Commit Graph

270 Commits

Author SHA1 Message Date
Kyungmin Park 211ac75f5e [MTD] OneNAND: Error message printing and bad block scan erros
Provide the bad block scan with its own read function so that important error
messages that are not from the the bad block scan, can always be printed.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-07 12:15:01 +09:00
Adrian Hunter 81f38e1123 [MTD] OneNAND: Subpage write returned incorrect length written
When a write is done, the length written is returned.  When a
single subpage is written the length returned should be the
subpage size, however the page size was being returned.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-07 10:55:23 +09:00
Adrian Hunter 52e4200a6d [MTD] OneNAND: Do not allow oob write past end of page
OneNAND can write oob to successive pages, but NAND
does not do that.  For compatibility, disallow OneNAND
from writing past the end of the page.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-06 09:15:39 +09:00
Kyungmin Park 5b4246f1b0 [MTD] OneNAND: Fix typo and remove unnecessary goto statement
In previos patch, there's typo so fix it
Remove unnecessary goto statement

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-02 09:39:21 +09:00
Kyungmin Park abf3c0f23d [MTD] OneNAND: Reduce internal BufferRAM operations
It use blockpage instead of a pair (block, page). It can also cover a small chunk access. 0x00, 0x20, 0x40 and so on.

And in JFFS2 behavior, sometimes it reads two pages alternatively.
e.g., It first reads A page, B page and A page.
So we check another bufferram to find requested page.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-02 09:29:36 +09:00
Kyungmin Park 4f4fad27ac [MTD] OneNAND: Remove line of code that was meant to be deleted in OOB_AUTO
- Iterations of the patch to add oob auto-placement support to OneNAND left a line of code that was meant to have been deleted.
- read mtd->oobsize in onenand_transfer_auto_oob to optimized memcpy

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-02 09:22:21 +09:00
Adrian Hunter a5e7c7b447 [MTD] OneNAND: Add support for auto-placement of out-of-band data
Enable the use of oob operation mode MTD_OOB_AUTO with OneNAND.
Note that MTD_OOB_RAW is still not supported.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-01 09:28:18 +09:00
Kyungmin Park 9bfbc9b24f [MTD] OneNAND: Remove unused fields
- Remove unused fields
- Fix typo

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-31 14:25:21 +09:00
Adrian Hunter 8b29c0b6eb [MTD] OneNAND: Amend write-verify to compare to original buffer
When write-verify is enabled (CONFIG_MTD_ONENAND_VERIFY_WRITE),
the data written is read back and compared.  The comparison
was being made between dataRAM buffers, but this does not
verify that the data made it to the dataRAM correctly in
the first place.  This patch amends write-verify to
compare back to the original buffer.  It also now verifies
sub-page writes.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-25 14:06:33 +09:00
Adrian Hunter ec255e3406 [MTD] OneNAND: Check first or second pages for bad block information
OneNAND records bad block information in the out-of-band area of either the first or second page of a block.  Due to a logic error, only the first page was being checked.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-22 21:30:31 +09:00
Adrian Hunter f00b0046d2 [MTD] OneNAND: Free the bad block table when the device is released
OneNAND does 2 memory allocations for bad block information.
Only one of them was being freed.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-22 21:27:56 +09:00
Kyungmin Park 75384b0d9c [MTD] OneNAND: Update copyrights and code cleanup
Update copyrights and code cleanup

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-18 11:10:57 +09:00
Kyungmin Park 738d61f537 [MTD] OneNAND: Reduce Double Density Package (DDP) operations
- DDP code clean-up
- Reduce block & bufferram operations in DDP

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-18 11:00:31 +09:00
Adrian Hunter 9d03280129 [MTD] OneNAND: Return an error if a read timeout occurs
If OneNAND is operating within specification, all operations should easily be
completed within the 20 millisecond timeout.
This patch faithlessly adds a check for the timeout and returns an error in
that case.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-18 10:59:44 +09:00
Kyungmin Park 10b7a2bd6b [MTD] OneNAND: Fix unlock all status error
We have to set ONENAND_REG_START_BLOCK_ADDRESS to avoid status error

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-18 10:59:16 +09:00
Adrian Hunter 0fc2ccea4c [MTD] OneNAND: Handle DDP chip boundary during read-while-load
The read-while-load method of reading from OneNAND needs to allow
for the change of bufferRAM address at the boundary between the
two chips in a double density (DDP) device.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-10 15:05:22 +02:00
Kyungmin Park b3c9f8bfe7 [MTD] OneNAND: return ecc error code only when 2-bit ecc occurs
we don't need to return ecc error when 1-bit ecc.
We only return error code when 2-bit ecc error

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-10 15:04:28 +02:00
Adrian Hunter a8de85d557 [MTD] OneNAND: Implement read-while-load
Read-while-load enables higher performance read operations.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-10 14:58:42 +02:00
Kyungmin Park 2fd32d4af8 [MTD] OneNAND: fix onenand_wait bug in read ecc error
Even though there is ECC error. OneNAND driver updates the buffram as valid

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-10 14:40:16 +02:00
Artem Bityutskiy 61a7e1983e [MTD] OneNAND: release CPU in cycles
This patch teaches OneNAND to release processor in
read/write/erase cycles and let other processes proceed.
Also, remove buggi touch watchdog call which only hides
the problem instead of solving it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-10 14:39:57 +02:00
Kyungmin Park 60d84f9739 [MTD] OneNAND: add subpage write support
OneNAND supports up to 4 writes at one NAND page. Add support of this feature.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-10 14:35:00 +02:00
Kyungmin Park f627248736 [MTD] OneNAND: fix onenand_wait bug
Fix onenand_wait error reporting

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-01-10 14:34:42 +02:00
Kyungmin Park 66a1e421b9 [MTD] OneNAND: fix oob handling in recent oob patch
There are missing place in recent MTD oob patch

http://git.infradead.org/?p=mtd-2.6.git;a=commitdiff;h=7014568bad55c20b7ee4f439d78c9e875912d51f

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-11 10:46:20 +00:00
David Woodhouse c9ac597729 [MTD] Remove trailing whitespace
The newly-added cafe_ecc.c had a lot of it because of the way the lookup
table was auto-generated; clean up the other files too while we're at it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-30 08:17:38 +00:00
David Woodhouse 103e40f633 Merge git://git.infradead.org/~kmpark/onenand-mtd-2.6 2006-11-29 00:03:10 +00:00
Burman Yan 95b93a0cd4 [MTD] replace kmalloc+memset with kzalloc
Signed-off-by: Yan Burman <yan_952@hotmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-28 23:47:21 +00:00
Kyungmin Park f4f91ac3c8 [MTD] OneNAND: Single bit error detection
Idea from Jarkko Lavinen

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-11-16 12:03:56 +09:00
Kyungmin Park 08f782b60a [MTD] OneNAND: lock support
Now you can use mtd lock inferface on OneNAND

The idea is from Nemakal, Vijaya, thanks

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-11-16 11:29:39 +09:00
Kyungmin Park 2c22120fbd MTD: OneNAND: interrupt based wait support
We can use the two methods to wait.
  1. polling: read interrupt status register
  2. interrupt: use kernel ineterrupt mechanism

  To use interrupt method, you first connect onenand interrupt pin to your
platform and configure interrupt properly

Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
2006-11-16 11:23:48 +09:00
Matt LaPlante 095096038d Fix several typos in drivers/
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 22:31:37 +02:00
Kyungmin Park 28b79ff966 [MTD ONENAND] Check OneNAND lock scheme & all block unlock command support
OneNAND lock scheme depends on density and process of chip.
Some OneNAND chips support all block unlock

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-26 16:46:28 +01:00
Kyungmin Park 98638ee2ed [MTD ONENAND] Remove unused MTD_ONENAND_SYNC_READ configuration
Now the bootloader configures the OneNAND sync. burst mode.
So we don't access Sync. burst mode related registers in kernel.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-26 10:02:37 +01:00
Kyungmin Park 47e777e02e [MTD ONENAND] Fix OneNAND probe
- fix OneNAND probe whether OneNAND Sync. Burst read mode or not
        - fix OneNAND reset wait problem

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-26 09:16:06 +01:00
Thomas Gleixner 8593fbc68b [MTD] Rework the out of band handling completely
Hopefully the last iteration on this!

The handling of out of band data on NAND was accompanied by tons of fruitless
discussions and halfarsed patches to make it work for a particular
problem. Sufficiently annoyed by I all those "I know it better" mails and the
resonable amount of discarded "it solves my problem" patches, I finally decided
to go for the big rework. After removing the _ecc variants of mtd read/write
functions the solution to satisfy the various requirements was to refactor the
read/write _oob functions in mtd.

The major change is that read/write_oob now takes a pointer to an operation
descriptor structure "struct mtd_oob_ops".instead of having a function with at
least seven arguments.

read/write_oob which should probably renamed to a more descriptive name, can do
the following tasks:

- read/write out of band data
- read/write data content and out of band data
- read/write raw data content and out of band data (ecc disabled)

struct mtd_oob_ops has a mode field, which determines the oob handling mode.

Aside of the MTD_OOB_RAW mode, which is intended to be especially for
diagnostic purposes and some internal functions e.g. bad block table creation,
the other two modes are for mtd clients:

MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is
described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's
up to the caller to make sure that the byte positions are not used by the ECC
placement algorithms.

MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in
the out of band area which are described by the oobfree tuples in the ecclayout
data structre which is associated to the devicee.

The decision whether data plus oob or oob only handling is done depends on the
setting of the datbuf member of the data structure. When datbuf == NULL then
the internal read/write_oob functions are selected, otherwise the read/write
data routines are invoked.

Tested on a few platforms with all variants. Please be aware of possible
regressions for your particular device / application scenario

Disclaimer: Any whining will be ignored from those who just contributed "hot
air blurb" and never sat down to tackle the underlying problem of the mess in
the NAND driver grown over time and the big chunk of work to fix up the
existing users. The problem was not the holiness of the existing MTD
interfaces. The problems was the lack of time to go for the big overhaul. It's
easy to add more mess to the existing one, but it takes alot of effort to go
for a real solution.

Improvements and bugfixes are welcome!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner 5bd34c091a [MTD] NAND Replace oobinfo by ecclayout
The nand_oobinfo structure is not fitting the newer error correction
demands anymore. Replace it by struct nand_ecclayout and fixup the users
all over the place. Keep the nand_oobinfo based ioctl for user space
compability reasons.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:50 +02:00
Thomas Gleixner ff268fb879 [MTD] NAND Consolidate oobinfo handling
The info structure for out of band data was copied into
the mtd structure. Make it a pointer and remove the ability
to set it from userspace. The position of ecc bytes is
defined by the hardware and should not be changed by software.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:49 +02:00
Thomas Gleixner 9223a456da [MTD] Remove read/write _ecc variants
MTD clients are agnostic of FLASH which needs ECC suppport.
Remove the functions and fixup the callers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 17:21:03 +02:00
Thomas Gleixner 2528e8cdf3 [MTD] Remove readv/readv_ecc
These functions were never implemented and added only bloat to
partition and concat code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:10:00 +02:00
Thomas Gleixner 9d8522df37 [MTD] Remove nand writev support
NAND writev(_ecc) support is not longer necessary. Remove it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 16:06:03 +02:00
Joern Engel 5fa433942b [MTD] Introduce MTD_BIT_WRITEABLE
o Add a flag MTD_BIT_WRITEABLE for devices that allow single bits to be
  cleared.
o Replace MTD_PROGRAM_REGIONS with a cleared MTD_BIT_WRITEABLE flag for
  STMicro and Intel Sibley flashes with internal ECC.  Those flashes
  disallow clearing of single bits, unlike regular NOR flashes, so the
  new flag models their behaviour better.
o Remove MTD_ECC.  After the STMicro/Sibley merge, this flag is only set
  and never checked.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:29 +02:00
Joern Engel 28318776a8 [MTD] Introduce writesize
At least two flashes exists that have the concept of a minimum write unit,
similar to NAND pages, but no other NAND characteristics.  Therefore, rename
the minimum write unit to "writesize" for all flashes, including NAND.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:05 +02:00
Kyungmin Park 752870707f OneNAND: fix block command typo
We need to check block cmd only instead with comparing with cmd

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:51 +01:00
Kyungmin Park 493c646077 OneNAND: One-Time Programmable (OTP) support
One Block of the NAND Flash Array memory is reserved as
a One-Time Programmable Block memory area.
Also, 1st Block of NAND Flash Array can be used as OTP.

The OTP block can be read, programmed and locked using the same
operations as any other NAND Flash Array memory block.
OTP block cannot be erased.

OTP block is fully-guaranteed to be a valid block.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:50 +01:00
Kyungmin Park 3cecf69ecd OneNAND: Handle erase correctly in Double Density Package (DDP)
There's erase bug in DDP.
We need to add DDP select in erase

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:48 +01:00
Kyungmin Park 34c1060959 OneNAND: Write oob area with aligned size, mtd->oobsize
There's some problem with write oob in serveral platform.
So we write oob with oobsize aligned (16bytes) instead of 3 bytes (from {2,
3})

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:47 +01:00
Kyungmin Park 8e6ec69059 OneNAND: Add write_oob verify function
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
2006-05-12 15:35:47 +01:00
Jarkko Lavinen d9777f1c42 OneNand: Fix free byte positions.
Some free byte positions at onenand_oob_64 were wrong. This was also
reported by Christian Lehne. 3 byte slots are at 2+16*i and 2 byte
slots at 14+16*i.

Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
2006-05-12 15:35:46 +01:00
Kyungmin Park 9c01f87db1 OneNAND: handle byte access on BufferRAM
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:45 +01:00
Kyungmin Park 628bee6593 OneNAND: Add touch_softlock_watchdog()
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2006-05-12 15:35:45 +01:00
Tim Schmielau de25968cc8 [PATCH] fix more missing includes
Include fixes for 2.6.14-git11.  Should allow to remove sched.h from
module.h on i386, x86_64, arm, ia64, ppc, ppc64, and s390.  Probably more
to come since I haven't yet checked the other archs.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:45 -08:00
Kyungmin Park 27f4e08347 [PATCH] mtd onenand driver: use platform_device.h instead device.h
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18 16:29:11 -08:00
Kyungmin Park 532a37cf8d [PATCH] mtd onenand driver: reduce stack usage
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18 16:28:24 -08:00
Kyungmin Park 20ba89a361 [PATCH] mtd onenand driver: fix unlock problem in DDP 2005-12-18 16:28:23 -08:00
Kyungmin Park 37b1cc3910 [PATCH] mtd onenand driver: check correct manufacturer
This (and the three subsequent patches) is working well on OMAP H4 with
2.6.15-rc4 kernel and passes the LTP fs test.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-18 16:28:23 -08:00
Andrew Morton 015953d706 [PATCH] mtd: onenand_base needs sched.h
drivers/mtd/onenand/onenand_base.c: In function `onenand_wait':
drivers/mtd/onenand/onenand_base.c:293: error: `jiffies' undeclared (first use in this function)
drivers/mtd/onenand/onenand_base.c:293: error: (Each undeclared identifier is reported only once
drivers/mtd/onenand/onenand_base.c:293: error: for each function it appears in.)
drivers/mtd/onenand/onenand_base.c:293: error: implicit declaration of function `msecs_to_jiffies'
drivers/mtd/onenand/onenand_base.c:294: error: implicit declaration of function `time_before'
drivers/mtd/onenand/onenand_base.c:301: error: implicit declaration of function `cond_resched'
drivers/mtd/onenand/onenand_base.c: In function `onenand_get_device':
drivers/mtd/onenand/onenand_base.c:522: error: implicit declaration of function `set_current_state'
drivers/mtd/onenand/onenand_base.c:522: error: `TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
drivers/mtd/onenand/onenand_base.c:525: error: implicit declaration of function `schedule'
drivers/mtd/onenand/onenand_base.c: In function `onenand_release_device':
drivers/mtd/onenand/onenand_base.c:545: error: `TASK_UNINTERRUPTIBLE' undeclared (first use in this function)
drivers/mtd/onenand/onenand_base.c:545: error: `TASK_INTERRUPTIBLE' undeclared (first use in this function)

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:50 -08:00
Thomas Gleixner d5c5e78af5 [MTD] OneNAND: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 15:11:28 +01:00
Thomas Gleixner 46d0d0fb61 [MTD] OneNAND/Kconfig: Fix dependencies
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 01:14:05 +01:00
Thomas Gleixner f0250fd7c3 Revert "[PATCH] OneNAND: Add simulator"
This reverts 405c829f98 commit.
2005-11-07 01:11:04 +01:00
Kyungmin Park 83a368380e [MTD] OneNAND: Enhanced support for DDP (Dual Densitiy Packages)
Add density mask for better support of DDP chips.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:59:48 +01:00
Kyungmin Park a41371eb6d [MTD] OneNAND: Power Management (PM) support
Add suspend/resume

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:42:28 +01:00
Kyungmin Park 87590e26ff [MTD] OneNAND: Add missing files
Simple bad block table source and header files

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:39:23 +01:00
Kyungmin Park 1b01d9798d OneNAND: Remove OMAP platform driver
Now we can use the generic platform driver

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:35:12 +01:00
Kyungmin Park 68ee4b1c50 [MTD] OneNAND: Add generic platform driver
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:33:11 +01:00
Kyungmin Park 1501787675 [MTD] OneNAND: Remove experimental Kconfig dependency
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:25:42 +01:00
Kyungmin Park d36d63d404 [PATCH] OneNAND: Fix bug in write verify
- Remove unused block, page parameters
- Add constant instead of runtime value

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:24:51 +01:00
Kyungmin Park 405c829f98 [PATCH] OneNAND: Add simulator
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:23:10 +01:00
Kyungmin Park fcc31470c4 [PATCH] OneNAND: Update OMAP OneNAND mapping using device driver model
- Update OMAP OneNAND mapping file using device driver model
- Remove board specific macro and values.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:22:01 +01:00
Kyungmin Park cdc001305d [PATCH] OneNAND: Simple Bad Block handling support
Based on NAND memory bad block table code

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:20:53 +01:00
Kyungmin Park 52b0eea73d [PATCH] OneNAND: Sync. Burst Read support
Add OneNAND Sync. Burst Read support
Tested with OMAP platform

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:19:37 +01:00
Kyungmin Park cd5f6346bc [MTD] Add initial support for OneNAND flash chips
OneNAND is a new flash technology from Samsung with integrated SRAM
buffers and logic interface.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:17:24 +01:00