When I wrote the first patch that added the rbtree support for message
queue insertion, it sped up the case where the queue was very full
drastically from the original code. It, however, slowed down the case
where the queue was empty (not drastically though).
This patch caches the last freed rbtree node struct so we can quickly
reuse it when we get a new message. This is the common path for any queue
that very frequently goes from 0 to 1 then back to 0 messages in queue.
Andrew Morton didn't like that we were doing a GFP_ATOMIC allocation in
msg_insert, so this patch attempts to speculatively allocate a new node
struct outside of the spin lock when we know we need it, but will still
fall back to a GFP_ATOMIC allocation if it has to.
Once I added the caching, the necessary various ret = ; spin_unlock
gyrations in mq_timedsend were getting pretty ugly, so this also slightly
refactors that function to streamline the flow of the code and the
function exit.
Finally, while working on getting performance back I made sure that all of
the node structs were always fully initialized when they were first used,
rendering the use of kzalloc unnecessary and a waste of CPU cycles.
The net result of all of this is:
1) We will avoid a GFP_ATOMIC allocation when possible, but fall back
on it when necessary.
2) We will speculatively allocate a node struct using GFP_KERNEL if our
cache is empty (and save the struct to our cache if it's still empty
after we have obtained the spin lock).
3) The performance of the common queue empty case has significantly
improved and is now much more in line with the older performance for
this case.
The performance changes are:
Old mqueue new mqueue new mqueue + caching
queue empty
send/recv 305/288ns 349/318ns 310/322ns
I don't think we'll ever be able to get the recv performance back, but
that's because the old recv performance was a direct result and
consequence of the old methods abysmal send performance. The recv path
simply must do more so that the send path does not incur such a penalty
under higher queue depths.
As it turns out, the new caching code also sped up the various queue full
cases relative to my last patch. That could be because of the difference
between the syscall path in 3.3.4-rc5 and 3.3.4-rc6, or because of the
change in code flow in the mq_timedsend routine. Regardless, I'll take
it. It wasn't huge, and I *would* say it was within the margin for error,
but after many repeated runs what I'm seeing is that the old numbers trend
slightly higher (about 10 to 20ns depending on which test is the one
running).
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We already check the mq attr struct if it's passed in, but now that the
admin can set system wide defaults separate from maximums, it's actually
possible to set the defaults to something that would overflow. So, if
there is no attr struct passed in to the open call, check the default
values.
While we are at it, simplify mq_attr_ok() by making it return 0 or an
error condition, so that way if we add more tests to it later, we have the
option of what error should be returned instead of the calling location
having to pick a possibly inaccurate error code.
[akpm@linux-foundation.org: s/ENOMEM/EOVERFLOW/]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While working on the other parts of the mqueue stuff, I noticed that the
calculation for overflow in mq_attr_ok didn't actually match reality (this
is especially true since my last patch which changed how we account memory
slightly).
In particular, we used to test for overflow using:
msgs * msgsize + msgs * sizeof(struct msg_msg *)
That was never really correct because each message we allocate via
load_msg() is actually a struct msg_msg followed by the data for the
message (and if struct msg_msg + data exceeds PAGE_SIZE we end up
allocating struct msg_msgseg structs too, but accounting for them would
get really tedious, so let's ignore those...they're only a pointer in size
anyway). This patch updates the calculation to be more accurate in
regards to maximum possible memory consumption by the mqueue.
[akpm@linux-foundation.org: add a local to simplify overflow-checking expression]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The existing implementation of the POSIX message queue send and recv
functions is, well, abysmal. Even worse than abysmal. I submitted a
patch to increase the maximum POSIX message queue limit to 65536 due to
customer needs, however, upon looking over the send/recv implementation, I
realized that my customer needs help with that too even if they don't know
it. The basic problem is that, given the fairly typical use case scenario
for a large queue of queueing lots of messages all at the same priority (I
verified with my customer that this is indeed what their app does), the
msg_insert routine is basically a frikkin' bubble sort. I mean, whoa,
that's *so* middle school.
OK, OK, to not slam the original author too much, I'm sure they didn't
envision a queue depth of 50,000+ messages. No one would think that
moving elements in an array, one at a time, and dereferencing each pointer
in that array to check priority of the message being pointed too, again
one at a time, for 50,000+ times would be good. So let's assume that, as
is typical, the users have found a way to break our code simply by using
it in a way we didn't envision. Fair enough.
"So, just how broken is it?", you ask. I wondered the same thing, so I
wrote an app to let me know. It's my next patch. It gave me some
interesting results. Here's what it tested:
Interference with other apps - In continuous mode, the app just sits there
and hits a message queue forever, while you go do something productive on
another terminal using other CPUs. You then measure how long it takes you
to do that something productive. Then you restart the app in fake
continuous mode, and it sits in a tight loop on a CPU while you repeat
your tests. The whole point of this is to keep one CPU tied up (so it
can't be used in your other work) but in one case tied up hitting the
mqueue code so we can see the effect of walking that 65,528 element array
one pointer at a time on the global CPU cache. If it's bad, then it will
slow down your app on the other CPUs just by polluting cache mercilessly.
In the fake case, it will be in a tight loop, but not polluting cache.
Testing the mqueue subsystem directly - Here we just run a number of tests
to see how the mqueue subsystem performs under different conditions. A
couple conditions are known to be worst case for the old system, and some
routines, so this tests all of them.
So, on to the results already:
Subsystem/Test Old New
Time to compile linux
kernel (make -j12 on a
6 core CPU)
Running mqueue test user 49m10.744s user 45m26.294s
sys 5m51.924s sys 4m59.894s
total 55m02.668s total 50m26.188s
Running fake test user 45m32.686s user 45m18.552s
sys 5m12.465s sys 4m56.468s
total 50m45.151s total 50m15.020s
% slowdown from mqueue
cache thrashing ~8% ~.5%
Avg time to send/recv (in nanoseconds per message)
when queue empty 305/288 349/318
when queue full (65528 messages)
constant priority 526589/823 362/314
increasing priority 403105/916 495/445
decreasing priority 73420/594 482/409
random priority 280147/920 546/436
Time to fill/drain queue (65528 messages, in seconds)
constant priority 17.37/.12 .13/.12
increasing priority 4.14/.14 .21/.18
decreasing priority 12.93/.13 .21/.18
random priority 8.88/.16 .22/.17
So, I think the results speak for themselves. It's possible this
implementation could be improved by cacheing at least one priority level
in the node tree (that would bring the queue empty performance more in
line with the old implementation), but this works and is *so* much better
than what we had, especially for the common case of a single priority in
use, that further refinements can be in follow on patches.
[akpm@linux-foundation.org: fix typo in comment, remove stray semicolon]
[levinsasha928@gmail.com: use correct gfp flags in msg_insert]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b231cca438 ("message queues: increase range limits") changed
mqueue default value when attr parameter is specified NULL from hard
coded value to fs.mqueue.{msg,msgsize}_max sysctl value.
This made large side effect. When user need to use two mqueue
applications 1) using !NULL attr parameter and it require big message
size and 2) using NULL attr parameter and only need small size message,
app (1) require to raise fs.mqueue.msgsize_max and app (2) consume large
memory size even though it doesn't need.
Doug Ledford propsed to switch back it to static hard coded value.
However it also has a compatibility problem. Some applications might
started depend on the default value is tunable.
The solution is to separate default value from maximum value.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KMALLOC_MAX_SIZE is not a good threshold. It is extremely high and
problematic. Unfortunately, some silly drivers depend on this and we
can't change it. But any new code needn't use such extreme ugly high
order allocations. It brings us awful fragmentation issues and system
slowdown.
Signed-off-by: KOSAKI Motohiro <mkosaki@jp.fujitsu.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Acked-by: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b231cca438 ("message queues: increase range limits") changed the
maximum size of a message in a message queue from INT_MAX to 8192*128.
Unfortunately, we had customers that relied on a size much larger than
8192*128 on their production systems. After reviewing POSIX, we found
that it is silent on the maximum message size. We did find a couple other
areas in which it was not silent. Fix up the mqueue maximums so that the
customer's system can continue to work, and document both the POSIX and
real world requirements in ipc_namespace.h so that we don't have this
issue crop back up.
Also, commit 9cf18e1dd7 ("ipc: HARD_MSGMAX should be higher not lower
on 64bit") fiddled with HARD_MSGMAX without realizing that the number was
intentionally in place to limit the msg queue depth to one that was small
enough to kmalloc an array of pointers (hence why we divided 128k by
sizeof(long)). If we wish to meet POSIX requirements, we have no choice
but to change our allocation to a vmalloc instead (at least for the large
queue size case). With that, it's possible to increase our allowed
maximum to the POSIX requirements (or more if we choose).
[sfr@canb.auug.org.au: using vmalloc requires including vmalloc.h]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In two places we don't enforce the hard limits for CAP_SYS_RESOURCE apps.
In preparation for making more reasonable hard limits, start enforcing
them even on CAP_SYS_RESOURCE.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit b231cca438 ("message queues: increase range limits") changed
how we create a queue that does not include an attr struct passed to
open so that it creates the queue with whatever the maximum values are.
However, if the admin has set the maximums to allow flexibility in
creating a queue (aka, both a large size and large queue are allowed,
but combined they create a queue too large for the RLIMIT_MSGQUEUE of
the user), then attempts to create a queue without an attr struct will
fail. Switch back to using acceptable defaults regardless of what the
maximums are.
Note: so far, we only know of a few applications that rely on this
behavior (specifically, set the maximums in /proc, then run the
application which calls mq_open() without passing in an attr struct, and
the application expects the newly created message queue to have the
maximum sizes that were set in /proc used on the mq_open() call, and all
of those applications that we know of are actually part of regression
test suites that were coded to do something like this:
for size in 4096 65536 $((1024 * 1024)) $((16 * 1024 * 1024)); do
echo $size > /proc/sys/fs/mqueue/msgsize_max
mq_open || echo "Error opening mq with size $size"
done
These test suites that depend on any behavior like this are broken. The
concept that programs should rely upon the system wide maximum in order
to get their desired results instead of simply using a attr struct to
specify what they want is fundamentally unfriendly programming practice
for any multi-tasking OS.
Fixing this will break those few apps that we know of (and those app
authors recognize the brokenness of their code and the need to fix it).
However, the following patch "mqueue: separate mqueue default value"
allows a workaround in the form of new knobs for the default msg queue
creation parameters for any software out there that we don't already
know about that might rely on this behavior at the moment.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit b231cca438 ("message queues: increase range limits") on
Oct 18, 2008, calls to mq_open() that did not pass in an attribute
struct and expected to get default values for the size of the queue and
the max message size now get the system wide maximums instead of
hardwired defaults like they used to get.
This was uncovered when one of the earlier patches in this patch set
increased the default system wide maximums at the same time it increased
the hard ceiling on the system wide maximums (a customer specifically
needed the hard ceiling brought back up, the new ceiling that commit
b231cca438 introduced was too low for their production systems). By
increasing the default maximums and not realising they were tied to any
attempt to create a message queue without an attribute struct, I had
inadvertently made it such that all message queue creation attempts
without an attribute struct were failing because the new default
maximums would create a queue that exceeded the default rlimit for
message queue bytes.
As a result, the system wide defaults were brought back down to their
previous levels, and the system wide ceilings on the maximums were
raised to meet the customer's needs. However, the fact that the no
attribute struct behavior of mq_open() could be broken by changing the
system wide maximums for message queues was seen as fundamentally broken
itself. So we hardwired the no attribute case back like it used to be.
But, then we realized that on the very off chance that some piece of
software in the wild depended on that behavior, we could work around
that issue by adding two new knobs to /proc that allowed setting the
defaults for message queues created without an attr struct separately
from the system wide maximums.
What is not an option IMO is to leave the current behavior in place. No
piece of software should ever rely on setting the system wide maximums
in order to get a desired message queue. Such a reliance would be so
fundamentally multitasking OS unfriendly as to not really be tolerable.
Fortunately, we don't know of any software in the wild that uses this
except for a regression test program that caught the issue in the first
place. If there is though, we have made accommodations with the two new
/proc knobs (and that's all the accommodations such fundamentally broken
software can be allowed)..
This patch:
The various defines for minimums and maximums of the sysctl controllable
mqueue values are scattered amongst different files and named
inconsistently. Move them all into ipc_namespace.h and make them have
consistent names. Additionally, make the number of queues per namespace
also have a minimum and maximum and use the same sysctl function as the
other two settable variables.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Acked-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oLXf
-----END PGP SIGNATURE-----
Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
Pull writeback tree from Wu Fengguang:
"Mainly from Jan Kara to avoid iput() in the flusher threads."
* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Avoid iput() from flusher thread
vfs: Rename end_writeback() to clear_inode()
vfs: Move waiting for inode writeback from end_writeback() to evict_inode()
writeback: Refactor writeback_single_inode()
writeback: Remove wb->list_lock from writeback_single_inode()
writeback: Separate inode requeueing after writeback
writeback: Move I_DIRTY_PAGES handling
writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()
writeback: Move clearing of I_SYNC into inode_sync_complete()
writeback: initialize global_dirty_limit
fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds
mm: page-writeback.c: local functions should not be exposed globally
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
These function are no longer needed replace them with their more useful equivalents.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Stop relying on user->user_ns which is going away and instead capture
the user_namespace of the process we are supposed to notify.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Optimize performance and prepare for the removal of the user_ns reference
from user_struct. Remove the slow long walk through cred->user->user_ns and
instead go straight to cred->user_ns.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Pull arch/tile (really asm-generic) update from Chris Metcalf:
"These are a couple of asm-generic changes that apply to tile."
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
compat: use sys_sendfile64() implementation for sendfile syscall
[PATCH v3] ipc: provide generic compat versions of IPC syscalls
Merge first batch of patches from Andrew Morton:
"A few misc things and all the MM queue"
* emailed from Andrew Morton <akpm@linux-foundation.org>: (92 commits)
memcg: avoid THP split in task migration
thp: add HPAGE_PMD_* definitions for !CONFIG_TRANSPARENT_HUGEPAGE
memcg: clean up existing move charge code
mm/memcontrol.c: remove unnecessary 'break' in mem_cgroup_read()
mm/memcontrol.c: remove redundant BUG_ON() in mem_cgroup_usage_unregister_event()
mm/memcontrol.c: s/stealed/stolen/
memcg: fix performance of mem_cgroup_begin_update_page_stat()
memcg: remove PCG_FILE_MAPPED
memcg: use new logic for page stat accounting
memcg: remove PCG_MOVE_LOCK flag from page_cgroup
memcg: simplify move_account() check
memcg: remove EXPORT_SYMBOL(mem_cgroup_update_page_stat)
memcg: kill dead prev_priority stubs
memcg: remove PCG_CACHE page_cgroup flag
memcg: let css_get_next() rely upon rcu_read_lock()
cgroup: revert ss_id_lock to spinlock
idr: make idr_get_next() good for rcu_read_lock()
memcg: remove unnecessary thp check in page stat accounting
memcg: remove redundant returns
memcg: enum lru_list lru
...
When calling shmget() with SHM_HUGETLB, shmget aligns the request size to
PAGE_SIZE, but this is not sufficient.
Modify hugetlb_file_setup() to align requests to the huge page size, and
to accept an address argument so that all alignment checks can be
performed in hugetlb_file_setup(), rather than in its callers. Change
newseg() and mmap_pgoff() to match the new prototype and eliminate a now
redundant alignment check.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Steven Truelove <steven.truelove@utoronto.ca>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile 1 from Al Viro:
"This is _not_ all; in particular, Miklos' and Jan's stuff is not there
yet."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
ext4: initialization of ext4_li_mtx needs to be done earlier
debugfs-related mode_t whack-a-mole
hfsplus: add an ioctl to bless files
hfsplus: change finder_info to u32
hfsplus: initialise userflags
qnx4: new helper - try_extent()
qnx4: get rid of qnx4_bread/qnx4_getblk
take removal of PF_FORKNOEXEC to flush_old_exec()
trim includes in inode.c
um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
um: embed ->stub_pages[] into mmu_context
gadgetfs: list_for_each_safe() misuse
ocfs2: fix leaks on failure exits in module_init
ecryptfs: make register_filesystem() the last potential failure exit
ntfs: forgets to unregister sysctls on register_filesystem() failure
logfs: missing cleanup on register_filesystem() failure
jfs: mising cleanup on register_filesystem() failure
make configfs_pin_fs() return root dentry on success
configfs: configfs_create_dir() has parent dentry in dentry->d_parent
configfs: sanitize configfs_create()
...
When using the "compat" APIs, architectures will generally want to
be able to make direct syscalls to msgsnd(), shmctl(), etc., and
in the kernel we would want them to be handled directly by
compat_sys_xxx() functions, as is true for other compat syscalls.
However, for historical reasons, several of the existing compat IPC
syscalls do not do this. semctl() expects a pointer to the fourth
argument, instead of the fourth argument itself. msgsnd(), msgrcv()
and shmat() expect arguments in different order.
This change adds an ARCH_WANT_OLD_COMPAT_IPC config option that can be
set to preserve this behavior for ports that use it (x86, sparc, powerpc,
s390, and mips). No actual semantics are changed for those architectures,
and there is only a minimal amount of code refactoring in ipc/compat.c.
Newer architectures like tile (and perhaps future architectures such
as arm64 and unicore64) should not select this option, and thus can
avoid having any IPC-specific code at all in their architecture-specific
compat layer. In the same vein, if this option is not selected, IPC_64
mode is assumed, since that's what the <asm-generic> headers expect.
The workaround code in "tile" for msgsnd() and msgrcv() is removed
with this change; it also fixes the bug that shmat() and semctl() were
not being properly handled.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Commit cc39c6a9bb ("mm: account skipped entries to avoid looping in
find_get_pages") correctly fixed an infinite loop; but left a problem
that find_get_pages() on shmem would return 0 (appearing to callers to
mean end of tree) when it meets a run of nr_pages swap entries.
The only uses of find_get_pages() on shmem are via pagevec_lookup(),
called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's
scan_mapping_unevictable_pages(). The first is already commented, and
not worth worrying about; but the second can leave pages on the
Unevictable list after an unusual sequence of swapping and locking.
Fix that by using shmem_find_get_pages_and_swap() (then ignoring the
swap) instead of pagevec_lookup().
But I don't want to contaminate vmscan.c with shmem internals, nor
shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into
shmem.c, renaming it shmem_unlock_mapping(); and rename
check_move_unevictable_page() to check_move_unevictable_pages(), looping
down an array of pages, oftentimes under the same lock.
Leave out the "rotate unevictable list" block: that's a leftover from
when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed
handling involved looking at pages at tail of LRU.
Was there significance to the sequence first ClearPageUnevictable, then
test page_evictable, then SetPageUnevictable here? I think not, we're
under LRU lock, and have no barriers between those.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages
evictable again once the shared memory is unlocked. It does this with
pagevec_lookup()s across the whole object (which might occupy most of
memory), and takes 300ms to unlock 7GB here. A cond_resched() every
PAGEVEC_SIZE pages would be good.
However, KOSAKI-san points out that this is called under shmem.c's
info->lock, and it's also under shm.c's shm_lock(), both spinlocks.
There is no strong reason for that: we need to take these pages off the
unevictable list soonish, but those locks are not required for it.
So move the call to scan_mapping_unevictable_pages() from shmem.c's
unlock handling up to shm.c's unlock handling. Remove the recently
added barrier, not needed now we have spin_unlock() before the scan.
Use get_file(), with subsequent fput(), to make sure we have a reference
to mapping throughout scan_mapping_unevictable_pages(): that's something
that was previously guaranteed by the shm_lock().
Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK
time, and we lazily discover them to be Unevictable later, so it serves
no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since
pages still on pagevec are not marked Unevictable.
The original code avoided redundant rescans by checking VM_LOCKED flag
at its level: now avoid them by checking shp's SHM_LOCKED.
The original code called scan_mapping_unevictable_pages() on a locked
area at shm_destroy() time: perhaps we once had accounting cross-checks
which required that, but not now, so skip the overhead and just let
inode eviction deal with them.
Put check_move_unevictable_page() and scan_mapping_unevictable_pages()
under CONFIG_SHMEM (with stub for the TINY case when ramfs is used),
more as comment than to save space; comment them used for SHM_UNLOCK.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because the current task is being used to get the limit, we can simply
use rlimit() instead of task_rlimit().
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc/mqueue.c: for __SI_MESQ, convert the uid being sent to recipient's
user namespace. (new, thanks Oleg)
__send_signal: convert current's uid to the recipient's user namespace
for any siginfo which is not SI_FROMKERNEL (patch from Oleg, thanks
again :)
do_notify_parent and do_notify_parent_cldstop: map task's uid to parent's
user namespace
ptrace_signal maps parent's uid into current's user namespace before
including in signal to current. IIUC Oleg has argued that this shouldn't
matter as the debugger will play with it, but it seems like not converting
the value currently being set is misleading.
Changelog:
Sep 20: Inspired by Oleg's suggestion, define map_cred_ns() helper to
simplify callers and help make clear what we are translating
(which uid into which namespace). Passing the target task would
make callers even easier to read, but we pass in user_ns because
current_user_ns() != task_cred_xxx(current, user_ns).
Sep 20: As recommended by Oleg, also put task_pid_vnr() under rcu_read_lock
in ptrace_signal().
Sep 23: In send_signal(), detect when (user) signal is coming from an
ancestor or unrelated user namespace. Pass that on to __send_signal,
which sets si_uid to 0 or overflowuid if needed.
Oct 12: Base on Oleg's fixup_uid() patch. On top of that, handle all
SI_FROMKERNEL cases at callers, because we can't assume sender is
current in those cases.
Nov 10: (mhelsley) rename fixup_uid to more meaningful usern_fixup_signal_uid
Nov 10: (akpm) make the !CONFIG_USER_NS case clearer
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
From: Serge Hallyn <serge.hallyn@canonical.com>
Subject: __send_signal: pass q->info, not info, to userns_fixup_signal_uid (v2)
Eric Biederman pointed out that passing info is a bug and could lead to a
NULL pointer deref to boot.
A collection of signal, securebits, filecaps, cap_bounds, and a few other
ltp tests passed with this kernel.
Changelog:
Nov 18: previous patch missed a leading '&'
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
From: Dan Carpenter <dan.carpenter@oracle.com>
Subject: ipc/mqueue: lock() => unlock() typo
There was a double lock typo introduced in b085f4bd6b21 "user namespace:
make signal.c respect user namespaces"
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vfs_create() ignores everything outside of 16bit subset of its
mode argument; switching it to umode_t is obviously equivalent
and it's the only caller of the method
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
include/linux/sem.h contains several structures that are only used within
ipc/sem.c.
The patch moves them into ipc/sem.c - there is no need to expose the
structures to the whole kernel.
No functional changes, only whitespace cleanups and 80-char per line
fixes.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
semtimedop() does not handle spurious wakeups, it returns -EINTR to user
space. Most other schedule() users would just loop and not return to user
space. The patch adds such a loop to semtimedop()
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sys_semtimedop() may return -EIDRM although the semaphore operation
completed successfully:
thread 1: thread 2:
semtimedop(), sleeps
semop():
* acquires sem_lock()
semtimedop() woken up due to timeout
sem_lock() loops
* notices that thread 2 could be completed.
* performs the operations that thread 2 is sleeping on.
* marks the semaphore operation as IN_WAKEUP
* drops sem_lock(), does wakeup, sets return code to 0
* thread delayed due to interrupt, whatever
* returns to user space
* thread still delayed
semctl(IPC_RMID)
* acquires sem_lock()
* ipc_rmid(), ipcp->deleted=1
* drops sem_lock()
* thread finally continues - but seem_lock()
now fails due to ipcp->deleted == 1
* returns -EIDRM instead of 0
The fix is trivial: Always use the return code in queue.status.
In real world, the race probably doesn't matter:
If the semaphore array is destroyed, the app is probably not interested
if the last operation succeeded or was already cancelled.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the wrong use of schedule_hrtimeout_range_clock() in wq_sleep(),
although it is harmless for the syscall mq_timed* now. It was introduced
by 9ca7d8e ("mqueue: Convert message queue timeout to use hrtimers").
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This isn't really critical any more, since other patches (commit
298507d4d2cf: "shm: optimize exit_shm()") have caused us to not actually
need to touch the rw_mutex unless there are actual shm segments
associated with the namespace, but we really should do tne shm_init_ns()
earlier than we do now.
This, together with commit 288d5abec8 ("Boot up with usermodehelper
disabled") will mean that we really do initialize the initial ipc
namespace data structure before we run any tasks.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We may optimistically check .in_use == 0 without holding the rw_mutex:
it's the common case, and if it's zero, there certainly won't be any
segments associated with us.
After taking the lock, the idr_for_each() will do the right thing, so we
could now drop the re-check inside the lock without any real cost. But
it won't hurt.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 4c677e2eef ("shm: optimize locking and ipc_namespace getting")
introduced a copy-paste bug. Due to the bug cycle optimizations were
disabled.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shm_lock() does a lookup of shm segment in shm_ids(ns).ipcs_idr, which
is redundant as we already know shmid_kernel address. An actual lock is
also not required for reads until we really want to destroy the segment.
exit_shm() and shm_destroy_orphaned() may avoid the loop by checking
whether there is at least one segment in current ipc_namespace.
The check of nsproxy and ipc_ns against NULL is redundant as exit_shm()
is called from do_exit() before the call to exit_notify(), so the
dereferencing current->nsproxy->ipc_ns is guaranteed to be safe.
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shm_try_destroy_orphaned() and shm_try_destroy_current() didn't handle
the case of separate PID namespaces, but a single IPC namespace. If
there are tasks with the same PID values using the same shmem object,
the wrong destroy decision could be reached.
On shm segment creation store the pointer to the creator task in
shmid_kernel->shm_creator field and zero it on task exit. Then
use the ->shm_creator insread of shm_cprid in both functions. As
shmid_kernel object is already locked at this stage, no additional
locking is needed.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for the shm_rmid_forced sysctl. If set to 1, all shared
memory objects in current ipc namespace will be automatically forced to
use IPC_RMID.
The POSIX way of handling shmem allows one to create shm objects and
call shmdt(), leaving shm object associated with no process, thus
consuming memory not counted via rlimits.
With shm_rmid_forced=1 the shared memory object is counted at least for
one process, so OOM killer may effectively kill the fat process holding
the shared memory.
It obviously breaks POSIX - some programs relying on the feature would
stop working. So set shm_rmid_forced=1 only if you're sure nobody uses
"orphaned" memory. Use shm_rmid_forced=0 by default for compatability
reasons.
The feature was previously impemented in -ow as a configure option.
[akpm@linux-foundation.org: fix documentation, per Randy]
[akpm@linux-foundation.org: fix warning]
[akpm@linux-foundation.org: readability/conventionality tweaks]
[akpm@linux-foundation.org: fix shm_rmid_forced/shm_forced_rmid confusion, use standard comment layout]
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Solar Designer <solar@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We return ENOMEM from mqueue_get_inode even when we have enough memory.
Namely in case the system rlimit of mqueue was reached. This error
propagates to mq_queue and user sees the error unexpectedly. So fix
this up to properly return EMFILE as described in the manpage:
EMFILE The process already has the maximum number of files and
message queues open.
instead of:
ENOMEM Insufficient memory.
With the previous patch we just switch to ERR_PTR/PTR_ERR/IS_ERR error
handling here.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If new_inode fails to allocate an inode we need only to return with
NULL. But now we test the opposite and have all the work in a nested
block. So do the opposite to save one indentation level (and remove
unnecessary line breaks).
This is only a preparation/cleanup for the next patch where we fix up
return values from mqueue_get_inode.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a semaphore array is removed and in parallel a sleeping task is woken
up (signal or timeout, does not matter), then the woken up task does not
wait until wake_up_sem_queue_do() is completed. This will cause crashes,
because wake_up_sem_queue_do() will read from a stale pointer.
The fix is simple: Regardless of anything, always call get_queue_result().
This function waits until wake_up_sem_queue_do() has finished it's task.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=27142
Reported-by: Yuriy Yevtukhov <yuriy@ucoz.com>
Reported-by: Harald Laabs <kernel@dasr.de>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: <stable@kernel.org> [2.6.35+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
isofs: Remove global fs lock
jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
mm/truncate.c: fix build for CONFIG_BLOCK not enabled
fs:update the NOTE of the file_operations structure
Remove dead code in dget_parent()
AFS: Fix silly characters in a comment
switch d_add_ci() to d_splice_alias() in "found negative" case as well
simplify gfs2_lookup()
jfs_lookup(): don't bother with . or ..
get rid of useless dget_parent() in btrfs rename() and link()
get rid of useless dget_parent() in fs/btrfs/ioctl.c
fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
drivers: fix up various ->llseek() implementations
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
Ext4: handle SEEK_HOLE/SEEK_DATA generically
Btrfs: implement our own ->llseek
fs: add SEEK_HOLE and SEEK_DATA flags
reiserfs: make reiserfs default to barrier=flush
...
Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The rcu callback ipc_immediate_free() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(ipc_immediate_free).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu callback free_un() just calls a kfree(),
so we use kfree_rcu() instead of the call_rcu(free_un).
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The type of vma->vm_flags is 'unsigned long'. Neither 'int' nor
'unsigned int'. This patch fixes such misuse.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
[ Changed to use a typedef - we'll extend it to cover more cases
later, since there has been discussion about making it a 64-bit
type.. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix ipc/util.c kernel-doc warnings:
Warning(ipc/util.c:336): No description found for parameter 'ns'
Warning(ipc/util.c:620): No description found for parameter 'ns'
Warning(ipc/util.c:790): No description found for parameter 'ns'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit b515498 ("userns: add a user namespace owner of ipc ns") added a
user namespace owner of ipc ns, but it also introduced a use after free in
free_ipc_ns().
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CAP_IPC_OWNER and CAP_IPC_LOCK can be checked against current_user_ns(),
because the resource comes from current's own ipc namespace.
setuid/setgid are to uids in own namespace, so again checks can be against
current_user_ns().
Changelog:
Jan 11: Use task_ns_capable() in place of sched_capable().
Jan 11: Use nsown_capable() as suggested by Bastian Blank.
Jan 11: Clarify (hopefully) some logic in futex and sched.c
Feb 15: use ns_capable for ipc, not nsown_capable
Feb 23: let copy_ipcs handle setting ipc_ns->user_ns
Feb 23: pass ns down rather than taking it from current
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changelog:
Feb 15: Don't set new ipc->user_ns if we didn't create a new
ipc_ns.
Feb 23: Move extern declaration to ipc_namespace.h, and group
fwd declarations at top.
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
The shmid_ds structure is copied to userland with shm_unused{,2,3}
fields unitialized. It leads to leaking of contents of kernel stack
memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This takes care of leaking uninitialized kernel stack memory to
userspace from non-zeroed fields in structs in compat ipc functions.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The kernel currently provides no functionality to analyze the RSS and swap
space usage of each individual sysvipc shared memory segment.
This patch adds this info for each existing shm segment by extending the
output of /proc/sysvipc/shm by two columns for RSS and swap.
Since shmctl(SHM_INFO) already provides a similiar calculation (it
currently sums up all RSS/swap info for all segments), I did split out a
static function which is now used by the /proc/sysvipc/shm output and
shmctl(SHM_INFO).
SAP products (esp. the SAP Netweaver ABAP Kernel) uses lots of big shared
memory segments (we often have Linux systems with >= 16GB shm usage).
Sometimes we get customer reports about "slow" system responses and while
looking into their configurations we often find massive swapping activity
on the system. With this patch it's now easy to see from the command line
if and which shm segments gets swapped out (and how much) and can more
easily give recommendations for system tuning. Without the patch it's
currently not possible to do such shm analysis at all.
Also...
Add some spaces in front of the "size" field for 64bit kernels to get the
columns correct if you cat the contents of the file. In
sysvipc_shm_proc_show() the kernel prints the size value in "SPEC_SIZE"
format, which is defined like this:
#if BITS_PER_LONG <= 32
#define SIZE_SPEC "%10lu"
#else
#define SIZE_SPEC "%21lu"
#endif
So, if the header is not adjusted, the columns are not correctly aligned.
I actually tested this on 32- and 64-bit and it seems correct now.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves. For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
vfs: make no_llseek the default
vfs: don't use BKL in default_llseek
llseek: automatically add .llseek fop
libfs: use generic_file_llseek for simple_attr
mac80211: disallow seeks in minstrel debug code
lirc: make chardev nonseekable
viotape: use noop_llseek
raw: use explicit llseek file operations
ibmasmfs: use generic_file_llseek
spufs: use llseek in all file operations
arm/omap: use generic_file_llseek in iommu_debug
lkdtm: use generic_file_llseek in debugfs
net/wireless: use generic_file_llseek in debugfs
drm: use noop_llseek
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
The semctl syscall has several code paths that lead to the leakage of
uninitialized kernel stack memory (namely the IPC_INFO, SEM_INFO,
IPC_STAT, and SEM_STAT commands) during the use of the older, obsolete
version of the semid_ds struct.
The copy_semid_to_user() function declares a semid_ds struct on the stack
and copies it back to the user without initializing or zeroing the
"sem_base", "sem_pending", "sem_pending_last", and "undo" pointers,
allowing the leakage of 16 bytes of kernel stack memory.
The code is still reachable on 32-bit systems - when calling semctl()
newer glibc's automatically OR the IPC command with the IPC_64 flag, but
invoking the syscall directly allows users to use the older versions of
the struct.
Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The last change to improve the scalability moved the actual wake-up out of
the section that is protected by spin_lock(sma->sem_perm.lock).
This means that IN_WAKEUP can be in queue.status even when the spinlock is
acquired by the current task. Thus the same loop that is performed when
queue.status is read without the spinlock acquired must be performed when
the spinlock is acquired.
Thanks to kamezawa.hiroyu@jp.fujitsu.com for noticing lack of the memory
barrier.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16255
[akpm@linux-foundation.org: clean up kerneldoc, checkpatch warning and whitespace]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Luca Tettamanti <kronos.it@gmail.com>
Tested-by: Luca Tettamanti <kronos.it@gmail.com>
Reported-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It never hashes them anyway and does final iput() immediately
afterwards. With ->drop_inode() being generic_delete_inode()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T x;
identifier f;
@@
T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
...+> }
@@
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipc/sem.c begins with a 15 year old description about bugs in the initial
implementation in Linux-1.0. The patch replaces that with a top level
description of the current code.
A TODO could be derived from this text:
The opengroup man page for semop() does not mandate FIFO. Thus there is
no need for a semaphore array list of pending operations.
If
- this list is removed
- the per-semaphore array spinlock is removed (possible if there is no
list to protect)
- sem_otime is moved into the semaphores and calculated on demand during
semctl()
then the array would be read-mostly - which would significantly improve
scaling for applications that use semaphore arrays with lots of entries.
The price would be expensive semctl() calls:
for(i=0;i<sma->sem_nsems;i++) spin_lock(sma->sem_lock);
<do stuff>
for(i=0;i<sma->sem_nsems;i++) spin_unlock(sma->sem_lock);
I'm not sure if the complexity is worth the effort, thus here is the
documentation of the current behavior first.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The wake-up part of semtimedop() consists out of two steps:
- the right tasks must be identified.
- they must be woken up.
Right now, both steps run while the array spinlock is held. This patch
reorders the code and moves the actual wake_up_process() behind the point
where the spinlock is dropped.
The code also moves setting sem->sem_otime to one place: It does not make
sense to set the last modify time multiple times.
[akpm@linux-foundation.org: repair kerneldoc]
[akpm@linux-foundation.org: fix uninitialised retval]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following series of patches tries to fix the spinlock contention
reported by Chris Mason - his benchmark exposes problems of the current
code:
- In the worst case, the algorithm used by update_queue() is O(N^2).
Bulk wake-up calls can enter this worst case. The patch series fix
that.
Note that the benchmark app doesn't expose the problem, it just should
be fixed: Real world apps might do the wake-ups in another order than
perfect FIFO.
- The part of the code that runs within the semaphore array spinlock is
significantly larger than necessary.
The patch series fixes that. This change is responsible for the main
improvement.
- The cacheline with the spinlock is also used for a variable that is
read in the hot path (sem_base) and for a variable that is unnecessarily
written to multiple times (sem_otime). The last step of the series
cacheline-aligns the spinlock.
This patch:
The SysV semaphore code allows to perform multiple operations on all
semaphores in the array as atomic operations. After a modification,
update_queue() checks which of the waiting tasks can complete.
The algorithm that is used to identify the tasks is O(N^2) in the worst
case. For some cases, it is simple to avoid the O(N^2).
The patch adds a detection logic for some cases, especially for the case
of an array where all sleeping tasks are single sembuf operations and a
multi-sembuf operation is used to wake up multiple tasks.
A big database application uses that approach.
The patch fixes wakeup due to semctl(,,SETALL,) - the initial version of
the patch breaks that.
[akpm@linux-foundation.org: make do_smart_update() static]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
USHORT_MAX/SHORT_MAX/SHORT_MIN.
- Make SHRT_MIN of type s16, not int, for consistency.
[akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
[akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: Add clocksource_register_hz/khz interface
posix-cpu-timers: Optimize run_posix_cpu_timers()
time: Remove xtime_cache
mqueue: Convert message queue timeout to use hrtimers
hrtimers: Provide schedule_hrtimeout for CLOCK_REALTIME
timers: Introduce the concept of timer slack for legacy timers
ntp: Remove tickadj
ntp: Make time_adjust static
time: Add xtime, wall_to_monotonic to feature-removal-schedule
timer: Try to survive timer callback preempt_count leak
timer: Split out timer function call
timer: Print function name for timer callbacks modifying preemption count
time: Clean up warp_clock()
cpu-timers: Avoid iterating over all threads in fastpath_timer_check()
cpu-timers: Change SIGEV_NONE timer implementation
cpu-timers: Return correct previous timer reload value
cpu-timers: Cleanup arm_timer()
cpu-timers: Simplify RLIMIT_CPU handling
In case of aborting because we reach the maximum amount of memory which
can be allocated to message queues per user (RLIMIT_MSGQUEUE), we would
try to free the message area twice when bailing out: first by the error
handling code itself, and then later when cleaning up the inode through
delete_inode().
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The message queue functions mq_timedsend() and mq_timedreceive()
have not yet been converted to use the hrtimer interface.
This patch replaces the call to schedule_timeout() by a call to
schedule_hrtimeout() and transforms the expiration time from
timespec to ktime as required.
[ tglx: Fixed whitespace wreckage ]
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Tested-by: Pradyumna Sampath <pradysam@gmail.com>
Cc: Arjan van de Veen <arjan@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100402204331.715783034@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
I chased down a fail on ppc64 on 2.6.34-rc2 where an application that
uses shared memory was getting a SEGV.
Commit baed7fc9b5 ("Add generic sys_ipc
wrapper") changed the second argument from an unsigned long to an int.
When we call shmget the system call wrappers for sys_ipc will sign
extend second (ie the size) which truncates it. It took a while to
track down because the call succeeds and strace shows the untruncated
size :)
The patch below changes second from an int to an unsigned long which
fixes shmget on ppc64 (and I assume s390, sparc64 and mips64).
Signed-off-by: Anton Blanchard <anton@samba.org>
--
I assume the function prototypes for the other IPC methods would cause us
to sign or zero extend second where appropriate (avoiding any security
issues). Come to think of it, the syscall wrappers for each method should do
that for us as well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make sure compiler won't do weird things with limits. E.g. fetching them
twice may return 2 different values after writable limits are implemented.
I.e. either use rlimit helpers added in
3e10e716ab ("resource: add helpers for
fetching rlimits") or ACCESS_ONCE if not applicable.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a generic implementation of the ipc demultiplexer syscall. Except for
s390 and sparc64 all implementations of the sys_ipc are nearly identical.
There are slight differences in the types of the parameters, where mips
and powerpc as the only 64-bit architectures with sys_ipc use unsigned
long for the "third" argument as it gets casted to a pointer later, while
it traditionally is an "int" like most other paramters. frv goes even
further and uses unsigned long for all parameters execept for "ptr" which
is a pointer type everywhere. The change from int to unsigned long for
"third" and back to "int" for the others on frv should be fine due to the
in-register calling conventions for syscalls (we already had a similar
issue with the generic sys_ptrace), but I'd prefer to have the arch
maintainers looks over this in details.
Except for that h8300, m68k and m68knommu lack an impplementation of the
semtimedop sub call which this patch adds, and various architectures have
gets used - at least on i386 it seems superflous as the compat code on
x86-64 and ia64 doesn't even bother to implement it.
[akpm@linux-foundation.org: add sys_ipc to sys_ni.c]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... postponing assignments until they're needed. Doesn't change code size.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It reduces code size:
text data bss dec hex filename
9925 72 16 10013 271d ipc/mqueue-BEFORE.o
9885 72 16 9973 26f5 ipc/mqueue-AFTER.o
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Code size reduction:
text data bss dec hex filename
9941 72 16 10029 272d ipc/mqueue-BEFORE.o
9925 72 16 10013 271d ipc/mqueue-AFTER.o
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and abort earlier if we couldn't allocate the message pointers array,
avoiding the u->mq_bytes accounting logic.
It reduces code size:
text data bss dec hex filename
9949 72 16 10037 2735 ipc/mqueue-BEFORE.o
9941 72 16 10029 272d ipc/mqueue-AFTER.o
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit c4caa77815 ("file
->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()")
broke SYSV SHM for NOMMU by taking away the pointer to
shm_get_unmapped_area() from shm_file_operations.
Put it back conditionally on CONFIG_MMU=n.
file->f_ops->get_unmapped_area() is used to find out the base address for a
mapping of a mappable chardev device or mappable memory-based file (such as a
ramfs file). It needs to be called prior to file->f_ops->mmap() being called.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (38 commits)
direct I/O fallback sync simplification
ocfs: stop using do_sync_mapping_range
cleanup blockdev_direct_IO locking
make generic_acl slightly more generic
sanitize xattr handler prototypes
libfs: move EXPORT_SYMBOL for d_alloc_name
vfs: force reval of target when following LAST_BIND symlinks (try #7)
ima: limit imbalance msg
Untangling ima mess, part 3: kill dead code in ima
Untangling ima mess, part 2: deal with counters
Untangling ima mess, part 1: alloc_file()
O_TRUNC open shouldn't fail after file truncation
ima: call ima_inode_free ima_inode_free
IMA: clean up the IMA counts updating code
ima: only insert at inode creation time
ima: valid return code from ima_inode_alloc
fs: move get_empty_filp() deffinition to internal.h
Sanitize exec_permission_lite()
Kill cached_lookup() and real_lookup()
Kill path_lookup_open()
...
Trivial conflicts in fs/direct-io.c
* do ima_get_count() in __dentry_open()
* stop doing that in followups
* move ima_path_check() to right after nameidata_to_filp()
* don't bump counters on it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are 2 groups of alloc_file() callers:
* ones that are followed by ima_counts_get
* ones giving non-regular files
So let's pull that ima_counts_get() into alloc_file();
it's a no-op in case of non-regular files.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This line is unreachable, remove it.
[akpm@linux-foundation.org: remove unneeded initialisation of `err']
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If multiple simple decrements on the same semaphore are pending, then the
current code scans all decrement operations, even if the semaphore value
is already 0.
The patch optimizes that: if the semaphore value is 0, then there is no
need to scan the q->alter entries.
Note that this is a common case: It happens if 100 decrements by one are
pending and now an increment by one increases the semaphore value from 0
to 1. Without this patch, all 100 entries are scanned. With the patch,
only one entry is scanned, then woken up. Then the new rule triggers and
the scanning is aborted, without looking at the remaining 99 tasks.
With this patch, single sop increment/decrement by 1 are now O(1).
(same as with Nick's patch)
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysv sem has the concept of semaphore arrays that consist out of multiple
semaphores. Atomic operations that affect multiple semaphores are
supported.
The patch optimizes single semaphore operation calls that affect only one
semaphore: It's not necessary to scan all pending operations, it is
sufficient to scan the per-semaphore list.
The idea is from Nick Piggin version of an ipc sem improvement, the
implementation is different: The code tries to keep as much common code as
possible.
As the result, the patch is simpler, but optimizes fewer cases.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on Nick's findings:
sysv sem has the concept of semaphore arrays that consist out of multiple
semaphores. Atomic operations that affect multiple semaphores are
supported.
The patch is the first step for optimizing simple, single semaphore
operations: In addition to the global list of all pending operations, a
2nd, per-semaphore list with the simple operations is added.
Note: this patch does not make sense by itself, the new list is used
nowhere.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reduce the amount of scanning of the list of pending semaphore operations:
If try_atomic_semop failed, then no changes were applied. Thus no need to
restart.
Additionally, this patch correct an incorrect comment: It's possible to
wait for arbitrary semaphore values (do a dec by <x>, wait-for-zero, inc
by <x> in one atomic operation)
Both changes are from Nick Piggin, the patch is the result of a different
split of the individual changes.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Pierre Peiffer <peifferp@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro