Commit Graph

6436 Commits

Author SHA1 Message Date
Russell King 3fcca9ac6c Merge branch 'mach-types' 2009-11-25 22:17:55 +00:00
Russell King 9faf3c1d0d [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-25 22:17:36 +00:00
Jean PIHET 3336f4f08e ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPAT
Using OABI, the call to put_user in do_signal can fail causing the
calling app to hang.

The solution is to check if put_user fails and force the app to
seg fault in that case.

Tested with multiple sleeping apps/threads (using the nanosleep syscall)
and suspend/resume.

Signed-off-by: janboe <janboe.ye at gmail.com>
Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23 17:28:23 +00:00
Russell King c8a79c3da1 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-11-22 17:11:06 +00:00
Pavel Machek 81065518ed [ARM] pxa/spitz: fix compile regression on spitz
If CONFIG_AKITA is not set, spitz fails to compile. It worked ok in
rc5. Fix is one more ifdef...

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-22 09:32:43 -06:00
Daniel Mack 68a31de302 [ARM] pxa/cpufreq: fix index assignments for end marker
I stumbled over two small things regarding the .index field assignment
in the dynamically created cpu frequency tables for pxa2xx and pxa3xx.

Even though that doesn't currently cause any problem, it should still be
fixed in case the logic in the CPUFREQ core changes.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-20 14:23:13 -06:00
Russell King 4ff1fa278b [ARM] kmap: fix build errors with DEBUG_HIGHMEM enabled
d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to
always be defined.  Solve this by providing invalid definitions for
these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-20 14:23:36 +00:00
Linus Torvalds d22966d067 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP: cs should be positive in gpmc_cs_free()
  omap: fix unlikely(x) < y
  omap3: clock: Fixed dpll3_m2x2 rate calculation
  omap3: clock: Fix the DPLL freqsel computations
  omap: Fix keymap for zoom2 according to matrix keypad framwork
2009-11-18 15:00:21 -08:00
Roel Kluin e7fdc6052e OMAP: cs should be positive in gpmc_cs_free()
The index `cs' is signed, test whether it is negative before we release
gpmc_cs_mem[cs].

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18 10:34:33 -08:00
Roel Kluin d32b20fc7d omap: fix unlikely(x) < y
The closing parenthesis was not in the right location.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18 10:33:41 -08:00
Tero Kristo 72f962fc7b omap3: clock: Fixed dpll3_m2x2 rate calculation
Current calculation does not take into account any changes to M2 divisor, and
thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by
re-routing dpll3_m2x2 parent to dpll3_m2.

Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17 14:14:49 -08:00
Rajendra Nayak 9346f48b26 omap3: clock: Fix the DPLL freqsel computations
Fix the freqsel value computation. Use n instead of (n+1)

The formula in the TRM uses a zero-based N, hence the (n+1); however
at this point in the clock34xx.c code, N is one-based.

Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped
track down this bug.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
[paul@pwsan.com: modified commit message]
Cc: Hayati Bayrakdar <h-bayrakdar@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17 14:14:10 -08:00
Linus Torvalds a044a1b147 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: ensure mfp is in correct range in mfp_{read,write}
  [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values
  ARM: 5787/1: U300 COH 901 331 fixes
  ARM: Fix warning in sa1100-flash.c
  [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus
  [ARM] pxa: fix incorrect mfp_to_gpio() conversion
  [ARM] pxa/colibri: fix AC97 ifdefs and add missing include
  [ARM] pxa: fix missing underscores in mfp-pxa910.h
  [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
2009-11-17 09:19:54 -08:00
Vimal Singh f7343deb0f omap: Fix keymap for zoom2 according to matrix keypad framwork
Interpretation of 'row' and 'col' got reversed in matrix keymap
framework. Also last element '0', present in keymap array, is no
more needed.
Correcting zoom2 keyboard keymap accordingly.

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-16 14:55:59 -08:00
Russell King 112a674f2f Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-11-16 20:59:25 +00:00
Roel Kluin 7df56c2586 [ARM] pxa: ensure mfp is in correct range in mfp_{read,write}
Ensure we do not read/write outside array boundaries with a negative index.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-17 00:50:10 +08:00
Paul Parsons 10d5d99e88 [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values
hx4700 touchscreen events were being dropped in ads7846_rx() because their
pressure values consistently exceeded the platform maximum of 512; a sample
of 256 pressure values were in the range 531 to 815.  Doubling the platform
maximum to 1024 allows hx4700 touchscreen events to pass the test.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-17 00:36:16 +08:00
Russell King e12399fec3 Merge branch 'for-rmk' of git://git.marvell.com/orion 2009-11-16 16:28:15 +00:00
Linus Walleij 378ce74bee ARM: 5787/1: U300 COH 901 331 fixes
This will fix some small issues with the COH 901 331 RTC driver:
- Interrupt is disabled after alarm so that we don't fire
  multiple interrupts.
- We return 0 from the coh901331_alarm_irq_enable() ridding
  a compile warning.
- We alter the name in the U300 device registry to match that
  of the driver so they sucessfully resolve.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-16 16:15:49 +00:00
Nicolas Ferre 0f74296a0f at91: at91sam9g20ek modify dual slot evaluation kit
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the
previous dual slot board definition to match the official rev. C board. It also
allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one.

Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC
slot A. This lead to a modification of those definitions.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16 16:57:50 +01:00
Lennert Buytenhek 2bf3010843 [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus
Disable propagation of mbus errors to the CPU local bus, as this causes
mbus errors (which can occur for example for PCI aborts) to throw CPU
aborts, which we're not set up to deal with.

Reported-by: Dieter Kiermaier <dk-arm-linux@gmx.de>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13 12:14:23 -05:00
Eric Miao 9da4ea69f2 [ARM] pxa: fix incorrect mfp_to_gpio() conversion
Since MFP_PIN_GPIO* now includes 128-255, mfp_to_gpio() is no longer
valid for those additional pins, fix it.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13 17:30:21 +08:00
Marek Vasut 15f593cfcb [ARM] pxa/colibri: fix AC97 ifdefs and add missing include
The AC97 part wasn't initialized on Colibri/PXA320 because the macros
were wrong. Also, the code didn't compile because of a header file not
being included.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13 16:25:47 +08:00
Roel Kluin 2b5e080ae9 [ARM] pxa: fix missing underscores in mfp-pxa910.h
Underscores were missing.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13 16:25:47 +08:00
Marc Zyngier b2b3631662 [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
Commit d2c3706842 ([ARM] pxa:
initialize default interrupt priority and use ICHP for IRQ handling)
broke ISA interrupt support on pxa27x/3xx.

In such a case, PXA_IRQ(0) != 0, and the IRQ number computed from
ICHP must be offset by PXA_IRQ(0).

Tested on an Arcom Zeus (pxa270), with both CONFIG_PXA_HAVE_ISA_IRQS
enabled and disabled.

Signed-off-by: Marc Zyngier <maz@misterjones.org>
Tested-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13 16:25:46 +08:00
Linus Torvalds 031fc8f313 Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap3: Decrease cpufreq transition latency
  omap3: update Pandora defconfig
  omap3: 3430sdp: Enable Linux Regulator framework
  omap3: beagle: Fix USB host port power control
  omap3: pandora: Fix keypad keymap
  omap1: Amstrad Delta defconfig fixes
  omap: Fix omapfb/lcdc on OMAP1510 broken when PM set
  omap: Use resource_size
  omap: Fix race condition in omap dma driver
2009-11-12 14:57:15 -08:00
Mike Turquette b029839cf1 omap3: Decrease cpufreq transition latency
Adjust OMAP3 frequency transition latency from 10,000,000uS to a more
reasonable 300,000uS.  This causes ondemand and conservative governors to
sample CPU load more often resulting in more responsive behavior.

Tested on Android 2.6.29; using this value and conservative governor, CORE
power consumption on Zoom2 was comparable to the old and unresponsive
10,000,000uS value while UI responsiveness was greatly improved.

Signed-off-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 14:59:09 -08:00
Linus Torvalds 749f3cbe1a Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: Use a definition for the userspace cmpxchg emulation syscall
  [ARM] Fix test for unimplemented ARM syscalls
  ARM: 5784/1: fix early boot machine ID mismatch error display
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction
  [ARM] kirkwood: fix PCI I/O port assignment
  [ARM] kirkwood: fix section mismatch
  [ARM] OpenRD base: Initialize PCI express and i2c
  [ARM] properly report mv78100 stepping A1
  ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c
  ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM
  RealView: Add sparsemem support for the RealView PBX platform
  RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements
  RealView: Add default memory configuration
  Check whether the SCU was already initialised
  ARMv7: Check whether the SMP/nAMP mode was already enabled
  [ARM] pxa: fix resume failure by saving/restoring IPRx registers
  [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard
  [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi
2009-11-11 11:32:42 -08:00
Grazvydas Ignotas 1ea6e6652a omap3: update Pandora defconfig
This patch updates defconfig to enable options needed to properly
boot OMAP3 pandora board. It also enables MMC, OTG, GPIO LEDs,
TWL4030 GPIO and sound drivers.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:09 -08:00
Sergio Aguirre b30dcf5f37 omap3: 3430sdp: Enable Linux Regulator framework
Some drivers have dependencies on this, and therefore should be
enabled.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:09 -08:00
Jarkko Nikula e9840dc004 omap3: beagle: Fix USB host port power control
The host port power is enabled by driving the nEN_USB_PWR low as stated in
the comment. This fix is originally from Steve Sakoman <steve@sakoman.com>.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:09 -08:00
Grazvydas Ignotas 24de042ca4 omap3: pandora: Fix keypad keymap
The original TWL4030 keypad driver from linux-omap used KEY()
macro defined as (col, row), but while it was merged upstream
it was changed to use matrix keypad infrastructure, which uses
(row, col) format. Update the keymap in board file to match
layout of mainline driver.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:08 -08:00
Janusz Krzysztofik 0194324455 omap1: Amstrad Delta defconfig fixes
The patch provides the following fixes:

- keep kernel small enough to boot with standard tools,
- ensure compatibility with both new and legacy distros,
- turn on support for recently added or fixed hardware features.

Created and tested against linux-2.6.32-rc5.

Signed-off-by: Janusz Krzysztofik <jkrzysz@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:04:08 -08:00
Janusz Krzysztofik 8561a84f85 omap: Fix omapfb/lcdc on OMAP1510 broken when PM set
With CONFIG_PM=y, the omapfb/lcdc device on Amstrad Delta, after initially
starting correctly, breaks with the following error messages:

omapfb omapfb: resetting (status 0xffffff96,reset count 1)
...
omapfb omapfb: resetting (status 0xffffff96,reset count 100)
omapfb omapfb: too many reset attempts, giving up.

Looking closer at this I have found that it had been broken almost 2 years ago
with commit 2418996e3b100114edb2ae110d5d4acb928909d2, PM fixes for OMAP1.

The definite reason for broken omapfb/lcdc behavoiur in PM mode
appeared to be ARM_IDLECT1:IDLIF_ARM (bit 6) put into idle regardless of LCD
DMA possibly running. The bit were set based on return value of the
omap_dma_running() function that did not check for dedicated LCD DMA
channel status. The patch below fixes this.

Note that the hardcoded register value will be fixed during the next merge
cycle to use OMAP_LCDC_ defines. Currently the OMAP_LCDC_ defines are local
to drivers/video/omap/lcdc.c, so let's not start moving those right now.

Created against linux-2.6.32-rc6

Tested on Amstrad Delta

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-11 11:00:03 -08:00
Tobias Klauser 6d13524209 omap: Use resource_size
Use the resource_size function instead of manually calculating the
resource size. This reduces the chance of introducing off-by-one errors
and actually fixes one in mailbox.c.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-10 18:55:19 -08:00
Tao Hu ee90732456 omap: Fix race condition in omap dma driver
The bug could cause irq enable bit of one DMA channel is
cleared/set unexpectedly when 2 (or more) drivers are calling
omap_request_dma()/omap_free_dma() simultaneously

Signed-off-by: Fei Yang <AFY095@motorola.com>
Signed-off-by: Tao Hu <taohu@motorola.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-10 18:55:17 -08:00
Russell King 65f69e5c16 Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 2009-11-10 23:37:21 +00:00
Russell King cc20d42986 ARM: Use a definition for the userspace cmpxchg emulation syscall
Use a definition for the cmpxchg SWI instead of hard-coding the number.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
2009-11-10 08:41:12 +00:00
Ben Dooks 2ce672e4f4 ARM: S3C: Merge fixes-s3c64xx-dma
Merge branch 'fixes-s3c64xx-dma' into fixes-s3c-2632-rc6
2009-11-09 23:52:34 +00:00
Jassi Brar 336b1a3181 ARM: S3C64XX: DMA: Free node for non-circular queues
We need to free the buff and lli nodes if the buffer queue is
not CIRCULAR.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:51:19 +00:00
Jassi Brar 9b08284bf2 ARM: S3C64XX: DMA: Callback with correct buffer pointer
buffdone callback should be called per buffer request with pointer
to the latest serviced request.
'next' should point to the one next to currently active.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:51:03 +00:00
Jassi Brar 7507f39c57 ARM: S3C64XX: DMA: Make src and dst transfer size same
Some devices don't seem to work if the source and desitnation transfer
widths are not same. For example, SPI dma xfers, with 8bits/word,
don't work without this patch.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:50:42 +00:00
Jassi Brar 6d0b8627d5 ARM: S3C64XX: DMA: Unify callback functions for success/failure
Replace s3c64xx_dma_tcirq and s3c64xx_dma_errirq with the common
s3c64xx_dma_buffdone.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:50:39 +00:00
Jassi Brar 210012a6cd ARM: S3C64XX: DMA: Protect buffer pointers while manipulation
Ensure the DMA buffer points are not updated from
another source during the process of enquing a buffer.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
[ben-linux@fluff.org: Updated patch comment]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:50:39 +00:00
Ben Dooks b3c5496fbf ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular()
The recent changes to arch/arm/mach-s3c6400/include/mach/dma.h have
left an out of date comment in there as well as accidentally changing
the type of the function.

Fix the commit 54489cd46a

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:45:47 +00:00
Maurus Cuelenaere 54489cd46a ARM: S3C64XX: Remove duplicate s3c_dma_has_circular() definition for S3C64xx.
This patch removes the duplicated s3c_dma_has_circular() definition and so fixes
compilation for S3C64xx.

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:40:21 +00:00
Mark Brown c7a1978719 ARM: SMDK6410: Allocate more GPIO space for WM1190-EV1
The WM835x has some GPIOs on it, allocate some space so we can use
them with gpiolib.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:40:21 +00:00
Mark Brown a3323b72b9 ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ line
When used with the WM1190-EV1 board we can use the internal pull up
resistor of the CPU to provide the required pull for the IRQ line.
Without this interrupts from the WM835x don't work in the default
WM1190-EV1 hardwaer configuration.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-09 23:40:21 +00:00
Russell King bfd2e29f04 [ARM] Fix test for unimplemented ARM syscalls
The existing test always failed since 'no' was always greater than
0x7ff.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-08 20:05:28 +00:00
Russell King 5418983113 Merge branch 'for-rmk' of git://git.marvell.com/orion 2009-11-08 16:40:38 +00:00