Commit Graph

6275 Commits

Author SHA1 Message Date
David Sterba cc2b702c52 btrfs: use correct types for page indices in btrfs_page_exists_in_range
Variables start_idx and end_idx are supposed to hold a page index
derived from the file offsets. The int type is not the right one though,
offsets larger than 1 << 44 will get silently trimmed off the high bits.
(1 << 44 is 16TiB)

What can go wrong, if start is below the boundary and end gets trimmed:
- if there's a page after start, we'll find it (radix_tree_gang_lookup_slot)
- the final check "if (page->index <= end_idx)" will unexpectedly fail

The function will return false, ie. "there's no page in the range",
although there is at least one.

btrfs_page_exists_in_range is used to prevent races in:

* in hole punching, where we make sure there are not pages in the
  truncated range, otherwise we'll wait for them to finish and redo
  truncation, but we're going to replace the pages with holes anyway so
  the only problem is the intermediate state

* lock_extent_direct: we want to make sure there are no pages before we
  lock and start DIO, to prevent stale data reads

For practical occurence of the bug, there are several constaints.  The
file must be quite large, the affected range must cross the 16TiB
boundary and the internal state of the file pages and pending operations
must match.  Also, we must not have started any ordered data in the
range, otherwise we don't even reach the buggy function check.

DIO locking tries hard in several places to avoid deadlocks with
buffered IO and avoids waiting for ranges. The worst consequence seems
to be stale data read.

CC: Liu Bo <bo.li.liu@oracle.com>
CC: stable@vger.kernel.org	# 3.16+
Fixes: fc4adbff82 ("btrfs: Drop EXTENT_UPTODATE check in hole punching and direct locking")
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-06-01 16:56:17 +02:00
Colin Ian King bff5baf8aa btrfs: fix incorrect error return ret being passed to mapping_set_error
The setting of return code ret should be based on the error code
passed into function end_extent_writepage and not on ret. Thanks
to Liu Bo for spotting this mistake in the original fix I submitted.

Detected by CoverityScan, CID#1414312 ("Logically dead code")

Fixes: 5dca6eea91 ("Btrfs: mark mapping with error flag to report errors to userspace")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-05-16 15:42:10 +02:00
Jan Kara 8d91012528 btrfs: Make flush bios explicitely sync
Commit b685d3d65a "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions.  generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions

Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.

CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Fixes: b685d3d65a
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-05-16 15:42:01 +02:00
Qu Wenruo 4751832da9 btrfs: fiemap: Cache and merge fiemap extent before submit it to user
[BUG]
Cycle mount btrfs can cause fiemap to return different result.
Like:
 # mount /dev/vdb5 /mnt/btrfs
 # dd if=/dev/zero bs=16K count=4 oflag=dsync of=/mnt/btrfs/file
 # xfs_io -c "fiemap -v" /mnt/btrfs/file
 /mnt/test/file:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..127]:        25088..25215       128   0x1
 # umount /mnt/btrfs
 # mount /dev/vdb5 /mnt/btrfs
 # xfs_io -c "fiemap -v" /mnt/btrfs/file
 /mnt/test/file:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..31]:         25088..25119        32   0x0
   1: [32..63]:        25120..25151        32   0x0
   2: [64..95]:        25152..25183        32   0x0
   3: [96..127]:       25184..25215        32   0x1
But after above fiemap, we get correct merged result if we call fiemap
again.
 # xfs_io -c "fiemap -v" /mnt/btrfs/file
 /mnt/test/file:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..127]:        25088..25215       128   0x1

[REASON]
Btrfs will try to merge extent map when inserting new extent map.

btrfs_fiemap(start=0 len=(u64)-1)
|- extent_fiemap(start=0 len=(u64)-1)
   |- get_extent_skip_holes(start=0 len=64k)
   |  |- btrfs_get_extent_fiemap(start=0 len=64k)
   |     |- btrfs_get_extent(start=0 len=64k)
   |        |  Found on-disk (ino, EXTENT_DATA, 0)
   |        |- add_extent_mapping()
   |        |- Return (em->start=0, len=16k)
   |
   |- fiemap_fill_next_extent(logic=0 phys=X len=16k)
   |
   |- get_extent_skip_holes(start=0 len=64k)
   |  |- btrfs_get_extent_fiemap(start=0 len=64k)
   |     |- btrfs_get_extent(start=16k len=48k)
   |        |  Found on-disk (ino, EXTENT_DATA, 16k)
   |        |- add_extent_mapping()
   |        |  |- try_merge_map()
   |        |     Merge with previous em start=0 len=16k
   |        |     resulting em start=0 len=32k
   |        |- Return (em->start=0, len=32K)    << Merged result
   |- Stripe off the unrelated range (0~16K) of return em
   |- fiemap_fill_next_extent(logic=16K phys=X+16K len=16K)
      ^^^ Causing split fiemap extent.

And since in add_extent_mapping(), em is already merged, in next
fiemap() call, we will get merged result.

[FIX]
Here we introduce a new structure, fiemap_cache, which records previous
fiemap extent.

And will always try to merge current fiemap_cache result before calling
fiemap_fill_next_extent().
Only when we failed to merge current fiemap extent with cached one, we
will call fiemap_fill_next_extent() to submit cached one.

So by this method, we can merge all fiemap extents.

It can also be done in fs/ioctl.c, however the problem is if
fieinfo->fi_extents_max == 0, we have no space to cache previous fiemap
extent.
So I choose to merge it in btrfs.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-05-16 15:41:53 +02:00
Linus Torvalds 1176032cb1 Merge branch 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "This has fixes and cleanups Dave Sterba collected for the merge
  window.

  The biggest functional fixes are between btrfs raid5/6 and scrub, and
  raid5/6 and device replacement. Some of our pending qgroup fixes are
  included as well while I bash on the rest in testing.

  We also have the usual set of cleanups, including one that makes
  __btrfs_map_block() much more maintainable, and conversions from
  atomic_t to refcount_t"

* 'for-linus-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (71 commits)
  btrfs: fix the gfp_mask for the reada_zones radix tree
  Btrfs: fix reported number of inode blocks
  Btrfs: send, fix file hole not being preserved due to inline extent
  Btrfs: fix extent map leak during fallocate error path
  Btrfs: fix incorrect space accounting after failure to insert inline extent
  Btrfs: fix invalid attempt to free reserved space on failure to cow range
  btrfs: Handle delalloc error correctly to avoid ordered extent hang
  btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
  btrfs: check if the device is flush capable
  btrfs: delete unused member nobarriers
  btrfs: scrub: Fix RAID56 recovery race condition
  btrfs: scrub: Introduce full stripe lock for RAID56
  btrfs: Use ktime_get_real_ts for root ctime
  Btrfs: handle only applicable errors returned by btrfs_get_extent
  btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
  btrfs: use q which is already obtained from bdev_get_queue
  Btrfs: switch to div64_u64 if with a u64 divisor
  Btrfs: update scrub_parity to use u64 stripe_len
  Btrfs: enable repair during read for raid56 profile
  btrfs: use clear_page where appropriate
  ...
2017-05-10 08:33:17 -07:00
Michal Hocko 19809c2da2 mm, vmalloc: use __GFP_HIGHMEM implicitly
__vmalloc* allows users to provide gfp flags for the underlying
allocation.  This API is quite popular

  $ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l
  77

The only problem is that many people are not aware that they really want
to give __GFP_HIGHMEM along with other flags because there is really no
reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages
which are mapped to the kernel vmalloc space.  About half of users don't
use this flag, though.  This signals that we make the API unnecessarily
too complex.

This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to
be mapped to the vmalloc space.  Current users which add __GFP_HIGHMEM
are simplified and drop the flag.

Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Cristopher Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Michal Hocko 752ade68cb treewide: use kv[mz]alloc* rather than opencoded variants
There are many code paths opencoding kvmalloc.  Let's use the helper
instead.  The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator.  E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation.  This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously.  There is no guarantee something like that happens
though.

This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.

Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Chris Mason 9bcaaea741 btrfs: fix the gfp_mask for the reada_zones radix tree
Commits cc8385b59e and 7ef70b4d99 added preallocation for the
reada radix trees and also switched them over to GFP_KERNEL for the
default gfp mask.

Since we're doing radix tree insertions under spinlocks, we need
to make sure the mask doesn't allow sleeping.  This fix keeps
the radix preallocation but switches back to the original gfp_mask.

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2017-05-04 16:56:11 -07:00
Linus Torvalds 694752922b Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:

 - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
   was initially a fork of CFQ, but subsequently changed to implement
   fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
   to be used on desktop type single drives, providing good fairness.
   From Paolo.

 - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
   using a scalable token based algorithm that throttles IO based on
   live completion IO stats, similary to blk-wbt. From Omar.

 - A series from Jan, moving users to separately allocated backing
   devices. This continues the work of separating backing device life
   times, solving various problems with hot removal.

 - A series of updates for lightnvm, mostly from Javier. Includes a
   'pblk' target that exposes an open channel SSD as a physical block
   device.

 - A series of fixes and improvements for nbd from Josef.

 - A series from Omar, removing queue sharing between devices on mostly
   legacy drivers. This helps us clean up other bits, if we know that a
   queue only has a single device backing. This has been overdue for
   more than a decade.

 - Fixes for the blk-stats, and improvements to unify the stats and user
   windows. This both improves blk-wbt, and enables other users to
   register a need to receive IO stats for a device. From Omar.

 - blk-throttle improvements from Shaohua. This provides a scalable
   framework for implementing scalable priotization - particularly for
   blk-mq, but applicable to any type of block device. The interface is
   marked experimental for now.

 - Bucketized IO stats for IO polling from Stephen Bates. This improves
   efficiency of polled workloads in the presence of mixed block size
   IO.

 - A few fixes for opal, from Scott.

 - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
   From a variety of folks, mostly Sagi and James Smart.

 - A series from Bart, improving our exposed info and capabilities from
   the blk-mq debugfs support.

 - A series from Christoph, cleaning up how handle WRITE_ZEROES.

 - A series from Christoph, cleaning up the block layer handling of how
   we track errors in a request. On top of being a nice cleanup, it also
   shrinks the size of struct request a bit.

 - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
   never used by platforms, and the latter has outlived it's usefulness.

 - Various little bug fixes and cleanups from a wide variety of folks.

* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
  block: hide badblocks attribute by default
  blk-mq: unify hctx delay_work and run_work
  block: add kblock_mod_delayed_work_on()
  blk-mq: unify hctx delayed_run_work and run_work
  nbd: fix use after free on module unload
  MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
  blk-mq-sched: alloate reserved tags out of normal pool
  mtip32xx: use runtime tag to initialize command header
  scsi: Implement blk_mq_ops.show_rq()
  blk-mq: Add blk_mq_ops.show_rq()
  blk-mq: Show operation, cmd_flags and rq_flags names
  blk-mq: Make blk_flags_show() callers append a newline character
  blk-mq: Move the "state" debugfs attribute one level down
  blk-mq: Unregister debugfs attributes earlier
  blk-mq: Only unregister hctxs for which registration succeeded
  blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
  blk-mq: Let blk_mq_debugfs_register() look up the queue name
  blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
  ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
  ide-pm: always pass 0 error to __blk_end_request_all
  ..
2017-05-01 10:39:57 -07:00
Linus Torvalds 28b2013587 Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
 "We have one more fix for btrfs.

  This gets rid of a new WARN_ON from rc1 that ended up making more
  noise than we really want. The larger fix for the underflow got
  delayed a bit and it's better for now to put it under
  CONFIG_BTRFS_DEBUG"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: qgroup: move noisy underflow warning to debugging build
2017-04-28 10:13:17 -07:00
Chris Mason bce19f9d23 Merge branch 'for-chris-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.12 2017-04-27 14:13:09 -07:00
Filipe Manana a7e3b975a0 Btrfs: fix reported number of inode blocks
Currently when there are buffered writes that were not yet flushed and
they fall within allocated ranges of the file (that is, not in holes or
beyond eof assuming there are no prealloc extents beyond eof), btrfs
simply reports an incorrect number of used blocks through the stat(2)
system call (or any of its variants), regardless of mount options or
inode flags (compress, compress-force, nodatacow). This is because the
number of blocks used that is reported is based on the current number
of bytes in the vfs inode plus the number of dealloc bytes in the btrfs
inode. The later covers bytes that both fall within allocated regions
of the file and holes.

Example scenarios where the number of reported blocks is wrong while the
buffered writes are not flushed:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt/sdc

  $ xfs_io -f -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo1
  wrote 65536/65536 bytes at offset 0
  64 KiB, 16 ops; 0.0000 sec (259.336 MiB/sec and 66390.0415 ops/sec)

  $ sync

  $ xfs_io -c "pwrite -S 0xbb 0 64K" /mnt/sdc/foo1
  wrote 65536/65536 bytes at offset 0
  64 KiB, 16 ops; 0.0000 sec (192.308 MiB/sec and 49230.7692 ops/sec)

  # The following should have reported 64K...
  $ du -h /mnt/sdc/foo1
  128K	/mnt/sdc/foo1

  $ sync

  # After flushing the buffered write, it now reports the correct value.
  $ du -h /mnt/sdc/foo1
  64K	/mnt/sdc/foo1

  $ xfs_io -f -c "falloc -k 0 128K" -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo2
  wrote 65536/65536 bytes at offset 0
  64 KiB, 16 ops; 0.0000 sec (520.833 MiB/sec and 133333.3333 ops/sec)

  $ sync

  $ xfs_io -c "pwrite -S 0xbb 64K 64K" /mnt/sdc/foo2
  wrote 65536/65536 bytes at offset 65536
  64 KiB, 16 ops; 0.0000 sec (260.417 MiB/sec and 66666.6667 ops/sec)

  # The following should have reported 128K...
  $ du -h /mnt/sdc/foo2
  192K	/mnt/sdc/foo2

  $ sync

  # After flushing the buffered write, it now reports the correct value.
  $ du -h /mnt/sdc/foo2
  128K	/mnt/sdc/foo2

So the number of used file blocks is simply incorrect, unlike in other
filesystems such as ext4 and xfs for example, but only while the buffered
writes are not flushed.

Fix this by tracking the number of delalloc bytes that fall within holes
and beyond eof of a file, and use instead this new counter when reporting
the number of used blocks for an inode.

Another different problem that exists is that the delalloc bytes counter
is reset when writeback starts (by clearing the EXTENT_DEALLOC flag from
the respective range in the inode's iotree) and the vfs inode's bytes
counter is only incremented when writeback finishes (through
insert_reserved_file_extent()). Therefore while writeback is ongoing we
simply report a wrong number of blocks used by an inode if the write
operation covers a range previously unallocated. While this change does
not fix this problem, it does minimizes it a lot by shortening that time
window, as the new dealloc bytes counter (new_delalloc_bytes) is only
decremented when writeback finishes right before updating the vfs inode's
bytes counter. Fully fixing this second problem is not trivial and will
be addressed later by a different patch.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-04-26 16:27:26 +01:00
Filipe Manana e1cbfd7bf6 Btrfs: send, fix file hole not being preserved due to inline extent
Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:

  $ mkfs.btrfs -f /dev/sdb
  $ mount -o compress /dev/sdb /mnt
  $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
  $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar

In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7b
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.

So teach the incremental send code to deal with this particular case.

The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-04-26 16:27:25 +01:00
Filipe Manana be2d253cc9 Btrfs: fix extent map leak during fallocate error path
If the call to btrfs_qgroup_reserve_data() failed, we were leaking an
extent map structure. The failure can happen either due to an -ENOMEM
condition or, when quotas are enabled, due to -EDQUOT for example.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
2017-04-26 16:27:24 +01:00
Filipe Manana 1c81ba237b Btrfs: fix incorrect space accounting after failure to insert inline extent
When using compression, if we fail to insert an inline extent we
incorrectly end up attempting to free the reserved data space twice,
once through extent_clear_unlock_delalloc(), because we pass it the
flag EXTENT_DO_ACCOUNTING, and once through a direct call to
btrfs_free_reserved_data_space_noquota(). This results in a trace
like the following:

[  834.576240] ------------[ cut here ]------------
[  834.576825] WARNING: CPU: 2 PID: 486 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.579501] Modules linked in: btrfs crc32c_generic xor raid6_pq ppdev i2c_piix4 acpi_cpufreq psmouse tpm_tis parport_pc pcspkr serio_raw tpm_tis_core sg parport evdev i2c_core tpm button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[  834.592116] CPU: 2 PID: 486 Comm: kworker/u32:4 Not tainted 4.10.0-rc8-btrfs-next-37+ #2
[  834.593316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[  834.595273] Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
[  834.596103] Call Trace:
[  834.596103]  dump_stack+0x67/0x90
[  834.596103]  __warn+0xc2/0xdd
[  834.596103]  warn_slowpath_null+0x1d/0x1f
[  834.596103]  btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.596103]  compress_file_range.constprop.42+0x2fa/0x3fc [btrfs]
[  834.596103]  ? submit_compressed_extents+0x3a7/0x3a7 [btrfs]
[  834.596103]  async_cow_start+0x32/0x4d [btrfs]
[  834.596103]  btrfs_scrubparity_helper+0x187/0x3e7 [btrfs]
[  834.596103]  btrfs_delalloc_helper+0xe/0x10 [btrfs]
[  834.596103]  process_one_work+0x273/0x4e4
[  834.596103]  worker_thread+0x1eb/0x2ca
[  834.596103]  ? rescuer_thread+0x2b6/0x2b6
[  834.596103]  kthread+0x100/0x108
[  834.596103]  ? __list_del_entry+0x22/0x22
[  834.596103]  ret_from_fork+0x2e/0x40
[  834.611656] ---[ end trace 719902fe6bdef08f ]---

So fix this by not calling directly btrfs_free_reserved_data_space_noquota()
if an error happened.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-04-26 16:27:23 +01:00
Filipe Manana a315e68f6e Btrfs: fix invalid attempt to free reserved space on failure to cow range
When attempting to COW a file range (we are starting writeback and doing
COW), if we manage to reserve an extent for the range we will write into
but fail after reserving it and before creating the respective ordered
extent, we end up in an error path where we attempt to decrement the
data space's bytes_may_use counter after we already did it while
reserving the extent, leading to a warning/trace like the following:

[  847.621524] ------------[ cut here ]------------
[  847.625441] WARNING: CPU: 5 PID: 4905 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  847.633704] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq i2c_piix4 ppdev psmouse tpm_tis serio_raw pcspkr parport_pc tpm_tis_core i2c_core sg
[  847.644616] CPU: 5 PID: 4905 Comm: xfs_io Not tainted 4.10.0-rc8-btrfs-next-37+ #2
[  847.648601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[  847.648601] Call Trace:
[  847.648601]  dump_stack+0x67/0x90
[  847.648601]  __warn+0xc2/0xdd
[  847.648601]  warn_slowpath_null+0x1d/0x1f
[  847.648601]  btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  847.648601]  btrfs_clear_bit_hook+0x140/0x258 [btrfs]
[  847.648601]  clear_state_bit+0x87/0x128 [btrfs]
[  847.648601]  __clear_extent_bit+0x222/0x2b7 [btrfs]
[  847.648601]  clear_extent_bit+0x17/0x19 [btrfs]
[  847.648601]  extent_clear_unlock_delalloc+0x3b/0x6b [btrfs]
[  847.648601]  cow_file_range.isra.39+0x387/0x39a [btrfs]
[  847.648601]  run_delalloc_nocow+0x4d7/0x70e [btrfs]
[  847.648601]  ? arch_local_irq_save+0x9/0xc
[  847.648601]  run_delalloc_range+0xa7/0x2b5 [btrfs]
[  847.648601]  writepage_delalloc.isra.31+0xb9/0x15c [btrfs]
[  847.648601]  __extent_writepage+0x249/0x2e8 [btrfs]
[  847.648601]  extent_write_cache_pages.constprop.33+0x28b/0x36c [btrfs]
[  847.648601]  ? arch_local_irq_save+0x9/0xc
[  847.648601]  ? mark_lock+0x24/0x201
[  847.648601]  extent_writepages+0x4b/0x5c [btrfs]
[  847.648601]  ? btrfs_writepage_start_hook+0xed/0xed [btrfs]
[  847.648601]  btrfs_writepages+0x28/0x2a [btrfs]
[  847.648601]  do_writepages+0x23/0x2c
[  847.648601]  __filemap_fdatawrite_range+0x5a/0x61
[  847.648601]  filemap_fdatawrite_range+0x13/0x15
[  847.648601]  btrfs_fdatawrite_range+0x20/0x46 [btrfs]
[  847.648601]  start_ordered_ops+0x19/0x23 [btrfs]
[  847.648601]  btrfs_sync_file+0x136/0x42c [btrfs]
[  847.648601]  vfs_fsync_range+0x8c/0x9e
[  847.648601]  vfs_fsync+0x1c/0x1e
[  847.648601]  do_fsync+0x31/0x4a
[  847.648601]  SyS_fsync+0x10/0x14
[  847.648601]  entry_SYSCALL_64_fastpath+0x18/0xad
[  847.648601] RIP: 0033:0x7f5b05200800
[  847.648601] RSP: 002b:00007ffe204f71c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
[  847.648601] RAX: ffffffffffffffda RBX: ffffffff8109637b RCX: 00007f5b05200800
[  847.648601] RDX: 00000000008bd0a0 RSI: 00000000008bd2e0 RDI: 0000000000000003
[  847.648601] RBP: ffffc90001d67f98 R08: 000000000000ffff R09: 000000000000001f
[  847.648601] R10: 00000000000001f6 R11: 0000000000000246 R12: 0000000000000046
[  847.648601] R13: ffffc90001d67f78 R14: 00007f5b054be740 R15: 00007f5b054be740
[  847.648601]  ? trace_hardirqs_off_caller+0x3f/0xaa
[  847.685787] ---[ end trace 2a4a3e15382508e8 ]---

So fix this by not attempting to decrement the data space info's
bytes_may_use counter if we already reserved the extent and an error
happened before creating the ordered extent. We are already correctly
freeing the reserved extent if an error happens, so there's no additional
measure needed.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-04-26 16:27:22 +01:00
Qu Wenruo 524272607e btrfs: Handle delalloc error correctly to avoid ordered extent hang
[BUG]
If run_delalloc_range() returns error and there is already some ordered
extents created, btrfs will be hanged with the following backtrace:

Call Trace:
 __schedule+0x2d4/0xae0
 schedule+0x3d/0x90
 btrfs_start_ordered_extent+0x160/0x200 [btrfs]
 ? wake_atomic_t_function+0x60/0x60
 btrfs_run_ordered_extent_work+0x25/0x40 [btrfs]
 btrfs_scrubparity_helper+0x1c1/0x620 [btrfs]
 btrfs_flush_delalloc_helper+0xe/0x10 [btrfs]
 process_one_work+0x2af/0x720
 ? process_one_work+0x22b/0x720
 worker_thread+0x4b/0x4f0
 kthread+0x10f/0x150
 ? process_one_work+0x720/0x720
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x2e/0x40

[CAUSE]

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>|                       |<---------- cleanup range --------->|
 ||
 \_=> First page handled by end_extent_writepage() in __extent_writepage()

The problem is caused by error handler of run_delalloc_range(), which
doesn't handle any created ordered extents, leaving them waiting on
btrfs_finish_ordered_io() to finish.

However after run_delalloc_range() returns error, __extent_writepage()
won't submit bio, so btrfs_writepage_end_io_hook() won't be triggered
except the first page, and btrfs_finish_ordered_io() won't be triggered
for created ordered extents either.

So OE 2~n will hang forever, and if OE 1 is larger than one page, it
will also hang.

[FIX]
Introduce btrfs_cleanup_ordered_extents() function to cleanup created
ordered extents and finish them manually.

The function is based on existing
btrfs_endio_direct_write_update_ordered() function, and modify it to
act just like btrfs_writepage_endio_hook() but handles specified range
other than one page.

After fix, delalloc error will be handled like:

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>|<--------  ----------->|<------ old error handler --------->|
 ||          ||
 ||          \_=> Cleaned up by cleanup_ordered_extents()
 \_=> First page handled by end_extent_writepage() in __extent_writepage()

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-04-26 16:27:21 +01:00
Qu Wenruo 4dbd80fb91 btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
[BUG]
When btrfs_reloc_clone_csum() reports error, it can underflow metadata
and leads to kernel assertion on outstanding extents in
run_delalloc_nocow() and cow_file_range().

 BTRFS info (device vdb5): relocating block group 12582912 flags data
 BTRFS info (device vdb5): found 1 extents
 assertion failed: inode->outstanding_extents >= num_extents, file: fs/btrfs//extent-tree.c, line: 5858

Currently, due to another bug blocking ordered extents, the bug is only
reproducible under certain block group layout and using error injection.

a) Create one data block group with one 4K extent in it.
   To avoid the bug that hangs btrfs due to ordered extent which never
   finishes
b) Make btrfs_reloc_clone_csum() always fail
c) Relocate that block group

[CAUSE]
run_delalloc_nocow() and cow_file_range() handles error from
btrfs_reloc_clone_csum() wrongly:

(The ascii chart shows a more generic case of this bug other than the
bug mentioned above)

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
                    |<----------- cleanup range --------------->|
|<-----------  ----------->|
             \/
 btrfs_finish_ordered_io() range

So error handler, which calls extent_clear_unlock_delalloc() with
EXTENT_DELALLOC and EXTENT_DO_ACCOUNT bits, and btrfs_finish_ordered_io()
will both cover OE n, and free its metadata, causing metadata under flow.

[Fix]
The fix is to ensure after calling btrfs_add_ordered_extent(), we only
call error handler after increasing the iteration offset, so that
cleanup range won't cover any created ordered extent.

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<-----------  ----------->|<---------- cleanup range --------->|
             \/
 btrfs_finish_ordered_io() range

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-04-26 16:27:21 +01:00
Jan Kara 9e11ceee23 btrfs: Convert to separately allocated bdi
Allocate struct backing_dev_info separately instead of embedding it
inside superblock. This unifies handling of bdi among users.

CC: Chris Mason <clm@fb.com>
CC: Josef Bacik <jbacik@fb.com>
CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20 12:09:55 -06:00
David Sterba 338bd52f3c btrfs: qgroup: move noisy underflow warning to debugging build
The WARN_ON and warning from report_reserved_underflow can become very
noisy and is visible unconditionally although this is namely for
debugging. The patch "btrfs: Add WARN_ON for qgroup reserved underflow"
(18dc22c19b) went to 4.11-rc1 and the plan
was to get the fix as well, but this hasn't happened.

CC: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-19 12:40:49 +02:00
Anand Jain c2a9c7ab47 btrfs: check if the device is flush capable
The block layer call chain from submit_bio will check if the write cache
is enabled for the given queue before submitting the flush. This will
add a code to fail fast if its not.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated changelog to reflect current code stat, blkdev_issue_flush is
  not used yet ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 16:13:27 +02:00
Anand Jain 13e88e1560 btrfs: delete unused member nobarriers
The last consumer of nobarriers is removed by the commit [1] and sync
won't fail with EOPNOTSUPP anymore. Thus, now when write cache is write
through it just return success without actually transpiring such a
request to the block device/lun.

[1]
commit b25de9d6da
block: remove BIO_EOPNOTSUPP

And, as the device/lun write cache state may change dynamically saving
such as state won't help either. So deleting the member nobarriers.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 16:12:07 +02:00
Qu Wenruo 28d70e237d btrfs: scrub: Fix RAID56 recovery race condition
When scrubbing a RAID5 which has recoverable data corruption (only one
data stripe is corrupted), sometimes scrub will report more csum errors
than expected. Sometimes even unrecoverable error will be reported.

The problem can be easily reproduced by the following steps:
1) Create a btrfs with RAID5 data profile with 3 devs
2) Mount it with nospace_cache or space_cache=v2
   To avoid extra data space usage.
3) Create a 128K file and sync the fs, unmount it
   Now the 128K file lies at the beginning of the data chunk
4) Locate the physical bytenr of data chunk on dev3
   Dev3 is the 1st data stripe.
5) Corrupt the first 64K of the data chunk stripe on dev3
6) Mount the fs and scrub it

The correct csum error number should be 16 (assuming using x86_64).
Larger csum error number can be reported in a 1/3 chance.
And unrecoverable error can also be reported in a 1/10 chance.

The root cause of the problem is RAID5/6 recover code has race
condition, due to the fact that full scrub is initiated per device.

While for other mirror based profiles, each mirror is independent with
each other, so race won't cause any big problem.

For example:
        Corrupted       |       Correct          |      Correct        |
|   Scrub dev3 (D1)     |    Scrub dev2 (D2)     |    Scrub dev1(P)    |
------------------------------------------------------------------------
Read out D1             |Read out D2             |Read full stripe     |
Check csum              |Check csum              |Check parity         |
Csum mismatch           |Csum match, continue    |Parity mismatch      |
handle_errored_block    |                        |handle_errored_block |
 Read out full stripe   |                        | Read out full stripe|
 D1 csum error(err++)   |                        | D1 csum error(err++)|
 Recover D1             |                        | Recover D1          |

So D1's csum error is accounted twice, just because
handle_errored_block() doesn't have enough protection, and race can happen.

On even worse case, for example D1's recovery code is re-writing
D1/D2/P, and P's recovery code is just reading out full stripe, then we
can cause unrecoverable error.

This patch will use previously introduced lock_full_stripe() and
unlock_full_stripe() to protect the whole scrub_handle_errored_block()
function for RAID56 recovery.
So no extra csum error nor unrecoverable error.

Reported-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:27 +02:00
Qu Wenruo 0966a7b130 btrfs: scrub: Introduce full stripe lock for RAID56
Unlike mirror based profiles, RAID5/6 recovery needs to read out the
whole full stripe.

And if we don't do proper protection, it can easily cause race condition.

Introduce 2 new functions: lock_full_stripe() and unlock_full_stripe()
for RAID5/6.
Which store a rb_tree of mutexes for full stripes, so scrub callers can
use them to lock a full stripe to avoid race.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:27 +02:00
Deepa Dinamani fa7aede2ab btrfs: Use ktime_get_real_ts for root ctime
btrfs_root_item maintains the ctime for root updates.  This is not part
of vfs_inode.

Since current_time() uses struct inode* as an argument as Linus
suggested, this cannot be used to update root times unless, we modify
the signature to use inode.

Since btrfs uses nanosecond time granularity, it can also use
ktime_get_real_ts directly to obtain timestamp for the root. It is
necessary to use the timespec time api here because the same
btrfs_set_stack_timespec_*() apis are used for vfs inode times as well.
These can be transitioned to using timespec64 when btrfs internally
changes to use timespec64 as well.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:27 +02:00
Dan Carpenter 9986277e0e Btrfs: handle only applicable errors returned by btrfs_get_extent
btrfs_get_extent() never returns NULL pointers, so this code introduces
a static checker warning.

The btrfs_get_extent() is a bit complex, but trust me that it doesn't
return NULLs and also if it did we would trigger the BUG_ON(!em) before
the last return statement.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[ updated subject ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:27 +02:00
Qu Wenruo 82bafb38c2 btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
[BUG]
The easist way to reproduce the bug is:
------
 # mkfs.btrfs -f $dev -n 16K
 # mount $dev $mnt -o inode_cache
 # btrfs quota enable $mnt
 # btrfs quota rescan -w $mnt
 # btrfs qgroup show $mnt
qgroupid         rfer         excl
--------         ----         ----
0/5          32.00KiB     32.00KiB
             ^^ Twice the correct value
------

And fstests/btrfs qgroup test group can easily detect them with
inode_cache mount option.
Although some of them are false alerts since old test cases are using
fixed golden output.
While new test cases will use "btrfs check" to detect qgroup mismatch.

[CAUSE]
Inode_cache mount option will make commit_fs_roots() to call
btrfs_save_ino_cache() to update fs/subvol trees, and generate new
delayed refs.

However we call btrfs_qgroup_prepare_account_extents() too early, before
commit_fs_roots().
This makes the "old_roots" for newly generated extents are always NULL.
For freeing extent case, this makes both new_roots and old_roots to be
empty, while correct old_roots should not be empty.
This causing qgroup numbers not decreased correctly.

[FIX]
Modify the timing of calling btrfs_qgroup_prepare_account_extents() to
just before btrfs_qgroup_account_extents(), and add needed delayed_refs
handler.
So qgroup can handle inode_map mount options correctly.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Anand Jain e884f4f06e btrfs: use q which is already obtained from bdev_get_queue
We have already assigned q from bdev_get_queue() so use it.
And rearrange the code for better view.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Liu Bo 42c61ab676 Btrfs: switch to div64_u64 if with a u64 divisor
This is fixing code pieces where we use div_u64 when passing a u64 divisor.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Liu Bo 972d721939 Btrfs: update scrub_parity to use u64 stripe_len
Commit 3d8da67817 ("Btrfs: fix divide error upon chunk's stripe_len")
changed stripe_len in struct map_lookup to u64, but didn't update
stripe_len in struct scrub_parity.

This updates the type and switches to div64_u64_rem to match u64 divisor.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Liu Bo c725328c55 Btrfs: enable repair during read for raid56 profile
Now that scrub can fix data errors with the help of parity for raid56
profile, repair during read is able to as well.

Although the mirror num in raid56 scenario has different meanings, i.e.
0 or 1: read data directly
> 1:    do recover with parity,
it could be fit into how we repair bad block during read.

The trick is to use BTRFS_MAP_READ instead of BTRFS_MAP_WRITE to get the
device and position on it.

Cc: David Sterba <dsterba@suse.cz>
Tested-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
David Sterba 619a974292 btrfs: use clear_page where appropriate
There's a helper to clear whole page, with a arch-specific optimized
code. The replaced cases do not seem to be in performace critical code,
but we still might get some percent gain.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Qu Wenruo e501bfe323 btrfs: Prevent scrub recheck from racing with dev replace
scrub_setup_recheck_block() calls btrfs_map_sblock() and then accesses
bbio without protection of bio_counter.

This can lead to use-after-free if racing with dev replace cancel.

Fix it by increasing bio_counter before calling btrfs_map_sblock() and
decreasing the bio_counter when corresponding recover is finished.

Cc: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Qu Wenruo ae6529c35b btrfs: Wait for in-flight bios before freeing target device for raid56
When raid56 dev-replace is cancelled by running scrub, we will free
target device without waiting for in-flight bios, causing the following
NULL pointer deference or general protection failure.

 BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0
 IP: generic_make_request_checks+0x4d/0x610
 CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G  O    4.11.0-rc2 #72
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
 Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs]
 task: ffff88002875b4c0 task.stack: ffffc90001334000
 RIP: 0010:generic_make_request_checks+0x4d/0x610
 Call Trace:
  ? generic_make_request+0xc7/0x360
  generic_make_request+0x24/0x360
  ? generic_make_request+0xc7/0x360
  submit_bio+0x64/0x120
  ? page_in_rbio+0x4d/0x80 [btrfs]
  ? rbio_orig_end_io+0x80/0x80 [btrfs]
  finish_rmw+0x3f4/0x540 [btrfs]
  validate_rbio_for_rmw+0x36/0x40 [btrfs]
  raid_rmw_end_io+0x7a/0x90 [btrfs]
  bio_endio+0x56/0x60
  end_workqueue_fn+0x3c/0x40 [btrfs]
  btrfs_scrubparity_helper+0xef/0x620 [btrfs]
  btrfs_endio_raid56_helper+0xe/0x10 [btrfs]
  process_one_work+0x2af/0x720
  ? process_one_work+0x22b/0x720
  worker_thread+0x4b/0x4f0
  kthread+0x10f/0x150
  ? process_one_work+0x720/0x720
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x2e/0x40
 RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8

In btrfs_dev_replace_finishing(), we will call
btrfs_rm_dev_replace_blocked() to wait bios before destroying the target
device when scrub is finished normally.

However when dev-replace is aborted, either due to error or cancelled by
scrub, we didn't wait for bios, this can lead to use-after-free if there
are bios holding the target device.

Furthermore, for raid56 scrub, at least 2 places are calling
btrfs_map_sblock() without protection of bio_counter, leading to the
problem.

This patch fixes the problem:
1) Wait for bio_counter before freeing target device when canceling
   replace
2) When calling btrfs_map_sblock() for raid56, use bio_counter to
   protect the call.

Cc: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Qu Wenruo 9a33944bdf btrfs: scrub: Don't append on-disk pages for raid56 scrub
In the following situation, scrub will calculate wrong parity to
overwrite the correct one:

RAID5 full stripe:

Before
|     Dev 1      |     Dev  2     |     Dev 3     |
| Data stripe 1  | Data stripe 2  | Parity Stripe |
--------------------------------------------------- 0
| 0x0000 (Bad)   |     0xcdcd     |     0x0000    |
--------------------------------------------------- 4K
|     0xcdcd     |     0xcdcd     |     0x0000    |
...
|     0xcdcd     |     0xcdcd     |     0x0000    |
--------------------------------------------------- 64K

After scrubbing dev3 only:

|     Dev 1      |     Dev  2     |     Dev 3     |
| Data stripe 1  | Data stripe 2  | Parity Stripe |
--------------------------------------------------- 0
| 0xcdcd (Good)  |     0xcdcd     | 0xcdcd (Bad)  |
--------------------------------------------------- 4K
|     0xcdcd     |     0xcdcd     |     0x0000    |
...
|     0xcdcd     |     0xcdcd     |     0x0000    |
--------------------------------------------------- 64K

The reason is that after raid56 read rebuild rbio->stripe_pages are all
correctly recovered (0xcd for data stripes).

However when we check and repair parity in
scrub_parity_check_and_repair(), we will append pages in sparity->spages
list to rbio->bio_pages[], which contains old on-disk data.

And when we submit parity data to disk, we calculate parity using
rbio->bio_pages[] first, if rbio->bio_pages[] not found, then fallback
to rbio->stripe_pages[].

The patch fix it by not appending pages from sparity->spages.
So finish_parity_scrub() will use rbio->stripe_pages[] which is correct.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Qu Wenruo d51ea5dd22 btrfs: qgroup: Re-arrange tracepoint timing to co-operate with reserved space tracepoint
Newly introduced qgroup reserved space trace points are normally nested
into several common qgroup operations.

While some other trace points are not well placed to co-operate with
them, causing confusing output.

This patch re-arrange trace_btrfs_qgroup_release_data() and
trace_btrfs_qgroup_free_delayed_ref() trace points so they are triggered
before reserved space ones.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Qu Wenruo 3159fe7bae btrfs: qgroup: Add trace point for qgroup reserved space
Introduce the following trace points:
qgroup_update_reserve
qgroup_meta_reserve

These trace points are handy to trace qgroup reserve space related
problems.

Also export btrfs_qgroup structure, as now we directly pass btrfs_qgroup
structure to trace points, so that structure needs to be exported.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
David Sterba 825ad4c964 btrfs: drop redundant parameters from btrfs_map_sblock
All callers pass 0 for mirror_num and 1 for need_raid_map.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
David Sterba bcc8e07f9e btrfs: sink GFP flags parameter to tree_mod_log_insert_root
All (1) callers pass the same value.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
David Sterba 176ef8f5e6 btrfs: sink GFP flags parameter to tree_mod_log_insert_move
All (1) callers pass the same value.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Liu Bo abad60c601 Btrfs: fix wrong failed mirror_num of read-repair on raid56
In raid56 scenario, after trying parity recovery, we didn't set
mirror_num for btrfs_bio with failed mirror_num, hence
end_bio_extent_readpage() will report a random mirror_num in dmesg
log.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
Liu Bo 1bcd7aa17f Btrfs: set scrub page's io_error if failing to submit io
Scrub repairs data by the unit called scrub_block, which may contain
several pages.  Scrub always tries to look up a good copy of a whole
block, but if there's no such copy, it tries to do repair page by page.

If we don't set page's io_error when checking this bad copy, in the last
step, we may skip this page when repairing bad copy from good copy.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:26 +02:00
David Sterba 171938e528 btrfs: track exclusive filesystem operation in flags
There are several operations, usually started from ioctls, that cannot
run concurrently. The status is tracked in
mutually_exclusive_operation_running as an atomic_t. We can easily track
the status as one of the per-filesystem flag bits with same
synchronization guarantees.

The conversion replaces:

* atomic_xchg(..., 1)    ->   test_and_set_bit(FLAG, ...)
* atomic_set(..., 0)     ->   clear_bit(FLAG, ...)

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Goldwyn Rodrigues 48a89bc4f2 btrfs: qgroups: Retry after commit on getting EDQUOT
We are facing the same problem with EDQUOT which was experienced with
ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but
here is a quick fix, which may be too big a hammer.

Quotas are reserved during the start of an operation, incrementing
qg->reserved. However, it is written to disk in a commit_transaction
which could take as long as commit_interval. In the meantime there
could be deletions which are not accounted for because deletions are
accounted for only while committed (free_refroot). So, when we get
a EDQUOT flush the data to disk and try again.

This fixes fstests btrfs/139.

Here is a sample script which shows this issue.

DEVICE=/dev/vdb
MOUNTPOINT=/mnt
TESTVOL=$MOUNTPOINT/tmp
QUOTA=5
PROG=btrfs
DD_BS="4k"
DD_COUNT="256"
RUN_TIMES=5000

mkfs.btrfs -f $DEVICE
mount -o commit=240 $DEVICE $MOUNTPOINT
$PROG subvolume create $TESTVOL
$PROG quota enable $TESTVOL
$PROG qgroup limit ${QUOTA}G $TESTVOL

typeset -i DD_RUN_GOOD
typeset -i QUOTA

function _check_cmd() {
        if [[ ${?} > 0 ]]; then
                echo -n "$(date) E: Running previous command"
                echo ${*}
                echo "Without sync"
                $PROG qgroup show -pcreFf ${TESTVOL}
                echo "With sync"
                $PROG qgroup show -pcreFf --sync ${TESTVOL}
                exit 1
        fi
}

while true; do
  DD_RUN_GOOD=$RUN_TIMES

  while (( ${DD_RUN_GOOD} != 0 )); do
        dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}
        _check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}"
        DD_RUN_GOOD=(${DD_RUN_GOOD}-1)
  done

  $PROG qgroup show -pcref $TESTVOL
  echo "----------- Cleanup ---------- "
  rm $TESTVOL/quotatest*

done

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Edmund Nadolski de47c9d3ff btrfs: replace hardcoded value with SEQ_LAST macro
Define the SEQ_LAST macro to replace (u64)-1 in places where said
value triggers a special-case ref search behavior.

Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Edmund Nadolski f58d88b336 btrfs: provide enumeration for __merge_refs mode argument
Replace hardcoded numeric values for __merge_refs 'mode' argument
with descriptive constants.

Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
David Sterba f486135eba btrfs: remove unused qgroup members from btrfs_trans_handle
The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe4562d), there's no substitute for
assert_qgroups_uptodate so it's removed as well.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
David Sterba 994a5d2bc7 btrfs: remove local blocksize variable in reada_find_extent
The name is misleading and the local variable serves no purpose.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
David Sterba 5721b8ad26 btrfs: remove redundant parameter from reada_start_machine_dev
We can read fs_info from dev.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
David Sterba 0ceaf28213 btrfs: remove redundant parameter from reada_find_zone
We can read fs_info from dev.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
David Sterba d48d71aa99 btrfs: remove redundant parameter from btree_readahead_hook
We can read fs_info from eb.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
David Sterba 7ef70b4d99 btrfs: preallocate radix tree node for global readahead tree
We can preallocate the node so insertion does not have to do that under
the lock. The GFP flags for the global radix tree are initialized to
 GFP_NOFS & ~__GFP_DIRECT_RECLAIM
but we can use GFP_KERNEL, because readahead is optional and not on any
critical writeout path.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
David Sterba cc8385b59e btrfs: preallocate radix tree node for readahead
We can preallocate the node so insertion does not have to do that under
the lock. The GFP flags for the per-device radix tree are initialized to
 GFP_NOFS & ~__GFP_DIRECT_RECLAIM
but we can use GFP_KERNEL, same as an allocation above anyway, but also
because readahead is optional and not on any critical writeout path.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Goldwyn Rodrigues 4d339d0106 btrfs: No need to check !(flags & MS_RDONLY) twice
Code cleanup.
The code block is for !(*flags & MS_RDONLY). We don't need
to check it again.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Liu Bo 1a79c1f246 Btrfs: update comments in cache_save_setup
We also don't bother to flush free space cache while with free space
tree.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Liu Bo 539b50d2f6 Btrfs: convert BUG_ON to WARN_ON
These two BUG_ON()s would never be true, ensured by callers' logic.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Liu Bo 2b19a1fef7 Btrfs: helper for ops that requires full stripe
This adds a helper to show directly whether ops require full stripe.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Liu Bo 6fad823f49 Btrfs: do not add extra mirror when dev_replace target dev is not available
With this, we can avoid allocating memory for dev replace copies if the
target dev is not available.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:25 +02:00
Liu Bo 73c0f22825 Btrfs: handle operations for device replace separately
Since this part is mostly independent, this moves it to a separate
function.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Liu Bo 5ab56090b8 Btrfs: introduce a function to get extra mirror from replace
As the part of getting extra mirror in __btrfs_map_block is
independent, this puts it into a separate function.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Liu Bo 0b3d4cd371 Btrfs: separate DISCARD from __btrfs_map_block
Since DISCARD is not as important as an operation like write, we don't
copy it to target device during replace, and it makes __btrfs_map_block
less complex.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Liu Bo 592d92eeab Btrfs: create a helper for getting chunk map
We have similar code here and there, this merges them into a helper.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Liu Bo 09ed2f165c Btrfs: add file item tracepoints
While debugging truncate problems, I found that these tracepoints could
help us quickly know what went wrong.

Two sets of tracepoints are created to track regular/prealloc file item
and inline file item respectively, I put inline as a separate one since
what inline file items cares about are way less than the regular one.

This adds four tracepoints:
- btrfs_get_extent_show_fi_regular
- btrfs_get_extent_show_fi_inline
- btrfs_truncate_show_fi_regular
- btrfs_truncate_show_fi_inline

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ formatting adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Elena Reshetova dec95574f4 btrfs: convert btrfs_raid_bio.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Elena Reshetova 99f4cdb16f btrfs: convert scrub_ctx.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Elena Reshetova 78a764504d btrfs: convert scrub_parity.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Elena Reshetova 186debd6ed btrfs: convert scrub_block.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Elena Reshetova 6f615018b3 btrfs: convert scrub_recover.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Elena Reshetova a50299ae7c btrfs: convert compressed_bio.pending_bios from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:24 +02:00
Elena Reshetova b7ac31b7b2 btrfs: convert extent_state.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 0700cea7c8 btrfs: convert btrfs_root.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 089e77e10d btrfs: convert btrfs_delayed_item.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 6de5f18e7b btrfs: convert btrfs_delayed_node.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 6df8cdf5bd btrfs: convert btrfs_delayed_ref_node.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 1e4f4714d5 btrfs: convert btrfs_caching_control.count from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova e76edab7f0 btrfs: convert btrfs_ordered_extent.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 490b54d6fb btrfs: convert extent_map.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 9b64f57ddf btrfs: convert btrfs_transaction.use_count from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Elena Reshetova 140475ae4a btrfs: convert btrfs_bio.refs from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Liu Bo f95fda8751 Btrfs: remove ASSERT in btrfs_truncate_inode_items
After 76b42abbf7 ("Btrfs: fix data loss after truncate when using the
no-holes feature"),

For either NO_HOLES or inline extents, we've set last_size to newsize to
avoid data loss after remount or inode got evicted and read again, thus,
we don't need this check anymore.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Adam Borowski 1450612797 btrfs: fix a bogus warning when converting only data or metadata
If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs
balance -dconvert=raid1", the meta.target field will be uninitialized.
That's otherwise ok, as it's unused except for this warning.

Thus, let's use the existing set of raid levels for the comparison.

As a side effect, non-convert balances will now nag about data>metadata.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-18 14:07:23 +02:00
Linus Torvalds 4b31ac485d Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "Dave Sterba collected a few more fixes for the last rc.

  These aren't marked for stable, but I'm putting them in with a batch
  were testing/sending by hand for this release"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix potential use-after-free for cloned bio
  Btrfs: fix segmentation fault when doing dio read
  Btrfs: fix invalid dereference in btrfs_retry_endio
  btrfs: drop the nossd flag when remounting with -o ssd
2017-04-14 16:53:45 -07:00
Liu Bo a967efb30b Btrfs: fix potential use-after-free for cloned bio
KASAN reports that there is a use-after-free case of bio in btrfs_map_bio.

If we need to submit IOs to several disks at a time, the original bio
would get cloned and mapped to the destination disk, but we really should
use the original bio instead of a cloned bio to do the sanity check
because cloned bios are likely to be freed by its endio.

Reported-by: Diego <diegocg@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-11 18:49:56 +02:00
Liu Bo 97bf5a5589 Btrfs: fix segmentation fault when doing dio read
Commit 2dabb32484 ("Btrfs: Direct I/O read: Work on sectorsized blocks")
introduced this bug during iterating bio pages in dio read's endio hook,
and it could end up with segment fault of the dio reading task.

So the reason is 'if (nr_sectors--)', and it makes the code assume that
there is one more block in the same page, so page offset is increased and
the bio which is created to repair the bad block then has an incorrect
bvec.bv_offset, and a later access of the page content would throw a
segmentation fault.

This also adds ASSERT to check page offset against page size.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-11 18:49:29 +02:00
Liu Bo 2e949b0a55 Btrfs: fix invalid dereference in btrfs_retry_endio
When doing directIO repair, we have this oops:

[ 1458.532816] general protection fault: 0000 [#1] SMP
...
[ 1458.536291] Workqueue: btrfs-endio-repair btrfs_endio_repair_helper [btrfs]
[ 1458.536893] task: ffff88082a42d100 task.stack: ffffc90002b3c000
[ 1458.537499] RIP: 0010:btrfs_retry_endio+0x7e/0x1a0 [btrfs]
...
[ 1458.543261] Call Trace:
[ 1458.543958]  ? rcu_read_lock_sched_held+0xc4/0xd0
[ 1458.544374]  bio_endio+0xed/0x100
[ 1458.544750]  end_workqueue_fn+0x3c/0x40 [btrfs]
[ 1458.545257]  normal_work_helper+0x9f/0x900 [btrfs]
[ 1458.545762]  btrfs_endio_repair_helper+0x12/0x20 [btrfs]
[ 1458.546224]  process_one_work+0x34d/0xb70
[ 1458.546570]  ? process_one_work+0x29e/0xb70
[ 1458.546938]  worker_thread+0x1cf/0x960
[ 1458.547263]  ? process_one_work+0xb70/0xb70
[ 1458.547624]  kthread+0x17d/0x180
[ 1458.547909]  ? kthread_create_on_node+0x70/0x70
[ 1458.548300]  ret_from_fork+0x31/0x40

It turns out that btrfs_retry_endio is trying to get inode from a directIO
page.

This fixes the problem by using the saved inode pointer, done->inode.
btrfs_retry_endio_nocsum has the same problem, and it's fixed as well.

Also cleanup unused @start (which is too trivial for a separate patch).

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-11 18:49:08 +02:00
Adam Borowski 951e796639 btrfs: drop the nossd flag when remounting with -o ssd
The opposite case was already handled right in the very next switch entry.
And also when turning on nossd, drop ssd_spread.

Reported-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-04-11 18:48:59 +02:00
Linus Torvalds fe8e12b503 Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "We have three small fixes queued up in my for-linus-4.11 branch"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix an integer overflow check
  btrfs: Change qgroup_meta_rsv to 64bit
  Btrfs: bring back repair during read
2017-03-31 17:58:48 -07:00
Dan Carpenter 457ae7268b Btrfs: fix an integer overflow check
This isn't super serious because you need CAP_ADMIN to run this code.

I added this integer overflow check last year but apparently I am
rubbish at writing integer overflow checks...  There are two issues.
First, access_ok() works on unsigned long type and not u64 so on 32 bit
systems the access_ok() could be checking a truncated size.  The other
issue is that we should be using a stricter limit so we don't overflow
the kzalloc() setting ctx->clone_roots later in the function after the
access_ok():

	alloc_size = sizeof(struct clone_root) * (arg->clone_sources_count + 1);
	sctx->clone_roots = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN);

Fixes: f5ecec3ce2 ("btrfs: send: silence an integer overflow warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-29 14:29:08 +02:00
Goldwyn Rodrigues ce0dcee626 btrfs: Change qgroup_meta_rsv to 64bit
Using an int value is causing qg->reserved to become negative and
exclusive -EDQUOT to be reached prematurely.

This affects exclusive qgroups only.

TEST CASE:

DEVICE=/dev/vdb
MOUNTPOINT=/mnt
SUBVOL=$MOUNTPOINT/tmp

umount $SUBVOL
umount $MOUNTPOINT

mkfs.btrfs -f $DEVICE
mount /dev/vdb $MOUNTPOINT
btrfs quota enable $MOUNTPOINT
btrfs subvol create $SUBVOL
umount $MOUNTPOINT
mount /dev/vdb $MOUNTPOINT
mount -o subvol=tmp $DEVICE $SUBVOL
btrfs qgroup limit -e 3G $SUBVOL

btrfs quota rescan /mnt -w

for i in `seq 1 44000`; do
  dd if=/dev/zero of=/mnt/tmp/test_$i bs=10k count=1
  if [[ $? > 0 ]]; then
     btrfs qgroup show -pcref $SUBVOL
     exit 1
  fi
done

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[ add reproducer to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-29 14:29:08 +02:00
Liu Bo 9d0d1c8b1c Btrfs: bring back repair during read
Commit 20a7db8ab3 ("btrfs: add dummy callback for readpage_io_failed
and drop checks") made a cleanup around readpage_io_failed_hook, and
it was supposed to keep the original sematics, but it also
unexpectedly disabled repair during read for dup, raid1 and raid10.

This fixes the problem by letting data's inode call the generic
readpage_io_failed callback by returning -EAGAIN from its
readpage_io_failed_hook in order to notify end_bio_extent_readpage to
do the rest.  We don't call it directly because the generic one takes
an offset from end_bio_extent_readpage() to calculate the index in the
checksum array and inode's readpage_io_failed_hook doesn't offer that
offset.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ keep the const function attribute ]
Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-29 14:29:07 +02:00
Linus Torvalds 131fbf4f9c Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "Zygo tracked down a very old bug with inline compressed extents.

  I didn't tag this one for stable because I want to do individual
  tested backports. It's a little tricky and I'd rather do some extra
  testing on it along the way"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: add missing memset while reading compressed inline extents
  Btrfs: fix regression in lock_delalloc_pages
  btrfs: remove btrfs_err_str function from uapi/linux/btrfs.h
2017-03-23 11:39:33 -07:00
Zygo Blaxell e1699d2d7b btrfs: add missing memset while reading compressed inline extents
This is a story about 4 distinct (and very old) btrfs bugs.

Commit c8b978188c ("Btrfs: Add zlib compression support") added
three data corruption bugs for inline extents (bugs #1-3).

Commit 93c82d5750 ("Btrfs: zero page past end of inline file items")
fixed bug #1:  uncompressed inline extents followed by a hole and more
extents could get non-zero data in the hole as they were read.  The fix
was to add a memset in btrfs_get_extent to zero out the hole.

Commit 166ae5a418 ("btrfs: fix inline compressed read err corruption")
fixed bug #2:  compressed inline extents which contained non-zero bytes
might be replaced with zero bytes in some cases.  This patch removed an
unhelpful memset from uncompress_inline, but the case where memset is
required was missed.

There is also a memset in the decompression code, but this only covers
decompressed data that is shorter than the ram_bytes from the extent
ref record.  This memset doesn't cover the region between the end of the
decompressed data and the end of the page.  It has also moved around a
few times over the years, so there's no single patch to refer to.

This patch fixes bug #3:  compressed inline extents followed by a hole
and more extents could get non-zero data in the hole as they were read
(i.e. bug #3 is the same as bug #1, but s/uncompressed/compressed/).
The fix is the same:  zero out the hole in the compressed case too,
by putting a memset back in uncompress_inline, but this time with
correct parameters.

The last and oldest bug, bug #0, is the cause of the offending inline
extent/hole/extent pattern.  Bug #0 is a subtle and mostly-harmless quirk
of behavior somewhere in the btrfs write code.  In a few special cases,
an inline extent and hole are allowed to persist where they normally
would be combined with later extents in the file.

A fast reproducer for bug #0 is presented below.  A few offending extents
are also created in the wild during large rsync transfers with the -S
flag.  A Linux kernel build (git checkout; make allyesconfig; make -j8)
will produce a handful of offending files as well.  Once an offending
file is created, it can present different content to userspace each
time it is read.

Bug #0 is at least 4 and possibly 8 years old.  I verified every vX.Y
kernel back to v3.5 has this behavior.  There are fossil records of this
bug's effects in commits all the way back to v2.6.32.  I have no reason
to believe bug #0 wasn't present at the beginning of btrfs compression
support in v2.6.29, but I can't easily test kernels that old to be sure.

It is not clear whether bug #0 is worth fixing.  A fix would likely
require injecting extra reads into currently write-only paths, and most
of the exceptional cases caused by bug #0 are already handled now.

Whether we like them or not, bug #0's inline extents followed by holes
are part of the btrfs de-facto disk format now, and we need to be able
to read them without data corruption or an infoleak.  So enough about
bug #0, let's get back to bug #3 (this patch).

An example of on-disk structure leading to data corruption found in
the wild:

        item 61 key (606890 INODE_ITEM 0) itemoff 9662 itemsize 160
                inode generation 50 transid 50 size 47424 nbytes 49141
                block group 0 mode 100644 links 1 uid 0 gid 0
                rdev 0 flags 0x0(none)
        item 62 key (606890 INODE_REF 603050) itemoff 9642 itemsize 20
                inode ref index 3 namelen 10 name: DB_File.so
        item 63 key (606890 EXTENT_DATA 0) itemoff 8280 itemsize 1362
                inline extent data size 1341 ram 4085 compress(zlib)
        item 64 key (606890 EXTENT_DATA 4096) itemoff 8227 itemsize 53
                extent data disk byte 5367308288 nr 20480
                extent data offset 0 nr 45056 ram 45056
                extent compression(zlib)

Different data appears in userspace during each read of the 11 bytes
between 4085 and 4096.  The extent in item 63 is not long enough to
fill the first page of the file, so a memset is required to fill the
space between item 63 (ending at 4085) and item 64 (beginning at 4096)
with zero.

Here is a reproducer from Liu Bo, which demonstrates another method
of creating the same inline extent and hole pattern:

Using 'page_poison=on' kernel command line (or enable
CONFIG_PAGE_POISONING) run the following:

	# touch foo
	# chattr +c foo
	# xfs_io -f -c "pwrite -W 0 1000" foo
	# xfs_io -f -c "falloc 4 8188" foo
	# od -x foo
	# echo 3 >/proc/sys/vm/drop_caches
	# od -x foo

This produce the following on my box:

Correct output:  file contains 1000 data bytes followed
by zeros:

	0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
	*
	0001740 cdcd cdcd cdcd cdcd 0000 0000 0000 0000
	0001760 0000 0000 0000 0000 0000 0000 0000 0000
	*
	0020000

Actual output:  the data after the first 1000 bytes
will be different each run:

	0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
	*
	0001740 cdcd cdcd cdcd cdcd 6c63 7400 635f 006d
	0001760 5f74 6f43 7400 435f 0053 5f74 7363 7400
	0002000 435f 0056 5f74 6164 7400 645f 0062 5f74
	(...)

Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2017-03-17 13:47:10 -07:00
Liu Bo 49d4a33472 Btrfs: fix regression in lock_delalloc_pages
The bug is a regression after commit
(da2c7009f6 "btrfs: teach __process_pages_contig about PAGE_LOCK operation")
and commit
(76c0021db8 "Btrfs: use helper to simplify lock/unlock pages").

So if the dirty pages which are under writeback got truncated partially
before we lock the dirty pages, we couldn't find all pages mapping to the
delalloc range, and the bug didn't return an error so it kept going on and
found that the delalloc range got truncated and got to unlock the dirty
pages, and then the ASSERT could caught the error, and showed

-----------------------------------------------------------------------------
assertion failed: page_ops & PAGE_LOCK, file: fs/btrfs/extent_io.c, line: 1716
-----------------------------------------------------------------------------

This fixes the bug by returning the proper -EAGAIN.

Cc: David Sterba <dsterba@suse.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-03-17 13:47:09 -07:00
Linus Torvalds 590dce2d49 Merge branch 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs 'statx()' update from Al Viro.

This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.

It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?

From David Howells.

Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:

    https://www.spinics.net/lists/linux-fsdevel/msg33831.html

* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  statx: Add a system call to make enhanced file info available
2017-03-03 11:38:56 -08:00
Linus Torvalds 1827adb11a Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched.h split-up from Ingo Molnar:
 "The point of these changes is to significantly reduce the
  <linux/sched.h> header footprint, to speed up the kernel build and to
  have a cleaner header structure.

  After these changes the new <linux/sched.h>'s typical preprocessed
  size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
  lines), which is around 40% faster to build on typical configs.

  Not much changed from the last version (-v2) posted three weeks ago: I
  eliminated quirks, backmerged fixes plus I rebased it to an upstream
  SHA1 from yesterday that includes most changes queued up in -next plus
  all sched.h changes that were pending from Andrew.

  I've re-tested the series both on x86 and on cross-arch defconfigs,
  and did a bisectability test at a number of random points.

  I tried to test as many build configurations as possible, but some
  build breakage is probably still left - but it should be mostly
  limited to architectures that have no cross-compiler binaries
  available on kernel.org, and non-default configurations"

* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
  sched/headers: Clean up <linux/sched.h>
  sched/headers: Remove #ifdefs from <linux/sched.h>
  sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
  sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
  sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
  sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
  sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
  sched/core: Remove unused prefetch_stack()
  sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
  sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
  sched/headers: Remove <linux/signal.h> from <linux/sched.h>
  sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
  sched/headers: Remove the runqueue_is_locked() prototype
  sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
  sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
  sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
  ...
2017-03-03 10:16:38 -08:00
David Howells a528d35e8b statx: Add a system call to make enhanced file info available
Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode.  This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included.  The
following have been included:

 (1) Make the fields a consistent size on all arches and make them large.

 (2) Spare space, request flags and information flags are provided for
     future expansion.

 (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
     __s64).

 (4) Creation time: The SMB protocol carries the creation time, which could
     be exported by Samba, which will in turn help CIFS make use of
     FS-Cache as that can be used for coherency data (stx_btime).

     This is also specified in NFSv4 as a recommended attribute and could
     be exported by NFSD [Steve French].

 (5) Lightweight stat: Ask for just those details of interest, and allow a
     netfs (such as NFS) to approximate anything not of interest, possibly
     without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
     Dilger] (AT_STATX_DONT_SYNC).

 (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
     its cached attributes are up to date [Trond Myklebust]
     (AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

 (7) Data version number: Could be used by userspace NFS servers [Aneesh
     Kumar].

     Can also be used to modify fill_post_wcc() in NFSD which retrieves
     i_version directly, but has just called vfs_getattr().  It could get
     it from the kstat struct if it used vfs_xgetattr() instead.

     (There's disagreement on the exact semantics of a single field, since
     not all filesystems do this the same way).

 (8) BSD stat compatibility: Including more fields from the BSD stat such
     as creation time (st_btime) and inode generation number (st_gen)
     [Jeremy Allison, Bernd Schubert].

 (9) Inode generation number: Useful for FUSE and userspace NFS servers
     [Bernd Schubert].

     (This was asked for but later deemed unnecessary with the
     open-by-handle capability available and caused disagreement as to
     whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

     (No particular data were offered, but things like last backup
     timestamp, the data version number and the DOS archive bit would come
     into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
     filesystem can now say it doesn't support a standard stat feature if
     that isn't available, so if, for instance, inode numbers or UIDs don't
     exist or are fabricated locally...

     (This requires a separate system call - I have an fsinfo() call idea
     for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
     struct xstat [Steve French].

     (Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
     granularity of each of the times (NFSv4 time_delta) [Steve French].

     (Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value.  These could be translated to BSD's st_flags.
     Note that the Linux IOC flags are a mess and filesystems such as Ext4
     define flags that aren't in linux/fs.h, so translation in the kernel
     may be a necessity (or, possibly, we provide the filesystem type too).

     (Some attributes are made available in stx_attributes, but the general
     feeling was that the IOC flags were to ext[234]-specific and shouldn't
     be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
     Michael Kerrisk].

     (Deferred, probably to fsinfo.  Finding out if there's an ACL or
     seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

     (A __reserved field has been left in the statx_timestamp struct for
     this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

	int ret = statx(int dfd,
			const char *filename,
			unsigned int flags,
			unsigned int mask,
			struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat().  There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags.  There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

 (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
     respect.

 (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
     its attributes with the server - which might require data writeback to
     occur to get the timestamps correct.

 (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
     network filesystem.  The resulting values should be considered
     approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller.  The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat().  It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data.  This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

	struct statx_timestamp {
		__s64	tv_sec;
		__s32	tv_nsec;
		__s32	__reserved;
	};

	struct statx {
		__u32	stx_mask;
		__u32	stx_blksize;
		__u64	stx_attributes;
		__u32	stx_nlink;
		__u32	stx_uid;
		__u32	stx_gid;
		__u16	stx_mode;
		__u16	__spare0[1];
		__u64	stx_ino;
		__u64	stx_size;
		__u64	stx_blocks;
		__u64	__spare1[1];
		struct statx_timestamp	stx_atime;
		struct statx_timestamp	stx_btime;
		struct statx_timestamp	stx_ctime;
		struct statx_timestamp	stx_mtime;
		__u32	stx_rdev_major;
		__u32	stx_rdev_minor;
		__u32	stx_dev_major;
		__u32	stx_dev_minor;
		__u64	__spare2[14];
	};

The defined bits in request_mask and stx_mask are:

	STATX_TYPE		Want/got stx_mode & S_IFMT
	STATX_MODE		Want/got stx_mode & ~S_IFMT
	STATX_NLINK		Want/got stx_nlink
	STATX_UID		Want/got stx_uid
	STATX_GID		Want/got stx_gid
	STATX_ATIME		Want/got stx_atime{,_ns}
	STATX_MTIME		Want/got stx_mtime{,_ns}
	STATX_CTIME		Want/got stx_ctime{,_ns}
	STATX_INO		Want/got stx_ino
	STATX_SIZE		Want/got stx_size
	STATX_BLOCKS		Want/got stx_blocks
	STATX_BASIC_STATS	[The stuff in the normal stat struct]
	STATX_BTIME		Want/got stx_btime{,_ns}
	STATX_ALL		[All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution.  Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does.  The following
attributes map to FS_*_FL flags and are the same numerical value:

	STATX_ATTR_COMPRESSED		File is compressed by the fs
	STATX_ATTR_IMMUTABLE		File is marked immutable
	STATX_ATTR_APPEND		File is append-only
	STATX_ATTR_NODUMP		File is not to be dumped
	STATX_ATTR_ENCRYPTED		File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

	KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

	STATX_ATTR_AUTOMOUNT		Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

 (0) stx_dev_*, stx_blksize.

     These are local system information and are always available.

 (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
     stx_size, stx_blocks.

     These will be returned whether the caller asks for them or not.  The
     corresponding bits in stx_mask will be set to indicate whether they
     actually have valid values.

     If the caller didn't ask for them, then they may be approximated.  For
     example, NFS won't waste any time updating them from the server,
     unless as a byproduct of updating something requested.

     If the values don't actually exist for the underlying object (such as
     UID or GID on a DOS file), then the bit won't be set in the stx_mask,
     even if the caller asked for the value.  In such a case, the returned
     value will be a fabrication.

     Note that there are instances where the type might not be valid, for
     instance Windows reparse points.

 (2) stx_rdev_*.

     This will be set only if stx_mode indicates we're looking at a
     blockdev or a chardev, otherwise will be 0.

 (3) stx_btime.

     Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

	samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output.  Firstly, an NFS directory that crosses to
another FSID.  Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

	[root@andromeda ~]# /tmp/test-statx -A /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:26           Inode: 1703937     Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000
	Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

	[root@andromeda ~]# /tmp/test-statx /warthog/data
	statx(/warthog/data) = 0
	results=7ff
	  Size: 4096            Blocks: 8          IO Block: 1048576  directory
	Device: 00:27           Inode: 2           Links: 125
	Access: (3777/drwxrwxrwx)  Uid:     0   Gid:  4041
	Access: 2016-11-24 09:02:12.219699527+0000
	Modify: 2016-11-17 10:44:36.225653653+0000
	Change: 2016-11-17 10:44:36.225653653+0000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-02 20:51:15 -05:00
Linus Torvalds bbe08c0a43 Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull more btrfs updates from Chris Mason:
 "Btrfs round two.

  These are mostly a continuation of Dave Sterba's collection of
  cleanups, but Filipe also has some bug fixes and performance
  improvements"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (69 commits)
  btrfs: add dummy callback for readpage_io_failed and drop checks
  btrfs: drop checks for mandatory extent_io_ops callbacks
  btrfs: document existence of extent_io ops callbacks
  btrfs: let writepage_end_io_hook return void
  btrfs: do proper error handling in btrfs_insert_xattr_item
  btrfs: handle allocation error in update_dev_stat_item
  btrfs: remove BUG_ON from __tree_mod_log_insert
  btrfs: derive maximum output size in the compression implementation
  btrfs: use predefined limits for calculating maximum number of pages for compression
  btrfs: export compression buffer limits in a header
  btrfs: merge nr_pages input and output parameter in compress_pages
  btrfs: merge length input and output parameter in compress_pages
  btrfs: constify name of subvolume in creation helpers
  btrfs: constify buffers used by compression helpers
  btrfs: constify input buffer of btrfs_csum_data
  btrfs: constify device path passed to relevant helpers
  btrfs: make btrfs_inode_resume_unlocked_dio take btrfs_inode
  btrfs: make btrfs_inode_block_unlocked_dio take btrfs_inode
  btrfs: Make btrfs_add_nondir take btrfs_inode
  btrfs: Make btrfs_add_link take btrfs_inode
  ...
2017-03-02 16:03:00 -08:00
Ingo Molnar f361bf4a66 sched/headers: Prepare for the reduction of <linux/sched.h>'s signal API dependency
Instead of including the full <linux/signal.h>, we are going to include the
types-only <linux/signal_types.h> header in <linux/sched.h>, to further
decouple the scheduler header from the signal headers.

This means that various files which relied on the full <linux/signal.h> need
to be updated to gain an explicit dependency on it.

Update the code that relies on sched.h's inclusion of the <linux/signal.h> header.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:37 +01:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Chris Mason e9f467d028 Merge branch 'for-chris-4.11-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.11 2017-02-28 14:35:09 -08:00
David Sterba 20a7db8ab3 btrfs: add dummy callback for readpage_io_failed and drop checks
Make extent_io_ops::readpage_io_failed_hook callback mandatory and
define a dummy function for btrfs_extent_io_ops. As the failed IO
callback is not performance critical, the branch vs extra trade off does
not hurt.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:29:24 +01:00
David Sterba 20c9801d39 btrfs: drop checks for mandatory extent_io_ops callbacks
We know that eadpage_end_io_hook, submit_bio_hook and merge_bio_hook are
always defined so we can drop the checks before we call them.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:29:24 +01:00
David Sterba 4d53dddbec btrfs: document existence of extent_io ops callbacks
Some of the callbacks defined in btree_extent_io_ops and
btrfs_extent_io_ops do always exist so we don't need to check the
existence before each call. This patch just reorders the definition and
documents which are mandatory/optional.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:29:24 +01:00
David Sterba c3988d630a btrfs: let writepage_end_io_hook return void
There's no error path in any of the instances, always return 0.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:29:24 +01:00
David Sterba b9d04c607c btrfs: do proper error handling in btrfs_insert_xattr_item
The space check in btrfs_insert_xattr_item is duplicated in it's caller
(do_setxattr) so we won't hit the BUG_ON. Continuing without any check
could be disasterous so turn it to a proper error handling.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:27:11 +01:00
David Sterba fa2529923d btrfs: handle allocation error in update_dev_stat_item
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:27:11 +01:00
David Sterba 047e5e17c1 btrfs: remove BUG_ON from __tree_mod_log_insert
All callers dereference the 'tm' parameter before it gets to this
function, the NULL check does not make much sense here.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:27:11 +01:00
David Sterba e5d7490236 btrfs: derive maximum output size in the compression implementation
The value of max_out can be calculated from the parameters passed to the
compressors, which is number of pages and the page size, and we don't
have to needlessly pass it around.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:36 +01:00
David Sterba 069eac7850 btrfs: use predefined limits for calculating maximum number of pages for compression
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:35 +01:00
David Sterba ff7638665c btrfs: export compression buffer limits in a header
Move the buffer limit definitions out of compress_file_range.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:35 +01:00
David Sterba 4d3a800ebb btrfs: merge nr_pages input and output parameter in compress_pages
The parameter saying how many pages can be allocated at maximum can be
merged with the output page counter, to save some stack space.  The
compression implementation will sink the parameter to a local variable
so everything works as before.

The nr_pages variables can also be simply merged in compress_file_range
into one.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:35 +01:00
David Sterba 38c3146408 btrfs: merge length input and output parameter in compress_pages
The length parameter is basically duplicated for input and output in the
top level caller of the compress_pages chain. We can simply use one
variable for that and reduce stack consumption. The compression
implementation will sink the parameter to a local variable so everything
works as before.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:35 +01:00
David Sterba 52f75f4fe7 btrfs: constify name of subvolume in creation helpers
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:08 +01:00
David Sterba 14a3357b40 btrfs: constify buffers used by compression helpers
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:07 +01:00
David Sterba 9ed573674a btrfs: constify input buffer of btrfs_csum_data
The function does not modify the input buffer, also update a typecast in
one caller.

Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:07 +01:00
David Sterba da353f6b30 btrfs: constify device path passed to relevant helpers
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 14:26:07 +01:00
Nikolay Borisov 0b581701d9 btrfs: make btrfs_inode_resume_unlocked_dio take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:12 +01:00
Nikolay Borisov abcefb1eee btrfs: make btrfs_inode_block_unlocked_dio take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:12 +01:00
Nikolay Borisov cef415af20 btrfs: Make btrfs_add_nondir take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:12 +01:00
Nikolay Borisov db0a669fb0 btrfs: Make btrfs_add_link take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov 9e3e97f45c btrfs: Make btrfs_del_delalloc_inode take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov fc4f21b1d8 btrfs: Make get_extent_t take btrfs_inode
In addition to changing the signature, this patch also switches
all the functions which are used as an argument to also take btrfs_inode.
Namely those are: btrfs_get_extent and btrfs_get_extent_filemap.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov 1c8c9c5216 btrfs: Make check_extent_to_block take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov a2f392e401 btrfs: Make clone_update_extent_map take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov 6fc0ef6870 btrfs: Make btrfs_clear_bit_hook take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov 9cdc512410 btrfs: Make btrfs_extent_item_to_extent_map take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:11 +01:00
Nikolay Borisov 19df27a9e4 btrfs: make btrfs_log_inode_parent take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:10 +01:00
Nikolay Borisov aefa6115c0 btrfs: Make check_parent_dirs_for_sync take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:10 +01:00
Nikolay Borisov 73f2e545b6 btrfs: Make btrfs_orphan_add take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:10 +01:00
Nikolay Borisov 3d6ae7bb6a btrfs: make btrfs_orphan_del take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:10 +01:00
Nikolay Borisov 7ab7956ec3 btrfs: make btrfs_free_io_failure_record take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:10 +01:00
Nikolay Borisov b30cb441fc btrfs: make clean_io_failure take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:10 +01:00
Nikolay Borisov 9d4f7f8ad6 btrfs: make repair_io_failure take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:09 +01:00
Nikolay Borisov f898ac6ae3 btrfs: make check_compressed_csum take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:09 +01:00
Nikolay Borisov 0970a22e58 btrfs: make btrfs_print_data_csum_error take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:09 +01:00
Nikolay Borisov 4ac1f4acd7 btrfs: make free_io_failure take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:09 +01:00
Nikolay Borisov 2cff578cfc btrfs: Make lock_and_cleanup_extent_if_need take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:09 +01:00
Nikolay Borisov 85b7ab6705 btrfs: Make check_can_nocow take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:09 +01:00
Nikolay Borisov a776c6fa1f btrfs: Make btrfs_lookup_ordered_range take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:08 +01:00
Nikolay Borisov 7a6d706795 btrfs: Make btrfs_mark_extent_written take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:08 +01:00
Nikolay Borisov a012a74e78 btrfs: Make fill_holes take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:08 +01:00
Nikolay Borisov 35339c245b btrfs: Make hole_mergeable take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:08 +01:00
Nikolay Borisov dcdbc059f0 btrfs: Make btrfs_drop_extent_cache take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:08 +01:00
Nikolay Borisov 46e5979183 btrfs: Make btrfs_requeue_inode_defrag take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov 6158e1ce1c btrfs: Make (__)btrfs_add_inode_defrag take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov 691fa05967 btrfs: all btrfs_delalloc_release_metadata take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov 9f3db423f9 btrfs: Make btrfs_delalloc_reserve_metadata take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov 703b391a03 btrfs: Make btrfs_orphan_release_metadata take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov 8ed7a2a0e0 btrfs: Make btrfs_orphan_reserve_metadata take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov 0e6bf9b13c btrfs: Make calc_csum_metadata_size take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov baa3ba39b9 btrfs: Make drop_outstanding_extent take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:07 +01:00
Nikolay Borisov 04f4f91653 btrfs: make btrfs_alloc_data_chunk_ondemand take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:06 +01:00
Nikolay Borisov 70ddc553b5 btrfs: make btrfs_is_free_space_inode take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:06 +01:00
Nikolay Borisov 6ef06d2790 btrfs: Make btrfs_i_size_write take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:06 +01:00
Nikolay Borisov 877574e254 btrfs: Make btrfs_set_inode_index take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:06 +01:00
Nikolay Borisov 4c570655f4 btrfs: make btrfs_set_inode_index_count take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:06 +01:00
Nikolay Borisov 8e7611cf38 btrfs: Make btrfs_insert_dir_item take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:06 +01:00
Nikolay Borisov d0a0b78de4 btrfs: Make btrfs_log_all_parents take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-28 11:30:05 +01:00
Fabian Frederick 93407472a2 fs: add i_blocksize()
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.

This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'

Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.

[geliangtang@gmail.com: truncate: use i_blocksize()]
  Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Linus Torvalds 9003ed1fed Merge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "This has a series of fixes and cleanups that Dave Sterba has been
  collecting.

  There is a pretty big variety here, cleaning up internal APIs and
  fixing corner cases"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (124 commits)
  Btrfs: use the correct type when creating cow dio extent
  Btrfs: fix deadlock between dedup on same file and starting writeback
  btrfs: use btrfs_debug instead of pr_debug in transaction abort
  btrfs: btrfs_truncate_free_space_cache always allocates path
  btrfs: free-space-cache, clean up unnecessary root arguments
  btrfs: convert btrfs_inc_block_group_ro to accept fs_info
  btrfs: flush_space always takes fs_info->fs_root
  btrfs: pass fs_info to (more) routines that are only called with extent_root
  btrfs: qgroup: Move half of the qgroup accounting time out of commit trans
  btrfs: remove unused parameter from adjust_slots_upwards
  btrfs: remove unused parameters from __btrfs_write_out_cache
  btrfs: remove unused parameter from cleanup_write_cache_enospc
  btrfs: remove unused parameter from __add_inode_ref
  btrfs: remove unused parameter from clone_copy_inline_extent
  btrfs: remove unused parameters from btrfs_cmp_data
  btrfs: remove unused parameter from __add_inline_refs
  btrfs: remove unused parameters from scrub_setup_wr_ctx
  btrfs: remove unused parameter from create_snapshot
  btrfs: remove unused parameter from init_first_rw_device
  btrfs: remove unused parameter from __btrfs_alloc_chunk
  ...
2017-02-25 14:53:58 -08:00
Dave Jiang 11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Filipe Manana 263d3995c9 Btrfs: try harder to migrate items to left sibling before splitting a leaf
Before attempting to split a leaf we try to migrate items from the leaf to
its right and left siblings. We start by trying to move items into the
rigth sibling and, if the new item is meant to be inserted at the end of
our leaf, we try to free from our leaf an amount of bytes equal to the
number of bytes used by the new item, by setting the variable space_needed
to the byte size of that new item. However if we fail to move enough items
to the right sibling due to lack of space in that sibling, we then try
to move items into the left sibling, and in that case we try to free
an amount equal to the size of the new item from our leaf, when we need
only to free an amount corresponding to the size of the new item minus
the current free space of our leaf. So make sure that before we try to
move items to the left sibling we do set the variable space_needed with
a value corresponding to the new item's size minus the leaf's current
free space.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-02-24 00:39:44 +00:00
Filipe Manana 76b42abbf7 Btrfs: fix data loss after truncate when using the no-holes feature
If we have a file with an implicit hole (NO_HOLES feature enabled) that
has an extent following the hole, delayed writes against regions of the
file behind the hole happened before but were not yet flushed and then
we truncate the file to a smaller size that lies inside the hole, we
end up persisting a wrong disk_i_size value for our inode that leads to
data loss after umounting and mounting again the filesystem or after
the inode is evicted and loaded again.

This happens because at inode.c:btrfs_truncate_inode_items() we end up
setting last_size to the offset of the extent that we deleted and that
followed the hole. We then pass that value to btrfs_ordered_update_i_size()
which updates the inode's disk_i_size to a value smaller then the offset
of the buffered (delayed) writes.

Example reproducer:

 $ mkfs.btrfs -f /dev/sdb
 $ mount /dev/sdb /mnt

 $ xfs_io -f -c "pwrite -S 0x01 0K 32K" /mnt/foo
 $ xfs_io -d -c "pwrite -S 0x02 -b 32K 64K 32K" /mnt/foo
 $ xfs_io -c "truncate 60K" /mnt/foo
   --> inode's disk_i_size updated to 0

 $ md5sum /mnt/foo
 3c5ca3c3ab42f4b04d7e7eb0b0d4d806  /mnt/foo

 $ umount /dev/sdb
 $ mount /dev/sdb /mnt

 $ md5sum /mnt/foo
 d41d8cd98f00b204e9800998ecf8427e  /mnt/foo
   --> Empty file, all data lost!

Cc: <stable@vger.kernel.org>  # 3.14+
Fixes: 16e7549f04 ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-02-24 00:39:31 +00:00
Filipe Manana 82bfb2e7b6 Btrfs: incremental send, fix unnecessary hole writes for sparse files
When using the NO_HOLES feature, during an incremental send we often issue
write operations for holes when we should not, because that range is already
a hole in the destination snapshot. While that does not change the contents
of the file at the receiver, it avoids preservation of file holes, leading
to wasted disk space and extra IO during send/receive.

A couple examples where the holes are not preserved follows.

 $ mkfs.btrfs -O no-holes -f /dev/sdb
 $ mount /dev/sdb /mnt
 $ xfs_io -f -c "pwrite -S 0xaa 0 4K" /mnt/foo
 $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "pwrite -S 0xbb 1028K 4K" /mnt/bar
 $ btrfs subvolume snapshot -r /mnt /mnt/snap1

 # Now add one new extent to our first test file, increasing its size and
 # leaving a 1Mb hole between the first extent and this new extent.
 $ xfs_io -c "pwrite -S 0xbb 1028K 4K" /mnt/foo

 # Now overwrite the last extent of our second test file.
 $ xfs_io -c "pwrite -S 0xcc 1028K 4K" /mnt/bar

 $ btrfs subvolume snapshot -r /mnt /mnt/snap2

 $ xfs_io -r -c "fiemap -v" /mnt/snap2/foo
 /mnt/snap2/foo:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..7]:          25088..25095         8 0x2000
   1: [8..2055]:       hole              2048
   2: [2056..2063]:    24576..24583         8 0x2001

 $ xfs_io -r -c "fiemap -v" /mnt/snap2/bar
 /mnt/snap2/bar:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..7]:          25096..25103         8 0x2000
   1: [8..2055]:       hole              2048
   2: [2056..2063]:    24584..24591         8 0x2001

  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap

  $ umount /mnt
  # It's not relevant to enable no-holes in the new filesystem.
  $ mkfs.btrfs -O no-holes -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ btrfs receive /mnt -f /tmp/1.snap
  $ btrfs receive /mnt -f /tmp/2.snap

  $ xfs_io -r -c "fiemap -v" /mnt/snap2/foo
  /mnt/snap2/foo:
  EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
    0: [0..7]:          24576..24583         8 0x2000
    1: [8..2063]:       25624..27679      2056   0x1

  $ xfs_io -r -c "fiemap -v" /mnt/snap2/bar
  /mnt/snap2/bar:
  EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
    0: [0..7]:          24584..24591         8 0x2000
    1: [8..2063]:       27680..29735      2056   0x1

The holes do not exist in the second filesystem and they were replaced
with extents filled with the byte 0x00, making each file take 1032Kb of
space instead of 8Kb.

So fix this by not issuing the write operations consisting of buffers
filled with the byte 0x00 when the destination snapshot already has a
hole for the respective range.

A test case for fstests will follow soon.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-02-24 00:39:21 +00:00
Filipe Manana a9b9477db2 Btrfs: fix use-after-free due to wrong order of destroying work queues
Before we destroy all work queues (and wait for their tasks to complete)
we were destroying the work queues used for metadata I/O operations, which
can result in a use-after-free problem because most tasks from all work
queues do metadata I/O operations. For example, the tasks from the caching
workers work queue (fs_info->caching_workers), which is destroyed only
after the work queue used for metadata reads (fs_info->endio_meta_workers)
is destroyed, do metadata reads, which result in attempts to queue tasks
into the later work queue, triggering a use-after-free with a trace like
the following:

[23114.613543] general protection fault: 0000 [#1] PREEMPT SMP
[23114.614442] Modules linked in: dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c btrfs xor raid6_pq dm_flakey dm_mod crc32c_generic
acpi_cpufreq tpm_tis tpm_tis_core tpm ppdev parport_pc parport i2c_piix4 processor sg evdev i2c_core psmouse pcspkr serio_raw button loop autofs4 ext4 crc16
jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio e1000 scsi_mod floppy [last unloaded: scsi_debug]
[23114.616932] CPU: 9 PID: 4537 Comm: kworker/u32:8 Not tainted 4.9.0-rc7-btrfs-next-36+ #1
[23114.616932] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[23114.616932] Workqueue: btrfs-cache btrfs_cache_helper [btrfs]
[23114.616932] task: ffff880221d45780 task.stack: ffffc9000bc50000
[23114.616932] RIP: 0010:[<ffffffffa037c1bf>]  [<ffffffffa037c1bf>] btrfs_queue_work+0x2c/0x190 [btrfs]
[23114.616932] RSP: 0018:ffff88023f443d60  EFLAGS: 00010246
[23114.616932] RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b6b RCX: 0000000000000102
[23114.616932] RDX: ffffffffa0419000 RSI: ffff88011df534f0 RDI: ffff880101f01c00
[23114.616932] RBP: ffff88023f443d80 R08: 00000000000f7000 R09: 000000000000ffff
[23114.616932] R10: ffff88023f443d48 R11: 0000000000001000 R12: ffff88011df534f0
[23114.616932] R13: ffff880135963868 R14: 0000000000001000 R15: 0000000000001000
[23114.616932] FS:  0000000000000000(0000) GS:ffff88023f440000(0000) knlGS:0000000000000000
[23114.616932] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[23114.616932] CR2: 00007f0fb9f8e520 CR3: 0000000001a0b000 CR4: 00000000000006e0
[23114.616932] Stack:
[23114.616932]  ffff880101f01c00 ffff88011df534f0 ffff880135963868 0000000000001000
[23114.616932]  ffff88023f443da0 ffffffffa03470af ffff880149b37200 ffff880135963868
[23114.616932]  ffff88023f443db8 ffffffff8125293c ffff880149b37200 ffff88023f443de0
[23114.616932] Call Trace:
[23114.616932]  <IRQ> [23114.616932]  [<ffffffffa03470af>] end_workqueue_bio+0xd5/0xda [btrfs]
[23114.616932]  [<ffffffff8125293c>] bio_endio+0x54/0x57
[23114.616932]  [<ffffffffa0377929>] btrfs_end_bio+0xf7/0x106 [btrfs]
[23114.616932]  [<ffffffff8125293c>] bio_endio+0x54/0x57
[23114.616932]  [<ffffffff8125955f>] blk_update_request+0x21a/0x30f
[23114.616932]  [<ffffffffa0022316>] scsi_end_request+0x31/0x182 [scsi_mod]
[23114.616932]  [<ffffffffa00235fc>] scsi_io_completion+0x1ce/0x4c8 [scsi_mod]
[23114.616932]  [<ffffffffa001ba9d>] scsi_finish_command+0x104/0x10d [scsi_mod]
[23114.616932]  [<ffffffffa002311f>] scsi_softirq_done+0x101/0x10a [scsi_mod]
[23114.616932]  [<ffffffff8125fbd9>] blk_done_softirq+0x82/0x8d
[23114.616932]  [<ffffffff814c8a4b>] __do_softirq+0x1ab/0x412
[23114.616932]  [<ffffffff8105b01d>] irq_exit+0x49/0x99
[23114.616932]  [<ffffffff81035135>] smp_call_function_single_interrupt+0x24/0x26
[23114.616932]  [<ffffffff814c7ec9>] call_function_single_interrupt+0x89/0x90
[23114.616932]  <EOI> [23114.616932]  [<ffffffffa0023262>] ? scsi_request_fn+0x13a/0x2a1 [scsi_mod]
[23114.616932]  [<ffffffff814c5966>] ? _raw_spin_unlock_irq+0x2c/0x4a
[23114.616932]  [<ffffffff814c596c>] ? _raw_spin_unlock_irq+0x32/0x4a
[23114.616932]  [<ffffffff814c5966>] ? _raw_spin_unlock_irq+0x2c/0x4a
[23114.616932]  [<ffffffffa0023262>] scsi_request_fn+0x13a/0x2a1 [scsi_mod]
[23114.616932]  [<ffffffff8125590e>] __blk_run_queue_uncond+0x22/0x2b
[23114.616932]  [<ffffffff81255930>] __blk_run_queue+0x19/0x1b
[23114.616932]  [<ffffffff8125ab01>] blk_queue_bio+0x268/0x282
[23114.616932]  [<ffffffff81258f44>] generic_make_request+0xbd/0x160
[23114.616932]  [<ffffffff812590e7>] submit_bio+0x100/0x11d
[23114.616932]  [<ffffffff81298603>] ? __this_cpu_preempt_check+0x13/0x15
[23114.616932]  [<ffffffff812a1805>] ? __percpu_counter_add+0x8e/0xa7
[23114.616932]  [<ffffffffa03bfd47>] btrfsic_submit_bio+0x1a/0x1d [btrfs]
[23114.616932]  [<ffffffffa0377db2>] btrfs_map_bio+0x1f4/0x26d [btrfs]
[23114.616932]  [<ffffffffa0348a33>] btree_submit_bio_hook+0x74/0xbf [btrfs]
[23114.616932]  [<ffffffffa03489bf>] ? btrfs_wq_submit_bio+0x160/0x160 [btrfs]
[23114.616932]  [<ffffffffa03697a9>] submit_one_bio+0x6b/0x89 [btrfs]
[23114.616932]  [<ffffffffa036f5be>] read_extent_buffer_pages+0x170/0x1ec [btrfs]
[23114.616932]  [<ffffffffa03471fa>] ? free_root_pointers+0x64/0x64 [btrfs]
[23114.616932]  [<ffffffffa0348adf>] readahead_tree_block+0x3f/0x4c [btrfs]
[23114.616932]  [<ffffffffa032e115>] read_block_for_search.isra.20+0x1ce/0x23d [btrfs]
[23114.616932]  [<ffffffffa032fab8>] btrfs_search_slot+0x65f/0x774 [btrfs]
[23114.616932]  [<ffffffffa036eff1>] ? free_extent_buffer+0x73/0x7e [btrfs]
[23114.616932]  [<ffffffffa0331ba4>] btrfs_next_old_leaf+0xa1/0x33c [btrfs]
[23114.616932]  [<ffffffffa0331e4f>] btrfs_next_leaf+0x10/0x12 [btrfs]
[23114.616932]  [<ffffffffa0336aa6>] caching_thread+0x22d/0x416 [btrfs]
[23114.616932]  [<ffffffffa037bce9>] btrfs_scrubparity_helper+0x187/0x3b6 [btrfs]
[23114.616932]  [<ffffffffa037c036>] btrfs_cache_helper+0xe/0x10 [btrfs]
[23114.616932]  [<ffffffff8106cf96>] process_one_work+0x273/0x4e4
[23114.616932]  [<ffffffff8106d6db>] worker_thread+0x1eb/0x2ca
[23114.616932]  [<ffffffff8106d4f0>] ? rescuer_thread+0x2b6/0x2b6
[23114.616932]  [<ffffffff81072a81>] kthread+0xd5/0xdd
[23114.616932]  [<ffffffff810729ac>] ? __kthread_unpark+0x5a/0x5a
[23114.616932]  [<ffffffff814c6257>] ret_from_fork+0x27/0x40
[23114.616932] Code: 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 89 f4 48 8b 46 70 a8 04 74 09 48 8b 5f 08 48 85 db 75 03 48 8b 1f 49 89 5c 24 68 <83> 7b
64 ff 74 04 f0 ff 43 58 49 83 7c 24 08 00 74 2c 4c 8d 6b
[23114.616932] RIP  [<ffffffffa037c1bf>] btrfs_queue_work+0x2c/0x190 [btrfs]
[23114.616932]  RSP <ffff88023f443d60>
[23114.689493] ---[ end trace 6e48b6bc707ca34b ]---
[23114.690166] Kernel panic - not syncing: Fatal exception in interrupt
[23114.691283] Kernel Offset: disabled
[23114.691918] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

The following diagram shows the sequence of operations that lead to the
use-after-free problem from the above trace:

        CPU 1                               CPU 2                                     CPU 3

                                       caching_thread()
 close_ctree()
   btrfs_stop_all_workers()
     btrfs_destroy_workqueue(
      fs_info->endio_meta_workers)

                                         btrfs_search_slot()
                                          read_block_for_search()
                                           readahead_tree_block()
                                            read_extent_buffer_pages()
                                             submit_one_bio()
                                              btree_submit_bio_hook()
                                               btrfs_bio_wq_end_io()
                                                --> sets the bio's
                                                    bi_end_io callback
                                                    to end_workqueue_bio()
                                               --> bio is submitted
                                                                                  bio completes
                                                                                  and its bi_end_io callback
                                                                                  is invoked
                                                                                   --> end_workqueue_bio()
                                                                                       --> attempts to queue
                                                                                           a task on fs_info->endio_meta_workers

     btrfs_destroy_workqueue(
      fs_info->caching_workers)

So fix this by destroying the queues used for metadata I/O tasks only
after destroying all the other queues.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-02-24 00:38:56 +00:00
Filipe Manana 5cdd7db6c5 Btrfs: fix assertion failure when freeing block groups at close_ctree()
At close_ctree() we free the block groups and then only after we wait for
any running worker kthreads to finish and shutdown the workqueues. This
behaviour is racy and it triggers an assertion failure when freeing block
groups because while we are doing it we can have for example a block group
caching kthread running, and in that case the block group's reference
count can still be greater than 1 by the time we assert its reference count
is 1, leading to an assertion failure:

[19041.198004] assertion failed: atomic_read(&block_group->count) == 1, file: fs/btrfs/extent-tree.c, line: 9799
[19041.200584] ------------[ cut here ]------------
[19041.201692] kernel BUG at fs/btrfs/ctree.h:3418!
[19041.202830] invalid opcode: 0000 [#1] PREEMPT SMP
[19041.203929] Modules linked in: btrfs xor raid6_pq dm_flakey dm_mod crc32c_generic ppdev sg psmouse acpi_cpufreq pcspkr parport_pc evdev tpm_tis parport tpm_tis_core i2c_piix4 i2c_core tpm serio_raw processor button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[19041.208082] CPU: 6 PID: 29051 Comm: umount Not tainted 4.9.0-rc7-btrfs-next-36+ #1
[19041.208082] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[19041.208082] task: ffff88015f028980 task.stack: ffffc9000ad34000
[19041.208082] RIP: 0010:[<ffffffffa03e319e>]  [<ffffffffa03e319e>] assfail.constprop.41+0x1c/0x1e [btrfs]
[19041.208082] RSP: 0018:ffffc9000ad37d60  EFLAGS: 00010286
[19041.208082] RAX: 0000000000000061 RBX: ffff88015ecb4000 RCX: 0000000000000001
[19041.208082] RDX: ffff88023f392fb8 RSI: ffffffff817ef7ba RDI: 00000000ffffffff
[19041.208082] RBP: ffffc9000ad37d60 R08: 0000000000000001 R09: 0000000000000000
[19041.208082] R10: ffffc9000ad37cb0 R11: ffffffff82f2b66d R12: ffff88023431d170
[19041.208082] R13: ffff88015ecb40c0 R14: ffff88023431d000 R15: ffff88015ecb4100
[19041.208082] FS:  00007f44f3d42840(0000) GS:ffff88023f380000(0000) knlGS:0000000000000000
[19041.208082] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[19041.208082] CR2: 00007f65d623b000 CR3: 00000002166f2000 CR4: 00000000000006e0
[19041.208082] Stack:
[19041.208082]  ffffc9000ad37d98 ffffffffa035989f ffff88015ecb4000 ffff88015ecb5630
[19041.208082]  ffff88014f6be000 0000000000000000 00007ffcf0ba6a10 ffffc9000ad37df8
[19041.208082]  ffffffffa0368cd4 ffff88014e9658e0 ffffc9000ad37e08 ffffffff811a634d
[19041.208082] Call Trace:
[19041.208082]  [<ffffffffa035989f>] btrfs_free_block_groups+0x17f/0x392 [btrfs]
[19041.208082]  [<ffffffffa0368cd4>] close_ctree+0x1c5/0x2e1 [btrfs]
[19041.208082]  [<ffffffff811a634d>] ? evict_inodes+0x132/0x141
[19041.208082]  [<ffffffffa034356d>] btrfs_put_super+0x15/0x17 [btrfs]
[19041.208082]  [<ffffffff8118fc32>] generic_shutdown_super+0x6a/0xeb
[19041.208082]  [<ffffffff8119004f>] kill_anon_super+0x12/0x1c
[19041.208082]  [<ffffffffa0343370>] btrfs_kill_super+0x16/0x21 [btrfs]
[19041.208082]  [<ffffffff8118fad1>] deactivate_locked_super+0x3b/0x68
[19041.208082]  [<ffffffff8118fb34>] deactivate_super+0x36/0x39
[19041.208082]  [<ffffffff811a9946>] cleanup_mnt+0x58/0x76
[19041.208082]  [<ffffffff811a99a2>] __cleanup_mnt+0x12/0x14
[19041.208082]  [<ffffffff81071573>] task_work_run+0x6f/0x95
[19041.208082]  [<ffffffff81001897>] prepare_exit_to_usermode+0xa3/0xc1
[19041.208082]  [<ffffffff81001a23>] syscall_return_slowpath+0x16e/0x1d2
[19041.208082]  [<ffffffff814c607d>] entry_SYSCALL_64_fastpath+0xab/0xad
[19041.208082] Code: c7 ae a0 3e a0 48 89 e5 e8 4e 74 d4 e0 0f 0b 55 89 f1 48 c7 c2 0b a4 3e a0 48 89 fe 48 c7 c7 a4 a6 3e a0 48 89 e5 e8 30 74 d4 e0 <0f> 0b 55 31 d2 48 89 e5 e8 d5 b9 f7 ff 5d c3 48 63 f6 55 31 c9
[19041.208082] RIP  [<ffffffffa03e319e>] assfail.constprop.41+0x1c/0x1e [btrfs]
[19041.208082]  RSP <ffffc9000ad37d60>
[19041.279264] ---[ end trace 23330586f16f064d ]---

This started happening as of kernel 4.8, since commit f3bca8028b
("Btrfs: add ASSERT for block group's memory leak") introduced these
assertions.

So fix this by freeing the block groups only after waiting for all
worker kthreads to complete and shutdown the workqueues.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-02-24 00:38:27 +00:00
Filipe Manana 3168021cf9 Btrfs: do not create explicit holes when replaying log tree if NO_HOLES enabled
We log holes explicitly by using file extent items, however when replaying
a log tree, if a logged file extent item corresponds to a hole and the
NO_HOLES feature is enabled we do not need to copy the file extent item
into the fs/subvolume tree, as the absence of such file extent items is
the purpose of the NO_HOLES feature. So skip the copying of file extent
items representing holes when the NO_HOLES feature is enabled.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-02-24 00:38:10 +00:00
Robbie Ko 91e1f56a8b Btrfs: fix leak of subvolume writers counter
When falling back from a nocow write to a regular cow write, we were
leaking the subvolume writers counter in 2 situations, preventing
snapshot creation from ever completing in the future, as it waits
for that counter to go down to zero before the snapshot creation
starts.

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Improved changelog and subject]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-02-24 00:38:01 +00:00
Filipe Manana 6f546216e9 Btrfs: bulk delete checksum items in the same leaf
Very often we have the checksums for an extent spread in multiple items
in the checksums tree, and currently the algorithm to delete them starts
by looking for them one by one and then deleting them one by one, which
is not optimal since each deletion involves shifting all the other items
in the leaf and when the leaf reaches some low threshold, to move items
off the leaf into its left and right neighbor leafs. Also, after each
item deletion we release our search path and start a new search for other
checksums items.

So optimize this by deleting in bulk all the items in the same leaf that
contain checksums for the extent being freed.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
2017-02-24 00:36:55 +00:00
Robbie Ko 0191410158 Btrfs: incremental send, do not issue invalid rmdir operations
When both the parent and send snapshots have a directory inode with the
same number but different generations (therefore they are different
inodes) and both have an entry with the same name, an incremental send
stream will contain an invalid rmdir operation that refers to the
orphanized name of the inode from the parent snapshot.

The following example scenario shows how this happens.

Parent snapshot:

 .
 |---- d259_old/               (ino 259, gen 9)
 |         |---- d1/           (ino 258, gen 9)
 |
 |---- f                       (ino 257, gen 9)

Send snapshot:

 .
 |---- d258/                   (ino 258, gen 7)
 |---- d259/                   (ino 259, gen 7)
         |---- d1/             (ino 257, gen 7)

When the kernel is processing inode 258 it notices that in both snapshots
there is an inode numbered 259 that is a parent of an inode 258. However
it ignores the fact that the inodes numbered 259 have different generations
in both snapshots, which means they are effectively different inodes.
Then it checks that both inodes 259 have a dentry named "d1" and because
of that it issues a rmdir operation with orphanized name of the inode 258
from the parent snapshot. This happens at send.c:process_record_refs(),
which calls send.c:did_overwrite_first_ref() that returns true and because
of that later on at process_recorded_refs() such rmdir operation is issued
because the inode being currently processed (258) is a directory and it
was deleted in the send snapshot (and replaced with another inode that has
the same number and is a directory too).
Fix this issue by comparing the generations of parent directory inodes
that have the same number and make send.c:did_overwrite_first_ref() when
the generations are different.

The following steps reproduce the problem.

 $ mkfs.btrfs -f /dev/sdb
 $ mount /dev/sdb /mnt
 $ touch /mnt/f
 $ mkdir /mnt/d1
 $ mkdir /mnt/d259_old
 $ mv /mnt/d1 /mnt/d259_old/d1
 $ btrfs subvolume snapshot -r /mnt /mnt/snap1
 $ btrfs send /mnt/snap1 -f /tmp/1.snap
 $ umount /mnt

 $ mkfs.btrfs -f /dev/sdc
 $ mount /dev/sdc /mnt
 $ mkdir /mnt/d1
 $ mkdir /mnt/dir258
 $ mkdir /mnt/dir259
 $ mv /mnt/d1 /mnt/dir259/d1
 $ btrfs subvolume snapshot -r /mnt /mnt/snap2
 $ btrfs receive /mnt/ -f /tmp/1.snap
 # Take note that once the filesystem is created, its current
 # generation has value 7 so the inodes from the second snapshot all have
 # a generation value of 7. And after receiving the first snapshot
 # the filesystem is at a generation value of 10, because the call to
 # create the second snapshot bumps the generation to 8 (the snapshot
 # creation ioctl does a transaction commit), the receive command calls
 # the snapshot creation ioctl to create the first snapshot, which bumps
 # the filesystem's generation to 9, and finally when the receive
 # operation finishes it calls an ioctl to transition the first snapshot
 # (snap1) from RW mode to RO mode, which does another transaction commit
 # and bumps the filesystem's generation to 10. This means all the inodes
 # in the first snapshot (snap1) have a generation value of 9.
 $ rm -f /tmp/1.snap
 $ btrfs send /mnt/snap1 -f /tmp/1.snap
 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
 $ umount /mnt

 $ mkfs.btrfs -f /dev/sdd
 $ mount /dev/sdd /mnt
 $ btrfs receive /mnt -f /tmp/1.snap
 $ btrfs receive -vv /mnt -f /tmp/2.snap
 receiving snapshot mysnap2 uuid=9c03962f-f620-0047-9f98-32e5a87116d9, ctransid=7 parent_uuid=d17a6e3f-14e5-df4f-be39-a7951a5399aa, parent_ctransid=9
 utimes
 unlink f
 mkdir o257-7-0
 mkdir o259-7-0
 rename o257-7-0 -> o259-7-0/d1
 chown o259-7-0/d1 - uid=0, gid=0
 chmod o259-7-0/d1 - mode=0755
 utimes o259-7-0/d1
 rmdir o258-9-0
 ERROR: rmdir o258-9-0 failed: No such file or directory

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-02-24 00:36:45 +00:00
Filipe Manana fe9c798dbf Btrfs: incremental send, do not delay rename when parent inode is new
When we are checking if we need to delay the rename operation for an
inode we not checking if a parent inode that exists in the send and
parent snapshots is really the same inode or not, that is, we are not
comparing the generation number of the parent inode in the send and
parent snapshots. Not only this results in unnecessarily delaying a
rename operation but also can later on make us generate an incorrect
name for a new inode in the send snapshot that has the same number
as another inode in the parent snapshot but a different generation.

Here follows an example where this happens.

Parent snapshot:

 .                                                  (ino 256, gen 3)
 |--- dir258/                                       (ino 258, gen 7)
 |       |--- dir257/                               (ino 257, gen 7)
 |
 |--- dir259/                                       (ino 259, gen 7)

Send snapshot:

 .                                                  (ino 256, gen 3)
 |--- file258                                       (ino 258, gen 10)
 |
 |--- new_dir259/                                   (ino 259, gen 10)
          |--- dir257/                              (ino 257, gen 7)

The following steps happen when computing the incremental send stream:

1) When processing inode 257, its new parent is created using its orphan
   name (o257-21-0), and the rename operation for inode 257 is delayed
   because its new parent (inode 259) was not yet processed - this
   decision to delay the rename operation does not make much sense
   because the inode 259 in the send snapshot is a new inode, it's not
   the same as inode 259 in the parent snapshot.

2) When processing inode 258 we end up delaying its rmdir operation,
   because inode 257 was not yet renamed (moved away from the directory
   inode 258 represents). We also create the new inode 258 using its
   orphan name "o258-10-0", then rename it to its final name of "file258"
   and then issue a truncate operation for it. However this truncate
   operation contains an incorrect name, which corresponds to the orphan
   name and not to the final name, which makes the receiver fail. This
   happens because when we attempt to compute the inode's current name
   we verify that there's another inode with the same number (258) that
   has its rmdir operation pending and because of that we generate an
   orphan name for the new inode 258 (we do this in the function
   get_cur_path()).

Fix this by not delayed the rename operation of an inode if it has parents
with the same number but different generations in both snapshots.

The following steps reproduce this example scenario.

 $ mkfs.btrfs -f /dev/sdb
 $ mount /dev/sdb /mnt
 $ mkdir /mnt/dir257
 $ mkdir /mnt/dir258
 $ mkdir /mnt/dir259
 $ mv /mnt/dir257 /mnt/dir258/dir257
 $ btrfs subvolume snapshot -r /mnt /mnt/snap1

 $ mv /mnt/dir258/dir257 /mnt/dir257
 $ rmdir /mnt/dir258
 $ rmdir /mnt/dir259

 # Remount the filesystem so that the next created inodes will have the
 # numbers 258 and 259. This is because when a filesystem is mounted,
 # btrfs sets the subvolume's inode counter to a value corresponding to
 # the highest inode number in the subvolume plus 1. This inode counter
 # is used to assign a unique number to each new inode and it's
 # incremented by 1 after very inode creation.
 # Note: we unmount and then mount instead of doing a mount with
 # "-o remount" because otherwise the inode counter remains at value 260.
 $ umount /mnt
 $ mount /dev/sdb /mnt
 $ touch /mnt/file258
 $ mkdir /mnt/new_dir259
 $ mv /mnt/dir257 /mnt/new_dir259/dir257
 $ btrfs subvolume snapshot -r /mnt /mnt/snap2

 $ btrfs send /mnt/snap1 -f /tmp/1.snap
 $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap

 $ umount /mnt
 $ mkfs.btrfs -f /dev/sdc
 $ mount /dev/sdc /mnt
 $ btrfs receive /mnt -f /tmo/1.snap
 $ btrfs receive /mnt -f /tmo/2.snap -vv
 receiving snapshot mysnap2 uuid=e059b6d1-7f55-f140-8d7c-9a3039d23c97, ctransid=10 parent_uuid=77e98cb6-8762-814f-9e05-e8ba877fc0b0, parent_ctransid=7
 utimes
 mkdir o259-10-0
 rename dir258 -> o258-7-0
 utimes
 mkfile o258-10-0
 rename o258-10-0 -> file258
 utimes
 truncate o258-10-0 size=0
 ERROR: truncate o258-10-0 failed: No such file or directory

Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-02-24 00:36:33 +00:00
Robbie Ko 4dd9920d99 Btrfs: send, fix failure to rename top level inode due to name collision
Under certain situations, an incremental send operation can fail due to a
premature attempt to create a new top level inode (a direct child of the
subvolume/snapshot root) whose name collides with another inode that was
removed from the send snapshot.

Consider the following example scenario.

Parent snapshot:

  .                 (ino 256, gen 8)
  |---- a1/         (ino 257, gen 9)
  |---- a2/         (ino 258, gen 9)

Send snapshot:

  .                 (ino 256, gen 3)
  |---- a2/         (ino 257, gen 7)

In this scenario, when receiving the incremental send stream, the btrfs
receive command fails like this (ran in verbose mode, -vv argument):

  rmdir a1
  mkfile o257-7-0
  rename o257-7-0 -> a2
  ERROR: rename o257-7-0 -> a2 failed: Is a directory

What happens when computing the incremental send stream is:

1) An operation to remove the directory with inode number 257 and
   generation 9 is issued.

2) An operation to create the inode with number 257 and generation 7 is
   issued. This creates the inode with an orphanized name of "o257-7-0".

3) An operation rename the new inode 257 to its final name, "a2", is
   issued. This is incorrect because inode 258, which has the same name
   and it's a child of the same parent (root inode 256), was not yet
   processed and therefore no rmdir operation for it was yet issued.
   The rename operation is issued because we fail to detect that the
   name of the new inode 257 collides with inode 258, because their
   parent, a subvolume/snapshot root (inode 256) has a different
   generation in both snapshots.

So fix this by ignoring the generation value of a parent directory that
matches a root inode (number 256) when we are checking if the name of the
inode currently being processed collides with the name of some other
inode that was not yet processed.

We can achieve this scenario of different inodes with the same number but
different generation values either by mounting a filesystem with the inode
cache option (-o inode_cache) or by creating and sending snapshots across
different filesystems, like in the following example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir /mnt/a1
  $ mkdir /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap1
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ touch /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap2
  $ btrfs receive /mnt -f /tmp/1.snap
  # Take note that once the filesystem is created, its current
  # generation has value 7 so the inode from the second snapshot has
  # a generation value of 7. And after receiving the first snapshot
  # the filesystem is at a generation value of 10, because the call to
  # create the second snapshot bumps the generation to 8 (the snapshot
  # creation ioctl does a transaction commit), the receive command calls
  # the snapshot creation ioctl to create the first snapshot, which bumps
  # the filesystem's generation to 9, and finally when the receive
  # operation finishes it calls an ioctl to transition the first snapshot
  # (snap1) from RW mode to RO mode, which does another transaction commit
  # and bumps the filesystem's generation to 10.
  $ rm -f /tmp/1.snap
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdd /mnt
  $ btrfs receive /mnt /tmp/1.snap
  # Receive of snapshot snap2 used to fail.
  $ btrfs receive /mnt /tmp/2.snap

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2017-02-24 00:36:01 +00:00
Liu Bo 6288d6eabc Btrfs: use the correct type when creating cow dio extent
'BTRFS_ORDERED_REGULAR' was introduced for the cow case in patch
'Btrfs: specify a new ordered extent type for create_io_em',
but it missed the directIO cow case.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2017-02-22 15:55:03 -08:00
Filipe Manana b1517622f2 Btrfs: fix deadlock between dedup on same file and starting writeback
If we are deduping two ranges of the same file we need to make sure that
we lock all pages in ascending order, that is, lock first the pages from
the range with lower offset and then the pages from the other range, as
otherwise we can deadlock with a concurrent task that is starting delalloc
(writeback). Example trace:

[74073.052218] INFO: task kworker/u32:10:17997 blocked for more than 120 seconds.
[74073.053889]       Tainted: G        W       4.9.0-rc7-btrfs-next-36+ #1
[74073.055071] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[74073.056696] kworker/u32:10  D    0 17997      2 0x00000000
[74073.058606] Workqueue: writeback wb_workfn (flush-btrfs-53176)
[74073.061370]  ffff880031e79858 ffff8802159d2580 ffff880237004580 ffff880031e79240
[74073.064784]  ffff88023f4978c0 ffffc9000817b638 ffffffff814c15e1 0000000000000000
[74073.068386]  ffff88023f4978d8 ffff88023f4978c0 000000000017b620 ffff880031e79240
[74073.071712] Call Trace:
[74073.072884]  [<ffffffff814c15e1>] ? __schedule+0x48f/0x6f4
[74073.075395]  [<ffffffff814c1c8b>] ? bit_wait+0x2f/0x2f
[74073.077511]  [<ffffffff814c18d2>] schedule+0x8c/0xa0
[74073.079440]  [<ffffffff814c4b36>] schedule_timeout+0x43/0xff
[74073.081637]  [<ffffffff8110953e>] ? time_hardirqs_on+0x9/0x14
[74073.083809]  [<ffffffff81095c67>] ? trace_hardirqs_on_caller+0x16/0x197
[74073.086314]  [<ffffffff810bde98>] ? timekeeping_get_ns+0x1e/0x32
[74073.100654]  [<ffffffff810be048>] ? ktime_get+0x41/0x52
[74073.102619]  [<ffffffff814c10f0>] io_schedule_timeout+0xa0/0x102
[74073.104771]  [<ffffffff814c10f0>] ? io_schedule_timeout+0xa0/0x102
[74073.106969]  [<ffffffff814c1ca6>] bit_wait_io+0x1b/0x39
[74073.108954]  [<ffffffff814c1fb8>] __wait_on_bit_lock+0x4f/0x99
[74073.110981]  [<ffffffff8112b692>] __lock_page+0x6b/0x6d
[74073.112833]  [<ffffffff8108ceb4>] ? autoremove_wake_function+0x3a/0x3a
[74073.115010]  [<ffffffffa031178b>] lock_page+0x2f/0x32 [btrfs]
[74073.116999]  [<ffffffffa0311d9f>] lock_delalloc_pages+0xc7/0x1a0 [btrfs]
[74073.119243]  [<ffffffffa0313d15>] find_lock_delalloc_range+0xc3/0x1a4 [btrfs]
[74073.121636]  [<ffffffffa0313e81>] writepage_delalloc.isra.31+0x8b/0x134 [btrfs]
[74073.124229]  [<ffffffffa0315d69>] __extent_writepage+0x1c1/0x2bf [btrfs]
[74073.126372]  [<ffffffffa03160f2>] extent_write_cache_pages.isra.30.constprop.49+0x28b/0x36c [btrfs]
[74073.129371]  [<ffffffffa03165b9>] extent_writepages+0x4b/0x5c [btrfs]
[74073.131440]  [<ffffffffa02fcb59>] ? insert_reserved_file_extent.constprop.42+0x261/0x261 [btrfs]
[74073.134303]  [<ffffffff811b4ce4>] ? writeback_sb_inodes+0xe0/0x4a1
[74073.136298]  [<ffffffffa02fab7f>] btrfs_writepages+0x28/0x2a [btrfs]
[74073.138248]  [<ffffffff81138200>] do_writepages+0x23/0x2c
[74073.139910]  [<ffffffff811b3cab>] __writeback_single_inode+0x105/0x6d2
[74073.142003]  [<ffffffff811b4e96>] writeback_sb_inodes+0x292/0x4a1
[74073.136298]  [<ffffffffa02fab7f>] btrfs_writepages+0x28/0x2a [btrfs]
[74073.138248]  [<ffffffff81138200>] do_writepages+0x23/0x2c
[74073.139910]  [<ffffffff811b3cab>] __writeback_single_inode+0x105/0x6d2
[74073.142003]  [<ffffffff811b4e96>] writeback_sb_inodes+0x292/0x4a1
[74073.143911]  [<ffffffff811b511b>] __writeback_inodes_wb+0x76/0xae
[74073.145787]  [<ffffffff811b53ca>] wb_writeback+0x1cc/0x4d7
[74073.147452]  [<ffffffff811b60cd>] wb_workfn+0x194/0x37d
[74073.149084]  [<ffffffff811b60cd>] ? wb_workfn+0x194/0x37d
[74073.150726]  [<ffffffff8106ce77>] ? process_one_work+0x154/0x4e4
[74073.152694]  [<ffffffff8106cf96>] process_one_work+0x273/0x4e4
[74073.154452]  [<ffffffff8106d6db>] worker_thread+0x1eb/0x2ca
[74073.156138]  [<ffffffff8106d4f0>] ? rescuer_thread+0x2b6/0x2b6
[74073.157837]  [<ffffffff81072a81>] kthread+0xd5/0xdd
[74073.159339]  [<ffffffff810729ac>] ? __kthread_unpark+0x5a/0x5a
[74073.161088]  [<ffffffff814c6257>] ret_from_fork+0x27/0x40
[74073.162680] INFO: lockdep is turned off.
[74073.163855] INFO: task do-dedup:30264 blocked for more than 120 seconds.
[74073.181180]       Tainted: G        W       4.9.0-rc7-btrfs-next-36+ #1
[74073.181180] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[74073.185296] fdm-stress      D    0 30264  29974 0x00000000
[74073.186810]  ffff880089595118 ffff880211b8eac0 ffff880237030380 ffff880089594b00
[74073.188998]  ffff88023f2978c0 ffffc900063abb68 ffffffff814c15e1 0000000000000000
[74073.191070]  ffff88023f2978d8 ffff88023f2978c0 00000000003abb50 ffff880089594b00
[74073.193286] Call Trace:
[74073.193990]  [<ffffffff814c15e1>] ? __schedule+0x48f/0x6f4
[74073.195418]  [<ffffffff814c1c8b>] ? bit_wait+0x2f/0x2f
[74073.196796]  [<ffffffff814c18d2>] schedule+0x8c/0xa0
[74073.198163]  [<ffffffff814c4b36>] schedule_timeout+0x43/0xff
[74073.199621]  [<ffffffff81095df5>] ? trace_hardirqs_on+0xd/0xf
[74073.201100]  [<ffffffff810bde98>] ? timekeeping_get_ns+0x1e/0x32
[74073.202686]  [<ffffffff810be048>] ? ktime_get+0x41/0x52
[74073.204051]  [<ffffffff814c10f0>] io_schedule_timeout+0xa0/0x102
[74073.205585]  [<ffffffff814c10f0>] ? io_schedule_timeout+0xa0/0x102
[74073.207123]  [<ffffffff814c1ca6>] bit_wait_io+0x1b/0x39
[74073.208238]  [<ffffffff814c1fb8>] __wait_on_bit_lock+0x4f/0x99
[74073.208871]  [<ffffffff8112b692>] __lock_page+0x6b/0x6d
[74073.209430]  [<ffffffff8108ceb4>] ? autoremove_wake_function+0x3a/0x3a
[74073.210101]  [<ffffffff8112b800>] lock_page+0x2f/0x32
[74073.210636]  [<ffffffff8112c502>] pagecache_get_page+0x5e/0x153
[74073.211270]  [<ffffffffa03257eb>] gather_extent_pages+0x4e/0x109 [btrfs]
[74073.212166]  [<ffffffffa032a04c>] btrfs_dedupe_file_range+0x1e1/0x4dd [btrfs]
[74073.213257]  [<ffffffff8118d9b5>] vfs_dedupe_file_range+0x1c1/0x221
[74073.214086]  [<ffffffff8119e0c4>] do_vfs_ioctl+0x442/0x600
[74073.214767]  [<ffffffff811a7874>] ? rcu_read_unlock+0x5b/0x5d
[74073.215619]  [<ffffffff811a7953>] ? __fget+0x6b/0x77
[74073.216338]  [<ffffffff8119e2d9>] SyS_ioctl+0x57/0x79
[74073.217149]  [<ffffffff814c5fea>] entry_SYSCALL_64_fastpath+0x18/0xad
[74073.218102]  [<ffffffff81109552>] ? time_hardirqs_off+0x9/0x14
[74073.218968]  [<ffffffff810938ce>] ? trace_hardirqs_off_caller+0x1f/0xaa
[74073.219938] INFO: lockdep is turned off.

What happened was the following:

      CPU 1                                       CPU 2

                                             btrfs_dedupe_file_range()
                                               --> using same inode as source
                                                   and target
                                               --> src range is [768K, 1Mb[
                                               --> dst range is [0, 256K[
                                              btrfs_cmp_data_prepare()
                                               --> calls gather_extent_pages()
                                                   for range [768K, 1Mb[ and
                                                   locks all pages in that range

 do_writepages()
  btrfs_writepages()
   extent_writepages()
    extent_write_cache_pages()
     __extent_writepage()
      writepage_delalloc()
       find_lock_delalloc_range()
         --> finds range [0, 1Mb[
         lock_delalloc_pages()
          --> locks all pages in the
              range [0, 768K[
          --> tries to lock page at
              offset 768K
                --> deadlock

                                               --> calls gather_extent_pages()
                                                   to lock pages in the range
                                                   [0, 256K[
                                                    --> deadlock, task at CPU 1
                                                        already locked that
                                                        range and it's trying
                                                        to lock the range we
                                                        locked previously

So fix this by making sure that during a dedup we always lock first the
pages from the range with lower offset.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2017-02-22 15:55:02 -08:00
Jens Axboe 818551e2b2 Merge branch 'for-4.11/next' into for-4.11/linus-merge
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-17 14:08:19 -07:00
Jeff Mahoney 71367b3fa7 btrfs: use btrfs_debug instead of pr_debug in transaction abort
Commit e5d6b12fe1 (Btrfs: don't WARN() in btrfs_transaction_abort() for
IO errors) added a pr_debug call to be printed when a transaction is
aborted with -EIO instead of WARN.  btrfs_debug prints which file system
the message is associated with so let's use that instead.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:56 +01:00
Jeff Mahoney 21e75ffe3c btrfs: btrfs_truncate_free_space_cache always allocates path
btrfs_truncate_free_space_cache always allocates a btrfs_path structure
but only uses it when the caller passes a block group.  Let's move the
allocation and free into the conditional.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:56 +01:00
Jeff Mahoney 77ab86bf1c btrfs: free-space-cache, clean up unnecessary root arguments
The free space cache APIs accept a root but always use the tree root.

Also, btrfs_truncate_free_space_cache accepts a root AND an inode but
the inode always points to the root anyway, so let's just pass the inode.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:56 +01:00
Jeff Mahoney 5e00f1939f btrfs: convert btrfs_inc_block_group_ro to accept fs_info
btrfs_inc_block_group_ro is either passed the extent root or the dev
root, but it doesn't do anything with the dev tree.  Let's convert
to passing an fs_info and using the extent root.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:56 +01:00
Jeff Mahoney 0c9ab349c2 btrfs: flush_space always takes fs_info->fs_root
We don't need to pass a root to flush_space since it always uses
the fs_root.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:55 +01:00
Jeff Mahoney 87bde3cdfc btrfs: pass fs_info to (more) routines that are only called with extent_root
Outside of interactions with qgroups, the roots passed in extent-tree.c
are usually passed to ensure that we don't do refcounts on log trees or
to get the allocation profile for an allocation request.  Otherwise, it
operates on the extent root.  This patch converts some more routines in
extent-tree.c that are always called with the extent root to accept
an fs_info instead.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:55 +01:00
Qu Wenruo fb235dc06f btrfs: qgroup: Move half of the qgroup accounting time out of commit trans
Just as Filipe pointed out, the most time consuming parts of qgroup are
btrfs_qgroup_account_extents() and
btrfs_qgroup_prepare_account_extents().
Which both call btrfs_find_all_roots() to get old_roots and new_roots
ulist.

What makes things worse is, we're calling that expensive
btrfs_find_all_roots() at transaction committing time with
TRANS_STATE_COMMIT_DOING, which will blocks all incoming transaction.

Such behavior is necessary for @new_roots search as current
btrfs_find_all_roots() can't do it correctly so we do call it just
before switch commit roots.

However for @old_roots search, it's not necessary as such search is
based on commit_root, so it will always be correct and we can move it
out of transaction committing.

This patch moves the @old_roots search part out of
commit_transaction(), so in theory we can half the time qgroup time
consumption at commit_transaction().

But please note that, this won't speedup qgroup overall, the total time
consumption is still the same, just reduce the performance stall.

Cc: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:55 +01:00
David Sterba 15b34517a6 btrfs: remove unused parameter from adjust_slots_upwards
Never used.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:55 +01:00
David Sterba 0e8d931a82 btrfs: remove unused parameters from __btrfs_write_out_cache
Both unused after the call to update_cache_item has been moved to
__btrfs_wait_cache_io.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:55 +01:00
David Sterba 7bf1a15912 btrfs: remove unused parameter from cleanup_write_cache_enospc
bitmap_list is unused since the io_ctl framework.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:55 +01:00
David Sterba d75eefdf96 btrfs: remove unused parameter from __add_inode_ref
Unused since the helper has been split, eb used in the caller.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:54 +01:00
David Sterba 4a0ab9d711 btrfs: remove unused parameter from clone_copy_inline_extent
Never used.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:54 +01:00
David Sterba 1a287cfea1 btrfs: remove unused parameters from btrfs_cmp_data
After the page locking has been reworked, we get all pages prepared via
cmp_pages.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:54 +01:00
David Sterba eeac44cb49 btrfs: remove unused parameter from __add_inline_refs
Never used.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:54 +01:00
David Sterba e5987e1319 btrfs: remove unused parameters from scrub_setup_wr_ctx
Never used.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:54 +01:00
David Sterba 61d7e4cb11 btrfs: remove unused parameter from create_snapshot
The name parameters have never been used, as the name is passed via the
dentry.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:54 +01:00
David Sterba e4a4dce72e btrfs: remove unused parameter from init_first_rw_device
The 'device' used to be added in that function, but now it's done by the
caller.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:54 +01:00
David Sterba 72b468c8da btrfs: remove unused parameter from __btrfs_alloc_chunk
We grab fs_info from other parameters.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:53 +01:00
David Sterba 56e033a787 btrfs: remove unused parameter from btrfs_fill_super
Never used for anything meaningful since we have our own superblock
filler.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:53 +01:00
David Sterba 4242b64a4c btrfs: remove unused parameter from extent_write_cache_pages
The 'tree' was used to call locking hook that does not exist anymore.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:53 +01:00
David Sterba df9f628e3d btrfs: remove unused parameter from add_pending_csums
Never used.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:53 +01:00
David Sterba 3d4b9496e8 btrfs: remove unused parameter from update_nr_written
The logic has been updated in "Btrfs: make mapping->writeback_index
point to the last written page" (a91326679f) and page is not
needed anymore.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:53 +01:00
David Sterba c2df8bb43f btrfs: remove unused parameter from submit_extent_page
This used to hold number of maximum pages to allocate, but this is now
limited by BIO_MAX_PAGES. The local are now unused and removed as well.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:53 +01:00
David Sterba f1e3026192 btrfs: remove unused parameter from tree_move_next_or_upnext
Not needed.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:52 +01:00
David Sterba ab6a43e122 btrfs: remove unused parameter from tree_move_down
Never needed.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2017-02-17 12:03:52 +01:00