Commit Graph

234 Commits

Author SHA1 Message Date
Stephen Hemminger 53a3294e26 bonding: use net_device_ops
Use the correct pointer in debug message.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-06 10:41:56 -08:00
Holger Eitzenberger e727149e26 802.3ad: use standard ethhdr instead of ad_header
802.3ad has its own ethhdr-like structure in the form of an ad_header,
which is at the start of both the LACPDU and marker PDU.  Both are
the same from the struct values, both are packed as well.

It's therefore perfectly fine to replace the ad_header by the ethhdr
and to remove its definition.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:41:53 -08:00
Holger Eitzenberger e4ac43200f 802.3ad: generalize out mac address initializer
Generalize out mac address initializer for the LACPDU multicast
address and use in two places.  Remove the now unused
AD_MULTICAST_LACPDU_ADDR.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:40:48 -08:00
Holger Eitzenberger 7addeef6b1 802.3ad: initialize ports LACPDU from const initializer
Save some text by initializing ports LACPDU from const initializer,
then get rid of ad_initialize_lacpdu().

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:28:33 -08:00
Holger Eitzenberger 87f422f861 802.3ad: remove typedef around ad_system
As typedefs are considered a bad thing most of the time remove the
typedef around ad_system.

Signed-off-by: Holger Eitzenberger <heitzenberger@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:27:57 -08:00
Holger Eitzenberger 1624db7be0 802.3ad: turn ports is_individual into a bool
Turn ports is_individual into a bool.  There is no functional change.

Signed-off-by: Holger Eitzenberger <heitzenberger@astaro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:27:21 -08:00
Holger Eitzenberger f48127b6f3 802.3ad: turn ports is_enabled into a bool
Turn ports is_enabled into a bool.  There is no functional change.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 13:26:54 -08:00
Holger Eitzenberger d238d458a7 802.3ad: make ntt bool
Turn Need-To-Transmit port variable into a bool.  There is no
functional change.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26 11:18:15 -08:00
Hannes Eder b06715b7a3 drivers/net/bonding: fix sparse warnings: move decls to header file
Fix this sparse warnings:

  drivers/net/bonding/bond_main.c:104:20: warning: symbol 'bonding_defaults' was not declared. Should it be static?
  drivers/net/bonding/bond_main.c:204:22: warning: symbol 'ad_select_tbl' was not declared. Should it be static?
  drivers/net/bonding/bond_sysfs.c:60:21: warning: symbol 'bonding_rwsem' was not declared. Should it be static?

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-25 23:58:57 -08:00
Holger Eitzenberger 3b5b35d022 bonding: use port_params in __update_lacpdu_from_port
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:13:53 -08:00
Holger Eitzenberger 3c52065fbb bonding: use port_params in __update_default_selected()
I also removed some of the unneeded braces in the if condition to
improve readability and a little bit of reformatting.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:13:27 -08:00
Holger Eitzenberger ce6a49ad40 bonding: use port_params in __update_selected()
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:13:07 -08:00
Holger Eitzenberger a6ae186b9a bonding: remove various function declarations
They are all defined before used, it's therefore ok to remove
them.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:12:40 -08:00
Holger Eitzenberger c7e703d01e bonding: init port_params from template
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:12:07 -08:00
Holger Eitzenberger 5eefd1adce bonding: use plain memcpy in __record_default()
Also remove the pointless comment at the top.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:08:46 -08:00
Holger Eitzenberger b99d6ba96d bonding: use port_params in __record_pdu()
It helps in maintaining the various partner information values from
the LACPDU.  It also removes the pointless comment at the top.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:08:14 -08:00
Holger Eitzenberger 1055c9aba3 bonding: introduce and use port_params structure
It generally helps to handle those values in various places, using it
might make the code more readable and gives room for other improvements.

The IEEE standard talks about them as "parameter values".

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:07:38 -08:00
Holger Eitzenberger aa3128199d bonding: improve elaborate port_state assignment
The previous code was just a funny way of assigning both values (they
are both of type u8).

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 19:07:16 -08:00
Holger Eitzenberger e97fd7c6d5 bonding: turn all bond_parm_tbls const
Turn all bond_parm_tbls const.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 23:10:38 -08:00
Holger Eitzenberger 325dcf7a90 bonding: make tbl argument to bond_parse_parm() const
bond_parse_parm() parses a parameter table for a particular value and
is therefore not modifying the table at all.  Therefore make the 2nd
argument const, thus allowing to make the tables const later.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 23:10:17 -08:00
Holger Eitzenberger d78755237f bonding: remove duplicate declarations
Remove some declarations from bonding.c as they are declared in bonding.h
already.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 23:09:49 -08:00
Holger Eitzenberger 5a03cdb7f2 bonding: use pr_debug instead of own macros
Use pr_debug() instead of own macros.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 23:09:22 -08:00
Holger Eitzenberger ef65583d01 bonding: fix compile error if debug enabled
This is what I get if debug is enabled:

drivers/net/bonding/bond_ipv6.c: In function 'bond_na_send':
drivers/net/bonding/bond_ipv6.c:75: error: 'slave' undeclared (first use in this function)
drivers/net/bonding/bond_ipv6.c:75: error: (Each undeclared identifier is reported only once
drivers/net/bonding/bond_ipv6.c:75: error: for each function it appears in.)

This patch fixes that.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 23:08:55 -08:00
Holger Eitzenberger 77afc92b79 bonding: use table for mode names
Use a small array in bond_mode_name() for the names, thus saving some
space:

before

    text     data      bss      dec    hex filename
   57736     9372      344    67452  1077c drivers/net/bonding/bonding.ko

after
    text     data      bss      dec    hex filename
   57441     9372      344    67157  10655 drivers/net/bonding/bonding.ko

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 23:08:09 -08:00
Holger Eitzenberger 5840205426 bonding: add and use bond_is_lb()
Introduce and use bond_is_lb(), it is usefull to shorten the repetitive
check for either ALB or TLB mode.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09 23:07:13 -08:00
Wang Chen 244ef9b917 bond: Kill directly reference of netdev->priv
Simply replace netdev->priv with netdev_priv().

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 21:14:04 -08:00
Stephen Hemminger 008298231a netdev: add more functions to netdevice ops
This patch moves neigh_setup and hard_start_xmit into the network device ops
structure. For bisection, fix all the previously converted drivers as well.
Bonding driver took the biggest hit on this.

Added a prefetch of the hard_start_xmit in the fast path to try and reduce
any impact this would have.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20 20:14:53 -08:00
Stephen Hemminger eb7cc59a03 bonding: convert to net_device_ops
Convert to net_device_ops table.
Note: for some operations move error checking into generic networking
layer (rather than looking at pointers in bonding).

A couple of gratituous style cleanups to get rid of extra {}

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 22:42:42 -08:00
Stephen Hemminger eeda3fd64f netdev: introduce dev_get_stats()
In order for the network device ops get_stats call to be immutable, the handling
of the default internal network device stats block has to be changed. Add a new
helper function which replaces the old use of internal_get_stats.

Note: change return code to make it clear that the caller should not
go changing the returned statistics.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19 21:40:23 -08:00
Wang Chen 454d7c9b14 netdevice: safe convert to netdev_priv() #part-1
We have some reasons to kill netdev->priv:
1. netdev->priv is equal to netdev_priv().
2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously
   netdev_priv() is more flexible than netdev->priv.
But we cann't kill netdev->priv, because so many drivers reference to it
directly.

This patch is a safe convert for netdev->priv to netdev_priv(netdev).
Since all of the netdev->priv is only for read.
But it is too big to be sent in one mail.
I split it to 4 parts and make every part smaller than 100,000 bytes,
which is max size allowed by vger.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 23:37:49 -08:00
Jay Vosburgh fd989c8332 bonding: alternate agg selection policies for 802.3ad
This patch implements alternative aggregator selection policies
for 802.3ad.  The existing policy, now termed "stable," selects the active
aggregator by greatest bandwidth, and only reselects a new aggregator
if the active aggregator is entirely disabled (no more ports or all ports
down).

	This patch adds two new policies: bandwidth and count, selecting
the active aggregator by total bandwidth (like the stable policy) or by
the number of ports in the aggregator, respectively.  These two policies
also differ from the stable policy in that they will reselect the active
aggregator when availability-related changes occur in the bond (e.g.,
link state change).

	This permits "gang failover" within 802.3ad, allowing redundant
aggregators along parallel paths to always maintain the "best" aggregator
as the active aggregator (rather than having to wait for the active to
entirely fail).

	This patch also updates the driver version to 3.5.0.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06 00:49:47 -05:00
Jay Vosburgh 6146b1a4da bonding: Fix ALB mode to balance traffic on VLANs
The current ALB function that processes incoming ARPs
does not handle traffic for VLANs configured above bonding.  This causes
traffic on those VLANs to all be assigned the same slave.  This patch
corrects that misbehavior by locating the bonding interface nested below
the VLAN interface.

	Bug reported by Sven Anders <anders@anduras.de>, who also
tested an earlier version of this patch and confirmed that it resolved
the problem.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06 00:49:40 -05:00
Brian Haley 305d552acc bonding: send IPv6 neighbor advertisement on failover
This patch adds better IPv6 failover support for bonding devices,
especially when in active-backup mode and there are only IPv6 addresses
configured, as reported by Alex Sidorenko.

- Creates a new file, net/drivers/bonding/bond_ipv6.c, for the
   IPv6-specific routines.  Both regular bonds and VLANs over bonds
   are supported.

- Adds a new tunable, num_unsol_na, to limit the number of unsolicited
   IPv6 Neighbor Advertisements that are sent on a failover event.
   Default is 1.

- Creates two new IPv6 neighbor discovery functions:

   ndisc_build_skb()
   ndisc_send_skb()

   These were required to support VLANs since we have to be able to
   add the VLAN id to the skb since ndisc_send_na() and friends
   shouldn't be asked to do this.  These two routines are basically
   __ndisc_send() split into two pieces, in a slightly different order.

- Updates Documentation/networking/bonding.txt and bumps the rev of bond
   support to 3.4.0.

On failover, this new code will generate one packet:

- An unsolicited IPv6 Neighbor Advertisement, which helps the switch
   learn that the address has moved to the new slave.

Testing has shown that sending just the NA results in pretty good
behavior when in active-back mode, I saw no lost ping packets for example.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06 00:49:37 -05:00
Jay Vosburgh 6cf3f41e6c bonding, net: Move last_rx update into bonding recv logic
The only user of the net_device->last_rx field is bonding.
This patch adds a conditional update of last_rx to the bonding special
logic in skb_bond_should_drop, causing last_rx to only be updated when
the ARP monitor is running.

	This frees network device drivers from the necessity of
updating last_rx, which can have cache line thrash issues.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03 18:16:50 -08:00
Harvey Harrison 63779436ab drivers: replace NIPQUAD()
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u
can be replaced with %pI4

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:56:00 -07:00
David S. Miller a1744d3bee Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/wireless/p54/p54common.c
2008-10-31 00:17:34 -07:00
Andy Gospodarek ce39a800ea bonding: fix panic when taking bond interface down before removing module
A panic was discovered with bonding when using mode 5 or 6 and trying to
remove the slaves from the bond after the interface was taken down.
When calling 'ifconfig bond0 down' the following happens:

    bond_close()
        bond_alb_deinitialize()
            tlb_deinitialize()
		kfree(bond_info->tx_hashtbl)
                bond_info->tx_hashtbl = NULL

Unfortunately if there are still slaves in the bond, when removing the
module the following happens:

    bonding_exit()
        bond_free_all()
            bond_release_all()
                bond_alb_deinit_slave()
                    tlb_clear_slave()
                        tx_hash_table = BOND_ALB_INFO(bond).tx_hashtbl
			u32 next_index = tx_hash_table[index].next

As you might guess we panic when trying to access a few entries into the
table that no longer exists.

I experimented with several options (like moving the calls to
tlb_deinitialize somewhere else), but it really makes the most sense to
be part of the bond_close routine.  It also didn't seem logical move
tlb_clear_slave around too much, so the simplest option seems to add a
check in tlb_clear_slave to make sure we haven't already wiped the
tx_hashtbl away before searching for all the non-existent hash-table
entries that used to point to the slave as the output interface.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:46:12 -04:00
Jay Vosburgh a434e43f3d bonding: Clean up resource leaks
This patch reworks the resource free logic performed at the time
a bonding device is released.  This (a) closes two resource leaks, one
for workqueues and one for multicast lists, and (b) improves commonality
of code between the "destroy one" and "destroy all" paths by performing
final free activity via destructor instead of explicitly (and differently)
in each path.

"Sean E. Millichamp" <sean@bruenor.org> reported the workqueue
leak, and included a different patch.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:46:04 -04:00
Jay Vosburgh fba4acda35 bonding: fix miimon failure counter
During the rework of the mii monitor for:

  commit f0c76d6177
  Author: Jay Vosburgh <fubar@us.ibm.com>
  Date:   Wed Jul 2 18:21:58 2008 -0700

    bonding: refactor mii monitor

I left out the increment of the link failure counter.  This
patch corrects that omission.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-31 00:45:51 -04:00
Harvey Harrison 8cf14e3837 net: easy removals of HIPQUAD using %pI4 format
As a bonus, removes some unnecessary byteswapping.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-29 22:43:33 -07:00
Johannes Berg e174961ca1 net: convert print_mac to %pM
This converts pretty much everything to print_mac. There were
a few things that had conflicts which I have just dropped for
now, no harm done.

I've built an allyesconfig with this and looked at the files
that weren't built very carefully, but it's a huge patch.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 17:06:18 -07:00
Herbert Xu b63365a2d6 net: Fix disjunct computation of netdev features
My change

    commit e2a6b85247
    net: Enable TSO if supported by at least one device

didn't do what was intended because the netdev_compute_features
function was designed for conjunctions.  So what happened was that
it would simply take the TSO status of the last constituent device.

This patch extends it to support both conjunctions and disjunctions
under the new name of netdev_increment_features.

It also adds a new function netdev_fix_features which does the
sanity checking that usually occurs upon registration.  This ensures
that the computation doesn't result in an illegal combination
since this checking is absent when the change is initiated via
ethtool.

The two users of netdev_compute_features have been converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-23 01:11:29 -07:00
Ben Dooks b22596726b drivers/net/bonding: sparse fixes for exported tables
The following sparse warnings are being generated
because bonding.h is missing definitons for items
declared in bond_main.c but also used in bond_sysfs.h

Also export bond_dev_list as this is also declared
in bond_main but used elsewhere in drivers/net/bonding.

bond_main.c:105:20: warning: symbol 'bonding_defaults' was not declared. Should it be static?
bond_main.c:148:1: warning: symbol 'bond_dev_list' was not declared. Should it be static?
bond_main.c:162:22: warning: symbol 'bond_lacp_tbl' was not declared. Should it be static?
bond_main.c:168:22: warning: symbol 'bond_mode_tbl' was not declared. Should it be static?
bond_main.c:179:22: warning: symbol 'xmit_hashtype_tbl' was not declared. Should it be static?
bond_main.c:186:22: warning: symbol 'arp_validate_tbl' was not declared. Should it be static?
bond_main.c:194:22: warning: symbol 'fail_over_mac_tbl' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 22:12:57 -04:00
Stephen Hemminger fa53ebac42 bonding: add more ethtool support
This patch allows reporting the link, checksum, and feature settings
of bonded device by using generic hooks.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:59:02 -04:00
Harvey Harrison b39d66a81f drivers/net: replace __FUNCTION__ with __func__
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:59:00 -04:00
Vlad Yasevich 2d1ea19da0 bonding: Do not tx-balance some IPv6 packets on ALB/TLB bonds
IPv6 all-node-multicasts and DAD probes should not be tx-balanced
on ALB/TLB bonds.  The all-node-multicast is an equivalent to IPv4
broadcasts.  DAD probes have to be sent only on the primary so that
we don't get false-positive detections.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:49:01 -04:00
Brian Haley f14c4e4e36 bonding: change some __constant_htons() to htons()
Resending since I didn't see any responses from the first try.

Change __constant_htons() to htons() in the bonding driver, it should
only be used for initializers.

-Brian

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03 10:03:07 -04:00
Moni Shoua db018a5f49 bonding: Don't destroy bonding master when removing slave via sysfs
It is wrong to destroy a bonding master from a context that uses the sysfs
of that bond. When last IPoIB slave is unenslaved from by writing to a
sysfs file (for bond0 this would be /sys/class/net/bond0/bonding/slaves)
the driver tries to destroy the bond. This is wrong and can lead to a
lockup or a crash.  This fix lets the bonding master stay and relies on
the user to destroy the bonding master if necessary (i.e. before module
ib_ipoib is unloaded)

This patch affects only bonds of IPoIB slaves. Ethernet slaves stay
unaffected.

Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 03:59:56 -04:00
Jay Vosburgh f0c76d6177 bonding: refactor mii monitor
Refactor mii monitor.  As with the previous ARP monitor refactor,
the motivation for this is to handle locking rationally (in this case,
removing conditional locking) and generally clean up the code.

	This patch breaks up the monolithic mii monitor into two phases:
an inspection phase, followed by an optional commit phase.  The commit phase
is the only portion that requires RTNL or makes changes to state, and is
only called when inspection finds something to change.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-07 03:59:53 -04:00
David S. Miller cf508b1211 netdev: Handle ->addr_list_lock just like ->_xmit_lock for lockdep.
The new address list lock needs to handle the same device layering
issues that the _xmit_lock one does.

This integrates work done by Patrick McHardy.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 14:16:42 -07:00