Commit Graph

320 Commits

Author SHA1 Message Date
Steven Rostedt (VMware) 17911ff38a tracing: Add locked_down checks to the open calls of files created for tracefs
Added various checks on open tracefs calls to see if tracefs is in lockdown
mode, and if so, to return -EPERM.

Note, the event format files (which are basically standard on all machines)
as well as the enabled_functions file (which shows what is currently being
traced) are not lockde down. Perhaps they should be, but it seems counter
intuitive to lockdown information to help you know if the system has been
modified.

Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.com

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-12 20:48:06 -04:00
Steven Rostedt (VMware) 8530dec63e tracing: Add tracing_check_open_get_tr()
Currently, most files in the tracefs directory test if tracing_disabled is
set. If so, it should return -ENODEV. The tracing_disabled is called when
tracing is found to be broken. Originally it was done in case the ring
buffer was found to be corrupted, and we wanted to prevent reading it from
crashing the kernel. But it's also called if a tracing selftest fails on
boot. It's a one way switch. That is, once it is triggered, tracing is
disabled until reboot.

As most tracefs files can also be used by instances in the tracefs
directory, they need to be carefully done. Each instance has a trace_array
associated to it, and when the instance is removed, the trace_array is
freed. But if an instance is opened with a reference to the trace_array,
then it requires looking up the trace_array to get its ref counter (as there
could be a race with it being deleted and the open itself). Once it is
found, a reference is added to prevent the instance from being removed (and
the trace_array associated with it freed).

Combine the two checks (tracing_disabled and trace_array_get()) into a
single helper function. This will also make it easier to add lockdown to
tracefs later.

Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-12 20:44:07 -04:00
Steven Rostedt (VMware) aa07d71f1b tracing: Have trace events system open call tracing_open_generic_tr()
Instead of having the trace events system open call open code the taking of
the trace_array descriptor (with trace_array_get()) and then calling
trace_open_generic(), have it use the tracing_open_generic_tr() that does
the combination of the two. This requires making tracing_open_generic_tr()
global.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-12 20:43:00 -04:00
Linus Torvalds 7e67a85999 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:

 - MAINTAINERS: Add Mark Rutland as perf submaintainer, Juri Lelli and
   Vincent Guittot as scheduler submaintainers. Add Dietmar Eggemann,
   Steven Rostedt, Ben Segall and Mel Gorman as scheduler reviewers.

   As perf and the scheduler is getting bigger and more complex,
   document the status quo of current responsibilities and interests,
   and spread the review pain^H^H^H^H fun via an increase in the Cc:
   linecount generated by scripts/get_maintainer.pl. :-)

 - Add another series of patches that brings the -rt (PREEMPT_RT) tree
   closer to mainline: split the monolithic CONFIG_PREEMPT dependencies
   into a new CONFIG_PREEMPTION category that will allow the eventual
   introduction of CONFIG_PREEMPT_RT. Still a few more hundred patches
   to go though.

 - Extend the CPU cgroup controller with uclamp.min and uclamp.max to
   allow the finer shaping of CPU bandwidth usage.

 - Micro-optimize energy-aware wake-ups from O(CPUS^2) to O(CPUS).

 - Improve the behavior of high CPU count, high thread count
   applications running under cpu.cfs_quota_us constraints.

 - Improve balancing with SCHED_IDLE (SCHED_BATCH) tasks present.

 - Improve CPU isolation housekeeping CPU allocation NUMA locality.

 - Fix deadline scheduler bandwidth calculations and logic when cpusets
   rebuilds the topology, or when it gets deadline-throttled while it's
   being offlined.

 - Convert the cpuset_mutex to percpu_rwsem, to allow it to be used from
   setscheduler() system calls without creating global serialization.
   Add new synchronization between cpuset topology-changing events and
   the deadline acceptance tests in setscheduler(), which were broken
   before.

 - Rework the active_mm state machine to be less confusing and more
   optimal.

 - Rework (simplify) the pick_next_task() slowpath.

 - Improve load-balancing on AMD EPYC systems.

 - ... and misc cleanups, smaller fixes and improvements - please see
   the Git log for more details.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
  sched/psi: Correct overly pessimistic size calculation
  sched/fair: Speed-up energy-aware wake-ups
  sched/uclamp: Always use 'enum uclamp_id' for clamp_id values
  sched/uclamp: Update CPU's refcount on TG's clamp changes
  sched/uclamp: Use TG's clamps to restrict TASK's clamps
  sched/uclamp: Propagate system defaults to the root group
  sched/uclamp: Propagate parent clamps
  sched/uclamp: Extend CPU's cgroup controller
  sched/topology: Improve load balancing on AMD EPYC systems
  arch, ia64: Make NUMA select SMP
  sched, perf: MAINTAINERS update, add submaintainers and reviewers
  sched/fair: Use rq_lock/unlock in online_fair_sched_group
  cpufreq: schedutil: fix equation in comment
  sched: Rework pick_next_task() slow-path
  sched: Allow put_prev_task() to drop rq->lock
  sched/fair: Expose newidle_balance()
  sched: Add task_struct pointer to sched_class::set_curr_task
  sched: Rework CPU hotplug task selection
  sched/{rt,deadline}: Fix set_next_task vs pick_next_task
  sched: Fix kerneldoc comment for ia64_set_curr_task
  ...
2019-09-16 17:25:49 -07:00
Denis Efremov 595a438c78 tracing: Make exported ftrace_set_clr_event non-static
The function ftrace_set_clr_event is declared static and marked
EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the
function was decided to be a part of API, this commit removes the static
attribute and adds the declaration to the header.

Link: http://lkml.kernel.org/r/20190704172110.27041-1-efremov@linux.com

Fixes: f45d1225ad ("tracing: Kernel access to Ftrace instances")
Reviewed-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-08-31 06:51:49 -04:00
Thomas Gleixner 30c937043b tracing: Use CONFIG_PREEMPTION
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by
CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same
functionality which today depends on CONFIG_PREEMPT.

Switch the conditionals in the tracer over to CONFIG_PREEMPTION.

This is the first step to make the tracer work on RT. The other small
tweaks are submitted separately.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20190726212124.409766323@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-31 19:03:35 +02:00
Cong Wang 0aeb1def44 tracing: Make trace_get_fields() global
trace_get_fields() is the only way to read tracepoint fields at
run time, as their fields are defined at compile-time with macros.
Make this function visible to all users and it will be used by
trace event injection code to calculate the size of a tracepoint
entry.
Link: http://lkml.kernel.org/r/20190525165802.25944-4-xiyou.wangcong@gmail.com

Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-16 15:14:48 -04:00
Steven Rostedt (VMware) b3015fe41d tracing: Make a separate config for trace event self tests
The trace event self tests enable loop through *all* events, enables each
one, one at a time, runs some code to trigger various events (not
necessarily the same events), and checks if anything went wrong. The issue
is that trace events are usually the least likely start up test to cause a
problem, but they take the longest to run (because there are so many
events). When one of the other tests trigger a bug, the trace event start up
tests causes the bisect to take much longer, because it takes 10s of seconds
to get through the trace event tests.

By making them a separate config (even though they are enabled by default if
start up tests are set), it is possible to turn them off and still run the
other tracing start up tests much quicker.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-25 23:04:43 -04:00
Elazar Leibovich cbe08bcbbe tracing: Fix partial reading of trace event's id file
When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.

Reading a single byte, and then the next byte would result EOF.

While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399

This code was mentioned as problematic in
commit cd458ba9d5
("tracing: Do not (ab)use trace_seq in event_id_read()")

An example C code that show this bug is:

  #include <stdio.h>
  #include <stdint.h>

  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <unistd.h>

  int main(int argc, char **argv) {
    if (argc < 2)
      return 1;
    int fd = open(argv[1], O_RDONLY);
    char c;
    read(fd, &c, 1);
    printf("First  %c\n", c);
    read(fd, &c, 1);
    printf("Second %c\n", c);
  }

Then run with, e.g.

  sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id

You'll notice you're getting the first character twice, instead of the
first two characters in the id file.

Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com

Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 23725aeeab ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-08 12:15:12 -04:00
Divya Indi f45d1225ad tracing: Kernel access to Ftrace instances
Ftrace provides the feature “instances” that provides the capability to
create multiple Ftrace ring buffers. However, currently these buffers
are created/accessed via userspace only. The kernel APIs providing these
features are not exported, hence cannot be used by other kernel
components.

This patch aims to extend this infrastructure to provide the
flexibility to create/log/remove/ enable-disable existing trace events
to these buffers from within the kernel.

Link: http://lkml.kernel.org/r/1553106531-3281-2-git-send-email-divya.indi@oracle.com

Signed-off-by: Divya Indi <divya.indi@oracle.com>
Reviewed-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-02 18:24:06 -04:00
Steven Rostedt (VMware) b6b2735514 tracing: Use str_has_prefix() instead of using fixed sizes
There are several instances of strncmp(str, "const", 123), where 123 is the
strlen of the const string to check if "const" is the prefix of str. But
this can be error prone. Use str_has_prefix() instead.

Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-22 22:51:54 -05:00
Steven Rostedt (VMware) 7e1413edd6 tracing: Consolidate trace_add/remove_event_call back to the nolock functions
The trace_add/remove_event_call_nolock() functions were added to allow
the tace_add/remove_event_call() code be called when the event_mutex
lock was already taken. Now that all callers are done within the
event_mutex, there's no reason to have two different interfaces.

Remove the current wrapper trace_add/remove_event_call()s and rename the
_nolock versions back to the original names.

Link: http://lkml.kernel.org/r/154140866955.17322.2081425494660638846.stgit@devbox

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-10 12:22:10 -05:00
Masami Hiramatsu fc800a10be tracing: Lock event_mutex before synth_event_mutex
synthetic event is using synth_event_mutex for protecting
synth_event_list, and event_trigger_write() path acquires
locks as below order.

event_trigger_write(event_mutex)
  ->trigger_process_regex(trigger_cmd_mutex)
    ->event_hist_trigger_func(synth_event_mutex)

On the other hand, synthetic event creation and deletion paths
call trace_add_event_call() and trace_remove_event_call()
which acquires event_mutex. In that case, if we keep the
synth_event_mutex locked while registering/unregistering synthetic
events, its dependency will be inversed.

To avoid this issue, current synthetic event is using a 2 phase
process to create/delete events. For example, it searches existing
events under synth_event_mutex to check for event-name conflicts, and
unlocks synth_event_mutex, then registers a new event under event_mutex
locked. Finally, it locks synth_event_mutex and tries to add the
new event to the list. But it can introduce complexity and a chance
for name conflicts.

To solve this simpler, this introduces trace_add_event_call_nolock()
and trace_remove_event_call_nolock() which don't acquire
event_mutex inside. synthetic event can lock event_mutex before
synth_event_mutex to solve the lock dependency issue simpler.

Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox

Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-12-08 20:54:09 -05:00
Steven Rostedt (VMware) bcea3f96e1 tracing: Add SPDX License format tags to tracing files
Add the SPDX License header to ease license compliance management.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-16 19:08:06 -04:00
Steven Rostedt (VMware) e0a568dcd1 tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
Now that some trace events can be protected by srcu_read_lock(tracepoint_srcu),
we need to make sure all locations that depend on this are also protected.
There were many places that did a synchronize_sched() thinking that it was
enough to protect againts access to trace events. This use to be the case,
but now that we use SRCU for _rcuidle() trace events, they may not be
protected by synchronize_sched(), as they may be called in paths that RCU is
not watching for preempt disable.

Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-10 15:12:01 -04:00
Joel Fernandes (Google) da25a672cf trace: Use rcu_dereference_raw for hooks from trace-event subsystem
Since we switched to using SRCU for tracepoints used in the idle path,
we can no longer use rcu_dereference_sched for dereferencing points in
trace-event hooks.

Since tracepoints can now use either SRCU or sched-RCU, just use
rcu_dereference_raw for traceevents just like we're doing when
dereferencing the tracepoint table.

This prevents an RCU warning reported by Masami:

[  282.060593] WARNING: can't dereference registers at 00000000f3c7f62b
[  282.063200] =============================
[  282.064082] WARNING: suspicious RCU usage
[  282.064963] 4.18.0-rc6+ #15 Tainted: G        W
[  282.066048] -----------------------------
[  282.066923] /home/mhiramat/ksrc/linux/kernel/trace/trace_events.c:242
				suspicious rcu_dereference_check() usage!
[  282.068974]
[  282.068974] other info that might help us debug this:
[  282.068974]
[  282.070770]
[  282.070770] RCU used illegally from idle CPU!
[  282.070770] rcu_scheduler_active = 2, debug_locks = 1
[  282.072938] RCU used illegally from extended quiescent state!
[  282.074183] no locks held by swapper/0/0.
[  282.075071]
[  282.075071] stack backtrace:
[  282.076121] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W
[  282.077782] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[  282.079604] Call Trace:
[  282.080212]  <IRQ>
[  282.080755]  dump_stack+0x85/0xcb
[  282.081523]  trace_event_ignore_this_pid+0x66/0x70
[  282.082541]  trace_event_raw_event_preemptirq_template+0xa2/0xb0
[  282.083774]  ? interrupt_entry+0xc4/0xe0
[  282.084665]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[  282.085669]  trace_hardirqs_off_caller+0x90/0xd0
[  282.086597]  trace_hardirqs_off_thunk+0x1a/0x1c
[  282.087433]  ? call_function_interrupt+0xa/0x20
[  282.088201]  interrupt_entry+0xc4/0xe0
[  282.088848]  ? call_function_interrupt+0xa/0x20
[  282.089579]  </IRQ>
[  282.090029]  ? native_safe_halt+0x2/0x10
[  282.090695]  ? default_idle+0x1f/0x160
[  282.091330]  ? default_idle_call+0x24/0x40
[  282.091997]  ? do_idle+0x210/0x250
[  282.092658]  ? cpu_startup_entry+0x6f/0x80
[  282.093338]  ? start_kernel+0x49d/0x4bd
[  282.093987]  ? secondary_startup_64+0xa5/0xb0

Link: http://lkml.kernel.org/r/20180803023407.225852-1-joel@joelfernandes.org

Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-08-03 09:38:39 -04:00
Steven Rostedt (VMware) 5d948c86bb tracing: Do not show filter file for ftrace internal events
The filter file in the ftrace internal events, like in
/sys/kernel/tracing/events/ftrace/function/filter is not attached to any
functionality. Do not create them as they are meaningless.

In the future, if an ftrace internal event gets filter functionality, then
it will need to create it directly.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-05-29 08:28:46 -04:00
Steven Rostedt (VMware) 58b9254757 tracing: Have event_trace_init() called by trace_init_tracefs()
Instead of having both trace_init_tracefs() and event_trace_init() be called
by fs_initcall() routines, have event_trace_init() called directly by
trace_init_tracefs(). This will guarantee order of how the events are
created with respect to the rest of the ftrace infrastructure. This is
needed to be able to assoctiate event files with ftrace internal events,
such as the trace_marker.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-05-29 08:28:29 -04:00
Steven Rostedt (VMware) 3c96529c07 tracing: Add __find_event_file() to find event files without restrictions
By adding the function __find_event_file() that can search for files without
restrictions, such as if the event associated with the file has a reg
function, or if it has the "ignore" flag set, the files that are associated
to ftrace internal events (like trace_marker and function events) can be
found and used.

find_event_file() still returns a "filtered" file, as most callers need a
valid trace event file. One created by the trace_events.h macros and not one
created for parsing ftrace specific events.

Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-05-29 08:28:18 -04:00
Changbin Du f4d0706cde tracing: Make sure the parsed string always terminates with '\0'
Always mark the parsed string with a terminated nul '\0' character. This removes
the need for the users to have to append the '\0' before using the parsed string.

Link: http://lkml.kernel.org/r/1516093350-12045-4-git-send-email-changbin.du@intel.com

Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-23 15:57:28 -05:00
Steven Rostedt (VMware) 1ebe1eaf2f tracing: Fix converting enum's from the map in trace_event_eval_update()
Since enums do not get converted by the TRACE_EVENT macro into their values,
the event format displaces the enum name and not the value. This breaks
tools like perf and trace-cmd that need to interpret the raw binary data. To
solve this, an enum map was created to convert these enums into their actual
numbers on boot up. This is done by TRACE_EVENTS() adding a
TRACE_DEFINE_ENUM() macro.

Some enums were not being converted. This was caused by an optization that
had a bug in it.

All calls get checked against this enum map to see if it should be converted
or not, and it compares the call's system to the system that the enum map
was created under. If they match, then they call is processed.

To cut down on the number of iterations needed to find the maps with a
matching system, since calls and maps are grouped by system, when a match is
made, the index into the map array is saved, so that the next call, if it
belongs to the same system as the previous call, could start right at that
array index and not have to scan all the previous arrays.

The problem was, the saved index was used as the variable to know if this is
a call in a new system or not. If the index was zero, it was assumed that
the call is in a new system and would keep incrementing the saved index
until it found a matching system. The issue arises when the first matching
system was at index zero. The next map, if it belonged to the same system,
would then think it was the first match and increment the index to one. If
the next call belong to the same system, it would begin its search of the
maps off by one, and miss the first enum that should be converted. This left
a single enum not converted properly.

Also add a comment to describe exactly what that index was for. It took me a
bit too long to figure out what I was thinking when debugging this issue.

Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com

Cc: stable@vger.kernel.org
Fixes: 0c564a538a ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Teste-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-01-18 15:53:10 -05:00
Steven Rostedt (VMware) 12ecef0cb1 tracing: Reverse the order of trace_types_lock and event_mutex
In order to make future changes where we need to call
tracing_set_clock() from within an event command, the order of
trace_types_lock and event_mutex must be reversed, as the event command
will hold event_mutex and the trace_types_lock is taken from within
tracing_set_clock().

Link: http://lkml.kernel.org/r/20170921162249.0dde3dca@gandalf.local.home

Requested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-10-04 11:36:56 -04:00
Chunyu Hu 7685ab6c58 tracing: Fix clear of RECORDED_TGID flag when disabling trace event
When disabling one trace event, the RECORDED_TGID flag in the event
file is not correctly cleared. It's clearing RECORDED_CMD flag when
it should clear RECORDED_TGID flag.

Link: http://lkml.kernel.org/r/1504589806-8425-1-git-send-email-chuhu@redhat.com

Cc: Joel Fernandes <joelaf@google.com>
Cc: stable@vger.kernel.org
Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-09-05 12:00:09 -04:00
Steven Rostedt (VMware) 065e63f951 tracing: Only have rmmod clear buffers that its events were active in
Currently, when a module event is enabled, when that module is removed, it
clears all ring buffers. This is to prevent another module from being loaded
and having one of its trace event IDs from reusing a trace event ID of the
removed module. This could cause undesirable effects as the trace event of
the new module would be using its own processing algorithms to process raw
data of another event. To prevent this, when a module is loaded, if any of
its events have been used (signified by the WAS_ENABLED event call flag,
which is never cleared), all ring buffers are cleared, just in case any one
of them contains event data of the removed event.

The problem is, there's no reason to clear all ring buffers if only one (or
less than all of them) uses one of the events. Instead, only clear the ring
buffers that recorded the events of a module that is being removed.

To do this, instead of keeping the WAS_ENABLED flag with the trace event
call, move it to the per instance (per ring buffer) event file descriptor.
The event file descriptor maps each event to a separate ring buffer
instance. Then when the module is removed, only the ring buffers that
activated one of the module's events get cleared. The rest are not touched.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-08-31 17:47:38 -04:00
Joel Fernandes d914ba37d7 tracing: Add support for recording tgid of tasks
Inorder to support recording of tgid, the following changes are made:

* Introduce a new API (tracing_record_taskinfo) to additionally record the tgid
  along with the task's comm at the same time. This has has the benefit of not
  setting trace_cmdline_save before all the information for a task is saved.
* Add a new API tracing_record_taskinfo_sched_switch to record task information
  for 2 tasks at a time (previous and next) and use it from sched_switch probe.
* Preserve the old API (tracing_record_cmdline) and create it as a wrapper
  around the new one so that existing callers aren't affected.
* Reuse the existing sched_switch and sched_wakeup probes to record tgid
  information and add a new option 'record-tgid' to enable recording of tgid

When record-tgid option isn't enabled to being with, we take care to make sure
that there's isn't memory or runtime overhead.

Link: http://lkml.kernel.org/r/20170627020155.5139-1-joelaf@google.com

Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Tested-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-06-27 13:30:28 -04:00
Jeremy Linton 67ec0d8595 tracing: Rename enum_replace to eval_replace
The enum_replace stanza works as is for sizeof()
calls as well as enums. Rename it as well.

Link: http://lkml.kernel.org/r/20170531215653.3240-9-jeremy.linton@arm.com

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-06-13 17:10:34 -04:00
Jeremy Linton f57a41434f trace: rename enum_map functions
Rename the core trace enum routines to use eval, to
reflect their use by more than just enum to value mapping.

Link: http://lkml.kernel.org/r/20170531215653.3240-8-jeremy.linton@arm.com

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-06-13 17:10:23 -04:00
Jeremy Linton 00f4b652b6 trace: rename trace_enum_map to trace_eval_map
Each enum is loaded into the trace_enum_map, as we
are now using this for more than enums rename it.

Link: http://lkml.kernel.org/r/20170531215653.3240-3-jeremy.linton@arm.com

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-06-13 17:08:57 -04:00
Steven Rostedt (VMware) 6e4443199e tracing/ftrace: Add a better way to pass data via the probe functions
With the redesign of the registration and execution of the function probes
(triggers), data can now be passed from the setup of the probe to the probe
callers that are specific to the trace_array it is on. Although, all probes
still only affect the toplevel trace array, this change will allow for
instances to have their own probes separated from other instances and the
top array.

That is, something like the stacktrace probe can be set to trace only in an
instance and not the toplevel trace array. This isn't implement yet, but
this change sets the ground work for the change.

When a probe callback is triggered (someone writes the probe format into
set_ftrace_filter), it calls register_ftrace_function_probe() passing in
init_data that will be used to initialize the probe. Then for every matching
function, register_ftrace_function_probe() will call the probe_ops->init()
function with the init data that was passed to it, as well as an address to
a place holder that is associated with the probe and the instance. The first
occurrence will have a NULL in the pointer. The init() function will then
initialize it. If other probes are added, or more functions are part of the
probe, the place holder will be passed to the init() function with the place
holder data that it was initialized to the last time.

Then this place_holder is passed to each of the other probe_ops functions,
where it can be used in the function callback. When the probe_ops free()
function is called, it can be called either with the rip of the function
that is being removed from the probe, or zero, indicating that there are no
more functions attached to the probe, and the place holder is about to be
freed. This gives the probe_ops a way to free the data it assigned to the
place holder if it was allocade during the first init call.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:46 -04:00
Steven Rostedt (VMware) 7b60f3d876 ftrace: Dynamically create the probe ftrace_ops for the trace_array
In order to eventually have each trace_array instance have its own unique
set of function probes (triggers), the trace array needs to hold the ops and
the filters for the probes.

This is the first step to accomplish this. Instead of having the private
data of the probe ops point to the trace_array, create a separate list that
the trace_array holds. There's only one private_data for a probe, we need
one per trace_array. The probe ftrace_ops will be dynamically created for
each instance, instead of being static.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:46 -04:00
Steven Rostedt (VMware) b5f081b563 tracing: Pass the trace_array into ftrace_probe_ops functions
Pass the trace_array associated to a ftrace_probe_ops into the probe_ops
func(), init() and free() functions. The trace_array is the descriptor that
describes a tracing instance. This will help create the infrastructure that
will allow having function probes unique to tracing instances.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:45 -04:00
Steven Rostedt (VMware) 04ec7bb642 tracing: Have the trace_array hold the list of registered func probes
Add a link list to the trace_array to hold func probes that are registered.
Currently, all function probes are the same for all instances as it was
before, that is, only the top level trace_array holds the function probes.
But this lays the ground work to have function probes be attached to
individual instances, and having the event trigger only affect events in the
given instance. But that work is still to be done.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:45 -04:00
Steven Rostedt (VMware) d3d532d798 ftrace: Have unregister_ftrace_function_probe_func() return a value
Currently unregister_ftrace_function_probe_func() is a void function. It
does not give any feedback if an error occurred or no item was found to
remove and nothing was done.

Change it to return status and success if it removed something. Also update
the callers to return that feedback to the user.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:42 -04:00
Steven Rostedt (VMware) 1a48df0041 ftrace: Remove data field from ftrace_func_probe structure
No users of the function probes uses the data field anymore. Remove it, and
change the init function to take a void *data parameter instead of a
void **data, because the init will just get the data that the registering
function was received, and there's no state after it is called.

The other functions for ftrace_probe_ops still take the data parameter, but
it will currently only be passed NULL. It will stay as a parameter for
future data to be passed to these functions.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:41 -04:00
Steven Rostedt (VMware) 41794f1907 ftrace: Added ftrace_func_mapper for function probe triggers
In order to move the ops to the function probes directly, they need a way to
map function ips to their own data without depending on the infrastructure
of the function probes, as the data field will be going away.

New helper functions are added that are based on the ftrace_hash code.
ftrace_func_mapper functions are there to let the probes map ips to their
data. These can be allocated by the probe ops, and referenced in the
function callbacks.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:37 -04:00
Steven Rostedt (VMware) bca6c8d048 ftrace: Pass probe ops to probe function
In preparation to cleaning up the probe function registration code, the
"data" parameter will eventually be removed from the probe->func() call.
Instead it will receive its own "ops" function, in which it can set up its
own data that it needs to map.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-20 22:06:37 -04:00
Steven Rostedt (Red Hat) 989a0a3d24 tracing: Have system enable return error if one of the events fail
If one of the events within a system fails to enable when "1" is written
to the system "enable" file, it should return an error. Note, some events
may still be enabled, but the user should know that something did go wrong.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-12-09 09:15:41 -05:00
Steven Rostedt (Red Hat) 4239174570 tracing: Make tracepoint_printk a static_key
Currently, when tracepoint_printk is set (enabled by the "tp_printk" kernel
command line), it causes trace events to print via printk(). This is a very
dangerous operation, but is useful for debugging.

The issue is, it's seldom used, but it is always checked even if it's not
enabled by the kernel command line. Instead of having this feature called by
a branch against a variable, turn that variable into a static key, and this
will remove the test and jump.

To simplify things, the functions output_printk() and
trace_event_buffer_commit() were moved from trace_events.c to trace.c.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-23 15:52:45 -05:00
Steven Rostedt (Red Hat) 7d43640022 tracing: Add error checks to creation of event files
The creation of the set_event_pid file was assigned to a variable "entry"
but that variable was never used. Ideally, it should be used to check if the
file was created and warn if it was not.

The files header_page, header_event should also be checked and a warning if
they fail to be created.

The "enable" file was moved up, as it is a more crucial file to have and a
hard failure (return -ENOMEM) should be returned if it is not created.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22 18:32:03 -05:00
Steven Rostedt (Red Hat) e947841c0d tracing: Show the preempt count of when the event was called
Because tracepoint callbacks are done with preemption enabled, the trace
events are always called with preempt disable due to the
rcu_read_lock_sched_notrace() in __DO_TRACE(). This causes the preempt count
shown in the recorded trace event to be inaccurate. It is always one more
that what the preempt_count was when the tracepoint was called.

If CONFIG_PREEMPT is enabled, subtract 1 from the preempt_count before
recording it in the trace buffer.

Link: http://lkml.kernel.org/r/20160525132537.GA10808@linutronix.de

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:54:21 -04:00
Steven Rostedt (Red Hat) 76c813e266 tracing: Move pid_list write processing into its own function
The addition of PIDs into a pid_list via the write operation of
set_event_pid is a bit complex. The same operation will be needed for
function tracing pids. Move the code into its own generic function in
trace.c, so that we can avoid duplication of this code.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:54:18 -04:00
Steven Rostedt (Red Hat) 5cc8976bd5 tracing: Move the pid_list seq_file functions to be global
To allow other aspects of ftrace to use the pid_list logic, we need to reuse
the seq_file functions. Making the generic part into functions that can be
called by other files will help in this regard.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:54:17 -04:00
Steven Rostedt d8275c454d tracing: Move filtered_pid helper functions into trace.c
As the filtered_pid functions are going to be used by function tracer as
well as trace_events, move the code into the generic trace.c file.

The functions moved are:

 trace_find_filtered_pid()
 trace_ignore_this_task()
 trace_filter_add_remove_task()

Kernel Doc text was also added.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:54:17 -04:00
Steven Rostedt 4e267db135 tracing: Make the pid filtering helper functions global
Make the functions used for pid filtering global for tracing, such that the
function tracer can use the pid code as well.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-06-20 09:54:16 -04:00
Linus Torvalds 2600a46ee0 This includes two new updates for the ftrace infrastructure.
1) With the changing of the code for filtering events by pid, from
   a list of pids to a bitmask, we can now easily implement following
   forks. With a new tracing option "event-fork" which, when set, will
   have tasks with pids in set_event_pid, when they fork, to have their
   child pids added to set_event_pid and the child will be traced as well.
 
   Note, if "event-fork" is set and a task with its pid in set_event_pid
   exits, its pid will be removed from set_event_pid
 
 2) The addition of Tom Zanussi's hist triggers. This includes a very
    thorough documentatino on how to use the hist triggers with events.
    This introduces a quick and easy way to get histogram data from
    events and their fields.
 
 Some other cleanups and updates were added as well. Like Masami Hiramatsu
 added test cases for the event trigger and hist triggers. Also I added
 a speed up of filtering by using a temp buffer when filters are set.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXPIv1AAoJEKKk/i67LK/8WZcIAIaaHJMctDCfXPg8OoT1LLI/
 yUxgWvQRM7iwGV8YjuaXlyxTDJU0XVoNpPF5ZGiePlRDSCUboNvgcNVHRusJJKqM
 oV1BTsq2x5eY12agA8kSOHcqGP7saqa2H+RJ4+3jNB/DTtOwJ8RzodlqWQ7PZbRG
 0IDvD7buh9NeDS2am835RB+Xhy/jNBrkoJjpvMNaG5nZypsMq8D524RzyBm6RYjp
 p+KLo3/yDc0+khv1hIs1c/w+LXNs7XtpPjpAKBa8B4xOiXndh3IosjX3JnL+0f+6
 EvXt6qRfBKCE5o2BM397qjE3V/L0/SfzTijuL1WMd88ZvPGqwcsslQekmxKAb1E=
 =WBTB
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This includes two new updates for the ftrace infrastructure.

   - With the changing of the code for filtering events by pid, from a
     list of pids to a bitmask, we can now easily implement following
     forks.  With a new tracing option "event-fork" which, when set,
     will have tasks with pids in set_event_pid, when they fork, to have
     their child pids added to set_event_pid and the child will be
     traced as well.

     Note, if "event-fork" is set and a task with its pid in
     set_event_pid exits, its pid will be removed from set_event_pid

   - The addition of Tom Zanussi's hist triggers.  This includes a very
     thorough documentatino on how to use the hist triggers with events.
     This introduces a quick and easy way to get histogram data from
     events and their fields.

  Some other cleanups and updates were added as well.  Like Masami
  Hiramatsu added test cases for the event trigger and hist triggers.
  Also I added a speed up of filtering by using a temp buffer when
  filters are set"

* tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Use temp buffer when filtering events
  tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER logic
  tracing: Remove unused function trace_current_buffer_lock_reserve()
  tracing: Remove one use of trace_current_buffer_lock_reserve()
  tracing: Have trace_buffer_unlock_commit() call the _regs version with NULL
  tracing: Remove unused function trace_current_buffer_discard_commit()
  tracing: Move trace_buffer_unlock_commit{_regs}() to local header
  tracing: Fold filter_check_discard() into its only user
  tracing: Make filter_check_discard() local
  tracing: Move event_trigger_unlock_commit{_regs}() to local header
  tracing: Don't use the address of the buffer array name in copy_from_user
  tracing: Handle tracing_map_alloc_elts() error path correctly
  tracing: Add check for NULL event field when creating hist field
  tracing: checking for NULL instead of IS_ERR()
  tracing: Do not inherit event-fork option for instances
  tracing: Fix unsigned comparison to zero in hist trigger code
  kselftests/ftrace: Add a test for log2 modifier of hist trigger
  tracing: Add hist trigger 'log2' modifier
  kselftests/ftrace: Add hist trigger testcases
  kselftests/ftrace : Add event trigger testcases
  ...
2016-05-18 18:55:19 -07:00
David S. Miller e800072c18 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
In netdevice.h we removed the structure in net-next that is being
changes in 'net'.  In macsec.c and rtnetlink.c we have overlaps
between fixes in 'net' and the u64 attribute changes in 'net-next'.

The mlx5 conflicts have to do with vxlan support dependencies.

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09 15:59:24 -04:00
Steven Rostedt (Red Hat) 0fc1b09ff1 tracing: Use temp buffer when filtering events
Filtering of events requires the data to be written to the ring buffer
before it can be decided to filter or not. This is because the parameters of
the filter are based on the result that is written to the ring buffer and
not on the parameters that are passed into the trace functions.

The ftrace ring buffer is optimized for writing into the ring buffer and
committing. The discard procedure used when filtering decides the event
should be discarded is much more heavy weight. Thus, using a temporary
filter when filtering events can speed things up drastically.

Without a temp buffer we have:

 # trace-cmd start -p nop
 # perf stat -r 10 hackbench 50
       0.790706626 seconds time elapsed ( +-  0.71% )

 # trace-cmd start -e all
 # perf stat -r 10 hackbench 50
       1.566904059 seconds time elapsed ( +-  0.27% )

 # trace-cmd start -e all -f 'common_preempt_count==20'
 # perf stat -r 10 hackbench 50
       1.690598511 seconds time elapsed ( +-  0.19% )

 # trace-cmd start -e all -f 'common_preempt_count!=20'
 # perf stat -r 10 hackbench 50
       1.707486364 seconds time elapsed ( +-  0.30% )

The first run above is without any tracing, just to get a based figure.
hackbench takes ~0.79 seconds to run on the system.

The second run enables tracing all events where nothing is filtered. This
increases the time by 100% and hackbench takes 1.57 seconds to run.

The third run filters all events where the preempt count will equal "20"
(this should never happen) thus all events are discarded. This takes 1.69
seconds to run. This is 10% slower than just committing the events!

The last run enables all events and filters where the filter will commit all
events, and this takes 1.70 seconds to run. The filtering overhead is
approximately 10%. Thus, the discard and commit of an event from the ring
buffer may be about the same time.

With this patch, the numbers change:

 # trace-cmd start -p nop
 # perf stat -r 10 hackbench 50
       0.778233033 seconds time elapsed ( +-  0.38% )

 # trace-cmd start -e all
 # perf stat -r 10 hackbench 50
       1.582102692 seconds time elapsed ( +-  0.28% )

 # trace-cmd start -e all -f 'common_preempt_count==20'
 # perf stat -r 10 hackbench 50
       1.309230710 seconds time elapsed ( +-  0.22% )

 # trace-cmd start -e all -f 'common_preempt_count!=20'
 # perf stat -r 10 hackbench 50
       1.786001924 seconds time elapsed ( +-  0.20% )

The first run is again the base with no tracing.

The second run is all tracing with no filtering. It is a little slower, but
that may be well within the noise.

The third run shows that discarding all events only took 1.3 seconds. This
is a speed up of 23%! The discard is much faster than even the commit.

The one downside is shown in the last run. Events that are not discarded by
the filter will take longer to add, this is due to the extra copy of the
event.

Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-03 17:59:24 -04:00
Chunyu Hu 854145e0a8 tracing: Don't display trigger file for events that can't be enabled
Currently register functions for events will be called
through the 'reg' field of event class directly without
any check when seting up triggers.

Triggers for events that don't support register through
debug fs (events under events/ftrace are for trace-cmd to
read event format, and most of them don't have a register
function except events/ftrace/functionx) can't be enabled
at all, and an oops will be hit when setting up trigger
for those events, so just not creating them is an easy way
to avoid the oops.

Link: http://lkml.kernel.org/r/1462275274-3911-1-git-send-email-chuhu@redhat.com

Cc: stable@vger.kernel.org # 3.14+
Fixes: 85f2b08268 ("tracing: Add basic event trigger framework")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-05-03 12:59:30 -04:00
Steven Rostedt (Red Hat) 9b9db27505 tracing: Remove one use of trace_current_buffer_lock_reserve()
The only user of trace_current_buffer_lock_reserve() is in the boot up self
tests. Restructure the code a little to have that code use what everything
else uses: trace_event_buffer_lock_reserve().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-29 18:10:21 -04:00
Tom Zanussi 7ef224d1d0 tracing: Add 'hist' event trigger command
'hist' triggers allow users to continually aggregate trace events,
which can then be viewed afterwards by simply reading a 'hist' file
containing the aggregation in a human-readable format.

The basic idea is very simple and boils down to a mechanism whereby
trace events, rather than being exhaustively dumped in raw form and
viewed directly, are automatically 'compressed' into meaningful tables
completely defined by the user.

This is done strictly via single-line command-line commands and
without the aid of any kind of programming language or interpreter.

A surprising number of typical use cases can be accomplished by users
via this simple mechanism.  In fact, a large number of the tasks that
users typically do using the more complicated script-based tracing
tools, at least during the initial stages of an investigation, can be
accomplished by simply specifying a set of keys and values to be used
in the creation of a hash table.

The Linux kernel trace event subsystem happens to provide an extensive
list of keys and values ready-made for such a purpose in the form of
the event format files associated with each trace event.  By simply
consulting the format file for field names of interest and by plugging
them into the hist trigger command, users can create an endless number
of useful aggregations to help with investigating various properties
of the system.  See Documentation/trace/events.txt for examples.

hist triggers are implemented on top of the existing event trigger
infrastructure, and as such are consistent with the existing triggers
from a user's perspective as well.

The basic syntax follows the existing trigger syntax.  Users start an
aggregation by writing a 'hist' trigger to the event of interest's
trigger file:

  # echo hist:keys=xxx [ if filter] > event/trigger

Once a hist trigger has been set up, by default it continually
aggregates every matching event into a hash table using the event key
and a value field named 'hitcount'.

To view the aggregation at any point in time, simply read the 'hist'
file in the same directory as the 'trigger' file:

  # cat event/hist

The detailed syntax provides additional options for user control, and
is described exhaustively in Documentation/trace/events.txt and in the
virtual tracing/README file in the tracing subsystem.

Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-04-19 12:16:14 -04:00