I was unsure of the JOURNAL_ACCESS parameters in
ocfs2_cp_xattr_cluster(). They're based on the function argument
't_is_new', but I couldn't quite figure out how t_is_new mapped to
allocation. ocfs2_cp_xattr_cluster() actually overwrites the target,
regardless of t_is_new.
Well, I just figured it out. So I'm adding a big fat comment for those
who come after me. ocfs2_divide_xattr_cluster() has the same behavior.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_cp_xattr_cluster() takes the last bucket of a full extent and
copies it over to a new extent. It then updates the headers of both
extents to reflect the new state. It is passed the first bh of
the first bucket in order to update that first extent's bucket count.
It reads and dirties the first bh of the new extent for the same reason.
However, future code wants to always dirty the entire bucket when it
is changed. So it is changed to read the entire bucket it is updating
for both extents.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_extend_xattr_bucket() takes an extent of buckets and shifts some
of them down to make room for a new xattr. It is passed the first bh of
the first bucket, because that is where we store the number of buckets
in the extent.
However, future code wants to always dirty the entire bucket when it
is changed. So let's pass the entire bucket into this function, skip
any block reads (we have them), and add the access/dirty logic. We also
can skip passing in the target bucket bh - we only need its block
number.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We move the transaction into the loop because in
ocfs2_remove_extent, we will double the credits in function
ocfs2_extend_rotate_transaction. So if we have a large loop
number, we will soon waste much the journal space.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_bucket_value_truncate() currently takes the first bh of the
bucket, and magically plays around with the value bh - even though
the bucket structure in the calling function already has it.
In addition, future code wants to always dirty the entire bucket when it
is changed. So let's pass the entire bucket into this function, skip
any block reads (we have them), and add the access/dirty logic.
ocfs2_xattr_update_value_size() is no longer necessary, as it only did
one thing other than journal access/dirty.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Fix 2 minor things in quota. They are both found by sparse check.
1. an endian bug in ocfs2_local_quota_add_chunk.
2. change olq_alloc_dquot to static.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
These are default functions for creating and destroying quota structures
and they should be used from filesystems.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
fs/ocfs2/quota_local.c: In function 'olq_set_dquot':
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 7 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 8 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 7 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 8 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 7 has type '__le64'
fs/ocfs2/quota_local.c:844: warning: format '%lld' expects type 'long long int', but argument 8 has type '__le64'
fs/ocfs2/quota_global.c: In function '__ocfs2_sync_dquot':
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 8 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 10 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 8 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 10 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 8 has type 's64'
fs/ocfs2/quota_global.c:457: warning: format '%lld' expects type 'long long int', but argument 10 has type 's64'
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Make function return error status and not buffer pointer so that it's
consistent with ocfs2_read_quota_block().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We have to mark buffer as uptodate before calling ocfs2_journal_access() and
ocfs2_set_buffer_uptodate() does not do this for us.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
ocfs2_bread() has become ocfs2_read_virt_blocks(), with a prototype to
match ocfs2_read_blocks(). The quota code, converting from
ocfs2_bread(), wraps the call to ocfs2_read_virt_blocks() in
ocfs2_read_quota_block(). Unfortunately, the prototype of
ocfs2_read_quota_block() matches the old prototype of ocfs2_bread().
The problem is that ocfs2_bread() returned the buffer head, and callers
assumed that a NULL pointer was indicative of error. It wasn't. This
is why ocfs2_bread() took an int*err argument as well.
The new prototype of ocfs2_read_virt_blocks() avoids this error handling
confusion. Let's change ocfs2_read_quota_block() to match.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Enable quota usage tracking on mount and disable it on umount. Also
add support for quota on and quota off quotactls and usrquota and
grpquota mount options. Add quota features among supported ones.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Implement functions for recovery after a crash. Functions just
read local quota file and sync info to global quota file.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
This patch creates a work queue for periodic syncing of locally cached quota
information to the global quota files. We constantly queue a delayed work
item, to get the periodic behavior.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
Add quota calls for allocation and freeing of inodes and space, also update
estimates on number of needed credits for a transaction. Move out inode
allocation from ocfs2_mknod_locked() because vfs_dq_init() must be called
outside of a transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
For each quota type each node has local quota file. In this file it stores
changes users have made to disk usage via this node. Once in a while this
information is synced to global file (and thus with other nodes) so that
limits enforcement at least aproximately works.
Global quota files contain all the information about usage and limits. It's
mostly handled by the generic VFS code (which implements a trie of structures
inside a quota file). We only have to provide functions to convert structures
from on-disk format to in-memory one. We also have to provide wrappers for
various quota functions starting transactions and acquiring necessary cluster
locks before the actual IO is really started.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Mark system files as not subject to quota accounting. This prevents
possible recursions into quota code and thus deadlocks.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
OCFS2 can easily support nested transactions. We just have to
take care and not spoil statistics acquire semaphore unnecessarily.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
OCFS2 needs to scan all active dquots once in a while and sync quota
information among cluster nodes. Provide a helper function for it so
that it does not have to reimplement internally a list which VFS
already has. Moreover this function is probably going to be useful
for other clustered filesystems if they decide to use VFS quotas.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
OCFS2 needs to peek whether quota structure is already in memory so
that it can avoid expensive cluster locking in that case. Similarly
when freeing dquots, it checks whether it is the last quota structure
user or not. Finally, it needs to get reference to dquot structure for
specified id and quota type when recovering quota file after crash.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Quota in a clustered environment needs to synchronize quota information
among cluster nodes. This means we have to occasionally update some
information in dquot from disk / network. On the other hand we have to
be careful not to overwrite changes administrator did via SETQUOTA.
So indicate in dquot->dq_flags which entries have been set by SETQUOTA
and quota format can clear these flags when it properly propagated
the changes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
For clustered filesystems, it can happen that space / inode usage goes
negative temporarily (because some node is allocating another node
is freeing and they are not completely in sync). So let quota code
allow this and change qsize_t so a signed type so that we don't
underflow the variables.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Coming quota support for OCFS2 is going to need quite a bit
of additional per-sb quota information. Moreover having fs.h
include all the types needed for this structure would be a
pain in the a**. So remove the union from mem_dqinfo and add
a private pointer for filesystem's use.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
There is going to be a new version of quota format having 64-bit
quota limits and a new quota format for OCFS2. They are both
going to use the same tree structure as VFSv0 quota format. So
split out tree handling into a separate file and make size of
leaf blocks, amount of space usable in each block (needed for
checksumming) and structures contained in them configurable
so that the code can be shared.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Since these include files are used only by implementation of quota formats,
there's no need to have them in include/linux/.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
If filesystem can handle quota files as system files hidden from users, we can
skip a lot of cache invalidation, syncing, inode flags setting etc. when
turning quotas on, off and quota_sync. Allow filesystem to indicate that it is
hiding quota files from users by DQUOT_QUOTA_SYS_FILE flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Split DQUOT_USR_ENABLED (and DQUOT_GRP_ENABLED) into DQUOT_USR_USAGE_ENABLED
and DQUOT_USR_LIMITS_ENABLED. This way we are able to separately enable /
disable whether we should:
1) ignore quotas completely
2) just keep uptodate information about usage
3) actually enforce quota limits
This is going to be useful when quota is treated as filesystem metadata - we
then want to keep quota information uptodate all the time and just enable /
disable limits enforcement.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Upto now, DQUOT_USR_SUSPENDED behaved like a state - i.e., either quota
was enabled or suspended or none. Now allowed states are 0, ENABLED,
ENABLED | SUSPENDED. This will be useful later when we implement separate
enabling of quota usage tracking and limits enforcement because we need to
keep track of a state which has been suspended.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Checks like <= 0 for an unsigned type do not make much sence. The value
could be only 0 and that does not happen often enough for the check
to be worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
So far quota was fine with quota block limits and inode limits/numbers in
a 32-bit type. Now with rapid increase in storage sizes there are coming
requests to be able to handle quota limits above 4TB / more that 2^32 inodes.
So bump up sizes of types in mem_dqblk structure to 64-bits to be able to
handle this. Also update inode allocation / checking functions to use qsize_t
and make global structure keep quota limits in bytes so that things are
consistent.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Some filesystems would like to keep private information together with each
dquot. Add callbacks alloc_dquot and destroy_dquot allowing filesystem to
allocate larger dquots from their private slab in a similar fashion we
currently allocate inodes.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
During an xattr set, when we move a xattr which was stored in inode to the
outside bucket, we have to delete it and it will use the old value of
xis->not_found. xis->not_found is removed by ocfs2_calc_xattr_set_need
though, so we must restore it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
When we extend one xattr's value to a large size, the old value size might
be smaller than the size of a value root. In those cases, we still need to
guess the metadata allocation.
Reported-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
JBD2 is fully backwards compatible with JBD and it's been tested enough with
Ocfs2 that we can clean this code up now.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Now that we've centralized the ocfs2_read_virt_blocks() code, let's use
it in ocfs2_read_dir_block().
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
The ocfs2_read_dir_block() function really maps an inode's virtual
blocks to physical ones before calling ocfs2_read_blocks(). Let's
extract that to common code, because other places might want to do that.
Other than the block number being virtual, ocfs2_read_virt_blocks()
takes the same arguments as ocfs2_read_blocks(). It converts those
virtual block numbers to physical before calling ocfs2_read_blocks()
directly. If the blocks asked for are discontiguous, this can mean
multiple calls to ocfs2_read_blocks(), but this is mostly hidden from
the caller.
Like ocfs2_read_blocks(), the caller can pass in an existing
buffer_head. This is usually done to pick up some readahead I/O.
ocfs2_read_virt_blocks() checks the buffer_head's block number
against the extent map - it must match.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Add an optional validation hook to ocfs2_read_blocks(). Now the
validation function is only called when a block was actually read off of
disk. It is not called when the buffer was in cache.
We add a buffer state bit BH_NeedsValidate to flag these buffers. It
must always be one higher than the last JBD2 buffer state bit.
The dinode, dirblock, extent_block, and xattr_block validators are
lifted to this scheme directly. The group_descriptor validator needs to
be split into two pieces. The first part only needs the gd buffer and
is passed to ocfs2_read_block(). The second part requires the dinode as
well, and is called every time. It's only 3 compares, so it's tiny.
This also allows us to clean up the non-fatal gd check used by resize.c.
It now has no magic argument.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We weren't consistently checking xattr blocks after we read them.
Most places checked the signature, but none checked xb_blkno or
xb_fs_signature. Create a toplevel ocfs2_read_xattr_block() that does
the read and the validation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We have ocfs2_bread() as a vestige of the original ext-based dir code.
It's only used by directories, though. Turn it into
ocfs2_read_dir_block(), with a prototype matching the other metadata
read functions. It's set up to validate dirblocks when the time comes.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
We weren't consistently checking extent blocks after we read them.
Most places checked the signature, but none checked h_blkno or
h_fs_signature. Create a toplevel ocfs2_read_extent_block() that does
the read and the validation.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>