Commit Graph

3520 Commits

Author SHA1 Message Date
Linus Torvalds 79703e014b chrome platform changes for 5.6
* CrOS EC
 - Refactoring of some of cros_ec's headers. include/linux/mfd/cros_ec.h now
   removed, new cros_ec.h added drivers/platform/chrome which contains shared
   operations of cros_ec transport drivers.
 - Response tracing in cros_ec_proto
 
 * Wilco EC
 - Fix unregistration order.
 - Fix keyboard backlight probing on systems without keyboard backlight
 - Minor cleanup (newlines in printks, COMPILE_TEST)
 
 * Misc
 - chromeos_laptop converted to use i2c_new_scanned_device instead of
   i2c_new_probed_device
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXjij4AAKCRBzbaomhzOw
 wrFjAP0bU5PFkxprCOTY9kF/cMgHPDljEPES4FVV11eGyYr3HgD/StpuIhFGrh7+
 Fz96dDdNu1melyGjmMqSN/M9JFo+Hw4=
 =FB/I
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:
 "CrOS EC:

   - Refactoring of some of cros_ec's headers:

     include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to
     drivers/platform/chrome which contains shared operations of cros_ec
     transport drivers.

   - Response tracing in cros_ec_proto

  Wilco EC:

   - Fix unregistration order.

   - Fix keyboard backlight probing on systems without keyboard
     backlight

   - Minor cleanup (newlines in printks, COMPILE_TEST)

  Misc:

   - chromeos_laptop converted to use i2c_new_scanned_device instead of
     i2c_new_probed_device"

* tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec: Match implementation with headers
  platform/chrome: cros_ec: Drop unaligned.h include
  platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST
  platform/chrome: wilco_ec: Add newlines to printks
  platform/chrome: wilco_ec: Fix unregistration order
  cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
  platform/chrome: cros_ec_ishtp: Make init_lock static
  platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device
  platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs
  platform/chrome: cros_ec_proto: Add response tracing
  platform/chrome: cros_ec_trace: Match trace commands with EC commands
2020-02-04 07:17:41 +00:00
Linus Torvalds eadc4e40e6 RTC for 5.6
Subsystem:
  - the VL_READ and VL_CLR ioctls are now documented and their behavior is
    unified across all the drivers.
  - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both REGMAP_I2C and
    REGMAP_SPI unecessarily.
 
 Drivers:
  - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and sama5d2
    compatibles.
  - cmos: solve lost interrupts issue on MS Surface 3
  - hym8563: return proper errno when time is invalid
  - rv3029: many fixes, nvram support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl44lxsACgkQ2wIijOdR
 NOVF3BAAlQVFDklLqkS6MJplgZ06lgv4ZIbfxCHYFJPUNt/X/gTcHS1OSTwctmor
 3qQamySGc74/GAI6lmNSSzDUz9vi2hwcwvLtR/e6+Kgdhg9EuWWvgsqKYRGAn573
 TzHWsYY8bDpZ/mN5K+qqadGlzsP58gsEaw0fzcsPkZQQdq4mNSIrB5RILvsHX8cN
 +RviYOqR+ZvAegfQrAfb/9SCwxQAstUqRDaZXodQDEeIk5CEDWyr31+U9eLDdYoN
 1FOHYp6uwUy6Vnl0ym7WU42L95tVWx9XOc/PEq8dZ1m09nfrMhqeIoQC8SUtxG9+
 FWXN87lkLSlDaLUwVE8T22QII6jP+7Lc2t6SbI4fwwJdNDoPg+5hhabGjQbM2We9
 nG1x7TsVwKjeUglfhqeVgGWYzmIhAeOEBXQhqCdtfVi13ocecVFJxOG6oolQGtlZ
 M+/t91hID6il7/nxGembcHKapMf9c41CXBPesEg0QjkvGvKj1Z8L9a5vYigzbxWW
 zb8m9cjIhY3bb8mns3aCs773PSXavsycLk1Hupw6RWrN1XnEXVMHQZDtvzCJe7EV
 8CY40LI0VN6x5HC/d0EnqyrMvQbkgTBPXjLBhj54edCZM3vAny3xkYc03oDU8cKc
 0PbLUXKpFmzFbTQB4w0sE2FgT0uZmL2SCXiFemUwxbl+/ZACkoc=
 =e1Xr
 -----END PGP SIGNATURE-----

Merge tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "The VL_READ and VL_CLR ioctls have been reworked to be more useful.
  This will not break userspace as there are very few users and they are
  using the integer value as a boolean.

  Apart from that, two drivers were reworked and a few fixes here and
  there for a net reduction of number of lines.

  Summary:

  Subsystem:
   - the VL_READ and VL_CLR ioctls are now documented and their behavior
     is unified across all the drivers.
   - RTC_I2C_AND_SPI Kconfig option rework to avoid selecting both
     REGMAP_I2C and REGMAP_SPI unecessarily.

  Drivers:
   - at91rm9200: remove deprecated procfs, add sam9x60, sama5d4 and
     sama5d2 compatibles.
   - cmos: solve lost interrupts issue on MS Surface 3
   - hym8563: return proper errno when time is invalid
   - rv3029: many fixes, nvram support"

* tag 'rtc-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (63 commits)
  dt-bindings: rtc: at91rm9200: document clocks property
  rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
  rtc: Kconfig: select REGMAP_I2C when necessary
  rtc: Kconfig: properly indent sd3078 entry
  rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
  rtc: cmos: Use predefined value for RTC IRQ on legacy x86
  rtc: cmos: Stop using shared IRQ
  rtc: tps6586x: Use IRQ_NOAUTOEN flag
  rtc: at91rm9200: use FIELD_PREP/FIELD_GET
  rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
  rtc: at91rm9200: move register definitions to C file
  rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
  dt-bindings: rtc: at91rm9200: convert bindings to json-schema
  rtc: at91rm9200: remove procfs information
  dt-bindings: atmel, at91rm9200-rtc: add microchip, sam9x60-rtc
  rtc: pcf8563: Use BIT
  rtc: moxart: Convert to SPDX identifier
  rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
  rtc: rx8025: Remove struct i2c_client from struct rx8025_data
  rtc: hym8563: Read the valid flag directly instead of caching it
  ...
2020-02-04 07:03:40 +00:00
Linus Torvalds af32f3a414 - New Drivers
- Add support for ROHM BD71828 PMICs and GPIOs
    - Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341
 
 - New Device Support
    - Add support for BD71828 to BD70528 RTC driver
    - Add support for Intel's Jasper Lake to LPSS PCI
 
  - New Functionality
    - Add support for Power Key to ROHM BD71828
    - Add support for Clocks to ROHM BD71828
    - Add support for GPIOs to Dialog DA9062
    - Add support for USB PD Notify to ChromiumOS EC
    - Allow callers to specify args when requesting regmap lookup; syscon
 
  - Fix-ups
    - Improve error handling and sanity checking; atmel-hlcdc, dln2
    - Device Tree support/documentation; bd71828, da9062, xylon,logicvc,
                                         ab8500, max14577, atmel-usart
    - Match devices using platform IDs; bd7xxxx
    - Refactor BD718x7 regulator component; bd718x7-regulator
    - Use standard interfaces/helpers; syscon, sm501
    - Trivial (whitespace, spelling, etc); ab8500-core, Kconfig
    - Remove unused code; db8500-prcmu, tqmx86
    - Wait until boot has finished before accessing registers; madera-core
    - Provide missing register value defaults; cs47l15-tables
    - Allow more time for hardware to reset; madera-core
 
  - Bug Fixes
    - Fix erroneous register values; rohm-bd70528
    - Fix register volatility; axp20x, rn5t618
    - Fix Kconfig dependencies; MFD_MAX77650
    - Fix incorrect compatible string; da9062-core
    - Fix syscon_regmap_lookup_by_phandle_args() stub; syscon
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl44Ga0ACgkQUa+KL4f8
 d2HRJg//VdigHgOTX/eJggI67n36kTgho+VzwRwLuSedDBFIkh5S8NWO7bFyf1Y4
 Qn+MybJtCvPQeUVmqO6cUi0/VqXgwW4mUe5L6oQKIsPYzfmhuc/XF+DA2S8ulOBj
 CckAM15i4WARCtNtFH12EaGGekLPAkik9nZE5EH7vS89TUxLMKbir72U+qFju6mu
 o2F8B7QbDe2jxaooxZ11zPjECwJfzgdXe+FipmogL1itLT+1phpirlttY4R5/4LV
 t3jKb3GI5xN+YWqyXHFF1EKtQEHTkYyKcby2It+8ksYAKiueY0hAuX7+pt1KXWjb
 ReM/hYH5dqjJSz6MjajrInHlpAf8iqtzNdXznSm/hQ9X+YHpaqmdYBt9bTg3pbR/
 z5F0q32e716K/XcJIv2igizT2EZDZIb2AG9oh0D93Z10tPgTpp0CTkcSsSw4CpnP
 MM60B2RN6RI/1MVK1eWRfWVSLbopsForetlnwXhTxY0Zr/7Hd+l+2ndz8IJE+vya
 86jq9yXv7kndwcKNIuUy5jIE2XV9JIbjwwDd4a8tbQgOMkSWHuV3pN+qnT6+/kRh
 TS/LFI49rjJauB85XdqhZc2+i0Eo78ctIdxQebKNZe6wz+r5Y5NTMMCZ5TjScxJX
 aSKRepOEtSbnKloUi5HZ71zfX/waTxzgyodkF7UJk3eEtzlDF8o=
 =t4+B
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for ROHM BD71828 PMICs and GPIOs
   - Add support for Qualcomm Aqstic Audio Codecs WCD9340 and WCD9341

  New Device Support:
   - Add support for BD71828 to BD70528 RTC driver
   - Add support for Intel's Jasper Lake to LPSS PCI

  New Functionality:
   - Add support for Power Key to ROHM BD71828
   - Add support for Clocks to ROHM BD71828
   - Add support for GPIOs to Dialog DA9062
   - Add support for USB PD Notify to ChromiumOS EC
   - Allow callers to specify args when requesting regmap lookup; syscon

  Fix-ups:
   - Improve error handling and sanity checking; atmel-hlcdc, dln2
   - Device Tree support/documentation; bd71828, da9062, xylon,logicvc,
     ab8500, max14577, atmel-usart
   - Match devices using platform IDs; bd7xxxx
   - Refactor BD718x7 regulator component; bd718x7-regulator
   - Use standard interfaces/helpers; syscon, sm501
   - Trivial (whitespace, spelling, etc); ab8500-core, Kconfig
   - Remove unused code; db8500-prcmu, tqmx86
   - Wait until boot has finished before accessing registers;
     madera-core
   - Provide missing register value defaults; cs47l15-tables
   - Allow more time for hardware to reset; madera-core

  Bug Fixes:
   - Fix erroneous register values; rohm-bd70528
   - Fix register volatility; axp20x, rn5t618
   - Fix Kconfig dependencies; MFD_MAX77650
   - Fix incorrect compatible string; da9062-core
   - Fix syscon_regmap_lookup_by_phandle_args() stub; syscon"

* tag 'mfd-next-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
  mfd: syscon: Fix syscon_regmap_lookup_by_phandle_args() dummy
  mfd: wcd934x: Add support to wcd9340/wcd9341 codec
  mfd: syscon: Add arguments support for syscon reference
  mfd: rn5t618: Mark ADC control register volatile
  dt-bindings: atmel-usart: Add microchip,sam9x60-{usart, dbgu}
  dt-bindings: atmel-usart: Remove wildcard
  mfd: cros_ec: Add cros-usbpd-notify subdevice
  mfd: da9062: Fix watchdog compatible string
  mfd: madera: Allow more time for hardware reset
  mfd: cs47l15: Add missing register default
  mfd: madera: Wait for boot done before accessing any other registers
  mfd: Kconfig: Rename Samsung to lowercase
  mfd: tqmx86: remove set but not used variable 'i2c_ien'
  mfd: dbx500-prcmu: Drop DSI pll clock functions
  mfd: dbx500-prcmu: Drop set_display_clocks()
  mfd: max77650: Select REGMAP_IRQ in Kconfig
  mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile
  mfd: ab8500: Fix ab8500-clk typo
  mfd: intel-lpss: Add Intel Jasper Lake PCI IDs
  dt-bindings: mfd: max14577: Add reference to max14040_battery.txt descriptions
  ...
2020-02-03 14:51:57 +00:00
Linus Torvalds c5951e7c8e The main MIPS changes for 5.6:
- Support mremap() for the VDSO, primarily to allow CRIU to restore the
   VDSO to its checkpointed location.
 
 - Restore the MIPS32 cBPF JIT, after having reverted the enablement of
   the eBPF JIT for MIPS32 systems in the 5.5 cycle.
 
 - Improve cop0 counter synchronization behaviour whilst onlining CPUs by
   running with interrupts disabled.
 
 - Better match FPU behaviour when emulating multiply-accumulate
   instructions on pre-r6 systems that implement IEEE754-2008 style MACs.
 
 - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to
   take advantage of instructions introduced by r2.
 
 - Support for the Ingenic X1000 SoC & the really nice little CU Neo
   development board that's using it.
 
 - Support for WMAC on GARDENA Smart Gateway devices.
 
 - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
   preparation for introducing IP35 (Origin 3*) support.
 
 - Various Kconfig & Makefile cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXjRnpxYccGF1bGJ1cnRv
 bkBrZXJuZWwub3JnAAoJED6nn6y1dQDdNYoA/3ZhgKX1L/hwvkPKwu7FxbL41pjB
 WAm8IYDaxPvgxkcSAP9FNNepHK+oBPM8I2e3DvDvmcuYjumztdikzYbJ5HuMBA==
 =MV2S
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS changes from Paul Burton:
 "Nothing too big or scary in here:

   - Support mremap() for the VDSO, primarily to allow CRIU to restore
     the VDSO to its checkpointed location.

   - Restore the MIPS32 cBPF JIT, after having reverted the enablement
     of the eBPF JIT for MIPS32 systems in the 5.5 cycle.

   - Improve cop0 counter synchronization behaviour whilst onlining CPUs
     by running with interrupts disabled.

   - Better match FPU behaviour when emulating multiply-accumulate
     instructions on pre-r6 systems that implement IEEE754-2008 style
     MACs.

   - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them
     to take advantage of instructions introduced by r2.

   - Support for the Ingenic X1000 SoC & the really nice little CU Neo
     development board that's using it.

   - Support for WMAC on GARDENA Smart Gateway devices.

   - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
     preparation for introducing IP35 (Origin 3*) support.

   - Various Kconfig & Makefile cleanups"

* tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits)
  MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel
  MIPS: Loongson64: Disable exec hazard
  MIPS: Loongson64: Bump ISA level to MIPSR2
  MIPS: Make DIEI support as a config option
  MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too"
  MIPS: asm: local: add barriers for Loongson
  MIPS: Loongson64: Select mac2008 only feature
  MIPS: Add MAC2008 Support
  Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel"
  MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again)
  MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
  MIPS: generic: don't unconditionally select PINCTRL
  MIPS: don't explicitly select LIBFDT in Kconfig
  MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts
  MIPS: SGI-IP30: Check for valid pointer before using it
  MIPS: syscalls: fix indentation of the 'SYSNR' message
  MIPS: boot: fix typo in 'vmlinux.lzma.its' target
  MIPS: fix indentation of the 'RELOCS' message
  dt-bindings: Document loongson vendor-prefix
  MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi.
  ...
2020-01-31 11:28:31 -08:00
Geert Uytterhoeven 34719de919 rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
Merely enabling I2C and RTC selects REGMAP_I2C and REGMAP_SPI, even when
no driver needs it.  While the former can be moduler, the latter cannot,
and thus becomes built-in.

Fix this by moving the select statements for REGMAP_I2C and REGMAP_SPI
from the RTC_I2C_AND_SPI helper to the individual drivers that depend on
it.

Note that the comment for RTC_I2C_AND_SPI refers to SND_SOC_I2C_AND_SPI
for more information, but the latter does not select REGMAP_{I2C,SPI}
itself, and defers that to the individual drivers, too.

Fixes: 080481f54e ("rtc: merge ds3232 and ds3234")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200112171349.22268-1-geert@linux-m68k.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-27 23:36:35 +01:00
Alexandre Belloni 578c2b661e rtc: Kconfig: select REGMAP_I2C when necessary
Some i2c RTC drivers are using regmap but are not selecting REGMAP_I2C
which may lead to build failures.

Link: https://lore.kernel.org/r/20200127221724.10160-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-27 23:36:19 +01:00
Alexandre Belloni c682094107 rtc: Kconfig: properly indent sd3078 entry
The RTC_DRV_SD3078 is indented using spaces, use tabs instead.

Link: https://lore.kernel.org/r/20200127221724.10160-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-27 23:36:17 +01:00
Linus Torvalds 6a1000bd27 ioremap changes for 5.6
- remove ioremap_nocache given that is is equivalent to
    ioremap everywhere
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl4vKHwLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMPGBAAuVNUZaZfWYHpiVP2oRcUQUguFiD3NTbknsyzV2oH
 J9P0GfeENSKwE9OOhZ7XIjnCZAJwQgTK/ppQY5yiQ/KAtYyyXjXEJ6jqqjiTDInr
 +3+I3t/LhkgrK7tMrb7ylTGa/d7KhaciljnOXC8+b75iddvM9I1z2pbHDbppZMS9
 wT4RXL/cFtRb85AfOyPLybcka3f5P2gGvQz38qyimhJYEzHDXZu9VO1Bd20f8+Xf
 eLBKX0o6yWMhcaPLma8tm0M0zaXHEfLHUKLSOkiOk+eHTWBZ3b/w5nsOQZYZ7uQp
 25yaClbameAn7k5dHajduLGEJv//ZjLRWcN3HJWJ5vzO111aHhswpE7JgTZJSVWI
 ggCVkytD3ESXapvswmACSeCIDMmiJMzvn6JvwuSMVB7a6e5mcqTuGo/FN+DrBF/R
 IP+/gY/T7zIIOaljhQVkiEIIwiD/akYo0V9fheHTBnqcKEDTHV4WjKbeF6aCwcO+
 b8inHyXZSKSMG//UlDuN84/KH/o1l62oKaB1uDIYrrL8JVyjAxctWt3GOt5KgSFq
 wVz1lMw4kIvWtC/Sy2H4oB+RtODLp6yJDqmvmPkeJwKDUcd/1JKf0KsZ8j3FpGei
 /rEkBEss0KBKyFAgBSRO2jIpdj2epgcBcsdB/r5mlhcn8L77AS6mHbA173kY4pQ/
 Kdg=
 =TUCJ
 -----END PGP SIGNATURE-----

Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap

Pull ioremap updates from Christoph Hellwig:
 "Remove the ioremap_nocache API (plus wrappers) that are always
  identical to ioremap"

* tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap:
  remove ioremap_nocache and devm_ioremap_nocache
  MIPS: define ioremap_nocache to ioremap
2020-01-27 13:03:00 -08:00
Andy Shevchenko 604c521259 rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper
Refactor code by using the new dmi_get_bios_year() helper instead of
open coding its functionality. This also makes logic slightly clearer.

No changes intended.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200123131437.28157-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-25 21:55:14 +01:00
Andy Shevchenko 5848ad2f1b rtc: cmos: Use predefined value for RTC IRQ on legacy x86
When legacy devices are present on x86 machine, the RTC IRQ has
a dedicated pre-defined value. Use it instead of hard coded number.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200123131437.28157-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-25 21:55:12 +01:00
Andy Shevchenko b6da197a2e rtc: cmos: Stop using shared IRQ
As reported by Guilherme G. Piccoli:

---8<---8<---8<---

The rtc-cmos interrupt setting was changed in the commit 079062b28f
("rtc: cmos: prevent kernel warning on IRQ flags mismatch") in order
to allow shared interrupts; according to that commit's description,
some machine got kernel warnings due to the interrupt line being shared
between rtc-cmos and other hardware, and rtc-cmos didn't allow IRQ sharing
that time.

After the aforementioned commit though it was observed a huge increase
in lost HPET interrupts in some systems, observed through the following
kernel message:

[...] hpet1: lost 35 rtc interrupts

After investigation, it was narrowed down to the shared interrupts
usage when having the kernel option "irqpoll" enabled. In this case,
all IRQ handlers are called for non-timer interrupts, if such handlers
are setup in shared IRQ lines. The rtc-cmos IRQ handler could be set to
hpet_rtc_interrupt(), which will produce the kernel "lost interrupts"
message after doing work - lots of readl/writel to HPET registers, which
are known to be slow.

Although "irqpoll" is not a default kernel option, it's used in some contexts,
one being the kdump kernel (which is an already "impaired" kernel usually
running with 1 CPU available), so the performance burden could be considerable.
Also, the same issue would happen (in a shorter extent though) when using
"irqfixup" kernel option.

In a quick experiment, a virtual machine with uptime of 2 minutes produced
>300 calls to hpet_rtc_interrupt() when "irqpoll" was set, whereas without
sharing interrupts this number reduced to 1 interrupt. Machines with more
hardware than a VM should generate even more unnecessary HPET interrupts
in this scenario.

---8<---8<---8<---

After looking into the rtc-cmos driver history and DSDT table from
the Microsoft Surface 3, we may notice that Hans de Goede submitted
a correct fix (see dependency below). Thus, we simply revert
the culprit commit.

Fixes: 079062b28f ("rtc: cmos: prevent kernel warning on IRQ flags mismatch")
Depends-on: a1e23a42f1 ("rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs")
Reported-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200123131437.28157-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-25 21:54:57 +01:00
Dmitry Osipenko 4c4ab451ae rtc: tps6586x: Use IRQ_NOAUTOEN flag
The IRQ_NOAUTOEN flag tells interrupt core that interrupt shall not be
auto-enabled at the time of requesting interrupt. This is a minor clean-up
change that doesn't fix any problems.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200106015615.12602-1-digetx@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-25 21:50:18 +01:00
Matti Vaittinen fe5a591b78 rtc: bd70528: add BD71828 support
ROHM BD71828 PMIC RTC block is from many parts similar to one
on BD70528. Support BD71828 RTC using BD70528 RTC driver and
avoid re-inventing the wheel.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-01-24 07:23:06 +00:00
Alexandre Belloni 3c7b90cb14 rtc: at91rm9200: use FIELD_PREP/FIELD_GET
Use FIELD_PREP and FIELD_GET instead of hardcoding already defined values.

Link: https://lore.kernel.org/r/20191229204421.337612-6-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15 15:11:10 +01:00
Alexandre Belloni 565205d5ad rtc: at91rm9200: avoid time readout in at91_rtc_setalarm
The current rtc time is read out in at91_rtc_setalarm but it it immediately
overwritten by the alarm time. Remove the readout.

Link: https://lore.kernel.org/r/20191229204421.337612-5-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15 15:11:08 +01:00
Alexandre Belloni a1243b099e rtc: at91rm9200: move register definitions to C file
The header was simply moved from the arm mach folder to drivers/rtc but
there is not point in having it separated from the driver.

Also remove unused bit definitions and use BIT and GENMASK.

Link: https://lore.kernel.org/r/20191229204421.337612-4-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15 15:11:07 +01:00
Alexandre Belloni ca3fdc989c rtc: at91rm9200: add sama5d4 and sama5d2 compatibles
Both the sama5d4 and sama5d2 RTCs have more features than the previous
RTCs, add a compatible string for them.

Link: https://lore.kernel.org/r/20191229204421.337612-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15 12:13:54 +01:00
Alexandre Belloni b7052876d7 rtc: at91rm9200: remove procfs information
The RTC procfs interface is deprecated and hasn't been used by userspace
for years.

Link: https://lore.kernel.org/r/20191229204421.337612-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-15 12:10:05 +01:00
Thomas Bogendoerfer 10cf8300ec
MIPS: SGI-IP27: fix readb/writeb addressing
Our chosen byte swapping, which is what firmware already uses, is to
do readl/writel by normal lw/sw intructions (data invariance). This
also means we need to mangle addresses for u8 and u16 accesses. The
mangling for 16bit has been done aready, but 8bit one was missing.
Correcting this causes different addresses for accesses to the
SuperIO and local bus of the IOC3 chip. This is fixed by changing
byte order in ioc3 and m48rtc_rtc structs.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
2020-01-09 15:30:56 -08:00
Enric Balletbo i Serra 11f1eabee0 cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h'
This header file now only includes the cros_ec_dev struct, however, is the
'include/linux/platform_data/cros_ec_proto.h' who contains the definition of
all the Chrome OS EC related structs. There is no reason to have a
separate include for this struct so move to the place where other
structs are defined. That way, we can remove the include itself, but also
simplify the common pattern

    #include <linux/mfd/cros_ec.h>
    #include <linux/platform_data/cros_ec_proto.h>

for a single include

    #include <linux/platform_data/cros_ec_proto.h>

The changes to remove the cros_ec.h include were generated with the
following shell script:

    git grep -l "<linux/mfd/cros_ec.h>" | xargs sed -i '/<linux\/mfd\/cros_ec.h>/d'

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2020-01-07 17:36:46 +01:00
Christoph Hellwig 4bdc0d676a remove ioremap_nocache and devm_ioremap_nocache
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-06 09:45:59 +01:00
Alexandre Belloni f01f4ffdfb rtc: cmos: Revert "rtc: Fix the AltCentury value on AMD/Hygon platform"
There are multiple reports of this patch breaking RTC time setting for AMD
platforms.

This reverts commit 7ad295d519.

Cc: Jinke Fan <fanjinke@hygon.cn>
Link: https://lore.kernel.org/r/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com
Fixes: 7ad295d519 ("rtc: Fix the AltCentury value on AMD/Hygon platform")
Link: https://lore.kernel.org/r/20200104043110.707810-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-01-04 05:31:50 +01:00
Nobuhiro Iwamatsu d53f9b68b3 rtc: pcf8563: Use BIT
Replace (1 << ...) with BIT().

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20191218082553.3309554-1-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:23:53 +01:00
Nobuhiro Iwamatsu 7dc679ef25 rtc: moxart: Convert to SPDX identifier
Use SPDX-License-Identifier instead of a verbose license text.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20191218082836.3309808-1-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:23:49 +01:00
Nobuhiro Iwamatsu d6e62e7f10 rtc: ds1343: Remove unused struct spi_device in struct ds1343_priv
struct spi_device in struct ds1343_priv is not used, remove it.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
CC: Ankur Srivastava <sankurece@gmail.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20191218081917.3308211-1-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:22:32 +01:00
Nobuhiro Iwamatsu 47a3c04837 rtc: rx8025: Remove struct i2c_client from struct rx8025_data
struct i2c_client can be referenced from the device structure, so this
doesn't need to have it in struct rx8025_data.
Remove struct i2c_client from struct rx8025_data.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20191218081624.3307752-1-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:22:21 +01:00
Paul Kocialkowski e2ed7507ae rtc: hym8563: Read the valid flag directly instead of caching it
The RTC has a valid bit in the seconds register that indicates whether
power was lost since the pevious time set. This bit is currently read
once at probe time, cached and updated with set_time.

Howeever, caching the bit may prevent detecting power loss at runtime
(which can happen if the RTC's supply is distinct from the the platform's).

Writing the seconds register when setting time will clear the bit,
so there should be no downside in reading the bit directly instead of
caching it.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20191212153111.966923-2-paul.kocialkowski@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:18:06 +01:00
Paul Kocialkowski f236a2a2eb rtc: hym8563: Return -EINVAL if the time is known to be invalid
The current code returns -EPERM when the voltage loss bit is set.
Since the bit indicates that the time value is not valid, return
-EINVAL instead, which is the appropriate error code for this
situation.

Fixes: dcaf038493 ("rtc: add hym8563 rtc-driver")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20191212153111.966923-1-paul.kocialkowski@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:18:04 +01:00
Nobuhiro Iwamatsu aeedfe7f89 rtc: rx8010: Fix return code for rx8010_probe
In the current code, the return value of devm_request_threaded_irq may be
returned. This fixes it.

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20191217121231.2698817-2-iwamatsu@nigauri.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:16:23 +01:00
zhengbin de0505660f rtc: omap: Remove unneeded semicolon
Fixes coccicheck warning:

drivers/rtc/rtc-omap.c:619:2-3: Unneeded semicolon

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Link: https://lore.kernel.org/r/1576466353-45384-1-git-send-email-zhengbin13@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:16:23 +01:00
Chuhong Yuan 62cbe63f58 rtc: asm9260: add the missed check for devm_clk_get
The driver misses a check for devm_clk_get().
Add the check to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20191214074528.16806-1-hslester96@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:16:23 +01:00
Alexandre Belloni bd0d937928 rtc: rv3029: remove useless error messages
Remove redundant messages or messages that would not add any value because
the information is already conveyed properly using errno.

Link: https://lore.kernel.org/r/20191223100108.1083078-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:16:23 +01:00
Alexandre Belloni fc219291ea rtc: rv3029: annotate init and exit functions
rv30{2,4}9_register_driver and rv30{2,4}9_unregister_driver are only called
from the init and exit functions of the module. Annotate them properly.

Link: https://lore.kernel.org/r/20191223101430.1091572-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:16:23 +01:00
Alexandre Belloni 8e99106c92 rtc: rv3029: drop deprecated compatbiles
The compatibles have been marked obsolete for more that 2 years, drop them
now. Note that this doesn't currently prevent the driver from probing
because the i2c core will still match using the i2c_device_id table.

Link: https://lore.kernel.org/r/20191212230239.65784-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:13:50 +01:00
Alexandre Belloni ec923fcccf rtc: rv3029: add nvram support
Export the 8 byte RAM using nvmem.

Link: https://lore.kernel.org/r/20191214221022.622482-17-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-23 11:13:49 +01:00
Alexandre Belloni cbc943eb37 rtc: rv3029: let the core handle rtc range
Despite the comment, the RV3029 uses a 7bit BCD register for the year,
making 2079 the last supported year.

Link: https://lore.kernel.org/r/20191214221022.622482-14-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:38:07 +01:00
Alexandre Belloni 9346f87066 rtc: rv3029: convert to devm_rtc_allocate_device
This allows further improvement of the driver.

Link: https://lore.kernel.org/r/20191214221022.622482-13-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:38:06 +01:00
Alexandre Belloni cff2e4d278 rtc: rv3029: correctly handle PON and VLOW2
In case the data is invalid (PON or VLOW2 are set in STATUS, explicitly
tell userspace that the time is invalid. Only remove VLOW2 when setting a
new valid time.

Link: https://lore.kernel.org/r/20191214221022.622482-12-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:38:04 +01:00
Alexandre Belloni f630f728a9 rtc: rv3029: add RTC_VL_READ and RTC_VL_CLEAR support
The RV3029 can report three different conditions: power on, voltage dropped
and data is lost and voltage is low and temperature compensation has
stopped. The first two conditions amount to the same status, the RTC data
is invalid.

VLOW1 has to be cleared manually to resume temperature compensation, this
is achieved using RTC_VL_CLEAR.

Link: https://lore.kernel.org/r/20191214221022.622482-11-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:38:02 +01:00
Alexandre Belloni 7518dd9a93 rtc: rv3029: drop rv3029_read_regs and rv3029_write_regs
rv3029_read_regs and rv3029_write_regs are simply calling
regmap_bulk_{read,write}. Drop them and call regmap_{,bulk}_{read,write} as
appropriate.

Link: https://lore.kernel.org/r/20191214221022.622482-10-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:38:01 +01:00
Alexandre Belloni 8fd3d609a5 rtc: rv3029: simplify rv3029_set_alarm
It is unecessay to test alarm->enabled before calling
rv3029_alarm_irq_enable.

Link: https://lore.kernel.org/r/20191214221022.622482-9-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:59 +01:00
Alexandre Belloni 38ce8e30f3 rtc: rv3029: simplify rv3029_alarm_irq_enable
Use regmap_update_bits instead of open coding it in
rv3029_alarm_irq_enable.

Link: https://lore.kernel.org/r/20191214221022.622482-8-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:57 +01:00
Alexandre Belloni bb72dbba83 rtc: rv3029: get rid of rv3029_get_sr
There is no point in having 2 indirections before calling regmap_read,
especially since rv3029_get_sr also changes the return value without any
good reason. Call regmap_read directly.

Link: https://lore.kernel.org/r/20191214221022.622482-7-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:56 +01:00
Alexandre Belloni 35c2daaf55 rtc: rv3029: avoid reading the status register uselessly
RV3029_STATUS is read in multiple location but its value is never used
afterwards. Avoid this register access when not necessary.

Link: https://lore.kernel.org/r/20191214221022.622482-6-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:54 +01:00
Alexandre Belloni 54c5970df4 rtc: rv3029: remove race condition when update STATUS
There is no lock preventing concurrent access to the status register from
bth the rtc subsystem and the hwmon subsystem. Use regmap_update_bits to
ensure updating RV3029_STATUS is properly locked.

Link: https://lore.kernel.org/r/20191214221022.622482-5-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:52 +01:00
Alexandre Belloni 609e97fe31 rtc: rv3029: remove open coded regmap_update_bits
rv3029_update_bits open codes regmap_update_bits and forgets to properly
lock the register range while doing so. Use regmap_update_bits instead.

Link: https://lore.kernel.org/r/20191214221022.622482-4-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:51 +01:00
Alexandre Belloni c509e4344b rtc: rv3029: let regmap validate the register ranges
Instead of trying to validate the accessed registers in custom functions,
let regmap handle that. This allows to defines all the holes in the
register range and gives access to the regmap debugfs register dump.

Link: https://lore.kernel.org/r/20191214221022.622482-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:49 +01:00
Alexandre Belloni 9b45ef9774 rtc: rv3029: use proper name for the driver
The correct name for the rtc is rv3029. c2 is actually the package form
factor rv3029c3 exists and simply has a smaller form factor.

Link: https://lore.kernel.org/r/20191214221022.622482-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:47 +01:00
Alexandre Belloni 8049c11399 rtc: rx8010: return meaningful value for RTC_VL_READ
RX8010_FLAG_VLF means the voltage dropped too low and data has been lost.

Link: https://lore.kernel.org/r/20191214220259.621996-18-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:45 +01:00
Alexandre Belloni 894b043200 rtc: rx8010: remove RTC_VL_CLR handling
Remove RTC_VL_CLR handling because it is a disservice to userspace as it
removes the important information that the RTC data is invalid. This may
lead userspace to set an invalid system time later on.

Link: https://lore.kernel.org/r/20191214220259.621996-17-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-12-18 10:37:44 +01:00