Commit Graph

17 Commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz 187a60358a video: fbdev: remove unused sh_mobile_meram driver
Since commit a521422ea4  ("ARM: shmobile: mackerel: Remove Legacy C
board code") MERAM functionality is unused. Remove it.

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-05-14 15:47:30 +02:00
Bartlomiej Zolnierkiewicz 745f8c14e3 video: fbdev: remove unused auo_k190xfb drivers
auo_k1900fb and auo_k1901fb drivers have been introduced six
years ago by following commits:

commit 2c8304d312 ("video: auo_k190x: add code shared by controller drivers")
commit 96b1d500e0 ("video: auo_k190x: add driver for AUO-K1900 variant")
commit 53027cdf2a ("video: auo_k190x: add driver for AUO-K1901 variant")

They never had any in-kernel user so just remove them (since
they are platform drivers they need corresponding platform
devices to be registered by kernel and it has never happened).

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2018-05-14 15:47:30 +02:00
Arnd Bergmann e3ed8b436b fbdev: remove blackfin drivers
The blackfin architecture is getting removed, this removes the
associated fbdev drivers as well.

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:44 +02:00
Linus Torvalds e1d1ea549b fbdev changes for v4.15:
- convert timers to use timer_setup() (Kees Cook, Thierry Reding)
 
 - fix panels support on iMX boards in mxsfb driver (Stefan Agner)
 
 - fix timeout on EDID read in udlfb driver (Ladislav Michl)
 
 - add missing modes to fix out of bounds access in controlfb driver
   (Geert Uytterhoeven)
 
 - update initialisation paths in sa1100fb driver to be more robust
   (Russell King)
 
 - fix error handling path of ->probe method in au1200fb driver
   (Christophe JAILLET)
 
 - fix handling of cases when either panel or crt is defined in sm501fb
   driver (Sudip Mukherjee, Colin Ian King)
 
 - add ability to the Goldfish FB driver to be recognized by OS via DT
   (Aleksandar Markovic)
 
 - structures constifications (Bhumika Goyal)
 
 - misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)
 
 - misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)
 
 - remove dead igafb driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJaEto8AAoJEH4ztj+gR8ILrLkP+wcGcsZHGqte7bpwnEpQa/D8
 x0nlP3qNdx9pGDhZRZahexSmnLYajwg22iO3HdbuCy7k/WWtv6R+BREKQ1yEIHUP
 kmH5QMgKunWs36PITuxVRQ9GDwZK1pk+XAR0M3XBUOw8OKoqwiiX8z+5c3YxWQ4X
 0VgEBEijnZs9exZgTY0UNVBKzy4GC9HXRjDW7cicOSVX7TW7yURU2wL79ANqW+Ba
 eelbaPCDD3aPIFRWWKI/BH467Jyqnrol0u08ZZcqzMo92TQHmoYOctVuYlp3WM1j
 HOi/N/fdhKUPoadkr1av1VUQAIN+Cx+8lFAaihilaAbaIcd515UWu4Jqrt8SjTZ2
 xVfitJ58EaR++EJjfrwxyOkSIWlG6mH5y3IYwvV3N6WGiqhy5srue6MzI/ofX+Iz
 h2HNVXcIlMJmtCmOVUkk2zECyCFPN0S4+eTrRUUdPVQBCWNfqKm6mS2/p39P6mrE
 HfE4Jav/EXn7p2UBVRt8EYbWcdLCuIPdGc+buA+7z0Nu4AsPUMtkiuLpuKtE0sXs
 bq0Vv7ac07ZFxTjfnsPPrgBE9aBL5jtC8jnez2IRVMppfTIgah9xm32wQh43WzIM
 JgH4JxKaQgirmMHE3GGZASh4f9rj5M/Ia0ybQOVbwtxykKaFG8oIYyotJVP7MwDK
 +fl/CPKXfbpijliE5mDz
 =afFm
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-v4.15' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:
 "There is nothing really major here (though removal of the dead igafb
  driver stands out in diffstat).

  Summary:

   - convert timers to use timer_setup() (Kees Cook, Thierry Reding)

   - fix panels support on iMX boards in mxsfb driver (Stefan Agner)

   - fix timeout on EDID read in udlfb driver (Ladislav Michl)

   - add missing modes to fix out of bounds access in controlfb driver
     (Geert Uytterhoeven)

   - update initialisation paths in sa1100fb driver to be more robust
     (Russell King)

   - fix error handling path of ->probe method in au1200fb driver
     (Christophe JAILLET)

   - fix handling of cases when either panel or crt is defined in
     sm501fb driver (Sudip Mukherjee, Colin Ian King)

   - add ability to the Goldfish FB driver to be recognized by OS via DT
     (Aleksandar Markovic)

   - structures constifications (Bhumika Goyal)

   - misc fixes (Allen Pais, Gustavo A. R. Silva, Dan Carpenter)

   - misc cleanups (Colin Ian King, Himanshu Jha, Markus Elfring)

   - remove dead igafb driver"

* tag 'fbdev-v4.15' of git://github.com/bzolnier/linux: (42 commits)
  OMAPFB: prevent buffer underflow in omapfb_parse_vram_param()
  video: fbdev: sm501fb: fix potential null pointer dereference on fbi
  fbcon: Initialize ops->info early
  video: fbdev: Convert timers to use timer_setup()
  video: fbdev: pxa3xx_gcu: Convert timers to use timer_setup()
  fbdev: controlfb: Add missing modes to fix out of bounds access
  video: fbdev: sis_main: mark expected switch fall-throughs
  video: fbdev: cirrusfb: mark expected switch fall-throughs
  video: fbdev: aty: radeon_pm: mark expected switch fall-throughs
  video: fbdev: sm501fb: mark expected switch fall-through in sm501fb_blank_crt
  video: fbdev: intelfb: remove redundant variables
  video/fbdev/dnfb: Use common error handling code in dnfb_probe()
  sm501fb: suspend and resume fb if it exists
  sm501fb: unregister framebuffer only if registered
  sm501fb: deallocate colormap only if allocated
  video: goldfishfb: Add support for device tree bindings
  Documentation: Add device tree binding for Goldfish FB driver
  video: udlfb: Fix read EDID timeout
  video: fbdev: remove dead igafb driver
  video: fbdev: mxsfb: fix pixelclock polarity
  ...
2017-11-20 21:50:24 -10:00
Bartlomiej Zolnierkiewicz 1e7d4beba2 video: fbdev: remove dead igafb driver
igafb driver hasn't compiled since at least kernel v2.6.34 as
commit 6016a363f6 ("of: unify phandle name in struct device_node")
missed updating igafb.c to use dp->phandle instead of dp->node.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-11-09 18:09:30 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Krzysztof Kozlowski a38719b3dc video: fbdev: exynos: Remove old non-working MIPI driver
The old non-DRM Exynos MIPI driver does not support DeviceTree and
requires board files.  Our platforms do not provide such so the driver
is not usable since a long time ago.  All features provided by the
driver (and associated s6e8ax0 panel driver) are already supported by
newer DRM version so the old code can be removed.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27 11:05:29 +03:00
Linus Walleij 1d3f0cbe0d video: ARM CLCD: add special board and panel hooks for Nomadik
In the .board_init() callback will set up a mux register in
the Nomadik system controller. It so happens that the platform
has two display output engines, and we have to poke a bit in
a special register to make sure the right engine is muxed in
as they are mutually exclusive.

The Nomadik CLCD variant is instantiated on a platform where
it is combined with a 800x480 TPO WVGA display. In the
.panel_init() hook we will detect this display from the
compatible string and set it up. We also add .enable() and
.disable() callbacks for it as the sleep state is software
controlled.

The display is connected with a special 3-wire serial bus
(this is sadly neither I2C or SPI) using three GPIO lines that
we bitbang to detect the display and enable/disable sleep
state.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-08-11 17:54:54 +03:00
Simon Horman 18b6562c24 fbdev: sh_mipi_dsi: remove driver
Remove the sh_mipi_dsi driver as it appears to be unused since
c0bb9b3027 ("ARCH: ARM: shmobile: Remove ag5evm board support").

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-05-10 11:53:38 +03:00
Geert Uytterhoeven 34280340b1 fbdev: Remove unused SH-Mobile HDMI driver
As of commit 44d88c754e ("ARM: shmobile: Remove legacy SoC code
for R-Mobile A1"), the SH-Mobile HDMI driver is no longer used.
In theory it could still be used on R-Mobile A1 SoCs, but that requires
adding DT support to the driver, which is not planned.

Remove the driver, it can be resurrected from git history when needed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-12-15 15:41:22 +02:00
Sudip Mukherjee 1461d66728 staging: sm7xxfb: merge sm712fb with fbdev
Now since all cleanups are done and the code is ready to be merged lets
move it out of staging into fbdev location.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-07 15:05:01 -07:00
Stephen Boyd a9bd32a8b4 msm: msm_fb: Remove dead code
This code is no longer used now that mach-msm has been removed.
Delete it.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-06-18 09:57:43 +03:00
Linus Torvalds 9e9ac89666 fbdev changes for 3.17
* Much better HDMI infoframe support for OMAP
 * Cirrus Logic CLPS711X framebuffer driver
 * DT support for PL11x CLCD driver
 * Various small fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5LUrAAoJEPo9qoy8lh71G2kP/RyomOV8mOPErkVgslJukMlW
 iJO/Y47GcnHzosKK+7u8MUXlpbBdZjyoaKJxuh+D1OL0vc/LrSar4IwicqqGcD2C
 l5N8b9NytOf+sjtYuD24xkGo9bLr8vkaVNC3cgPNjE/x1kgRrtHoap1NOlv8vvuT
 OnbSkRdg/oENrdzwWjwJeayvT5a3TxLJY5JM9IMTzw6CKROIYScEmHUsy0jH2h/g
 60OrGPdzmPPutUKA/ZWe8Nu0Mhf4GcOeIl8CZ/u7ZyME7NKezyF0iATpMzn3+ylf
 9GafGbsxwgNW2KwoF379w6CV49UNyQhx4qxlkg8/N2km6ot6s1WoJrb/32qPu05J
 Wydfbovxo9elM/144m47a89TR4xV6Ia35kbSDmwrR7gmKjIDUE34Ruc7RdCLdO8n
 SxIG5724pktKlP1bdOT6gCLFnDq6vFK0gNnWwlCRKWnwg0H+Cyg5S07BNEF7/dvO
 gOkRPuyWz3m4rlpl9dL+TW+jaQR/FQAAgf8pUdjBeUTogUTvWf2NBb3H1bKoAnaE
 4fhLwE1qUxep3rhOqOpLbGzDmpvt0ebcNJzseypaSTO9c8QNbZJkxLLC1jchUjPj
 6FP4/SocuySik3on6Qulj6xGrp4zskBnjsTXOIZzxXjByX6uf/DNWPHEcEM9zIEk
 u0trGuXxlx8JkRkV/7aE
 =gXX+
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 - much better HDMI infoframe support for OMAP
 - Cirrus Logic CLPS711X framebuffer driver
 - DT support for PL11x CLCD driver
 - various small fixes

* tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: DSI: fix depopulating dsi peripherals
  video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic
  video: ARM CLCD: Fix DT-related build problems
  drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
  video: ARM CLCD: Add DT support
  drm/omap: Add infoframe & dvi/hdmi mode support
  OMAPDSS: HDMI: remove the unused code
  OMAPDSS: HDMI5: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI4: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields
  OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015
  OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driver
  OMAPDSS: HDMI: remove custom avi infoframe
  OMAPDSS: HDMI5: use common AVI infoframe support
  OMAPDSS: HDMI4: use common AVI infoframe support
  OMAPDSS: Kconfig: select HDMI
  OMAPDSS: HDMI: fix name conflict
  OMAPDSS: DISPC: clean up dispc_mgr_timings_ok
  OMAPDSS: DISPC: reject interlace for lcd out
  OMAPDSS: DISPC: fix debugfs reg dump
  ...
2014-08-08 18:09:33 -07:00
Linus Walleij 11c32d7b62 video: move Versatile CLCD helpers
This moves the Versatile-specific helper code and panel database
down into the drivers/video folder next to the CLCD driver
itself, preserving the config symbol but also moving the header
to platform data.

This is necessary to rid the Integrator of this final <plat/*>
inclusion dependency and get us one less user of the
plat-versatile folder.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-27 10:15:22 +02:00
Alexander Shiyan ef74d46a4e video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver
This adds support for the framebuffer available in the Cirrus
Logic CLPS711X CPUs.
FB features:
- 1-2-4 bits per pixel.
- Programmable panel size to a maximum of 1024x256 at 4 bps.
- Relocatible Frame Buffer (SRAM or SDRAM).
- Programmable refresh rates.
- 16 gray scale values.
This new driver is designed to usage with devicetree only.
The driver have been tested with custom board equipped
Cirrus Logic EP7312.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 10:54:27 +03:00
Tomi Valkeinen 19757fc843 fbdev: move fbdev core files to separate directory
Instead of having fbdev framework core files at the root fbdev
directory, mixed with random fbdev device drivers, move the fbdev core
files to a separate core directory. This makes it much clearer which of
the files are actually part of the fbdev framework, and which are part
of device drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17 08:10:19 +03:00
Tomi Valkeinen f7018c2135 video: move fbdev to drivers/video/fbdev
The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17 08:10:19 +03:00