Commit Graph

11 Commits

Author SHA1 Message Date
Wim Van Sebroeck 7732c6b96f watchdog: sch311x_wdt: Fix Polarity when starting watchdog
Some motherboards like the Advantech ARK3400 documentation
use a non-inverted GPIO pin. We fix this by assuming that
the BIOS will set the Polarity bit for the GPIO correctly
at startup and we keep the Bit-setting intact when we start
and stop the watchdog.

Reported-by: Jean-François Deverge <jf.deverge@gmail.com>
Signed-off-by: Dave Mueller <d.mueller@elsoft.ch>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-07-23 12:50:30 +02:00
Dave Mueller 8f90a3ae8f watchdog: sch311x_wdt.c: Remove RESGEN
The SCH311x chip contains 2 watchdogs. One is the watchdog programmable
by the runtime register at address 0x65-0x68, the other is the watchdog
inside the power on reset generator. This second watchdog has a fixed
timeout value of ~1.6 seconds and is configurable only by the RESGEN
register.

The BIOS normally takes care of the RESGEN watchdog and disables it (at
least) before the OS is booted.

Unfortunately the sch311x_wdt driver clears bit 0 of the RESGEN register
which has the effect that at the latest 1.6 seconds later, a POR is
triggered.

The attached patch fixes this problem by completely removing any
reference to the RESGEN watchdog from the sch311x_wdt driver.

Signed-off-by: Dave Mueller <d.mueller@elsoft.ch>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-05-23 16:17:51 +02:00
Wim Van Sebroeck 86a1e1896c watchdog: nowayout is bool
nowayout is actually a boolean value.
So make it bool for all watchdog device drivers.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27 20:06:02 +02:00
Joe Perches 27c766aaac watchdog: Use pr_<fmt> and pr_<level>
Use the current logging styles.

Make sure all output has a prefix.
Add missing newlines.
Remove now unnecessary PFX, NAME, and miscellaneous other #defines.
Coalesce formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-03-27 19:59:26 +02:00
Wolfram Sang 2fc5d52b21 watchdog: remove empty pm-functions
While checking what watchdog drivers usually do in suspend/resume to
spot common behaviour for the watchdog framework, I found these drivers
which do nothing but add some cruft. Remove it, it is superfluous. New
approaches should probably be done with pm_ops anyway.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-07-26 21:21:16 +00:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Dan Carpenter 6899a8e13f watchdog: sch311x_wdt: fix printk condition
"==" has higher precedence than "&".  Since
if (sch311x_sio_inb(sio_config_port, 0x30) & (0x01 == 0)) is always
false the message is never printed.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14 10:40:21 +00:00
Wim Van Sebroeck a450c786a5 watchdog: sch311x_wdt: Fix LDN active check
if (sch311x_sio_inb(sio_config_port, 0x30) && 0x01 == 0) -> && should be &

Reported-By: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-14 10:39:53 +00:00
Wim Van Sebroeck 4c4b638e37 watchdog: sch311x_wdt.c: set parent before registeriing the misc device in probe() function
Set the paranet of the misc_device before we register the misc_device.

Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Wim Van sebroeck <wim@iguana.be>
2010-08-08 18:21:15 +00:00
Wim Van Sebroeck 42747d712d [WATCHDOG] watchdog_info constify
make the watchdog_info struct const where possible.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-03-07 10:30:57 +00:00
Wim Van Sebroeck 4c6e63bd17 [WATCHDOG] Add SMSC SCH311x Watchdog Timer.
Add a watchdog driver for the hardware watchdog timer on the
SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset.

Tested-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2008-12-31 16:12:47 +00:00