Commit Graph

207 Commits

Author SHA1 Message Date
Greg Ungerer 10c1f71caa [PATCH] m68knommu: need pm_power_off in m68knommu
Need place holders for the power management power off and idle functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-07 16:16:53 -08:00
Al Viro 513091ba7e [PATCH] m68knommu: task_stack_page()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:55 -08:00
Greg Ungerer 694d855fbc [PATCH] m68knommu: fix ram length of m5208evb board
Adjust length of M5208EVB ram define.  It should size up to 32MB after
adding in the dBUG reserved 128k.

Problem pointed out be Milton Miller <miltonm@bga.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 09:31:27 -08:00
Greg Ungerer 01829e7212 [PATCH] m68knommu: fix a5 reg corruption in signal handlers
This is a patch adapted from a posting by Andrea Tarani which was
pointed out to me by Bernardo Innocenti.  Thanks to both of them for
their help and patience.

The original posting is here:
  http://mailman.uclinux.org/pipermail/uclinux-dev/2005-July/033543.html

The problem first manifest itself as busybox ping terminating with an
"Illegal instruction".  I reduced this to a test case and found that
variable size arrays allocated on the stack could lead to stacks not
aligned on 32 bit boundaries.  For the Coldfire this proved fatal.

Having been pointed out this patch by Bernardo, I applied it and it
fixed the first test case.  I then went back to busybox's ping.  This
still failed with "Illegal instruction", but in a different way.  Before
it depended on the size allocated for the ping buffer, now it happened
every time.  I also found it depended on optimisation level (gcc-3.4.0)
-Os was okay but not -O2.

After a lot of looking, it turned out that register a5 was being
corrupted by the signal handler (after applying the patch).  I re-worked
the patch a bit to save/restore a5 and now all seems well.

Patch submitted by Stuart Hughs <stuarth@freescale.com>

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 09:31:26 -08:00
Greg Ungerer afc7cd8950 [PATCH] m68knommu: fix mangled 'truct' in ptrace.c
Fix broken "truct" -> "struct" in arch_ptrace() parameter list.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 09:31:26 -08:00
Greg Ungerer db10cb8e99 [PATCH] m68knommu: don't set gcc optimizer flags
Don't specify compiler optimization flags in the m68knommu Makefile.
Let the top level Makefile/config set it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 09:31:26 -08:00
akpm@osdl.org df2e71fb91 [PATCH] dump_thread() cleanup
)

From: Adrian Bunk <bunk@stusta.de>

- create one common dump_thread() prototype in kernel.h

- dump_thread() is only used in fs/binfmt_aout.c and can therefore be
  removed on all architectures where CONFIG_BINFMT_AOUT is not
  available

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:25 -08:00
Matt Mackall e585e47031 [PATCH] tiny: Make *[ug]id16 support optional
Configurable 16-bit UID and friends support

This allows turning off the legacy 16 bit UID interfaces on embedded platforms.

   text    data     bss     dec     hex filename
3330172  529036  190556 4049764  3dcb64 vmlinux-baseline
3328268  529040  190556 4047864  3dc3f8 vmlinux

From: Adrian Bunk <bunk@stusta.de>

    UID16 was accidentially disabled for !EMBEDDED.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:14:11 -08:00
Christoph Hellwig 3258891825 [PATCH] m68knommu: enable_irq/disable_irq
mach_enable_irq/mach_disable_irq are never actually set, so let's remove
them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:44 -08:00
Greg Ungerer 2ed5e6d09e [PATCH] m68knommu: move some platform irq support out of irq.h
Move some of the m68knommu platform specific irq core support
to its own header, irqnode.h. Having it in asm-m68knommu/irq.h
causes some build pain, since it is included in a number of
common code places (and not all the required definitions will
be included at these places).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:47 -08:00
Greg Ungerer 4e51f67458 [PATCH] m68knommu: add ColdFire 5208 configure support
Added support for the new Freescale 5208 ColdFire processor.
Also changed name "Motorola" to new company name "Freescale".

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:47 -08:00
Greg Ungerer 124df2df0c [PATCH] m68knommu: align param section and add 5208EVB linker support
Align the param section. It can end up starting on an unalingned
boundary depending on the size of ksymtab_strings. If it is
unaligned things like modules will fail to load with unaligned
access traps.

Add linker scipt support for the M5208EVB board.
Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00
Greg Ungerer 5b3d98bb7f [PATCH] m68knommu: handle non base address 0 memory of M5208EVB board
The Freescale M5208EVB ColdFire eval board is one of the few that
doesn't have its DRAM based at address 0. Handle this special case
in the common ColdFire startup code.

Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00
Greg Ungerer f15bf19b49 [PATCH] m68knommu: modify the ColdFire PIT timer for new 5208
Modified common ColdFire PIT timer code to support the 5208 as well.
It uses a different set of mask and interrupt bits than other ColdFire
processors. The defines for these bits have been moved in header
files and set appropriately for the different processor varients.
Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00
Greg Ungerer 88a605b024 [PATCH] m68knommu: platform config code for 5208 ColdFire
Platform configuration code for the Freescale 5208 ColdFire processor.
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00
Greg Ungerer 9ed8a0d6c8 [PATCH] m68knommu: add ColdFire 5208 and M5208EVB build support
Add build support for the new Freescale 5208 ColdFire processor,
and its M5208EVB eval board. Patch originally from Matt Waddel.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00
Greg Ungerer 3aec6fe2a2 [PATCH] m68knommu: use the ColdFire PIT timer for new 5208
The Freescale 5208 ColdFire uses the common PIT timer code for
its internal timer. Build it when configured for the 5208 processor.
Add support for the internal register map of the 5208 ColdFire fmaily.
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00
Greg Ungerer 9c899990ba [PATCH] m68knommu: add 5208 ColdFire platform Makefile
Add Freescale 5208 ColdFire platform Makefile.
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:46 -08:00
Greg Ungerer 54b03d133b [PATCH] m68knommu: add ColdFire 5208 setup support
Add setup support for the new Freescale 5208 ColdFire processor.
(Also fixed a little typo in there, "UNKOWN" -> "UNKNOWN").
Patch originally from Matt Waddel (from code originally written by
Mike Lavender).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 08:00:45 -08:00
Christoph Hellwig 481bed4542 [PATCH] consolidate sys_ptrace()
The sys_ptrace boilerplate code (everything outside the big switch
statement for the arch-specific requests) is shared by most architectures.
This patch moves it to kernel/ptrace.c and leaves the arch-specific code as
arch_ptrace.

Some architectures have a too different ptrace so we have to exclude them.
They continue to keep their implementations.  For sh64 I had to add a
sh64_ptrace wrapper because it does some initialization on the first call.
For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but
SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-By: David Howells <dhowells@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:42 -08:00
Greg Ungerer b30db61b9b [PATCH] m68knommu: updated defconfig
Updated m68knommu defconfig. Part of changing the "Motorola" names
to their new name "Freescale".

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01 21:41:19 -08:00
Thomas Gleixner ecea8d19c9 [PATCH] jiffies_64 cleanup
Define jiffies_64 in kernel/timer.c rather than having 24 duplicated
defines in each architecture.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:25 -08:00
Christoph Hellwig dfb7dac3af [PATCH] unify sys_ptrace prototype
Make sure we always return, as all syscalls should.  Also move the common
prototype to <linux/syscalls.h>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:20 -08:00
Greg Ungerer 9f5757476d [PATCH] m68knommu: startup code for the Drangen Engine 68328 based board
Specialized startup code for the 68328 based DragenEngine board.
It doesn't easily fit into the common 68x328 startup code framework.
It doesn't want any of the common hardware setup to be done here.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 20:04:15 -07:00
Greg Ungerer 81d4903d2d [PATCH] m68knommu: common RAM based 68360 startup code
Create common start code for all 68360 based platforms that are
loaded and run directly from RAM (as opposed to running from
flash/ROM). This replaces the old specific startup code for
each board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11 20:43:47 -07:00
Greg Ungerer 42ae766fff [PATCH] m68knommu: common ROM/flash based 68360 startup code
Create common start code for all 68360 based platforms that are
loaded and run directly from ROM/flash (as opposed to running from
RAM). This replaces the old specific startup code for each board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11 20:43:46 -07:00
Linus Torvalds 486a153f0e Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild 2005-09-09 15:46:49 -07:00
Sam Ravnborg cca6e6f5f4 kbuild: h8300,m68knommu,sh,sh64 use generic asm-offsets.h support
h8300, m68knommu, sh and sh64 all used the name asm-offsets.h so minimal
changes required.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09 20:28:49 +02:00
Greg Ungerer 03981f2427 [PATCH] m68knommu: extract common timer code for 68EZ328 processor
Rework the 68x328 configuration and setup code. All 68x328 varients
share the same timer hardware. So extract that into its own file,
instead of keeping copies in each processors setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer 75003c4812 [PATCH] m68knommu: create common timer code for 68x328 processor varients
Create common timer code for all 68x328 processor varients.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer a79626604b [PATCH] m68knommu: register map setup for MOD5272 board
The boot loader on the MOD5272 board doesn't set the register maping,
so set it in the 5272 init code. There was code in there to support
this, but we had never needed to use it before.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer a052b7affc [PATCH] m68knommu: add timer support for the 523x ColdFire processor family
Add timer support for the ColdFire 523x processor family.
(It uses the ColdFire PIT timer hardware, so we just build that in).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer ee721126ca [PATCH] m68knommu: extract common timer code for 68328 processor
Rework the 68x328 configuration and setup code. All 68x328 varient
share the same timer hardware, so extract that into its own file,
instead of keeping copies in each processors setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 8c2b58ce71 [PATCH] m68knommu: create common config code for all 68VZ328 platforms
Create common 68VZ328 config code. It is essentially the same for
all boards that use this, so no point having a version of it for
each.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 55f37debf7 [PATCH] m68knommu: remove DrangonEngine2 specific config code
Remove DragonEngine2 specific config code. Use common 68VZ328 config
code now.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 58201a2d03 [PATCH] m68knommu: remove uCdimm specific config code
Remove uCdimm specific config code. Use common 68VZ328 config code now.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 97591b2c76 [PATCH] m68knommu: 523x ColdFire processor init/config Makefile
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:35 -07:00
john stultz b149ee2233 [PATCH] NTP: ntp-helper functions
This patch cleans up a commonly repeated set of changes to the NTP state
variables by adding two helper inline functions:

ntp_clear(): Clears the ntp state variables

ntp_synced(): Returns 1 if the system is synced with a time server.

This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc,
sparc64.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 16:57:34 -07:00
Linus Torvalds ef88b7dba2 Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild 2005-09-06 00:35:51 -07:00
Greg Ungerer 03a002e783 [PATCH] m68knommu: update defconfig for m68knommu
Updated defconfig for m68knommu arch.
Patch originaly submitted by Jan Dittmer <jdittmer@ppp0.net>

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:30 -07:00
Greg Ungerer 4945b30291 [PATCH] m68knommu: new board support in linker script
. add support for the M5235EVB board
. add support for the SOM5282 board
. add support for the MOD5272 board
. fix end of memory define for eLITE board

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:30 -07:00
Greg Ungerer 8410a54676 [PATCH] m68knommu: use THREAD_SIZE instead of hard coded size
Use the THREAD_SIZE define when manipulating the stack instead of
hard coded values (for the 68328 and 68360 sub-architectures).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:30 -07:00
Greg Ungerer 5c4dbba9fc [PATCH] m68knommu: new family (523x) and board config support
New architecture and board configuration support for m68knommu.

. add 523x ColdFire support
. add support for SOM5282 and MOD5272 boards
. break up the 527x to be separate 5271 and 5275. There is some
  subtle differences that (like RAM config) that need to be dealt with
. add option to support selecting 4k kernel stack

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:30 -07:00
Greg Ungerer 777354b63f [PATCH] m68knommu: 523x ColdFire processor support in arch Makefile
Add support for the 523x ColdFire family of processors

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:30 -07:00
Greg Ungerer db81fb8486 [PATCH] m68knommu: cleanup showstack()
Make show_stack() consistent with other architectures.
Put the vector string names in the .rodata section.
Patch originally submitted by Philippe De Muyter <phdm@macqel.be>.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:30 -07:00
Greg Ungerer 029fc1375f [PATCH] m68knommu: fix ColdFire startup code to properly handle non 0 based ram
Correctly determine the end of ram for ram setups that do not
start at base address of 0. Add support for the MOD5272 board,
which doesn not have a ram base of 0.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:29 -07:00
Greg Ungerer e6070a1712 [PATCH] m68knommu: new family (523x) and board setup
. setup for the new 523x ColdFire family
. break up of 527x to be 5271 and 5275
. some white space cleanup

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:29 -07:00
Greg Ungerer b5aaf3f71c [PATCH] m68knommu: 523x ColdFire processor init code
Low level initialization code for the 523x ColdFire processor family.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:29 -07:00
Steven Rostedt 69be8f1896 [PATCH] convert signal handling of NODEFER to act like other Unix boxes.
It has been reported that the way Linux handles NODEFER for signals is
not consistent with the way other Unix boxes handle it.  I've written a
program to test the behavior of how this flag affects signals and had
several reports from people who ran this on various Unix boxes,
confirming that Linux seems to be unique on the way this is handled.

The way NODEFER affects signals on other Unix boxes is as follows:

1) If NODEFER is set, other signals in sa_mask are still blocked.

2) If NODEFER is set and the signal is in sa_mask, then the signal is
still blocked. (Note: this is the behavior of all tested but Linux _and_
NetBSD 2.0 *).

The way NODEFER affects signals on Linux:

1) If NODEFER is set, other signals are _not_ blocked regardless of
sa_mask (Even NetBSD doesn't do this).

2) If NODEFER is set and the signal is in sa_mask, then the signal being
handled is not blocked.

The patch converts signal handling in all current Linux architectures to
the way most Unix boxes work.

Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.

* NetBSD was the only other Unix to behave like Linux on point #2. The
main concern was brought up by point #1 which even NetBSD isn't like
Linux.  So with this patch, we leave NetBSD as the lonely one that
behaves differently here with #2.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29 10:03:11 -07:00
Eric W. Biederman 59586e5a26 [PATCH] Don't export machine_restart, machine_halt, or machine_power_off.
machine_restart, machine_halt and machine_power_off are machine
specific hooks deep into the reboot logic, that modules
have no business messing with.  Usually code should be calling
kernel_restart, kernel_halt, kernel_power_off, or
emergency_restart. So don't export machine_restart,
machine_halt, and machine_power_off so we can catch buggy users.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-26 14:35:42 -07:00
Sam Ravnborg 7c6b155fb4 kbuild: drop descend - converting existing users
There was only two users left of descend. Fix them so they
use $(clean)= and $(build)=.
Drop definition of descend.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
2005-07-25 12:51:08 +00:00
Sam Ravnborg d5950b4355 [NET]: add a top-level Networking menu to *config
Create a new top-level menu named "Networking" thus moving
net related options and protocol selection way from the drivers
menu and up on the top-level where they belong.

To implement this all architectures has to source "net/Kconfig" before
drivers/*/Kconfig in their Kconfig file. This change has been
implemented for all architectures.

Device drivers for ordinary NIC's are still to be found
in the Device Drivers section, but Bluetooth, IrDA and ax25
are located with their corresponding menu entries under the new
networking menu item.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-07-11 21:03:49 -07:00
Dave Hansen 3f22ab276b [PATCH] make each arch use mm/Kconfig
For all architectures, this just means that you'll see a "Memory Model"
choice in your architecture menu.  For those that implement DISCONTIGMEM,
you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool
y" and make your users select DISCONTIGMEM right out of the new choice
menu.  The only disadvantage might be if you have some specific things that
you need in your help option to explain something about DISCONTIGMEM.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:02 -07:00
Greg Ungerer b05a720b37 [PATCH] m68knommu: fix scheduling and race problems in idle loop
Re-work the m68knommu specific idle code according to suggestions
from Nick Piggin <nickpiggin@yahoo.com.au>.

A couple of rules that we need to follow:

1. Preempt should now disabled over idle routines. Should only be enabled
to call schedule() then disabled again.

3. When cpu_idle finds (need_resched() == 'true'), it should call schedule().
It should not call schedule() otherwise.

Also fix interrupt locking around the need_resched() and cpu stop state
so that there is no race condition.

Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-03 08:16:17 -07:00
Al Viro 5cae841b13 [PATCH] ISA DMA Kconfig fixes - part 1
A bunch of drivers use ISA DMA helpers or their equivalents for
platforms that have ISA with different DMA controller (a lot of ARM
boxen).  Currently there is no way to put such dependency in Kconfig -
CONFIG_ISA is not it (e.g.  it is not set on platforms that have no ISA
slots, but have on-board devices that pretend to be ISA ones).

New symbol added - ISA_DMA_API.  Set when we have functional
enable_dma()/set_dma_mode()/etc.  set of helpers.  Next patches in the
series will add missing dependencies for drivers that need them.

I'm very carefully staying the hell out of the recurring flamefest on
what exactly CONFIG_ISA would mean in ideal world - added symbol has a
well-defined meaning and for now I really want to treat it as completely
independent from the mess around CONFIG_ISA.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-04 07:33:13 -07:00
Jesper Juhl 7ed20e1ad5 [PATCH] convert that currently tests _NSIG directly to use valid_signal()
Convert most of the current code that uses _NSIG directly to instead use
valid_signal().  This avoids gcc -W warnings and off-by-one errors.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:14 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00