Commit Graph

31 Commits

Author SHA1 Message Date
Bill Pemberton 0b255e927d i2c: remove __dev* attributes from subsystem
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> (for ocores and mux-gpio)
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> (for i2c-gpio)
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> (for puf3)
Acked-by: Barry Song <baohua.song@csr.com> (for sirf)
Reviewed-by: Jean Delvare <khali@linux-fr.org>
[wsa: Fixed "foo* bar" flaws while we are here]
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-12-22 20:13:45 +01:00
Axel Lin 56f2178898 i2c/busses: Use module_pci_driver
Convert the drivers in drivers/i2c/busses/* to usemodule_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Olof Johansson <olof@lixom.net>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Tomoya MORINAGA <tomoya.rohm@gmail.com>
2012-07-24 14:13:56 +02:00
corentin.labbe 65a2d74b76 i2c-ali1535: enable SPARC support
The i2c-ali1535 driver doesn't work on SPARC, because it assumes that
ioport address are 16-bit wide (address stored in an unsigned short).
But on SPARC arch, ioports are mapped in memory and so must be stored
in an unsigned long.

Use pci_resource_start for getting IOMEM base address, then read the
SMBBA of the i2c bus and use these together for I/O access.

I would like to thank Jean DELVARE for reviewing my patch.

Signed-off-by: LABBE Corentin <corentin.labbe@geomatys.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-01-12 20:32:04 +01:00
Jean Delvare 7c1f59c9d5 i2c: Fix error value returned by several bus drivers
When adding checks for ACPI resource conflicts to many bus drivers,
not enough attention was paid to the error paths, and for several
drivers this causes 0 to be returned on error in some cases. Fix this
by properly returning a non-zero value on every error.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
2012-01-12 20:32:03 +01:00
LABBE Corentin 3fea5df41d i2c-ali1535: Fix style issues
This is a fix-style patch for i2c-ali1535 (issues reported by
checkpatch.pl.)

Signed-off-by: LABBE Corentin <corentin.labbe@geomatys.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 17:49:42 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
H Hartley Sweeten 2178218027 i2c: Use <linux/io.h> instead of <asm/io.h>
As warned by checkpatch.pl, <linux/io.h> should be used instead of
<asm/io.h>.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-21 18:41:01 +02:00
Márton Németh 4111ecd217 i2c: Make PCI device ids constant
The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-03-02 12:23:37 +01:00
Jean Delvare abe38388e5 i2c: Add missing __devinit markers to old i2c adapter drivers
These _setup functions are called from _probe so they can be marked
__devinit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-12-06 17:06:23 +01:00
Roel Kluin 4ccc28f725 i2c: Timeouts off by 1
with while (timeout++ < MAX_TIMEOUT); timeout reaches MAX_TIMEOUT + 1
after the loop, so the tests below are off by one.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-05-05 08:39:24 +02:00
Jean Delvare 1745522ccb i2c: Delete many unused adapter IDs
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-01-26 21:19:52 +01:00
Jean Delvare 954a99307f i2c: Drop stray references to lm_sensors
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:34 +02:00
Jean Delvare 54fb4a05af i2c: Check for ACPI resource conflicts
Check for ACPI resource conflicts in i2c bus drivers. I've included
all recent SMBus master drivers for PC hardware.

I've voluntarily left out:
* Drivers that don't run on PCs: they can't conflict with ACPI.
* Bit-banged bus device drivers: it's very unlikely that ACPI would
  deal with such buses.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
2008-07-14 22:38:33 +02:00
Jean Delvare 3401b2fff3 i2c: Let bus drivers add SPD to their class
Let general purpose I2C/SMBus bus drivers add SPD to their class. Once
this is done, we will be able to tell the eeprom driver to only probe
for SPD EEPROMs and similar on these buses.

Note that I took a conservative approach here, adding I2C_CLASS_SPD to
many drivers that have no idea whether they can host SPD EEPROMs or not.
This is to make sure that the eeprom driver doesn't stop probing buses
where SPD EEPROMs or equivalent live.

So, bus driver maintainers and users should feel free to remove the SPD
class from drivers those buses never have SPD EEPROMs or they don't
want the eeprom driver to bind to them. Likewise, feel free to add the
SPD class to any bus driver I might have missed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:29 +02:00
Jean Delvare ac7fc4fb2b i2c: Consistently reject unsupported transactions
Many PC SMBus host controller drivers don't properly handle the case
where they are requested to achieve a transaction they do not support.
Update them so that the consistently print a warning message and
return a single error value in this case.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:25 +02:00
David Brownell 97140342e6 i2c: Bus drivers return -Errno not -1
Tighten error paths used by various i2c adapters (mostly x86) so
they return real fault/errno codes instead of a "-1" (which is
most often interpreted as "-EPERM").  Build tested, with eyeball
review.

One minor initial goal is to have adapters consistently return
the code "-ENXIO" when addressing a device doesn't get an ACK
response, at least in the probe paths where they are already
good at stifling related logspam.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-07-14 22:38:25 +02:00
David Brownell 2096b956d2 i2c: Shrink struct i2c_client
This shrinks the size of "struct i2c_client" by 40 bytes:

 - Substantially shrinks the string used to identify the chip type
 - The "flags" don't need to be so big
 - Removes some internal padding

It also adds kerneldoc for that struct, explaining how "name" is really a
chip type identifier; it's otherwise potentially confusing.

Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name
and for i2c_adapter.name, this needed to affect i2c_adapter too.  The
adapters which used that symbol now use the more-obviously-correct
idiom of taking the size of that field.

JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to
avoid wasting space in padding.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-05-01 23:26:28 +02:00
Robert P. J. Day 405ae7d381 Replace remaining references to "driverfs" with "sysfs".
Globally, s/driverfs/sysfs/g.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-17 19:13:42 +01:00
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Stephen Hemminger 9ace555d7d i2c: Add IDs to adapters
IDs have been defined but not used by most of the I2C adapters.
By having a unique ID, clients can check for correct connection
during probe.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-02-13 22:09:01 +01:00
Jean Delvare 8f9082c5ce i2c: Constify i2c_algorithm declarations, part 2
i2c: Constify i2c_algorithm declarations, part 2

Make struct i2c_algorithm declarations const in all i2c bus drivers
where it is possible.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26 15:38:52 -07:00
Jean Delvare 0cbcb4d39a [PATCH] I2C: i2c-ali1535: Drop redundant mutex
Drop a redundant mutex in driver i2c-ali1535. The struct i2c_adapter
includes a mutex for the same purpose, operated by i2c-core.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:54 -08:00
Jean Delvare 3fb9a65529 [PATCH] i2c: Semaphore to mutex conversions, part 3
Cleanup after the semaphores to mutexes conversions in the i2c
subsystem.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:51 -08:00
Arjan van de Ven b3585e4f5b [PATCH] I2C: Convert i2c to mutexes
The patch below converts a few i2c semaphores to mutexes

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-03-23 14:21:49 -08:00
Greg Kroah-Hartman 249bb070f5 [PATCH] PCI: removed unneeded .owner field from struct pci_driver
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10 16:09:17 -08:00
Laurent Riffard ccd7aa0cc9 [PATCH] Owner field additions to many i2c drivers, 1 of 5
This patch updates .owner field for various struct pci_driver variables.

Signed-off-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 14:02:11 -07:00
Jean Delvare d6072f842a [PATCH] i2c: Reuse name strings in i2c bus drivers
Clean up name string usage in 12 i2c bus drivers:
* Use the i2c_adapter name for requesting the I/O region rather than
  redefining a new string.
* Do not initialize the i2c_adapter name to "unset".
This should save a few data bytes here and there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/busses/i2c-ali1535.c |    6 +++---
 drivers/i2c/busses/i2c-ali1563.c |    6 ++++--
 drivers/i2c/busses/i2c-ali15x3.c |    5 +++--
 drivers/i2c/busses/i2c-amd756.c  |    5 ++---
 drivers/i2c/busses/i2c-amd8111.c |    4 +++-
 drivers/i2c/busses/i2c-i801.c    |    4 ++--
 drivers/i2c/busses/i2c-nforce2.c |    4 ++--
 drivers/i2c/busses/i2c-piix4.c   |    4 ++--
 drivers/i2c/busses/i2c-sis5595.c |    5 +++--
 drivers/i2c/busses/i2c-sis630.c  |    6 ++++--
 drivers/i2c/busses/i2c-sis96x.c  |    5 +++--
 drivers/i2c/busses/i2c-via.c     |    4 ++--
 12 files changed, 33 insertions(+), 25 deletions(-)
2005-10-28 14:02:06 -07:00
Jean Delvare 1d8b9e1bad [PATCH] I2C: Kill i2c_algorithm.id (4/7)
There are no more users of i2c_algorithm.id, so we can finally drop
this structure member.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:29 -07:00
Jean Delvare 975185880d [PATCH] I2C: Kill i2c_algorithm.name (1/7)
The name member of the i2c_algorithm is never used, although all
drivers conscientiously fill it. We can drop it completely, this
structure doesn't need to have a name.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:27 -07:00
Alexey Dobriyan f0bb60e7b1 [PATCH] I2C: drivers/i2c/*: #include <linux/config.h> cleanup
Files that don't use CONFIG_* stuff shouldn't include config.h
Files that use CONFIG_* stuff should include config.h

It's that simple. ;-)

Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 21:51:53 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00