Commit Graph

935 Commits

Author SHA1 Message Date
Linus Torvalds b7a7d1c1ec DMA mapping updates for 5.1
- add debugfs support for dumping dma-debug information (Corentin Labbe)
  - Kconfig cleanups (Andy Shevchenko and me)
  - debugfs cleanups (Greg Kroah-Hartman)
  - improve dma_map_resource and use it in the media code
  - arch_setup_dma_ops / arch_teardown_dma_ops cleanups
  - various small cleanups and improvements for the per-device coherent
    allocator
  - make the DMA mask an upper bound and don't fail "too large" dma mask
    in the remaning two architectures - this will allow big driver
    cleanups in the following merge windows
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAlyCKUgLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYP1vA//WNK5cxQVGZZsmsmkcNe3sCaJCZD4MpVpq/D+l87t
 3j1C1qmduOPyI1m061niYk7j4B4DeyeLs+XOeUsl5Yz+FqVvDICuNHXXJQSUr3Ao
 JbMfBis8Ne65Eyz0xxBltCWM7WiE6fdo7AGoR4Bzj3+f4xGOOazkRy4R6r67bU6x
 v3R5dTvfbSlvvKhn+j8ksAEYb+WPUmr6Z2dnlF0mShnOCpZVy0wd0M1gtEFKrVHx
 zKz9/va4/7yEcpdVqNtSDlHIsSZcFE3ZfTRWq6ZtBoRN+gNwrI0YylY7HtCfJWZG
 IxMiuQ+8SHGE8+NI2d56bs4MsHbqPBRSuadJNuZaTzdxs6FDTEnlCDeXwGF1cHf2
 qhVMfn17V4TZNT4NAd2wHa60cjTMoqraWeS06/b2tyXTF0uxyWj0BCjaHNJa+Ayc
 KCulq1n2LmTDiOGnZJT7Oui6PO5etOHAmvgMQumBNkzQJbPGvuiYGgsciYAMSmuy
 NccIrghQzR9BlG6U1srzTiGQJnpm38x1hWphtU6gQPwz5iKt3FBAfEWCic8U81QE
 JKSwoYv/5ChO+sy9880t/FLO8hn/7L55IOdZEfGkQ22gFzf3W5f9v2jFQc8XN2BO
 Fc6EjWERrmTzUi0f1Ooj3VPRtWuZq86KqlKByy6iZ5eXwxpGE1M0HZVoHYCW+aDd
 MYc=
 =nAMI
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping

Pull DMA mapping updates from Christoph Hellwig:

 - add debugfs support for dumping dma-debug information (Corentin
   Labbe)

 - Kconfig cleanups (Andy Shevchenko and me)

 - debugfs cleanups (Greg Kroah-Hartman)

 - improve dma_map_resource and use it in the media code

 - arch_setup_dma_ops / arch_teardown_dma_ops cleanups

 - various small cleanups and improvements for the per-device coherent
   allocator

 - make the DMA mask an upper bound and don't fail "too large" dma mask
   in the remaning two architectures - this will allow big driver
   cleanups in the following merge windows

* tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits)
  Documentation/DMA-API-HOWTO: update dma_mask sections
  sparc64/pci_sun4v: allow large DMA masks
  sparc64/iommu: allow large DMA masks
  sparc64: refactor the ali DMA quirk
  ccio: allow large DMA masks
  dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag
  dma-mapping: remove dma_mark_declared_memory_occupied
  dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig
  dma-mapping: improve selection of dma_declare_coherent availability
  dma-mapping: remove an incorrect __iommem annotation
  of: select OF_RESERVED_MEM automatically
  device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT
  mfd/sm501: depend on HAS_DMA
  dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability
  dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability
  dma-mapping: move debug configuration options to kernel/dma
  dma-debug: add dumping facility via debugfs
  dma: debug: no need to check return value of debugfs_create functions
  videobuf2: replace a layering violation with dma_map_resource
  dma-mapping: don't BUG when calling dma_map_resource on RAM
  ...
2019-03-10 11:54:48 -07:00
Mauro Carvalho Chehab 4b129dc907 media: common: fix several typos
Use codespell to fix lots of typos over frontends.

Manually verified to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-01 09:44:48 -05:00
Hans Verkuil 914c686864 media: vb2: fix epoll() by calling poll_wait first
The epoll function expects that whenever the poll file op is
called, the poll_wait function is also called. That didn't
always happen in vb2_core_poll() and vb2_poll(). Fix this,
otherwise epoll() would timeout when it shouldn't.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yi Qingliang <niqingliang2003@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 14:46:20 -05:00
Hans Verkuil 7e4e716244 media: vb2: keep track of timestamp status
If a stream is stopped, or if a USERPTR/DMABUF buffer is queued
backed by a different user address or dmabuf fd, then the timestamp
should be skipped by vb2_find_timestamp since the memory it refers
to is no longer valid.

So keep track of a 'copied_timestamp' state: it is set when the
timestamp is copied from an output to a capture buffer, and is
cleared when it is no longer valid.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 14:44:20 -05:00
Hans Verkuil cfc7740835 media: vb2: replace bool by bitfield in vb2_buffer
The bool type is not recommended for use in structs, so replace these
by bitfields.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 14:43:28 -05:00
Vivek Kasireddy 10a2bc7e63 media: v4l2-tpg-core: Add support for 32-bit packed YUV formats (v2)
Add support for the following formats to tpg:
 V4L2_PIX_FMT_AYUV32
 V4L2_PIX_FMT_XYUV32
 V4L2_PIX_FMT_VUYA32
 V4L2_PIX_FMT_VUYX32

Changes from v1:
Remove the duplicate case value

Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 14:31:23 -05:00
Hans Verkuil 15a40b27be media: videobuf: use u64 for the timestamp internally
Just like vb2 does, use u64 internally to store the timestamps
of the buffers. Only convert to timeval when interfacing with
userspace.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-07 12:11:19 -05:00
Hans Verkuil d889376243 media: videobuf2: remove unused variable
Commit 2cc1802f62 ("media: vb2: Keep dma-buf buffers mapped until
they are freed") removed code leaving a local variable unused.

Remove it to avoid a compiler warning.

Fixes: 2cc1802f62 ("media: vb2: Keep dma-buf buffers mapped until they are freed")

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-07 11:47:58 -05:00
Christoph Hellwig 55ea54441f videobuf2: replace a layering violation with dma_map_resource
vb2_dc_get_userptr pokes into arm direct mapping details to get the
resemblance of a dma address for a a physical address that does is
not backed by a page struct.  Not only is this not portable to other
architectures with dma direct mapping offsets, but also not to uses
of IOMMUs of any kind.  Switch to the proper dma_map_resource /
dma_unmap_resource interface instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2019-02-01 09:56:41 +01:00
Hans Verkuil 1284ed59a1 media: vb2: check that buf_out_validate is present
The buf_out_validate is required for output queues in combination
with requests. Check this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-31 09:31:34 -02:00
Hans Verkuil 28d77c21cb media: vb2: add buf_out_validate callback
When queueing a buffer to a request the 'field' value is not validated.
That field is only validated when the _buf_prepare() is called,
which happens when the request is queued.

However, this validation should happen at QBUF time, since you want
to know about this as soon as possible. Also, the spec requires that
the 'field' value is validated at QBUF time.

This patch adds a new buf_out_validate callback to validate the
output buffer at buf_prepare time or when QBUF queues an unprepared
buffer to a request. This callback is mandatory for output queues
that support requests.

This issue was found by v4l2-compliance since it failed to replace
V4L2_FIELD_ANY by a proper field value when testing the vivid video
output in combination with requests.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-31 09:29:47 -02:00
Pawel Osciak 2cc1802f62 media: vb2: Keep dma-buf buffers mapped until they are freed
When using vb2 for video decoding, dequeued capture buffers may still
be accessed by the hardware: this is the case when they are used as
reference frames for decoding subsequent frames.

When the buffer is imported with dma-buf, it needs to be mapped before
access. Until now, it was mapped when queuing and unmapped when
dequeuing, which doesn't work for access as a reference frames.

One way to solve this would be to map the buffer again when it is
needed as a reference, but the mapping/unmapping operations can
seriously impact performance. As a result, map the buffer once (when it
is first needed when queued) and keep it mapped until it is freed.

Reviewed-on: https://chromium-review.googlesource.com/334103
[Paul: Updated for mainline and changed commit message]

Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-31 09:28:44 -02:00
Hans Verkuil 03535e7a3a media: vb2: vb2_find_timestamp: drop restriction on buffer state
There really is no reason why vb2_find_timestamp can't just find
buffers in any state. Drop that part of the test.

This also means that vb->timestamp should only be set to 0 when
the driver doesn't copy timestamps.

This change allows for more efficient pipelining (i.e. you can use
a buffer for a reference frame even when it is queued).

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-31 09:26:55 -02:00
Peter Rosin 8db63f3d14 media: saa7146: make use of i2c_8bit_addr_from_msg
Because it looks neater.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16 12:38:42 -05:00
Andrzej Pietrasiewicz 66e988e96b media: Change Andrzej Pietrasiewicz's e-mail address
My @samsung.com address is going to cease existing soon, so change it to
an address which can actually be used to contact me.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16 11:21:07 -05:00
Hans Verkuil 245ede423b media: vb2: add vb2_find_timestamp()
Use v4l2_timeval_to_ns instead of timeval_to_ns to ensure that
both kernelspace and userspace will use the same conversion
function.

Next add a new vb2_find_timestamp() function to find buffers
with a specific timestamp.

This function will only look at DEQUEUED and DONE buffers, i.e.
buffers that are already processed.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-07 13:19:48 -05:00
Linus Torvalds 996680d461 media fixes for v4.20-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJcG4weAAoJEAhfPr2O5OEVMu8P/j5a3+qringy/94NgmpHBQop
 aOACNWTRE746CG8T0yKgHV13iiLTHhlVxrRfhADKomWFit0DOiE2G1QXDsw6jptl
 gfMKMz3tE7MNOt0E+1tFzkezduJ7TIvFw9rorJ9MuACr9RGc+jMc+8muu1Uhu+fS
 JArKYrn1xlBEP9k2pcgbxFIjzdRr1jEJ9MCdyxybaU4QWyH4rUq0u+i6RJ2JlLcV
 urXGeDaNwgq7uTcOdUIwcbB0lKCi3hhkuPyl850IaQHWkR1cIzRoMWk5ilW9YYR3
 8zDix9hORmPAdRIwhj0kJElTLZlTzF/u4+1fARmwKJlOYnAfRzSyFhC5P4huvmeA
 6KXP1jg3OcyU5mB/Ys0YpZDhUtlhpRmMCMKtZW0x4BPpYTfRkAz6almUM6kIyaKp
 Dv1cp4UJ8SGpqVxEFBSr6qPsoO0by8jdkgRsupaCn6tAtkG7VXDGR8yhzZB8Leai
 pdCXP/7Z5t3kWI0XceVlpgOjkC7qLbEQKLDk0dqg0XqFLEuXm7sifLGamGhqubVy
 BmRPzH9oVISutmM/8DL8MHBkAv5IESF1lwhOzM75LTtA7aDaBuHS6zRhh45VtdJx
 r8/+R9KEvKdWTFgnRpvaERJk64I0hU44gmPLOtt/kkCfaTOonbhIsZ55uZxKjkqg
 rHPVHJORalrJGy9Hnhpl
 =uZDa
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull more media updates from Mauro Carvalho Chehab:
 "The Intel IPU3 camera driver"

* tag 'media/v4.20-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (23 commits)
  media: staging/ipu3-imgu: Add MAINTAINERS entry
  media: staging/ipu3-imgu: Address documentation comments
  media: v4l: Add Intel IPU3 meta buffer formats
  media: doc-rst: Add Intel IPU3 documentation
  media: ipu3-imgu: Fix firmware binary location
  media: ipu3-imgu: Fix compiler warnings
  media: staging/intel-ipu3: Add dual pipe support
  media: staging/intel-ipu3: Add Intel IPU3 meta data uAPI
  media: staging/intel-ipu3: Add imgu top level pci device driver
  media: staging/intel-ipu3: Add v4l2 driver based on media framework
  media: staging/intel-ipu3: Add css pipeline programming
  media: staging/intel-ipu3: css: Initialize css hardware
  media: staging/intel-ipu3: css: Compute and program ccs
  media: staging/intel-ipu3: css: Add static settings for image pipeline
  media: staging/intel-ipu3: css: Add support for firmware management
  media: staging/intel-ipu3: css: Add dma buff pool utility functions
  media: staging/intel-ipu3: Implement DMA mapping functions
  media: staging/intel-ipu3: mmu: Implement driver
  media: staging/intel-ipu3: abi: Add structs
  media: staging/intel-ipu3: abi: Add register definitions and enum
  ...
2018-12-25 13:11:30 -08:00
Mauro Carvalho Chehab 4bd257d884 Linux 4.20-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwW4/oeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG2QMH/Rl6iMpTUX23tMHe
 eXQzAOSvQXaWlFoX25j1Jvt8nhS7Uy8vkdpYTCOI/7DF0Jg4O/6uxcZkErlwWxb8
 MW1rMgpfO+OpDLSLXAO2GKxaKI3ArqF2BcOQA2mji1/jR2VUTqmIvBoudn5d+GYz
 19aCyfdzmVTC38G9sBhhcqJ10EkxLiHe2K74bf4JxVuSf2EnTI4LYt5xJPDoT0/C
 6fOeUNwVhvv5a4svvzJmortq7x7BwyxBQArc7PbO0MPhabLU4wyFUOTRszgsGd76
 o5JuOFwgdIIHlSSacGla6rKq10nmkwR07fHfRFFwbvrfBOEHsXOP2hvzMZX+FLBK
 IXOzdtc=
 =XlMc
 -----END PGP SIGNATURE-----

Merge tag 'v4.20-rc7' into patchwork

Linux 4.20-rc7

* tag 'v4.20-rc7': (403 commits)
  Linux 4.20-rc7
  scripts/spdxcheck.py: always open files in binary mode
  checkstack.pl: fix for aarch64
  userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered
  fs/iomap.c: get/put the page in iomap_page_create/release()
  hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page()
  memblock: annotate memblock_is_reserved() with __init_memblock
  psi: fix reference to kernel commandline enable
  arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h
  mm/sparse: add common helper to mark all memblocks present
  mm: introduce common STRUCT_PAGE_MAX_SHIFT define
  alpha: fix hang caused by the bootmem removal
  XArray: Fix xa_alloc when id exceeds max
  drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3
  MAINTAINERS: Daniel for drm co-maintainer
  drm/amdgpu: drop fclk/gfxclk ratio setting
  IB/core: Fix oops in netdev_next_upper_dev_rcu()
  dm thin: bump target version
  drm/vmwgfx: remove redundant return ret statement
  drm/i915: Flush GPU relocs harder for gen3
  ...
2018-12-17 10:34:24 -05:00
Sakari Ailus 72148d1a57 media: v4l: Add support for V4L2_BUF_TYPE_META_OUTPUT
The V4L2_BUF_TYPE_META_OUTPUT mirrors the V4L2_BUF_TYPE_META_CAPTURE with
the exception that it is an OUTPUT type. The use case for this is to pass
buffers to the device that are not image data but metadata. The formats,
just as the metadata capture formats, are typically device specific and
highly structured.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Tian Shu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-14 05:10:48 -05:00
Sakari Ailus 078ab3ea2c media: Add a Kconfig option for the Request API
The Request API is now merged to the kernel but the confidence on the
stability of that API is not great, especially regarding the interaction
with V4L2.

Add a Kconfig option for the API, with a scary-looking warning.

The patch itself disables request creation as well as does not advertise
them as buffer flags. The driver requiring requests (cedrus) now depends
on the Kconfig option as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-05 13:07:43 -05:00
Hans Verkuil dde6bdcc97 media: vb2: don't unbind/put the object when going to state QUEUED
When a buffer is returned to state QUEUED (that happens when
start_streaming fails), then do not unbind and put the object
from the request. Nothing has changed yet, so just keep it as
is.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03 15:02:53 -05:00
Hans Verkuil 6093d3002e media: vb2: keep a reference to the request until dqbuf
When vb2_buffer_done is called the buffer is unbound from the
request and put. The media_request_object_put also 'put's the
request reference. If the application has already closed the
request fd, then that means that the request reference at that
point goes to 0 and the whole request is released.

This means that the control handler associated with the request is
also freed and that causes this kernel oops:

[174705.995401] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[174705.995411] in_atomic(): 1, irqs_disabled(): 1, pid: 28071, name: vivid-000-vid-o
[174705.995416] 2 locks held by vivid-000-vid-o/28071:
[174705.995420]  #0: 000000001ea3a232 (&dev->mutex#3){....}, at: vivid_thread_vid_out+0x3f5/0x550 [vivid]
[174705.995447]  #1: 00000000e30a0d1e (&(&q->done_lock)->rlock){....}, at: vb2_buffer_done+0x92/0x1d0 [videobuf2_common]
[174705.995460] Preemption disabled at:
[174705.995461] [<0000000000000000>]           (null)
[174705.995472] CPU: 11 PID: 28071 Comm: vivid-000-vid-o Tainted: G        W         4.20.0-rc1-test-no #88
[174705.995476] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[174705.995481] Call Trace:
[174705.995500]  dump_stack+0x46/0x60
[174705.995512]  ___might_sleep.cold.79+0xe1/0xf1
[174705.995523]  __mutex_lock+0x50/0x8f0
[174705.995531]  ? find_held_lock+0x2d/0x90
[174705.995536]  ? find_held_lock+0x2d/0x90
[174705.995542]  ? find_held_lock+0x2d/0x90
[174705.995564]  ? v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995576]  v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995590]  v4l2_ctrl_request_release+0x1c/0x30 [videodev]
[174705.995600]  media_request_clean+0x64/0xe0 [media]
[174705.995609]  media_request_release+0x19/0x40 [media]
[174705.995617]  vb2_buffer_done+0xef/0x1d0 [videobuf2_common]
[174705.995630]  vivid_thread_vid_out+0x2c1/0x550 [vivid]
[174705.995645]  ? vivid_stop_generating_vid_cap+0x1c0/0x1c0 [vivid]
[174705.995653]  kthread+0x113/0x130
[174705.995659]  ? kthread_park+0x80/0x80
[174705.995667]  ret_from_fork+0x35/0x40

The vb2_buffer_done function can be called from interrupt context, so
anything that sleeps is not allowed.

The solution is to increment the request refcount when the buffer is
queued and decrement it when the buffer is dequeued. Releasing the
request is fine if that happens from VIDIOC_DQBUF.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03 15:02:22 -05:00
Hans Verkuil b7ff0b0990 media: vb2: skip request checks for VIDIOC_PREPARE_BUF
VIDIOC_PREPARE_BUF should ignore V4L2_BUF_FLAG_REQUEST_FD since it isn't
doing anything with requests. So inform vb2_queue_or_prepare_buf whether
it is called from vb2_prepare_buf or vb2_qbuf and just return 0 in the
first case.

This was found when adding new v4l2-compliance checks.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03 15:01:38 -05:00
Hans Verkuil 04990215de media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failed
vb2_start_streaming() already rolls back the buffers, so there is no
need to call __vb2_queue_cancel(). Especially since __vb2_queue_cancel()
does too much, such as zeroing the q->queued_count value, causing vb2
to think that no buffers have been queued.

It appears that this call to __vb2_queue_cancel() is a left-over from
before commit b3379c6201.

Fixes: b3379c6201 ('vb2: only call start_streaming if sufficient buffers are queued')

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>      # for v4.16 and up
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-03 15:00:50 -05:00
Mauro Carvalho Chehab c06ef2e9ac media: vb2: be sure to unlock mutex on errors
As reported by smatch:
drivers/media/common/videobuf2/videobuf2-core.c: drivers/media/common/videobuf2/videobuf2-core.c:2159 vb2_mmap() warn: inconsistent returns 'mutex:&q->mmap_lock'.
  Locked on:   line 2148
  Unlocked on: line 2100
               line 2108
               line 2113
               line 2118
               line 2156
               line 2159

There is one error condition that doesn't unlock a mutex.

Fixes: cd26d1c4d1 ("media: vb2: vb2_mmap: move lock up")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 07:29:54 -05:00
Hans Verkuil 5e99456c20 media: videobuf2-v4l2: drop WARN_ON in vb2_warn_zero_bytesused()
Userspace shouldn't set bytesused to 0 for output buffers.
vb2_warn_zero_bytesused() warns about this (only once!), but it also
calls WARN_ON(1), which is confusing since it is not immediately clear
that it warns about a 0 value for bytesused.

Just drop the WARN_ON as it serves no purpose.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 06:42:15 -05:00
John Sheu d644cca50f media: vb2: Allow reqbufs(0) with "in use" MMAP buffers
Videobuf2 presently does not allow VIDIOC_REQBUFS to destroy outstanding
buffers if the queue is of type V4L2_MEMORY_MMAP, and if the buffers are
considered "in use".  This is different behavior than for other memory
types and prevents us from deallocating buffers in following two cases:

1) There are outstanding mmap()ed views on the buffer. However even if
   we put the buffer in reqbufs(0), there will be remaining references,
   due to vma .open/close() adjusting vb2 buffer refcount appropriately.
   This means that the buffer will be in fact freed only when the last
   mmap()ed view is unmapped.

2) Buffer has been exported as a DMABUF. Refcount of the vb2 buffer
   is managed properly by VB2 DMABUF ops, i.e. incremented on DMABUF
   get and decremented on DMABUF release. This means that the buffer
   will be alive until all importers release it.

Considering both cases above, there does not seem to be any need to
prevent reqbufs(0) operation, because buffer lifetime is already
properly managed by both mmap() and DMABUF code paths. Let's remove it
and allow userspace freeing the queue (and potentially allocating a new
one) even though old buffers might be still in processing.

To let userspace know that the kernel now supports orphaning buffers
that are still in use, add a new V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS
to be set by reqbufs and create_bufs.

[p.zabel@pengutronix.de: added V4L2_BUF_CAP_SUPPORTS_ORPHANED_BUFS,
 updated documentation, and added back debug message]

Signed-off-by: John Sheu <sheu@chromium.org>
Reviewed-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: added V4L2-BUF-CAP-SUPPORTS-ORPHANED-BUFS ref]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 06:41:39 -05:00
Hans Verkuil e5f71a27fa media: v4l2-tpg: array index could become negative
text[s] is a signed char, so using that as index into the font8x16 array
can result in negative indices. Cast it to u8 to be safe.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>      # for v4.7 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 06:23:06 -05:00
Hans Verkuil 62dcb4f418 media: vb2: check memory model for VIDIOC_CREATE_BUFS
vb2_core_create_bufs did not check if the memory model for newly added
buffers is the same as for already existing buffers. It should return an
error if they aren't the same.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+e1fb118a2ebb88031d21@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>      # for v4.16 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 06:21:27 -05:00
Hans Verkuil cd26d1c4d1 media: vb2: vb2_mmap: move lock up
If a filehandle is dup()ped, then it is possible to close it from one fd
and call mmap from the other. This creates a race condition in vb2_mmap
where it is using queue data that __vb2_queue_free (called from close())
is in the process of releasing.

By moving up the mutex_lock(mmap_lock) in vb2_mmap this race is avoided
since __vb2_queue_free is called with the same mutex locked. So vb2_mmap
now reads consistent buffer data.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: syzbot+be93025dd45dccd8923c@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23 05:54:22 -05:00
Linus Torvalds b3491d8430 media updates for v4.20-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb2F9AAAoJEAhfPr2O5OEVm5YP/Ak53aAEI1oJNequwdTYKc+/
 2xWRpYWREa1g+x4MlqWO+szlPWbGXCUVwye8ii2N/xihLapsKVrLCr/dDd5khsvw
 bDux33BzpU3Ug/ncQKD6ZZv4vVRzG8DMPcpkOwSs0OoboJns6AkHVGCugR32qZsH
 3SH/r1aJce0oK1rrzgbYYZHTvaPshvY2IOLPKrtFmO+73iCVRhpSdWjFsY+q2Alp
 +3Ho/06iQYB2i+enXrwoIKHAYoXArXYbxS2dhaNz+NURrOAytmgfMisvvt67heHx
 IEilE0AcSjjlN/eyOxp+WCZrg9JLXVzZLX6ZnqqM2OEu1AS/XBultJBsGaN0hOiV
 dir2enoHNNOStI40hNSdbumg9I0Txmag2jtpaGyaBnnGmGRJ/JIYegCPRVMLygAf
 HHFHjR4fnRnqZrlh9OGAHaqc9RNlUgFVdlyqFtdyIah+aNeuij3o69mWM35QMLhw
 /0dTXBUXw9aD1dEg1cZ6PdzLWJgDd7n1gIdfzzzzLnzmBwmmhqxW8+evu9qSAXsP
 rnEZuE77HYKVfiacWMwpZK6+lT51STAE8ouo3N8fmaC+4RQmpq0dYXtR8RnlcSUD
 hKpJ6UsIIb5A6xKX7ed8x6FxV14TEEaa042A4eclxsAFiqqkNfWSozqV0vfW5vCD
 2lrsuN3knpfh7XDBSr0y
 =V4X4
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull new experimental media request API from Mauro Carvalho Chehab:
 "A new media request API

  This API is needed to support device drivers that can dynamically
  change their parameters for each new frame. The latest versions of
  Google camera and codec HAL depends on such feature.

  At this stage, it supports only stateless codecs.

  It has been discussed for a long time (at least over the last 3-4
  years), and we finally reached to something that seem to work.

  This series contain both the API and core changes required to support
  it and a new m2m decoder driver (cedrus).

  As the current API is still experimental, the only real driver using
  it (cedrus) was added at staging[1]. We intend to keep it there for a
  while, in order to test the API. Only when we're sure that this API
  works for other cases (like encoders), we'll move this driver out of
  staging and set the API into a stone.

  [1] We added support for the vivid virtual driver (used only for
  testing) to it too, as it makes easier to test the API for the ones
  that don't have the cedrus hardware"

* tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits)
  media: dt-bindings: Document the Rockchip VPU bindings
  media: platform: Add Cedrus VPU decoder driver
  media: dt-bindings: media: Document bindings for the Cedrus VPU driver
  media: v4l: Add definition for the Sunxi tiled NV12 format
  media: v4l: Add definitions for MPEG-2 slice format and metadata
  media: videobuf2-core: Rework and rename helper for request buffer count
  media: v4l2-ctrls.c: initialize an error return code with zero
  media: v4l2-compat-ioctl32.c: add missing documentation for a field
  media: media-request: update documentation
  media: media-request: EPERM -> EACCES/EBUSY
  media: v4l2-ctrls: improve media_request_(un)lock_for_update
  media: v4l2-ctrls: use media_request_(un)lock_for_access
  media: media-request: add media_request_(un)lock_for_access
  media: vb2: set reqbufs/create_bufs capabilities
  media: videodev2.h: add new capabilities for buffer types
  media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF
  media: v4l2-ctrls: return -EACCES if request wasn't completed
  media: media-request: return -EINVAL for invalid request_fds
  media: vivid: add request support
  media: vivid: add mc
  ...
2018-10-31 10:53:29 -07:00
Hans Verkuil 250854eed5 media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD
When the OSD is on (i.e. vivid displays text on top of the test pattern), and
you enable hflip, then the driver crashes.

The cause turned out to be a division of a negative number by an unsigned value.
You expect that -8 / 2U would be -4, but in reality it is 2147483644 :-(

Fixes: 3e14e7a82c ("vivid-tpg: add hor/vert downsampling support to tpg_gen_text")

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: <stable@vger.kernel.org>      # for v4.1 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-09 08:10:38 -04:00
Bård Eirik Winther 9b48daa7bb media: v4l2-tpg-core: Add 16-bit bayer
Add 16-bit bayer formats to the test pattern generator, namely
  V4L2_PIX_FMT_SRGGB16
  V4L2_PIX_FMT_SGRBG16
  V4L2_PIX_FMT_SGBRG16
  V4L2_PIX_FMT_SBGGR16

Signed-off-by: Bård Eirik Winther <bwinther@cisco.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-09 08:08:15 -04:00
Sean Young 183e19f5b9 media: rc: Remove init_ir_raw_event and DEFINE_IR_RAW_EVENT macros
This can be done with c99 initializers, which makes the code cleaner
and more transparent. It does require gcc 4.6, because of this bug
in earlier versions:

	https://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676

Since commit cafa0010cd ("Raise the minimum required gcc version to
4.6"), this is the case.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04 14:22:27 -04:00
Paul Kocialkowski 515c5a7333 media: videobuf2-core: Rework and rename helper for request buffer count
The helper indicating whether buffers are associated with the request is
reworked and renamed to return the number of associated buffer objects.

This is useful for drivers that need to check how many buffers are in
the request to validate it.

Existing users of the helper don't need particular adaptation since the
meaning of zero/non-zero remains consistent.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24 09:51:37 -04:00
Johan Fjeldtvedt 8ee92410e5 media: vb2: check for sane values from queue_setup
Warn and return error from the reqbufs ioctl when driver sets 0 number
of planes or 0 as plane sizes, as these values don't make any sense.
Checking this here stops obviously wrong values from propagating
further and causing various problems that are hard to trace back to
either of these values being 0.

Signed-off-by: Johan Fjeldtvedt <johfjeld@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24 09:28:41 -04:00
Hans Verkuil db03401824 media: replace ADOBERGB by OPRGB
The CTA-861 standards have been updated to refer to opRGB instead
of AdobeRGB. The official standard is in fact named opRGB, so
switch to that.

The two old defines referring to ADOBERGB in the public API are
put under #ifndef __KERNEL__ and a comment mentions that they are
deprecated.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24 09:21:47 -04:00
Mauro Carvalho Chehab cc1e6315e8 media: replace strcpy() by strscpy()
The strcpy() function is being deprecated upstream. Replace
it by the safer strscpy().

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 13:32:17 -04:00
Mauro Carvalho Chehab c0decac19d media: use strscpy() instead of strlcpy()
The implementation of strscpy() is more robust and safer.

That's now the recommended way to copy NUL terminated strings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 13:32:17 -04:00
Hans Verkuil 15cd442e79 media: media-request: EPERM -> EACCES/EBUSY
If requests are not supported by the driver, then return EACCES, not
EPERM.

If you attempt to mix queueing buffers directly and using requests,
then EBUSY is returned instead of EPERM: once a specific queueing mode
has been chosen the queue is 'busy' if you attempt the other mode
(i.e. direct queueing vs via a request).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 09:57:29 -04:00
Hans Verkuil e5079cf113 media: vb2: set reqbufs/create_bufs capabilities
Set the capabilities field of v4l2_requestbuffers and v4l2_create_buffers.

The various mapping modes were easy, but for signaling the request capability
a new 'supports_requests' bitfield was added to videobuf2-core.h (and set in
vim2m and vivid). Drivers have to set this bitfield for any queue where
requests are supported.

Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 09:51:28 -04:00
Hans Verkuil 648301b456 media: v4l2-tpg: add Z16 support
Z16 support is identical to Y16, so that's easy to add.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 08:36:51 -04:00
Hans Verkuil bd7ae8adec media: v4l2-tpg: show either Y'CbCr or HSV encoding
When logging the current TPG state detect if we are generating
a Y'CbCr or HSV pattern and report one or the other instead of
both, which is confusing.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11 08:34:45 -04:00
Hans Verkuil 9ac8090fda media: videobuf2-v4l2: refuse qbuf if queue uses requests or vv.
Check if the vb2 queue uses requests, and if so refuse to
add buffers that are not part of a request. Also check for
the reverse: a vb2 queue did not use requests, and an attempt
was made to queue a buffer to a request.

We might relax this in the future, but for now just return
-EPERM in that case.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:23:39 -04:00
Hans Verkuil 61add367dd media: videobuf2-core: add uses_requests/qbuf flags
Set the first time a buffer from a request is queued to vb2
(uses_requests) or directly queued (uses_qbuf).
Cleared when the queue is canceled.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:22:56 -04:00
Hans Verkuil 86f6bd3cf1 media: videobuf2-v4l2: add vb2_request_queue/validate helpers
The generic vb2_request_validate helper function checks if
there are buffers in the request and if so, prepares (validates)
all objects in the request.

The generic vb2_request_queue helper function queues all buffer
objects in the validated request.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:22:32 -04:00
Hans Verkuil c07aa48ec5 media: videobuf2-core: add request helper functions
Add a new helper function to tell if a request object is a buffer.

Add a new helper function that returns true if a media_request
contains at least one buffer.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:20:10 -04:00
Hans Verkuil 394dc58880 media: videobuf2-v4l2: integrate with media requests
This implements the V4L2 part of the request support. The main
change is that vb2_qbuf and vb2_prepare_buf now have a new
media_device pointer. This required changes to several drivers
that did not use the vb2_ioctl_qbuf/prepare_buf helper functions.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:19:30 -04:00
Hans Verkuil fd89e0bb6e media: videobuf2-core: integrate with media requests
Buffers can now be prepared or queued for a request.

A buffer is unbound from the request at vb2_buffer_done time or
when the queue is cancelled.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:18:35 -04:00
Hans Verkuil 8e013700bc media: vb2: add init_buffer buffer op
We need to initialize the request_fd field in struct vb2_v4l2_buffer
to -1 instead of the default of 0. So we need to add a new op that
is called when struct vb2_v4l2_buffer is allocated.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-31 11:17:31 -04:00