Commit Graph

13 Commits

Author SHA1 Message Date
Amelie Delaunay b72252b658 rtc: stm32: add stm32mp1 rtc support
This patch adds support for stm32mp1 RTC.
Some common registers with previous RTC version have a different offset.
It is the case for Control Register (CR) and ALaRMA Register (ALRMAR).
There are also new registers regarding event flags: now, Alarm event flag
is in Status Register (SR) and write 1 in Status Clear Register (SCR) is
required to clear the event.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-22 20:10:54 +02:00
Amelie Delaunay 02b0cc345c rtc: stm32: rework register management to prepare other version of RTC
This patch reworks register/bits management because next version of RTC
uses the same way of working but with different register's offset or bits
moved in new registers.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-22 20:10:52 +02:00
Amelie Delaunay 819cbde521 rtc: stm32: fix misspelling and misalignment issues
This patch cleans the following checkpatch complaints:

CHECK: 'initalized' may be misspelled - perhaps 'initialized'?
#644: FILE: drivers/rtc/rtc-stm32.c:644:
+	 * the calendar has been initalized or not. INITS flag is reset by a

CHECK: Alignment should match open parenthesis
#669: FILE: drivers/rtc/rtc-stm32.c:669:
+	rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
+			&stm32_rtc_ops, THIS_MODULE);

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-22 20:10:50 +02:00
Amelie Delaunay 22cb47c1ea rtc: stm32: get DBP register and mask from DT st, syscfg property
RTC driver should not be aware of the PWR registers offset and bits
position. Furthermore, we can imagine that DBP relative register and bit
mask could change depending on the SoC.
So this patch introduces 2 parameters, dbp_reg and dbp_mask, allowing to
get PWR_CR and PWR_CR_DBP from device tree. And it prepares next RTC
version, backup domain write protection is disabled only if needed.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-06 22:22:43 +02:00
Amelie Delaunay d213217d21 rtc: stm32: fix alarm interrupt flags by removing IRQF_TRIGGER_RISING
RTC alarm interrupt is active high and already configured by device tree.
So remove IRQF_TRIGGER_RISING from driver.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-06 22:22:40 +02:00
Amelie Delaunay 2480564572 rtc: stm32: fix copyright and adopt SPDX identifier
Fix copyright by removing "SA" and "for STMicroelectronics", not required.
Adopt SPDX identifier.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-06 22:22:39 +02:00
Benjamin Gaignard 9f33399c90 rtc: stm32: Fix copyright
Uniformize STMicroelectronics copyrights header

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
CC: Amelie Delaunay <amelie.delaunay@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-29 22:20:56 +01:00
Amelie Delaunay 9a6757eadc rtc: stm32: add STM32H7 RTC support
This patch adds support for STM32H7 RTC. On STM32H7, the RTC bus interface
clock (APB clock) needs to be enabled.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06 22:52:54 +02:00
Amelie Delaunay 1d70ba3bfb rtc: stm32: fix comparison warnings
This patches fixes comparison between signed and unsigned values as it
could produce an incorrect result when the signed value is converted to
unsigned:

drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_valid_alrm':
drivers/rtc/rtc-stm32.c:404:21: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
  if ((((tm->tm_year > cur_year) &&
...

It also fixes comparison always true or false due to the fact that unsigned
value is compared against zero with >= or <:

drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_init':
drivers/rtc/rtc-stm32.c:514:35: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
  for (pred_a = pred_a_max; pred_a >= 0; pred_a-- ) {

drivers/rtc/rtc-stm32.c:530:44: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
     (rate - ((pred_a + 1) * (pred_s + 1)) < 0) ?

Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-23 00:47:15 +01:00
Amelie Delaunay a560c52763 rtc: stm32: use 0 instead of ~PWR_CR_DBP in regmap_update_bits
Using the ~ operator on a BIT() constant results in a large 'unsigned long'
constant that won't fit into an 'unsigned int' function argument on 64-bit
architectures, resulting in a harmless build warning in x86 allmodconfig:

drivers/rtc/rtc-stm32.c: In function 'stm32_rtc_probe':
drivers/rtc/rtc-stm32.c:651:51: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
  regmap_update_bits(rtc->dbp, PWR_CR, PWR_CR_DBP, ~PWR_CR_DBP);

As PWR_CR_DBP mask prevents other bits to be cleared, replace all
~PWR_CR_DBP by 0.

Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-23 00:47:15 +01:00
Arnd Bergmann 224763ef72 rtc: stm32: fix building without CONFIG_OF
The new driver has a stray #ifdef in it that causes a build error:

drivers/rtc/rtc-stm32.c:718:21: error: 'stm32_rtc_of_match' undeclared here (not in a function); did you mean 'stm32_rtc_pm_ops'?

As the #ifdef serves no purpose here, let's just remove it.

Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13 17:51:53 +01:00
Arnd Bergmann 0404abb221 rtc: stm32: remove __exit annotation on remove callback
The remove function can be called at runtime for a manual 'unbind'
operation and must not be left out from a built-in driver, as kbuild
complains:

`stm32_rtc_remove' referenced in section `.data.stm32_rtc_driver' of drivers/rtc/rtc-stm32.o: defined in discarded section `.exit.text' of drivers/rtc/rtc-stm32.o

This removes the extraneous annotation.

Fixes: 4e64350f42 ("rtc: add STM32 RTC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13 17:51:52 +01:00
Amelie Delaunay 4e64350f42 rtc: add STM32 RTC driver
This patch adds support for the STM32 RTC.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13 01:40:31 +01:00