Commit Graph

103 Commits

Author SHA1 Message Date
Linus Torvalds 5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Al Viro ac14a95b52 convert ext3 to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:03 -04:00
Christoph Hellwig 1025774ce4 remove inode_setattr
Replace inode_setattr with opencoded variants of it in all callers.  This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

 spufs: explicitly checks for ATTR_SIZE earlier
 btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
 ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:37 -04:00
Christoph Hellwig 6e1db88d53 introduce __block_write_begin
Split up the block_write_begin implementation - __block_write_begin is a new
trivial wrapper for block_prepare_write that always takes an already
allocated page and can be either called from block_write_begin or filesystem
code that already has a page allocated.  Remove the handling of already
allocated pages from block_write_begin after switching all callers that
do it to __block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:32 -04:00
Christoph Hellwig eafdc7d190 sort out blockdev_direct_IO variants
Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence.  This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway.  Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:29 -04:00
Jan Kara 5f11e6a440 ext3: Fix dirtying of journalled buffers in data=journal mode
In data=journal mode, we still use block_write_begin() to prepare page for
writing. This function can occasionally mark buffer dirty which violates
journalling assumptions - when a buffer is part of a transaction, it should be
dirty and a buffer can be already part of a forget list of some transaction
when block_write_begin() gets called. This violation of journalling assumptions
then results in "JBD: Spotted dirty metadata buffer..." warnings.

In fact, temporary dirtying the buffer while the page is still locked does not
really cause problems to the journalling because we won't write the buffer
until the page gets unlocked. So we just have to make sure to clear dirty bits
before unlocking the page.

Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-08-05 21:28:28 +02:00
Jan Kara f25f624263 ext3: Avoid filesystem corruption after a crash under heavy delete load
It can happen that ext3_free_branches calls ext3_forget() for an indirect block
in an earlier transaction than a transaction in which we clear pointer to this
indirect block. Thus if we crash before a transaction clearing the block
pointer is committed, we will see indirect block pointing to already freed
blocks and complain during orphan list cleanup.

The fix is simple: Make sure ext3_forget() is called in the transaction
doing block pointer clearing.

This is a backport of an ext4 fix by Amir G. <amir73il@users.sourceforge.net>

Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:04:26 +02:00
Christoph Hellwig 4c4d390122 ext3: remove vestiges of nobh support
The nobh option was only supported for writeback mode, but given that all
write paths (except mmapped writed) actually create buffer heads, it
effectively was a no-op already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-07-21 16:01:47 +02:00
Dmitry Monakhov 12755627bd quota: unify quota init condition in setattr
Quota must being initialized if size or uid/git changes requested.
But initialization performed in two different places:
in case of i_size file system is responsible for dquot init
, but in case of uid/gid init will be called internally in
dquot_transfer().
This ambiguity makes code harder to understand.
Let's move this logic to one common helper function.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-05-21 19:30:45 +02:00
Linus Torvalds de329820e9 ext3: fix broken handling of EXT3_STATE_NEW
In commit 9df93939b7 ("ext3: Use bitops to read/modify
EXT3_I(inode)->i_state") ext3 changed its internal 'i_state' variable to
use bitops for its state handling.  However, unline the same ext4
change, it didn't actually change the name of the field when it changed
the semantics of it.

As a result, an old use of 'i_state' remained in fs/ext3/ialloc.c that
initialized the field to EXT3_STATE_NEW.  And that does not work
_at_all_ when we're now working with individually named bits rather than
values that get masked.  So the code tried to mark the state to be new,
but in actual fact set the field to EXT3_STATE_JDATA.  Which makes no
sense at all, and screws up all the code that checks whether the inode
was newly allocated.

In particular, it made the xattr code unhappy, and caused various random
behavior, like apparently

	https://bugzilla.redhat.com/show_bug.cgi?id=577911

So fix the initialization, and rename the field to match ext4 so that we
don't have this happen again.

Cc: James Morris <jmorris@namei.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Daniel J Walsh <dwalsh@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-29 14:30:19 -07:00
Linus Torvalds e213e26ab3 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
  quota: stop using QUOTA_OK / NO_QUOTA
  dquot: cleanup dquot initialize routine
  dquot: move dquot initialization responsibility into the filesystem
  dquot: cleanup dquot drop routine
  dquot: move dquot drop responsibility into the filesystem
  dquot: cleanup dquot transfer routine
  dquot: move dquot transfer responsibility into the filesystem
  dquot: cleanup inode allocation / freeing routines
  dquot: cleanup space allocation / freeing routines
  ext3: add writepage sanity checks
  ext3: Truncate allocated blocks if direct IO write fails to update i_size
  quota: Properly invalidate caches even for filesystems with blocksize < pagesize
  quota: generalize quota transfer interface
  quota: sb_quota state flags cleanup
  jbd: Delay discarding buffers in journal_unmap_buffer
  ext3: quota_write cross block boundary behaviour
  quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
  quota: split out compat_sys_quotactl support from quota.c
  quota: split out netlink notification support from quota.c
  quota: remove invalid optimization from quota_sync_all
  ...

Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
2010-03-05 13:20:53 -08:00
Christoph Hellwig a9185b41a4 pass writeback_control to ->write_inode
This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-05 13:25:52 -05:00
Christoph Hellwig 871a293155 dquot: cleanup dquot initialize routine
Get rid of the initialize dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_initialize helper to __dquot_initialize
and vfs_dq_init to dquot_initialize to have a consistent namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig 907f4554e2 dquot: move dquot initialization responsibility into the filesystem
Currently various places in the VFS call vfs_dq_init directly.  This means
we tie the quota code into the VFS.  Get rid of that and make the
filesystem responsible for the initialization.   For most metadata operations
this is a straight forward move into the methods, but for truncate and
open it's a bit more complicated.

For truncate we currently only call vfs_dq_init for the sys_truncate case
because open already takes care of it for ftruncate and open(O_TRUNC) - the
new code causes an additional vfs_dq_init for those which is harmless.

For open the initialization is moved from do_filp_open into the open method,
which means it happens slightly earlier now, and only for regular files.
The latter is fine because we don't need to initialize it for operations
on special files, and we already do it as part of the namespace operations
for directories.

Add a dquot_file_open helper that filesystems that support generic quotas
can use to fill in ->open.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:30 +01:00
Christoph Hellwig b43fa8284d dquot: cleanup dquot transfer routine
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.

Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:29 +01:00
Christoph Hellwig 5dd4056db8 dquot: cleanup space allocation / freeing routines
Get rid of the alloc_space, free_space, reserve_space, claim_space and
release_rsv dquot operations - they are always called from the filesystem
and if a filesystem really needs their own (which none currently does)
it can just call into it's own routine directly.

Move shared logic into the common __dquot_alloc_space,
dquot_claim_space_nodirty and __dquot_free_space low-level methods,
and rationalize the wrappers around it to move as much as possible
code into the common block for CONFIG_QUOTA vs not.  Also rename
all these helpers to be named dquot_* instead of vfs_dq_*.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:28 +01:00
Dmitry Monakhov 49792c806d ext3: add writepage sanity checks
- There is theoretical possibility to perform writepage on
   RO superblock. Add explicit check for what case.
- Page must being locked before writepage.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:27 +01:00
Jan Kara 7eb4969e04 ext3: Truncate allocated blocks if direct IO write fails to update i_size
We have to truncate blocks allocated to file during direct IO when we
fail to update i_size properly.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:27 +01:00
Jan Kara 9df93939b7 ext3: Use bitops to read/modify EXT3_I(inode)->i_state
At several places we modify EXT3_I(inode)->i_state without holding i_mutex
(ext3_release_file, ext3_bmap, ext3_journalled_writepage, ext3_do_update_inode,
...). These modifications are racy and we can lose updates to i_state. So
convert handling of i_state to use bitops which are atomic.

Signed-off-by: Jan Kara <jack@suse.cz>
2010-03-05 00:20:20 +01:00
Dmitry Monakhov c459001fa4 ext3: quota macros cleanup [V2]
Currently all quota block reservation macros contains hardcoded "2"
aka MAXQUOTAS value. This is no good because in some places it is not
obvious to understand what does this digit represent. Let's introduce
new macro with self descriptive name.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-23 13:33:54 +01:00
Jan Kara 68eb3db083 ext3: Fix data / filesystem corruption when write fails to copy data
When ext3_write_begin fails after allocating some blocks or
generic_perform_write fails to copy data to write, we truncate blocks already
instantiated beyond i_size. Although these blocks were never inside i_size, we
have to truncate pagecache of these blocks so that corresponding buffers get
unmapped. Otherwise subsequent __block_prepare_write (called because we are
retrying the write) will find the buffers mapped, not call ->get_block, and
thus the page will be backed by already freed blocks leading to filesystem and
data corruption.

Reported-by: James Y Knight <foom@fuhm.net>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-10 15:02:55 +01:00
Jiri Kosina d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
Uwe Kleine-König bf48aabb89 tree-wide: fix typos "offest" -> "offset"
This patch was generated by

	git grep -E -i -l 'offest' | xargs -r perl -p -i -e 's/offest/offset/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:50 +01:00
Jan Kara fe8bc91c4c ext3: Wait for proper transaction commit on fsync
We cannot rely on buffer dirty bits during fsync because pdflush can come
before fsync is called and clear dirty bits without forcing a transaction
commit. What we do is that we track which transaction has last changed
the inode and which transaction last changed allocation and force it to
disk on fsync.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2009-11-11 15:22:49 +01:00
Eric Sandeen ea0174a713 ext3: retry failed direct IO allocations
On a 256M 4k block filesystem, doing this in a loop:

    dd if=/dev/zero of=test oflag=direct bs=1M count=64
    rm -f test

eventually leads to spurious ENOSPC:

    dd: writing `test': No space left on device

As with other block allocation callers, it looks like we need to
potentially retry the allocations on the initial ENOSPC.

A similar patch went into ext4 (commit
fbbf694566)

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-11-11 15:22:49 +01:00
Linus Torvalds db16826367 Merge branch 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits)
  HWPOISON: Enable error_remove_page on btrfs
  HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs
  HWPOISON: Add madvise() based injector for hardware poisoned pages v4
  HWPOISON: Enable error_remove_page for NFS
  HWPOISON: Enable .remove_error_page for migration aware file systems
  HWPOISON: The high level memory error handler in the VM v7
  HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process
  HWPOISON: shmem: call set_page_dirty() with locked page
  HWPOISON: Define a new error_remove_page address space op for async truncation
  HWPOISON: Add invalidate_inode_page
  HWPOISON: Refactor truncate to allow direct truncating of page v2
  HWPOISON: check and isolate corrupted free pages v2
  HWPOISON: Handle hardware poisoned pages in try_to_unmap
  HWPOISON: Use bitmask/action code for try_to_unmap behaviour
  HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2
  HWPOISON: Add poison check to page fault handling
  HWPOISON: Add basic support for poisoned pages in fault handler v3
  HWPOISON: Add new SIGBUS error codes for hardware poison signals
  HWPOISON: Add support for poison swap entries v2
  HWPOISON: Export some rmap vma locking to outside world
  ...
2009-09-24 07:53:22 -07:00
Chris Mason 4f003fd32b ext3: Add locking to ext3_do_update_inode
I've been struggling with this off and on while I've been testing the
data=guarded work.  The symptom is corrupted orphan lists and inodes
with the wrong i_size stored on disk.  I was convinced the
data=guarded code was just missing a call to ext3_mark_inode_dirty, but
tracing showed the i_disksize I was sending to ext3_mark_inode_dirty
wasn't actually making it to the drive.

ext3_mark_inode_dirty can be called without locks held (atime updates
and a few others), so the data=guarded code uses locks while updating
the in-memory inode, and then calls ext3_mark_inode_dirty
without any locks held.

But, ext3_mark_inode_dirty has no internal locking to make sure that
only one CPU is updating the buffer head at a time.  Generally this
works out ok because everyone that changes the inode then calls
ext3_mark_inode_dirty themselves.  Even though it races, eventually
someone updates the buffer heads and things move on.

But there is still a risk of the wrong values getting in, and the
data=guarded code seems to hit the race very often.

Since everyone that changes the inode also logs it, it should be
possible to fix this with some memory barriers.  I'll leave that as an
exercise to the reader and lock the buffer head instead.

It it probably a good idea to have a different patch series for lockless
bit flipping on the ext3 i_state field.  ext3_do_update_inode &= clears
EXT3_STATE_NEW without any locks held.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-16 17:44:11 +02:00
Jan Kara 00171d3c7e ext3: Fix possible deadlock between ext3_truncate() and ext3_get_blocks()
During truncate we are sometimes forced to start a new transaction as the
amount of blocks to be journaled is both quite large and hard to predict. So
far we restarted a transaction while holding truncate_mutex and that violates
lock ordering because truncate_mutex ranks below transaction start (and it
can lead to a real deadlock with ext3_get_blocks() allocating new blocks
from ext3_writepage()).

Luckily, the problem is easy to fix: We just drop the truncate_mutex before
restarting the transaction and acquire it afterwards. We are safe to do this as
by the time ext3_truncate() is called, all the page cache for the truncated
part of the file is dropped and so writepage() cannot come and allocate new
blocks in the part of the file we are truncating. The rest of writers is
stopped by us holding i_mutex.

Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-16 17:44:11 +02:00
Andi Kleen aa261f549d HWPOISON: Enable .remove_error_page for migration aware file systems
Enable removing of corrupted pages through truncation
for a bunch of file systems: ext*, xfs, gfs2, ocfs2, ntfs
These should cover most server needs.

I chose the set of migration aware file systems for this
for now, assuming they have been especially audited.
But in general it should be safe for all file systems
on the data area that support read/write and truncate.

Caveat: the hardware error handler does not take i_mutex
for now before calling the truncate function. Is that ok?

Cc: tytso@mit.edu
Cc: hch@infradead.org
Cc: mfasheh@suse.com
Cc: aia21@cantab.net
Cc: hugh.dickins@tiscali.co.uk
Cc: swhiteho@redhat.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2009-09-16 11:50:16 +02:00
Jan Kara 43237b5490 ext3: Get rid of extenddisksize parameter of ext3_get_blocks_handle()
Get rid of extenddisksize parameter of ext3_get_blocks_handle(). This seems to
be a relict from some old days and setting disksize in this function does not
make much sence. Currently it was set only by ext3_getblk().  Since the
parameter has some effect only if create == 1, it is easy to check that the
three callers which end up calling ext3_getblk() with create == 1 (ext3_append,
ext3_quota_write, ext3_mkdir) do the right thing and set disksize themselves.

Signed-off-by: Jan Kara <jack@suse.cz>
2009-07-15 21:30:46 +02:00
Jan Kara 9eaaa2d575 ext3: Fix truncation of symlinks after failed write
Contents of long symlinks is written via standard write methods. So when the
write fails, we add inode to orphan list. But symlinks don't have .truncate
method defined so nobody properly removes them from the orphan list (both on
disk and in memory).

Fix this by calling ext3_truncate() directly instead of calling vmtruncate()
(which is saner anyway since we don't need anything vmtruncate() does except
from calling .truncate in these paths).  We also add inode to orphan list only
if ext3_can_truncate() is true (currently, it can be false for symlinks when
there are no blocks allocated) - otherwise orphan list processing will complain
and ext3_truncate() will not remove inode from on-disk orphan list.

Signed-off-by: Jan Kara <jack@suse.cz>
2009-07-15 21:28:07 +02:00
Al Viro 6582a0e6f6 switch ext3 to inode->i_acl
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 08:17:04 -04:00
Jan Kara ef43618a47 ext3: make sure inode is deleted from orphan list after truncate
As Ted pointed out, it can happen that ext3_truncate() returns without
removing inode from orphan list.  This way we could in some rare cases
(like when we get ENOMEM from an allocation in ext3_truncate called
because of failed ext3_write_begin) leave the inode on orphan list and
that triggers assertion failure on umount.

So make ext3_truncate() always remove inode from in-memory orphan list.

Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:45 -07:00
Jan Kara e8ef7aaea7 ext3: fix chain verification in ext3_get_blocks()
Chain verification in ext3_get_blocks() has been hosed since it called
verify_chain(chain, NULL) which always returns success.  As a result
readers could in theory race with truncate.  On the other hand the race
probably cannot happen with the current locking scheme, since by the
time ext3_truncate() is called all the pages are already removed and
hence get_block() shouldn't be called on such pages...

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:45 -07:00
Christoph Hellwig ca41f7b918 ext3: remove ->write_super and stop maintaining ->s_dirt
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-11 21:36:05 -04:00
Jan Kara 430db323fa ext3: Try to avoid starting a transaction in writepage for data=writepage
This does the same as commit 9e80d40773
(avoid starting a transaction when no block allocation is needed)
but for data=writeback mode of ext3. We also cleanup the data=ordered
case a bit to stick to coding style...

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-04-08 13:15:10 -04:00
Linus Torvalds 20bec8ab14 Merge branch 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'ext3-latency-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: Add replace-on-rename hueristics for data=writeback mode
  ext3: Add replace-on-truncate hueristics for data=writeback mode
  ext3: Use WRITE_SYNC for commits which are caused by fsync()
  block_write_full_page: Use synchronous writes for WBC_SYNC_ALL writebacks
2009-04-03 11:10:33 -07:00
Theodore Ts'o f7ab34ea72 ext3: Add replace-on-truncate hueristics for data=writeback mode
In data=writeback mode, start an asynchronous flush when closing a
file which had been previously truncated down to zero.  This lowers
the probability of data loss in the case of applications that attempt
to replace a file using truncate.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-04-03 01:34:35 -04:00
Jan Kara 695f6ae0dc ext3: avoid false EIO errors
Sometimes block_write_begin() can map buffers in a page but later we
fail to copy data into those buffers (because the source page has been
paged out in the mean time).  We then end up with !uptodate mapped
buffers.  To add a bit more to the confusion, block_write_end() does
not commit any data (and thus does not any mark buffers as uptodate) if
we didn't succeed with copying all the data.

Commit f4fc66a894 (ext3: convert to new
aops) missed these cases and thus we were inserting non-uptodate
buffers to transaction's list which confuses JBD code and it reports IO
errors, aborts a transaction and generally makes users afraid about
their data ;-P.

This patch fixes the problem by reorganizing ext3_..._write_end() code
to first call block_write_end() to mark buffers with valid data
uptodate and after that we file only uptodate buffers to transaction's
lists.

We also fix a problem where we could leave blocks allocated beyond i_size
(i_disksize in fact) because of failed write. We now add inode to orphan
list when write fails (to be safe in case we crash) and then truncate blocks
beyond i_size in a separate transaction.

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:04:52 -07:00
Linus Torvalds 2c9e15a011 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6: (27 commits)
  ext2: Zero our b_size in ext2_quota_read()
  trivial: fix typos/grammar errors in fs/Kconfig
  quota: Coding style fixes
  quota: Remove superfluous inlines
  quota: Remove uppercase aliases for quota functions.
  nfsd: Use lowercase names of quota functions
  jfs: Use lowercase names of quota functions
  udf: Use lowercase names of quota functions
  ufs: Use lowercase names of quota functions
  reiserfs: Use lowercase names of quota functions
  ext4: Use lowercase names of quota functions
  ext3: Use lowercase names of quota functions
  ext2: Use lowercase names of quota functions
  ramfs: Remove quota call
  vfs: Use lowercase names of quota functions
  quota: Remove dqbuf_t and other cleanups
  quota: Remove NODQUOT macro
  quota: Make global quota locks cacheline aligned
  quota: Move quota files into separate directory
  ext4: quota reservation for delayed allocation
  ...
2009-03-27 14:48:34 -07:00
Jan Kara 9e80d40773 ext3: Avoid starting a transaction in writepage when not necessary
We don't have to start a transaction in writepage() when all the blocks
are a properly allocated. Even in ordered mode either the data has been
written via write() and they are thus already added to transaction's list
or the data was written via mmap and then it's random in which transaction
they get written anyway.

This should help VM to pageout dirty memory without blocking on transaction
commits.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-26 15:44:59 -07:00
Jan Kara 81a0522739 ext3: Use lowercase names of quota functions
Use lowercase names of quota functions instead of old uppercase ones.

Signed-off-by: Jan Kara <jack@suse.cz>
CC: linux-ext4@vger.kernel.org
2009-03-26 02:18:36 +01:00
Nick Piggin 54566b2c15 fs: symlink write_begin allocation context fix
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened.  They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim.  This bug could
cause filesystem deadlocks.

The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called.  It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock.  The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.

Add a new flag for write_begin, AOP_FLAG_NOFS.  Filesystems can now act on
this flag in their write_begin function.  Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).

This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg.  ocfs2_alloc_write_ctxt, for a
random example).

[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
  untouched to the grab_cache_page_write_begin() function.  That
  just simplifies everybody, and may even allow future expansion of the
  logic.   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04 13:33:20 -08:00
Duane Griffin b5ed3112b5 ext3: ensure fast symlinks are NUL-terminated
Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-31 18:07:39 -05:00
Aneesh Kumar K.V 5ec8b75e3a ext3: truncate block allocated on a failed ext3_write_begin
For blocksize < pagesize we need to remove blocks that got allocated in
block_write_begin() if we fail with ENOSPC for later blocks.
block_write_begin() internally does this if it allocated page locally.
This makes sure we don't have blocks outside inode.i_size during ENOSPC.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:38 -07:00
Josef Bacik 68c9d702bb generic block based fiemap implementation
Any block based fs (this patch includes ext3) just has to declare its own
fiemap() function and then call this generic function with its own
get_block_t. This works well for block based filesystems that will map
multiple contiguous blocks at one time, but will work for filesystems that
only map one block at a time, you will just end up with an "extent" for each
block. One gotcha is this will not play nicely where there is hole+data
after the EOF. This function will assume its hit the end of the data as soon
as it hits a hole after the EOF, so if there is any data past that it will
not pick that up. AFAIK no block based fs does this anyway, but its in the
comments of the function anyway just in case.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
2008-10-03 17:32:43 -04:00
Hisashi Hifumi 8ab22b9abb vfs: pagecache usage optimization for pagesize!=blocksize
When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.

I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment.  Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.

So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate.  This can
reduce read IO and improve system throughput.

I wrote a benchmark program and got result number with this program.

This benchmark do:

  1: mount and open a test file.

  2: create a 512MB file.

  3: close a file and umount.

  4: mount and again open a test file.

  5: pwrite randomly 300000 times on a test file.  offset is aligned
     by IO size(1024bytes).

  6: measure time of preading randomly 100000 times on a test file.

The result was:
	2.6.26
        330 sec

	2.6.26-patched
        226 sec

Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB

On ext3/4, a file is written through buffer/block.  So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment.  This test result
showed this.

The benchmark program is as follows:

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>

#define LEN 1024
#define LOOP 1024*512 /* 512MB */

main(void)
{
	unsigned long i, offset, filesize;
	int fd;
	char buf[LEN];
	time_t t1, t2;

	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
		perror("cannot mount\n");
		exit(1);
	}
	memset(buf, 0, LEN);
	fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
	if (fd < 0) {
		perror("cannot open file\n");
		exit(1);
	}
	for (i = 0; i < LOOP; i++)
		write(fd, buf, LEN);
	close(fd);
	if (umount("/root/test1/") < 0) {
		perror("cannot umount\n");
		exit(1);
	}
	if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
		perror("cannot mount\n");
		exit(1);
	}
	fd = open("/root/test1/testfile", O_RDWR);
	if (fd < 0) {
		perror("cannot open file\n");
		exit(1);
	}

	filesize = LEN * LOOP;
	for (i = 0; i < 300000; i++){
		offset = (random() % filesize) & (~(LEN - 1));
		pwrite(fd, buf, LEN, offset);
	}
	printf("start test\n");
	time(&t1);
	for (i = 0; i < 100000; i++){
		offset = (random() % filesize) & (~(LEN - 1));
		pread(fd, buf, LEN, offset);
	}
	time(&t2);
	printf("%ld sec\n", t2-t1);
	close(fd);
	if (umount("/root/test1/") < 0) {
		perror("cannot umount\n");
		exit(1);
	}
}

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 16:30:21 -07:00
Duane Griffin 3ccc3167b0 ext3: handle deleting corrupted indirect blocks
While freeing indirect blocks we attach a journal head to the parent
buffer head, free the blocks, then journal the parent.  If the indirect
block list is corrupted and points to the parent the journal head will be
detached when the block is cleared, causing an OOPS.

Check for that explicitly and handle it gracefully.

This patch fixes the third case (image hdb.20000057.nullderef.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

Immediately above the change, in the ext3_free_data function, we call
ext3_clear_blocks to clear the indirect blocks in this parent block.  If
one of those blocks happens to actually be the parent block it will clear
b_private / BH_JBD.

I did the check at the end rather than earlier as it seemed more elegant.
I don't think there should be much practical difference, although it is
possible the FS may not be quite so badly corrupted if we did it the other
way (and didn't clear the block at all).  To be honest, I'm not convinced
there aren't other similar failure modes lurking in this code, although I
couldn't find any with a quick review.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:32 -07:00
Hidehiro Kawai 95450f5a7e ext3: don't read inode block if the buffer has a write error
A transient I/O error can corrupt inode data.  Here is the scenario:

(1) update inode_A at the block_B
(2) pdflush writes out new inode_A to the filesystem, but it results
    in write I/O error, at this point, BH_Uptodate flag of the buffer
    for block_B is cleared and BH_Write_EIO is set
(3) create new inode_C which located at block_B, and
    __ext3_get_inode_loc() tries to read on-disk block_B because the
    buffer is not uptodate
(4) if it can read on-disk block_B successfully, inode_A is
    overwritten by old data

This patch makes __ext3_get_inode_loc() not read the inode block if the
buffer has BH_Write_EIO flag.  In this case, the buffer should have the
latest information, so setting the uptodate flag to the buffer (this
avoids WARN_ON_ONCE() in mark_buffer_dirty().)

According to this change, we would need to test BH_Write_EIO flag for the
error checking.  Currently nobody checks write I/O errors on metadata
buffers, but it will be done in other patches I'm working on.

Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: sugita <yumiko.sugita.yf@hitachi.com>
Cc: Satoshi OSHIMA <satoshi.oshima.fk@hitachi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:32 -07:00
Duane Griffin ae76dd9a6b ext3: handle corrupted orphan list at mount
If the orphan node list includes valid, untruncatable nodes with nlink > 0
the ext3_orphan_cleanup loop which attempts to delete them will not do so,
causing it to loop forever. Fix by checking for such nodes in the
ext3_orphan_get function.

This patch fixes the second case (image hdb.20000009.softlockup.gz)
reported in http://bugzilla.kernel.org/show_bug.cgi?id=10882.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: printk warning fix]
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:32 -07:00