Commit Graph

13137 Commits

Author SHA1 Message Date
Linus Torvalds ed58d66f60 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
 "Yet another pile of melted spectrum related updates:

   - Drop native vsyscall support finally as it causes more trouble than
     benefit.

   - Make microcode loading more robust. There were a few issues
     especially related to late loading which are now surfacing because
     late loading of the IB* microcodes addressing spectre issues has
     become more widely used.

   - Simplify and robustify the syscall handling in the entry code

   - Prevent kprobes on the entry trampoline code which lead to kernel
     crashes when the probe hits before CR3 is updated

   - Don't check microcode versions when running on hypervisors as they
     are considered as lying anyway.

   - Fix the 32bit objtool build and a coment typo"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix kernel crash when probing .entry_trampoline code
  x86/pti: Fix a comment typo
  x86/microcode: Synchronize late microcode loading
  x86/microcode: Request microcode on the BSP
  x86/microcode/intel: Look into the patch cache first
  x86/microcode: Do not upload microcode if CPUs are offline
  x86/microcode/intel: Writeback and invalidate caches before updating microcode
  x86/microcode/intel: Check microcode revision before updating sibling threads
  x86/microcode: Get rid of struct apply_microcode_ctx
  x86/spectre_v2: Don't check microcode versions when running under hypervisors
  x86/vsyscall/64: Drop "native" vsyscalls
  x86/entry/64/compat: Save one instruction in entry_INT80_compat()
  x86/entry: Do not special-case clone(2) in compat entry
  x86/syscalls: Use COMPAT_SYSCALL_DEFINEx() macros for x86-only compat syscalls
  x86/syscalls: Use proper syscall definition for sys_ioperm()
  x86/entry: Remove stale syscall prototype
  x86/syscalls/32: Simplify $entry == $compat entries
  objtool: Fix 32-bit build
2018-03-11 14:59:23 -07:00
Linus Torvalds 8ad4424350 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Thomas Gleixner:
 "Another set of perf updates:

   - Fix a Skylake Uncore event format declaration

   - Prevent perf pipe mode from crahsing which was caused by a missing
     buffer allocation

   - Make the perf top popup message which tells the user that it uses
     fallback mode on older kernels a debug message.

   - Make perf context rescheduling work correcctly

   - Robustify the jump error drawing in perf browser mode so it does
     not try to create references to NULL initialized offset entries

   - Make trigger_on() robust so it does not enable the trigger before
     everything is set up correctly to handle it

   - Make perf auxtrace respect the --no-itrace option so it does not
     try to queue AUX data for decoding.

   - Prevent having different number of field separators in CVS output
     lines when a counter is not supported.

   - Make the perf kallsyms man page usage behave like it does for all
     other perf commands.

   - Synchronize the kernel headers"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix ctx_event_type in ctx_resched()
  perf tools: Fix trigger class trigger_on()
  perf auxtrace: Prevent decoding when --no-itrace
  perf stat: Fix CVS output format for non-supported counters
  tools headers: Sync x86's cpufeatures.h
  tools headers: Sync copy of kvm UAPI headers
  perf record: Fix crash in pipe mode
  perf annotate browser: Be more robust when drawing jump arrows
  perf top: Fix annoying fallback message on older kernels
  perf kallsyms: Fix the usage on the man page
  perf/x86/intel/uncore: Fix Skylake UPI event format
2018-03-11 14:49:49 -07:00
Li Zhijian 0627be7d3c selftests/vm/run_vmtests: adjust hugetlb size according to nr_cpus
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus.

  ---------------------------
  running userfaultfd_hugetlb
  ---------------------------
  invalid MiB
  Usage: <MiB> <bounces>
  [FAIL]

Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size
>= nr_cpus * hugepage_size.  hugepage_size is often 2M, so when host
cpus > 64, it requires more than 128M.

[zhijianx.li@intel.com: update changelog/comments and variable name]
 Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
 Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-09 16:40:01 -08:00
Linus Torvalds a525df0558 powerpc fixes for 4.16 #5
One notable fix to properly advertise our support for a new firmware feature,
 caused by two series conflicting semantically but not textually.
 
 There's a new ioctl for the new ocxl driver, which is not a fix, but needed to
 complete the userspace API and good to have before the driver is in a released
 kernel.
 
 Finally three minor selftest fixes, and a fix for intermittent build failures
 for some obscure platforms, caused by a missing make dependency.
 
 Thanks to:
   Alastair D'Silva, Bharata B Rao, Guenter Roeck.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJaomOTExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYBV
 LQ/+MyHQH7d/lhqRLWa3BVgy9mn2QfFTkRNMi46eqIWyk6wD5Qf//gzO+vTDzcEO
 rzkBu3XwhuhDCpCInLtJH17X8iKVy65Uk2JQ808pZTm0WnNTBv0ag251QARDg//B
 S1QmCQGJkpoUJ85+IDqQzV90K2o13BPWkAOrVh40G5GASvFGZRdxuTuo4DKeIe/j
 0yri2LRuL+cpcfmZqaJVco8l2tqJEi6zJRhL/ORrLr4XSy0clxF1q1MYshNWPDsB
 3l4r/yKz2aMltplknVVrpdMThUTD311kknIHoQuuEYvd6GxDz52d3B1lvE5Xb8EB
 sNJQX6q8ydab0u79/tTsXUm/EyfmMd6HMKOeVnQim19tnEe0wW6VkaPDNWWXa66U
 hW0qx7rX+zMSHzEcgLF7HKirzCQi2oS5ZMqXvhHlOPBb8Iy0O5za670AtvMGgm7/
 NKXKML31opgXmTcU2ZxBMrtL0S8ft3wHCKRLkB6H8GHE+6//Ps87bQaUo4v2KsOr
 2T/2w6TVtAwxLrASpCVonfcmIjjjIK4WILaOKp24Yzyv0eqen6Z3/kkga37sLgj8
 f11HzTfFWO5ckroHrJSVCOC48eWb+O1CWRwS4rofL1jLfucpv6VFTPK6F4G47pAj
 pZyIJMTem0AEgsxVBJlsw6TibGH5W6rzDE/2WpEqxb7iZh0=
 =ajRr
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One notable fix to properly advertise our support for a new firmware
  feature, caused by two series conflicting semantically but not
  textually.

  There's a new ioctl for the new ocxl driver, which is not a fix, but
  needed to complete the userspace API and good to have before the
  driver is in a released kernel.

  Finally three minor selftest fixes, and a fix for intermittent build
  failures for some obscure platforms, caused by a missing make
  dependency.

  Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck"

* tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Fix vector5 in ibm architecture vector table
  ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL
  ocxl: Add get_metadata IOCTL to share OCXL information to userspace
  selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
  selftests/powerpc: Fix missing clean of pmu/lib.o
  powerpc/boot: Fix random libfdt related build errors
  selftests/powerpc: Skip tm-trap if transactional memory is not enabled
2018-03-09 09:33:48 -08:00
Andy Lutomirski 076ca272a1 x86/vsyscall/64: Drop "native" vsyscalls
Since Linux v3.2, vsyscalls have been deprecated and slow.  From v3.2
on, Linux had three vsyscall modes: "native", "emulate", and "none".

"emulate" is the default.  All known user programs work correctly in
emulate mode, but vsyscalls turn into page faults and are emulated.
This is very slow.  In "native" mode, the vsyscall page is easily
usable as an exploit gadget, but vsyscalls are a bit faster -- they
turn into normal syscalls.  (This is in contrast to vDSO functions,
which can be much faster than syscalls.)  In "none" mode, there are
no vsyscalls.

For all practical purposes, "native" was really just a chicken bit
in case something went wrong with the emulation.  It's been over six
years, and nothing has gone wrong.  Delete it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-08 06:48:15 +01:00
Josh Poimboeuf 63474dc4ac objtool: Fix 32-bit build
Fix the objtool build when cross-compiling a 64-bit kernel on a 32-bit
host.  This also simplifies read_retpoline_hints() a bit and makes its
implementation similar to most of the other annotation reading
functions.

Reported-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b5bc2231b8 ("objtool: Add retpoline validation")
Link: http://lkml.kernel.org/r/2ca46c636c23aa9c9d57d53c75de4ee3ddf7a7df.1520380691.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-07 07:50:38 +01:00
Adrian Hunter de19e5c3c5 perf tools: Fix trigger class trigger_on()
trigger_on() means that the trigger is available but not ready, however
trigger_on() was making it ready. That can segfault if the signal comes
before trigger_ready(). e.g. (USR2 signal delivery not shown)

  $ perf record -e intel_pt//u -S sleep 1
  perf: Segmentation fault
  Obtained 16 stack frames.
  /home/ahunter/bin/perf(sighandler_dump_stack+0x40) [0x4ec550]
  /lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
  /home/ahunter/bin/perf(perf_evsel__disable+0x26) [0x4b9dd6]
  /home/ahunter/bin/perf() [0x43a45b]
  /lib/x86_64-linux-gnu/libc.so.6(+0x36caf) [0x7fa76411acaf]
  /lib/x86_64-linux-gnu/libc.so.6(__xstat64+0x15) [0x7fa7641d2cc5]
  /home/ahunter/bin/perf() [0x4ec6c9]
  /home/ahunter/bin/perf() [0x4ec73b]
  /home/ahunter/bin/perf() [0x4ec73b]
  /home/ahunter/bin/perf() [0x4ec73b]
  /home/ahunter/bin/perf() [0x4eca15]
  /home/ahunter/bin/perf(machine__create_kernel_maps+0x257) [0x4f0b77]
  /home/ahunter/bin/perf(perf_session__new+0xc0) [0x4f86f0]
  /home/ahunter/bin/perf(cmd_record+0x722) [0x43c132]
  /home/ahunter/bin/perf() [0x4a11ae]
  /home/ahunter/bin/perf(main+0x5d4) [0x427fb4]

Note, for testing purposes, this is hard to hit unless you add some sleep()
in builtin-record.c before record__open().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 3dcc4436fa ("perf tools: Introduce trigger class")
Link: http://lkml.kernel.org/r/1519807144-30694-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-06 11:31:14 -03:00
Adrian Hunter 2e2967f4c3 perf auxtrace: Prevent decoding when --no-itrace
Prevent auxtrace_queues__process_index() from queuing AUX area data for
decoding when the --no-itrace option has been used.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-06 11:05:47 -03:00
Ilya Pronin 40c21898ba perf stat: Fix CVS output format for non-supported counters
When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:

<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,

Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.

Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes: 92a61f6412 ("perf stat: Implement CSV metrics output")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-06 10:53:52 -03:00
Linus Torvalds 094b58e104 linux-kselftest-4.16-rc5
This kselftest fixes update has a fix for regression in memory-hotplug
 install script that prevents the test from running on the target.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJanXCKAAoJEAsCRMQNDUMcEykQANsg1ald/F9YkldyCTkVpUu1
 mqaCRsO1NL7oXoaGJzddkBx7JSxxnwHpelTGxAU1Cybfix5iSGjabIJ5lxre/Y0r
 KB54n1W7iwUs2KTx2QHZXem0MfPoxB84VSApKnBUZCk5PYP8eVPn0Ezg3kgHBSMe
 F/OnkqTZ9Xm32QWjFU09tnTDqNJrN8RbLtF+b6AaT8bHDfrseDHeTY8gi7WOCHgY
 5FQescCA3tD336n7Da+mXIesc1KMwmhGsHGMnld2A3kUYGctK5pereEoxtyjIbPN
 zDDUXuz2Y+rwS/+lq/Xv+UGpfhLr/l/5i6pou7XvitUDQMcX0GH8pGId8jizpZUL
 +hH9PrXKjobbnk2sttBriIUIXD18Wwhhvs3gy4JK+mli1Ati1pnDIN9lZG3+Y2N2
 NBVS/Z4GWjTLzPXtLSvNeiSL22Cm2WldSBsJXmva9VgOmOrNoWfH13/SIVTMNhWK
 juFKigK/djZhFDu8Q1Epr91aA6D4sPrwy0NNCSXal701qohc6XMVhiB4KzjkDqj1
 Hxq3BpmTHhwhUi22Emc6WJ6vQmeoxyKVck71cHA6GzcPzBs7tk165xnvFdd4m9uP
 INtwuyEIpAwHT2b/cjLiaLhvwbWsajwoEskeV/n3CnKqkgEDz6cfDh3qA2ZE8jWW
 rFJgUQUTIypDyE8r5/8c
 =QfKZ
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "A fix for regression in memory-hotplug install script that prevents
  the test from running on the target"

* tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: memory-hotplug: fix emit_tests regression
2018-03-05 11:57:06 -08:00
Linus Torvalds 547046141f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Use an appropriate TSQ pacing shift in mac80211, from Toke
    Høiland-Jørgensen.

 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk
    in ip6_route_me_harder, from Eric Dumazet.

 3) Fix several shutdown races and similar other problems in l2tp, from
    James Chapman.

 4) Handle missing XDP flush properly in tuntap, for real this time.
    From Jason Wang.

 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel
    Borkmann.

 6) Fix phy_resume() locking, from Andrew Lunn.

 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix
    from Xin Long.

 8) Revert F-RTO middle box workarounds, they only handle one dimension
    of the problem. From Yuchung Cheng.

 9) Fix socket refcounting in RDS, from Ka-Cheong Poon.

10) Don't allow ppp unit registration to an unregistered channel, from
    Guillaume Nault.

11) Various hv_netvsc fixes from Stephen Hemminger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits)
  hv_netvsc: propagate rx filters to VF
  hv_netvsc: filter multicast/broadcast
  hv_netvsc: defer queue selection to VF
  hv_netvsc: use napi_schedule_irqoff
  hv_netvsc: fix race in napi poll when rescheduling
  hv_netvsc: cancel subchannel setup before halting device
  hv_netvsc: fix error unwind handling if vmbus_open fails
  hv_netvsc: only wake transmit queue if link is up
  hv_netvsc: avoid retry on send during shutdown
  virtio-net: re enable XDP_REDIRECT for mergeable buffer
  ppp: prevent unregistered channels from connecting to PPP units
  tc-testing: skbmod: fix match value of ethertype
  mlxsw: spectrum_switchdev: Check success of FDB add operation
  net: make skb_gso_*_seglen functions private
  net: xfrm: use skb_gso_validate_network_len() to check gso sizes
  net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
  net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
  rds: Incorrect reference counting in TCP socket creation
  net: ethtool: don't ignore return from driver get_fecparam method
  vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
  ...
2018-03-05 11:29:24 -08:00
Arnaldo Carvalho de Melo 4caea0574c tools headers: Sync x86's cpufeatures.h
The changes in dd84441a79 ("x86/speculation: Use IBRS if available
before calling into firmware") don't need any kind of special treatment
in the current tools/perf/ codebase, so just update the copy to get rid
of the perf build warning:

  BUILD:   Doing 'make -j4' parallel build
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mzmuxocrf96v922xkerey3ns@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05 12:07:52 -03:00
Arnaldo Carvalho de Melo d976a6e9d9 tools headers: Sync copy of kvm UAPI headers
In 801e459a6f ("KVM: x86: Add a framework for supporting MSR-based
features") a new ioctl was introduced, which with this sync of the kvm
UAPI headers, makes 'perf trace' know about it:

  $ cd /tmp/build/perf/trace/beauty/generated/ioctl/
  $ diff -u kvm_ioctl_array.c.old kvm_ioctl_array.c
  --- /tmp/kvm_ioctl_array.c	2018-03-05 11:55:38.409145056 -0300
  +++ /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c	2018-03-05 11:56:17.456153501 -0300
  @@ -6,6 +6,7 @@
 	[0x04] = "GET_VCPU_MMAP_SIZE",
 	[0x05] = "GET_SUPPORTED_CPUID",
 	[0x09] = "GET_EMULATED_CPUID",
  +	[0x0a] = "GET_MSR_FEATURE_INDEX_LIST",
 	[0x40] = "SET_MEMORY_REGION",
 	[0x41] = "CREATE_VCPU",
 	[0x42] = "GET_DIRTY_LOG",

So when using 'perf trace -e ioctl' that will appear along with the
others, like in this excerpt of a system wide session:

  14.556 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  14.565 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0
  14.573 (         ): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) ...
  34.075 ( 0.016 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e850) = 0
  40.549 ( 0.012 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73ece0) = 0
  40.625 ( 0.005 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e940) = 0
  40.632 ( 0.003 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffe4e73e9b0) = 0

This also silences the perf build header copy drift verifier:

  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-h31oz5g0mt1dh2s2ajq6o6no@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05 11:56:40 -03:00
Jiri Olsa cfacbabd1d perf record: Fix crash in pipe mode
Currently we can crash perf record when running in pipe mode, like:

  $ perf record ls | perf report
  # To display the perf.data header info, please use --header/--header-only options.
  #
  perf: Segmentation fault
  Error:
  The - file has no samples!

The callstack of the crash is:

    0x0000000000515242 in perf_event__synthesize_event_update_name
  3513            ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]);
  (gdb) bt
  #0  0x0000000000515242 in perf_event__synthesize_event_update_name
  #1  0x00000000005158a4 in perf_event__synthesize_extra_attr
  #2  0x0000000000443347 in record__synthesize
  #3  0x00000000004438e3 in __cmd_record
  #4  0x000000000044514e in cmd_record
  #5  0x00000000004cbc95 in run_builtin
  #6  0x00000000004cbf02 in handle_internal_command
  #7  0x00000000004cc054 in run_argv
  #8  0x00000000004cc422 in main

The reason of the crash is that the evsel does not have ids array
allocated and the pipe's synthesize code tries to access it.

We don't force evsel ids allocation when we have single event, because
it's not needed. However we need it when we are in pipe mode even for
single event as a key for evsel update event.

Fixing this by forcing evsel ids allocation event for single event, when
we are in pipe mode.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180302161354.30192-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05 11:52:41 -03:00
Arnaldo Carvalho de Melo 9cf195f80c perf annotate browser: Be more robust when drawing jump arrows
This first happened with a gcc function, _cpp_lex_token, that has the
usual jumps:

 │1159e6c: ↓ jne    115aa32 <_cpp_lex_token@@Base+0xf92>

I.e. jumps to a label inside that function (_cpp_lex_token), and those
works, but also this kind:

 │1159e8b: ↓ jne    c469be <cpp_named_operator2name@@Base+0xa72>

I.e. jumps to another function, outside _cpp_lex_token, which are not
being correctly handled generating as a side effect references to
ab->offset[] entries that are set to NULL, so to make this code more
robust, check that here.

A proper fix for will be put in place, looking at the function name
right after the '<' token and probably treating this like a 'call'
instruction.

For now just don't draw the arrow.

Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05 11:50:15 -03:00
Kan Liang 626af862da perf top: Fix annoying fallback message on older kernels
On older (e.g. v4.4) kernels, an annoying fallback message can be
observed in 'perf top':

	┌─Warning:──────────────────────┐
	│fall back to non-overwrite mode│
	│                               │
	│                               │
	│Press any key...               │
	└───────────────────────────────┘

The 'perf top' utility has been changed to overwrite mode since commit
ebebbf0823 ("perf top: Switch default mode to overwrite mode").

For older kernels which don't have overwrite mode support, 'perf top'
will fall back to non-overwrite mode and print out the fallback message
using ui__warning(), which needs user's input to close.

The fallback message is not critical for end users. Turning it to debug
message which is printed when running with -vv.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Fixes: ebebbf0823 ("perf top: Switch default mode to overwrite mode")
Link: http://lkml.kernel.org/r/1519669030-176549-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05 11:48:56 -03:00
Sangwon Hong f6d3f35e00 perf kallsyms: Fix the usage on the man page
First, all man pages highlight only perf and subcommands except 'perf
kallsyms', which includes the full usage. Fix it for commands to
monopolize underlines.

Second, options can be ommited when executing 'perf kallsyms', so add
square brackets between <option>.

Signed-off-by: Sangwon Hong <qpakzk@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-05 11:48:37 -03:00
Davide Caratti 79f3a8e662 tc-testing: skbmod: fix match value of ethertype
iproute2 print_skbmod() prints the configured ethertype using format 0x%X:
therefore, test 9aa8 systematically fails, because it configures action #4
using ethertype 0x0031, and expects 0x0031 when it reads it back. Changing
the expected value to 0x31 lets the test result 'not ok' become 'ok'.

tested with:
 # ./tdc.py -e 9aa8
 Test 9aa8: Get a single skbmod action from a list
 All test results:

 1..1
 ok 1 9aa8 Get a single skbmod action from a list

Fixes: cf797ac49b ("tc-testing: Add test cases for police and skbmod")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04 18:39:03 -05:00
Linus Torvalds 7225a44278 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti fixes from Thomas Gleixner:
 "Three fixes related to melted spectrum:

   - Sync the cpu_entry_area page table to initial_page_table on 32 bit.

     Otherwise suspend/resume fails because resume uses
     initial_page_table and triggers a triple fault when accessing the
     cpu entry area.

   - Zero the SPEC_CTL MRS on XEN before suspend to address a
     shortcoming in the hypervisor.

   - Fix another switch table detection issue in objtool"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
  objtool: Fix another switch table detection issue
  x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
2018-03-04 11:40:16 -08:00
Shuah Khan ba004a2955 selftests: memory-hotplug: fix emit_tests regression
Commit 16c513b134
("selftests: memory-hotplug: silence test command echo")

introduced regression in emit_tests and results in the following
failure when selftests are installed and run. Fix it.

Running tests in memory-hotplug
========================================
./run_kselftest.sh: line 121: @./mem-on-off-test.sh: No such file or
directory
selftests: memory-hotplug [FAIL]

Fixes: 16c513b134 (selftests: memory-hotplug: silence test command echo")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-03-02 10:12:59 -07:00
David S. Miller a5f7b0eeb2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-02-28

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Add schedule points and reduce the number of loop iterations
   the test_bpf kernel module is performing in order to not hog
   the CPU for too long, from Eric.

2) Fix an out of bounds access in tail calls in the ppc64 BPF
   JIT compiler, from Daniel.

3) Fix a crash on arm64 on unaligned BPF xadd operations that
   could be triggered via interpreter and JIT, from Daniel.

Please not that once you merge net into net-next at some point, there
is a minor merge conflict in test_verifier.c since test cases had
been added at the end in both trees. Resolution is trivial: keep all
the test cases from both trees.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-01 21:42:07 -05:00
Michael Ellerman cd4a6f3ab4 selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable
The subpage_prot syscall is only functional when the system is using
the Hash MMU. Since commit 5b2b807147 ("powerpc/mm: Invalidate
subpage_prot() system call on radix platforms") it returns ENOENT when
the Radix MMU is active. Currently this just makes the test fail.

Additionally the syscall is not available if the kernel is built with
4K pages, or if CONFIG_PPC_SUBPAGE_PROT=n, in which case it returns
ENOSYS because the syscall is missing entirely.

So check explicitly for ENOENT and ENOSYS and skip if we see either of
those.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-02 11:37:04 +11:00
Linus Torvalds 3499de32fa Merge tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
 "Fixes for various problems in test output, compile errors, and missing
  configs"

* tag 'linux-kselftest-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: vm: update .gitignore with new test
  selftests: memory-hotplug: silence test command echo
  selftests/futex: Fix line continuation in Makefile
  selftests: memfd: add config fragment for fuse
  selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
  selftests/android: Fix line continuation in Makefile
  selftest/vDSO: fix O=
  selftests: sync: missing CFLAGS while compiling
2018-02-28 13:38:52 -08:00
Josh Poimboeuf 1402fd8ed7 objtool: Fix another switch table detection issue
Continue the switch table detection whack-a-mole.  Add a check to
distinguish KASAN data reads from switch data reads.  The switch jump
tables in .rodata have relocations associated with them.

This fixes the following warning:

  crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
2018-02-28 16:03:19 +01:00
Michael Ellerman b7abbd5a35 selftests/powerpc: Fix missing clean of pmu/lib.o
The tm-resched-dscr test links against pmu/lib.o, but we don't have a
rule to clean pmu/lib.o. This can lead to a build break if you build
for big endian and then little, or vice versa.

Fix it by making tm-resched-dscr depend on pmu/lib.c, causing the code
to be built directly in, meaning no .o is generated.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-28 22:28:35 +11:00
Shuah Khan f6869826de selftests: vm: update .gitignore with new test
Update .gitignore with new test.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26 16:09:50 -07:00
Shuah Khan 16c513b134 selftests: memory-hotplug: silence test command echo
Silence the following command being printed while running test.

./mem-on-off-test.sh -r 2 && echo "selftests: memory-hotplug [PASS]" ||
echo "selftests: memory-hotplug [FAIL]"

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26 16:09:49 -07:00
Daniel Díaz 067b25a563 selftests/futex: Fix line continuation in Makefile
The Makefile lacks a couple of line continuation backslashes
in an `if' clause, which produces an error when make versions
prior to 4.x are used for building the tests.

  $ make
  make[1]: Entering directory `/[...]/linux/tools/testing/selftests/futex'
  /bin/sh: -c: line 5: syntax error: unexpected end of file
  make[1]: *** [all] Error 1
  make[1]: Leaving directory `/[...]/linux/tools/testing/selftests/futex'
  make: *** [all] Error 2

Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2018-02-26 16:09:49 -07:00
Linus Torvalds 6f70eb2b00 Merge branch 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-dax
Pull idr fixes from Matthew Wilcox:
 "One test-suite build fix for you and one run-time regression fix.

  The regression fix includes new tests to make sure they don't pop back
  up."

* 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-dax:
  idr: Fix handling of IDs above INT_MAX
  radix tree test suite: Fix build
2018-02-26 13:22:45 -08:00
Matthew Wilcox 4b0ad07653 idr: Fix handling of IDs above INT_MAX
Khalid reported that the kernel selftests are currently failing:

selftests: test_bpf.sh
========================================
test_bpf: [FAIL]
not ok 1..8 selftests:  test_bpf.sh [FAIL]

He bisected it to 6ce711f275 ("idr: Make
1-based IDRs more efficient").

The root cause is doing a signed comparison in idr_alloc_u32() instead
of an unsigned comparison.  I went looking for any similar problems and
found a couple (which would each result in the failure to warn in two
situations that aren't supposed to happen).

I knocked up a few test-cases to prove that I was right and added them
to the test-suite.

Reported-by: Khalid Aziz <khalid.aziz@oracle.com>
Tested-by: Khalid Aziz <khalid.aziz@oracle.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2018-02-26 14:39:30 -05:00
Linus Torvalds 85a2d939c0 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
 "Yet another pile of melted spectrum related changes:

   - sanitize the array_index_nospec protection mechanism: Remove the
     overengineered array_index_nospec_mask_check() magic and allow
     const-qualified types as index to avoid temporary storage in a
     non-const local variable.

   - make the microcode loader more robust by properly propagating error
     codes. Provide information about new feature bits after micro code
     was updated so administrators can act upon.

   - optimizations of the entry ASM code which reduce code footprint and
     make the code simpler and faster.

   - fix the {pmd,pud}_{set,clear}_flags() implementations to work
     properly on paravirt kernels by removing the address translation
     operations.

   - revert the harmful vmexit_fill_RSB() optimization

   - use IBRS around firmware calls

   - teach objtool about retpolines and add annotations for indirect
     jumps and calls.

   - explicitly disable jumplabel patching in __init code and handle
     patching failures properly instead of silently ignoring them.

   - remove indirect paravirt calls for writing the speculation control
     MSR as these calls are obviously proving the same attack vector
     which is tried to be mitigated.

   - a few small fixes which address build issues with recent compiler
     and assembler versions"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()
  KVM/x86: Remove indirect MSR op calls from SPEC_CTRL
  objtool, retpolines: Integrate objtool with retpoline support more closely
  x86/entry/64: Simplify ENCODE_FRAME_POINTER
  extable: Make init_kernel_text() global
  jump_label: Warn on failed jump_label patching attempt
  jump_label: Explicitly disable jump labels in __init code
  x86/entry/64: Open-code switch_to_thread_stack()
  x86/entry/64: Move ASM_CLAC to interrupt_entry()
  x86/entry/64: Remove 'interrupt' macro
  x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry()
  x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry
  x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function
  x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
  objtool: Add module specific retpoline rules
  objtool: Add retpoline validation
  objtool: Use existing global variables for options
  x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute()
  x86/boot, objtool: Annotate indirect jump in secondary_startup_64()
  x86/paravirt, objtool: Annotate indirect calls
  ...
2018-02-26 09:34:21 -08:00
Linus Torvalds d4858aaf6b s390:
- optimization for the exitless interrupt support that was merged in 4.16-rc1
 - improve the branch prediction blocking for nested KVM
 - replace some jump tables with switch statements to improve expoline performance
 - fixes for multiple epoch facility
 
 ARM:
 - fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs
 - make sure we can build 32-bit KVM/ARM with gcc-8.
 
 x86:
 - fixes for AMD SEV
 - fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup
 - fixes for async page fault migration
 - small optimization to PV TLB flush (new in 4.16-rc1)
 - syzkaller fixes
 
 Generic:
 - compiler warning fixes
 - syzkaller fixes
 - more improvements to the kvm_stat tool
 
 Two more small Spectre fixes are going to reach you via Ingo.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEbBAABAgAGBQJakL/fAAoJEL/70l94x66Dzp4H9j6qMzgOTAQ0bYmupQp81tad
 V8lNabVSNi0UBYwk2D44oNigtNjQckE18KGnjuJ4tZW+GZ+D7zrrHrKXWtATXgxP
 SIfHj+raSd/lgJoy6HLu/N0oT6wS+PdZMYFgSu600Vi618lGKGX1SIAwBhjoxdMX
 7QKKAuPcDZ1qgGddhWaLnof28nQQEWcCAVfFeVojmM0TyhvSbgSysh/Gq10ydybh
 NVUfgP3fzLtT9gVngX/ZtbogNkltPYmucpI+wT3nWfsgBic783klfWrfpnC/GM85
 OeXLVhHwVLG6tXUGhb4ULO+F9HwRGX31+er6iIxmwH9PvqnQMRcQ0Xxf2gbNXg==
 =YmH6
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "s390:
   - optimization for the exitless interrupt support that was merged in 4.16-rc1
   - improve the branch prediction blocking for nested KVM
   - replace some jump tables with switch statements to improve expoline performance
   - fixes for multiple epoch facility

  ARM:
   - fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs
   - make sure we can build 32-bit KVM/ARM with gcc-8.

  x86:
   - fixes for AMD SEV
   - fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup
   - fixes for async page fault migration
   - small optimization to PV TLB flush (new in 4.16-rc1)
   - syzkaller fixes

  Generic:
   - compiler warning fixes
   - syzkaller fixes
   - more improvements to the kvm_stat tool

  Two more small Spectre fixes are going to reach you via Ingo"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (40 commits)
  KVM: SVM: Fix SEV LAUNCH_SECRET command
  KVM: SVM: install RSM intercept
  KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command
  include: psp-sev: Capitalize invalid length enum
  crypto: ccp: Fix sparse, use plain integer as NULL pointer
  KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled
  x86/kvm: Make parse_no_xxx __init for kvm
  KVM: x86: fix backward migration with async_PF
  kvm: fix warning for non-x86 builds
  kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
  tools/kvm_stat: print 'Total' line for multiple events only
  tools/kvm_stat: group child events indented after parent
  tools/kvm_stat: separate drilldown and fields filtering
  tools/kvm_stat: eliminate extra guest/pid selection dialog
  tools/kvm_stat: mark private methods as such
  tools/kvm_stat: fix debugfs handling
  tools/kvm_stat: print error on invalid regex
  tools/kvm_stat: fix crash when filtering out all non-child trace events
  tools/kvm_stat: avoid 'is' for equality checks
  tools/kvm_stat: use a more pythonic way to iterate over dictionaries
  ...
2018-02-26 09:28:35 -08:00
Michael Ellerman 192b2e742c selftests/powerpc: Skip tm-trap if transactional memory is not enabled
Some processor revisions do not support transactional memory, and
additionally kernel support can be disabled. In either case the
tm-trap test should be skipped, otherwise it will fail with a SIGILL.

Fixes: a08082f8e4 ("powerpc/selftests: Check endianness on trap in TM")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-26 13:18:25 +11:00
Matthew Wilcox 3d4d5d6186 radix tree test suite: Fix build
- Add an empty linux/compiler_types.h (now being included by kconfig.h)
 - Add __GFP_ZERO
 - Add kzalloc
 - Test __GFP_DIRECT_RECLAIM instead of __GFP_NOWARN

Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
2018-02-25 06:00:11 -05:00
Stefan Raspl 6789af030a tools/kvm_stat: print 'Total' line for multiple events only
The 'Total' line looks a bit weird when we have a single event only. This
can happen e.g. due to filters. Therefore suppress when there's only a
single event in the output.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:46 +01:00
Stefan Raspl df72ecfc79 tools/kvm_stat: group child events indented after parent
We keep the current logic that sorts all events (parent and child), but
re-shuffle the events afterwards, grouping the children after the
respective parent. Note that the percentage column for child events
gives the percentage of the parent's total.
Since we rework the logic anyway, we modify the total average
calculation to use the raw numbers instead of the (rounded) averages.
Note that this can result in differing numbers (between total average
and the sum of the individual averages) due to rounding errors.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:45 +01:00
Stefan Raspl 18e8f4100e tools/kvm_stat: separate drilldown and fields filtering
Drilldown (i.e. toggle display of child trace events) was implemented by
overriding the fields filter. This resulted in inconsistencies: E.g. when
drilldown was not active, adding a filter that also matches child trace
events would not only filter fields according to the filter, but also add
in the child trace events matching the filter. E.g. on x86, setting
'kvm_userspace_exit' as the fields filter after startup would result in
display of kvm_userspace_exit(DCR), although that wasn't previously
present - not exactly what one would expect from a filter.
This patch addresses the issue by keeping drilldown and fields filter
separate. While at it, we also fix a PEP8 issue by adding a blank line
at one place (since we're in the area...).
We implement this by adding a framework that also allows to define a
taxonomy among the debugfs events to identify child trace events. I.e.
drilldown using 'x' can now also work with debugfs. A respective parent-
child relationship is only known for S390 at the moment, but could be
added adjusting other platforms' ARCH.dbg_is_child() methods
accordingly.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:44 +01:00
Stefan Raspl 516f1190a1 tools/kvm_stat: eliminate extra guest/pid selection dialog
We can do with a single dialog that takes both, pids and guest names.
Note that we keep both interactive commands, 'p' and 'g' for now, to
avoid confusion among users used to a specific key.

While at it, we improve on some minor glitches regarding curses usage,
e.g. cursor still visible when not supposed to be.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:44 +01:00
Stefan Raspl c0e8c21eae tools/kvm_stat: mark private methods as such
Helps quite a bit reading the code when it's obvious when a method is
intended for internal use only.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:43 +01:00
Stefan Raspl 1fd6a708c8 tools/kvm_stat: fix debugfs handling
Te checks for debugfs assumed that debugfs is always mounted at
/sys/kernel/debug - which is likely, but not guaranteed. This is addressed
by checking /proc/mounts for the actual location.
Furthermore, when debugfs was mounted, but the kvm module not loaded, a
misleading error pointing towards debugfs not present was given.
To reproduce,
(a) run kvm_stat with debugfs mounted at a place different from
    /sys/kernel/debug
(b) run kvm_stat with debugfs mounted but kvm module not loaded

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:42 +01:00
Stefan Raspl 1cd8bfb1ed tools/kvm_stat: print error on invalid regex
Entering an invalid regular expression did not produce any indication of an
error so far.
To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket).

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:41 +01:00
Stefan Raspl 3df33a0f34 tools/kvm_stat: fix crash when filtering out all non-child trace events
When we apply a filter that will only leave child trace events, we
receive a ZeroDivisionError when calculating the percentages.
In that case, provide percentages based on child events only.
To reproduce, run 'kvm_stat -f .*[\(].*'.

Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:41 +01:00
Marc Hartmayer 369d5a85bb tools/kvm_stat: avoid 'is' for equality checks
Use '==' for equality checks and 'is' when comparing identities.

An example where '==' and 'is' behave differently:
>>> a = 4242
>>> a == 4242
True
>>> a is 4242
False

Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:40 +01:00
Marc Hartmayer 0eb578009a tools/kvm_stat: use a more pythonic way to iterate over dictionaries
If it's clear that the values of a dictionary will be used then use
the '.items()' method.

Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
[Include fix for logging mode by Stefan Raspl]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:39 +01:00
Marc Hartmayer 006f1548ac tools/kvm_stat: use a namedtuple for storing the values
Use a namedtuple for storing the values as it allows to access the
fields of a tuple via names. This makes the overall code much easier
to read and to understand. Access by index is still possible as
before.

Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:39 +01:00
Marc Hartmayer faa312a543 tools/kvm_stat: simplify the sortkey function
The 'sortkey' function references a value in its enclosing
scope (closure). This is not common practice for a sort key function
so let's replace it. Additionally, the function 'sorted' has already a
parameter for reversing the result therefore the inversion of the
values is unneeded. The check for stats[x][1] is also superfluous as
it's ensured that this value is initialized with 0.

Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Tested-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-24 01:43:38 +01:00
Linus Torvalds 9cb9c07d6b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh.

 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang.

 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song.

 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang.

 5) Fix potential deadlocks in netfilter getsockopt() code paths, from
    Paolo Abeni.

 6) Netfilter stackpointer size checks really are needed to validate
    user input, from Florian Westphal.

 7) Missing timer init in x_tables, from Paolo Abeni.

 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg.

 9) When an ibmvnic device is brought down then back up again, it can be
    sent queue entries from a previous session, handle this properly
    instead of crashing. From Thomas Falcon.

10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman.

11) When we are dumping filters in cls_api, the output SKB is empty, and
    the filter we are dumping is too large for the space in the SKB, we
    should return -EMSGSIZE like other netlink dump operations do.
    Otherwise userland has no signal that is needs to increase the size
    of its read buffer. From Roman Kapl.

12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer.

13) Module refcount leak in netlink when a dump start fails, from Jason
    Donenfeld.

14) Handle sub-optimal GSO sizes better in TCP BBR congestion control,
    from Eric Dumazet.

15) Releasing bpf per-cpu arraymaps can take a long time, add a
    condtional scheduling point. From Eric Dumazet.

16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From
    Daniel Borkmann.

17) Fix page leak in gianfar driver, from Andy Spencer.

18) Missed clearing of estimator scratch buffer, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  net_sched: gen_estimator: fix broken estimators based on percpu stats
  gianfar: simplify FCS handling and fix memory leak
  ipv6 sit: work around bogus gcc-8 -Wrestrict warning
  macvlan: fix use-after-free in macvlan_common_newlink()
  bpf, arm64: fix out of bounds access in tail call
  bpf, x64: implement retpoline for tail call
  rxrpc: Fix send in rxrpc_send_data_packet()
  net: aquantia: Fix error handling in aq_pci_probe()
  bpf: fix rcu lockdep warning for lpm_trie map_free callback
  bpf: add schedule points in percpu arrays management
  regulatory: add NUL to request alpha2
  ibmvnic: Fix early release of login buffer
  net/smc9194: Remove bogus CONFIG_MAC reference
  net: ipv4: Set addr_type in hash_keys for forwarded case
  tcp_bbr: better deal with suboptimal GSO
  smsc75xx: fix smsc75xx_set_features()
  netlink: put module reference if dump start fails
  selftests/bpf/test_maps: exit child process without error in ENOMEM case
  selftests/bpf: update gitignore with test_libbpf_open
  selftests/bpf: tcpbpf_kern: use in6_* macros from glibc
  ..
2018-02-23 15:14:17 -08:00
Linus Torvalds 2eb02aa94f Merge branch 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem fixes from James Morris:

 - keys fixes via David Howells:
      "A collection of fixes for Linux keyrings, mostly thanks to Eric
       Biggers:

        - Fix some PKCS#7 verification issues.

        - Fix handling of unsupported crypto in X.509.

        - Fix too-large allocation in big_key"

 - Seccomp updates via Kees Cook:
      "These are fixes for the get_metadata interface that landed during
       -rc1. While the new selftest is strictly not a bug fix, I think
       it's in the same spirit of avoiding bugs"

 - an IMA build fix from Randy Dunlap

* 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  integrity/security: fix digsig.c build error with header file
  KEYS: Use individual pages in big_key for crypto buffers
  X.509: fix NULL dereference when restricting key with unsupported_sig
  X.509: fix BUG_ON() when hash algorithm is unsupported
  PKCS#7: fix direct verification of SignerInfo signature
  PKCS#7: fix certificate blacklisting
  PKCS#7: fix certificate chain verification
  seccomp: add a selftest for get_metadata
  ptrace, seccomp: tweak get_metadata behavior slightly
  seccomp, ptrace: switch get_metadata types to arch independent
2018-02-23 15:04:24 -08:00
Daniel Borkmann ca36960211 bpf: allow xadd only on aligned memory
The requirements around atomic_add() / atomic64_add() resp. their
JIT implementations differ across architectures. E.g. while x86_64
seems just fine with BPF's xadd on unaligned memory, on arm64 it
triggers via interpreter but also JIT the following crash:

  [  830.864985] Unable to handle kernel paging request at virtual address ffff8097d7ed6703
  [...]
  [  830.916161] Internal error: Oops: 96000021 [#1] SMP
  [  830.984755] CPU: 37 PID: 2788 Comm: test_verifier Not tainted 4.16.0-rc2+ #8
  [  830.991790] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.29 07/17/2017
  [  830.998998] pstate: 80400005 (Nzcv daif +PAN -UAO)
  [  831.003793] pc : __ll_sc_atomic_add+0x4/0x18
  [  831.008055] lr : ___bpf_prog_run+0x1198/0x1588
  [  831.012485] sp : ffff00001ccabc20
  [  831.015786] x29: ffff00001ccabc20 x28: ffff8017d56a0f00
  [  831.021087] x27: 0000000000000001 x26: 0000000000000000
  [  831.026387] x25: 000000c168d9db98 x24: 0000000000000000
  [  831.031686] x23: ffff000008203878 x22: ffff000009488000
  [  831.036986] x21: ffff000008b14e28 x20: ffff00001ccabcb0
  [  831.042286] x19: ffff0000097b5080 x18: 0000000000000a03
  [  831.047585] x17: 0000000000000000 x16: 0000000000000000
  [  831.052885] x15: 0000ffffaeca8000 x14: 0000000000000000
  [  831.058184] x13: 0000000000000000 x12: 0000000000000000
  [  831.063484] x11: 0000000000000001 x10: 0000000000000000
  [  831.068783] x9 : 0000000000000000 x8 : 0000000000000000
  [  831.074083] x7 : 0000000000000000 x6 : 000580d428000000
  [  831.079383] x5 : 0000000000000018 x4 : 0000000000000000
  [  831.084682] x3 : ffff00001ccabcb0 x2 : 0000000000000001
  [  831.089982] x1 : ffff8097d7ed6703 x0 : 0000000000000001
  [  831.095282] Process test_verifier (pid: 2788, stack limit = 0x0000000018370044)
  [  831.102577] Call trace:
  [  831.105012]  __ll_sc_atomic_add+0x4/0x18
  [  831.108923]  __bpf_prog_run32+0x4c/0x70
  [  831.112748]  bpf_test_run+0x78/0xf8
  [  831.116224]  bpf_prog_test_run_xdp+0xb4/0x120
  [  831.120567]  SyS_bpf+0x77c/0x1110
  [  831.123873]  el0_svc_naked+0x30/0x34
  [  831.127437] Code: 97fffe97 17ffffec 00000000 f9800031 (885f7c31)

Reason for this is because memory is required to be aligned. In
case of BPF, we always enforce alignment in terms of stack access,
but not when accessing map values or packet data when the underlying
arch (e.g. arm64) has CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS set.

xadd on packet data that is local to us anyway is just wrong, so
forbid this case entirely. The only place where xadd makes sense in
fact are map values; xadd on stack is wrong as well, but it's been
around for much longer. Specifically enforce strict alignment in case
of xadd, so that we handle this case generically and avoid such crashes
in the first place.

Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-23 14:33:39 -08:00
Daniel Borkmann 16338a9b3a bpf, arm64: fix out of bounds access in tail call
I recently noticed a crash on arm64 when feeding a bogus index
into BPF tail call helper. The crash would not occur when the
interpreter is used, but only in case of JIT. Output looks as
follows:

  [  347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510
  [...]
  [  347.043065] [fffb850e96492510] address between user and kernel address ranges
  [  347.050205] Internal error: Oops: 96000004 [#1] SMP
  [...]
  [  347.190829] x13: 0000000000000000 x12: 0000000000000000
  [  347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10
  [  347.201427] x9 : 0000000000000000 x8 : 0000000000000000
  [  347.206726] x7 : 0000000000000000 x6 : 001c991738000000
  [  347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a
  [  347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500
  [  347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500
  [  347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61)
  [  347.235221] Call trace:
  [  347.237656]  0xffff000002f3a4fc
  [  347.240784]  bpf_test_run+0x78/0xf8
  [  347.244260]  bpf_prog_test_run_skb+0x148/0x230
  [  347.248694]  SyS_bpf+0x77c/0x1110
  [  347.251999]  el0_svc_naked+0x30/0x34
  [  347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b)
  [...]

In this case the index used in BPF r3 is the same as in r1
at the time of the call, meaning we fed a pointer as index;
here, it had the value 0xffff808fd7cf0500 which sits in x2.

While I found tail calls to be working in general (also for
hitting the error cases), I noticed the following in the code
emission:

  # bpftool p d j i 988
  [...]
  38:   ldr     w10, [x1,x10]
  3c:   cmp     w2, w10
  40:   b.ge    0x000000000000007c              <-- signed cmp
  44:   mov     x10, #0x20                      // #32
  48:   cmp     x26, x10
  4c:   b.gt    0x000000000000007c
  50:   add     x26, x26, #0x1
  54:   mov     x10, #0x110                     // #272
  58:   add     x10, x1, x10
  5c:   lsl     x11, x2, #3
  60:   ldr     x11, [x10,x11]                  <-- faulting insn (f86b694b)
  64:   cbz     x11, 0x000000000000007c
  [...]

Meaning, the tests passed because commit ddb55992b0 ("arm64:
bpf: implement bpf_tail_call() helper") was using signed compares
instead of unsigned which as a result had the test wrongly passing.

Change this but also the tail call count test both into unsigned
and cap the index as u32. Latter we did as well in 90caccdd8c
("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here,
too. Tested on HiSilicon Hi1616.

Result after patch:

  # bpftool p d j i 268
  [...]
  38:	ldr	w10, [x1,x10]
  3c:	add	w2, w2, #0x0
  40:	cmp	w2, w10
  44:	b.cs	0x0000000000000080
  48:	mov	x10, #0x20                  	// #32
  4c:	cmp	x26, x10
  50:	b.hi	0x0000000000000080
  54:	add	x26, x26, #0x1
  58:	mov	x10, #0x110                 	// #272
  5c:	add	x10, x1, x10
  60:	lsl	x11, x2, #3
  64:	ldr	x11, [x10,x11]
  68:	cbz	x11, 0x0000000000000080
  [...]

Fixes: ddb55992b0 ("arm64: bpf: implement bpf_tail_call() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-22 16:06:28 -08:00