Commit Graph

2280 Commits

Author SHA1 Message Date
Christoph Hellwig 2cada584b2 block: cleanup error handling in sg_io
Make sure we always clean up through the out label and just have
a single place to put the request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:42:01 -05:00
Tejun Heo cddd5d1764 blk-mq: blk_mq_freeze_queue() should allow nesting
While converting to percpu_ref for freezing, add703fda9 ("blk-mq:
use percpu_ref for mq usage count") incorrectly made
blk_mq_freeze_queue() misbehave when freezing is nested due to
percpu_ref_kill() being invoked on an already killed ref.

Fix it by making blk_mq_freeze_queue() kill and kick the queue only
for the outermost freeze attempt.  All the nested ones can simply wait
for the ref to reach zero.

While at it, remove unnecessary @wake initialization from
blk_mq_unfreeze_queue().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:37:51 -05:00
Jens Axboe a68aafa5b2 blk-mq: correct a few wrong/bad comments
Just grammar or spelling errors, nothing major.

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:37:49 -05:00
Sagi Grimberg 16f408dc6b block: Fix BUG_ON when pi errors occur
When getting a pi error we get to bio_integrity_end_io with
bi_remaining already decremented to 0 where we will eventually
need to call bio_endio with restored original bio completion handler.
Calling bio_endio invokes a BUG_ON(). We should call bio_endio_nodec
instead, like what is done in bio_integrity_verify_fn.

Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:37:47 -05:00
Jens Axboe 274a5843ff blk-mq: don't allow merges if turned off for the queue
blk-mq uses BLK_MQ_F_SHOULD_MERGE, as set by the driver at init time,
to determine whether it should merge IO or not. However, this could
also be disabled by the admin, if merging is switched off through
sysfs. So check the general queue state as well before attempting
to merge IO.

Reported-by: Rob Elliott <Elliott@hp.com>
Tested-by: Rob Elliott <Elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-21 20:37:45 -05:00
Ming Lei dd84008708 blk-mq: fix WARNING "percpu_ref_kill() called more than once!"
Before doing queue release, the queue has been freezed already
by blk_cleanup_queue(), so needn't to freeze queue for deleting
tag set.

This patch fixes the WARNING of "percpu_ref_kill() called more than once!"
which is triggered during unloading block driver.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-15 12:38:20 -06:00
Linus Torvalds ba368991f6 . Allow the thin target to paired with any size external origin; also
allow thin snapshots to be larger than the external origin.
 
 . Add support for quickly loading a repetitive pattern into the
   dm-switch target.
 
 . Use per-bio data in the dm-crypt target instead of always using a
   mempool for each allocation.  Required switching to kmalloc alignment
   for the bio slab.
 
 . Fix DM core to properly stack the QUEUE_FLAG_NO_SG_MERGE flag
 
 . Fix the dm-cache and dm-thin targets' export of the minimum_io_size to
   match the data block size -- this fixes an issue where mkfs.xfs would
   improperly infer raid striping was in place on the underlying storage.
 
 . Small cleanups in dm-io, dm-mpath and dm-cache
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJT64yEAAoJEMUj8QotnQNatjQH/2mqm8EtPuZas70zHVDzjMlE
 ZyV8xgHpU0MBmiBi+JhUBv9iKX4sVa+C25559WkKtxRVMnZmI1WDry4TagiqrhnK
 9o/uvdWigJMR+uwahwe4UErEtKscOQJD30a8taN/suJ6Z2C7XJJRUZPsyL4a3Vov
 w+UIi7aYDEGp/2VQ8mvTTxjdF5x5km4wKsjBTs03uTrrkEJ+bIUndl2I1X+X4bsw
 kiWYOQwmcnD8GwYkSrthJYLsS3Hjur/J/My7KZwXc00ANLOexqHdKfRDwH8b36+m
 olKXv3swCd8vi+jJYEYzuW9213ACsSEGP7h8NFVZ/+2FeDsSzB/C7zjW9okIUIw=
 =y/3r
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper changes from Mike Snitzer:

 - Allow the thin target to paired with any size external origin; also
   allow thin snapshots to be larger than the external origin.

 - Add support for quickly loading a repetitive pattern into the
   dm-switch target.

 - Use per-bio data in the dm-crypt target instead of always using a
   mempool for each allocation.  Required switching to kmalloc alignment
   for the bio slab.

 - Fix DM core to properly stack the QUEUE_FLAG_NO_SG_MERGE flag

 - Fix the dm-cache and dm-thin targets' export of the minimum_io_size
   to match the data block size -- this fixes an issue where mkfs.xfs
   would improperly infer raid striping was in place on the underlying
   storage.

 - Small cleanups in dm-io, dm-mpath and dm-cache

* tag 'dm-3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm table: propagate QUEUE_FLAG_NO_SG_MERGE
  dm switch: efficiently support repetitive patterns
  dm switch: factor out switch_region_table_read
  dm cache: set minimum_io_size to cache's data block size
  dm thin: set minimum_io_size to pool's data block size
  dm crypt: use per-bio data
  block: use kmalloc alignment for bio slab
  dm table: make dm_table_supports_discards static
  dm cache metadata: use dm-space-map-metadata.h defined size limits
  dm cache: fail migrations in the do_worker error path
  dm cache: simplify deferred set reference count increments
  dm thin: relax external origin size constraints
  dm thin: switch to an atomic_t for tracking pending new block preparations
  dm mpath: eliminate pg_ready() wrapper
  dm io: simplify dec_count and sync_io
2014-08-14 09:17:56 -06:00
Linus Torvalds d429a3639c Merge branch 'for-3.17/drivers' of git://git.kernel.dk/linux-block
Pull block driver changes from Jens Axboe:
 "Nothing out of the ordinary here, this pull request contains:

   - A big round of fixes for bcache from Kent Overstreet, Slava Pestov,
     and Surbhi Palande.  No new features, just a lot of fixes.

   - The usual round of drbd updates from Andreas Gruenbacher, Lars
     Ellenberg, and Philipp Reisner.

   - virtio_blk was converted to blk-mq back in 3.13, but now Ming Lei
     has taken it one step further and added support for actually using
     more than one queue.

   - Addition of an explicit SG_FLAG_Q_AT_HEAD for block/bsg, to
     compliment the the default behavior of adding to the tail of the
     queue.  From Douglas Gilbert"

* 'for-3.17/drivers' of git://git.kernel.dk/linux-block: (86 commits)
  bcache: Drop unneeded blk_sync_queue() calls
  bcache: add mutex lock for bch_is_open
  bcache: Correct printing of btree_gc_max_duration_ms
  bcache: try to set b->parent properly
  bcache: fix memory corruption in init error path
  bcache: fix crash with incomplete cache set
  bcache: Fix more early shutdown bugs
  bcache: fix use-after-free in btree_gc_coalesce()
  bcache: Fix an infinite loop in journal replay
  bcache: fix crash in bcache_btree_node_alloc_fail tracepoint
  bcache: bcache_write tracepoint was crashing
  bcache: fix typo in bch_bkey_equal_header
  bcache: Allocate bounce buffers with GFP_NOWAIT
  bcache: Make sure to pass GFP_WAIT to mempool_alloc()
  bcache: fix uninterruptible sleep in writeback thread
  bcache: wait for buckets when allocating new btree root
  bcache: fix crash on shutdown in passthrough mode
  bcache: fix lockdep warnings on shutdown
  bcache allocator: send discards with correct size
  bcache: Fix to remove the rcu_sched stalls.
  ...
2014-08-14 09:10:21 -06:00
Linus Torvalds 4a319a490c Merge branch 'for-3.17/core' of git://git.kernel.dk/linux-block
Pull block core bits from Jens Axboe:
 "Small round this time, after the massive blk-mq dump for 3.16.  This
  pull request contains:

   - Fixes for max_sectors overflow in ioctls from Akinoby Mita.

   - Partition off-by-one bug fix in aix partitions from Dan Carpenter.

   - Various small partition cleanups from Fabian Frederick.

   - Fix for the block integrity code sometimes returning the wrong
     vector count from Gu Zheng.

   - Cleanup an re-org of the blk-mq queue enter/exit percpu counters
     from Tejun.  Dependent on the percpu pull for 3.17 (which was in
     the block tree too), that you have already pulled in.

   - A blkcg oops fix, also from Tejun"

* 'for-3.17/core' of git://git.kernel.dk/linux-block:
  partitions: aix.c: off by one bug
  blkcg: don't call into policy draining if root_blkg is already gone
  Revert "bio: modify __bio_add_page() to accept pages that don't start a new segment"
  bio: modify __bio_add_page() to accept pages that don't start a new segment
  block: fix SG_[GS]ET_RESERVED_SIZE ioctl when max_sectors is huge
  block: fix BLKSECTGET ioctl when max_sectors is greater than USHRT_MAX
  block/partitions/efi.c: kerneldoc fixing
  block/partitions/msdos.c: code clean-up
  block/partitions/amiga.c: replace nolevel printk by pr_err
  block/partitions/aix.c: replace count*size kzalloc by kcalloc
  bio-integrity: add "bip_max_vcnt" into struct bio_integrity_payload
  blk-mq: use percpu_ref for mq usage count
  blk-mq: collapse __blk_mq_drain_queue() into blk_mq_freeze_queue()
  blk-mq: decouble blk-mq freezing from generic bypassing
  block, blk-mq: draining can't be skipped even if bypass_depth was non-zero
  blk-mq: fix a memory ordering bug in blk_mq_queue_enter()
2014-08-14 09:07:02 -06:00
Dan Carpenter d97a86c170 partitions: aix.c: off by one bug
The lvip[] array has "state->limit" elements so the condition here
should be >= instead of >.

Fixes: 6ceea22bbb ('partitions: add aix lvm partition support files')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-05 13:13:24 -06:00
Linus Torvalds 47dfe4037e Merge branch 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup changes from Tejun Heo:
 "Mostly changes to get the v2 interface ready.  The core features are
  mostly ready now and I think it's reasonable to expect to drop the
  devel mask in one or two devel cycles at least for a subset of
  controllers.

   - cgroup added a controller dependency mechanism so that block cgroup
     can depend on memory cgroup.  This will be used to finally support
     IO provisioning on the writeback traffic, which is currently being
     implemented.

   - The v2 interface now uses a separate table so that the interface
     files for the new interface are explicitly declared in one place.
     Each controller will explicitly review and add the files for the
     new interface.

   - cpuset is getting ready for the hierarchical behavior which is in
     the similar style with other controllers so that an ancestor's
     configuration change doesn't change the descendants' configurations
     irreversibly and processes aren't silently migrated when a CPU or
     node goes down.

  All the changes are to the new interface and no behavior changed for
  the multiple hierarchies"

* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (29 commits)
  cpuset: fix the WARN_ON() in update_nodemasks_hier()
  cgroup: initialize cgrp_dfl_root_inhibit_ss_mask from !->dfl_files test
  cgroup: make CFTYPE_ONLY_ON_DFL and CFTYPE_NO_ internal to cgroup core
  cgroup: distinguish the default and legacy hierarchies when handling cftypes
  cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
  cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
  cgroup: split cgroup_base_files[] into cgroup_{dfl|legacy}_base_files[]
  cpuset: export effective masks to userspace
  cpuset: allow writing offlined masks to cpuset.cpus/mems
  cpuset: enable onlined cpu/node in effective masks
  cpuset: refactor cpuset_hotplug_update_tasks()
  cpuset: make cs->{cpus, mems}_allowed as user-configured masks
  cpuset: apply cs->effective_{cpus,mems}
  cpuset: initialize top_cpuset's configured masks at mount
  cpuset: use effective cpumask to build sched domains
  cpuset: inherit ancestor's masks if effective_{cpus, mems} becomes empty
  cpuset: update cs->effective_{cpus, mems} when config changes
  cpuset: update cpuset->effective_{cpus,mems} at hotplug
  cpuset: add cs->effective_cpus and cs->effective_mems
  cgroup: clean up sane_behavior handling
  ...
2014-08-04 10:11:28 -07:00
Mikulas Patocka 6a24148361 block: use kmalloc alignment for bio slab
Various subsystems can ask the bio subsystem to create a bio slab cache
with some free space before the bio.  This free space can be used for any
purpose.  Device mapper uses this per-bio-data feature to place some
target-specific and device-mapper specific data before the bio, so that
the target-specific data doesn't have to be allocated separately.

This per-bio-data mechanism is used in place of kmalloc, so we need the
allocated slab to have the same memory alignment as memory allocated
with kmalloc.

Change bio_find_or_create_slab() so that it uses ARCH_KMALLOC_MINALIGN
alignment when creating the slab cache.  This is needed so that dm-crypt
can use per-bio-data for encryption - the crypto subsystem assumes this
data will have the same alignment as kmalloc'ed memory.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Jens Axboe <axboe@fb.com>
2014-08-01 12:30:34 -04:00
Tejun Heo 2a1b4cf233 blkcg: don't call into policy draining if root_blkg is already gone
While a queue is being destroyed, all the blkgs are destroyed and its
->root_blkg pointer is set to NULL.  If someone else starts to drain
while the queue is in this state, the following oops happens.

  NULL pointer dereference at 0000000000000028
  IP: [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230
  PGD e4a1067 PUD b773067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in: cfq_iosched(-) [last unloaded: cfq_iosched]
  CPU: 1 PID: 537 Comm: bash Not tainted 3.16.0-rc3-work+ #2
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  task: ffff88000e222250 ti: ffff88000efd4000 task.ti: ffff88000efd4000
  RIP: 0010:[<ffffffff8144e944>]  [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230
  RSP: 0018:ffff88000efd7bf0  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff880015091450 RCX: 0000000000000001
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffff88000efd7c10 R08: 0000000000000000 R09: 0000000000000001
  R10: ffff88000e222250 R11: 0000000000000000 R12: ffff880015091450
  R13: ffff880015092e00 R14: ffff880015091d70 R15: ffff88001508fc28
  FS:  00007f1332650740(0000) GS:ffff88001fa80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000028 CR3: 0000000009446000 CR4: 00000000000006e0
  Stack:
   ffffffff8144e8f6 ffff880015091450 0000000000000000 ffff880015091d80
   ffff88000efd7c28 ffffffff8144ae2f ffff880015091450 ffff88000efd7c58
   ffffffff81427641 ffff880015091450 ffffffff82401f00 ffff880015091450
  Call Trace:
   [<ffffffff8144ae2f>] blkcg_drain_queue+0x1f/0x60
   [<ffffffff81427641>] __blk_drain_queue+0x71/0x180
   [<ffffffff81429b3e>] blk_queue_bypass_start+0x6e/0xb0
   [<ffffffff814498b8>] blkcg_deactivate_policy+0x38/0x120
   [<ffffffff8144ec44>] blk_throtl_exit+0x34/0x50
   [<ffffffff8144aea5>] blkcg_exit_queue+0x35/0x40
   [<ffffffff8142d476>] blk_release_queue+0x26/0xd0
   [<ffffffff81454968>] kobject_cleanup+0x38/0x70
   [<ffffffff81454848>] kobject_put+0x28/0x60
   [<ffffffff81427505>] blk_put_queue+0x15/0x20
   [<ffffffff817d07bb>] scsi_device_dev_release_usercontext+0x16b/0x1c0
   [<ffffffff810bc339>] execute_in_process_context+0x89/0xa0
   [<ffffffff817d064c>] scsi_device_dev_release+0x1c/0x20
   [<ffffffff817930e2>] device_release+0x32/0xa0
   [<ffffffff81454968>] kobject_cleanup+0x38/0x70
   [<ffffffff81454848>] kobject_put+0x28/0x60
   [<ffffffff817934d7>] put_device+0x17/0x20
   [<ffffffff817d11b9>] __scsi_remove_device+0xa9/0xe0
   [<ffffffff817d121b>] scsi_remove_device+0x2b/0x40
   [<ffffffff817d1257>] sdev_store_delete+0x27/0x30
   [<ffffffff81792ca8>] dev_attr_store+0x18/0x30
   [<ffffffff8126f75e>] sysfs_kf_write+0x3e/0x50
   [<ffffffff8126ea87>] kernfs_fop_write+0xe7/0x170
   [<ffffffff811f5e9f>] vfs_write+0xaf/0x1d0
   [<ffffffff811f69bd>] SyS_write+0x4d/0xc0
   [<ffffffff81d24692>] system_call_fastpath+0x16/0x1b

776687bce4 ("block, blk-mq: draining can't be skipped even if
bypass_depth was non-zero") made it easier to trigger this bug by
making blk_queue_bypass_start() drain even when it loses the first
bypass test to blk_cleanup_queue(); however, the bug has always been
there even before the commit as blk_queue_bypass_start() could race
against queue destruction, win the initial bypass test but perform the
actual draining after blk_cleanup_queue() already destroyed all blkgs.

Fix it by skippping calling into policy draining if all the blkgs are
already gone.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Shirish Pargaonkar <spargaonkar@suse.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Jet Chen <jet.chen@intel.com>
Cc: stable@vger.kernel.org
Tested-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-16 09:52:03 +02:00
Tejun Heo 2cf669a58d cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
Currently, cftypes added by cgroup_add_cftypes() are used for both the
unified default hierarchy and legacy ones and subsystems can mark each
file with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to
appear only on one of them.  This is quite hairy and error-prone.
Also, we may end up exposing interface files to the default hierarchy
without thinking it through.

cgroup_subsys will grow two separate cftype addition functions and
apply each only on the hierarchies of the matching type.  This will
allow organizing cftypes in a lot clearer way and encourage subsystems
to scrutinize the interface which is being exposed in the new default
hierarchy.

In preparation, this patch adds cgroup_add_legacy_cftypes() which
currently is a simple wrapper around cgroup_add_cftypes() and replaces
all cgroup_add_cftypes() usages with it.

While at it, this patch drops a completely spurious return from
__hugetlb_cgroup_file_init().

This patch doesn't introduce any functional differences.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-07-15 11:05:09 -04:00
Tejun Heo 5577964e64 cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
Currently, cgroup_subsys->base_cftypes is used for both the unified
default hierarchy and legacy ones and subsystems can mark each file
with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to appear
only on one of them.  This is quite hairy and error-prone.  Also, we
may end up exposing interface files to the default hierarchy without
thinking it through.

cgroup_subsys will grow two separate cftype arrays and apply each only
on the hierarchies of the matching type.  This will allow organizing
cftypes in a lot clearer way and encourage subsystems to scrutinize
the interface which is being exposed in the new default hierarchy.

In preparation, this patch renames cgroup_subsys->base_cftypes to
cgroup_subsys->legacy_cftypes.  This patch is pure rename.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-07-15 11:05:09 -04:00
Jens Axboe 26a337944e Revert "bio: modify __bio_add_page() to accept pages that don't start a new segment"
This reverts commit 254c4407cb.

It causes crashes with cryptsetup, even after a few iterations and
updates. Drop it for now.
2014-07-14 22:04:47 +02:00
Mikulas Patocka 3b3a1814d1 block: provide compat ioctl for BLKZEROOUT
This patch provides the compat BLKZEROOUT ioctl. The argument is a pointer
to two uint64_t values, so there is no need to translate it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org	# 3.7+
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-14 12:27:20 +02:00
Tejun Heo 0b462c89e3 blkcg: don't call into policy draining if root_blkg is already gone
While a queue is being destroyed, all the blkgs are destroyed and its
->root_blkg pointer is set to NULL.  If someone else starts to drain
while the queue is in this state, the following oops happens.

  NULL pointer dereference at 0000000000000028
  IP: [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230
  PGD e4a1067 PUD b773067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in: cfq_iosched(-) [last unloaded: cfq_iosched]
  CPU: 1 PID: 537 Comm: bash Not tainted 3.16.0-rc3-work+ #2
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  task: ffff88000e222250 ti: ffff88000efd4000 task.ti: ffff88000efd4000
  RIP: 0010:[<ffffffff8144e944>]  [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230
  RSP: 0018:ffff88000efd7bf0  EFLAGS: 00010046
  RAX: 0000000000000000 RBX: ffff880015091450 RCX: 0000000000000001
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffff88000efd7c10 R08: 0000000000000000 R09: 0000000000000001
  R10: ffff88000e222250 R11: 0000000000000000 R12: ffff880015091450
  R13: ffff880015092e00 R14: ffff880015091d70 R15: ffff88001508fc28
  FS:  00007f1332650740(0000) GS:ffff88001fa80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000028 CR3: 0000000009446000 CR4: 00000000000006e0
  Stack:
   ffffffff8144e8f6 ffff880015091450 0000000000000000 ffff880015091d80
   ffff88000efd7c28 ffffffff8144ae2f ffff880015091450 ffff88000efd7c58
   ffffffff81427641 ffff880015091450 ffffffff82401f00 ffff880015091450
  Call Trace:
   [<ffffffff8144ae2f>] blkcg_drain_queue+0x1f/0x60
   [<ffffffff81427641>] __blk_drain_queue+0x71/0x180
   [<ffffffff81429b3e>] blk_queue_bypass_start+0x6e/0xb0
   [<ffffffff814498b8>] blkcg_deactivate_policy+0x38/0x120
   [<ffffffff8144ec44>] blk_throtl_exit+0x34/0x50
   [<ffffffff8144aea5>] blkcg_exit_queue+0x35/0x40
   [<ffffffff8142d476>] blk_release_queue+0x26/0xd0
   [<ffffffff81454968>] kobject_cleanup+0x38/0x70
   [<ffffffff81454848>] kobject_put+0x28/0x60
   [<ffffffff81427505>] blk_put_queue+0x15/0x20
   [<ffffffff817d07bb>] scsi_device_dev_release_usercontext+0x16b/0x1c0
   [<ffffffff810bc339>] execute_in_process_context+0x89/0xa0
   [<ffffffff817d064c>] scsi_device_dev_release+0x1c/0x20
   [<ffffffff817930e2>] device_release+0x32/0xa0
   [<ffffffff81454968>] kobject_cleanup+0x38/0x70
   [<ffffffff81454848>] kobject_put+0x28/0x60
   [<ffffffff817934d7>] put_device+0x17/0x20
   [<ffffffff817d11b9>] __scsi_remove_device+0xa9/0xe0
   [<ffffffff817d121b>] scsi_remove_device+0x2b/0x40
   [<ffffffff817d1257>] sdev_store_delete+0x27/0x30
   [<ffffffff81792ca8>] dev_attr_store+0x18/0x30
   [<ffffffff8126f75e>] sysfs_kf_write+0x3e/0x50
   [<ffffffff8126ea87>] kernfs_fop_write+0xe7/0x170
   [<ffffffff811f5e9f>] vfs_write+0xaf/0x1d0
   [<ffffffff811f69bd>] SyS_write+0x4d/0xc0
   [<ffffffff81d24692>] system_call_fastpath+0x16/0x1b

776687bce4 ("block, blk-mq: draining can't be skipped even if
bypass_depth was non-zero") made it easier to trigger this bug by
making blk_queue_bypass_start() drain even when it loses the first
bypass test to blk_cleanup_queue(); however, the bug has always been
there even before the commit as blk_queue_bypass_start() could race
against queue destruction, win the initial bypass test but perform the
actual draining after blk_cleanup_queue() already destroyed all blkgs.

Fix it by skippping calling into policy draining if all the blkgs are
already gone.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Shirish Pargaonkar <spargaonkar@suse.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Jet Chen <jet.chen@intel.com>
Cc: stable@vger.kernel.org
Tested-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-12 17:55:10 +02:00
Tejun Heo aa6ec29bee cgroup: remove sane_behavior support on non-default hierarchies
sane_behavior has been used as a development vehicle for the default
unified hierarchy.  Now that the default hierarchy is in place, the
flag became redundant and confusing as its usage is allowed on all
hierarchies.  There are gonna be either the default hierarchy or
legacy ones.  Let's make that clear by removing sane_behavior support
on non-default hierarchies.

This patch replaces cgroup_sane_behavior() with cgroup_on_dfl().  The
comment on top of CGRP_ROOT_SANE_BEHAVIOR is moved to on top of
cgroup_on_dfl() with sane_behavior specific part dropped.

On the default and legacy hierarchies w/o sane_behavior, this
shouldn't cause any behavior differences.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
2014-07-09 10:08:08 -04:00
Tejun Heo 1ced953b17 blkcg, memcg: make blkcg depend on memcg on the default hierarchy
Currently, the blkio subsystem attributes all of writeback IOs to the
root.  One of the issues is that there's no way to tell who originated
a writeback IO from block layer.  Those IOs are usually issued
asynchronously from a task which didn't have anything to do with
actually generating the dirty pages.  The memory subsystem, when
enabled, already keeps track of the ownership of each dirty page and
it's desirable for blkio to piggyback instead of adding its own
per-page tag.

cgroup now has a mechanism to express such dependency -
cgroup_subsys->depends_on.  This patch declares that blkcg depends on
memcg so that memcg is enabled automatically on the default hierarchy
when available.  Future changes will make blkcg map the memcg tag to
find out the cgroup to blame for writeback IOs.

As this means that a memcg may be made invisible, this patch also
implements css_reset() for memcg which resets its basic
configurations.  This implementation will probably need to be expanded
to cover other states which are used in the default hierarchy.

v2: blkcg's dependency on memcg is wrapped with CONFIG_MEMCG to avoid
    build failure.  Reported by kbuild test robot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
2014-07-08 18:02:57 -04:00
Christoph Hellwig d45b3279a5 block: don't assume last put of shared tags is for the host
There is no inherent reason why the last put of a tag structure must be
the one for the Scsi_Host, as device model objects can be held for
arbitrary periods.  Merge blk_free_tags and __blk_free_tags into a single
funtion that just release a references and get rid of the BUG() when the
host reference wasn't the last.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-08 12:25:28 +02:00
Maurizio Lombardi 254c4407cb bio: modify __bio_add_page() to accept pages that don't start a new segment
The original behaviour is to refuse to add a new page if the maximum
number of segments has been reached, regardless of the fact the page we
are going to add can be merged into the last segment or not.

Unfortunately, when the system runs under heavy memory fragmentation
conditions, a driver may try to add multiple pages to the last segment.
The original code won't accept them and EBUSY will be reported to
userspace.

This patch modifies the function so it refuses to add a page only in case
the latter starts a new segment and the maximum number of segments has
already been reached.

The bug can be easily reproduced with the st driver:

1) set CONFIG_SCSI_MPT2SAS_MAX_SGE or CONFIG_SCSI_MPT3SAS_MAX_SGE  to 16
2) modprobe st buffer_kbs=1024
3) #dd if=/dev/zero of=/dev/st0 bs=1M count=10
   dd: error writing `/dev/st0': Device or resource busy

[ming.lei@canonical.com: update bi_iter.bi_size before recounting segments]
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Tested-by: Dongsu Park <dongsu.park@profitbricks.com>
Tested-by: Jet Chen <jet.chen@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:55:15 -06:00
Douglas Gilbert d15156138d block SG_IO: add SG_FLAG_Q_AT_HEAD flag
After the SG_IO ioctl was copied into the block layer and
later into the bsg driver, subtle differences emerged.

One difference is the way injected commands are queued through
the block layer (i.e. this is not SCSI device queueing nor SATA
NCQ). Summarizing:
  - SG_IO on block layer device: blk_exec*(at_head=false)
  - sg device SG_IO: at_head=true
  - bsg device SG_IO: at_head=true

Some time ago Boaz Harrosh introduced a sg v4 flag called
BSG_FLAG_Q_AT_TAIL to override the bsg driver default. A
recent patch titled: "sg: add SG_FLAG_Q_AT_TAIL flag"
allowed the sg driver default to be overridden. This patch
allows a SG_IO ioctl sent to a block layer device to have
its default overridden.

ChangeLog:
    - introduce SG_FLAG_Q_AT_HEAD flag in sg.h to cause
      commands that are injected via a block layer
      device SG_IO ioctl to set at_head=true
    - make comments clearer about queueing in sg.h since the
      header is used both by the sg device and block layer
      device implementations of the SG_IO ioctl.
    - introduce BSG_FLAG_Q_AT_HEAD in bsg.h for compatibility
      (it does nothing) and update comments.

Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:48:05 -06:00
Akinobu Mita 9b4231bf99 block: fix SG_[GS]ET_RESERVED_SIZE ioctl when max_sectors is huge
SG_GET_RESERVED_SIZE and SG_SET_RESERVED_SIZE ioctls access a reserved
buffer in bytes as int type.  The value needs to be capped at the request
queue's max_sectors.  But integer overflow is not correctly handled in
the calculation when converting max_sectors from sectors to bytes.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:43:09 -06:00
Akinobu Mita 63f2649659 block: fix BLKSECTGET ioctl when max_sectors is greater than USHRT_MAX
BLKSECTGET ioctl loads the request queue's max_sectors as unsigned
short value to the argument pointer.  So if the max_sector is greater
than USHRT_MAX, the upper 16 bits of that is just discarded.

In such case, USHRT_MAX is more preferable than the lower 16 bits of
max_sectors.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: linux-scsi@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:43:07 -06:00
Fabian Frederick 16e1556526 block/partitions/efi.c: kerneldoc fixing
Adding function documentation and fixing kerneldoc warnings
('field: description' uniformization).

Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:40:05 -06:00
Fabian Frederick dce14c239a block/partitions/msdos.c: code clean-up
checkpatch fixing:
WARNING: Missing a blank line after declarations
WARNING: space prohibited between function name and open parenthesis '('
ERROR: spaces required around that '<' (ctx:VxV)

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:40:03 -06:00
Fabian Frederick 600ffc5ead block/partitions/amiga.c: replace nolevel printk by pr_err
Also add no prefix pr_fmt to avoid any future default format update

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:40:02 -06:00
Fabian Frederick 472d5e2af2 block/partitions/aix.c: replace count*size kzalloc by kcalloc
kcalloc manages count*sizeof overflow.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:40:00 -06:00
Gu Zheng cbcd1054a1 bio-integrity: add "bip_max_vcnt" into struct bio_integrity_payload
Commit 08778795 ("block: Fix nr_vecs for inline integrity vectors") from
Martin introduces the function bip_integrity_vecs(get the useful vectors)
to fix the issue about nr_vecs for inline integrity vectors that reported
by David Milburn.

But it seems that bip_integrity_vecs() will return the wrong number if the
bio is not based on any bio_set for some reason(bio->bi_pool == NULL),
because in that case, the bip_inline_vecs[0] is malloced directly.  So
here we add the bip_max_vcnt to record the count of vector slots, and
cleanup the function bip_integrity_vecs().

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:36:47 -06:00
Tejun Heo add703fda9 blk-mq: use percpu_ref for mq usage count
Currently, blk-mq uses a percpu_counter to keep track of how many
usages are in flight.  The percpu_counter is drained while freezing to
ensure that no usage is left in-flight after freezing is complete.
blk_mq_queue_enter/exit() and blk_mq_[un]freeze_queue() implement this
per-cpu gating mechanism.

This type of code has relatively high chance of subtle bugs which are
extremely difficult to trigger and it's way too hairy to be open coded
in blk-mq.  percpu_ref can serve the same purpose after the recent
changes.  This patch replaces the open-coded per-cpu usage counting
and draining mechanism with percpu_ref.

blk_mq_queue_enter() performs tryget_live on the ref and exit()
performs put.  blk_mq_freeze_queue() kills the ref and waits until the
reference count reaches zero.  blk_mq_unfreeze_queue() revives the ref
and wakes up the waiters.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:34:38 -06:00
Tejun Heo 72d6f02a8d blk-mq: collapse __blk_mq_drain_queue() into blk_mq_freeze_queue()
Keeping __blk_mq_drain_queue() as a separate function doesn't buy us
anything and it's gonna be further simplified.  Let's flatten it into
its caller.

This patch doesn't make any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:33:02 -06:00
Tejun Heo 780db2071a blk-mq: decouble blk-mq freezing from generic bypassing
blk_mq freezing is entangled with generic bypassing which bypasses
blkcg and io scheduler and lets IO requests fall through the block
layer to the drivers in FIFO order.  This allows forward progress on
IOs with the advanced features disabled so that those features can be
configured or altered without worrying about stalling IO which may
lead to deadlock through memory allocation.

However, generic bypassing doesn't quite fit blk-mq.  blk-mq currently
doesn't make use of blkcg or ioscheds and it maps bypssing to
freezing, which blocks request processing and drains all the in-flight
ones.  This causes problems as bypassing assumes that request
processing is online.  blk-mq works around this by conditionally
allowing request processing for the problem case - during queue
initialization.

Another weirdity is that except for during queue cleanup, bypassing
started on the generic side prevents blk-mq from processing new
requests but doesn't drain the in-flight ones.  This shouldn't break
anything but again highlights that something isn't quite right here.

The root cause is conflating blk-mq freezing and generic bypassing
which are two different mechanisms.  The only intersecting purpose
that they serve is during queue cleanup.  Let's properly separate
blk-mq freezing from generic bypassing and simply use it where
necessary.

* request_queue->mq_freeze_depth is added and
  blk_mq_[un]freeze_queue() now operate on this counter instead of
  ->bypass_depth.  The replacement for QUEUE_FLAG_BYPASS isn't added
  but the counter is tested directly.  This will be further updated by
  later changes.

* blk_mq_drain_queue() is dropped and "__" prefix is dropped from
  blk_mq_freeze_queue().  Queue cleanup path now calls
  blk_mq_freeze_queue() directly.

* blk_queue_enter()'s fast path condition is simplified to simply
  check @q->mq_freeze_depth.  Previously, the condition was

	!blk_queue_dying(q) &&
	    (!blk_queue_bypass(q) || !blk_queue_init_done(q))

  mq_freeze_depth is incremented right after dying is set and
  blk_queue_init_done() exception isn't necessary as blk-mq doesn't
  start frozen, which only leaves the blk_queue_bypass() test which
  can be replaced by @q->mq_freeze_depth test.

This change simplifies the code and reduces confusion in the area.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:31:13 -06:00
Tejun Heo 776687bce4 block, blk-mq: draining can't be skipped even if bypass_depth was non-zero
Currently, both blk_queue_bypass_start() and blk_mq_freeze_queue()
skip queue draining if bypass_depth was already above zero.  The
assumption is that the one which bumped the bypass_depth should have
performed draining already; however, there's nothing which prevents a
new instance of bypassing/freezing from starting before the previous
one finishes draining.  The current code may allow the later
bypassing/freezing instances to complete while there still are
in-flight requests which haven't finished draining.

Fix it by draining regardless of bypass_depth.  We still skip draining
from blk_queue_bypass_start() while the queue is initializing to avoid
introducing excessive delays during boot.  INIT_DONE setting is moved
above the initial blk_queue_bypass_end() so that bypassing attempts
can't slip inbetween.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:29:17 -06:00
Tejun Heo 531ed6261e blk-mq: fix a memory ordering bug in blk_mq_queue_enter()
blk-mq uses a percpu_counter to keep track of how many usages are in
flight.  The percpu_counter is drained while freezing to ensure that
no usage is left in-flight after freezing is complete.

blk_mq_queue_enter/exit() and blk_mq_[un]freeze_queue() implement this
per-cpu gating mechanism; unfortunately, it contains a subtle bug -
smp_wmb() in blk_mq_queue_enter() doesn't prevent prevent the cpu from
fetching @q->bypass_depth before incrementing @q->mq_usage_counter and
if freezing happens inbetween the caller can slip through and freezing
can be complete while there are active users.

Use smp_mb() instead so that bypass_depth and mq_usage_counter
modifications and tests are properly interlocked.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-01 10:27:06 -06:00
Linus Torvalds 3493860c76 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A small collection of fixes/changes for the current series.  This
  contains:

   - Removal of dead code from Gu Zheng.

   - Revert of two bad fixes that went in earlier in this round, marking
     things as __init that were not purely used from init.

   - A fix for blk_mq_start_hw_queue() using the __blk_mq_run_hw_queue(),
     which could place us wrongly.  Make it use the non __ variant,
     which handles cases where we are called from the wrong CPU set.
     From me.

   - A fix for drbd, which allocates discard requests without room for
     the SCSI payload.  From Lars Ellenberg.

   - A fix for user-after-free in the blkcg code from Tejun.

   - Addition of limiting gaps in SG lists, if the hardware needs it.
     This is the last pre-req patch for blk-mq to enable the full NVMe
     conversion.  Could wait until 3.17, but it's simple enough so would
     be nice to have everything we need for the NVMe port in the 3.17
     release.  From me"

* 'for-linus' of git://git.kernel.dk/linux-block:
  drbd: fix NULL pointer deref in blk_add_request_payload
  blk-mq: blk_mq_start_hw_queue() should use blk_mq_run_hw_queue()
  block: add support for limiting gaps in SG lists
  bio: remove unused macro bip_vec_idx()
  Revert "block: add __init to elv_register"
  Revert "block: add __init to blkcg_policy_register"
  blkcg: fix use-after-free in __blkg_release_rcu() by making blkcg_gq refcnt an atomic_t
  floppy: format block0 read error message properly
2014-06-26 13:06:13 -07:00
Jens Axboe 0ffbce80c2 blk-mq: blk_mq_start_hw_queue() should use blk_mq_run_hw_queue()
Currently it calls __blk_mq_run_hw_queue(), which depends on the
CPU placement being correct. This means it's not possible to call
blk_mq_start_hw_queues(q) from a context that is correct for all
queues, leading to triggering the

WARN_ON(!cpumask_test_cpu(raw_smp_processor_id(), hctx->cpumask));

in __blk_mq_run_hw_queue().

Reported-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-25 08:22:34 -06:00
Jens Axboe 66cb45aa41 block: add support for limiting gaps in SG lists
Another restriction inherited for NVMe - those devices don't support
SG lists that have "gaps" in them. Gaps refers to cases where the
previous SG entry doesn't end on a page boundary. For NVMe, all SG
entries must start at offset 0 (except the first) and end on a page
boundary (except the last).

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-24 16:22:24 -06:00
Jens Axboe e567bf7112 Revert "block: add __init to elv_register"
This reverts commit b5097e956a.

The original commit is buggy, we do use the registration functions
at runtime, for instance when loading IO schedulers through sysfs.

Reported-by: Damien Wyart <damien.wyart@gmail.com>
2014-06-22 16:34:11 -06:00
Jens Axboe d5bf02914e Revert "block: add __init to blkcg_policy_register"
This reverts commit a2d445d440.

The original commit is buggy, we do use the registration functions
at runtime for modular builds.
2014-06-22 16:34:11 -06:00
Tejun Heo a5049a8ae3 blkcg: fix use-after-free in __blkg_release_rcu() by making blkcg_gq refcnt an atomic_t
Hello,

So, this patch should do.  Joe, Vivek, can one of you guys please
verify that the oops goes away with this patch?

Jens, the original thread can be read at

  http://thread.gmane.org/gmane.linux.kernel/1720729

The fix converts blkg->refcnt from int to atomic_t.  It does some
overhead but it should be minute compared to everything else which is
going on and the involved cacheline bouncing, so I think it's highly
unlikely to cause any noticeable difference.  Also, the refcnt in
question should be converted to a perpcu_ref for blk-mq anyway, so the
atomic_t is likely to go away pretty soon anyway.

Thanks.

------- 8< -------
__blkg_release_rcu() may be invoked after the associated request_queue
is released with a RCU grace period inbetween.  As such, the function
and callbacks invoked from it must not dereference the associated
request_queue.  This is clearly indicated in the comment above the
function.

Unfortunately, while trying to fix a different issue, 2a4fd070ee
("blkcg: move bulk of blkcg_gq release operations to the RCU
callback") ignored this and added [un]locking of @blkg->q->queue_lock
to __blkg_release_rcu().  This of course can cause oops as the
request_queue may be long gone by the time this code gets executed.

  general protection fault: 0000 [#1] SMP
  CPU: 21 PID: 30 Comm: rcuos/21 Not tainted 3.15.0 #1
  Hardware name: Stratus ftServer 6400/G7LAZ, BIOS BIOS Version 6.3:57 12/25/2013
  task: ffff880854021de0 ti: ffff88085403c000 task.ti: ffff88085403c000
  RIP: 0010:[<ffffffff8162e9e5>]  [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60
  RSP: 0018:ffff88085403fdf0  EFLAGS: 00010086
  RAX: 0000000000020000 RBX: 0000000000000010 RCX: 0000000000000000
  RDX: 000060ef80008248 RSI: 0000000000000286 RDI: 6b6b6b6b6b6b6b6b
  RBP: ffff88085403fdf0 R08: 0000000000000286 R09: 0000000000009f39
  R10: 0000000000020001 R11: 0000000000020001 R12: ffff88103c17a130
  R13: ffff88103c17a080 R14: 0000000000000000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff88107fca0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000006e5ab8 CR3: 000000000193d000 CR4: 00000000000407e0
  Stack:
   ffff88085403fe18 ffffffff812cbfc2 ffff88103c17a130 0000000000000000
   ffff88103c17a130 ffff88085403fec0 ffffffff810d1d28 ffff880854021de0
   ffff880854021de0 ffff88107fcaec58 ffff88085403fe80 ffff88107fcaec30
  Call Trace:
   [<ffffffff812cbfc2>] __blkg_release_rcu+0x72/0x150
   [<ffffffff810d1d28>] rcu_nocb_kthread+0x1e8/0x300
   [<ffffffff81091d81>] kthread+0xe1/0x100
   [<ffffffff8163813c>] ret_from_fork+0x7c/0xb0
  Code: ff 47 04 48 8b 7d 08 be 00 02 00 00 e8 55 48 a4 ff 5d c3 0f 1f 00 66 66 66 66 90 55 48 89 e5
  +fa 66 66 90 66 66 90 b8 00 00 02 00 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 75 02 5d c3 83 e2 fe 0f
  +b7
  RIP  [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60
   RSP <ffff88085403fdf0>

The request_queue locking was added because blkcg_gq->refcnt is an int
protected with the queue lock and __blkg_release_rcu() needs to put
the parent.  Let's fix it by making blkcg_gq->refcnt an atomic_t and
dropping queue locking in the function.

Given the general heavy weight of the current request_queue and blkcg
operations, this is unlikely to cause any noticeable overhead.
Moreover, blkcg_gq->refcnt is likely to be converted to percpu_ref in
the near future, so whatever (most likely negligible) overhead it may
add is temporary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/g/alpine.DEB.2.02.1406081816540.17948@jlaw-desktop.mno.stratus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-22 16:30:52 -06:00
Linus Torvalds f1d702487b Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A smaller collection of fixes for the block core that would be nice to
  have in -rc2.  This pull request contains:

   - Fixes for races in the wait/wakeup logic used in blk-mq from
     Alexander.  No issues have been observed, but it is definitely a
     bit flakey currently.  Alternatively, we may drop the cyclic
     wakeups going forward, but that needs more testing.

   - Some cleanups from Christoph.

   - Fix for an oops in null_blk if queue_mode=1 and softirq completions
     are used.  From me.

   - A fix for a regression caused by the chunk size setting.  It
     inadvertently used max_hw_sectors instead of max_sectors, which is
     incorrect, and causes hangs on btrfs multi-disk setups (where hw
     sectors apparently isn't set).  From me.

   - Removal of WQ_POWER_EFFICIENT in the kblockd creation.  This was a
     recent addition as well, but it actually breaks blk-mq which relies
     on strict scheduling.  If the workqueue power_efficient mode is
     turned on, this breaks blk-mq.  From Matias.

   - null_blk module parameter description fix from Mike"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: bitmap tag: fix races in bt_get() function
  blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt
  blk-mq: bitmap tag: fix races on shared ::wake_index fields
  block: blk_max_size_offset() should check ->max_sectors
  null_blk: fix softirq completions for queue_mode == 1
  blk-mq: merge blk_mq_drain_queue and __blk_mq_drain_queue
  blk-mq: properly drain stopped queues
  block: remove WQ_POWER_EFFICIENT from kblockd
  null_blk: fix name and description of 'queue_mode' module parameter
  block: remove elv_abort_queue and blk_abort_flushes
2014-06-19 17:56:43 -10:00
Alexander Gordeev 86fb5c56cf blk-mq: bitmap tag: fix races in bt_get() function
This update fixes few issues in bt_get() function:

- list_empty(&wait.task_list) check is not protected;

- was_empty check is always true which results in *every* thread
  entering the loop resets bt_wait_state::wait_cnt counter rather
  than every bt->wake_cnt'th thread;

- 'bt_wait_state::wait_cnt' counter update is redundant, since
  it also gets reset in bt_clear_tag() function;

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-17 22:13:08 -07:00
Alexander Gordeev 2971c35f35 blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt
This piece of code in bt_clear_tag() function is racy:

	bs = bt_wake_ptr(bt);
	if (bs && atomic_dec_and_test(&bs->wait_cnt)) {
		atomic_set(&bs->wait_cnt, bt->wake_cnt);
 		wake_up(&bs->wait);
	}

Since nothing prevents bt_wake_ptr() from returning the very
same 'bs' address on multiple CPUs, the following scenario is
possible:

    CPU1                                CPU2
    ----                                ----

0.  bs = bt_wake_ptr(bt);               bs = bt_wake_ptr(bt);
1.  atomic_dec_and_test(&bs->wait_cnt)
2.                                      atomic_dec_and_test(&bs->wait_cnt)
3.  atomic_set(&bs->wait_cnt, bt->wake_cnt);

If the decrement in [1] yields zero then for some amount of time
the decrement in [2] results in a negative/overflow value, which
is not expected. The follow-up assignment in [3] overwrites the
invalid value with the batch value (and likely prevents the issue
from being severe) which is still incorrect and should be a lesser.

Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-17 22:13:05 -07:00
Alexander Gordeev 8537b12034 blk-mq: bitmap tag: fix races on shared ::wake_index fields
Fix racy updates of shared blk_mq_bitmap_tags::wake_index
and blk_mq_hw_ctx::wake_index fields.

Cc: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-17 22:12:35 -07:00
Linus Torvalds b55b390202 Merge git://git.infradead.org/users/willy/linux-nvme
Pull NVMe update from Matthew Wilcox:
 "Mostly bugfixes again for the NVMe driver.  I'd like to call out the
  exported tracepoint in the block layer; I believe Keith has cleared
  this with Jens.

  We've had a few reports from people who're really pounding on NVMe
  devices at scale, hence the timeout changes (and new module
  parameters), hotplug cpu deadlock, tracepoints, and minor performance
  tweaks"

[ Jens hadn't seen that tracepoint thing, but is ok with it - it will
  end up going away when mq conversion happens ]

* git://git.infradead.org/users/willy/linux-nvme: (22 commits)
  NVMe: Fix START_STOP_UNIT Scsi->NVMe translation.
  NVMe: Use Log Page constants in SCSI emulation
  NVMe: Define Log Page constants
  NVMe: Fix hot cpu notification dead lock
  NVMe: Rename io_timeout to nvme_io_timeout
  NVMe: Use last bytes of f/w rev SCSI Inquiry
  NVMe: Adhere to request queue block accounting enable/disable
  NVMe: Fix nvme get/put queue semantics
  NVMe: Delete NVME_GET_FEAT_TEMP_THRESH
  NVMe: Make admin timeout a module parameter
  NVMe: Make iod bio timeout a parameter
  NVMe: Prevent possible NULL pointer dereference
  NVMe: Fix the buffer size passed in GetLogPage(CDW10.NUMD)
  NVMe: Update data structures for NVMe 1.2
  NVMe: Enable BUILD_BUG_ON checks
  NVMe: Update namespace and controller identify structures to the 1.1a spec
  NVMe: Flush with data support
  NVMe: Configure support for block flush
  NVMe: Add tracepoints
  NVMe: Protect against badly formatted CQEs
  ...
2014-06-15 15:58:03 -10:00
Christoph Hellwig 95ed068165 blk-mq: merge blk_mq_drain_queue and __blk_mq_drain_queue
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-13 12:17:40 -06:00
Christoph Hellwig 8f5280f4ee blk-mq: properly drain stopped queues
If we need to drain a queue we need to run all queues, even if they
are marked stopped to make sure the driver has a chance to error out
on all queued requests.

This fixes surprise removal with scsi-mq.

Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Bart Van Assche <bvanassche@acm.org>

Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-13 12:17:38 -06:00
Matias Bjørling 28747fcd22 block: remove WQ_POWER_EFFICIENT from kblockd
blk-mq issues async requests through kblockd. To issue a work request on
a specific CPU, kblockd_schedule_delayed_work_on is used. However, the
specific CPU choice may not be honored, if the power_efficient option
for workqueues is set. blk-mq requires that we have strict per-cpu
scheduling, so it wont work properly if kblockd is marked
POWER_EFFICIENT and power_efficient is set.

Remove the kblockd WQ_POWER_EFFICIENT flag to prevent this behavior.
This essentially reverts part of commit 695588f945, which added
the WQ_POWER_EFFICIENT marker to kblockd.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-11 15:53:39 -06:00
Christoph Hellwig 2940474af7 block: remove elv_abort_queue and blk_abort_flushes
elv_abort_queue has no callers, and blk_abort_flushes is only called by
elv_abort_queue.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-11 15:31:21 -06:00