Commit Graph

413 Commits

Author SHA1 Message Date
Krishna Kumar c9edea298e RDMA/amso1100: Prevent deadlock in destroy QP
It is possible to swap the CQs used for send_cq and recv_cq when
creating two different QPs.  If these two QPs are then destroyed at
the same time, an AB-BA deadlock can occur because the CQ locks are
taken our of order.  Fix this by always taking CQ locks in a fixed
order.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:08 -08:00
Jack Morgenstein 7013696a5f IB/mthca: Fix initial SRQ logsize for mem-free HCAs
When initializing an mthca SRQ, the log_srq_size field should be the
log of the number of SRQ WQEs, not the log of the number of bytes in
the SRQ.

This affects only mthca drivers for memfree HCAs which set the initial
srq wqe counter (in the SW2HW transition) to a non-zero value.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:08 -08:00
Hoang-Nam Nguyen 2771e9ed47 IB/ehca: Use WQE offset instead of WQE addr for pending work reqs
This is a patch for ehca to fix a bug in prepare_sqe_to_rts(), which
used WQE address to iterate pending work requests.  This might cause
an access violation since the queue pages can not be assumed to follow
each other consecutively.  Thus, this patch introduces a few queue
functions to determine WQE offset based on its address and uses WQE
offset to iterate the pending work requests.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:08 -08:00
Roland Dreier e54f81889c IB: Convert kmem_cache_t -> struct kmem_cache
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:07 -08:00
Roland Dreier 53533e16b1 IB/ipath: Fix typo in pma_counter_select subscript
The array has only 5 entries, so [5] should have been [4].

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:07 -08:00
Roland Dreier 29666128a2 RDMA/amso1100: Fix section mismatches
The amso1100 driver was missing a couple of __devinit/__devexit
annotations for init/cleanup functions that are called from
__devinit/__devexit functions.

Reported by Randy Dunlap <randy.dunlap@oracle.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:07 -08:00
Roland Dreier f4f3d0f0ec IB/mthca: Fix section mismatches
Commit b3b30f5e ("IB/mthca: Recover from catastrophic errors")
introduced some section mismatch breakage, because the error recovery
code tears down and reinitializes the device, which calls into lots of
code originally marked __devinit and __devexit from regular .text.

Fix this by getting rid of these now-incorrect section markers.

Reported by Randy Dunlap <randy.dunlap@oracle.com>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
Eric Sesterhenn bed8bdfddd IB: kmemdup() cleanup
Replace open coded kmemdup() to save some screen space, and allow
inlining/not inlining to be triggered by gcc.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-29 15:33:06 -08:00
Bryan O'Sullivan 3f5a6ca31c IB/ipath: Depend on CONFIG_NET
ipath uses skb functions and won't build without CONFIG_NET.

Spotted by Randy Dunlap.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-20 13:06:19 -08:00
Bryan O'Sullivan e757bef270 [PATCH] IB/ipath - fix driver build for platforms with PCI, but not HT
The PCI Express and Hypertransport chip-specific source files should only
be built when the kernel has the capability of actually compiling them.

This fixes the driver build on, for example, ia64.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-16 11:43:37 -08:00
Linus Torvalds 0f66c08e96 Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mad: Fix race between cancel and receive completion
  RDMA/amso1100: Fix && typo
  RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device
  IB/ehca: Activate scaling code by default
  IB/ehca: Use named constant for max mtu
  IB/ehca: Assure 4K alignment for firmware control blocks
2006-11-13 09:52:04 -08:00
Jean Delvare b26c791e9c RDMA/amso1100: Fix && typo
Fix the AMSO1100 firmware version computation, which was broken
due to "&&" being used where "&" should have.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13 09:38:07 -08:00
Tom Tucker 2ffcab6ae4 RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device
Rework some load-time error handling: c2_register_device() leaked when
it failed, and the function that called it didn't check the return code.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13 09:38:04 -08:00
Hoang-Nam Nguyen f2c238a0c5 IB/ehca: Activate scaling code by default
Change ehca's Kconfig to activates scaling code as default.  After
several measurements we saw that this feature prevents dropped packets
(UD) in stress situation. Thus, enabling it helps to improve ehca's
bandwidth through IPoIB.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13 08:46:28 -08:00
Hoang-Nam Nguyen c58121143f IB/ehca: Use named constant for max mtu
Define and use a constant EHCA_MAX_MTU instead hardcoded value.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-13 08:46:28 -08:00
Hoang-Nam Nguyen 7e28db5d8f IB/ehca: Assure 4K alignment for firmware control blocks
Assure 4K alignment for firmware control blocks in 64K page mode,
because kzalloc()'s result address might not be 4K aligned if 64K
pages are enabled. Thus, we introduce wrappers called
ehca_{alloc,free}_fw_ctrlblock(), which use a slab cache for objects
with 4K length and 4K alignment in order to alloc/free firmware
control blocks in 64K page mode. In 4K page mode those wrappers just
are defines of get_zeroed_page() and free_page().

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-09 12:41:57 -08:00
Bryan O'Sullivan 51f65ebccf [PATCH] IB/ipath - program intconfig register using new HT irq hook
Eric's changes to the htirq infrastructure require corresponding
modifications to the ipath HT driver code so that interrupts are still
delivered properly.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08 18:29:25 -08:00
Michael S. Tsirkin 68586b67ab IB/mthca: Fix MAD extended header format for MAD_IFC firmware command
Several fields in an incoming MAD extended info header were passed
into the MAD_IFC firmware command at incorrect offsets (mostly off by
4 bytes).  As the result, the HCA will fail to generate traps in which
this info is needed (e.g. traps which include the GRH of the incoming
packet), in violation of the IB spec.

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-31 10:51:26 -08:00
Steve Wise d7b748d63c IB/amso1100: Fix incorrect pr_debug()
pr_debug() was printing the wrong stuff.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30 20:52:53 -08:00
Steve Wise 8de94ce19d IB/amso1100: Use dma_alloc_coherent() instead of kmalloc/dma_map_single
The Ammasso driver needs to use dma_alloc_coherent() for
allocating memory that will be used by the HW for dma.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30 20:52:52 -08:00
Paul Mackerras 04d03bc576 IB/ehca: Fix eHCA driver compilation for uniprocessor
The eHCA driver does not compile for a uniprocessor configuration
(CONFIG_SMP=n), due to H_SUCCESS and other symbols being undefined.
This fixes it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Hoang-Nam Nguyen <HNGUYEN@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-30 20:52:51 -08:00
Arthur Kepner 1f5c23e2c1 IB/mthca: Use mmiowb after doorbell ring
We discovered a problem when running IPoIB applications on multiple
CPUs on an Altix system. Many messages such as:

ib_mthca 0002:01:00.0: SQ 000014 full (19941644 head, 19941707 tail, 64 max, 0 nreq)

appear in syslog, and the driver wedges up.

Apparently this is because writes to the doorbells from different CPUs
reach the device out of order. The following patch adds mmiowb() calls
after doorbell rings to ensure the doorbell writes are ordered.

Signed-off-by: Arthur Kepner <akepner@sgi.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16 20:22:35 -07:00
Robert Walsh 6ef93dddfe IB/ipath: Initialize diagpkt file on device init only
Don't attempt to set up the diagpkt device in the module init code.
Instead, wait until a piece of hardware is initialized.  Fixes a
problem when loading the ib_ipath module when no InfiniPath hardware
is present: modprobe would go into the D state and stay there.

Signed-off-by: Robert Walsh <robert.walsh@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16 10:06:07 -07:00
Adrian Bunk fb7711e71e RDMA/amso1100: Fix a NULL dereference in error path
This patch fixes a NULL dereference spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Acked-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16 10:06:07 -07:00
Henrik Kretzschmar d986a27413 RDMA/amso1100: pci_module_init() conversion
pci_module_init() convertion in amso1100 driver.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-16 10:06:07 -07:00
Michael S. Tsirkin 2cbe19d48a IB/mthca: Fix off-by-one in mthca SRQ creation
All HCAs (not just mem-free) need a spare SRQ entry, so bump srq->max
by 1 in all cases.

Noted by Jack Morgenstein <jackm@mellanox.co.il>

Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10 12:50:38 -07:00
Roland Dreier 1031bfb93a RDMA/amso1100: Fix build with debugging off
Since pr_debug() has changed from a macro to an inline function when
DEBUG is not defined, its arguments now need to be defined even when
debugging is off.  Therefore to_event_str() and to_qp_state_str() need
to be moved out of #ifdef DEBUG.  The compiler will throw the
definitions away if DEBUG is not defined, but it needs to be able to
see that the functions exist.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10 12:50:38 -07:00
Jack Morgenstein a8bf4e7717 IB/mthca: Query port fix
Fill in "max_vl_num" (encoded according to VLCap field in the PortInfo MAD)
and "init_type_reply" values in the ib_query_port() verb.

Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10 12:50:36 -07:00
Tom Tucker e52e6080ca RDMA/amso1100: Add spinlocks to serialize ib_post_send/ib_post_recv
The AMSO driver was not thread-safe in the post WR code and had
code that would sleep if the WR post FIFO was full. Since these
functions can be called on interrupt level I changed the sleep to a
udelay.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-10 09:51:13 -07:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Dave Jones 038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Hoang-Nam Nguyen e5a0106901 IB/ehca: Tweak trace message format
Add an extra space to make things more readable.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02 14:52:17 -07:00
Hoang-Nam Nguyen 0f248d9cde IB/ehca: Fix device registration
Move the call to ib_register_device() later, since a device should not
be registered until it is completely read to be used.  This fixes
crashes that occur if an upper-layer driver such as IPoIB is loaded
before the ehca module.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-02 14:52:17 -07:00
Ralph Campbell 13b18c8617 IB/ipath: Fix RDMA reads
The PSN used to generate the request following a RDMA read was
incorrect and some state booking wasn't maintained correctly.  This
patch fixes that.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
2006-10-02 14:52:17 -07:00
Serge E. Hallyn 96b644bdec [PATCH] namespaces: utsname: use init_utsname when appropriate
In some places, particularly drivers and __init code, the init utsns is the
appropriate one to use.  This patch replaces those with a the init_utsname
helper.

Changes: Removed several uses of init_utsname().  Hope I picked all the
	right ones in net/ipv4/ipconfig.c.  These are now changed to
	utsname() (the per-process namespace utsname) in the previous
	patch (2/7)

[akpm@osdl.org: CIFS fix]
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Cc: Andrey Savochkin <saw@sw.ru>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:21 -07:00
Dave Hansen d8c76e6f45 [PATCH] r/o bind mount prepwork: inc_nlink() helper
This is mostly included for parity with dec_nlink(), where we will have some
more hooks.  This one should stay pretty darn straightforward for now.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:30 -07:00
Bryan O'Sullivan 3d27b00457 IB/ipath: Fix lockdep error upon "ifconfig ibN down"
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:17:14 -07:00
Bryan O'Sullivan 7a26c47412 IB/ipath: Fix races with ib_resize_cq()
The resize CQ function changes the memory used to store the queue.
Other routines need to honor the lock before accessing the pointer
to the queue and verify that the head and tail are in range.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:17:12 -07:00
Bryan O'Sullivan bf3258ec41 IB/ipath: Support new PCIE device, QLE7142
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:17:10 -07:00
Bryan O'Sullivan c97d27d8a9 IB/ipath: Set CPU affinity early
This change moves around port assignment so that it happens before any
memory is allocated.  This allows memory to be allocated on an appropriate
CPU, which improves performance for users of /dev/ipath.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:17:07 -07:00
Bryan O'Sullivan 1a4e74a087 IB/ipath: Fix EEPROM read when driver is compiled with -Os
The EEPROM is read via programmable I/O pins. When the driver
is compiled -Os, the CPU can speculatively read the I/O
value before it is valid.  This patch fixes the problem.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:17:05 -07:00
Bryan O'Sullivan 89d1e09b6a IB/ipath: Fix and recover TXE piobuf and PBC parity errors
We can sometimes trigger parity errors due to processor speculative
reads to our write-combined memory (mostly seen on Woodcrest).   Add a
stats counter for these.

Factored out the sendbuffererror buffer cancellation code so it can be
used in the new handling; suppress likely subsequent error messages if
within two jiffies of the cancellation.

Also restore 2 dropped TXE lines on hwe_bitsextant noticed while
debugging.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:17:03 -07:00
Bryan O'Sullivan 510847750c IB/ipath: Change HT CRC message to indicate how to resolve problem
The system must be powercycled to clear a HT CRC error; reloading the
driver is not enough.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:17:01 -07:00
Bryan O'Sullivan 7227aac47d IB/ipath: Clean up module exit code
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:16:59 -07:00
Bryan O'Sullivan 957670a57e IB/ipath: Call mtrr_del with correct arguments
We were passing 0 for base and length, which worked on older kernels,
but it doesn't seem to any longer.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:16:57 -07:00
Bryan O'Sullivan 8d0208cb59 IB/ipath: Flush RWQEs if access error or invalid error seen
If the receiver goes into the error state, we need to flush the
posted receive WQEs.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:16:55 -07:00
Bryan O'Sullivan 1fd3b40fde IB/ipath: Improved support for PowerPC
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:16:53 -07:00
Bryan O'Sullivan 076fafcdee IB/ipath: Drop unnecessary "(void *)" casts
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:16:51 -07:00
Bryan O'Sullivan f62fe77ad2 IB/ipath: Support multiple simultaneous devices of different types
Prior to this change, the driver was not able to support a HT and PCIE
card simultaneously present in the same machine.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:16:49 -07:00
Bryan O'Sullivan 5659416207 IB/ipath: Fix mismatch in shifts and masks for printing debug info
Fixed mismatch in linkstate/trainingstate shifts and masks in the
IPATH_IBSTATE_MASK macro.  It kept some linktrainingstates
from being printed correctly in debug; no functionality issue unless
I misread the code.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-09-28 11:16:47 -07:00