Commit Graph

2033 Commits

Author SHA1 Message Date
Linus Torvalds c7a19c795b Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dma updates from Vinod Koul:
 "Some notable changes are:
   - new driver for AMBA AXI NBPF by Guennadi
   - new driver for sun6i controller by Maxime
   - pl330 drivers fixes from Lar's
   - sh-dma updates and fixes from Laurent, Geert and Kuninori
   - Documentation updates from Geert
   - drivers fixes and updates spread over dw, edma, freescale, mpc512x
     etc.."

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (72 commits)
  dmaengine: sun6i: depends on RESET_CONTROLLER
  dma: at_hdmac: fix invalid remaining bytes detection
  dmaengine: nbpfaxi: don't build this driver where it cannot be used
  dmaengine: nbpf_error_get_channel() can be static
  dma: pl08x: Use correct specifier for size_t values
  dmaengine: Remove the context argument to the prep_dma_cyclic operation
  dmaengine: nbpfaxi: convert to tasklet
  dmaengine: nbpfaxi: fix a theoretical race
  dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores
  dmaengine: add device tree binding documentation for the nbpfaxi driver
  dmaengine: edma: Do not register second device when booted with DT
  dmaengine: edma: Do not change the error code returned from edma_alloc_slot
  dmaengine: rcar-dmac: Add device tree bindings documentation
  dmaengine: shdma: Allocate cyclic sg list dynamically
  dmaengine: shdma: Make channel filter ignore unrelated devices
  dmaengine: sh: Rework Kconfig and Makefile
  dmaengine: sun6i: Fix memory leaks
  dmaengine: sun6i: Free the interrupt before killing the tasklet
  dmaengine: sun6i: Remove switch statement from buswidth convertion routine
  dmaengine: of: kconfig: select DMA_ENGINE when DMA_OF is selected
  ...
2014-08-11 07:14:01 -07:00
Linus Torvalds 63b12bdb0d Merge branch 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc
Pull arch signal handling cleanup from Richard Weinberger:
 "This patch series moves all remaining archs to the get_signal(),
  signal_setup_done() and sigsp() functions.

  Currently these archs use open coded variants of the said functions.
  Further, unused parameters get removed from get_signal_to_deliver(),
  tracehook_signal_handler() and signal_delivered().

  At the end of the day we save around 500 lines of code."

* 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits)
  powerpc: Use sigsp()
  openrisc: Use sigsp()
  mn10300: Use sigsp()
  mips: Use sigsp()
  microblaze: Use sigsp()
  metag: Use sigsp()
  m68k: Use sigsp()
  m32r: Use sigsp()
  hexagon: Use sigsp()
  frv: Use sigsp()
  cris: Use sigsp()
  c6x: Use sigsp()
  blackfin: Use sigsp()
  avr32: Use sigsp()
  arm64: Use sigsp()
  arc: Use sigsp()
  sas_ss_flags: Remove nested ternary if
  Rip out get_signal_to_deliver()
  Clean up signal_delivered()
  tracehook_signal_handler: Remove sig, info, ka and regs
  ...
2014-08-09 09:58:12 -07:00
Andy Lutomirski a6c19dfe39 arm64,ia64,ppc,s390,sh,tile,um,x86,mm: remove default gate area
The core mm code will provide a default gate area based on
FIXADDR_USER_START and FIXADDR_USER_END if
!defined(__HAVE_ARCH_GATE_AREA) && defined(AT_SYSINFO_EHDR).

This default is only useful for ia64.  arm64, ppc, s390, sh, tile, 64-bit
UML, and x86_32 have their own code just to disable it.  arm, 32-bit UML,
and x86_64 have gate areas, but they have their own implementations.

This gets rid of the default and moves the code into ia64.

This should save some code on architectures without a gate area: it's now
possible to inline the gate_area functions in the default case.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [in principle]
Acked-by: Richard Weinberger <richard@nod.at> [for um]
Acked-by: Will Deacon <will.deacon@arm.com> [for arm64]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Nathan Lynch <Nathan_Lynch@mentor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:27 -07:00
Daniel Palmer d72849c35b sh: SH7724 clock fixes
Fix the device name for the CMT.

Add clocks called usb0 and usb1 so that r8a66597_hcd works again on the
ecovec24 board

Signed-off-by: Daniel Palmer <danieruru@gmail.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:12 -07:00
Fabian Frederick 7c0368211d arch/sh/kernel/time.c: use PTR_ERR_OR_ZERO
Replace IS_ERR/PTR_ERR.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:12 -07:00
Richard Weinberger b46e848768 sh: Use get_signal() signal_setup_done()
Use the more generic functions get_signal() signal_setup_done()
for signal delivery.

Signed-off-by: Richard Weinberger <richard@nod.at>
2014-08-06 13:03:19 +02:00
Linus Torvalds ef35ad26f8 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
 "Kernel side changes:

   - Consolidate the PMU interrupt-disabled code amongst architectures
     (Vince Weaver)

   - misc fixes

  Tooling changes (new features, user visible changes):

   - Add support for pagefault tracing in 'trace', please see multiple
     examples in the changeset messages (Stanislav Fomichev).

   - Add pagefault statistics in 'trace' (Stanislav Fomichev)

   - Add header for columns in 'top' and 'report' TUI browsers (Jiri
     Olsa)

   - Add pagefault statistics in 'trace' (Stanislav Fomichev)

   - Add IO mode into timechart command (Stanislav Fomichev)

   - Fallback to syscalls:* when raw_syscalls:* is not available in the
     perl and python perf scripts.  (Daniel Bristot de Oliveira)

   - Add --repeat global option to 'perf bench' to be used in benchmarks
     such as the existing 'futex' one, that was modified to use it
     instead of a local option.  (Davidlohr Bueso)

   - Fix fd -> pathname resolution in 'trace', be it using /proc or a
     vfs_getname probe point.  (Arnaldo Carvalho de Melo)

   - Add suggestion of how to set perf_event_paranoid sysctl, to help
     non-root users trying tools like 'trace' to get a working
     environment.  (Arnaldo Carvalho de Melo)

   - Updates from trace-cmd for traceevent plugin_kvm plus args cleanup
     (Steven Rostedt, Jan Kiszka)

   - Support S/390 in 'perf kvm stat' (Alexander Yarygin)

  Tooling infrastructure changes:

   - Allow reserving a row for header purposes in the hists browser
     (Arnaldo Carvalho de Melo)

   - Various fixes and prep work related to supporting Intel PT (Adrian
     Hunter)

   - Introduce multiple debug variables control (Jiri Olsa)

   - Add callchain and additional sample information for python scripts
     (Joseph Schuchart)

   - More prep work to support Intel PT: (Adrian Hunter)
     - Polishing 'script' BTS output
     - 'inject' can specify --kallsym
     - VDSO is per machine, not a global var
     - Expose data addr lookup functions previously private to 'script'
     - Large mmap fixes in events processing

   - Include standard stringify macros in power pc code (Sukadev
     Bhattiprolu)

  Tooling cleanups:

   - Convert open coded equivalents to asprintf() (Andy Shevchenko)

   - Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)

   - Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de
     Melo)

   - No need to reimplement err() in 'perf bench sched-messaging', drop
     barf().  (Davidlohr Bueso).

   - Remove ev_name argument from perf_evsel__hists_browse, can be
     obtained from the other parameters.  (Jiri Olsa)

  Tooling fixes:

   - Fix memory leak in the 'sched-messaging' perf bench test.
     (Davidlohr Bueso)

   - The -o and -n 'perf bench mem' options are mutually exclusive, emit
     error when both are specified.  (Davidlohr Bueso)

   - Fix scrollbar refresh row index in the ui browser, problem exposed
     now that headers will be added and will be allowed to be switched
     on/off.  (Jiri Olsa)

   - Handle the num array type in python properly (Sebastian Andrzej
     Siewior)

   - Fix wrong condition for allocation failure (Jiri Olsa)

   - Adjust callchain based on DWARF debug info on powerpc (Sukadev
     Bhattiprolu)

   - Fix a risk for doing free on uninitialized pointer in traceevent
     lib (Rickard Strandqvist)

   - Update attr test with PERF_FLAG_FD_CLOEXEC flag (Jiri Olsa)

   - Enable close-on-exec flag on perf file descriptor (Yann Droneaud)

   - Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)

   - Event ordering fixes (Jiri Olsa)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (123 commits)
  Revert "perf tools: Fix jump label always changing during tracing"
  perf tools: Fix perf usage string leftover
  perf: Check permission only for parent tracepoint event
  perf record: Store PERF_RECORD_FINISHED_ROUND only for nonempty rounds
  perf record: Always force PERF_RECORD_FINISHED_ROUND event
  perf inject: Add --kallsyms parameter
  perf tools: Expose 'addr' functions so they can be reused
  perf session: Fix accounting of ordered samples queue
  perf powerpc: Include util/util.h and remove stringify macros
  perf tools: Fix build on gcc 4.4.7
  perf tools: Add thread parameter to vdso__dso_findnew()
  perf tools: Add dso__type()
  perf tools: Separate the VDSO map name from the VDSO dso name
  perf tools: Add vdso__new()
  perf machine: Fix the lifetime of the VDSO temporary file
  perf tools: Group VDSO global variables into a structure
  perf session: Add ability to skip 4GiB or more
  perf session: Add ability to 'skip' a non-piped event stream
  perf tools: Pass machine to vdso__dso_findnew()
  perf tools: Add dso__data_size()
  ...
2014-08-04 16:09:53 -07:00
Steven Rostedt (Red Hat) 7fa322dba3 sh: ftrace: Add call to ftrace_graph_is_dead() in function graph code
ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.

Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing. To do this, the arch code
must call ftrace_graph_is_dead() before it implements function graph.

Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-18 13:56:57 -04:00
Geert Uytterhoeven 28564f0893 sh: dma: Use defines instead of hardcoded numbers
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-07-15 18:02:29 +09:00
Vince Weaver a10d60c08c sh, perf: Use common PMU interrupt disabled code
Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for
failing a sampling event when no PMU interrupt is available.

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150205300.16738@vincent-weaver-1.umelst.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-19 19:37:51 +02:00
Christoph Lameter c473b2c6f6 sh: Replace __get_cpu_var uses
__get_cpu_var() is used for multiple purposes in the kernel source.  One
of them is address calculation via the form &__get_cpu_var(x).  This
calculates the address for the instance of the percpu variable of the
current processor based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination.  However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less
registers are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well.  Once these
operations are used throughout then specialized macros can be defined in
non -x86 arches as well in order to optimize per cpu access by f.e.  using
a global register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Signed-off-by: Christoph Lameter <cl@linux.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> [compilation only]
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:52 -07:00
Laurent Pinchart 5204601c08 sh: Switch to new style MTU2 device
The MTU2 (Multi-Function Timer Pulse Unit 2) driver implements a new
style of platform data that handles the timer as a single device with
multiple channel. Switch from the old-style platform data to the
new-style platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11 19:35:28 +09:00
Laurent Pinchart 1399c195ef sh: Switch to new style TMU device
The TMU (Timer Unit) driver implements a new style of platform data that
handles the timer as a single device with multiple channel. Switch from
the old-style platform data to the new-style platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11 19:35:27 +09:00
Laurent Pinchart 9b17e48cd4 sh: Switch to new style CMT device
The CMT (Compare Match Timer) driver implements a new style of platform
data that handles the timer as a single device with multiple channel.
Switch from the old-style platform data to the new-style platform data.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-11 19:35:26 +09:00
Uwe Kleine-König ce816fa88c Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:11 -07:00
Linus Torvalds 76ca7d1cca Merge branch 'akpm' (incoming from Andrew)
Merge first patch-bomb from Andrew Morton:
 - Various misc bits
 - kmemleak fixes
 - small befs, codafs, cifs, efs, freexxfs, hfsplus, minixfs, reiserfs things
 - fanotify
 - I appear to have become SuperH maintainer
 - ocfs2 updates
 - direct-io tweaks
 - a bit of the MM queue
 - printk updates
 - MAINTAINERS maintenance
 - some backlight things
 - lib/ updates
 - checkpatch updates
 - the rtc queue
 - nilfs2 updates
 - Small Documentation/ updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (237 commits)
  Documentation/SubmittingPatches: remove references to patch-scripts
  Documentation/SubmittingPatches: update some dead URLs
  Documentation/filesystems/ntfs.txt: remove changelog reference
  Documentation/kmemleak.txt: updates
  fs/reiserfs/super.c: add __init to init_inodecache
  fs/reiserfs: move prototype declaration to header file
  fs/hfsplus/attributes.c: add __init to hfsplus_create_attr_tree_cache()
  fs/hfsplus/extents.c: fix concurrent acess of alloc_blocks
  fs/hfsplus/extents.c: remove unused variable in hfsplus_get_block
  nilfs2: update project's web site in nilfs2.txt
  nilfs2: update MAINTAINERS file entries fix
  nilfs2: verify metadata sizes read from disk
  nilfs2: add FITRIM ioctl support for nilfs2
  nilfs2: add nilfs_sufile_trim_fs to trim clean segs
  nilfs2: implementation of NILFS_IOCTL_SET_SUINFO ioctl
  nilfs2: add nilfs_sufile_set_suinfo to update segment usage
  nilfs2: add struct nilfs_suinfo_update and flags
  nilfs2: update MAINTAINERS file entries
  fs/coda/inode.c: add __init to init_inodecache()
  BEFS: logging cleanup
  ...
2014-04-03 16:22:16 -07:00
Geert Uytterhoeven ba6e8b8f02 sh: sh7757: switch RSPI clock to dev ID match
Switch the RSPI MSTP clock on SH7757 from a con ID match to a dev ID
match, so we can start looking it up using clk_get() with a NULL ID.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:53 -07:00
Bobby Bingham a3c195144e sh: don't pass saved userspace state to exception handlers
The compiler is permitted to generate code which overwrites the
parameters to a function.  If those parameters include the only saved
copy we have of userspace's registers, we're in trouble.

Signed-off-by: Bobby Bingham <koorogi@koorogi.info>
Cc: Paul Mundt <paul.mundt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:52 -07:00
Bobby Bingham abafe5d9b0 sh: push extra copy of r0-r2 for syscall parameters
When invoking syscall handlers on sh32, the saved userspace registers
are at the top of the stack.  This seems to have been intentional, as it
is an easy way to pass r0, r1, ...  to the handler as parameters 5, 6,
...

It causes problems, however, because the compiler is allowed to generate
code for a function which clobbers that function's own parameters.  For
example, gcc generates the following code for clone:

    <SyS_clone>:
        mov.l   8c020714 <SyS_clone+0xc>,r1  ! 8c020540 <do_fork>
        mov.l   r7,@r15
        mov     r6,r7
        jmp     @r1
        mov     #0,r6
        nop
        .word 0x0540
        .word 0x8c02

The `mov.l r7,@r15` clobbers the saved value of r0 passed from
userspace.  For most system calls, this might not be a problem, because
we'll be overwriting r0 with the return value anyway.  But in the case
of clone, copy_thread will need the original value of r0 if the
CLONE_SETTLS flag was specified.

The first patch in this series fixes this issue for system calls by
pushing to the stack and extra copy of r0-r2 before invoking the
handler.  We discard this copy before restoring the userspace registers,
so it is not a problem if they are clobbered.

Exception handlers also receive the userspace register values in a
similar manner, and may hit the same problem.  The second patch removes
the do_fpu_error handler, which looks susceptible to this problem and
which, as far as I can tell, has not been used in some time.  The third
patch addresses other exception handlers.

This patch (of 3):

The userspace registers are stored at the top of the stack when the
syscall handler is invoked, which allows r0-r2 to act as parameters 5-7.
Parameters passed on the stack may be clobbered by the syscall handler.
The solution is to push an extra copy of the registers which might be
used as syscall parameters to the stack, so that the authoritative set
of saved register values does not get clobbered.

A few system call handlers are also updated to get the userspace
registers using current_pt_regs() instead of from the stack.

Signed-off-by: Bobby Bingham <koorogi@koorogi.info>
Cc: Paul Mundt <paul.mundt@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:52 -07:00
Matt Fleming a0c32761e7 sh: fix format string bug in stack tracer
Kees reported the following error:

   arch/sh/kernel/dumpstack.c: In function 'print_trace_address':
   arch/sh/kernel/dumpstack.c:118:2: error: format not a string literal and no format arguments [-Werror=format-security]

Use the "%s" format so that it's impossible to interpret 'data' as a
format string.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Reported-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:20:49 -07:00
Linus Torvalds 68114e5eb8 Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added.
 
 Uprobes now work with event triggers and multi buffers.
 Uprobes have support under ftrace and perf.
 
 The big feature is that the function tracer can now be used within the
 multi buffer instances. That is, you can now trace some functions
 in one buffer, others in another buffer, all functions in a third buffer
 and so on. They are basically agnostic from each other. This only
 works for the function tracer and not for the function graph trace,
 although you can have the function graph tracer running in the top level
 buffer (or any tracer for that matter) and have different function tracing
 going on in the sub buffers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTOthtAAoJEKQekfcNnQGu5c8H/Ana/U+0tmksp1dbHkRHsKSH
 +Fsv4Jeu8gf1NaFKHEhkUTcFtnzE6qAPV2VCrcJwXbhAhhwZm+LjrnWdoy3215S3
 cQW4LftLEonh2cM36Cos74TulMEYN6XmL6dQZV+CILKQkDrWU4qJjQ64okXEkqrd
 9iG3p/mSXyvJcmnyg61ALnMOhZDLsXY3djBhWBPhiTPGS6BRb9zh4Pmw6Zv0n2rJ
 U93Gt/3AQrv1ybu73dUxqP0abp60oXOiWoF/R2jcbKqIM+K9RPJX79unCV3jq3u9
 f+6jMlB9PgAMqQj6ihJdwxKDDuzwyrVdEPnsgvl4jarCBCtVVwhKedBaKN/KS8k=
 =HdXY
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Most of the changes were largely clean ups, and some documentation.
  But there were a few features that were added:

  Uprobes now work with event triggers and multi buffers and have
  support under ftrace and perf.

  The big feature is that the function tracer can now be used within the
  multi buffer instances.  That is, you can now trace some functions in
  one buffer, others in another buffer, all functions in a third buffer
  and so on.  They are basically agnostic from each other.  This only
  works for the function tracer and not for the function graph trace,
  although you can have the function graph tracer running in the top
  level buffer (or any tracer for that matter) and have different
  function tracing going on in the sub buffers"

* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Add BUG_ON when stack end location is over written
  tracepoint: Remove unused API functions
  Revert "tracing: Move event storage for array from macro to standalone function"
  ftrace: Constify ftrace_text_reserved
  tracepoints: API doc update to tracepoint_probe_register() return value
  tracepoints: API doc update to data argument
  ftrace: Fix compilation warning about control_ops_free
  ftrace/x86: BUG when ftrace recovery fails
  ftrace: Warn on error when modifying ftrace function
  ftrace: Remove freelist from struct dyn_ftrace
  ftrace: Do not pass data to ftrace_dyn_arch_init
  ftrace: Pass retval through return in ftrace_dyn_arch_init()
  ftrace: Inline the code from ftrace_dyn_table_alloc()
  ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
  tracing: Evaluate len expression only once in __dynamic_array macro
  tracing: Correctly expand len expressions from __dynamic_array macro
  tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
  tracing: Fix event header migrate.h to include tracepoint.h
  tracing: Fix event header writeback.h to include tracepoint.h
  tracing: Warn if a tracepoint is not set via debugfs
  ...
2014-04-03 10:26:31 -07:00
Linus Torvalds 683b6c6f82 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq code updates from Thomas Gleixner:
 "The irq department proudly presents:

   - Another tree wide sweep of irq infrastructure abuse.  Clear winner
     of the trainwreck engineering contest was:
         #include "../../../kernel/irq/settings.h"

   - Tree wide update of irq_set_affinity() callbacks which miss a cpu
     online check when picking a single cpu out of the affinity mask.

   - Tree wide consolidation of interrupt statistics.

   - Updates to the threaded interrupt infrastructure to allow explicit
     wakeup of the interrupt thread and a variant of synchronize_irq()
     which synchronizes only the hard interrupt handler.  Both are
     needed to replace the homebrewn thread handling in the mmc/sdhci
     code.

   - New irq chip callbacks to allow proper support for GPIO based irqs.
     The GPIO based interrupts need to request/release GPIO resources
     from request/free_irq.

   - A few new ARM interrupt chips.  No revolutionary new hardware, just
     differently wreckaged variations of the scheme.

   - Small improvments, cleanups and updates all over the place"

I was hoping that that trainwreck engineering contest was a April Fools'
joke.  But no.

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
  irqchip: sun7i/sun6i: Disable NMI before registering the handler
  ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller
  ARM: sun7i/sun6i: irqchip: Update the documentation
  ARM: sun7i/sun6i: dts: Add NMI irqchip support
  ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller
  genirq: Export symbol no_action()
  arm: omap: Fix typo in ams-delta-fiq.c
  m68k: atari: Fix the last kernel_stat.h fallout
  irqchip: sun4i: Simplify sun4i_irq_ack
  irqchip: sun4i: Use handle_fasteoi_irq for all interrupts
  genirq: procfs: Make smp_affinity values go+r
  softirq: Add linux/irq.h to make it compile again
  m68k: amiga: Add linux/irq.h to make it compile again
  irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0
  irqchip: sun4i: Fix a comment about mask register initialization
  irqchip: sun4i: Fix irq 0 not working
  genirq: Add a new IRQCHIP_EOI_THREADED flag
  genirq: Document IRQCHIP_ONESHOT_SAFE flag
  ARM: sunxi: dt: Convert to the new irq controller compatibles
  irqchip: sunxi: Change compatibles
  ...
2014-04-01 11:22:57 -07:00
Thomas Gleixner ffb12cf002 Merge branch 'irq/for-gpio' into irq/core
Merge the request/release callbacks which are in a separate branch for
consumption by the gpio folks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-12 16:01:07 +01:00
Ingo Molnar a02ed5e3e0 Merge branch 'sched/urgent' into sched/core
Pick up fixes before queueing up new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-11 11:34:27 +01:00
Jiri Slaby 3a36cb11ca ftrace: Do not pass data to ftrace_dyn_arch_init
As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.

Note the documentation was imprecise as it did not suggest to set
(*data) to 0.

Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:14 -05:00
Jiri Slaby af64a7cb09 ftrace: Pass retval through return in ftrace_dyn_arch_init()
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.

Note there is also "return 0" in every ftrace_dyn_arch_init.  So it is
enough to check the retval and remove all the indirect sets of data on
all archs.

Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz

Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:13 -05:00
Thomas Gleixner 6decf1a33c sh: Use irq_set_affinity instead of homebrewn code
There is no point in having an incomplete copy of irq_set_affinity()
for the hotplug irq migration code.

Use the core function instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: sh <linux-sh@vger.kernel.org>
Link: http://lkml.kernel.org/r/20140223212736.774961401@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-04 17:37:55 +01:00
Geert Uytterhoeven a5f6ea29f9 sh: prefix sh-specific "CCR" and "CCR2" by "SH_"
Commit bcf24e1daa ("mmc: omap_hsmmc: use the generic config for
omap2plus devices"), enabled the build for other platforms for compile
testing.

sh-allmodconfig now fails with:

    include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant
    make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1

This happens because SuperH #defines "CCR", which is one of the enum
values in include/linux/omap-dma.h.  There's a similar issue with "CCR2"
on sh2a.

As "CCR" and "CCR2" are too generic names for global #defines, prefix
them with "SH_" to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04 07:55:49 -08:00
Nicolas Pitre f0c5cdb5cf sched/idle, SH: Remove redundant cpuidle_idle_call()
The core idle loop now takes care of it.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-sh@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linaro-kernel@lists.linaro.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-v2c3oswyd80xk2vh7fwmu6r8@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-11 09:58:26 +01:00
Linus Torvalds 3aacd625f2 Merge branch 'akpm' (incoming from Andrew)
Merge second patch-bomb from Andrew Morton:
 - various misc bits
 - the rest of MM
 - add generic fixmap.h, use it
 - backlight updates
 - dynamic_debug updates
 - printk() updates
 - checkpatch updates
 - binfmt_elf
 - ramfs
 - init/
 - autofs4
 - drivers/rtc
 - nilfs
 - hfsplus
 - Documentation/
 - coredump
 - procfs
 - fork
 - exec
 - kexec
 - kdump
 - partitions
 - rapidio
 - rbtree
 - userns
 - memstick
 - w1
 - decompressors

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (197 commits)
  lib/decompress_unlz4.c: always set an error return code on failures
  romfs: fix returm err while getting inode in fill_super
  drivers/w1/masters/w1-gpio.c: add strong pullup emulation
  drivers/memstick/host/rtsx_pci_ms.c: fix ms card data transfer bug
  userns: relax the posix_acl_valid() checks
  arch/sh/kernel/dwarf.c: use rbtree postorder iteration helper instead of solution using repeated rb_erase()
  fs-ext3-use-rbtree-postorder-iteration-helper-instead-of-opencoding-fix
  fs/ext3: use rbtree postorder iteration helper instead of opencoding
  fs/jffs2: use rbtree postorder iteration helper instead of opencoding
  fs/ext4: use rbtree postorder iteration helper instead of opencoding
  fs/ubifs: use rbtree postorder iteration helper instead of opencoding
  net/netfilter/ipset/ip_set_hash_netiface.c: use rbtree postorder iteration instead of opencoding
  rbtree/test: test rbtree_postorder_for_each_entry_safe()
  rbtree/test: move rb_node to the middle of the test struct
  rapidio: add modular rapidio core build into powerpc and mips branches
  partitions/efi: complete documentation of gpt kernel param purpose
  kdump: add /sys/kernel/vmcoreinfo ABI documentation
  kdump: fix exported size of vmcoreinfo note
  kexec: add sysctl to disable kexec_load
  fs/exec.c: call arch_pick_mmap_layout() only once
  ...
2014-01-23 19:11:50 -08:00
Linus Torvalds 0ba3307a8e ARM: driver updates for 3.14
Updates of SoC-near drivers and other driver updates that makes more sense to
 take through our tree.
 
 The largest part of this is a conversion of device registration for some
 renesas shmobile/sh devices over to use resources. This has required
 coordination with the corresponding arch/sh changes, and we've agreed
 to merge the arch/sh changes through our tree.
 
 Added in this branch is support for Trusted Foundations secure firmware,
 which is what is used on many of the commercial Nvidia Tegra products
 that are in the market, including the Nvidia Shield. The code is local
 to arch/arm at this time since it's uncertain whether it will be shared
 with arm64 longer-term, if needed we will refactor later.
 
 A couple of new RTC drivers used on ARM boards, merged through our tree
 on request by the RTC maintainer.
 
 ... plus a bunch of smaller updates across the board, gpio conversions
 for davinci, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4ViqAAoJEIwa5zzehBx3m4QP/07VXVE77RFRyly5Bky5AaMY
 zo7ZpoJyg/IT9lxtSAQDhbQq49tKZQVS16oJ7LWXzjAyCY9XrVDX2IkcuqudmYSy
 Xtx+R0jZGK4czqljgjwdHgNCSwugCmO/kgNY3h8ar53dTmGIFiq5boPeMDizRTGD
 g3sgYuQbIqepcHd2jUjJSBXNyvZIlwBJ4wDyZgxRfzyM7unS8T46BpYNJz0esAL+
 0DwIk0nv1eJ6LI0aEL+7bgFaitjUNLpcrroToi1IiIEJuTvZY4AuBjAKt5/181zL
 i1ugimsHahmbwNclAmUimc0rtW4Nn+YHGa8WpYiQ9O7+kPFsYkfLRplHPOjaUBPz
 r76ucgBMGH6i04tvstwlONznO4NhkACWmb4wrfJfRoDTglELLoOd6QGAYKyRublH
 SnrKKmuXzBvtmj2zgUU+S0ka9LdYrjzxoSYprrXQpDr89pUs/AZrlAm9yRjQ3hGw
 0eL9UsDFtYAQwCQtPvin2bjKRgNNDbgdwNYNbA7n8jvE/uZ4rlYr3Ot+oxdfs75e
 K4fY6JwtbZxQVcOU25M3WBYXLl0V61ZISFa16XhYC2hjzgMZ3bfmFUn+TW9C8V4V
 03QqtFyT3FP+VfA3QUS3PuBxALT0HWXmDqp0VJc6UCiXX2InWR+uZQp7a30EawOZ
 WHLqgf+nT3bD3kfagCZN
 =JJlw
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.

  The largest part of this is a conversion of device registration for
  some renesas shmobile/sh devices over to use resources.  This has
  required coordination with the corresponding arch/sh changes, and
  we've agreed to merge the arch/sh changes through our tree.

  Added in this branch is support for Trusted Foundations secure
  firmware, which is what is used on many of the commercial Nvidia Tegra
  products that are in the market, including the Nvidia Shield.  The
  code is local to arch/arm at this time since it's uncertain whether it
  will be shared with arm64 longer-term, if needed we will refactor
  later.

  A couple of new RTC drivers used on ARM boards, merged through our
  tree on request by the RTC maintainer.

  ... plus a bunch of smaller updates across the board, gpio conversions
  for davinci, etc"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
  watchdog: davinci: rename platform driver to davinci-wdt
  tty: serial: Limit msm_serial_hs driver to platforms that use it
  mmc: msm_sdcc: Limit driver to platforms that use it
  usb: phy: msm: Move mach dependent code to platform data
  clk: versatile: fixup IM-PD1 clock implementation
  clk: versatile: pass a name to ICST clock provider
  ARM: integrator: pass parent IRQ to the SIC
  irqchip: versatile FPGA: support cascaded interrupts from DT
  gpio: davinci: don't create irq_domain in case of unbanked irqs
  gpio: davinci: use chained_irq_enter/chained_irq_exit API
  gpio: davinci: add OF support
  gpio: davinci: remove unused variable intc_irq_num
  gpio: davinci: convert to use irqdomain support.
  gpio: introduce GPIO_DAVINCI kconfig option
  gpio: davinci: get rid of DAVINCI_N_GPIO
  gpio: davinci: use {readl|writel}_relaxed() instead of __raw_*
  serial: sh-sci: Add OF support
  serial: sh-sci: Add device tree bindings documentation
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Remove platform data scbrr_algo_id field
  ...
2014-01-23 18:49:36 -08:00
Cody P Schafer e376ed7c85 arch/sh/kernel/dwarf.c: use rbtree postorder iteration helper instead of solution using repeated rb_erase()
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of using repeated rb_erase() calls

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:37:03 -08:00
Tang Chen e7e8de5918 memblock: make memblock_set_node() support different memblock_type
[sfr@canb.auug.org.au: fix powerpc build]
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Chen Tang <imtangchen@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Liu Jiang <jiang.liu@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:44 -08:00
Wanlong Gao 53a52f17d9 arch/sh/kernel/kgdb.c: add missing #include <linux/sched.h>
arch/sh/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs':
  arch/sh/kernel/kgdb.c:225:32: error: implicit declaration of function 'task_stack_page' [-Werror=implicit-function-declaration]
  arch/sh/kernel/kgdb.c:242:23: error: dereferencing pointer to incomplete type
  arch/sh/kernel/kgdb.c:243:22: error: dereferencing pointer to incomplete type
  arch/sh/kernel/kgdb.c: In function 'singlestep_trap_handler':
  arch/sh/kernel/kgdb.c:310:27: error: 'SIGTRAP' undeclared (first use in this function)
  arch/sh/kernel/kgdb.c:310:27: note: each undeclared identifier is reported only once for each function it appears in

This was introduced by commit 16559ae48c ("kgdb: remove #include
<linux/serial_8250.h> from kgdb.h").

[geert@linux-m68k.org: reworded and reformatted]
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:42 -08:00
Nobuhiro Iwamatsu ad70b029d2 sh: add EXPORT_SYMBOL(min_low_pfn) and EXPORT_SYMBOL(max_low_pfn) to sh_ksyms_32.c
Min_low_pfn and max_low_pfn were used in pfn_valid macro if defined
CONFIG_FLATMEM.  When the functions that use the pfn_valid is used in
driver module, max_low_pfn and min_low_pfn is to undefined, and fail to
build.

  ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
  ERROR: "max_low_pfn" [drivers/block/aoe/aoe.ko] undefined!
  make[2]: *** [__modpost] Error 1
  make[1]: *** [modules] Error 2

This patch fix this problem.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02 14:40:30 -08:00
Laurent Pinchart d5917ef318 sh: Don't set plat_sci_port scbrr_algo_id field
The field will be removed from the sh-sci driver. Don't set it and let
the driver handle baud rate calculation internally.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 21:49:43 +09:00
Laurent Pinchart 64c535e942 sh: sh772[34]: Set serial port sampling rate to 8 for SCIFA ports
SCIFA ports on sh7723 and sh7724 seem to use a sampling rate of half the
value specified in the datasheet. This is currently handled by a custom
baud rate calculation algorithm. The algorithm ID will be removed from
platform data, set the sampling rate directly instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 21:49:43 +09:00
Laurent Pinchart d850acf975 sh: Declare SCIF register base and IRQ as resources
Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24 21:49:43 +09:00
Linus Torvalds 4007162647 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Ingo Molnar:
 "This is a multi-arch cleanup series from Thomas Gleixner, which we
  kept to near the end of the merge window, to not interfere with
  architecture updates.

  This series (motivated by the -rt kernel) unifies more aspects of IRQ
  handling and generalizes PREEMPT_ACTIVE"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Make PREEMPT_ACTIVE generic
  sparc: Use preempt_schedule_irq
  ia64: Use preempt_schedule_irq
  m32r: Use preempt_schedule_irq
  hardirq: Make hardirq bits generic
  m68k: Simplify low level interrupt handling code
  genirq: Prevent spurious detection for unconditionally polled interrupts
2013-11-19 10:40:00 -08:00
Thomas Gleixner 00d1a39e69 preempt: Make PREEMPT_ACTIVE generic
No point in having this bit defined by architecture.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130917183629.090698799@linutronix.de
2013-11-13 20:21:47 +01:00
Vineet Gupta 616c05d110 sh: move fpu_counter into ARCH specific thread_struct
Only a couple of arches (sh/x86) use fpu_counter in task_struct so it can
be moved out into ARCH specific thread_struct, reducing the size of
task_struct for other arches.

Compile tested sh defconfig + sh4-linux-gcc (4.6.3)

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Paul Mundt <paul.mundt@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:13 +09:00
Chen Gang 8d28df813e sh64: kernel: remove useless variable 'regs'
Remove useless variable 'regs' to avoid the related warnings (warning is
treated as error).

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:08:59 +09:00
Chen Gang 42b43341b0 sh64: kernel: use 'usp' instead of 'fn'
'fn' is not defined, according to the implementation copy_thread() in
'sh32', need use 'usp' instead of.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:08:59 +09:00
Frederic Weisbecker 7d65f4a655 irq: Consolidate do_softirq() arch overriden implementations
All arch overriden implementations of do_softirq() share the following
common code: disable irqs (to avoid races with the pending check),
check if there are softirqs pending, then execute __do_softirq() on
a specific stack.

Consolidate the common parts such that archs only worry about the
stack switch.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
2013-10-01 12:53:25 +02:00
Linus Torvalds cc998ff881 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...
2013-09-05 14:54:29 -07:00
Sergei Shtylyov 0bf2bbd277 SH7619: fix typo in Ether platform data
Commit 06a64f91da (SH7619: fix Ether support)  has
a typo in the 'phy_interface' field name of the platform data which causes build
error -- fix it.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-22 14:32:18 -07:00
Sergei Shtylyov 8d3214c4e8 sh_eth: remove 'register_type' field from 'struct sh_eth_plat_data'
Now that the 'register_type' field of the 'sh_eth' driver's platform data is not
used by the driver anymore, it's time to remove it and  its initializers from
the SH platform code. Also  move *enum* declaring values for this  field from
<linux/sh_eth.h>  to  the  local driver's  header file as they're only needed
by the driver itself  now...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 17:10:41 -07:00
Sergei Shtylyov 06a64f91da SH7619: fix Ether support
The 'sh_eth' driver's probe will crash as the platform code is hopelessly behind
the platform data -- it passes PHY ID instead of 'struct sh_eth_plat_data *'.
Strangely, both commit d88a3ea6fa (SH7619 add ethernet controler support) that
added the platform code and commit 71557a37ad ([netdrvr] sh_eth: Add  SH7619
support)  were done  in about  the same time, yet the latter one added 'struct
sh_eth_plat_data' and the platform code didn't ever get updated...

Add the proper platform data and fix off-by-one memory resource end error, while
at it...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-20 17:10:40 -07:00
Geert Uytterhoeven c78e43601b SH: cpuidle: Add missing parameter for cpuidle_register()
arch/sh/kernel/cpu/shmobile/cpuidle.c: In function 'sh_mobile_setup_cpuidle':
arch/sh/kernel/cpu/shmobile/cpuidle.c:102:2: error: too few arguments to function 'cpuidle_register'
include/linux/cpuidle.h:129:12: note: declared here
arch/sh/kernel/cpu/shmobile/cpuidle.c:94:6: warning: unused variable 'ret' [-Wunused-variable]

Add the missing parameter, and remove the unused variable.

Both introduced by commit b181a3b03f ("SH:
cpuidle: use init/exit common routine").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-08-12 11:28:18 +02:00
Paul Gortmaker 4603f53a1d sh: delete __cpuinit usage from all sh files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/sh uses of the __cpuinit macros from
all C files.  Currently sh does not have any __CPUINIT used in
assembly files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:53 -04:00