)
  {
          /* tell platformX firmware to enter idle */
          return 0;
  }

  static int platformX_cpu_boot(int i)
  {
          /* tell platformX firmware to boot CPU i */
          return 0;
  }

  static const struct firmware_ops platformX_firmware_ops = {
          .do_idle      = exynos_do_idle,
          .cpu_boot     = exynos_cpu_boot,
          /* other operations not available on platformX */
  };

  static void __init board_init_early(void)
  {
          register_firmware_ops(&platformX_firmware_ops);
  }

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-09 01:52:06 +09:00
Rob Herring 44430ec068 irqchip: Move ARM VIC to drivers/irqchip
Now that we have drivers/irqchip, move VIC irqchip to drivers/irqchip.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-12 10:52:14 -06:00
Rob Herring 81243e444c irqchip: Move ARM GIC to drivers/irqchip
Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This
is necessary to share the GIC with arm and arm64.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-01-12 10:47:31 -06:00
Rob Herring c65f2abf54 ARM: remove ixp23xx and ixp2000 platforms
ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2012-04-06 08:26:18 -05:00
Linus Torvalds ef08e78268 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...
2012-03-29 15:34:57 -07:00
Russell King a1be5d6496 ARM: riscpc: move time-acorn.c to mach-rpc
Nothing but RiscPC makes use of the Acorn timekeeping code, so move
it into mach-rpc.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-24 09:37:30 +00:00
Boojin Kim b7d861d939 DMA: PL330: Merge PL330 driver into drivers/dma/
Currently there were two part of DMAC PL330 driver for
support old styled s3c-pl330 which has been merged into
drivers/dma/pl330.c driver. Actually, there is no reason
to separate them now.

Basically this patch merges arch/arm/common/pl330.c into
drivers/dma/pl330.c driver and removes useless exported
symbol, externed function and so on.

The newer pl330 driver tested on SMDKV310 and SMDK4212 boards

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-08 17:59:28 +05:30
Justin P. Mattock aec995900f ARM: 6872/1: arch:common:Makefile Remove unused config in the Makefile.
The patch below removes an unused config variable found by using a kernel
cleanup script.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-04-10 21:13:37 +01:00
Rob Herring 8a9618f5df ARM: 6432/1: move timer-sp.c from versatile to common
From: Rob Herring <rob.herring@smooth-stone.com>

The timer-sp h/w used on versatile platforms can also be used for other
platforms, so move it to a common location.

Signed-off-by: Rob Herring <rob.herring@smooth-stone.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-04 15:49:32 +00:00
Russell King c39e52a793 Merge branches 'at91', 'bcmring', 'ep93xx', 'iop', 'misc', 'nomadik', 'omap', 'pxa', 'spear' and 'versatile' into devel
Conflicts:
	arch/arm/Makefile
	arch/arm/common/Makefile
	arch/arm/mm/Kconfig
2010-05-17 11:53:39 +01:00
Jassi Brar 75070612c4 ARM: 6132/1: PL330: Add common core driver
PL330 is a configurable DMA controller PrimeCell device.
The register map of the device is well defined.
The configuration of a particular implementation can be
read from the six configuration registers CR0-4,Dn.

This patch implements a driver for the specification:-
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0424a/DDI0424A_dmac_pl330_r0p0_trm.pdf

The exported interface should be sufficient to implement
a driver for any DMA API.

Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15 15:03:50 +01:00
Russell King c5a0adb510 ARM: ICST: kill duplicate icst code
The only difference between ICST307 and ICST525 are the two arrays
for calculating the S parameter; the code is now identical.  Merge
the two files and kill the duplicated code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:33 +01:00
Dmitry Eremin-Solenikov 78731d33c1 [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
collie_pm was the only non-PXA user of sharpsl_pm. Now as it's gone we
can merge code into one single file to allow further cleanup.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-11 22:20:22 +08:00
Russell King 0318e693d3 [ARM] clkdev: add generic clkdev infrastructure
Add some generic infrastructure to assist looking up struct clks
for the ARM architecture.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27 12:38:21 +00:00
Russell King bedd78ca78 [RTC] remove old ARM rtc library code
Now that all drivers using it are gone, remove the old ARM RTC library.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-22 14:56:41 +01:00
Mike Rapoport a8fc078955 [ARM] 4577/1: ITE 8152 PCI bridge support
This patch provides driver for ITE 8152 PCI bridge.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15 18:53:59 +01:00
Lennert Buytenhek 8b76a68c6c [ARM] 3620/2: ixp23xx: add uengine loader support
Patch from Lennert Buytenhek

This patch allows the ixp2000 uengine loader that is already in the
tree to also be used on the ixp23xx.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:30:56 +01:00
Lennert Buytenhek 18ec5c7312 [ARM] 3373/1: move uengine loader to arch/arm/common
Patch from Lennert Buytenhek

Move the uengine loader from arch/arm/mach-ixp2000 to arch/arm/common
so that ixp23xx can use it too.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21 22:06:16 +00:00
Russell King fa0fe48fcc [ARM] Separate VIC (vectored interrupt controller) support from Versatile
Other machines may wish to make use of the VIC support code, so
move it to arch/arm/common.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13 21:30:48 +00:00
Russell King de1d815fcc [ARM] Move AMBA bus code to drivers/amba/
Make the AMBA bus code visible to other architectures.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 14:54:15 +00:00
Richard Purdie b7557de41a [ARM] 3228/1: SharpSL: Move PM code to arch/arm/common
Patch from Richard Purdie

This patch moves a large chunk of the sharpsl_pm driver to
arch/arm/common so that it can be reused on other devices such as the
SL-5500 (collie). It also abstracts some functions from the core into
the machine and platform specific parts of the driver to aid reuse.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 20:44:55 +00:00
Russell King f27ecacc54 [ARM] Add support for ARM GIC
Add support for the ARM Generic Interrupt Controller.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 21:31:00 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00