Commit Graph

1333 Commits

Author SHA1 Message Date
Linus Torvalds 93db629495 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
  Input: add driver for Synaptics I2C touchpad
  Input: synaptics - add support for reporting x/y resolution
  Input: ALPS - handle touchpoints buttons correctly
  Input: gpio-keys - change timer to workqueue
  Input: ads7846 - pin change interrupt support
  Input: add support for touchscreen on W90P910 ARM platform
  Input: appletouch - improve finger detection
  Input: wacom - clear Intuos4 wheel data when finger leaves proximity
  Input: ucb1400 - move static function from header into core
  Input: add driver for EETI touchpanels
  Input: ads7846 - more detailed model name in sysfs
  Input: ads7846 - support swapping x and y axes
  Input: ati_remote2 - use non-atomic bitops
  Input: introduce lm8323 keypad driver
  Input: psmouse - ESD workaround fix for OLPC XO touchpad
  Input: tsc2007 - make sure platform provides get_pendown_state()
  Input: uinput - flush all pending ff effects before destroying device
  Input: simplify name handling for certain input handles
  Input: serio - do not use deprecated dev.power.power_state
  Input: wacom - add support for Intuos4 tablets
  ...
2009-06-20 10:17:02 -07:00
Mike Rapoport eef3e4cab7 Input: add driver for Synaptics I2C touchpad
This driver supports Synaptics I2C touchpad controller on eXeda
mobile device. Unfortunaltely it only works in relative mode and
thus is not comaptible with Xorg Synaptics driver.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19 22:56:45 -07:00
Tero Saarni ec20a022aa Input: synaptics - add support for reporting x/y resolution
Synaptics uses anisotropic coordinate system.  On some wide touchpads
vertical resolution can be twice as high as horizontal which causes
unequal sensitivity on x/y directions.  Add support for reading the
resolution with EVIOCGABS ioctl.

Signed-off-by: Tero Saarni <tero.saarni@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-19 22:55:17 -07:00
Linus Torvalds 517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Arnd Bergmann 08604bd993 time: move PIT_TICK_RATE to linux/timex.h
PIT_TICK_RATE is currently defined in four architectures, but in three
different places.  While linux/timex.h is not the perfect place for it, it
is still a reasonable replacement for those drivers that traditionally use
asm/timex.h to get CLOCK_TICK_RATE and expect it to be the PIT frequency.

Note that for Alpha, the actual value changed from 1193182UL to 1193180UL.
 This is unlikely to make a difference, and probably can only improve
accuracy.  There was a discussion on the correct value of CLOCK_TICK_RATE
a few years ago, after which every existing instance was getting changed
to 1193182.  According to the specification, it should be
1193181.818181...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Len Brown <lenb@kernel.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:27 -07:00
Greg Kroah-Hartman 1b713e0050 xen: remove driver_data direct access of struct device from more drivers
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: xen-devel@lists.xensource.com
Cc: virtualization@lists.osdl.org
Acked-by: Chris Wright <chrisw@sous-sol.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:28 -07:00
Greg Kroah-Hartman 017596b61f input: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:27 -07:00
Kay Sievers aa5ed63e96 Driver Core: input: add nodename for input drivers
This adds support to the input core to report the proper device name to
userspace for their devices.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:26 -07:00
Linus Torvalds 489f7ab6c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits)
  trivial: remove the trivial patch monkey's name from SubmittingPatches
  trivial: Fix a typo in comment of addrconf_dad_start()
  trivial: usb: fix missing space typo in doc
  trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug
  trivial: Remove the hyphen from git commands
  trivial: fix ETIMEOUT -> ETIMEDOUT typos
  trivial: Kconfig: .ko is normally not included in module names
  trivial: SubmittingPatches: fix typo
  trivial: Documentation/dell_rbu.txt: fix typos
  trivial: Fix Pavel's address in MAINTAINERS
  trivial: ftrace:fix description of trace directory
  trivial: unnecessary (void*) cast removal in sound/oss/msnd.c
  trivial: input/misc: Fix typo in Kconfig
  trivial: fix grammo in bus_for_each_dev() kerneldoc
  trivial: rbtree.txt: fix rb_entry() parameters in sample code
  trivial: spelling fix in ppc code comments
  trivial: fix typo in bio_alloc kernel doc
  trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt
  trivial: Miscellaneous documentation typo fixes
  trivial: fix typo milisecond/millisecond for documentation and source comments.
  ...
2009-06-14 13:46:25 -07:00
Linus Torvalds 2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Linus Torvalds 02a99ed620 Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits)
  microblaze: Don't use access_ok for unaligned
  microblaze: remove unused flat_stack_align() definition
  microblaze: Fix problem with early_printk in startup
  microblaze_mmu_v2: Makefiles
  microblaze_mmu_v2: Kconfig update
  microblaze_mmu_v2: stat.h MMU update
  microblaze_mmu_v2: Elf update
  microblaze_mmu_v2: Update dma.h for MMU
  microblaze_mmu_v2: Update cacheflush.h
  microblaze_mmu_v2: Update signal returning address
  microblaze_mmu_v2: Traps MMU update
  microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU
  microblaze_mmu_v2: Update linker script for MMU
  microblaze_mmu_v2: Add MMU related exceptions handling
  microblaze_mmu_v2: uaccess MMU update
  microblaze_mmu_v2: Update exception handling - MMU exception
  microblaze_mmu_v2: entry.S, entry.h
  microblaze_mmu_v2: Add CURRENT_TASK for entry.S
  microblaze_mmu_v2: MMU asm offset update
  microblaze_mmu_v2: Update tlb.h and tlbflush.h
  ...
2009-06-12 13:15:17 -07:00
Alessio Igor Bogani 492d0f95e6 trivial: input/misc: Fix typo in Kconfig
Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12 18:01:48 +02:00
Linus Walleij dc890c2dcd [ARM] 5544/1: Trust PrimeCell resource sizes
I found the PrimeCell/AMBA Bus drivers distrusting the resource
passed in as part of the struct amba_device abstraction. This
patch removes all hard coded resource sizes found in the PrimeCell
drivers and move the responsibility of this definition back to
the platform/board device definition, which already exist and
appear to be correct for all in-tree users of these drivers.
We do this using the resource_size() inline function which was
also replicated in the only driver using the resource size, so
that has been changed too. The KMI_SIZE was left in kmi.h in case
someone likes it. Test-compiled against Versatile and Integrator
defconfigs, seems to work but I don't posess these boards and
cannot test them.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 15:36:56 +01:00
Ulrich Dangel d7ed5d883c Input: ALPS - handle touchpoints buttons correctly
When pressing any button belonging to the touchpoint, the generated
click events don't belong to the touchpoint but to the touchpad.
This patch fixes this behaviour, the events will be sent via the
correct device, so scrolling with touchpoint is possible.

Signed-off-by: Ulrich Dangel <uli@spamt.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11 02:09:45 -07:00
Alek Du 0b346838c5 Input: gpio-keys - change timer to workqueue
The gpio_get_value function of I2C/SPI GPIO expander may sleep thus this
function call can not be called in a timer function.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11 02:08:50 -07:00
Michael Roth c57c0a2a0d Input: ads7846 - pin change interrupt support
Some SoCs support only pin change interrupts on GPIO pins used as irq
lines.

The ads7846 core is not affected from the additional irqs on the rising
edge because the code accounts touch bounce anyway by kicking in a timer
and disabling the irq after the first request and reenabling the irq after
a timeout when there is no longer pen down detected.

Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11 02:07:25 -07:00
Wan ZongShun 7e3f73754e Input: add support for touchscreen on W90P910 ARM platform
The touchscreen works in two modes, wait trigger mode and auto-semi
mode. The device starts in wait trigger mode and waits until pressure
is detected, then device sets WT_INT bit and raises an interrupt.
The driver should put the device into auto-semi mode and prepare for
reading first X and then Y coordinates. When coordinate data is ready
the driver sets ADC_INT bit and raises interrupt again.

[dtor@mail.ru: various cleanups]
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-11 02:03:39 -07:00
Dmitry Torokhov 4894e4aca8 Merge commit 'v2.6.30' into next 2009-06-11 01:58:01 -07:00
Jeremy Huddleston 05e882f890 Input: appletouch - improve finger detection
The appletouch driver is prone to reporting multiple fingers when only
one is pressing.  The appletouch driver queries an array of pressure
sensors and counts local maxima in pressure to determine the number of
fingers.  It just does this on the raw values, so a data stream like:

0 100 250 300 299 300 250 100 0

actually registers as 2 fingers.

This patch updates the logic to ignore small dips in pressure that are
less than the threshold.

Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-03 07:37:54 -07:00
Ping Cheng a862952830 Input: wacom - clear Intuos4 wheel data when finger leaves proximity
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-06-03 07:37:36 -07:00
Linus Torvalds 5f789cd8ba Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: libps2 - better handle bad scheduler decisions
  Input: usb1400_ts - fix access to "device data" in resume function
  Input: multitouch - augment event semantics documentation
  Input: multitouch - add tracking ID to the protocol
2009-05-29 08:48:25 -07:00
Dmitry Torokhov a3ce6ea46c Input: libps2 - better handle bad scheduler decisions
Sometimes devices send us their responses in time but due to
unfortunate scheduling decisions the receiving thread does not
get scheduled till much later and we erroneously decide that
device timed out. Work around this problem by checking whether we
received the data we needed instead of checking timeout
condition.

Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-28 10:34:02 -07:00
Manuel Traut 346a850e3c Input: usb1400_ts - fix access to "device data" in resume function
platform_data != driver_data

driver data is actually the "correct" place of the struct however it is
not placed there due to the need of the ac97 struct. This is broken since
d9105c2b01 aka "[ARM] 5184/1: Split ucb1400_ts into core and touchscreen"

Signed-off-by: Manuel Traut <manut@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-27 06:24:41 -07:00
Henrik Rydberg df391e0eda Input: multitouch - add tracking ID to the protocol
There are a few multi-touch devices that support finger tracking
well in hardware, Stantum being the prime example. By exposing the
tracking ID in the MT protocol, evdev bandwidth and cpu usage in
user space can be reduced.

This patch adds the ABS_MT_TRACKING_ID to the MT protocol.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Tested-by: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-23 09:53:18 -07:00
Michal Simek 6fa612b56c microblaze: Kconfig: Enable drivers for Microblaze
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21 15:56:04 +02:00
Alessandro Rubini 03fbdb15c1 [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *
The second argument of the probe method points to the amba_id
structure, so it's better passed with the correct type. None of the
current in-tree drivers uses the pointer, so they have only been
checked for a clean compile.

Change suggested by Russell King.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-20 23:26:51 +01:00
Daniel Mack 10494dce0b Input: add driver for EETI touchpanels
This patch adds a driver for EETI's I2C connected touchscreens.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Sven Neumann <s.neumann@raumfeld.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19 19:25:35 -07:00
Michael Roth b58895f8b1 Input: ads7846 - more detailed model name in sysfs
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19 19:25:27 -07:00
Michael Roth 86579a4ccc Input: ads7846 - support swapping x and y axes
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19 19:24:54 -07:00
Ville Syrjala 225c9886b9 Input: ati_remote2 - use non-atomic bitops
No point in using atomic bitops when setting the input device keybits.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-19 19:24:42 -07:00
Felipe Balbi a48b2d4a00 Input: introduce lm8323 keypad driver
lm8323 is the keypad driver used in n810 device.

[akpm@linux-foundation.org: coding-style fixes]
[dtor@mail.ru: various cleanups]
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-15 20:13:25 -07:00
Zephaniah E. Hull 535650fd70 Input: psmouse - ESD workaround fix for OLPC XO touchpad
It appears that when the XO touchpad unit resets from ESD, it sends AA
AA instead of AA 00, the psmouse-base code handles the case of AA 00 by
triggering a serio reconnect for the port, causing a full reprobe of
the device.

Testing with OFW shows that this is likely to solve the problem, so
the attached patch simply expands the existing test to also catch AA AA.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-15 19:24:18 -07:00
Kwangwoo Lee 78f7f36711 Input: tsc2007 - make sure platform provides get_pendown_state()
The platform codes must provide get_pendown_state() for the driver
to work properly.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-15 19:23:54 -07:00
Aristeu Sergio Rozanski Filho 05cebd3816 Input: uinput - flush all pending ff effects before destroying device
The destruction of a input device in uinput is triggered by an ioctl().
If a process tries to destroy an input device while other is uploading a
force feedback effect by evdev to the same device, they'll deadlock.
This patch fixes the problem by flushing all pending FF uploads before
destroying the device and preventing new uploads during this operation.

[dtor@mail.ru: fix logic that ensures we don't submit new requests
 to the device that is being destroyed.]
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-15 19:23:44 -07:00
Linus Torvalds 3b4334e200 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc2007 - fix locking in hrtimer handler
  Input: atkbd - add force release keys quirk for Amilo Xi 3650
  Input: ff-memless - fix signed to unsigned bit overflow
  Input: joydev - blacklist digitizers
2009-05-12 11:21:24 -07:00
Thierry Reding 705a76d2d2 Input: tsc2007 - fix locking in hrtimer handler
Now that hrtimers are always running in hard irq context we can't
unconditionally enable interrupts at the end of the timer function.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11 15:35:48 -07:00
Adrian Batzill 9166d0f620 Input: atkbd - add force release keys quirk for Amilo Xi 3650
Signed-off-by: Adrian Batzill <agib@gmx.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11 15:30:45 -07:00
Thadeu Lima de Souza Cascardo 3d5cb60ef3 Input: simplify name handling for certain input handles
For evdev, joydev and mousedev, instead of having a separate character array
holding name of the handle, use struct devce's name which is the same.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-11 00:11:43 -07:00
Dmitry Torokhov 7e044e056a Input: serio - do not use deprecated dev.power.power_state
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-09 16:10:18 -07:00
Ping Cheng 6f660f12d7 Input: wacom - add support for Intuos4 tablets
Signed-oof-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-08 18:33:43 -07:00
Dmitry Torokhov 9b771ac442 Input: lifebook - don't send incomplete events
When we get a relative packet from trackpoint (when we deal with
touchscreen/trackpoint combo) we should not send events for the device
corresponding to touchscreen as it confuses evtouch driver (it looks
like it keeps previously reported absolute coordinates and the cursor
stays in the same place).

Reported-by: Marcin Drewka <laimoriel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-08 18:31:49 -07:00
Dmitry Torokhov af27a69aab Input: ALPS - Dell Latitude D630/D800 have DualPoint
Dell Latitude D630/D800 have DualPoint (touchpad plus trackpoint)
instead of a simple touchpad and a pass-through port for external
PS/2 mouse.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2009-05-08 18:31:21 -07:00
Dmitry Torokhov d585a021c0 Merge commit 'v2.6.30-rc5' into next 2009-05-08 18:29:27 -07:00
Jussi Kivilinna 9e68177ef9 Input: ff-memless - fix signed to unsigned bit overflow
When userspace sets effect->u.rumble.strong_magnitude to 0x8001 or
larger, ml_combine_effects() would always return strong_magnitude
0xffff.

Problem is that 'gain' is passed in as signed integer. Multiplying
magnitude (__u16) with gain (int) causes magnitude read as signed and
results negative value (with magnitude > 0x8000). This signed integer
is then divided and value, still negative, converted to 32bit unsigned
integer. Finally checking combine overflow min(new+old, 0xffff) gives
out 0xffff.

Fix is to simply change 'gain' to unsigned int.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-07 19:04:16 -07:00
Tim Cole d07a9cba6b Input: joydev - blacklist digitizers
BTN_TOUCH is not set by the wacom driver which causes it to be handled by the
joydev driver while the resulting device is broken. This causes problems with
applications that try to use a joystick device.

Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143

Signed-off-by: Tim Cole <tim.cole@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-07 19:04:03 -07:00
Linus Torvalds 8c0c3f7ff0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: document the multi-touch (MT) protocol
  Input: add detailed multi-touch finger data report protocol
  Input: allow certain EV_ABS events to bypass all filtering
  Input: bcm5974 - add documentation for the driver
  Input: bcm5974 - augment debug information
  Input: bcm5974 - Add support for the Macbook 5 (Unibody)
  Input: bcm5974 - add quad-finger tapping
  Input: bcm5974 - prepare for a new trackpad header type
  Input: appletouch - fix DMA to/from stack buffer
  Input: wacom - fix TabletPC touch bug
  Input: lifebook - add DMI entry for Fujitsu B-2130
  Input: ALPS - add signature for Toshiba Satellite Pro M10
  Input: elantech - make sure touchpad is really in absolute mode
  Input: elantech - provide a workaround for jumpy cursor on firmware 2.34
  Input: ucb1400 - use disable_irq_nosync() in irq handler
  Input: tsc2007 - use disable_irq_nosync() in irq handler
  Input: sa1111ps2 - use disable_irq_nosync() in irq handlers
  Input: omap-keypad - use disable_irq_nosync() in irq handler
2009-05-02 16:35:45 -07:00
Greg Kroah-Hartman 84e5b0d00f Input: wm97xx - do not access dev->driver_data directly
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-01 06:49:15 -07:00
Henrik Rydberg 5e5ee686e3 Input: add detailed multi-touch finger data report protocol
In order to utilize the full power of the new multi-touch devices, a
way to report detailed finger data to user space is needed. This patch
adds a multi-touch (MT) protocol which allows drivers to report details
for an arbitrary number of fingers.

The driver sends a SYN_MT_REPORT event via the input_mt_sync() function
when a complete finger has been reported.

In order to stay compatible with existing applications, the data
reported in a finger packet must not be recognized as single-touch
events. In addition, all finger data must bypass input filtering,
since subsequent events of the same type refer to different fingers.

A set of ABS_MT events with the desired properties are defined. The
events are divided into categories, to allow for partial implementation.
The minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.
If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide
the size of the approaching finger. Anisotropy and direction may be
specified with ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and
ABS_MT_ORIENTATION. Devices with more granular information may specify
general shapes as blobs, i.e., as a sequence of rectangular shapes
grouped together by a ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE
may be used to specify whether the touching tool is a finger or a pen.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:36:24 -07:00
Henrik Rydberg 61994a61bc Input: allow certain EV_ABS events to bypass all filtering
With the upcoming multi-touch interface as an example, there is
a need to make certain that all reported events actually get passed
to the event handler. This patch equips the input core with the
ability to bypass all filtering for certain EV_ABS events.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:36:16 -07:00
Henrik Rydberg 5340219317 Input: bcm5974 - augment debug information
Add more button and finger data to the debug output.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-28 09:36:01 -07:00