Commit Graph

422 Commits

Author SHA1 Message Date
David Howells 4d673da145 afs: Support the AFS dynamic root
Support the AFS dynamic root which is a pseudo-volume that doesn't connect
to any server resource, but rather is just a root directory that
dynamically creates mountpoint directories where the name of such a
directory is the name of the cell.

Such a mount can be created thus:

	mount -t afs none /afs -o dyn

Dynamic root superblocks aren't shared except by bind mounts and
propagation.  Cell root volumes can then be mounted by referring to them by
name, e.g.:

	ls /afs/grand.central.org/
	ls /afs/.grand.central.org/

The kernel will upcall to consult the DNS if the address wasn't supplied
directly.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-02-06 14:43:37 +00:00
David Howells 16280a15be afs: Rearrange afs_select_fileserver() a little
Rearrange afs_select_fileserver() a little to put the use_server chunk
before the next_server chunk so that with the removal of a couple of gotos
the main path through the function is all one sequence.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-02-06 14:43:37 +00:00
David Howells 63dc4e4aa5 afs: Remove unused code
Remove some old unused code.

Signed-off-by: David Howells <dhowells@redhat.com>
2018-02-06 14:43:37 +00:00
David Howells 45df846273 afs: Fix server list handling
Fix server list handling in the following ways:

 (1) In afs_alloc_volume(), remove duplicate server list build code.  This
     was already done by afs_alloc_server_list() which afs_alloc_volume()
     previously called.  This just results in twice as many VL RPCs.

 (2) In afs_deliver_vl_get_entry_by_name_u(), use the number of server
     records indicated by ->nServers in the UVLDB record returned by the
     VL.GetEntryByNameU RPC call rather than scanning all NMAXNSERVERS
     slots.  Unused slots may contain garbage.

 (3) In afs_alloc_server_list(), don't stop converting a UVLDB record into
     a server list just because we can't look up one of the servers.  Just
     skip that server and go on to the next.  If we can't look up any of
     the servers then we'll fail at the end.

Without this patch, an attempt to view the umich.edu root cell using
something like "ls /afs/umich.edu" on a dynamic root (future patch) mount
or an autocell mount will result in ENOMEDIUM.  The failure is due to kafs
not stopping after nServers'worth of records have been read, but then
trying to access a server with a garbage UUID and getting an error, which
aborts the server list build.

Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
2018-02-06 14:36:54 +00:00
David Howells 8305e579c6 afs: Need to clear responded flag in addr cursor
In afs_select_fileserver(), we need to clear the ->responded flag in the
address list when reusing it.  We should also clear it in
afs_select_current_fileserver().

To this end, just memset() the object before initialising it.

Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
2018-02-06 14:36:54 +00:00
David Howells fe4d774c84 afs: Fix missing cursor clearance
afs_select_fileserver() ends the address cursor it is using in the case in
which we get some sort of network error and run out of addresses to iterate
through, before it jumps to try the next server.  This also needs to be
done when the server aborts with some sort of error that means we should
try the next server.

Fix this by:

 (1) Move the iterate_address afs_end_cursor() call to the next_server
     case.

 (2) End the cursor in the failed case.

 (3) Make afs_end_cursor() clear the ->begun flag and ->addr pointer in the
     address cursor.

 (4) Make afs_end_cursor() able to be called on an already cleared cursor.

Without this, something like the following oops may occur:

	AFS: Assertion failed
	18446612134397189888 == 0 is false
	0xffff88007c279f00 == 0x0 is false
	------------[ cut here ]------------
	kernel BUG at fs/afs/rotate.c:360!
	RIP: 0010:afs_select_fileserver+0x79b/0xa30 [kafs]
	Call Trace:
	 afs_statfs+0xcc/0x180 [kafs]
	 ? p9_client_statfs+0x9e/0x110 [9pnet]
	 ? _cond_resched+0x19/0x40
	 statfs_by_dentry+0x6d/0x90
	 vfs_statfs+0x1b/0xc0
	 user_statfs+0x4b/0x80
	 SYSC_statfs+0x15/0x30
	 SyS_statfs+0xe/0x10
	 entry_SYSCALL_64_fastpath+0x20/0x83

Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
2018-02-06 14:36:54 +00:00
David Howells e44150157f afs: Add missing afs_put_cell()
afs_alloc_volume() needs to release the cell ref it obtained in the case of
an error.  Fix this by adding an afs_put_cell() call into the error path.

This can triggered when a lookup for a cell in a dynamic root or an
autocell mount returns an error whilst trying to look up the server (such
as ENOMEDIUM).  This results in an assertion failure oops when the module
is unloaded due to outstanding refs on a cell record.

Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: stable@vger.kernel.org
2018-02-06 14:22:03 +00:00
Linus Torvalds a4b7fd7d34 inode->i_version rework for v4.16
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJabwjlAAoJEAAOaEEZVoIVeEEP/R84kZJjlZV/vNmFFvY46jM+
 0hpMHXRNym+nW1Du1CKNkesEUAY8ACAQIyzJh63Q72341QTDdz3+asHwPYRNOqdC
 PgryidPieojkNKQg+h7dmoKYlYh1xiCicvn66Q5PFb9B0lH36twekOK4X1qqJj8Z
 breRmRoFLka9looMSuYgwbErts023fmASalvGum6T0ZM/7F9hUj4O3OsQtKTLUNM
 VQ+gLJTQrUqrgzvWUwq3WTMa9YAaKP4oad8nsglNSpiVLG7WtURr5HokW9hAziqL
 k99Y+K2ni1wZJlNGJAyV7PyEG2ieI5Xn+LzM2RM+SndD1QHF2QXACmSTDYfL51k5
 G2RsKeTZvQPtX4qx9+vnCp/4oV6JduvCaq2Mt8SQb9nYZxKjs85TNLrARJv+85eQ
 zP0OTxlH1Gfu3j36n3cny4XemyMYYF4hCFYfRPqTGst37fgLBtfIfUSQ6jedoCK2
 Xcyb6ukGXMh6If/A7DSy91hvSSPrWSH7TPPsbfLy6o+wUOtpAGR4eXVlEuAiXrzc
 gnoAz85oIMUQae66LrdrPk1NyE59qOb24g/yU5gyRBSpi2+/aoboNCKaD73tgs/C
 XIMwGXLYmqkcud7IBQF0tHHiM+jsEkbSM4LUqRXSnqMdwNnS18Z4Q+JKqpdP0cii
 eRdenDvUfu8Gu1Y9vWBv
 =iihN
 -----END PGP SIGNATURE-----

Merge tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux

Pull inode->i_version rework from Jeff Layton:
 "This pile of patches is a rework of the inode->i_version field. We
  have traditionally incremented that field on every inode data or
  metadata change. Typically this increment needs to be logged on disk
  even when nothing else has changed, which is rather expensive.

  It turns out though that none of the consumers of that field actually
  require this behavior. The only real requirement for all of them is
  that it be different iff the inode has changed since the last time the
  field was checked.

  Given that, we can optimize away most of the i_version increments and
  avoid dirtying inode metadata when the only change is to the i_version
  and no one is querying it. Queries of the i_version field are rather
  rare, so we can help write performance under many common workloads.

  This patch series converts existing accesses of the i_version field to
  a new API, and then converts all of the in-kernel filesystems to use
  it. The last patch in the series then converts the backend
  implementation to a scheme that optimizes away a large portion of the
  metadata updates when no one is looking at it.

  In my own testing this series significantly helps performance with
  small I/O sizes. I also got this email for Christmas this year from
  the kernel test robot (a 244% r/w bandwidth improvement with XFS over
  DAX, with 4k writes):

    https://lkml.org/lkml/2017/12/25/8

  A few of the earlier patches in this pile are also flowing to you via
  other trees (mm, integrity, and nfsd trees in particular)".

* tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: (22 commits)
  fs: handle inode->i_version more efficiently
  btrfs: only dirty the inode in btrfs_update_time if something was changed
  xfs: avoid setting XFS_ILOG_CORE if i_version doesn't need incrementing
  fs: only set S_VERSION when updating times if necessary
  IMA: switch IMA over to new i_version API
  xfs: convert to new i_version API
  ufs: use new i_version API
  ocfs2: convert to new i_version API
  nfsd: convert to new i_version API
  nfs: convert to new i_version API
  ext4: convert to new i_version API
  ext2: convert to new i_version API
  exofs: switch to new i_version API
  btrfs: convert to new i_version API
  afs: convert to new i_version API
  affs: convert to new i_version API
  fat: convert to new i_version API
  fs: don't take the i_lock in inode_inc_iversion
  fs: new API for handling inode->i_version
  ntfs: remove i_version handling
  ...
2018-01-29 13:33:53 -08:00
Jeff Layton a01179e6eb afs: convert to new i_version API
For AFS, it's generally treated as an opaque value, so we use the
*_raw variants of the API here.

Note that AFS has quite a different definition for this counter. AFS
only increments it on changes to the data to the data in regular files
and contents of the directories. Inode metadata changes do not result
in a version increment.

We'll need to reconcile that somehow if we ever want to present this to
userspace via statx.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29 06:42:20 -05:00
David Howells afae457d87 afs: Fix missing error handling in afs_write_end()
afs_write_end() is missing page unlock and put if afs_fill_page() fails.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-01-02 10:02:19 +00:00
David Howells 440fbc3a8a afs: Fix unlink
Repeating creation and deletion of a file on an afs mount will run the box
out of memory, e.g.:

	dd if=/dev/zero of=/afs/scratch/m0 bs=$((1024*1024)) count=512
	rm /afs/scratch/m0

The problem seems to be that it's not properly decrementing the nlink count
so that the inode can be scrapped.

Note that this doesn't fix local creation followed by remote deletion.
That's harder to handle and will require a separate patch as we're not told
that the file has been deleted - only that the directory has changed.

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-01-02 10:02:19 +00:00
Dan Carpenter 7888da9583 afs: Potential uninitialized variable in afs_extract_data()
Smatch warns that:

    fs/afs/rxrpc.c:922 afs_extract_data()
    error: uninitialized symbol 'remote_abort'.

Smatch is right that "remote_abort" might be uninitialized when we pass
it to afs_set_call_complete().  I don't know if that function uses the
uninitialized variable.  Anyway, the comment for rxrpc_kernel_recv_data(),
says that "*_abort should also be initialised to 0." and this patch does
that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-01-02 10:02:19 +00:00
David Howells f8de483e74 afs: Properly reset afs_vnode (inode) fields
When an AFS inode is allocated by afs_alloc_inode(), the allocated
afs_vnode struct isn't necessarily reset from the last time it was used as
an inode because the slab constructor is only invoked once when the memory
is obtained from the page allocator.

This means that information can leak from one inode to the next because
we're not calling kmem_cache_zalloc().  Some of the information isn't
reset, in particular the permit cache pointer.

Bring the clearances up to date.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
2017-12-01 11:51:24 +00:00
David Howells 1bcab12521 afs: Fix permit refcounting
Fix four refcount bugs in afs_cache_permit():

 (1) When checking the result of the kzalloc(), we can't just return, but
     must put 'permits'.

 (2) We shouldn't put permits immediately after hashing a new permit as we
     need to keep the pointer stable so that we can check to see if
     vnode->permit_cache has changed before we decide whether to assign to
     it.

 (3) 'permits' is being put twice.

 (4) We need to put either the replacement or the thing replaced after the
     assignment to vnode->permit_cache.

Without this, lots of the following are seen:

  Kernel BUG at ffffffffa039857b [verbose debug info unavailable]
  ------------[ cut here ]------------
  Kernel BUG at ffffffffa039858a [verbose debug info unavailable]
  ------------[ cut here ]------------

The addresses are in the .text..refcount section of the kafs.ko module.
Following the relocation records for the __ex_table section shows one to be
due to the decrement in afs_put_permits() and the other to be key_get() in
afs_cache_permit().

Occasionally, the following is seen:

  refcount_t overflow at afs_cache_permit+0x57d/0x5c0 [kafs] in cc1[562], uid/euid: 0/0
  WARNING: CPU: 0 PID: 562 at kernel/panic.c:657 refcount_error_report+0x9c/0xac
  ...

Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
2017-12-01 11:40:43 +00:00
Linus Torvalds 1751e8a6cb Rename superblock flags (MS_xyz -> SB_xyz)
This is a pure automated search-and-replace of the internal kernel
superblock flags.

The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.

Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.

The script to do this was:

    # places to look in; re security/*: it generally should *not* be
    # touched (that stuff parses mount(2) arguments directly), but
    # there are two places where we really deal with superblock flags.
    FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
            include/linux/fs.h include/uapi/linux/bfs_fs.h \
            security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
    # the list of MS_... constants
    SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
          DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
          POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
          I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
          ACTIVE NOUSER"

    SED_PROG=
    for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done

    # we want files that contain at least one of MS_...,
    # with fs/namespace.c and fs/pnode.c excluded.
    L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')

    for f in $L; do sed -i $f $SED_PROG; done

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-27 13:05:09 -08:00
Colin Ian King 43dd388b21 afs: remove redundant assignment of dvnode to itself
The assignment of dvnode to itself is redundant and can be removed.
Cleans up warning detected by cppcheck:

fs/afs/dir.c:975: (warning) Redundant assignment of 'dvnode' to itself.

Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 13:55:46 +00:00
Gustavo A. R. Silva 6832795164 afs: cell: Remove unnecessary code in afs_lookup_cell
Due to recent changes this piece of code is no longer needed.

Addresses-Coverity-ID: 1462033
Link: https://lkml.kernel.org/r/4923.1510957307@warthog.procyon.org.uk
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 13:55:45 +00:00
David Howells 4433b69141 afs: Fix signal handling in some file ops
afs_mkdir(), afs_create(), afs_link() and afs_symlink() all need to drop
the target dentry if a signal causes the operation to be killed immediately
before we try to contact the server.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 13:55:35 +00:00
David Howells bc1527dcb4 afs: Fix some dentry handling in dir ops and missing key_puts
Fix some of dentry handling in AFS directory ops:

 (1) Do d_drop() on the new_dentry before assigning a new inode to it in
     afs_vnode_new_inode().  It's fine to do this before calling afs_iget()
     because the operation has taken place on the server.

 (2) Replace d_instantiate()/d_rehash() with d_add().

 (3) Don't d_drop() the new_dentry in afs_rename() on error.

Also fix afs_link() and afs_rename() to call key_put() on all error paths
where the key is taken.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 10:56:51 +00:00
David Howells 5a039c3227 afs: Make afs_write_begin() avoid writing to a page that's being stored
Make afs_write_begin() wait for a page that's marked PG_writeback because:

 (1) We need to avoid interference with the data being stored so that the
     data on the server ends up in a defined state.

 (2) page->private is used to track the window of dirty data within a page,
     but it's also used by the storage code to track what's being written,
     being cleared by the completion notification.  Ownership can't be
     relinquished by the storage code until completion because it a store
     fails, the data must be remarked dirty.

Tracing shows something like the following (edited):

 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-125
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store+ 0-125
 x86_64-linux-gn-15940 [1] afs_page_dirty: vn=ffff8800bef33800 9c75 begin 0-2052
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 clear 0-2052
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 store 0-0
    kworker/u8:3-114   [2] afs_page_dirty: vn=ffff8800bef33800 9c75 WARN 0-0

The clear (completion) corresponding to the store+ (store continuation from
a previous page) happens between the second begin (afs_write_begin) and the
store corresponding to that.  This results in the second store not seeing
any data to write back, leading to the following warning:

WARNING: CPU: 2 PID: 114 at ../fs/afs/write.c:403 afs_write_back_from_locked_page+0x19d/0x76c [kafs]
Modules linked in: kafs(E)
CPU: 2 PID: 114 Comm: kworker/u8:3 Tainted: G            E   4.14.0-fscache+ #242
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Workqueue: writeback wb_workfn (flush-afs-2)
task: ffff8800cad72600 task.stack: ffff8800cad44000
RIP: 0010:afs_write_back_from_locked_page+0x19d/0x76c [kafs]
RSP: 0018:ffff8800cad47aa0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff8800bef33a20 RCX: 0000000000000000
RDX: 000000000000000f RSI: ffffffff81c5d0e0 RDI: ffff8800cad72e78
RBP: ffff8800d31ea1e8 R08: ffff8800c1358000 R09: ffff8800ca00e400
R10: ffff8800cad47a38 R11: ffff8800c5d9e400 R12: 0000000000000000
R13: ffffea0002d9df00 R14: ffffffffa0023c1c R15: 0000000000007fdf
FS:  0000000000000000(0000) GS:ffff8800ca700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f85ac6c4000 CR3: 0000000001c10001 CR4: 00000000001606e0
Call Trace:
 ? clear_page_dirty_for_io+0x23a/0x267
 afs_writepages_region+0x1be/0x286 [kafs]
 afs_writepages+0x60/0x127 [kafs]
 do_writepages+0x36/0x70
 __writeback_single_inode+0x12f/0x635
 writeback_sb_inodes+0x2cc/0x452
 __writeback_inodes_wb+0x68/0x9f
 wb_writeback+0x208/0x470
 ? wb_workfn+0x22b/0x565
 wb_workfn+0x22b/0x565
 ? worker_thread+0x230/0x2ac
 process_one_work+0x2cc/0x517
 ? worker_thread+0x230/0x2ac
 worker_thread+0x1d4/0x2ac
 ? rescuer_thread+0x29b/0x29b
 kthread+0x15d/0x165
 ? kthread_create_on_node+0x3f/0x3f
 ? call_usermodehelper_exec_async+0x118/0x11f
 ret_from_fork+0x24/0x30

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-24 10:56:51 +00:00
David Howells 0fafdc9f88 afs: Fix file locking
Fix the AFS file locking whereby the use of the big kernel lock (which
could be slept with) was replaced by a spinlock (which couldn't).  The
problem is that the AFS code was doing stuff inside the critical section
that might call schedule(), so this is a broken transformation.

Fix this by the following means:

 (1) Use a state machine with a proper state that can only be changed under
     the spinlock rather than using a collection of bit flags.

 (2) Cache the key used for the lock and the lock type in the afs_vnode
     struct so that the manager work function doesn't have to refer to a
     file_lock struct that's been dequeued.  This makes signal handling
     safer.

 (4) Move the unlock from afs_do_unlk() to afs_fl_release_private() which
     means that unlock is achieved in other circumstances too.

 (5) Unlock the file on the server before taking the next conflicting lock.

Also change:

 (1) Check the permits on a file before actually trying the lock.

 (2) fsync the file before effecting an explicit unlock operation.  We
     don't fsync if the lock is erased otherwise as we might not be in a
     context where we can actually do that.

Further fixes:

 (1) Fixed-fileserver address rotation is made to work.  It's only used by
     the locking functions, so couldn't be tested before.

Fixes: 72f98e7255 ("locks: turn lock_flocks into a spinlock")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: jlayton@redhat.com
2017-11-17 10:06:13 +00:00
Linus Torvalds 487e2c9f44 AFS development
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAWgm9V/Sw1s6N8H32AQK5mQ//QGUDZLXsUPCtq0XJq0V+r4MUjNp9tCZR
 htiuNrEkHSyPpYgCcQ2Aqdl9kndwVXcE7lWT99mp/a0zwNAsp9GOGVhCXUd5R86G
 XlrBuUYVvBJk18tDsUNWdjRQ0gMHgQSlEnEbsaGiU1bVrpXatI9hL8qoeO78Iy7+
 eaJUQLCuCVJq7qMQGhC0hg338vmHVeYhnViXIxq+HFjsMmR9IVanuK+sQr6NSJxS
 F6RkPxBUPWkRVMHmxTLWj/XSHZwtwu+Mnc/UFYsAPLKEbY0cIohsI8EgfE8U7geU
 yRVnu3MIOXUXUrZizj9SwVYWdJfneRlINqMbHIO8QXMKR38tnQ0C2/7bgBsXiNPv
 YdiAyeqL4nM+JthV/rgA3hWgupwBlSb4ubclTphDNxMs5MBIUIK3XUt9GOXDDUZz
 2FT/FdrphM2UORaI2AEOi4Q0/nHdin+3rld8fjV0Ree/TPNXwcrOmvy8yGnxFCEp
 5b7YLwKrffZGnnS965dhZlnFR6hjndmzFgHdyRrJwc80hXi1Q/+W4F19MoYkkoVK
 G/gLvD3FbmygmFnjCik9TjUrro6vQxo56H/TuWgHTvYriNGH+D/D7EGUwg4GiXZZ
 +7vrNw660uXmZiu9i0YacCRyD8lvm7QpmWLb+uHwzfsBE1+C8UetyQ+egSWVdWJO
 KwPspygWXD4=
 =3vy0
 -----END PGP SIGNATURE-----

Merge tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull AFS updates from David Howells:
 "kAFS filesystem driver overhaul.

  The major points of the overhaul are:

   (1) Preliminary groundwork is laid for supporting network-namespacing
       of kAFS. The remainder of the namespacing work requires some way
       to pass namespace information to submounts triggered by an
       automount. This requires something like the mount overhaul that's
       in progress.

   (2) sockaddr_rxrpc is used in preference to in_addr for holding
       addresses internally and add support for talking to the YFS VL
       server. With this, kAFS can do everything over IPv6 as well as
       IPv4 if it's talking to servers that support it.

   (3) Callback handling is overhauled to be generally passive rather
       than active. 'Callbacks' are promises by the server to tell us
       about data and metadata changes. Callbacks are now checked when
       we next touch an inode rather than actively going and looking for
       it where possible.

   (4) File access permit caching is overhauled to store the caching
       information per-inode rather than per-directory, shared over
       subordinate files. Whilst older AFS servers only allow ACLs on
       directories (shared to the files in that directory), newer AFS
       servers break that restriction.

       To improve memory usage and to make it easier to do mass-key
       removal, permit combinations are cached and shared.

   (5) Cell database management is overhauled to allow lighter locks to
       be used and to make cell records autonomous state machines that
       look after getting their own DNS records and cleaning themselves
       up, in particular preventing races in acquiring and relinquishing
       the fscache token for the cell.

   (6) Volume caching is overhauled. The afs_vlocation record is got rid
       of to simplify things and the superblock is now keyed on the cell
       and the numeric volume ID only. The volume record is tied to a
       superblock and normal superblock management is used to mediate
       the lifetime of the volume fscache token.

   (7) File server record caching is overhauled to make server records
       independent of cells and volumes. A server can be in multiple
       cells (in such a case, the administrator must make sure that the
       VL services for all cells correctly reflect the volumes shared
       between those cells).

       Server records are now indexed using the UUID of the server
       rather than the address since a server can have multiple
       addresses.

   (8) File server rotation is overhauled to handle VMOVED, VBUSY (and
       similar), VOFFLINE and VNOVOL indications and to handle rotation
       both of servers and addresses of those servers. The rotation will
       also wait and retry if the server says it is busy.

   (9) Data writeback is overhauled. Each inode no longer stores a list
       of modified sections tagged with the key that authorised it in
       favour of noting the modified region of a page in page->private
       and storing a list of keys that made modifications in the inode.

       This simplifies things and allows other keys to be used to
       actually write to the server if a key that made a modification
       becomes useless.

  (10) Writable mmap() is implemented. This allows a kernel to be build
       entirely on AFS.

  Note that Pre AFS-3.4 servers are no longer supported, though this can
  be added back if necessary (AFS-3.4 was released in 1998)"

* tag 'afs-next-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (35 commits)
  afs: Protect call->state changes against signals
  afs: Trace page dirty/clean
  afs: Implement shared-writeable mmap
  afs: Get rid of the afs_writeback record
  afs: Introduce a file-private data record
  afs: Use a dynamic port if 7001 is in use
  afs: Fix directory read/modify race
  afs: Trace the sending of pages
  afs: Trace the initiation and completion of client calls
  afs: Fix documentation on # vs % prefix in mount source specification
  afs: Fix total-length calculation for multiple-page send
  afs: Only progress call state at end of Tx phase from rxrpc callback
  afs: Make use of the YFS service upgrade to fully support IPv6
  afs: Overhaul volume and server record caching and fileserver rotation
  afs: Move server rotation code into its own file
  afs: Add an address list concept
  afs: Overhaul cell database management
  afs: Overhaul permit caching
  afs: Overhaul the callback handling
  afs: Rename struct afs_call server member to cm_server
  ...
2017-11-16 11:41:22 -08:00
Linus Torvalds 7c225c69f8 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - a few misc bits

 - ocfs2 updates

 - almost all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (131 commits)
  memory hotplug: fix comments when adding section
  mm: make alloc_node_mem_map a void call if we don't have CONFIG_FLAT_NODE_MEM_MAP
  mm: simplify nodemask printing
  mm,oom_reaper: remove pointless kthread_run() error check
  mm/page_ext.c: check if page_ext is not prepared
  writeback: remove unused function parameter
  mm: do not rely on preempt_count in print_vma_addr
  mm, sparse: do not swamp log with huge vmemmap allocation failures
  mm/hmm: remove redundant variable align_end
  mm/list_lru.c: mark expected switch fall-through
  mm/shmem.c: mark expected switch fall-through
  mm/page_alloc.c: broken deferred calculation
  mm: don't warn about allocations which stall for too long
  fs: fuse: account fuse_inode slab memory as reclaimable
  mm, page_alloc: fix potential false positive in __zone_watermark_ok
  mm: mlock: remove lru_add_drain_all()
  mm, sysctl: make NUMA stats configurable
  shmem: convert shmem_init_inodecache() to void
  Unify migrate_pages and move_pages access checks
  mm, pagevec: rename pagevec drained field
  ...
2017-11-15 19:42:40 -08:00
Mel Gorman 8667982014 mm, pagevec: remove cold parameter for pagevecs
Every pagevec_init user claims the pages being released are hot even in
cases where it is unlikely the pages are hot.  As no one cares about the
hotness of pages being released to the allocator, just ditch the
parameter.

No performance impact is expected as the overhead is marginal.  The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.

Link: http://lkml.kernel.org/r/20171018075952.10627-6-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:06 -08:00
Jan Kara aef6e415ee afs: use find_get_pages_range_tag()
Use find_get_pages_range_tag() in afs_writepages_region() as we are
interested only in pages from given range.  Remove unnecessary code
after this conversion.

Link: http://lkml.kernel.org/r/20171009151359.31984-16-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:04 -08:00
David Howells 98bf40cd99 afs: Protect call->state changes against signals
Protect call->state changes against the call being prematurely terminated
due to a signal.

What can happen is that a signal causes afs_wait_for_call_to_complete() to
abort an afs_call because it's not yet complete whilst afs_deliver_to_call()
is delivering data to that call.

If the data delivery causes the state to change, this may overwrite the state
of the afs_call, making it not-yet-complete again - but no further
notifications will be forthcoming from AF_RXRPC as the rxrpc call has been
aborted and completed, so kAFS will just hang in various places waiting for
that call or on page bits that need clearing by that call.

A tracepoint to monitor call state changes is also provided.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:21 +00:00
David Howells 13524ab3c6 afs: Trace page dirty/clean
Add a trace event that logs the dirtying and cleaning of pages attached to
AFS inodes.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:21 +00:00
David Howells 1cf7a1518a afs: Implement shared-writeable mmap
Implement shared-writeable mmap for AFS.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:21 +00:00
David Howells 4343d00872 afs: Get rid of the afs_writeback record
Get rid of the afs_writeback record that kAFS is using to match keys with
writes made by that key.

Instead, keep a list of keys that have a file open for writing and/or
sync'ing and iterate through those.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:20 +00:00
David Howells 215804a992 afs: Introduce a file-private data record
Introduce a file-private data record for kAFS and put the key into it
rather than storing the key in file->private_data.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:20 +00:00
Marc Dionne 83732ec514 afs: Use a dynamic port if 7001 is in use
It is not required that the afs client operate on port 7001.
The port could be in use because another kernel or userspace
client has already bound to it.

If the port is in use, just fallback to using a dynamic port.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:20 +00:00
David Howells dab17c1add afs: Fix directory read/modify race
Because parsing of the directory wasn't being done under any sort of lock,
the pages holding the directory content can get invalidated whilst the
parsing is ongoing.

Further, the directory page check function gets called outside of the page
lock, so if the page gets cleared or updated, this may return reports of
bad magic numbers in the directory page.

Also, the directory may change size whilst checking and parsing are
ongoing, so more care needs to be taken here.

Fix this by:

 (1) Perform the page check from the page filling function before we set
     PageUptodate and drop the page lock.

 (2) Check for the file having shrunk and the page having been abandoned
     before checking the page contents.

 (3) Lock the page whilst parsing it for the directory iterator.

Whilst we're at it, add a tracepoint to report check failure.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:20 +00:00
David Howells 2c099014a0 afs: Trace the sending of pages
Add a pair of tracepoints to log the sending of pages for an FS.StoreData
or FS.StoreData64 operation.

Tracepoint afs_send_pages notes each set of pages added to the operation.
There may be several of these per operation as we get up at most 8
contiguous pages in one go because the bvec we're using is on the stack.

Tracepoint afs_sent_pages notes the end of adding data from a whole run of
pages to the operation and the completion of the request phase.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells 025db80c9e afs: Trace the initiation and completion of client calls
Add tracepoints to trace the initiation and completion of client calls
within the kafs filesystem.

The afs_make_vl_call tracepoint watches calls to the volume location
database server.

The afs_make_fs_call tracepoint watches calls to the file server.

The afs_call_done tracepoint watches for call completion.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells 1199db6035 afs: Fix total-length calculation for multiple-page send
Fix the total-length calculation in afs_make_call() when the operation
being dispatched has data from a series of pages attached.

Despite the patched code looking like that it should reduce mathematically
to the current code, it doesn't because the 32-bit unsigned arithmetic
being used to calculate the page-offset-difference doesn't correctly extend
to a 64-bit value when the result is effectively negative.

Without this, some FS.StoreData operations that span multiple pages fail,
reporting too little or too much data.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells 5f0fc8ba6a afs: Only progress call state at end of Tx phase from rxrpc callback
Only progress the AFS call state at the end of Tx phase from the callback
passed to rxrpc_kernel_send_data() rather than setting it before the last
data send call.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells bf99a53ce2 afs: Make use of the YFS service upgrade to fully support IPv6
YFS VL servers offer an upgraded Volume Location service that can return
IPv6 addresses to fileservers and volume servers in addition to IPv4
addresses using the YFSVL.GetEndpoints operation which we should use if
it's available.

To this end:

 (1) Make rxrpc_kernel_recv_data() return the call's current service ID so
     that the caller can detect service upgrade and see what the service
     was upgraded to.

 (2) When we see a VL server address we haven't seen before, send a
     VL.GetCapabilities operation to it with the service upgrade bit set.

     If we get an upgrade to the YFS VL service, change the service ID in
     the address list for that address to use the upgraded service and set
     a flag to note that this appears to be a YFS-compatible server.

 (3) If, when a server's addresses are being looked up, we note that we
     previously detected a YFS-compatible server, then send the
     YFSVL.GetEndpoints operation rather than VL.GetAddrsU.

 (4) Build a fileserver address list from the reply of YFSVL.GetEndpoints,
     including both IPv4 and IPv6 addresses.  Volume server addresses are
     discarded.

 (5) The address list is sorted by address and port now, instead of just
     address.  This allows multiple servers on the same host sitting on
     different ports.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells d2ddc776a4 afs: Overhaul volume and server record caching and fileserver rotation
The current code assumes that volumes and servers are per-cell and are
never shared, but this is not enforced, and, indeed, public cells do exist
that are aliases of each other.  Further, an organisation can, say, set up
a public cell and a private cell with overlapping, but not identical, sets
of servers.  The difference is purely in the database attached to the VL
servers.

The current code will malfunction if it sees a server in two cells as it
assumes global address -> server record mappings and that each server is in
just one cell.

Further, each server may have multiple addresses - and may have addresses
of different families (IPv4 and IPv6, say).

To this end, the following structural changes are made:

 (1) Server record management is overhauled:

     (a) Server records are made independent of cell.  The namespace keeps
     	 track of them, volume records have lists of them and each vnode
     	 has a server on which its callback interest currently resides.

     (b) The cell record no longer keeps a list of servers known to be in
     	 that cell.

     (c) The server records are now kept in a flat list because there's no
     	 single address to sort on.

     (d) Server records are now keyed by their UUID within the namespace.

     (e) The addresses for a server are obtained with the VL.GetAddrsU
     	 rather than with VL.GetEntryByName, using the server's UUID as a
     	 parameter.

     (f) Cached server records are garbage collected after a period of
     	 non-use and are counted out of existence before purging is allowed
     	 to complete.  This protects the work functions against rmmod.

     (g) The servers list is now in /proc/fs/afs/servers.

 (2) Volume record management is overhauled:

     (a) An RCU-replaceable server list is introduced.  This tracks both
     	 servers and their coresponding callback interests.

     (b) The superblock is now keyed on cell record and numeric volume ID.

     (c) The volume record is now tied to the superblock which mounts it,
     	 and is activated when mounted and deactivated when unmounted.
     	 This makes it easier to handle the cache cookie without causing a
     	 double-use in fscache.

     (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU
     	 to get the server UUID list.

     (e) The volume name is updated if it is seen to have changed when the
     	 volume is updated (the update is keyed on the volume ID).

 (3) The vlocation record is got rid of and VLDB records are no longer
     cached.  Sufficient information is stored in the volume record, though
     an update to a volume record is now no longer shared between related
     volumes (volumes come in bundles of three: R/W, R/O and backup).

and the following procedural changes are made:

 (1) The fileserver cursor introduced previously is now fleshed out and
     used to iterate over fileservers and their addresses.

 (2) Volume status is checked during iteration, and the server list is
     replaced if a change is detected.

 (3) Server status is checked during iteration, and the address list is
     replaced if a change is detected.

 (4) The abort code is saved into the address list cursor and -ECONNABORTED
     returned in afs_make_call() if a remote abort happened rather than
     translating the abort into an error message.  This allows actions to
     be taken depending on the abort code more easily.

     (a) If a VMOVED abort is seen then this is handled by rechecking the
     	 volume and restarting the iteration.

     (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is
         handled by sleeping for a short period and retrying and/or trying
         other servers that might serve that volume.  A message is also
         displayed once until the condition has cleared.

     (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the
     	 moment.

     (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to
     	 see if it has been deleted; if not, the fileserver is probably
     	 indicating that the volume couldn't be attached and needs
     	 salvaging.

     (e) If statfs() sees one of these aborts, it does not sleep, but
     	 rather returns an error, so as not to block the umount program.

 (5) The fileserver iteration functions in vnode.c are now merged into
     their callers and more heavily macroised around the cursor.  vnode.c
     is removed.

 (6) Operations on a particular vnode are serialised on that vnode because
     the server will lock that vnode whilst it operates on it, so a second
     op sent will just have to wait.

 (7) Fileservers are probed with FS.GetCapabilities before being used.
     This is where service upgrade will be done.

 (8) A callback interest on a fileserver is set up before an FS operation
     is performed and passed through to afs_make_call() so that it can be
     set on the vnode if the operation returns a callback.  The callback
     interest is passed through to afs_iget() also so that it can be set
     there too.

In general, record updating is done on an as-needed basis when we try to
access servers, volumes or vnodes rather than offloading it to work items
and special threads.

Notes:

 (1) Pre AFS-3.4 servers are no longer supported, though this can be added
     back if necessary (AFS-3.4 was released in 1998).

 (2) VBUSY is retried forever for the moment at intervals of 1s.

 (3) /proc/fs/afs/<cell>/servers no longer exists.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells 9cc6fc50f7 afs: Move server rotation code into its own file
Move server rotation code into its own file.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:19 +00:00
David Howells 8b2a464ced afs: Add an address list concept
Add an RCU replaceable address list structure to hold a list of server
addresses.  The list also holds the

To this end:

 (1) A cell's VL server address list can be loaded directly via insmod or
     echo to /proc/fs/afs/cells or dynamically from a DNS query for AFSDB
     or SRV records.

 (2) Anyone wanting to use a cell's VL server address must wait until the
     cell record comes online and has tried to obtain some addresses.

 (3) An FS server's address list, for the moment, has a single entry that
     is the key to the server list.  This will change in the future when a
     server is instead keyed on its UUID and the VL.GetAddrsU operation is
     used.

 (4) An 'address cursor' concept is introduced to handle iteration through
     the address list.  This is passed to the afs_make_call() as, in the
     future, stuff (such as abort code) that doesn't outlast the call will
     be returned in it.

In the future, we might want to annotate the list with information about
how each address fares.  We might then want to propagate such annotations
over address list replacement.

Whilst we're at it, we allow IPv6 addresses to be specified in
colon-delimited lists by enclosing them in square brackets.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells 989782dcdc afs: Overhaul cell database management
Overhaul the way that the in-kernel AFS client keeps track of cells in the
following manner:

 (1) Cells are now held in an rbtree to make walking them quicker and RCU
     managed (though this is probably overkill).

 (2) Cells now have a manager work item that:

     (A) Looks after fetching and refreshing the VL server list.

     (B) Manages cell record lifetime, including initialising and
     	 destruction.

     (B) Manages cell record caching whereby threads are kept around for a
     	 certain time after last use and then destroyed.

     (C) Manages the FS-Cache index cookie for a cell.  It is not permitted
     	 for a cookie to be in use twice, so we have to be careful to not
     	 allow a new cell record to exist at the same time as an old record
     	 of the same name.

 (3) Each AFS network namespace is given a manager work item that manages
     the cells within it, maintaining a single timer to prod cells into
     updating their DNS records.

     This uses the reduce_timer() facility to make the timer expire at the
     soonest timed event that needs happening.

 (4) When a module is being unloaded, cells and cell managers are now
     counted out using dec_after_work() to make sure the module text is
     pinned until after the data structures have been cleaned up.

 (5) Each cell's VL server list is now protected by a seqlock rather than a
     semaphore.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells be080a6f43 afs: Overhaul permit caching
Overhaul permit caching in AFS by making it per-vnode and sharing permit
lists where possible.

When most of the fileserver operations are called, they return a status
structure indicating the (revised) details of the vnode or vnodes involved
in the operation.  This includes the access mark derived from the ACL
(named CallerAccess in the protocol definition file).  This is cacheable
and if the ACL changes, the server will tell us that it is breaking the
callback promise, at which point we can discard the currently cached
permits.

With this patch, the afs_permits structure has, at the end, an array of
{ key, CallerAccess } elements, sorted by key pointer.  This is then cached
in a hash table so that it can be shared between vnodes with the same
access permits.

Permit lists can only be shared if they contain the exact same set of
key->CallerAccess mappings.

Note that that table is global rather than being per-net_ns.  If the keys
in a permit list cross net_ns boundaries, there is no problem sharing the
cached permits, since the permits are just integer masks.

Since permit lists pin keys, the permit cache also makes it easier for a
future patch to find all occurrences of a key and remove them by means of
setting the afs_permits::invalidated flag and then clearing the appropriate
key pointer.  In such an event, memory barriers will need adding.

Lastly, the permit caching is skipped if the server has sent either a
vnode-specific or an entire-server callback since the start of the
operation.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells c435ee3455 afs: Overhaul the callback handling
Overhaul the AFS callback handling by the following means:

 (1) Don't give up callback promises on vnodes that we are no longer using,
     rather let them just expire on the server or let the server break
     them.  This is actually more efficient for the server as the callback
     lookup is expensive if there are lots of extant callbacks.

 (2) Only give up the callback promises we have from a server when the
     server record is destroyed.  Then we can just give up *all* the
     callback promises on it in one go.

 (3) Servers can end up being shared between cells if cells are aliased, so
     don't add all the vnodes being backed by a particular server into a
     big FID-indexed tree on that server as there may be duplicates.

     Instead have each volume instance (~= superblock) register an interest
     in a server as it starts to make use of it and use this to allow the
     processor for callbacks from the server to find the superblock and
     thence the inode corresponding to the FID being broken by means of
     ilookup_nowait().

 (4) Rather than iterating over the entire callback list when a mass-break
     comes in from the server, maintain a counter of mass-breaks in
     afs_server (cb_seq) and make afs_validate() check it against the copy
     in afs_vnode.

     It would be nice not to have to take a read_lock whilst doing this,
     but that's tricky without using RCU.

 (5) Save a ref on the fileserver we're using for a call in the afs_call
     struct so that we can access its cb_s_break during call decoding.

 (6) Write-lock around callback and status storage in a vnode and read-lock
     around getattr so that we don't see the status mid-update.

This has the following consequences:

 (1) Data invalidation isn't seen until someone calls afs_validate() on a
     vnode.  Unfortunately, we need to use a key to query the server, but
     getting one from a background thread is tricky without caching loads
     of keys all over the place.

 (2) Mass invalidation isn't seen until someone calls afs_validate().

 (3) Callback breaking is going to hit the inode_hash_lock quite a bit.
     Could this be replaced with rcu_read_lock() since inodes are destroyed
     under RCU conditions.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells d0676a1678 afs: Rename struct afs_call server member to cm_server
Rename the server member of struct afs_call to cm_server as we're only
going to be using it for incoming calls for the Cache Manager service.
This makes it easier to differentiate from the pointer to the target server
for the client, which will point to a different structure to allow for
callback handling.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells 03dc2cfca5 afs: Fix the afs_uuid struct to make the char-sized fields signed
In AFS's encoding of a UUID, the eight 'char' fields are all signed, so
represent them with __s8 rather than __u8.  This makes the compiler
sign-extend them correctly when XDR-encoding them.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells f4b3526d83 afs: Connect up the CB.ProbeUuid
The handler for the CB.ProbeUuid operation in the cache manager is
implemented, but isn't listed in the switch-statement of operation
selection, so won't be used.  Fix this by adding it.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:18 +00:00
David Howells 33cd7f2b76 afs: Potentially return call->reply[0] from afs_make_call()
If call->ret_reply0 is set, return call->reply[0] on success.  Change the
return type of afs_make_call() to long so that this can be passed back
without bit loss and then cast to a pointer if required.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:17 +00:00
David Howells 97e3043ad8 afs: Condense afs_call's reply{,2,3,4} into an array
Condense struct afs_call's reply anchor members - reply{,2,3,4} - into an
array.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:17 +00:00
David Howells f780c8ea0e afs: Consolidate abort_to_error translators
The AFS abort code space is shared across all services, so there's no need
for separate abort_to_error translators for each service.

Consolidate them into a single function and remove the function pointers
for them.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:17 +00:00
David Howells 3838d3ecde afs: Allow IPv6 address specification of VL servers
Allow VL server specifications to be given IPv6 addresses as well as IPv4
addresses, for example as:

	echo add foo.org 1111:2222:3333:0:4444:5555:6666:7777 >/proc/fs/afs/cells

Note that ':' is the expected separator for separating IPv4 addresses, but
if a ',' is detected or no '.' is detected in the string, the delimiter is
switched to ','.

This also works with DNS AFSDB or SRV record strings fetched by upcall from
userspace.

Signed-off-by: David Howells <dhowells@redhat.com>
2017-11-13 15:38:17 +00:00