Commit Graph

434 Commits

Author SHA1 Message Date
Linus Torvalds 0481990b75 Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6 2005-09-07 17:31:27 -07:00
Linus Torvalds 0dd7f883a9 Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 2005-09-07 17:28:25 -07:00
Linus Torvalds cc896f0871 Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-09-07 17:27:39 -07:00
viro@ZenIV.linux.org.uk 147a67f010 [PATCH] bogus #if (ncr53c406)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:17:34 -07:00
viro@ZenIV.linux.org.uk 185a7a1cd7 [PATCH] -Wundef fixes (ncr5380)
NDEBUG and NDEBUG_ABORT are almost always used as integers in NCR5380; added
define to 0 if they are not defined, switched lone ifdef NDEBUG into if.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:17:33 -07:00
Pekka Enberg 82ca76b6b1 [PATCH] drivers: convert kcalloc to kzalloc
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:46 -07:00
Jeff Garzik ca20aa6954 [libata sata_mv] fix build
This function will go away when pci_intx() finally makes it
into the core PCI layer.
2005-09-07 02:05:59 -04:00
Brett Russ 20f733e7d7 [PATCH] libata: Marvell SATA support (PIO mode)
This is my libata compatible low level driver for the Marvell SATA
family.  Currently it successfully runs in PIO mode on a 6081 chip.
EDMA support is in the works and should be done shortly.  Review,
testing (especially on other flavors of Marvell), comments welcome.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-07 01:56:09 -04:00
Brett Russ 7da7931283 [PATCH] libata: fix pio_mask values (take 2)
ata_get_mode_mask() uses bits 3 and 4 in the pio_mask to represent PIO
modes 3 and 4.  The value read from the drive, which reports support
for PIO3 and PIO4 in bits 0 and 1, is shifted left by 3 bits and OR'd
with 0x7 (which then corresponds to PIO 2-0 in libata).  Thus, the
drivers below need adjustments to comply with the way pio_mask is
used.  I changed the masks from the commented values to all support
PIO4-0, since the spec mandates that PIO0-2 are supported and there's
no reason not to support PIO3 IMO.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-07 01:54:54 -04:00
Jeff Garzik 344babaa9d [kernel-doc] fix various DocBook build problems/warnings
Most serious is fixing include/sound/pcm.h, which breaks the DocBook
build.

The other stuff is just filling in things that cause warnings.
2005-09-07 01:15:17 -04:00
James Bottomley 17fa53da12 Merge by hand (conflicts in sd.c) 2005-09-06 17:52:54 -05:00
James Bottomley 3173d8c342 [SCSI] quieten messages on scsi_execute commands
scsi_io_completion() can be a bit noisy about certain conditions.
Previously this wasn't a problem for internally generated commands,
since they never hit it.  However, since we do all SCSI commands via
bios, now they do.  user CD testers like magicdev are now getting not
ready messages every time they touch the CD to see if there's anything
in it.

Fix this by making all scsi_execute commands REQ_QUIET and making
scsi_finish_io() not say anything for REQ_QUIET.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:37:57 -05:00
Christoph Hellwig fe1b2d544d [SCSI] unexport scsi_add_timer/scsi_delete_timer
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:26:37 -05:00
Christoph Hellwig c5478def7a [SCSI] switch EH thread startup to the kthread API
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:26:06 -05:00
Christoph Hellwig 32993523dc [SCSI] fix SCSI_IOCTL_PROBE_HOST
This returns always false with new-style drivers right now.  Make it
return always true instead, as a host must be present if we are able
to call the ioctl (without a host attached there would be no device
node to call on..)

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:25:16 -05:00
Anton Blanchard 4869040512 [SCSI] Universal Xport no attach blacklist
On Fri, Dec 13, 2002 at 12:24:39AM +1100, Anton Blanchard wrote:

> We tested 2.5.51 on a ppc64 box, qlogic 2312 and a fastt700 array. I
> had CONFIG_SCSI_REPORT_LUNS and unfortunately it thought the management
> LUN was a disk:
>
>   Vendor: IBM       Model: Universal Xport   Rev: 0520
>   Type:   Direct-Access                      ANSI SCSI revision: 03
>
> ...
>
> SCSI device sdaj: drive cache: write through
> SCSI device sdaj: 40960 512-byte hdwr sectors (21 MB)
>  sdaj: unknown partition table
> Attached scsi disk sdaj at scsi2, channel 0, id 0, lun 31
>
> ...
>
> end_request: I/O error, dev sdaj, sector 0

Three years later...

It looks like SGI use the same FC vendor and they already have a
workaround for this issue. The following patch adds the IBM version of
it.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:23:43 -05:00
Alan Stern 4451e47262 [SCSI] sd: pause in sd_spinup_disk for slow USB devices
This patch adds a delay tailored for USB flash devices that are slow to
initialize their firmware.  The symptom is a repeated Unit Attention with
ASC=0x28 (Not Ready to Ready transition).  The patch will wait for up to 5
seconds for such devices to become ready.  Normal devices won't send the
repeated Unit Attention sense key and hence won't trigger the patch.

This fixes a problem with James Roberts-Thomson's USB device, and I've
seen several reports of other devices exhibiting the same symptoms --
presumably they will be helped as well.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:21:53 -05:00
Alan Stern e47373ec1c [SCSI] return success after retries in scsi_eh_tur
The problem lies in the way the error handler uses TEST UNIT READY to
tell whether error recovery has succeeded.  The scsi_eh_tur function
gives up after one round of retrying; after that it decides that more
error recovery is needed.

However TUR is liable to report sense data indicating a retry is needed
when in fact error recovery has succeeded.  A typical example might be
SK=2, ASC=4, ASCQ=1 (Logical unit in process of becoming ready).  The mere
fact that we were able to get a sensible reply to the TUR should indicate
that the device is working well enough to stop error recovery.

I ran across a case back in January where this happened.  A CD-ROM drive
timed out the INQUIRY command, and a device reset fixed the blockage.
But then the drive kept responding with 2/4/1 -- because it was spinning
up I suppose -- until the error handler gave up and placed it offline.
If the initial INQUIRY had received the 2/4/1 instead, everything would
have worked okay.  It doesn't seem reasonable for things to fail just
because the error handler had started running.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:19:23 -05:00
James Bottomley 4dddbc26c3 [SCSI] ibmvscsi: handle large scatter/gather lists
The maximum size of a scatter-gather list that the current IBM VSCSI
Client can handle is 10.  This patch adds large scatter-gather support
to the client so that it is capable of handling up to SG_ALL(255)
number of requests in the scatter-gather list.

Signed-off-by: Linda Xie <lxie@us.ibm.com>
Acked by: Dave C Boutcher <sleddog@us.ibm.com>

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06 17:11:54 -05:00
Linus Torvalds 94f8c66e5e Merge branch 'upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-09-05 05:50:36 -07:00
Jeff Garzik d0bd99299b /spare/repo/libata-dev branch 'iomap-try3' 2005-09-05 05:20:33 -04:00
Pavel Machek ca078bae81 [PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Ralf Baechle 875d43e72b [PATCH] mips: clean up 32/64-bit configuration
Start cleaning 32-bit vs. 64-bit configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:06 -07:00
Andrew Vasquez 1aab60c25e [SCSI] qla2xxx: Update version number to 8.01.00-k.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:54:06 -05:00
Andrew Vasquez f6ef3b1872 [SCSI] qla2xxx: Stop firmware execution at unintialization time.
On ISP24xx parts, stop execution of firmware during ISP
tear-down.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:57 -05:00
Andrew Vasquez fe74c71f6b [SCSI] qla2xxx: Replace schedule_timeout().
From: Nishanth Aravamudan <nacc@us.ibm.com>

Replace schedule_timeout() with
msleep()/msleep_interruptible() as appropriate, to guarantee the task
delays as expected.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:52 -05:00
Andrew Vasquez 86cd6baa82 [SCSI] qla2xxx: Remove bad call to fc_remove_host() during probe failure.
fc_remove_host() should only be called after a scsi_host has
been successfully added via scsi_add_host() -- any failures
while qla2xxx probing would result in an incorrect call to
fc_remove_host() during cleanup.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:50 -05:00
Andrew Vasquez afb046e2be [SCSI] qla2xxx: Add host attributes.
Export additional host information via the shost_attrs member in
the scsi_host template.  Attributes include: driver version,
firmware version, ISP serial number, ISP type, ISP product ID,
HBA model name, HBA model description, PCI interconnect
information, and HBA port state.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:42 -05:00
Andrew Vasquez ce7e4af7f5 [SCSI] qla2xxx: Add change_queue_depth/type() API support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:40 -05:00
Andrew Vasquez 131736d34e [SCSI] qla2xxx: Remove redundant call to pci_unmap_sg().
In a corner-case failure where the request-q does not
contain enough entries for a given request, pci_unmap_sg()
would be called twice.  Remove direct call and let the
failure-path logic handle the unmapping.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:28 -05:00
Andrew Vasquez c32c4cb9fb [SCSI] qla2xxx: Remove RISC pause/release barriers during flash manipulation.
Remove unnecessary RISC pause/release barriers during
ISP24xx flash manipulation.  The ISP24xx can arbitrate flash
access requests during RISC executions.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:23 -05:00
Andrew Vasquez 06c22bd13f [SCSI] qla2xxx: Correct LED scheme definition.
Original implementation used an overloaded bit in the EFI
parameters.  The correct bit is BIT_4 of the special_options
section of NVRAM.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:12 -05:00
Andrew Vasquez c00c72ae01 [SCSI] qla2xxx: Simplify redundant target/device reset logic.
Remove redundant qla2x00_target_reset() function in favour of
the equivalent qla2x00_device_reset().  Update callers of
old function.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:10 -05:00
Andrew Vasquez f7d289f62e [SCSI] qla2xxx: Correct domain/area exclusion logic.
In an FL topology, limit port recognition to those devices
not within the same area and domain of the ISP.  The
firmware will recogonize such devices during local-loop
discovery.

Some devices may respond to a PLOGI before they have
completed their fabric login or they may not be a public
device. In this case they will report:

        domain == 00
        area == 00
        alpa == <XX>

which is valid. Exclude such devices from local loop
discovery.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:08 -05:00
Andrew Vasquez cca5335caf [SCSI] qla2xxx: Add FDMI support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:07 -05:00
Andrew Vasquez ad3e0edace [SCSI] qla2xxx: Export class-of-service (COS) information.
Export COS information for the fc_host and fc_remote_port
objects added by the driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:04 -05:00
Andrew Vasquez 7524f9b9e7 [SCSI] qla2xxx: Use dma_get_required_mask() in determining the 'ideal' DMA mask.
In order to efficiently utilise the ISP's IOCB
request-queue, use the dma_get_required_mask() function to
determine the use of command-type 2 or 3 IOCBs when queueing
SCSI commands.  This applies to ISP2[123]xx chips only, as
the ISP24xx uses command-type 7 IOCBs which use 64bit DSDs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:02 -05:00
Christoph Hellwig 1ff927306e [SCSI] aic7xxx: remove aiclib.c
#include of C files and macro tricks to rename symbols are evil and just
cause trouble.  Let's doublicate the two functions as they're going to
go away soon enough anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:46:07 -05:00
Mark Haverkamp 77d71d222e [SCSI] aacraid: bad BUG_ON fix
This was noticed by Doug Bazamic and the fix found by Mark Salyzyn at
Adaptec.

There was an error in the BUG_ON() statement that validated the
calculated fib size which can cause the driver to panic.

Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:46:06 -05:00
Douglas Gilbert deb92b7ee9 [SCSI] sg direct io/mmap oops, st sync
This patch adopts the same solution as proposed by Kai M. in
a post titled: "[PATCH] SCSI tape signed/unsigned fix".
The fix is in a function that the sg driver borrowed from
the st driver so its maintenance is a little easier if
the functions remain the same after the fix.

   - change nr_pages type from unsigned to signed so errors
     from get_user_pages() call are properly handled

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:46:03 -05:00
James Bottomley 07542b8323 This patch fixes in st.c the bug in the signed/unsigned int comparison
reported by Doug Gilbert and fixed by him in sg.c (see [PATCH] sg direct
io/mmap oops). Doug fixed the comparison in sg.c. This fix for st.c does not
touch the comparison but makes both arguments signed to remove the
problem. The new code is adapted from linux/fs/bio.c.

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>

Rejections fixed up and

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:45:59 -05:00
James Bottomley 61a7afa2c4 [SCSI] embryonic RAID class
The idea behind a RAID class is to provide a uniform interface to all
RAID subsystems (both hardware and software) in the kernel.

To do that, I've made this class a transport class that's entirely
subsystem independent (although the matching routines have to match per
subsystem, as you'll see looking at the code).  I put it in the scsi
subdirectory purely because I needed somewhere to play with it, but it's
not a scsi specific module.

I used a fusion raid card as the test bed for this; with that kind of
card, this is the type of class output you get:

jejb@titanic> ls -l /sys/class/raid_devices/20\:0\:0\:0/
total 0
lrwxrwxrwx  1 root root     0 Aug 16 17:21 component-0 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:0/20:1:0:0/
lrwxrwxrwx  1 root root     0 Aug 16 17:21 component-1 -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:1:1/20:1:1:0/
lrwxrwxrwx  1 root root     0 Aug 16 17:21 device -> ../../../devices/pci0000:80/0000:80:04.0/host20/target20:0:0/20:0:0:0/
-r--r--r--  1 root root 16384 Aug 16 17:21 level
-r--r--r--  1 root root 16384 Aug 16 17:21 resync
-r--r--r--  1 root root 16384 Aug 16 17:21 state

So it's really simple: for a SCSI device representing a hardware raid,
it shows the raid level, the array state, the resync % complete (if the
state is resyncing) and the underlying components of the RAID (these are
exposed in fusion on the virtual channel 1).

As you can see, this type of information can be exported by almost
anything, including software raid.

The more difficult trick, of course, is going to be getting it to
perform configuration type actions with writable attributes.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-30 22:48:51 -05:00
Jeff Garzik 6f10623304 [libata] fix ATAPI-enable typo
Dumb typo spotted by Mark Lord.
2005-08-30 21:52:18 -04:00
Jeff Garzik 374b187357 [libata] update several drivers to use pci_iomap()/pci_iounmap() 2005-08-30 05:42:52 -04:00
Jeff Garzik ea6ba10bbb [libata] __iomem annotations for various drivers 2005-08-30 05:18:18 -04:00
Jeff Garzik e005f01de3 [libata ahci] minor remove/unplug path cleanup
Don't bother calling a hook, to call our own module, to call a helper
than simply calls ionumap().

If you unroll all that convolution, you get a simple kfree()+iounmap()
pair of calls.
2005-08-30 04:18:28 -04:00
Jeff Garzik 1623c81eec [libata] allow ATAPI to be enabled with new atapi_enabled module option
ATAPI is getting close to being ready.  To increase exposure, we enable
the code in the upstream kernel, but default it to off (present
behavior).  Users must pass atapi_enabled=1 as a module option (if
module) or on the kernel command line (if built in) to turn on
discovery of their ATAPI devices.
2005-08-30 03:37:42 -04:00
Linus Torvalds a8e4f435d9 Merge refs/heads/upstream from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 2005-08-29 22:04:58 -07:00
Stephen Rothwell fb120da678 [PATCH] Make MODULE_DEVICE_TABLE work for vio devices
Make MODULE_DEVICE_TABLE work for vio devices.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:31:56 +10:00
Stephen Rothwell 71d276d751 [PATCH] Create vio_bus_ops
Create vio_bus_ops so that we just pass a structure to vio_bus_init
instead of three separate function pointers.

Rearrange vio.h to avoid forward references. vio.h only needs
struct device_node from prom.h so remove the include and just
declare it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30 13:23:47 +10:00