Commit Graph

20 Commits

Author SHA1 Message Date
Andy Shevchenko 172cb4b3d4 mm/dmapool.c: reuse devres_release() to free resources
Instead of calling an additional routine in dmam_pool_destroy() rely on
what dmam_pool_release() is doing.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:08 -07:00
Daeseok Youn cc6b664aa2 mm/dmapool.c: remove redundant NULL check for dev in dma_pool_create()
"dev" cannot be NULL because it is already checked before calling
dma_pool_create().

If dev ever was NULL, the code would oops in dev_to_node() after enabling
CONFIG_NUMA.

It is possible that some driver is using dev==NULL and has never been run
on a NUMA machine.  Such a driver is probably outdated, possibly buggy and
will need some attention if it starts triggering NULL derefs.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:04 -07:00
Hiroshige Sato 5835f25117 mm: Fix printk typo in dmapool.c
Fix printk typo in dmapool.c

Signed-off-by: Hiroshige Sato <sato.vintage@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-05-05 15:44:47 +02:00
Matthieu CASTET 5de55b265a dmapool: make DMAPOOL_DEBUG detect corruption of free marker
This can help to catch the case where hardware is writing after dma free.

[akpm@linux-foundation.org: tidy code, fix comment, use sizeof(page->offset), use pr_err()]
Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:24 -08:00
Marek Szyprowski 387870f2d6 mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls
dmapool always calls dma_alloc_coherent() with GFP_ATOMIC flag,
regardless the flags provided by the caller. This causes excessive
pruning of emergency memory pools without any good reason. Additionaly,
on ARM architecture any driver which is using dmapools will sooner or
later  trigger the following error:
"ERROR: 256 KiB atomic DMA coherent pool is too small!
Please increase it with coherent_pool= kernel parameter!".
Increasing the coherent pool size usually doesn't help much and only
delays such error, because all GFP_ATOMIC DMA allocations are always
served from the special, very limited memory pool.

This patch changes the dmapool code to correctly use gfp flags provided
by the dmapool caller.

Reported-by: Soeren Moch <smoch@web.de>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org
2012-12-11 09:28:08 +01:00
Paul Gortmaker 7c77509c54 mm: fix implicit stat.h usage in dmapool.c
The removal of the implicitly everywhere module.h and its child includes
will reveal this implicit stat.h usage:

mm/dmapool.c:108: error: ‘S_IRUGO’ undeclared here (not in a function)

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Paul Gortmaker b95f1b31b7 mm: Map most files to use export.h instead of module.h
The files changed within are only using the EXPORT_SYMBOL
macro variants.  They are not using core modular infrastructure
and hence don't need module.h but only the export.h header.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Maxin B John ae891a1b93 devres: fix possible use after free
devres uses the pointer value as key after it's freed, which is safe but
triggers spurious use-after-free warnings on some static analysis tools.
Rearrange code to avoid such warnings.

Signed-off-by: Maxin B. John <maxin.john@gmail.com>
Reviewed-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:14 -07:00
Andrew Morton 684265d4a3 mm/dmapool.c: use TASK_UNINTERRUPTIBLE in dma_pool_alloc()
As it stands this code will degenerate into a busy-wait if the calling task
has signal_pending().

Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:48 -08:00
Rolf Eike Beer 84bc227d7f mm/dmapool.c: take lock only once in dma_pool_free()
dma_pool_free() scans for the page to free in the pool list holding the
pool lock.  Then it releases the lock basically to acquire it immediately
again.  Modify the code to only take the lock once.

This will do some additional loops and computations with the lock held in
if memory debugging is activated.  If it is not activated the only new
operations with this lock is one if and one substraction.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 17:32:48 -08:00
Dima Zavin ea05c8444e mm: add a might_sleep_if() to dma_pool_alloc()
Buggy drivers (e.g.  fsl_udc) could call dma_pool_alloc from atomic
context with GFP_KERNEL.  In most instances, the first pool_alloc_page
call would succeed and the sleeping functions would never be called.  This
allowed the buggy drivers to slip through the cracks.

Add a might_sleep_if() checking for __GFP_WAIT in flags.

Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Thomas Gleixner c49568235d dmapools: protect page_list walk in show_pools()
show_pools() walks the page_list of a pool w/o protection against the list
modifications in alloc/free.  Take pool->lock to avoid stomping into
nirvana.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30 18:56:00 -07:00
Andi Kleen b5ee5befa7 dmapool: enable debugging for CONFIG_SLUB_DEBUG_ON too
Previously it was only enabled for CONFIG_DEBUG_SLAB.

Not hooked into the slub runtime debug configuration, so you currently only
get it with CONFIG_SLUB_DEBUG_ON, not plain CONFIG_SLUB_DEBUG

Acked-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:20 -07:00
Matthew Wilcox e34f44b351 pool: Improve memory usage for devices which can't cross boundaries
The previous implementation simply refused to allocate more than a
boundary's worth of data from an entire page.  Some users didn't know
this, so specified things like SMP_CACHE_BYTES, not realising the
horrible waste of memory that this was.  It's fairly easy to correct
this problem, just by ensuring we don't cross a boundary within a page.
This even helps drivers like EHCI (which can't cross a 4k boundary)
on machines with larger page sizes.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
2007-12-04 10:39:58 -05:00
Matthew Wilcox a35a345514 Change dmapool free block management
Use a list of free blocks within a page instead of using a bitmap.
Update documentation to reflect this.  As well as being a slight
reduction in memory allocation, locked ops and lines of code, it speeds
up a transaction processing benchmark by 0.4%.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-04 10:39:57 -05:00
Matthew Wilcox 6182a0943a dmapool: Tidy up includes and add comments
We were missing a copyright statement and license, so add GPLv2, David
Brownell's copyright and my copyright.

The asm/io.h include was superfluous, but we were missing a few other
necessary includes.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-04 10:39:57 -05:00
Matthew Wilcox 399154be2d dmapool: Validate parameters to dma_pool_create
Check that 'align' is a power of two, like the API specifies.
Align 'size' to 'align' correctly -- the current code has an off-by-one.
The ALIGN macro in kernel.h doesn't.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
2007-12-04 10:39:56 -05:00
Matthew Wilcox 2cae367e48 Avoid taking waitqueue lock in dmapool
With one trivial change (taking the lock slightly earlier on wakeup
from schedule), all uses of the waitq are under the pool lock, so we
can use the locked (or __) versions of the wait queue functions, and
avoid the extra spinlock.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
2007-12-04 10:39:56 -05:00
Matthew Wilcox e87aa77374 dmapool: Fix style problems
Run Lindent and fix all issues reported by checkpatch.pl

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-04 10:39:55 -05:00
Matthew Wilcox 141e9d4b54 Move dmapool.c to mm/ directory
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2007-12-04 10:39:54 -05:00