Commit Graph

50 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Daniel Axtens 5df07b74f6 Remove celleb-only SCC PATA drivers
The SCC PATA interface is only used by celleb.
celleb has been dropped [1], so drop the drivers.

[1] http://patchwork.ozlabs.org/patch/451730/

CC: "David S. Miller" <davem@davemloft.net>
CC: linux-ide@vger.kernel.org
CC: Valentin Rothberg <valentinrothberg@gmail.com>
CC: mpe@ellerman.id.au
CC: linuxppc-dev@lists.ozlab.org
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-04-14 13:07:17 -04:00
Guenter Roeck 77da71b3a0 ide: Drop H8/300 driver
Architecture is gone, so there is no need to keep its ide driver around.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-09-16 18:19:04 -07:00
Jean-Christophe PLAGNIOL-VILLARD cf844751fb ARM: at91: drop ide driver in favor of the pata one
Driver at91_ide is broken and should not be fixed: remove it.
Modification of device files that where making use of it. The
PATA driver (pata_at91) is able to replace at91_ide.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-13 18:31:37 +01:00
matt mooney 732f36d82f ide: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-17 14:05:34 +01:00
Bartlomiej Zolnierkiewicz 4465461ece ide: merge ide_arm and ide_generic host drivers
There is no need for a separate ide_arm host driver nowadays
so merge it into ide_generic one.

While at it:
- return -EBUSY from ide_generic_init() if I/O resources are busy
- scale down ide_generic_check_pci_legacy_iobases() for CONFIG_PCI=n

Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31 20:15:24 +02:00
Bartlomiej Zolnierkiewicz 327fa1c294 ide: move error handling code to ide-eh.c (v2)
Do some CodingStyle fixups in <linux/ide.h> while at it.

v2:
Add missing <linux/delay.h> include (reported by Stephen Rothwell).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:47 +01:00
Bartlomiej Zolnierkiewicz 1574cf6cb4 ide: move standard I/O code to ide-io-std.c
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:46 +01:00
Bartlomiej Zolnierkiewicz 7eeaaaa522 ide: move xfer mode tuning code to ide-xfer-mode.c
* Move xfer mode tuning code to ide-xfer-mode.c.

* Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers
  that support xfer mode tuning.

* Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio()
  and ide_set_xfer_rate().

* Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE,
  also add explicit selects for few host drivers that need it.

* Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only
  by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:46 +01:00
Bartlomiej Zolnierkiewicz 11938c9290 ide: move device settings code to ide-devsets.c
Remove stale comment from ide.c while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24 23:22:44 +01:00
Stanislaw Gruszka 6e5f1e1115 ide: add at91_ide driver
This is IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory
Controller with Compact Flash True IDE Mode logic.

Driver have to switch 8/16 bit bus width when accessing Task Tile or Data
Register. Moreover some extra things need to be done when setting PIO mode.
Only PIO mode is used, hardware have no DMA support. If interrupt line is
connected through GPIO extra quirk is needed to cope with fake interrupts.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Andrew Victor <avictor.za@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-05 16:10:58 +01:00
Bartlomiej Zolnierkiewicz a77dcc437c ide: add CS5536 host driver (v3)
This is a port of libata's pata_cs5536.c (written by Martin K. Petersen)
to IDE subsystem.

Changes done while at it:

* Reprogram PIO/MWDMA timings if needed before and after DMA transfer
  (chipset uses shared PIO/MWDMA timings).

* Fix cable detection to report 80-wires cable if BIOS set it for any
  device on a port (IDE core will do drive-side cable detection later).

* Don't disable UDMA while programming PIO timings.

* Simplify PCI/MSR support.

Pros of having IDE host driver in addition to libata's one:

* IDE is much lighter than SCSI+libata, the host driver itself is also
  a bit smaller:

   text    data     bss     dec     hex filename
   1261     496       4    1761     6e1 drivers/ata/pata_cs5536.o
   1242     128       4    1374     55e drivers/ide/cs5536.o

* This allows use of IDE features which are unavailable under libata.

v2:
* Fixes per review from Sergei:
  - simplify dependency check in Kconfig
  - use IDE_DRV_MASK also for ->drive_data
  - disable UDMA when programming MWDMA
  - program new DTC timings only when necessary
  - fix printk() level in cs5536_init_one()

* Fix patch description according to comments from Alan and Sergei.

v3:
* Smarter masking of UDMA bits per Sergei's suggestion.

Cc: Martin K. Petersen <mkp@mkp.net>
Cc: Karl Auerbach <karl@iwl.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02 20:12:23 +01:00
Shane McDonald 391ad1908a Resurrect IT8172 IDE controller driver
Support for the IT8172 IDE controller was removed from the kernel
sometime after 2.6.18.  Support for the only boards that used the IT8172
was removed from the kernel after 2.6.18, as they had never compiled
since 2.6.0.  However, there are a couple of platforms that use this
chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer
in production, and the Linksys NSS4000 Network Attached Storage box,
which is based on the Xiao Hu board.  I am attempting to add support
for the Xiao Hu to the kernel, and this IT8172 IDE controller is the
first bit of code in this effort.

This patch resurrects the IT8172 IDE controller code.  I began with
the 2.6.18 version of the it8172.c file, and have moved it forward so
that it works with the latest version of the kernel.  I have run this
driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and
I have had no problems with it in my configuration.  The attached patch
applies cleanly against 2.6.28.

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: alan@lxorguk.ukuu.org.uk
[bart: s/HWIF(drive)/drive->hwif/]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06 17:21:01 +01:00
Bartlomiej Zolnierkiewicz ebdab07dad ide: move sysfs support to ide-sysfs.c
While at it:
- media_string() -> ide_media_string()

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02 16:12:48 +01:00
Bartlomiej Zolnierkiewicz 7f92b11c1c ide: move legacy ISA/VLB ports handling to ide-legacy.c (v2)
* Move legacy ISA/VLB ports handling from ide-probe.c to ide-legacy.c.

* Add CONFIG_IDE_LEGACY config option to be selected by host drivers
  needing ide-legacy.c.

v2:
Fix CONFIG_IDE_LEGACY not being defined in Kconfig.
(from Takashi Iwai <tiwai@suse.de>)

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29 20:27:37 +01:00
Bartlomiej Zolnierkiewicz e2984c628c ide: move Power Management support to ide-pm.c
There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29 20:27:37 +01:00
Bartlomiej Zolnierkiewicz fa3fd7204e ide: drivers/ide/generic.c -> drivers/ide/ide-pci-generic.c
Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:24:20 +02:00
Atsushi Nemoto 28502848f5 ide: Add tx4938ide driver (v2)
This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode.
It has custom set_pio_mode and some hacks for big endian.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: ralf@linux-mips.org
Cc: sshtylyov@ru.mvista.com
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:08 +02:00
Atsushi Nemoto 3789798923 ide: Add tx4939ide driver (v6)
This is the driver for the Toshiba TX4939 SoC ATA controller.

This controller has standard ATA taskfile registers and DMA
command/status registers, but the register layout is swapped on big
endian.  There are some other endian issue and some special registers
which requires many custom dma_ops/tp_ops routines and build_dmatable.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: ralf@linux-mips.org
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23 23:22:07 +02:00
Bartlomiej Zolnierkiewicz 2bfba3c444 ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21 20:57:23 +02:00
Bartlomiej Zolnierkiewicz 806f80a6fc ide: add generic ATA/ATAPI disk driver
* Add struct ide_disk_ops containing protocol specific methods.

* Add 'struct ide_disk_ops *' to ide_drive_t.

* Convert ide-{disk,floppy} drivers to use struct ide_disk_ops.

* Merge ide-{disk,floppy} drivers into generic ide-gd driver.

While at it:
- ide_disk_init_capacity() -> ide_disk_get_capacity()

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:14 +02:00
Bartlomiej Zolnierkiewicz c84d9bbe7c ide-floppy: factor out generic disk handling code to ide-gd-floppy.c
While at it:
- idefloppy_do_request() -> ide_floppy_do_request()
- idefloppy_end_request() -> ide_floppy_end_request()
- idefloppy_setup() -> ide_floppy_setup()

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:13 +02:00
Bartlomiej Zolnierkiewicz 5fef0e5c02 ide-disk: factor out generic disk handling code to ide-gd.c
While at it:
- IDEDISK_VERSION -> IDE_GD_VERSION
- ide_cacheflush_p() -> ide_disk_flush()
- init_idedisk_capacity() -> ide_disk_init_capacity()
- idedisk_set_doorlock() -> ide_disk_set_doorlock()
- idedisk_setup() -> ide_disk_setup()

- ide_disk_capacity() -> ide_gd_capacity()
- ide_disk_remove() -> ide_gd_remove()
- ide_disk_probe() -> ide_gd_probe()
- ide_disk_resume() -> ide_gd_resume()
- ide_device_shutdown() -> ide_gd_shutdown()
- idedisk_driver -> ide_gd_driver
- idedisk_open() -> ide_gd_open()
- idedisk_release() -> ide_gd_release()
- idedisk_getgeo() -> ide_gd_getgeo()
- idedisk_media_changed() -> ide_gd_media_changed()
- idedisk_revalidate_disk() -> ide_gd_revalidate_disk()
- idedisk_ops -> ide_gd_ops
- idedisk_init() -> ide_gd_init()
- idedisk_exit() -> ide_gd_exit()

There should be no functional changes caused by this patch.

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17 18:09:12 +02:00
Elias Oltmanns 4abdc6ee7c ide: Implement disk shock protection support (v4)
On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD
FEATURE as specified in ATA-7 is issued to the device and processing of
the request queue is stopped thereafter until the specified timeout
expires or user space asks to resume normal operation. This is supposed
to prevent the heads of a hard drive from accidentally crashing onto the
platter when a heavy shock is anticipated (like a falling laptop expected
to hit the floor). Port resets are deferred whenever a device on that
port is in the parked state.

v3:
Elias Oltmanns <eo@nebensachen.de> wrote:
[...]
> >> 1. Make sure that no negative value is being passed to
> >>    jiffies_to_msecs() in ide_park_show().
> >> 2. Drop the superfluous variable hwif in ide_special_rq().
> >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not
> >>    handling a (un)park request.
> >
> > Well, #3 should have been done differently because we donn't want to
> > check for REQ_(UN)?PARK_HEADS more often than is necessary.
> 
> While preparing the backport to 2.6.27, it has just occurred to me that
> we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset()
> because this flag must not be set after *any* sort of access to the
> device.

v4:
Fix a memory leak due to a missing blk_put_request() in
issue_park_cmd(). Additionally, we should plug the queue when enqueueing
the unpark request because there is no guarantee that the park timeout
has not expired by then. Even though the chance for that to happen is
very slim, the request might end up hanging in the queue until the next
I/O operation is queued up. While at it, clean up the code a little:
- make issue_park_cmd() a function of type void since nobody cares for
  the return value anyway;
- use blk_start_queueing() instead of __blk_run_queue() since we don't
  have to worry about recursion;
- remove a superfluous pointer deference in task_no_data_intr().

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Cc: Jeff Garzik <jeff@garzik.org>,
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:50 +02:00
Bartlomiej Zolnierkiewicz 2dbe7e919e ide: move SFF DMA code to ide-dma-sff.c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:47 +02:00
Bartlomiej Zolnierkiewicz 06b89518fa ide-disk: move /proc handling to ide-disk_proc.c (take 3)
While at it:
- idedisk_capacity() -> ide_disk_capacity()
- idedisk_proc[] -> ide_disk_proc[]
- idedisk_settings[] -> ide_disk_settings[]

v2/3:
Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:45 +02:00
Bartlomiej Zolnierkiewicz f87904898e ide-disk: move all ioctl handling to ide-disk_ioctl.c
While at it:
- idedisk_ioctl() -> ide_disk_ioctl()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:45 +02:00
Bartlomiej Zolnierkiewicz b9103da463 ide-floppy: move /proc handling to ide-floppy_proc.c (take 2)
While at it:
- idefloppy_capacity() -> ide_floppy_capacity()
- idefloppy_proc[] -> ide_floppy_proc[]
- idefloppy_settings[] -> ide_floppy_settings[]

v2:
Build fix for CONFIG_IDE_PROC_FS=n from Elias Oltmanns.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:44 +02:00
Bartlomiej Zolnierkiewicz 452a8ed8ce ide: remove CONFIG_BLK_DEV_IDE config option (take 2)
Because hd.c was moved to drivers/block/ this config option
is superfluous now and may be removed.

v2:
Fix drivers/ide/Makefile (noticed by Adrian Bunk).

Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-13 21:39:33 +02:00
Bartlomiej Zolnierkiewicz 0127854d7c ide-floppy: move floppy ioctls handling to ide-floppy_ioctl.c
While at it:

- idefloppy_create_read_capacity_cmd() -> ide_floppy_create_read_capacity_cmd()
- idefloppy_create_mode_sense_cmd() -> ide_floppy_create_mode_sense_cmd()
- idefloppy_create_request_sense_cmd() -> ide_floppy_create_request_sense_cmd()
- idefloppy_create_format_unit_cmd() -> ide_floppy_create_format_unit_cmd()
- idefloppy_get_sfrp_bit() -> ide_floppy_get_sfrp_bit()

Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:38 +02:00
Bartlomiej Zolnierkiewicz 05236ea6df ide: move ioctls handling to ide-ioctls.c
* Move ioctls handling to ide-ioctls.c
  (except HDIO_DRIVE_TASKFILE for now).

* Make ide_{cmd,task}() static.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10 22:39:33 +02:00
Bartlomiej Zolnierkiewicz d0b53f6866 ide: remove stale comments from drivers/ide/Makefile
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 22:53:36 +02:00
Adrian Bunk 453ea3ed0b move ide/legacy/hd.c to drivers/block/
This patch moves hd.c to drivers/block/

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16 20:33:47 +02:00
Adrian Bunk 01c22bfc30 ide/legacy/hd.c: use late_initcall()
Since the later move to drivers/block/ will break the link order,
the module_init() has to become a late_initcall().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: rmk@arm.linux.org.uk
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16 20:33:47 +02:00
Bartlomiej Zolnierkiewicz 9ad5409375 ide: move PIO blacklist to ide-pio-blacklist.c
Move PIO blacklist to ide-pio-blacklist.c.

While at it:

- fix comment

- fix whitespace damage

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16 20:33:39 +02:00
Bartlomiej Zolnierkiewicz f06ab3402a ide: convert ide-timing.h to ide-timings.c library (take 2)
* Don't include ide-timing.h in cs5535 and sis5513 host drivers
  (they don't need it currently).

* Convert ide-timing.h to ide-timings.c library and add CONFIG_IDE_TIMINGS
  config option to be selected by host drivers using the library.

While at it:

- fix ide_timing_find_mode() placement

v2:
* Add missing EXPORT_SYMBOLs. (Stephen Rothwell <sfr@canb.auug.org.au>)

There should be no functional changes caused by this patch.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-16 20:33:37 +02:00
Bartlomiej Zolnierkiewicz 594c16d8dd ide: add ide_transfer_pc() helper
* Add ide-atapi.c file for generic ATAPI support together with
  CONFIG_IDE_ATAPI config option.

* Add generic ide_transfer_pc() helper to ide-atapi.c and then
  convert ide-{floppy,tape,scsi} device drivers to use it.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15 21:21:58 +02:00
Adrian Bunk 3f31b87460 remove the broken ETRAX_IDE driver
ETRAX_IDE was marked as broken last year with the comment
"it doesn't even compile currently".

Remove it since it won't get fixed in the near future.

On Mon, Apr 14, 2008 at 02:50:19PM +0200, Mikael Starvik wrote:
> You can remove it for now and we will resubmit a new if/when we get around
> to fix it.

[bart: ported it over IDE tree]

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Cc: Jesper Nilsson <Jesper.Nilsson@axis.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28 23:44:42 +02:00
Bartlomiej Zolnierkiewicz 2625cd52b6 ide: fix ide_find_port()
* Instead of checking for '->io_ports[IDE_DATA_OFFSET] == 0' check for
  '->chipset == ide_unknown' when looking for an empty ide_hwifs[] slot.

* Do ide-pnp initialization after ide-generic when IDE is built-in
  (ide-pnp is the only user of ide_find_port() which needs such fixup).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:21 +02:00
Bartlomiej Zolnierkiewicz 17802998d2 ide-cd: move code handling cdrom.c IOCTLs to ide-cd_ioctl.c
There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:25 +01:00
Bartlomiej Zolnierkiewicz 972560fb9d ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c
* Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out
  from ide-cd.[c,h].   Add MODULE_ALIAS("ide-cd") to preserve compatibility.

* Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c.

  ide-cd_verbose.c is IDE subsystem independent and may be easily converted
  into generic library usable by other drivers (i.e. libata) if needed.

* Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig
  replacing VERBOSE_IDE_CD_ERRORS define.  Make this config option enabled by
  default and visible only if CONFIG_EMBEDDED is defined.

before the patch:
   text    data     bss     dec     hex filename
  22841     360    1056   24257    5ec1 drivers/ide/ide-cd.o

after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y:
   text    data     bss     dec     hex filename
  22857     360    1056   24273    5ed1 drivers/ide/ide-cd_mod.o

after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n:
   text    data     bss     dec     hex filename
  15091     360    1056   16507    407b drivers/ide/ide-cd_mod.o

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01 23:09:23 +01:00
Bartlomiej Zolnierkiewicz ade2daf9c6 ide: make remaining built-in only IDE host drivers modular (take 2)
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:07 +01:00
Bartlomiej Zolnierkiewicz acfad6e186 ide: add CONFIG_IDE_H8300 config option
Add a separate config option for ide-8300 host driver instead of depending
on CONFIG_H8300.

This change is a preparation for the future changes and also allows ide-h8300
to be disabled if needed.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-27 21:35:54 +01:00
Bartlomiej Zolnierkiewicz ecfd80e4a5 ide: make /proc/ide/ optional
All important information/features should be already available through
sysfs and ioctl interfaces.

Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option,
disabling it makes IDE driver ~5 kB smaller (on x86-32).

While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}()
and remove no longer needed #ifdefs.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10 00:01:09 +02:00
Kou Ishizaki a1067db8eb scc_pata: dependency fix
This patch fixes:
* the dependency of scc_pata on BLK_DEV_IDEDMA_PCI
* incorrect link to ide-core
* move scc_pata from ide/ppc to ide/pci

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Cc: Al Viro <viro@ftp.linux.org.uk>,
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-17 21:57:25 +01:00
Kou Ishizaki bde18a2e1e drivers/ide: PATA driver for Celleb
This is the patch (based on 2.6.19-rc4) for PATA controller of
Toshiba Cell reference set(Celleb). The reference set consists
of Cell, 512MB memory, Super Companion Chip(SCC) and some
peripherals such as HDD, GbE, etc. You can see brief explanation
and picture of Cell reference set at following URLs.

    http://www.toshiba.co.jp/about/press/2005_09/pr2001.htm
    http://cell-industries.com/toshiba_announces.php

We use a drivers/ide driver because its design is more suitable for
SCC IDE controller than libata driver. Since SCC supports only 32bit
read/write, we must override many callbacks of ata_port_operations
by modifying generic helpers. Each time the libata common code is
updated, we must update those modified helpers. It is very hard for us.
But we will try to implement the libata driver as needed.

Signed-off-by: Kou Ishizaki <kou.ishizaki at toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi at toshiba.co.jp>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17 02:40:22 +01:00
Hannes Reinecke e3a59b4d93 ACPI support for IDE devices
This patch implements ACPI integration for generic IDE devices.
The ACPI spec mandates that some methods are called during suspend and
resume. And consequently there most modern Laptops cannot resume
properly without it.

According to the spec, we should call '_GTM' (Get Timing) upon suspend
to store the current IDE adapter settings.
Upon resume we should call '_STM' (Set Timing) to initialize the
adapter with the stored settings; afterwards '_GTF' (Get Taskfile)
should be called which returns a buffer with some IDE initialisation
commands. Those commands should be passed to the drive.

There are two module params which control the behaviour of this patch:

'ide=noacpi'
	Do not call any ACPI methods (Disables any ACPI method calls)
'ide=acpigtf'
	Enable execution of _GTF methods upon resume.
	Has no effect if 'ide=noacpi' is set.
'ide=acpionboot'
	Enable execution of ACPI methods during boot.
	This might be required on some machines if 'ide=acpigtf' is
	selected as some machines modify the _GTF information
	depending on the drive identification passed down with _STM.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:37 +01:00
Ralf Baechle 4237f22901 [IDE] Add driver for Sibyte Swarm evaluation board
This driver supports the IDE port on the Sibyte Swarm evaluation boards
and it's relatives for the BCM1250 family of systems on a chip.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-17 16:23:50 +00:00
Adrian Bunk 10e047b40a [PATCH] drivers/ide/Makefile: kill dead CONFIG_BLK_DEV_IDE_TCQ entry
This patch kills the dead CONFIG_BLK_DEV_IDE_TCQ entry.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-07-03 17:44:10 +02:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00