Commit Graph

9 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Martin Brandenburg
382f4581e6 orangefs: rewrite readdir to fix several bugs
In the past, readdir assumed that the user buffer will be large enough
that all entries from the server will fit.  If this was not true,
entries would be skipped.

Since it works now, request 512 entries rather than 96 per server
operation.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2017-04-26 14:33:00 -04:00
Martin Brandenburg
482664ddba orangefs: add features op
This is a new userspace operation, which will be done if the client-core
version is greater than or equal to 2.9.6. This will provide a way to
implement optional features and to determine which features are
supported by the client-core. If the client-core version is older than
2.9.6, no optional features are supported and the op will not be done.

The intent is to allow protocol extensions without relying on the
client-core's current behavior of ignoring what it doesn't understand.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2016-08-12 15:12:54 -04:00
Martin Brandenburg
680908e504 orangefs: turn param response value into union
This will support a upcoming request where two related values need to be
updated atomically.

This was done without a union in the OrangeFS server source already. Since
that will break the kernel protocol, it has been fixed there and done here
in a way that does not break the kernel protocol.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2016-08-08 15:12:28 -04:00
Martin Brandenburg
47b4948fdb orangefs: use ORANGEFS_NAME_LEN everywhere; remove ORANGEFS_NAME_MAX
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-02-24 17:07:50 -05:00
Yi Liu
8bb8aefd5a OrangeFS: Change almost all instances of the string PVFS2 to OrangeFS.
OrangeFS was formerly known as PVFS2 and retains the name in many places.

I leave the device /dev/pvfs2-req since this affects userspace.

I leave the filesystem type pvfs2 since this affects userspace. Further
the OrangeFS sysint library reads fstab for an entry of type pvfs2
independently of kernel mounts.

I leave extended attribute keys user.pvfs2 and system.pvfs2 as the
sysint library understands these.

I leave references to userspace binaries still named pvfs2.

I leave the filenames.

Signed-off-by: Yi Liu <yi9@clemson.edu>
[martin@omnibond.com: clairify above constraints and merge]
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-12-03 14:45:44 -05:00
Martin Brandenburg
f0ed4418d4 Orangefs: Remove upcall trailers which are not used.
Also removes remnants of iox (readx/writex) which previously used
trailers, but no longer exist.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-11-13 14:43:11 -05:00
Mike Marshall
548049495c Orangefs: fix some checkpatch.pl complaints that had creeped in.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-10-05 13:44:24 -04:00
Mike Marshall
f7ab093f74 Orangefs: kernel client part 1
OrangeFS (formerly PVFS) is an lgpl licensed userspace networked parallel
file system. OrangeFS can be accessed through included system utilities,
user integration libraries, MPI-IO and can be used by the Hadoop
ecosystem as an alternative to the HDFS filesystem. OrangeFS is used
widely for parallel science, data analytics and engineering applications.

While applications often don't require Orangefs to be mounted into
the VFS, users do like to be able to access their files in the normal way.
The Orangefs kernel client allows Orangefs filesystems to be mounted as
a VFS. The kernel client communicates with a userspace daemon which in
turn communicates with the Orangefs server daemons that implement the
filesystem. The server daemons (there's almost always more than one)
need not be running on the same host as the kernel client.

Orangefs filesystems can also be mounted with FUSE, and we
ship code and instructions to facilitate that, but most of our users
report preferring to use our kernel module instead. Further, as an example
of a problem we can't solve with fuse, we have in the works a
not-yet-ready-for-prime-time version of a file_operations lock function
that accounts for the server daemons being distributed across more
than one running kernel.

Many people and organizations, including Clemson University,
Argonne National Laboratories and Acxiom Corporation have
helped to create what has become Orangefs over more than twenty
years. Some of the more recent contributors to the kernel client
include:

  Mike Marshall
  Christoph Hellwig
  Randy Martin
  Becky Ligon
  Walt Ligon
  Michael Moore
  Rob Ross
  Phil Carnes

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2015-10-03 11:39:53 -04:00