Commit Graph

151 Commits

Author SHA1 Message Date
Naveen N. Rao ede7c460b1 bpf: handle 32-bit zext during constant blinding
Since BPF constant blinding is performed after the verifier pass, the
ALU32 instructions inserted for doubleword immediate loads don't have a
corresponding zext instruction. This is causing a kernel oops on powerpc
and can be reproduced by running 'test_cgroup_storage' with
bpf_jit_harden=2.

Fix this by emitting BPF_ZEXT during constant blinding if
prog->aux->verifier_zext is set.

Fixes: a4b1d3c1dd ("bpf: verifier: insert zero extension according to analysis result")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-08-26 23:05:01 +02:00
Josh Poimboeuf 3193c0836f bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()
On x86-64, with CONFIG_RETPOLINE=n, GCC's "global common subexpression
elimination" optimization results in ___bpf_prog_run()'s jumptable code
changing from this:

	select_insn:
		jmp *jumptable(, %rax, 8)
		...
	ALU64_ADD_X:
		...
		jmp *jumptable(, %rax, 8)
	ALU_ADD_X:
		...
		jmp *jumptable(, %rax, 8)

to this:

	select_insn:
		mov jumptable, %r12
		jmp *(%r12, %rax, 8)
		...
	ALU64_ADD_X:
		...
		jmp *(%r12, %rax, 8)
	ALU_ADD_X:
		...
		jmp *(%r12, %rax, 8)

The jumptable address is placed in a register once, at the beginning of
the function.  The function execution can then go through multiple
indirect jumps which rely on that same register value.  This has a few
issues:

1) Objtool isn't smart enough to be able to track such a register value
   across multiple recursive indirect jumps through the jump table.

2) With CONFIG_RETPOLINE enabled, this optimization actually results in
   a small slowdown.  I measured a ~4.7% slowdown in the test_bpf
   "tcpdump port 22" selftest.

   This slowdown is actually predicted by the GCC manual:

     Note: When compiling a program using computed gotos, a GCC
     extension, you may get better run-time performance if you
     disable the global common subexpression elimination pass by
     adding -fno-gcse to the command line.

So just disable the optimization for this function.

Fixes: e55a73251d ("bpf: Fix ORC unwinding in non-JIT BPF code")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/30c3ca29ba037afcbd860a8672eef0021addf9fe.1563413318.git.jpoimboe@redhat.com
2019-07-18 21:01:06 +02:00
Thomas Gleixner 54f698f31e Merge branch 'x86/debug' into core/urgent
Pick up the two pending objtool patches as the next round of objtool fixes
depend on them.
2019-07-18 20:50:48 +02:00
Josh Poimboeuf e55a73251d bpf: Fix ORC unwinding in non-JIT BPF code
Objtool previously ignored ___bpf_prog_run() because it didn't understand
the jump table.  This resulted in the ORC unwinder not being able to unwind
through non-JIT BPF code.

Now that objtool knows how to read jump tables, remove the whitelist and
annotate the jump table so objtool can recognize it.

Also add an additional "const" to the jump table definition to clarify that
the text pointers are constant.  Otherwise GCC sets the section writable
flag and the assembler spits out warnings.

Fixes: d15d356887 ("perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER")
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kairui Song <kasong@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lkml.kernel.org/r/881939122b88f32be4c374d248c09d7527a87e35.1561685471.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-09 13:55:57 +02:00
David S. Miller af144a9834 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Two cases of overlapping changes, nothing fancy.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08 19:48:57 -07:00
Stanislav Fomichev 0d01da6afc bpf: implement getsockopt and setsockopt hooks
Implement new BPF_PROG_TYPE_CGROUP_SOCKOPT program type and
BPF_CGROUP_{G,S}ETSOCKOPT cgroup hooks.

BPF_CGROUP_SETSOCKOPT can modify user setsockopt arguments before
passing them down to the kernel or bypass kernel completely.
BPF_CGROUP_GETSOCKOPT can can inspect/modify getsockopt arguments that
kernel returns.
Both hooks reuse existing PTR_TO_PACKET{,_END} infrastructure.

The buffer memory is pre-allocated (because I don't think there is
a precedent for working with __user memory from bpf). This might be
slow to do for each {s,g}etsockopt call, that's why I've added
__cgroup_bpf_prog_array_is_empty that exits early if there is nothing
attached to a cgroup. Note, however, that there is a race between
__cgroup_bpf_prog_array_is_empty and BPF_PROG_RUN_ARRAY where cgroup
program layout might have changed; this should not be a problem
because in general there is a race between multiple calls to
{s,g}etsocktop and user adding/removing bpf progs from a cgroup.

The return code of the BPF program is handled as follows:
* 0: EPERM
* 1: success, continue with next BPF program in the cgroup chain

v9:
* allow overwriting setsockopt arguments (Alexei Starovoitov):
  * use set_fs (same as kernel_setsockopt)
  * buffer is always kzalloc'd (no small on-stack buffer)

v8:
* use s32 for optlen (Andrii Nakryiko)

v7:
* return only 0 or 1 (Alexei Starovoitov)
* always run all progs (Alexei Starovoitov)
* use optval=0 as kernel bypass in setsockopt (Alexei Starovoitov)
  (decided to use optval=-1 instead, optval=0 might be a valid input)
* call getsockopt hook after kernel handlers (Alexei Starovoitov)

v6:
* rework cgroup chaining; stop as soon as bpf program returns
  0 or 2; see patch with the documentation for the details
* drop Andrii's and Martin's Acked-by (not sure they are comfortable
  with the new state of things)

v5:
* skip copy_to_user() and put_user() when ret == 0 (Martin Lau)

v4:
* don't export bpf_sk_fullsock helper (Martin Lau)
* size != sizeof(__u64) for uapi pointers (Martin Lau)
* offsetof instead of bpf_ctx_range when checking ctx access (Martin Lau)

v3:
* typos in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY comments (Andrii Nakryiko)
* reverse christmas tree in BPF_PROG_CGROUP_SOCKOPT_RUN_ARRAY (Andrii
  Nakryiko)
* use __bpf_md_ptr instead of __u32 for optval{,_end} (Martin Lau)
* use BPF_FIELD_SIZEOF() for consistency (Martin Lau)
* new CG_SOCKOPT_ACCESS macro to wrap repeated parts

v2:
* moved bpf_sockopt_kern fields around to remove a hole (Martin Lau)
* aligned bpf_sockopt_kern->buf to 8 bytes (Martin Lau)
* bpf_prog_array_is_empty instead of bpf_prog_array_length (Martin Lau)
* added [0,2] return code check to verifier (Martin Lau)
* dropped unused buf[64] from the stack (Martin Lau)
* use PTR_TO_SOCKET for bpf_sockopt->sk (Martin Lau)
* dropped bpf_target_off from ctx rewrites (Martin Lau)
* use return code for kernel bypass (Martin Lau & Andrii Nakryiko)

Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-06-27 15:25:16 -07:00
Jiong Wang 75672dda27 bpf: fix BPF_ALU32 | BPF_ARSH on BE arches
Yauheni reported the following code do not work correctly on BE arches:

       ALU_ARSH_X:
               DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
               CONT;
       ALU_ARSH_K:
               DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
               CONT;

and are causing failure of test_verifier test 'arsh32 on imm 2' on BE
arches.

The code is taking address and interpreting memory directly, so is not
endianness neutral. We should instead perform standard C type casting on
the variable. A u64 to s32 conversion will drop the high 32-bit and reserve
the low 32-bit as signed integer, this is all we want.

Fixes: 2dc6b100f9 ("bpf: interpreter support BPF_ALU | BPF_ARSH")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-26 14:48:20 +02:00
Toshiaki Makita e7d4798960 xdp: Add tracepoint for bulk XDP_TX
This is introduced for admins to check what is happening on XDP_TX when
bulk XDP_TX is in use, which will be first introduced in veth in next
commit.

v3:
- Add act field to be in line with other XDP tracepoints.

Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-25 14:26:50 +02:00
David S. Miller 13091aa305 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Honestly all the conflicts were simple overlapping changes,
nothing really interesting to report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17 20:20:36 -07:00
Eric Dumazet a8e11e5c56 sysctl: define proc_do_static_key()
Convert proc_dointvec_minmax_bpf_stats() into a more generic
helper, since we are going to use jump labels more often.

Note that sysctl_bpf_stats_enabled is removed, since
it is no longer needed/used.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14 20:18:27 -07:00
David S. Miller a6cdeeb16b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-07 11:00:14 -07:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Stanislav Fomichev 54e9c9d4b5 bpf: remove __rcu annotations from bpf_prog_array
Drop __rcu annotations and rcu read sections from bpf_prog_array
helper functions. They are not needed since all existing callers
call those helpers from the rcu update side while holding a mutex.
This guarantees that use-after-free could not happen.

In the next patches I'll fix the callers with missing
rcu_dereference_protected to make sparse/lockdep happy, the proper
way to use these helpers is:

	struct bpf_prog_array __rcu *progs = ...;
	struct bpf_prog_array *p;

	mutex_lock(&mtx);
	p = rcu_dereference_protected(progs, lockdep_is_held(&mtx));
	bpf_prog_array_length(p);
	bpf_prog_array_copy_to_user(p, ...);
	bpf_prog_array_delete_safe(p, ...);
	bpf_prog_array_copy_info(p, ...);
	bpf_prog_array_copy(p, ...);
	bpf_prog_array_free(p);
	mutex_unlock(&mtx);

No functional changes! rcu_dereference_protected with lockdep_is_held
should catch any cases where we update prog array without a mutex
(I've looked at existing call sites and I think we hold a mutex
everywhere).

Motivation is to fix sparse warnings:
kernel/bpf/core.c:1803:9: warning: incorrect type in argument 1 (different address spaces)
kernel/bpf/core.c:1803:9:    expected struct callback_head *head
kernel/bpf/core.c:1803:9:    got struct callback_head [noderef] <asn:4> *
kernel/bpf/core.c:1877:44: warning: incorrect type in initializer (different address spaces)
kernel/bpf/core.c:1877:44:    expected struct bpf_prog_array_item *item
kernel/bpf/core.c:1877:44:    got struct bpf_prog_array_item [noderef] <asn:4> *
kernel/bpf/core.c:1901:26: warning: incorrect type in assignment (different address spaces)
kernel/bpf/core.c:1901:26:    expected struct bpf_prog_array_item *existing
kernel/bpf/core.c:1901:26:    got struct bpf_prog_array_item [noderef] <asn:4> *
kernel/bpf/core.c:1935:26: warning: incorrect type in assignment (different address spaces)
kernel/bpf/core.c:1935:26:    expected struct bpf_prog_array_item *[assigned] existing
kernel/bpf/core.c:1935:26:    got struct bpf_prog_array_item [noderef] <asn:4> *

v2:
* remove comment about potential race; that can't happen
  because all callers are in rcu-update section

Cc: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-05-29 15:17:35 +02:00
Jiong Wang a4b1d3c1dd bpf: verifier: insert zero extension according to analysis result
After previous patches, verifier will mark a insn if it really needs zero
extension on dst_reg.

It is then for back-ends to decide how to use such information to eliminate
unnecessary zero extension code-gen during JIT compilation.

One approach is verifier insert explicit zero extension for those insns
that need zero extension in a generic way, JIT back-ends then do not
generate zero extension for sub-register write at default.

However, only those back-ends which do not have hardware zero extension
want this optimization. Back-ends like x86_64 and AArch64 have hardware
zero extension support that the insertion should be disabled.

This patch introduces new target hook "bpf_jit_needs_zext" which returns
false at default, meaning verifier zero extension insertion is disabled at
default. A back-end could override this hook to return true if it doesn't
have hardware support and want verifier insert zero extension explicitly.

Offload targets do not use this native target hook, instead, they could
get the optimization results using bpf_prog_offload_ops.finalize.

NOTE: arches could have diversified features, it is possible for one arch
to have hardware zero extension support for some sub-register write insns
but not for all. For example, PowerPC, SPARC have zero extended loads, but
not for alu32. So when verifier zero extension insertion enabled, these JIT
back-ends need to peephole insns to remove those zero extension inserted
for insn that actually has hardware zero extension support. The peephole
could be as simple as looking the next insn, if it is a special zero
extension insn then it is safe to eliminate it if the current insn has
hardware zero extension support.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-24 18:58:37 -07:00
Daniel Borkmann af959b18fd bpf: fix out of bounds backwards jmps due to dead code removal
systemtap folks reported the following splat recently:

  [ 7790.862212] WARNING: CPU: 3 PID: 26759 at arch/x86/kernel/kprobes/core.c:1022 kprobe_fault_handler+0xec/0xf0
  [...]
  [ 7790.864113] CPU: 3 PID: 26759 Comm: sshd Not tainted 5.1.0-0.rc7.git1.1.fc31.x86_64 #1
  [ 7790.864198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS[...]
  [ 7790.864314] RIP: 0010:kprobe_fault_handler+0xec/0xf0
  [ 7790.864375] Code: 48 8b 50 [...]
  [ 7790.864714] RSP: 0018:ffffc06800bdbb48 EFLAGS: 00010082
  [ 7790.864812] RAX: ffff9e2b75a16320 RBX: 0000000000000000 RCX: 0000000000000000
  [ 7790.865306] RDX: ffffffffffffffff RSI: 000000000000000e RDI: ffffc06800bdbbf8
  [ 7790.865514] RBP: ffffc06800bdbbf8 R08: 0000000000000000 R09: 0000000000000000
  [ 7790.865960] R10: 0000000000000000 R11: 0000000000000000 R12: ffffc06800bdbbf8
  [ 7790.866037] R13: ffff9e2ab56a0418 R14: ffff9e2b6d0bb400 R15: ffff9e2b6d268000
  [ 7790.866114] FS:  00007fde49937d80(0000) GS:ffff9e2b75a00000(0000) knlGS:0000000000000000
  [ 7790.866193] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 7790.866318] CR2: 0000000000000000 CR3: 000000012f312000 CR4: 00000000000006e0
  [ 7790.866419] Call Trace:
  [ 7790.866677]  do_user_addr_fault+0x64/0x480
  [ 7790.867513]  do_page_fault+0x33/0x210
  [ 7790.868002]  async_page_fault+0x1e/0x30
  [ 7790.868071] RIP: 0010:          (null)
  [ 7790.868144] Code: Bad RIP value.
  [ 7790.868229] RSP: 0018:ffffc06800bdbca8 EFLAGS: 00010282
  [ 7790.868362] RAX: ffff9e2b598b60f8 RBX: ffffc06800bdbe48 RCX: 0000000000000004
  [ 7790.868629] RDX: 0000000000000004 RSI: ffffc06800bdbc6c RDI: ffff9e2b598b60f0
  [ 7790.868834] RBP: ffffc06800bdbcf8 R08: 0000000000000000 R09: 0000000000000004
  [ 7790.870432] R10: 00000000ff6f7a03 R11: 0000000000000000 R12: 0000000000000001
  [ 7790.871859] R13: ffffc06800bdbcb8 R14: 0000000000000000 R15: ffff9e2acd0a5310
  [ 7790.873455]  ? vfs_read+0x5/0x170
  [ 7790.874639]  ? vfs_read+0x1/0x170
  [ 7790.875834]  ? trace_call_bpf+0xf6/0x260
  [ 7790.877044]  ? vfs_read+0x1/0x170
  [ 7790.878208]  ? vfs_read+0x5/0x170
  [ 7790.879345]  ? kprobe_perf_func+0x233/0x260
  [ 7790.880503]  ? vfs_read+0x1/0x170
  [ 7790.881632]  ? vfs_read+0x5/0x170
  [ 7790.882751]  ? kprobe_ftrace_handler+0x92/0xf0
  [ 7790.883926]  ? __vfs_read+0x30/0x30
  [ 7790.885050]  ? ftrace_ops_assist_func+0x94/0x100
  [ 7790.886183]  ? vfs_read+0x1/0x170
  [ 7790.887283]  ? vfs_read+0x5/0x170
  [ 7790.888348]  ? ksys_read+0x5a/0xe0
  [ 7790.889389]  ? do_syscall_64+0x5c/0xa0
  [ 7790.890401]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

After some debugging, turns out that the logic in 2cbd95a5c4
("bpf: change parameters of call/branch offset adjustment") has
a bug that is exposed after 52875a04f4 ("bpf: verifier: remove
dead code") in that we miss some of the jump offset adjustments
after code patching when we remove dead code, more concretely,
upon backward jump spanning over the area that is being removed.

BPF insns of a case that was hit pre 52875a04f4b2:

  [...]
  676: (85) call bpf_perf_event_output#-47616
  677: (05) goto pc-636
  678: (62) *(u32 *)(r10 -64) = 0
  679: (bf) r7 = r10
  680: (07) r7 += -64
  681: (05) goto pc-44
  682: (05) goto pc-1
  683: (05) goto pc-1

BPF insns afterwards:

  [...]
  618: (85) call bpf_perf_event_output#-47616
  619: (05) goto pc-638
  620: (62) *(u32 *)(r10 -64) = 0
  621: (bf) r7 = r10
  622: (07) r7 += -64
  623: (05) goto pc-44

To illustrate the bug, situation looks as follows:
     ____
  0 |    | <-- foo: [...]
  1 |____|
  2 |____| <-- pos / end_new  ^
  3 |    |                    |
  4 |    |                    |  len
  5 |____|                    |  (remove region)
  6 |    | <-- end_old        v
  7 |    |
  8 |    | <-- curr  (jmp foo)
  9 |____|

The condition curr >= end_new && curr + off + 1 < end_new in the
branch delta adjustments is never hit because curr + off + 1 <
end_new is compared as unsigned and therefore curr + off + 1 >
end_new in unsigned realm as curr + off + 1 becomes negative
since the insns are memmove()'d before the offset adjustments.

Correct BPF insns after this fix:

  [...]
  618: (85) call bpf_perf_event_output#-47216
  619: (05) goto pc-578
  620: (62) *(u32 *)(r10 -64) = 0
  621: (bf) r7 = r10
  622: (07) r7 += -64
  623: (05) goto pc-44

Note that unprivileged case is not affected from this.

Fixes: 52875a04f4 ("bpf: verifier: remove dead code")
Fixes: 2cbd95a5c4 ("bpf: change parameters of call/branch offset adjustment")
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-10 18:49:27 -07:00
Linus Torvalds 80f232121b Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...
2019-05-07 22:03:58 -07:00
Rick Edgecombe d53d2f78ce bpf: Use vmalloc special flag
Use new flag VM_FLUSH_RESET_PERMS for handling freeing of special
permissioned memory in vmalloc and remove places where memory was set RW
before freeing which is no longer needed. Don't track if the memory is RO
anymore because it is now tracked in vmalloc.

Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190426001143.4983-19-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30 12:37:59 +02:00
Daniel Borkmann d8eca5bbb2 bpf: implement lookup-free direct value access for maps
This generic extension to BPF maps allows for directly loading
an address residing inside a BPF map value as a single BPF
ldimm64 instruction!

The idea is similar to what BPF_PSEUDO_MAP_FD does today, which
is a special src_reg flag for ldimm64 instruction that indicates
that inside the first part of the double insns's imm field is a
file descriptor which the verifier then replaces as a full 64bit
address of the map into both imm parts. For the newly added
BPF_PSEUDO_MAP_VALUE src_reg flag, the idea is the following:
the first part of the double insns's imm field is again a file
descriptor corresponding to the map, and the second part of the
imm field is an offset into the value. The verifier will then
replace both imm parts with an address that points into the BPF
map value at the given value offset for maps that support this
operation. Currently supported is array map with single entry.
It is possible to support more than just single map element by
reusing both 16bit off fields of the insns as a map index, so
full array map lookup could be expressed that way. It hasn't
been implemented here due to lack of concrete use case, but
could easily be done so in future in a compatible way, since
both off fields right now have to be 0 and would correctly
denote a map index 0.

The BPF_PSEUDO_MAP_VALUE is a distinct flag as otherwise with
BPF_PSEUDO_MAP_FD we could not differ offset 0 between load of
map pointer versus load of map's value at offset 0, and changing
BPF_PSEUDO_MAP_FD's encoding into off by one to differ between
regular map pointer and map value pointer would add unnecessary
complexity and increases barrier for debugability thus less
suitable. Using the second part of the imm field as an offset
into the value does /not/ come with limitations since maximum
possible value size is in u32 universe anyway.

This optimization allows for efficiently retrieving an address
to a map value memory area without having to issue a helper call
which needs to prepare registers according to calling convention,
etc, without needing the extra NULL test, and without having to
add the offset in an additional instruction to the value base
pointer. The verifier then treats the destination register as
PTR_TO_MAP_VALUE with constant reg->off from the user passed
offset from the second imm field, and guarantees that this is
within bounds of the map value. Any subsequent operations are
normally treated as typical map value handling without anything
extra needed from verification side.

The two map operations for direct value access have been added to
array map for now. In future other types could be supported as
well depending on the use case. The main use case for this commit
is to allow for BPF loader support for global variables that
reside in .data/.rodata/.bss sections such that we can directly
load the address of them with minimal additional infrastructure
required. Loader support has been added in subsequent commits for
libbpf library.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-09 17:05:46 -07:00
Alexei Starovoitov 4f73379ec5 bpf: verbose jump offset overflow check
Larger programs may trigger 16-bit jump offset overflow check
during instruction patching. Make this error verbose otherwise
users cannot decipher error code without printks in the verifier.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-04 01:27:38 +02:00
Linus Torvalds 203b6609e0 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Lots of tooling updates - too many to list, here's a few highlights:

   - Various subcommand updates to 'perf trace', 'perf report', 'perf
     record', 'perf annotate', 'perf script', 'perf test', etc.

   - CPU and NUMA topology and affinity handling improvements,

   - HW tracing and HW support updates:
      - Intel PT updates
      - ARM CoreSight updates
      - vendor HW event updates

   - BPF updates

   - Tons of infrastructure updates, both on the build system and the
     library support side

   - Documentation updates.

   - ... and lots of other changes, see the changelog for details.

  Kernel side updates:

   - Tighten up kprobes blacklist handling, reduce the number of places
     where developers can install a kprobe and hang/crash the system.

   - Fix/enhance vma address filter handling.

   - Various PMU driver updates, small fixes and additions.

   - refcount_t conversions

   - BPF updates

   - error code propagation enhancements

   - misc other changes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (238 commits)
  perf script python: Add Python3 support to syscall-counts-by-pid.py
  perf script python: Add Python3 support to syscall-counts.py
  perf script python: Add Python3 support to stat-cpi.py
  perf script python: Add Python3 support to stackcollapse.py
  perf script python: Add Python3 support to sctop.py
  perf script python: Add Python3 support to powerpc-hcalls.py
  perf script python: Add Python3 support to net_dropmonitor.py
  perf script python: Add Python3 support to mem-phys-addr.py
  perf script python: Add Python3 support to failed-syscalls-by-pid.py
  perf script python: Add Python3 support to netdev-times.py
  perf tools: Add perf_exe() helper to find perf binary
  perf script: Handle missing fields with -F +..
  perf data: Add perf_data__open_dir_data function
  perf data: Add perf_data__(create_dir|close_dir) functions
  perf data: Fail check_backup in case of error
  perf data: Make check_backup work over directories
  perf tools: Add rm_rf_perf_data function
  perf tools: Add pattern name checking to rm_rf
  perf tools: Add depth checking to rm_rf
  perf data: Add global path holder
  ...
2019-03-06 07:59:36 -08:00
Eric Dumazet 4b9113045b bpf: fix u64_stats_init() usage in bpf_prog_alloc()
We need to iterate through all possible cpus.

Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02 00:31:36 +01:00
Alexei Starovoitov 492ecee892 bpf: enable program stats
JITed BPF programs are indistinguishable from kernel functions, but unlike
kernel code BPF code can be changed often.
Typical approach of "perf record" + "perf report" profiling and tuning of
kernel code works just as well for BPF programs, but kernel code doesn't
need to be monitored whereas BPF programs do.
Users load and run large amount of BPF programs.
These BPF stats allow tools monitor the usage of BPF on the server.
The monitoring tools will turn sysctl kernel.bpf_stats_enabled
on and off for few seconds to sample average cost of the programs.
Aggregated data over hours and days will provide an insight into cost of BPF
and alarms can trigger in case given program suddenly gets more expensive.

The cost of two sched_clock() per program invocation adds ~20 nsec.
Fast BPF progs (like selftests/bpf/progs/test_pkt_access.c) will slow down
from ~10 nsec to ~30 nsec.
static_key minimizes the cost of the stats collection.
There is no measurable difference before/after this patch
with kernel.bpf_stats_enabled=0

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-27 17:22:50 +01:00
Alexei Starovoitov d83525ca62 bpf: introduce bpf_spin_lock
Introduce 'struct bpf_spin_lock' and bpf_spin_lock/unlock() helpers to let
bpf program serialize access to other variables.

Example:
struct hash_elem {
    int cnt;
    struct bpf_spin_lock lock;
};
struct hash_elem * val = bpf_map_lookup_elem(&hash_map, &key);
if (val) {
    bpf_spin_lock(&val->lock);
    val->cnt++;
    bpf_spin_unlock(&val->lock);
}

Restrictions and safety checks:
- bpf_spin_lock is only allowed inside HASH and ARRAY maps.
- BTF description of the map is mandatory for safety analysis.
- bpf program can take one bpf_spin_lock at a time, since two or more can
  cause dead locks.
- only one 'struct bpf_spin_lock' is allowed per map element.
  It drastically simplifies implementation yet allows bpf program to use
  any number of bpf_spin_locks.
- when bpf_spin_lock is taken the calls (either bpf2bpf or helpers) are not allowed.
- bpf program must bpf_spin_unlock() before return.
- bpf program can access 'struct bpf_spin_lock' only via
  bpf_spin_lock()/bpf_spin_unlock() helpers.
- load/store into 'struct bpf_spin_lock lock;' field is not allowed.
- to use bpf_spin_lock() helper the BTF description of map value must be
  a struct and have 'struct bpf_spin_lock anyname;' field at the top level.
  Nested lock inside another struct is not allowed.
- syscall map_lookup doesn't copy bpf_spin_lock field to user space.
- syscall map_update and program map_update do not update bpf_spin_lock field.
- bpf_spin_lock cannot be on the stack or inside networking packet.
  bpf_spin_lock can only be inside HASH or ARRAY map value.
- bpf_spin_lock is available to root only and to all program types.
- bpf_spin_lock is not allowed in inner maps of map-in-map.
- ld_abs is not allowed inside spin_lock-ed region.
- tracing progs and socket filter progs cannot use bpf_spin_lock due to
  insufficient preemption checks

Implementation details:
- cgroup-bpf class of programs can nest with xdp/tc programs.
  Hence bpf_spin_lock is equivalent to spin_lock_irqsave.
  Other solutions to avoid nested bpf_spin_lock are possible.
  Like making sure that all networking progs run with softirq disabled.
  spin_lock_irqsave is the simplest and doesn't add overhead to the
  programs that don't use it.
- arch_spinlock_t is used when its implemented as queued_spin_lock
- archs can force their own arch_spinlock_t
- on architectures where queued_spin_lock is not available and
  sizeof(arch_spinlock_t) != sizeof(__u32) trivial lock is used.
- presence of bpf_spin_lock inside map value could have been indicated via
  extra flag during map_create, but specifying it via BTF is cleaner.
  It provides introspection for map key/value and reduces user mistakes.

Next steps:
- allow bpf_spin_lock in other map types (like cgroup local storage)
- introduce BPF_F_LOCK flag for bpf_map_update() syscall and helper
  to request kernel to grab bpf_spin_lock before rewriting the value.
  That will serialize access to map elements.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-01 20:55:38 +01:00
Valdis Kletnieks de1da68d9c bpf: fix bitrotted kerneldoc
Over the years, the function signature has changed, but the
kerneldoc block hasn't.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-31 10:31:44 +01:00
Jiong Wang a7b76c8857 bpf: JIT blinds support JMP32
This patch adds JIT blinds support for JMP32.

Like BPF_JMP_REG/IMM, JMP32 version are needed for building raw bpf insn.
They are added to both include/linux/filter.h and
tools/include/linux/filter.h.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-26 13:33:01 -08:00
Jiong Wang 503a8865a4 bpf: interpreter support for JMP32
This patch implements interpreting new JMP32 instructions.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-26 13:33:01 -08:00
Jiong Wang 092ed0968b bpf: verifier support JMP32
This patch teach verifier about the new BPF_JMP32 instruction class.
Verifier need to treat it similar as the existing BPF_JMP class.
A BPF_JMP32 insn needs to go through all checks that have been done on
BPF_JMP.

Also, verifier is doing runtime optimizations based on the extra info
conditional jump instruction could offer, especially when the comparison is
between constant and register that the value range of the register could be
improved based on the comparison results. These code are updated
accordingly.

Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-26 13:33:01 -08:00
Jakub Kicinski 52875a04f4 bpf: verifier: remove dead code
Instead of overwriting dead code with jmp -1 instructions
remove it completely for root.  Adjust verifier state and
line info appropriately.

v2:
 - adjust func_info (Alexei);
 - make sure first instruction retains line info (Alexei).
v4: (Yonghong)
 - remove unnecessary if (!insn to remove) checks;
 - always keep last line info if first live instruction lacks one.
v5: (Martin Lau)
 - improve and clarify comments.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-23 17:35:31 -08:00
Jakub Kicinski 2cbd95a5c4 bpf: change parameters of call/branch offset adjustment
In preparation for code removal change parameters to branch
and call adjustment functions to be more universal.  The
current parameters assume we are patching a single instruction
with a longer set.

A diagram may help reading the change, this is for the patch
single case, patching instruction 1 with a replacement of 4:
   ____
0 |____|
1 |____| <-- pos                ^
2 |    | <-- end old  ^         |
3 |    |              |  delta  |  len
4 |____|              |         |  (patch region)
5 |    | <-- end new  v         v
6 |____|

end_old = pos + 1
end_new = pos + delta + 1

If we are before the patch region - curr variable and the target
are fully in old coordinates (hence comparing against end_old).
If we are after the region curr is in new coordinates (hence
the comparison to end_new) but target is in mixed coordinates,
so we just check if it falls before end_new, and if so it needs
the adjustment.

Note that we will not fix up branches which land in removed region
in case of removal, which should be okay, as we are only going to
remove dead code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-23 17:35:31 -08:00
Song Liu 6ee52e2a3f perf, bpf: Introduce PERF_RECORD_BPF_EVENT
For better performance analysis of BPF programs, this patch introduces
PERF_RECORD_BPF_EVENT, a new perf_event_type that exposes BPF program
load/unload information to user space.

Each BPF program may contain up to BPF_MAX_SUBPROGS (256) sub programs.
The following example shows kernel symbols for a BPF program with 7 sub
programs:

    ffffffffa0257cf9 t bpf_prog_b07ccb89267cf242_F
    ffffffffa02592e1 t bpf_prog_2dcecc18072623fc_F
    ffffffffa025b0e9 t bpf_prog_bb7a405ebaec5d5c_F
    ffffffffa025dd2c t bpf_prog_a7540d4a39ec1fc7_F
    ffffffffa025fcca t bpf_prog_05762d4ade0e3737_F
    ffffffffa026108f t bpf_prog_db4bd11e35df90d4_F
    ffffffffa0263f00 t bpf_prog_89d64e4abf0f0126_F
    ffffffffa0257cf9 t bpf_prog_ae31629322c4b018__dummy_tracepoi

When a bpf program is loaded, PERF_RECORD_KSYMBOL is generated for each
of these sub programs. Therefore, PERF_RECORD_BPF_EVENT is not needed
for simple profiling.

For annotation, user space need to listen to PERF_RECORD_BPF_EVENT and
gather more information about these (sub) programs via sys_bpf.

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradeaed.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-21 17:00:57 -03:00
Daniel Borkmann 9b73bfdd08 bpf: enable access to ax register also from verifier rewrite
Right now we are using BPF ax register in JIT for constant blinding as
well as in interpreter as temporary variable. Verifier will not be able
to use it simply because its use will get overridden from the former in
bpf_jit_blind_insn(). However, it can be made to work in that blinding
will be skipped if there is prior use in either source or destination
register on the instruction. Taking constraints of ax into account, the
verifier is then open to use it in rewrites under some constraints. Note,
ax register already has mappings in every eBPF JIT.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-02 16:01:24 -08:00
Daniel Borkmann 144cd91c4c bpf: move tmp variable into ax register in interpreter
This change moves the on-stack 64 bit tmp variable in ___bpf_prog_run()
into the hidden ax register. The latter is currently only used in JITs
for constant blinding as a temporary scratch register, meaning the BPF
interpreter will never see the use of ax. Therefore it is safe to use
it for the cases where tmp has been used earlier. This is needed to later
on allow restricted hidden use of ax in both interpreter and JITs.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-02 16:01:24 -08:00
David S. Miller 2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 11:53:36 -08:00
Daniel Borkmann fdadd04931 bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K
Michael and Sandipan report:

  Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF
  JIT allocations. At compile time it defaults to PAGE_SIZE * 40000,
  and is adjusted again at init time if MODULES_VADDR is defined.

  For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with
  the compile-time default at boot-time, which is 0x9c400000 when
  using 64K page size. This overflows the signed 32-bit bpf_jit_limit
  value:

  root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit
  -1673527296

  and can cause various unexpected failures throughout the network
  stack. In one case `strace dhclient eth0` reported:

  setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8},
             16) = -1 ENOTSUPP (Unknown error 524)

  and similar failures can be seen with tools like tcpdump. This doesn't
  always reproduce however, and I'm not sure why. The more consistent
  failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9
  host would time out on systemd/netplan configuring a virtio-net NIC
  with no noticeable errors in the logs.

Given this and also given that in near future some architectures like
arm64 will have a custom area for BPF JIT image allocations we should
get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For
4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec()
so therefore add another overridable bpf_jit_alloc_exec_limit() helper
function which returns the possible size of the memory area for deriving
the default heuristic in bpf_jit_charge_init().

Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new
bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default
JIT memory provider, and therefore in case archs implement their custom
module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for
vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}.

Additionally, for archs supporting large page sizes, we should change
the sysctl to be handled as long to not run into sysctl restrictions
in future.

Fixes: ede95a63b5 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-11 19:12:21 -08:00
Martin KaFai Lau c454a46b5e bpf: Add bpf_line_info support
This patch adds bpf_line_info support.

It accepts an array of bpf_line_info objects during BPF_PROG_LOAD.
The "line_info", "line_info_cnt" and "line_info_rec_size" are added
to the "union bpf_attr".  The "line_info_rec_size" makes
bpf_line_info extensible in the future.

The new "check_btf_line()" ensures the userspace line_info is valid
for the kernel to use.

When the verifier is translating/patching the bpf_prog (through
"bpf_patch_insn_single()"), the line_infos' insn_off is also
adjusted by the newly added "bpf_adj_linfo()".

If the bpf_prog is jited, this patch also provides the jited addrs (in
aux->jited_linfo) for the corresponding line_info.insn_off.
"bpf_prog_fill_jited_linfo()" is added to fill the aux->jited_linfo.
It is currently called by the x86 jit.  Other jits can also use
"bpf_prog_fill_jited_linfo()" and it will be done in the followup patches.
In the future, if it deemed necessary, a particular jit could also provide
its own "bpf_prog_fill_jited_linfo()" implementation.

A few "*line_info*" fields are added to the bpf_prog_info such
that the user can get the xlated line_info back (i.e. the line_info
with its insn_off reflecting the translated prog).  The jited_line_info
is available if the prog is jited.  It is an array of __u64.
If the prog is not jited, jited_line_info_cnt is 0.

The verifier's verbose log with line_info will be done in
a follow up patch.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-09 13:54:38 -08:00
Jiong Wang 2dc6b100f9 bpf: interpreter support BPF_ALU | BPF_ARSH
This patch implements interpreting BPF_ALU | BPF_ARSH. Do arithmetic right
shift on low 32-bit sub-register, and zero the high 32 bits.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-07 13:30:48 -08:00
Martin KaFai Lau 7337224fc1 bpf: Improve the info.func_info and info.func_info_rec_size behavior
1) When bpf_dump_raw_ok() == false and the kernel can provide >=1
   func_info to the userspace, the current behavior is setting
   the info.func_info_cnt to 0 instead of setting info.func_info
   to 0.

   It is different from the behavior in jited_func_lens/nr_jited_func_lens,
   jited_ksyms/nr_jited_ksyms...etc.

   This patch fixes it. (i.e. set func_info to 0 instead of
   func_info_cnt to 0 when bpf_dump_raw_ok() == false).

2) When the userspace passed in info.func_info_cnt == 0, the kernel
   will set the expected func_info size back to the
   info.func_info_rec_size.  It is a way for the userspace to learn
   the kernel expected func_info_rec_size introduced in
   commit 838e96904f ("bpf: Introduce bpf_func_info").

   An exception is the kernel expected size is not set when
   func_info is not available for a bpf_prog.  This makes the
   returned info.func_info_rec_size has different values
   depending on the returned value of info.func_info_cnt.

   This patch sets the kernel expected size to info.func_info_rec_size
   independent of the info.func_info_cnt.

3) The current logic only rejects invalid func_info_rec_size if
   func_info_cnt is non zero.  This patch also rejects invalid
   nonzero info.func_info_rec_size and not equal to the kernel
   expected size.

4) Set info.btf_id as long as prog->aux->btf != NULL.  That will
   setup the later copy_to_user() codes look the same as others
   which then easier to understand and maintain.

   prog->aux->btf is not NULL only if prog->aux->func_info_cnt > 0.

   Breaking up info.btf_id from prog->aux->func_info_cnt is needed
   for the later line info patch anyway.

   A similar change is made to bpf_get_prog_name().

Fixes: 838e96904f ("bpf: Introduce bpf_func_info")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-05 18:48:40 -08:00
Ard Biesheuvel dc002bb62f bpf: add __weak hook for allocating executable memory
By default, BPF uses module_alloc() to allocate executable memory,
but this is not necessary on all arches and potentially undesirable
on some of them.

So break out the module_alloc() and module_memfree() calls into __weak
functions to allow them to be overridden in arch code.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-05 16:36:28 +01:00
David S. Miller 93029d7d40 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
bpf-next 2018-11-30

The following pull-request contains BPF updates for your *net-next* tree.

(Getting out bit earlier this time to pull in a dependency from bpf.)

The main changes are:

1) Add libbpf ABI versioning and document API naming conventions
   as well as ABI versioning process, from Andrey.

2) Add a new sk_msg_pop_data() helper for sk_msg based BPF
   programs that is used in conjunction with sk_msg_push_data()
   for adding / removing meta data to the msg data, from John.

3) Optimize convert_bpf_ld_abs() for 0 offset and fix various
   lib and testsuite build failures on 32 bit, from David.

4) Make BPF prog dump for !JIT identical to how we dump subprogs
   when JIT is in use, from Yonghong.

5) Rename btf_get_from_id() to make it more conform with libbpf
   API naming conventions, from Martin.

6) Add a missing BPF kselftest config item, from Naresh.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29 18:15:07 -08:00
David S. Miller e561bb29b6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28 22:10:54 -08:00
Yonghong Song ba64e7d852 bpf: btf: support proper non-jit func info
Commit 838e96904f ("bpf: Introduce bpf_func_info")
added bpf func info support. The userspace is able
to get better ksym's for bpf programs with jit, and
is able to print out func prototypes.

For a program containing func-to-func calls, the existing
implementation returns user specified number of function
calls and BTF types if jit is enabled. If the jit is not
enabled, it only returns the type for the main function.

This is undesirable. Interpreter may still be used
and we should keep feature identical regardless of
whether jit is enabled or not.
This patch fixed this discrepancy.

Fixes: 838e96904f ("bpf: Introduce bpf_func_info")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-26 17:57:10 -08:00
Daniel Borkmann e2c95a6165 bpf, ppc64: generalize fetching subprog into bpf_jit_get_func_addr
Make fetching of the BPF call address from ppc64 JIT generic. ppc64
was using a slightly different variant rather than through the insns'
imm field encoding as the target address would not fit into that space.
Therefore, the target subprog number was encoded into the insns' offset
and fetched through fp->aux->func[off]->bpf_func instead. Given there
are other JITs with this issue and the mechanism of fetching the address
is JIT-generic, move it into the core as a helper instead. On the JIT
side, we get information on whether the retrieved address is a fixed
one, that is, not changing through JIT passes, or a dynamic one. For
the former, JITs can optimize their imm emission because this doesn't
change jump offsets throughout JIT process.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-26 17:34:24 -08:00
Yonghong Song 838e96904f bpf: Introduce bpf_func_info
This patch added interface to load a program with the following
additional information:
   . prog_btf_fd
   . func_info, func_info_rec_size and func_info_cnt
where func_info will provide function range and type_id
corresponding to each function.

The func_info_rec_size is introduced in the UAPI to specify
struct bpf_func_info size passed from user space. This
intends to make bpf_func_info structure growable in the future.
If the kernel gets a different bpf_func_info size from userspace,
it will try to handle user request with part of bpf_func_info
it can understand. In this patch, kernel can understand
  struct bpf_func_info {
       __u32   insn_offset;
       __u32   type_id;
  };
If user passed a bpf func_info record size of 16 bytes, the
kernel can still handle part of records with the above definition.

If verifier agrees with function range provided by the user,
the bpf_prog ksym for each function will use the func name
provided in the type_id, which is supposed to provide better
encoding as it is not limited by 16 bytes program name
limitation and this is better for bpf program which contains
multiple subprograms.

The bpf_prog_info interface is also extended to
return btf_id, func_info, func_info_rec_size and func_info_cnt
to userspace, so userspace can print out the function prototype
for each xlated function. The insn_offset in the returned
func_info corresponds to the insn offset for xlated functions.
With other jit related fields in bpf_prog_info, userspace can also
print out function prototypes for each jited function.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-20 10:54:39 -08:00
Song Liu df0734702a bpf: show real jited prog address in /proc/kallsyms
Currently, /proc/kallsyms shows page address of jited bpf program. The
main reason here is to not expose randomized start address. However,
This is not ideal for detailed profiling (find hot instructions from
stack traces). This patch replaces the page address with real prog start
address.

This change is OK because these addresses are still protected by sysctl
kptr_restrict (see kallsyms_show_value()), and only programs loaded by
root are added to kallsyms (see bpf_prog_kallsyms_add()).

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-02 21:39:01 +01:00
Daniel Borkmann ede95a63b5 bpf: add bpf_jit_limit knob to restrict unpriv allocations
Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit 290af86629 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.

Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.

Fixes: 290af86629 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes: 0a14842f5a ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-25 17:11:42 -07:00
Mauricio Vasquez B f1a2e44a3a bpf: add queue and stack maps
Queue/stack maps implement a FIFO/LIFO data storage for ebpf programs.
These maps support peek, pop and push operations that are exposed to eBPF
programs through the new bpf_map[peek/pop/push] helpers.  Those operations
are exposed to userspace applications through the already existing
syscalls in the following way:

BPF_MAP_LOOKUP_ELEM            -> peek
BPF_MAP_LOOKUP_AND_DELETE_ELEM -> pop
BPF_MAP_UPDATE_ELEM            -> push

Queue/stack maps are implemented using a buffer, tail and head indexes,
hence BPF_F_NO_PREALLOC is not supported.

As opposite to other maps, queue and stack do not use RCU for protecting
maps values, the bpf_map[peek/pop] have a ARG_PTR_TO_UNINIT_MAP_VALUE
argument that is a pointer to a memory zone where to save the value of a
map.  Basically the same as ARG_PTR_TO_UNINIT_MEM, but the size has not
be passed as an extra argument.

Our main motivation for implementing queue/stack maps was to keep track
of a pool of elements, like network ports in a SNAT, however we forsee
other use cases, like for exampling saving last N kernel events in a map
and then analysing from userspace.

Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19 13:24:31 -07:00
Daniel Borkmann 604326b41a bpf, sockmap: convert to generic sk_msg interface
Add a generic sk_msg layer, and convert current sockmap and later
kTLS over to make use of it. While sk_buff handles network packet
representation from netdevice up to socket, sk_msg handles data
representation from application to socket layer.

This means that sk_msg framework spans across ULP users in the
kernel, and enables features such as introspection or filtering
of data with the help of BPF programs that operate on this data
structure.

Latter becomes in particular useful for kTLS where data encryption
is deferred into the kernel, and as such enabling the kernel to
perform L7 introspection and policy based on BPF for TLS connections
where the record is being encrypted after BPF has run and came to
a verdict. In order to get there, first step is to transform open
coding of scatter-gather list handling into a common core framework
that subsystems can use.

The code itself has been split and refactored into three bigger
pieces: i) the generic sk_msg API which deals with managing the
scatter gather ring, providing helpers for walking and mangling,
transferring application data from user space into it, and preparing
it for BPF pre/post-processing, ii) the plain sock map itself
where sockets can be attached to or detached from; these bits
are independent of i) which can now be used also without sock
map, and iii) the integration with plain TCP as one protocol
to be used for processing L7 application data (later this could
e.g. also be extended to other protocols like UDP). The semantics
are the same with the old sock map code and therefore no change
of user facing behavior or APIs. While pursuing this work it
also helped finding a number of bugs in the old sockmap code
that we've fixed already in earlier commits. The test_sockmap
kselftest suite passes through fine as well.

Joint work with John.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-15 12:23:19 -07:00
Yonghong Song 965931e3a8 bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
Commit 394e40a297 ("bpf: extend bpf_prog_array to store pointers
to the cgroup storage") refactored the bpf_prog_array_copy_core()
to accommodate new structure bpf_prog_array_item which contains
bpf_prog array itself.

In the old code, we had
   perf_event_query_prog_array():
     mutex_lock(...)
     bpf_prog_array_copy_call():
       prog = rcu_dereference_check(array, 1)->progs
       bpf_prog_array_copy_core(prog, ...)
     mutex_unlock(...)

With the above commit, we had
   perf_event_query_prog_array():
     mutex_lock(...)
     bpf_prog_array_copy_call():
       bpf_prog_array_copy_core(array, ...):
         item = rcu_dereference(array)->items;
         ...
     mutex_unlock(...)

The new code will trigger a lockdep rcu checking warning.
The fix is to change rcu_dereference() to rcu_dereference_check()
to prevent such a warning.

Reported-by: syzbot+6e72317008eef84a216b@syzkaller.appspotmail.com
Fixes: 394e40a297 ("bpf: extend bpf_prog_array to store pointers to the cgroup storage")
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-16 21:55:32 +02:00
Roman Gushchin cd33943176 bpf: introduce the bpf_get_local_storage() helper function
The bpf_get_local_storage() helper function is used
to get a pointer to the bpf local storage from a bpf program.

It takes a pointer to a storage map and flags as arguments.
Right now it accepts only cgroup storage maps, and flags
argument has to be 0. Further it can be extended to support
other types of local storage: e.g. thread local storage etc.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03 00:47:32 +02:00
Roman Gushchin 394e40a297 bpf: extend bpf_prog_array to store pointers to the cgroup storage
This patch converts bpf_prog_array from an array of prog pointers
to the array of struct bpf_prog_array_item elements.

This allows to save a cgroup storage pointer for each bpf program
efficiently attached to a cgroup.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03 00:47:32 +02:00