The readq() and writeq() helpers are available in the
asm-generic/io-64-nonatomic-hi-lo.h and asm-generic/io-64-nonatomic-lo-hi.h
headers. Replace custom implementation by the generic helpers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch updates the method tracing facility as the acpi_debug_trace()
API has been updated to allow it to trace AML interpreter execution, the
meanings and the usages of the API parameters are changed due to the
updates.
The new API:
1. Uses ACPI_TRACE_ENABLED flag to indicate the enabling of the tracer;
2. Allows tracer still can be enabled when method name is not specified so
that the AML interpreter execution can be traced without knowing the
method name, which is useful for kernel boot tracing;
3. Supports arbitrary full path name, it doesn't need to be a name related
to an entrance of acpi_evaluate_object().
Note that the sysfs parameters are also updated so that when reading the
attribute files, ACPICA internal settings are returned.
In order to make the sysfs parameters (acpi.trace_state) available during
boot, this patch adds code to bypass ACPICA semaphore/mutex invocations
when acpi mutex utilities haven't been initialized.
This patch doesn't update documentation of method tracing facility, it will
be updated by further patches.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This effectively reverts the following three commits:
7bc10388cc ACPI / resources: free memory on error in add_region_before()
0f1b414d19 ACPI / PNP: Avoid conflicting resource reservations
b9a5e5e18f ACPI / init: Fix the ordering of acpi_reserve_resources()
(commit b9a5e5e18f introduced regressions some of which, but not
all, were addressed by commit 0f1b414d19 and commit 7bc10388cc
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.
The story is as follows. First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes. Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.
The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18f).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d19.
That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook. That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d19 wouldn't be
necessary any more.
For this reason, the changes made by commit 0f1b414d19 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18f that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581
Link: http://marc.info/?t=143092384600002&r=1&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18f "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix system resume problems related to 32-bit and 64-bit versions
of the Firmware ACPI Control Structure (FACS) in the firmare (Lv
Zheng).
- Fix double initialization of the FACS (Lv Zheng).
- Add _CLS object processing code to ACPICA (Suravee Suthikulpanit).
- Add support for the (currently missing) new GIC version field in
the Multiple APIC Description Table (MADT) (Hanjun Guo).
- Add support for overriding objects in the ACPI namespace to
ACPICA and OSDT support (Lv Zheng, Bob Moore, Zhang Rui).
- Updates related to the TCPA and TPM2 ACPI tables (Bob Moore).
- Restore the commit modifying _REV to always return "2" (as
required by ACPI 6) and add a blacklisting mechanism for
systems that may be affected by that change (Rafael J Wysocki).
- Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=MlWS
-----END PGP SIGNATURE-----
Merge tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPICA updates from Rafael Wysocki:
"Additional ACPICA material for v4.2-rc1
This will update the ACPICA code in the kernel to upstream revision
20150619 (a bug-fix release mostly including stable-candidate fixes)
and restore an earlier ACPICA commit that had to be reverted due to a
regression introduced by it (the regression is addressed by
blacklisting the only known system affected by it to date).
The only new feature added by this update is the support for
overriding objects in the ACPI namespace and a new ACPI table that can
be used for that called the Override System Definition Table (OSDT).
That should allow us to "patch" the ACPI namespace built from
incomplete or incorrect ACPI System Definition tables (DSDT, SSDT)
during system startup without the need to provide replacements for all
of those tables in the future.
Specifics:
- Fix system resume problems related to 32-bit and 64-bit versions of
the Firmware ACPI Control Structure (FACS) in the firmare (Lv
Zheng)
- Fix double initialization of the FACS (Lv Zheng)
- Add _CLS object processing code to ACPICA (Suravee Suthikulpanit)
- Add support for the (currently missing) new GIC version field in
the Multiple APIC Description Table (MADT) (Hanjun Guo)
- Add support for overriding objects in the ACPI namespace to ACPICA
and OSDT support (Lv Zheng, Bob Moore, Zhang Rui)
- Updates related to the TCPA and TPM2 ACPI tables (Bob Moore)
- Restore the commit modifying _REV to always return "2" (as required
by ACPI 6) and add a blacklisting mechanism for systems that may be
affected by that change (Rafael J Wysocki)
- Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner)"
* tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
Revert 'Revert "ACPICA: Permanently set _REV to the value '2'."'
ACPI / init: Make it possible to override _REV
ACPICA: Update version to 20150619
ACPICA: Comment update, no functional change
ACPICA: Update TPM2 ACPI table
ACPICA: Update definitions for the TCPA and TPM2 ACPI tables
ACPICA: Split C library prototypes to new header
ACPICA: De-macroize calls to standard C library functions
ACPI / acpidump: Update acpidump manual
ACPICA: acpidump: Convert the default behavior to dump from /sys/firmware/acpi/tables
ACPICA: acpidump: Allow customized tables to be dumped without accessing /dev/mem
ACPICA: Cleanup output for the ASL Debug object
ACPICA: Update for acpi_install_table memory types
ACPICA: Namespace: Change namespace override to avoid node deletion
ACPICA: Namespace: Add support of OSDT table
ACPICA: Namespace: Add support to allow overriding objects
ACPICA: ACPI 6.0: Add values for MADT GIC version field
ACPICA: Utilities: Add _CLS processing
ACPICA: Add dragon_fly support to unix file mapping file
ACPICA: EFI: Add EFI interface definitions to eliminate dependency of GNU EFI
...
The platform firmware on some systems expects Linux to return "5" as
the supported ACPI revision which makes it expose system configuration
information in a special way.
For example, based on what ACPI exports as the supported revision,
Dell XPS 13 (2015) configures its audio device to either work in HDA
mode or in I2S mode, where the former is supposed to be used on Linux
until the latter is fully supported (in the kernel as well as in user
space).
Since ACPI 6 mandates that _REV should return "2" if ACPI 2 or later
is supported by the OS, a subsequent change will make that happen, so
make it possible to override that on systems where "5" is expected to
be returned for Linux to work correctly one them (such as the Dell
machine mentioned above).
Original-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-video: (38 commits)
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
dell-laptop: Port to new backlight interface selection API
compal-laptop: Port to new backlight interface selection API
asus-wmi: Port to new backlight interface selection API
asus-laptop: Port to new backlight interface selection API
apple-gmux: Port to new backlight interface selection API
acer-wmi: Port to new backlight interface selection API
ACPI / video: Fix acpi_video _register vs _unregister_backlight race
...
* acpi-pm:
ACPI / PM: Add missing pm_generic_complete() invocation
ACPI / PM: Turn power resources on and off in the right order during resume
ACPI / PM: Rework device power management to follow ACPI 6
ACPI / PM: Drop stale comment from acpi_power_transition()
* acpi-apei:
GHES: Make NMI handler have a single reader
GHES: Elliminate double-loop in the NMI handler
GHES: Panic right after detection
GHES: Carve out the panic functionality
GHES: Carve out error queueing in a separate function
* acpi-osl:
ACPI / osl: use same type for acpi_predefined_names values as in definition
* acpi-pci:
ACPI / PCI: remove stale list_head in struct acpi_prt_entry
acpi_osi_is_win8 needs access to acpi_gbl_osi_data which is not exported,
so move it to osl.c. Alternatively we could export acpi_gbl_osi_data but
that seems undesirable.
This allows video_detect.c to be build as a module, besides that
acpi_osi_is_win8() is something which does not really belong in
video_detect.c in the first place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit b9a5e5e18f "ACPI / init: Fix the ordering of
acpi_reserve_resources()" overlooked the fact that the memory
and/or I/O regions reserved by acpi_reserve_resources() may
conflict with those reserved by the PNP "system" driver.
If that conflict actually takes place, it causes the reservations
made by the "system" driver to fail while before commit b9a5e5e18f
all reservations made by it and by acpi_reserve_resources() would be
successful. In turn, that allows the resources that haven't been
reserved by the "system" driver to be used by others (e.g. PCI) which
sometimes leads to functional problems (up to and including boot
failures).
To fix that issue, introduce a common resource reservation routine,
acpi_reserve_region(), to be used by both acpi_reserve_resources()
and the "system" driver, that will track all resources reserved by
it and avoid making conflicting requests.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18f "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the definition of struct acpi_predefined_names, value is of
type char *. Make the OSL override function also work with type
char * (or, more precisely, with a pointer to it).
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since acpi_reserve_resources() is defined as a device_initcall(),
there's no guarantee that it will be executed in the right order
with respect to the rest of the ACPI initialization code. On some
systems this leads to breakage if, for example, the address range
that should be reserved for the ACPI fixed registers is given to
the PCI host bridge instead if the race is won by the wrong code
path.
Fix this by turning acpi_reserve_resources() into a void function
and calling it directly from within the ACPI initialization sequence.
Reported-and-tested-by: George McCollister <george.mccollister@gmail.com>
Link: http://marc.info/?t=143092384600002&r=1&w=2
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now with the base changes to the arm memory mapping it is safe
to convert to using ioremap to map in the tables after
acpi_gbl_permanent_mmap is set.
CC: Rafael J Wysocki <rjw@rjwysocki.net>
Tested-by: Robert Richter <rrichter@cavium.com>
Tested-by: Timur Tabi <timur@codeaurora.org>
Acked-by: Robert Richter <rrichter@cavium.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
It is possible that a GPE handler or a fixed event handler still accessed
after removing the handlers by invoking acpi_remove_gpe_handler() or
acpi_remove_fixed_event_handler(), this possibility can crash OPSM after a
module removal. In the Linux kernel, though all other GPE drivers are not
modules, since the IPMI_SI (ipmi_si_intf.c) can be compiled as a module, we
still need to consider a solution for this issue when the driver switches
to ACPI_GPE_RAW_HANDLER mode in order to invoke GPE APIs.
ACPICA expects acpi_os_wait_events_complete() to be invoked after GPE
disabling so that OSPM can ensure all running GPE handlers have exitted.
But currently acpi_os_wait_events_complete() can only flush _Lxx/_Exx
evaluation work queue and this philosophy cannot work for drivers that have
installed a dedicated GPE handler.
The only way to protect a callback is to perform some state holders
(reference count, state machine) before invoking the callback. Then this
issue can only be fixed by the following means:
1. Flush GPE in ACPICA before invoking the GPE handler. But currently,
there is no such implementation in acpi_ev_gpe_dispatch().
2. Flush GPE in ACPICA OSL before invoking the SCI handler. But currently,
there is no such implementation in acpi_irq().
3. Flush IRQ in OSPM IRQ layer before invoking the IRQ handler. In Linus
kernel, this can be done by synchronize_irq().
4. Flush scheduling in OSPM vector entry layer before invoking the vector.
In Linux, this can be done by synchronize_sched().
Since ACPICA expects the GPE handlers to be flushed by the ACPICA OSL or
the GPE drivers. If it is implemented by the GPE driver, we should see
synchronize_irq()/synchronize_sched() invoked in such drivers. If it is
implemented by the ACPICA OSL, ACPICA currently provides
acpi_os_wait_events_complete() hook to achieve this. After the following
commit:
Commit: 69c841b6dd
Author: Lv Zheng <lv.zheng@intel.com>
Subject: ACPICA: Update use of acpi_os_wait_events_complete interface.
The OSL acpi_os_wait_events_complete() is invoked after a GPE handler is
removed from acpi_remove_gpe_handler() or a fixed event handler is removed
from acpi_remove_fixed_event_handler(). Thus it is possible to implement
GPE handler flushing using this ACPICA OSL now. So the solution 1 is
currently not taken into account.
By examining the IPMI_SI driver, we noticed that the IPMI_SI driver:
1. Uses free_irq() to flush non GPE based IRQ handlers, in free_irq(),
synchronize_irq() is invoked, and
2. Uses acpi_remove_gpe_handler() to flush GPE based IRQ handlers, for such
IRQ handlers, there is no synchronize_irq() invoked.
Since there isn't synchronize_sched() implemented for this driver, from the
driver's perspective, acpi_remove_gpe_handler() should have properly
flushed the GPE handlers for it. Since the driver doesn't invoke
synchronize_irq(), the solution 3 is not what the drivers expect.
This patch implements solution 2. But since given the fact that the GPE is
managed inside of ACPICA, and implementing the GPE flushing requires to
implement the whole GPE management code again in the OSL, instead of
flushing GPE, this patch flushes IRQ in acpi_os_wait_events_complete(). The
flushing could last longer than expected as though the target GPE/fixed
event that is removed can be fastly flushed, other GPEs/fix events can still
be issued during the flushing period.
This patch fixes this issue by invoking synchronize_hardirq() in
acpi_os_wait_events_complete(). The reason why we don't invoke
synchronize_irq() is: currently ACPICA is not threaded IRQ capable and the
only difference between synchronize_irq() and synchronize_hardirq() is
synchronize_irq() also flushes threaded IRQ handlers. Thus using
synchronize_hardirq() can help to reduce the overall synchronization time
for the current ACPICA implementation.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: linux-acpi@vger.kernel.org
Cc: devel@acpica.org
Cc: openipmi-developer@lists.sourceforge.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI maintains cache of ioremap regions to speed up operations and
access to them from irq context where ioremap() calls aren't allowed.
This code abuses synchronize_rcu() on unmap path for synchronization
with fast-path in acpi_os_read/write_memory which uses this cache.
Since v3.10 CPUs are allowed to enter idle state even if they have RCU
callbacks queued, see commit c0f4dfd4f9
("rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacks").
That change caused problems with nvidia proprietary driver which calls
acpi_os_map/unmap_generic_address several times during initialization.
Each unmap calls synchronize_rcu and adds significant delay. Totally
initialization is slowed for a couple of seconds and that is enough to
trigger timeout in hardware, gpu decides to "fell off the bus". Widely
spread workaround is reducing "rcu_idle_gp_delay" from 4 to 1 jiffy.
This patch replaces synchronize_rcu() with synchronize_rcu_expedited()
which is much faster.
Link: https://devtalk.nvidia.com/default/topic/567297/linux/linux-3-10-driver-crash/
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Reported-and-tested-by: Alexander Monakov <amonakov@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI GPE wakeup from suspend-to-idle is currently based on using
the IRQF_NO_SUSPEND flag for the ACPI SCI, but that is problematic
for a couple of reasons. First, in principle the ACPI SCI may be
shared and IRQF_NO_SUSPEND does not really work well with shared
interrupts. Second, it may require the ACPI subsystem to special-case
the handling of device notifications depending on whether or not
they are received during suspend-to-idle in some places which would
lead to fragile code. Finally, it's better the handle ACPI wakeup
interrupts consistently with wakeup interrupts from other sources.
For this reason, remove the IRQF_NO_SUSPEND flag from the ACPI SCI
and use enable_irq_wake()/disable_irq_wake() with it instead, which
requires two additional platform hooks to be added to struct
platform_freeze_ops.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Apple hardware queries _OSI("Darwin") in order to determine whether the
system is running OS X, and changes firmware behaviour based on the
answer. The most obvious difference in behaviour is that Thunderbolt
hardware is forcibly powered down unless the system is running OS X. The
obvious solution would be to simply add Darwin to the list of supported
_OSI strings, but this causes problems.
Recent Apple hardware includes two separate methods for checking _OSI
strings. The first will check whether Darwin is supported, and if so
will exit. The second will check whether Darwin is supported, but will
then continue to check for further operating systems. If a further
operating system is found then later firmware code will assume that the
OS is not OS X. This results in the unfortunate situation where the
Thunderbolt controller is available at boot time but remains powered
down after suspend.
The easiest way to handle this is to special-case it in the
Linux-specific OSI handling code. If we see Darwin, we should answer
true and then disable all other _OSI vendor strings.
The next problem is that the Apple PCI _OSC method has the following
code:
if (LEqual (0x01, OSDW ()))
if (LAnd (LEqual (Arg0, GUID), NEXP)
(do stuff)
else
(fail)
NEXP is a value in high memory and is presumably under the control of
the firmware. No methods sets it. The methods that are called in the "do
stuff" path are dummies. Unless there's some additional firmware call in
early boot, there's no way for this call to succeed - and even if it
does, it doesn't do anything.
The easiest way to handle this is simply to ignore it. We know which
flags would be set, so just set them by hand if the platform is running
in Darwin mode.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
[andreas.noever@gmail.com: merged two patches, do not touch ACPICA]
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the addition of ARM64 that does not have a traditional BIOS to
scan, add a config option which is selected on x86 (ia64 doesn't need
it either, it is EFI/UEFI based system) to do the traditional BIOS
scanning for tables.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
simple_strto*() are obsolete; use kstrto*() instead. Add proper error
checking.
Signed-off-by: Christoph Jaeger <christophjaeger@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-general:
ACPI: Fix bug when ACPI reset register is implemented in system memory
* acpi-video:
ACPI / video: Change the default for video.use_native_backlight to 1
Use acpi_os_map_generic_address to pre-map the reset register if it is
memory mapped, thereby preventing the BUG_ON() in line 1319 of
mm/vmalloc.c from triggering during panic-triggered reboots.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77131
Signed-off-by: Randy Wright <rwright@hp.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
[rjw: Changelog, simplified code]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA doesn't include protections around address space checking, Linux
build tests always complain increased sparse warnings around ACPICA
internal acpi_os_map/unmap_memory() invocations. This patch tries to fix
this issue permanently.
There are 2 choices left for us to solve this issue:
1. Add __iomem address space awareness into ACPICA.
2. Remove sparse checker of __iomem from ACPICA source code.
This patch chooses solution 2, because:
1. Most of the acpi_os_map/unmap_memory() invocations are used for ACPICA.
table mappings, which in fact are not IO addresses.
2. The only IO addresses usage is for "system memory space" mapping code in:
drivers/acpi/acpica/exregion.c
drivers/acpi/acpica/evrgnini.c
drivers/acpi/acpica/exregion.c
The mapped address is accessed in the handler of "system memory space"
- acpi_ex_system_memory_space_handler(). This function in fact can be
changed to invoke acpi_os_read/write_memory() so that __iomem can
always be type-casted in the OSL layer.
According to the above investigation, we drew the following conclusion:
It is not a good idea to introduce __iomem address space awareness into
ACPICA mostly in order to protect non-IO addresses.
We can simply remove __iomem for acpi_os_map/unmap_memory() to remove
__iomem checker for ACPICA code. Then we need to enforce external usages
to invoke other APIs that are aware of __iomem address space.
The external usages are:
drivers/acpi/apei/einj.c
drivers/acpi/acpi_extlog.c
drivers/char/tpm/tpm_acpi.c
drivers/acpi/nvs.c
This patch thus performs cleanups in this way:
1. Add acpi_os_map/unmap_iomem() to be invoked by non-ACPICA code.
2. Remove __iomem from acpi_os_map/unmap_memory().
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that when acpi_gbl_disable_ssdt_table_load is specified, user
still can see it installed into /sys/firmware/acpi/tables on Linux boxes.
This is because the option only stops table "loading", but doesn't stop
table "installing", thus it is still in the acpi_gbl_root_table_list. With
previous cleanups, it is possible to prevent SSDT installations to make
it not such confusing. The global variable is also renamed. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_os_allocate_zeroed instead of acpi_os_allocate + memset.
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpica:
ACPICA: Enable auto-serialization as a default kernel behavior.
ACPICA: Ignore sync_level for methods that have been auto-serialized.
ACPICA: Add additional named objects for the auto-serialize method scan.
ACPICA: Add auto-serialization support for ill-behaved control methods.
ACPICA: Remove global option to serialize all control methods.
The previous commit "ACPICA: Add auto-serialization support for ill-behaved
control methods" introduced the auto-serialization facility as a workaround
that can be enabled by "acpi_auto_serialize":
This feature marks control methods that create named objects as "serialized"
to avoid unwanted AE_ALREADY_EXISTS control method evaluation failures.
Enable method auto-serialization as the default kernel behavior. The new kernel
parameter is also changed from "acpi_auto_serialize" to "acpi_no_auto_serialize"
to reflect the default behavior.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
References: http://www.spinics.net/lists/linux-acpi/msg49496.html
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support to automatically mark a control method as
"serialized" if the method creates any named objects. This will
positively prevent the method from being entered by more than one
thread and thus preventing a possible abort when an attempt is
made to create an object twice.
Implemented by parsing all non-serialize control methods at table
load time.
This feature is disabled by default and this patch also adds a new
Linux kernel parameter "acpi_auto_serialize" to allow this feature
to be turned on for a specific boot.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the reports, the "acpi_serialize" mechanism is broken as:
A. The parallel method calls can still happen when the interpreter lock is
released under the following conditions:
1. External callbacks are invoked, for example, by the region handlers,
the exception handlers, etc.;
2. Module level execution is performed when Load/LoadTable opcodes are
executed, and
3. The _REG control methods are invoked to complete the region
registrations.
B. For the following situations, the interpreter lock need to be released
even for a serialized method while currently, the lock-releasing
operation is marked as a no-op by
acpi_ex_relinquish/reacquire_interpreter() when this mechanism is
enabled:
1. Wait opcode is executed,
2. Acquire opcode is executed, and
3. Sleep opcode is executed.
This patch removes this mechanism and the internal
acpi_ex_relinquish/reacquire_interpreter() APIs. Lv Zheng.
References: https://bugzilla.kernel.org/show_bug.cgi?id=52191
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We already have a macro for PREFIX of "ACPI: " in
drivers/acpi/internal.h, so remove the duplicate ones
in ACPI drivers when internal.h is included.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the only function executed by acpi_hotplug_execute() is
acpi_device_hotplug() and it only is called by the ACPI core,
simplify its definition so that it only takes two arguments, the
ACPI device object pointer and event code, rename it to
acpi_hotplug_schedule() and move its header from acpi_bus.h to
the ACPI core's internal header file internal.h. Modify the
definition of acpi_device_hotplug() so that its first argument is
an ACPI device object pointer and modify the definition of
struct acpi_hp_work accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Sometimes, there might be bugs caused by unexpected AML which is compliant
to the Windows but not compliant to the Linux implementation.
There is a predefined validation mechanism implemented in ACPICA to repair
the unexpected AML evaluation results that are caused by the unexpected
AMLs. For example, BIOS may return misorder _CST result and the repair
mechanism can make an ascending order on the returned _CST package object
based on the C-state type.
This mechanism is quite useful to implement an AML interpreter with better
compliance with the real world where Windows is the de-facto standard and
BIOS codes are only tested on one platform thus not compliant to the
ACPI specification.
But if a compliance issue hasn't been figured out yet, it will be
difficult for developers to identify if the unexpected evaluation result
is caused by this mechanism or by the AML interpreter.
For example, _PR0 is expected to be a control method, but BIOS may use
Package: "Name(_PR0, Package(1) {P1PR})".
This boot option can disable the predefined validation mechanism so that
developers can make sure the root cause comes from the parser/executer.
This patch adds a new kernel parameter to disable this feature.
A build test has been made on a Dell Inspiron mini 1100 (i386 z530)
machine when this patch is applied and the corresponding boot test is
performed w/ or w/o the new kernel parameter specified.
References: https://bugzilla.kernel.org/show_bug.cgi?id=67901
Tested-by: Fabian Wehning <fabian.wehning@googlemail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Marks the function acpi_table_checksum() as static in osl.c
because it is not used outside this file.
This eliminates the following warning in osl.c:
drivers/acpi/osl.c:547:11: warning: no previous prototype for
‘acpi_table_checksum’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Minor cleanup: remove some extra trailing white space.
Signed-off-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To avoid build problems and breaking dependencies between ACPI header
files, <acpi/acpi.h> should not be included directly by code outside
of the ACPI core subsystem. However, that is possible if
<linux/acpi_io.h> is included, because that file contains
a direct inclusion of <acpi/acpi.h>.
For this reason, remove the direct <acpi/acpi.h> inclusion from
<linux/acpi_io.h>, move that file from include/linux/ to include/acpi/
and make <linux/acpi.h> include it for CONFIG_ACPI set along with the
other ACPI header files. Accordingly, Remove the inclusions of
<linux/acpi_io.h> from everywhere.
Of course, that causes the contents of the new <acpi/acpi_io.h> file
to be available for CONFIG_ACPI set only, so intel_opregion.o that
depends on it should also depend on CONFIG_ACPI (and it really should
not be compiled for CONFIG_ACPI unset anyway).
References: https://01.org/linuxgraphics/sites/default/files/documentation/acpi_igd_opregion_spec.pdf
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an ACPI namespace node is removed (usually, as a result of a
table unload), and there is a data object attached to that node,
acpi_ns_delete_node() executes the removal handler submitted to
acpi_attach_data() for that object. That handler is currently empty
for struct acpi_device objects, so it is necessary to detach those
objects from the corresponding ACPI namespace nodes in advance every
time a table unload may happen. That is cumbersome and inefficient
and leads to some design constraints that turn out to be quite
inconvenient (in particular, struct acpi_device objects cannot be
registered for namespace nodes representing devices that are not
reported as present or functional by _STA).
For this reason, introduce a non-empty removal handler for ACPI
device objects that will unregister them when their ACPI namespace
nodes go away.
This code modification alone should not change functionality except
for the ordering of the ACPI hotplug workqueue which should not
matter (without subsequent code changes).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There are two different interfaces for queuing up work items on the
ACPI hotplug workqueue, alloc_acpi_hp_work() used by PCI and PCI host
bridge hotplug code and acpi_os_hotplug_execute() used by the common
ACPI hotplug code and docking stations. They both are somewhat
cumbersome to use and work slightly differently.
The users of alloc_acpi_hp_work() have to submit a work function that
will extract the necessary data items from a struct acpi_hp_work
object allocated by alloc_acpi_hp_work() and then will free that
object, while it would be more straightforward to simply use a work
function with one more argument and let the interface take care of
the execution details.
The users of acpi_os_hotplug_execute() also have to deal with the
fact that it takes only one argument in addition to the work function
pointer, although acpi_os_execute_deferred() actually takes care of
the allocation and freeing of memory, so it would have been able to
pass more arguments to the work function if it hadn't been
constrained by the connection with acpi_os_execute().
Moreover, while alloc_acpi_hp_work() makes GFP_KERNEL memory
allocations, which is correct, because hotplug work items are
always queued up from process context, acpi_os_hotplug_execute()
uses GFP_ATOMIC, as that is needed by acpi_os_execute(). Also,
acpi_os_execute_deferred() queued up by it waits for the ACPI event
workqueues to flush before executing the work function, whereas
alloc_acpi_hp_work() can't do anything similar. That leads to
somewhat arbitrary differences in behavior between various ACPI
hotplug code paths and has to be straightened up.
For this reason, replace both alloc_acpi_hp_work() and
acpi_os_hotplug_execute() with a single interface,
acpi_hotplug_execute(), combining their behavior and being more
friendly to its users than any of the two.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
* acpi-assorted:
ACPI: Add Toshiba NB100 to Vista _OSI blacklist
ACPI / osl: remove an unneeded NULL check
ACPI / platform: add ACPI ID for a Broadcom GPS chip
ACPI: improve acpi_extract_package() utility
ACPI / LPSS: fix UART Auto Flow Control
ACPI / platform: Add ACPI IDs for Intel SST audio device
x86 / ACPI: fix incorrect placement of __initdata tag
ACPI / thermal: convert printk(LEVEL...) to pr_<lvl>
ACPI / sysfs: make GPE sysfs attributes only accept correct values
ACPI / EC: Convert all printk() calls to dynamic debug function
ACPI / button: Using input_set_capability() to mark device's event capability
ACPI / osl: implement acpi_os_sleep() with msleep()
"str" is never NULL here so I have removed the check. There are static
checkers which complain about superfluous NULL checks because it may
indicate confusion or a bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, acpi_os_sleep() uses schedule_timeout_interruptible()
which can be interrupted by a signal, and that causes the real sleep
time to be shorter.
According to the ACPI spec:
The Sleep term is used to implement long-term timing requirements.
Execution is delayed for at least the required number of milliseconds.
The sleeping time should be at least the required number msecs, so use
msleep() which guarantees that to implement it.
Signed-off-by: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Current ACPI tables in initrd is limited to 10, that is too small.
64 should be good enough as we have 35 sigs and could have several
SSDT.
Two problems in current code prevent us from increasing limit:
1. The cpio file info array is put in stack, as every element is 32
bytes, could run out of stack if we have that array size to 64.
We can move it out from stack, make it global and put it into the
__initdata section.
2. early_ioremap() only can remap 256k one time. Current code maps
10 tables at a time. If we increased that limit, the whole size
could be more than 256k, so early_ioremap() would fail with that.
We can map chunks one by one during copying, instead of mapping
all of them together.
Signed-off-by: Yinghai <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Thomas Renninger <trenn@suse.de>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Tang Chen <tangchen@cn.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
