Commit Graph

18 Commits

Author SHA1 Message Date
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Thomas Gleixner dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
Linus Torvalds e16b396ce3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
  doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
  Update cpuset info & webiste for cgroups
  dcdbas: force SMI to happen when expected
  arch/arm/Kconfig: remove one to many l's in the word.
  asm-generic/user.h: Fix spelling in comment
  drm: fix printk typo 'sracth'
  Remove one to many n's in a word
  Documentation/filesystems/romfs.txt: fixing link to genromfs
  drivers:scsi Change printk typo initate -> initiate
  serial, pch uart: Remove duplicate inclusion of linux/pci.h header
  fs/eventpoll.c: fix spelling
  mm: Fix out-of-date comments which refers non-existent functions
  drm: Fix printk typo 'failled'
  coh901318.c: Change initate to initiate.
  mbox-db5500.c Change initate to initiate.
  edac: correct i82975x error-info reported
  edac: correct i82975x mci initialisation
  edac: correct commented info
  fs: update comments to point correct document
  target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
  ...

Trivial conflict in fs/eventpoll.c (spelling vs addition)
2011-03-18 10:37:40 -07:00
Linus Torvalds 0a95d92c00 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits)
  powerpc/85xx: Fix signedness bug in cache-sram
  powerpc/fsl: 85xx: document cache sram bindings
  powerpc/fsl: define binding for fsl mpic interrupt controllers
  powerpc/fsl_msi: Handle msi-available-ranges better
  drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
  powerpc/85xx: Fix SPE float to integer conversion failure
  powerpc/85xx: Update sata controller compatible for p1022ds board
  ATA: Add FSL sata v2 controller support
  powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable
  powerpc/8xx: remove obsolete mgsuvd board
  powerpc/82xx: rename and update mgcoge board support
  powerpc/83xx: rename and update kmeter1
  powerpc/85xx: Workaroudn e500 CPU erratum A005
  powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x
  powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e
  powerpc/pseries: Disable MSI using new interface if possible
  powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.
  powerpc: core irq_data conversion.
  powerpc: sysdev/xilinx_intc irq_data conversion.
  powerpc: sysdev/uic irq_data conversion.
  ...

Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of
of_platform_driver in arch/powerpc)
2011-03-18 06:31:43 -07:00
Linus Torvalds 514af9f790 Merge branches 'stable/hvc-console', 'stable/gntalloc.v6' and 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/hvc-console' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line.

* 'stable/gntalloc.v6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: gntdev: fix build warning
  xen/p2m/m2p/gnttab: do not add failed grant maps to m2p override
  xen-gntdev: Add cast to pointer
  xen-gntdev: Fix incorrect use of zero handle
  xen: change xen/[gntdev/gntalloc] to default m
  xen-gntdev: prevent using UNMAP_NOTIFY_CLEAR_BYTE on read-only mappings
  xen-gntdev: Avoid double-mapping memory
  xen-gntdev: Avoid unmapping ranges twice
  xen-gntdev: Use map->vma for checking map validity
  xen-gntdev: Fix unmap notify on PV domains
  xen-gntdev: Fix memory leak when mmap fails
  xen/gntalloc,gntdev: Add unmap notify ioctl
  xen-gntalloc: Userspace grant allocation driver
  xen-gntdev: Support mapping in HVM domains
  xen-gntdev: Add reference counting to maps
  xen-gntdev: Use find_vma rather than iterating our vma list manually
  xen-gntdev: Change page limit to be global instead of per-open

* 'stable/balloon' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (24 commits)
  xen-gntdev: Use ballooned pages for grant mappings
  xen-balloon: Add interface to retrieve ballooned pages
  xen-balloon: Move core balloon functionality out of module
  xen/balloon: Remove pr_info's and don't alter retry_count
  xen/balloon: Protect against CPU exhaust by event/x process
  xen/balloon: Migration from mod_timer() to schedule_delayed_work()
  xen/balloon: Removal of driver_pages
2011-03-17 18:16:36 -07:00
Konrad Rzeszutek Wilk bbd5a762b4 xen/hvc: Disable probe_irq_on/off from poking the hvc-console IRQ line.
This fixes a particular nasty racing problem found when using
Xen hypervisor with the console (hvc) output being routed to the
serial port and the serial port receiving data when
probe_irq_off(probe_irq_on) is running.

Specifically the bug manifests itself with:

[    4.470693] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    4.470693] IP: [<ffffffff810a8c65>] handle_IRQ_event+0xe/0xc9
..snip..
[    4.470693] Call Trace:
[    4.470693]  <IRQ>
[    4.470693]  [<ffffffff810aa645>] handle_percpu_irq+0x3c/0x69
[    4.470693]  [<ffffffff8123cda7>] __xen_evtchn_do_upcall+0xfd/0x195
[    4.470693]  [<ffffffff810308cf>] ? xen_restore_fl_direct_end+0x0/0x1
[    4.470693]  [<ffffffff8123d873>] xen_evtchn_do_upcall+0x32/0x47
[    4.470693]  [<ffffffff81034dfe>] xen_do_hypervisor_callback+0x1e/0x30
[    4.470693]  <EOI>
[    4.470693]  [<ffffffff8100922a>] ? hypercall_page+0x22a/0x1000
[    4.470693]  [<ffffffff8100922a>] ? hypercall_page+0x22a/0x1000
[    4.470693]  [<ffffffff810301c5>] ? xen_force_evtchn_callback+0xd/0xf
[    4.470693]  [<ffffffff810308e2>] ? check_events+0x12/0x20
[    4.470693]  [<ffffffff81030889>] ? xen_irq_enable_direct_end+0x0/0x7
[    4.470693]  [<ffffffff810ab0a0>] ? probe_irq_on+0x8f/0x1d7
[    4.470693]  [<ffffffff812b105e>] ? serial8250_config_port+0x7b7/0x9e6
[    4.470693]  [<ffffffff812ad66c>] ? uart_add_one_port+0x11b/0x305

The bug is trigged by three actors working together:
 A). serial_8250_config_port calling
	probe_irq_off(probe_irq_on())
     wherein all of the IRQ handlers are being started and shut off.
     The functions utilize the sleep functions so the minimum time
     they are run is 120 msec.
 B). Xen hypervisor receiving on the serial line any character and
     setting the bits in the event channel - during this 120 msec timeframe.
 C). The hvc API makes a call to 'request_irq' (and hence setting desc->action
     to a valid value), much much later - when user space opens
     /dev/console (hvc_open). To make the console usable during bootup,
     the Xen HVC implementation sets the IRQ chip (and correspondingly
     the event channel) much earlier. The IRQ chip handler that is used
     is the handle_percpu_irq (aaca49642b)

Back to the issue. When A) is being called it ends up calling the
xen_percpu_chip's chip->startup twice and chip->shutdown once. Those
are set to the default_startup and mask_irq (events.c) respectivly.
If (and this seems to depend on what serial concentrator you use), B)
gets data from the serial port it sets in the event channel a pending bit.
When A) calls chip->startup(), the masking of the pending bit, and
unmasking of the event channel mask, and also setting of the upcall_pending
flag is done (since there is data present on the event channel).
If before the 120 msec has elapsed, any IRQ handler (Xen IRQ has one
IRQ handler, which checks the event channels bitmap to figure which one
to call) is called we end up calling the handle_percpu_irq. The
handle_percpu_irq calls desc->action (which is NULL) and we blow up.

Caveats: I could only reproduce this on 2.6.32 pvops. I am not sure
why this is not showing up on 2.6.38 kernel.

The probe_irq_on/off has code to disable poking specific IRQ lines. This is
done by using the set_irq_noprobe() and then we do not have to
worry about the handle_percpu_irq being called before the IRQ action
handler has been installed.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-10 00:57:59 -05:00
Benjamin Herrenschmidt c7704d352d powerpc/pseries: Reduce HVCS driver insanity
The HVCS driver, for those who don't know, is a driver for the "server" side
of the IBM virtual terminal mechanism allowing Linux partitions to act as
terminal servers under IBM PowerVM hypervisor. It's almost never used on
the field at the moment.

However, it's part of our configs, and in its current incarnation, will
allocate the tty driver & major (with 64 minors) and create a kernel thread
whether it's used or not, ie, whether the hypervisor did put a virtual
terminal server device node in the partition or not (or whether running on
a pseries machine or not even).

This in turns causes modern distro's udev's to start trying to open all
those 64 minors at boot, which, since they aren't linked to anything,
causes the driver to spew errors in the kernel log for each of them.

Not nice.

This moves all that initialization to a function which is now only called
the first time a terminal server virtual IO device is actually probed
(that is almost never).

There's still a _LOT_ of cleanup that can be done in this driver, some
simple (almost all printk's statements in there shall either just be
removed or in some case turned into better written & more informative
messages, including using the dev_* variants etc...). This is left as
an exercise for whoever actually cares about that driver.

One could also try to be smart and dispose of all the tty related
resources when the last instance of the VIO server device
is removed (Hotplug anybody ?).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-02 16:50:25 +11:00
Greg Kroah-Hartman f227e08b71 Merge 2.6.38-rc6 into tty-next
This was to resolve a merge issue with drivers/char/Makefile and
drivers/tty/serial/68328serial.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-24 11:36:31 -08:00
Greg Kroah-Hartman bdcffc5a1a tty: move Kconfig entries into drivers/tty from drivers/char
The Kconfig options for the drivers/tty/ files still were hanging around
in the "big" drivers/char/Kconfig file, so move them to the proper
location under drivers/tty and drivers/tty/hvc/

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-22 15:41:47 -08:00
Alan Cox 20b9d17715 tiocmset: kill the file pointer argument
Doing tiocmget was such fun we should do tiocmset as well for the same
reasons

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:52:43 -08:00
Alan Cox 60b33c133c tiocmget: kill off the passing of the struct file
We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:47:33 -08:00
Mike Frysinger 5427bcf5e9 hvc: add Blackfin JTAG console support
This converts the existing bfin_jtag_comm TTY driver to the HVC layer so
that the common HVC code can worry about all of the TTY/polling crap and
leave the Blackfin code to worry about the Blackfin bits.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 11:12:40 -08:00
Paul Bolle 46a1ca7068 hvcs: fix typo in comment
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-15 10:24:53 +01:00
Stephen Boyd 8e6d3fe1af hvc_dcc: Simplify assembly for v6 and v7 ARM
The inline assembly differences for v6 vs. v7 in the hvc_dcc
driver are purely optimizations. On a v7 processor, an mrc with
the pc sets the condition codes to the 28-31 bits of the register
being read. It just so happens that the TX/RX full bits the DCC
driver is testing for are high enough in the register to be put
into the condition codes. On a v6 processor, this "feature" isn't
implemented and thus we have to do the usual read, mask, test
operations to check for TX/RX full.

Since we already test the RX/TX full bits before calling
__dcc_getchar() and __dcc_putchar() we don't actually need to do
anything special for v7 over v6. The only difference is in
hvc_dcc_get_chars(). We would test RX full, poll RX full, and
then read a character from the buffer, whereas now we will test
RX full, read a character from the buffer, and then test RX full
again for the second iteration of the loop. It doesn't seem
possible for the buffer to go from full to empty between testing
the RX full and reading a character. Therefore, replace the v7
versions with the v6 versions and everything works the same.

Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:05:43 -08:00
Stephen Boyd bf73bd35a2 hvc_dcc: Simplify put_chars()/get_chars() loops
Casting and anding with 0xff is unnecessary in
hvc_dcc_put_chars() since buf is already a char[].
__dcc_get_char() can't return an int less than 0 since it only
returns a char. Simplify the if statement in hvc_dcc_get_chars()
to take this into account.

Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:05:43 -08:00
Stephen Boyd a996320146 hvc_dcc: Fix bad code generation by marking assembly volatile
Without marking the asm __dcc_getstatus() volatile my compiler
decides it can cache the value of __ret in a register and then
check the value of it continually in hvc_dcc_put_chars() (I had
to replace get_wait/put_wait with 1 and fixup the branch
otherwise my disassembler barfed on __dcc_(get|put)char).

00000000 <hvc_dcc_put_chars>:
   0:   ee103e11        mrc     14, 0, r3, cr0, cr1, {0}
   4:   e3a0c000        mov     ip, #0  ; 0x0
   8:   e2033202        and     r3, r3, #536870912      ; 0x20000000
   c:   ea000006        b       2c <hvc_dcc_put_chars+0x2c>
  10:   e3530000        cmp     r3, #0  ; 0x0
  14:   1afffffd        bne     10 <hvc_dcc_put_chars+0x10>
  18:   e7d1000c        ldrb    r0, [r1, ip]
  1c:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  20:   2afffffd        bcs     1c <hvc_dcc_put_chars+0x1c>
  24:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  28:   e28cc001        add     ip, ip, #1      ; 0x1
  2c:   e15c0002        cmp     ip, r2
  30:   bafffff6        blt     10 <hvc_dcc_put_chars+0x10>
  34:   e1a00002        mov     r0, r2
  38:   e12fff1e        bx      lr

As you can see, the value of the mrc is checked against
DCC_STATUS_TX (bit 29) and then stored in r3 for later use.
Marking the asm volatile produces the following:

00000000 <hvc_dcc_put_chars>:
   0:   e3a03000        mov     r3, #0  ; 0x0
   4:   ea000007        b       28 <hvc_dcc_put_chars+0x28>
   8:   ee100e11        mrc     14, 0, r0, cr0, cr1, {0}
   c:   e3100202        tst     r0, #536870912  ; 0x20000000
  10:   1afffffc        bne     8 <hvc_dcc_put_chars+0x8>
  14:   e7d10003        ldrb    r0, [r1, r3]
  18:   ee10fe11        mrc     14, 0, pc, cr0, cr1, {0}
  1c:   2afffffd        bcs     18 <hvc_dcc_put_chars+0x18>
  20:   ee000e15        mcr     14, 0, r0, cr0, cr5, {0}
  24:   e2833001        add     r3, r3, #1      ; 0x1
  28:   e1530002        cmp     r3, r2
  2c:   bafffff5        blt     8 <hvc_dcc_put_chars+0x8>
  30:   e1a00002        mov     r0, r2
  34:   e12fff1e        bx      lr

which looks better and actually works. Mark all the inline
assembly in this file as volatile since we don't want the
compiler to optimize away these statements or move them around
in any way.

Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 16:05:43 -08:00
Amit Shah 51df0acc3d virtio: console: Move file back to drivers/char/
Commit 728674a7e4 moved virtio_console.c
to drivers/tty/hvc/ under the perception of this being an hvc driver.
It was such once, but these days it has generic communication
capabilities as well, so move it to drivers/char/.

In the future, the hvc part from this file can be split off and moved
under drivers/tty/hvc/.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 14:43:12 -08:00
Greg Kroah-Hartman 728674a7e4 tty: move hvc drivers to drivers/tty/hvc/
As requested by Arnd Bergmann, the hvc drivers are now
moved to the drivers/tty/hvc/ directory.  The virtio_console.c driver
was also moved, as it required the hvc_console.h file to be able to be
built, and it really is a hvc driver.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-13 12:03:00 -08:00